Wowɔ ha: Fie » Plastik Krataa a Wɔde Yɛ Nneɛma » PVC Krataa » PVC Krataa fitaa

PVC Krataa fitaa

White PVC Kaad Krataa a Wɔyɛ ma Plastic Kaad tintim

HSQY de nkratafa fitaa a ɛyɛ den PVC ma de yɛ plastic kaad , a kaad core nkratafa, offset-printing nkratafa, nkratafa a wotumi tintim inkjet, nkratafa a wɔakyerɛw so, nkratafa a wɔayɛ no frosted ne nneɛma fitaa PVC a wɔde di kaad ka ho. Wɔayɛ saa nkratafa yi ama kaad tintim, lamination, twa ne punching mmom sen structural construction boards.

Mprempren ɔfa no gyina bɛyɛ 0.3 mm fitaa PVC krataa a ɛyɛ den so titiriw wɔ tintim nhyehyɛe a wɔtaa de tintim te sɛ 500 × 765 mm ne 700 × 1000 mm mu. Wobetumi asusuw sɛnea wɔayɛ no sɛnea wɔpɛ, krataa no nsusuwii, kɔla ahorow, nea wɔde awie ne nea wɔde twa nneɛma ho adwuma ama kaad adwumayɛbea ahorow ne mfiri a wɔde tintim nhoma.

Mmuaeɛ tiawa: PVC kaad krataa fitaa ne nneɛma titire a wɔtumi tintim a wɔde yɛ ID kaad, asɔremma kaad, nokwaredi kaad, ahɔhodan mu safe kaad, nsɛm a wɔde hyɛ nkurɔfoɔ nkuran ne plastic agodie kaad. Ɛsɛ sɛ ɛne ɔkwan a wɔfa so tintim, ink nhyehyɛe, overlay film, lamination cycle ne card thickness a etwa to no hyia.

Mprempren HSQY White PVC Nkratafa Nneɛma

Nneɛma asia a wɔabobɔ din mprempren wɔ saa ɔfã yi mu no nyinaa fa kaad ne kaad a wɔde di agoru ho. Ɛnsɛ sɛ wɔde PVC -U engineering plate a ɛyɛ den anaa PVC foam board a emu yɛ hare frafra.

Mprempren Product	Primary Application	Wɔatintim Nkyerɛkyerɛmu Adetɔfo	Paw Beae
PVC Kaad Krataa	General plastic-card core ne krataa a wotumi tintim.	0.3 mm na ɛwɔ hɔ; kɔla fitaa anaa amanne kwan so kɔla; 500 × 765 mm ne 700 × 1000 mm; glossy, matte anaasɛ aburow.	Si offset, screen, UV anaa dijitaal tintim nhyehyɛe ne lamination nhyehyɛe so dua.
Embossed, Frosted anaa Inkjet PVC Krataa	Kaad a ɛhwehwɛ sɛ wɔde matte, aburow anaasɛ baabi titiriw a wotumi tintim.	0.3 mm gyinapɛn; amanne kwan so kɛse ne ne soro; 1000 kg a wɔatintim MOQ.	Si so dua sɛ ebia wɔde inkjet akata krataa no so ampa anaasɛ ɛyɛ offset-printing core a wɔakyerɛw so nkutoo.
White Inkjet PVC Krataa a wɔde yɛ Plastik Kaad	Small-batch anaa desktop inkjet kaad a wɔyɛ.	0.3 mm gyinapɛn; 500 × 765 mm ne 700 × 1000 mm a wɔakyerɛw; custom cutting a ɛwɔ hɔ.	Fa coating to dye anaa pigment ink na sɔ drying, adhesion ne lamination hwɛ.
PVC Krataa a wɔde di agoru	Plastic poker nkrataa, agodie kaad ne nsɛm a wɔde hyɛ nkurɔfo nkuran.	0.3 mm gyinapɛn; glossy, matte anaa aburow; kɔla ne akɛse a wɔahyɛ da ayɛ.	Kyerɛkyerɛ deck feel, flexibility, opacity, ɔkwan a wɔfa so tintim ne card gauge a wɔawie.
PVC Plastic Krataa a Wɔde Di Dwuma Kaad	Playing-card a wɔatintim a ɛtra hɔ kyɛ a wɔyɛ.	0.3 mm gyinapɛn; fitaa a ɛyɛ den PVC ; cutting service.	Hwɛ shuffle te nka, stiffness, surface friction ne edge durability.
Plastik Kaad PVC Nkratafa	ID, asɔremma, promotional ne printed card nsakrae.	0.3 mm na ɛwɔ hɔ; 500 × 765 mm ne 700 × 1000 mm; a wotintimii MOQ 1000 kg.	Si so dua sɛ wɔasisi kaad a etwa to, layers dodow ne overlay compatibility.

Typical HSQY White PVC Kaad Krataa no Nkyerɛkyerɛmu

Agyapadeɛ	a Wɔatintim HSQY Amanneɛbɔ	Adetɔ Akwankyerɛ
Atadeɛ	Polyvinyl chloride krataa a ɛyɛ den a wɔde tintim na wɔdannan kaad.	Si resin a wɔayɛ, plasticizer dodow, stabilizers ne recycled-content nhyehyɛe so dua.
Standard Thickness a Ɛyɛ Fɛ	Bɛyɛ 0.3 mm wɔ mprempren category product nkratafa nyinaa so.	Kyerɛ nominal thickness, tolerance ne susuw kwan.
Nkratafa akɛse a wɔtaa de di dwuma	500 × 765 mm ne 700 × 1000 mm.	Si aburow akwankyerɛ, trim allowance, printing-machine kɛse ne pallet format so dua.
Ahosuo	White sɛ gyinapɛn; ebia kɔla ahorow a wɔayɛ no sɛnea wɔpɛ wɔ hɔ.	Kyerɛkyerɛ fitaa, opacity, sunsuma ne lot-to-lot kɔla tolerance mu.
Ani	Glossy, matte/matte, matte/grain, frosted anaa embossed a wobetumi apaw.	Match no ani ma ink adhesion, laminating ne card te nka.
Nhoma tintim	Mprempren nkratafa a ɛkɔ akyiri no fa offset tintim ho titiriw; asɛmti ahorow a wɔapaw no kyerɛ inkjet.	Mfa no sɛ krataa biako ne ink nhyehyɛe biara yɛ adwuma.
Nneɛma a wɔyɛ	Twitwa ɔsom ne kaad nsakrae applications.	Si lamination, punching, embossing, personalization ne chip-inlay akwan so dua.
Wɔatintim MOQ	1000 kg wɔ mprempren nneɛma a wɔde yɛ nneɛma no ti dodow no ara so.	MOQ a etwa to no gyina ne kɛse, ne kɛse, ne soro, ne kɔla ne nea wɔde ahyɛ mu so.
Tumi a Wɔatintim	Bɛyɛ tɔn 2000 ɔsram biara wɔ mprempren nkratafa a ɛkɔ akyiri so.	Si nhyehyɛe a wɔde bɛma ne nea wɔde bɛkɔ no so dua ma nneɛma a wɔkra no mpɛn pii.
Nkratafa a Wɔde Gu Nneɛma Mu	PE film anaa krataa a ɛyɛ bruu, bɛyɛ kilogram 30 wɔ kotoku biara mu.	Fa bag mu duru si hɔ sɛnea sɛnea wɔde di dwuma ne krataa a ɛyɛ tratraa ahwehwɛde ahorow te.
Pallet a Wɔde Gu Nneɛma Mu	Bɛyɛ 500–1000 kg wɔ pallet biara mu.	Si pallet nsusuwii, nsuo ho banbɔ ne stack sorokɔ so dua.
Nhwɛsoɔ	A4 nhwɛsode ahorow no yɛ referenced ne freight a wɔaboaboa ano.	Ɛsɛ sɛ production approval de printer ne lamination kwan ankasa di dwuma.

Fitaa PVC Kaad Krataa vs Fitaa PVC Foam Board

Ntotoho	Fitaa PVC Kaad Krataa	Fitaa PVC Foam Board
Nhyehyɛeɛ	PVC krataa a ɛyɛ den, ɛyɛ tratraa a ɛyɛ den.	Foamed cellular PVC board a ɛwɔ density a ɛba fam.
Gauge a Wɔtaa De Di Dwuma	Saa ɔfa yi gyina bɛyɛ 0.3 mm krataa so.	Wɔtaa de ma wɔ ne kɛse milimita pii mu.
Dwumadi Titiriw a Wɔde Di Dwuma	Plastic kaad, agodie kaad, tintim ne lamination.	Signage, displays, cabinets, mpaapaemu ne fabrication.
Ɔkwan a Wɔfa so tintim nhoma	Offset, coated inkjet, screen anaa card-printing nhyehyɛe afoforo a egyina grade so.	Digitals, UV anaa screen printing akɛse a egyina ɔfasu so.
Nsakrae	Ntintim, collating, overlay lamination ne punching.	Sawing, routing, fastening, bending ne panel a wɔde si hɔ.
HSQY Ɔfã Adwene	Kaad ne agoru-kaad nneɛma.	Ɛsɛ sɛ PVC foam board category a ɛyɛ soronko de n’ani si adansi ne signage boards so.

White PVC Core Krataa, Inkjet Krataa ne Overlay Film

Material Layer	Function	Nkyerɛkyerɛmu a ɛho hia
White PVC Nkratafa titiriw	Ɛma opacity, stiffness ne printable card nipadua.	Thickness, fitaa, opacity, printability, shrinkage ne lamination bond.
Inkjet-Akata so Fitaa PVC Krataa	Gye ink fi desktop anaa mfiridwuma mu inkjet nhyehyɛe a ɛne no hyia mu.	Coating afã, ink type, drying ahoɔhare, kɔla density, nsu a ɛko tia ne lamination.
Popa PVC Sini a Wɔde Kata So	Ɛbɔ mfonini a wɔatintim ho ban na ebetumi de magnetic stripe, hologram anaa ahobammɔ nneɛma akɔ.	Thickness, gloss, lamination temperature, peel ahoɔden ne soro ayaresa.
Prelam Inlay a wɔde kyerɛw nsɛm	Ɛwɔ RFID, NFC, contactless chip anaa antenna nhyehyɛe ahorow.	Chip gyinabea, antenna nhyehyɛe, krataa format, lamination nhyɛso ne punching dinkyerɛw.
Adhesive anaasɛ Coated Layer	Ɛboa bonding wɔ ɔhyew a ɛba fam anaasɛ specialty card nhyehyɛe ahorow a wɔapaw mu.	Adhesive activation, onyin, blocking, peel ahoɔden ne nea ɛne ne ho hyia.

Core krataa fitaa nyɛ inkjet krataa ankasa, na krataa a wotumi tintim inkjet no nyɛ nea ɛkata so ara kwa. Ɛsɛ sɛ adetɔfo hu kaad layer biara ansa na wɔabisa nneɛma.

Sɛnea Wɔyɛ Plastik Kaad

Adwini ahosiesie: Wɔde kaad mfonini, mmeae a ɛsakra, barcode ne ahobammɔ nneɛma asisi krataa no nhyehyɛe so.
Krataa tintim: Wɔde offset, screen, UV, inkjet anaa dijitaal nhyehyɛe a wɔapene so na ɛtintim anim ne akyi fitaa PVC nkrataa.
Ink a ɛyow anaasɛ ɛyɛ den: Ɛsɛ sɛ krataa a wɔatintim no du nea ɛbata ho na ɛyow sɛnea ɛsɛ ansa na ayɛ biako.
Layer registration: Wɔde core sheets a wɔatintim, overlays ne chip inlays a wobetumi apaw no ahyia.
Lamination: Ɔhyew ne nhyɛso fuse layers no ma ɛyɛ card krataa a ɛyɛ den.
Onwini ne petee: Onwini a wɔahyɛ so no brɛ warpage, shrinkage ne blocking ase.
Punching: Wɔbɔ kaad a wɔawie no sɛnea wɔhwehwɛ ne corner radius.
Personalization: Wobetumi de magnetic stripes, signatures, embossing, laser marking, chips anaa data a ɛsakra aka ho.
Nhwehwɛmu: Wɔhwɛ sɛ kaad no mu duru, tintim din, bond ahoɔden, flatness ne edge quality.

Sɛnea Wobɛpaw Krataa a Ɛyɛ Fɛ a Ɛteɛ

Krataa a ɛyɛ mm 0.3 a wɔatintim no yɛ kaad-core layer a wɔtaa de di dwuma, ɛnyɛ nea ɛkyerɛ sɛ ɛyɛ kaad no mu duru a etwa to. Gauge a etwa to no gyina dodow a wɔatintim core layers, overlay thickness, inlay thickness, adhesive layers ne lamination compression so.

Selection Input	Nea Enti a Ɛho Hia
Kaad a Etwa To a Ɛyɛ Den	Kyerɛ layers dodow ne gauges a ɛho hia.
Single-Sheet anaa Multilayer Adansi	Ebia agodie kaad de nhyehyɛe soronko bedi dwuma wɔ ID anaa smart card a wɔde laminated ayɛ ho.
Overlay a Ɛyɛ Den	Sesa total gauge, stiffness ne graphic ahobammɔ.
Chip anaa Inlay	Ɛde mpɔtam hɔ thickness ka ho na ebetumi ahwehwɛ compensation layers.
Kaad a Wɔde Yɛ Nsakrae	Cores a ɛyɛ tratraa betumi ama wɔanya kaad a ɛyɛ mmerɛw; cores a ɛyɛ den ma ɛyɛ den kɛse.
Nnwinnade a Wɔde Bɔ Punching	Ɛsɛ sɛ laminate stack no kɔ so tra die ne press tumi mu.
Lamination Nhyɛso	Nea etwa to no mu duru betumi ayɛ soronko wɔ akontaabu mu nkabom a ɛwɔ ntoatoaso ankorankoro no ho.

Offset-Ntintim PVC Krataa

Offset tintim ne ɔkwan titiriw a wɔfa so tintim a wɔatwe adwene asi so wɔ HSQY mprempren nneɛma nkratafa a ɛkɔ akyiri no so. Ɛsɛ sɛ kaad krataa a ɛfata ma ink receptivity a ɛkɔ so daa, static a ɛba fam, dimensional stability ne adhesion a wotumi de ho to so wɔ lamination akyi.

Si so dua sɛ ebia wɔde corona ayɛ krataa no anaasɛ wɔde ɔkwan foforo so ayɛ no ani.
Kyerɛ ink nhyehyɛe ne tebea horow a ɛma ɛyɛ hyew anaasɛ ɛyow.
Sɔ solid-color density, nkyerɛwee pa, halftones ne reverse printing hwɛ.
Hwɛ anim-akyi din a wɔakyerɛw wɔ adeyɛ krataa a edi mũ no so.
Sua ink adhesion ansa na woayɛ lamination ne akyi.
Hwɛ sɛnea wosiw ano bere a wɔaboaboa nkrataa a wɔatintim ano no.
Si so dua sɛ aduru a wɔde yɛ nneɛma a ɛwɔ soro no da so ara yɛ nea etu mpɔn denam nneɛma a wɔkora so so.

Inkjet-Printable PVC Krataa a Wɔde Di Dwuma

Inkjet PVC krataa no taa hwehwɛ sɛ wɔde ade a wɔde kata so a wɔayɛ sɛ ɛbɛtwetwe anaasɛ ɛbɛkyekyere ink a wɔapaw no. Offset PVC card core a wɔansa no yareɛ no betumi ama ayɛ drying brɛoo, image density a enye, smearing anaasɛ lamination a ɛyɛ mmerɛw.

Inkjet Selection Factor	a Ɛhwehwɛ sɛ Wɔyɛ Nhwehwɛmu
Printer Ɔkwan a Wɔfa so Yɛ	Desktop krataa-fed, wide-format anaa mfiridwuma inkjet.
Ink Nnuruyɛ Ho Adesua	Dye, pigment, nsu, UV-curable anaa nhyehyɛe foforo a ɛne no hyia.
Ɔfã a Wotumi Print	Ɔfã biako anaa ɔfã abien a wɔde kata so ne loading orientation a ɛteɛ.
Bere a Wɔde Yɛ Nneɛma a Ɛyow	Bere ansa na stacking, atwitwa anaa overlay lamination.
Mfonini a Ɛyɛ Paara	Kɔla a ɛyɛ den, dot gain, fine lines, skin tones ne barcode akenkan.
Nsu ne Abrasion Resistance	Resistance ansa na lamination ne akyi.
Lamination a ɛne ne ho hyia	Ɛnsɛ sɛ coating no bubble, delaminate anaasɛ kɔla sesa bere a ɔhyew ne nhyɛso.

Playing Card PVC Krataa a Wɔhwehwɛ

Plastic agodie nkrataa wɔ adwumayɛ ho nneɛma a ɛsono nea ɛho hia sen ID nkrataa. Ɛsɛ sɛ krataa no kari pɛ wɔ printability, flexibility, opacity, surface friction, shuffle feel ne edge durability.

Kyerɛkyerɛ kaad a wɔawie no kɛse ne deck mu duru mu.
Paw glossy, matte, aburow anaa frosted te nka.
Sɔ bending recovery ne crease resistance hwɛ.
Hwɛ shuffle, dealing ne card-to-card friction.
Si opacity so dua sɛnea ɛbɛyɛ a mfonini ahorow no renkyerɛ denam.
Sɔ ink ne varnish a ɛko tia sɛnea wɔde di dwuma mpɛn pii no hwɛ.
Hwɛ sɛnea punched-edge no yɛ mmerɛw ne sɛnea ntwea so no kyɛ.
Hwɛ sɛnea nsuo a ɛyɛ nwini, ɔhyew ne awɔw mu nneɛma a wɔkora so no yɛ adwuma.
Pene deck a wɔawie so sen sɛ wobɛpene krataa a ɛyɛ tratraa nhwɛsode nkutoo so.

ID, Membership ne Loyalty Card Akwankyerɛ

Adwumayɛfo ne nsrahwɛfo ID nkrataa
Asɔremma ne nokwaredi nkrataa
Ahɔhodan mu safe ho nkrataa
Akyɛde ne nkrataa a wɔatua ho ka dedaw
Kaad ahorow a wɔde hwɛ sɛnea wobetumi akɔ hɔ
Asuafo ne nhomakorabea nkrataa
Nsɛm a wɔde hyɛ nkurɔfo nkuran ne nsɛm a esisi ho nkrataa
Akwahosan ne insurance nkrataa
Kar a wɔde fa kar ne tekiti ho nkrataa
Agodie, poker ne kaad soronko

Sikakorabea, sikatua, SIM, contactless ne aban ID card betumi ahwehwɛ ahobammɔ titiriw, chip, antenna, durability ne compliance specifications. Ɛnsɛ sɛ wɔpene PVC krataa a wotumi tintim a ɛyɛ gyinapɛn so ankasa ma saa aplikeshɔn yi a wonni kaad-nhyehyɛe no mu adansedi mũ.

Surface Finish a Wɔpaw

Surface Finish	Aniwa ne Tactile Effect	Processing Nsusuwii
Glossy a ɛyɛ fɛ	Kɔla a ɛhyerɛn, reflectivity a ɛkorɔn ne premium anim a ɛyɛ mmerɛw.	Ebetumi akyerɛ nsensanee ne nsateaa nkyerɛwee; sɔ ink ne overlay adhesion hwɛ.
Matte / Matte a ɛyɛ den	Hann a ɛba fam wɔ afã abien no nyinaa ne aniwa a ɛyɛ mmerɛw.	Si matte level a ɛkɔ so daa ne print density so dua.
Matte / Aburow a Wɔde Yɛ Nneɛma	Anim biako a ɛyɛ matte ne anim biako a ɛyɛ textured anaa grain.	Hwɛ sɛ tintim fã, lamination fã ne aburow orientation.
Frosted a wɔde ahyɛ mu	Diffused, textured anaa semi-matte anim.	Ebetumi aka tintim a ɛkɔ akyiri yiye ne sɛnea wɔde kata so no yɛ pɛ.
Wɔakyerɛw so	Ɛde nsonsonoe a ɛda nkate ne nneɛma a wɔde siesie fie ka ho.	Pattern depth betumi aka printing, stacking ne lamination.
Wɔde Inkjet a Wɔde Akata So	Onya inkjet ink a ɛne no hyia a ɛyow ntɛmntɛm na mfonini no yɛ kɛse.	Ɛsɛ sɛ wɔbɔ ho ban fi nsu, efĩ ne tintim wɔ afã a ɛnteɛ ho.

Fitaa, Opacity ne Kɔla a Wɔde Di Dwuma

Kaad fitaa no mu titiriw nya kɔla a wɔatintim no pɛpɛɛpɛ, opacity ne sɛnea kaad a wɔawie no te so nkɛntɛnso. PVC nkrataa fitaa abien a ne kɛse yɛ pɛ betumi ama tintim aba ahorow aba esiane pigment loading, undertone ne surface finish nti.

Kyerɛkyerɛ honam fam fitaa gyinapɛn anaa nhwɛsode a wɔapene so a wɔakora so.
Kyerɛ fitaa, L*a*b* kɔla anaa kɔla nsonsonoe a wogye tom wɔ baabi a ɛho hia.
Sua opacity ne show-through bere a woatintim awie no.
Hwɛ sɛnea kɔla hyia wɔ anim ne akyi core nkratafa ntam.
Hwɛ fitaa sunsuma akyi lamination ɔhyew.
Si so dua sɛ ebia wɔma kwan ma wɔde nneɛma a ɛma aniwa yɛ hann anaa nneɛma titiriw a wɔde yɛ nneɛma a ɛyɛ fɛ ho kwan.
Kura batch traceability so ma repeat card nhyehyɛe ahorow.

Dimensional Gyinabea ne Lamination Shrinkage

Printing registration ne card punching gyina krataa no nsusuwii a ɛyɛ den so. PVC kaad krataa no tumi sesa ne nsusuwii bere a wɔretintim, wɔresiesie ne lamination sɛ wɔanhwɛ sɛnea wɔyɛ, aburow kwankyerɛ, nneɛma a wɔkora so anaa ɔhyew a wɔde ba no so a.

Condition krataa a ɛwɔ production room no mu ansa na wɔatintim.
Kyerɛw afiri no kwankyerɛ ne mmeamudua kwankyerɛ.
Sua nsusuwii ahorow ansa na wɔayɛ lamination kyinhyia a wopɛ sɛ woyɛ no ne akyi.
Sɔ anim-akyi dinkyerɛw hwɛ wɔ krataa mũ no nyinaa so.
Fa batch a ɛne no hyia di dwuma ma anim ne akyi core layers.
Control lamination ɔhyew, nhyɛso, onwini ne stack bere.
Kyerɛkyerɛ shrinkage ne warpage a wogye tom mu wɔ adetɔ ho nkyerɛkyerɛmu no mu.

Lamination a ɛne ne ho hyia

Lamination Variable	Possible Defect sɛ ɛnteɛ	a wɔkamfo kyerɛ sɛ Hwɛ
Ahoɔhyeɛ	Bubbles, kɔla a ɛsakra, bond a ɛnnɔɔso anaasɛ shrinkage dodo.	Yɛ ɔhyew mfɛnsere a ɛfa grade pɔtee bi ho.
Nhyɛsoɔ	Bonding a ɛyɛ mmerɛw, emboss a ɛyɛ tratraa dodo anaasɛ inlay a ɛsɛe.	Kari pɛ nhyɛso wɔ platen a ɛyɛ ma no so.
Bere a Wobɛtra Hɔ	Fusion a enni mũ anaasɛ deformation a ɛboro so.	Validate ne layer stack a edi mũ no.
Onwini a wɔde ma	Warped sheets, blocking anaasɛ nsusuwii a entumi nnyina.	Fa no nwini wɔ nhyɛso a wɔahyɛ so ase wɔ baabi a ɛho hia.
Overlay a ɛne ne ho hyia	Delamination, haze anaasɛ peel ahoɔden a enye.	Sɔ overlay ne printed ink system no hwɛ pɛpɛɛpɛ.
Ink a Wɔatintim	Ink a wɔde kɔ baabi foforo, kɔla a ɛsakra, bubbling anaasɛ bond a entumi nyɛ adwuma yiye.	Si so dua sɛ wobɛyow koraa anaasɛ woayɛ no yiye ansa na woayɛ lamination.

Ntintim ne Nsakrae a Ɛyɛ Paara

Quality Item	Nea Enti a Ɛho Hia
Thickness ne Tolerance a ɛyɛ den	Di kaad gauge a etwa to, stiffness ne laminate symmetry so.
Krataa no Kɛse ne Nea Ɛyɛ Ahinanan	Boa aduan, dinkyerɛw ne punching aba.
Flatness a ɛyɛ tratraa	Ɛtew aduan a wɔde ma mmɔho abien, ti a wɔbɔ ne mfomso a ɛba wɔ dinkyerɛw mu no so.
Ahoɔden a ɛwɔ soro	Enya ink a ɛyɛ nsu ne nea ɛbata ho so nkɛntɛnso.
Whiteness ne Opacity a Ɛyɛ Fɛ	Ɛhwɛ print kɔla ne show-through so.
Surface Finish a Wɔde Awie	Kyerɛ print suban, tactile feel ne lamination contact.
Static Level a Ɛwɔ Hɔ	Ɛka nkratafa a wɔtetew mu, mfutuma a ɛtwetwe ne printa a wɔde ma no.
Ntwitwiridii	Ɛnya anim-akyi dinkyerɛw ne punching alignment so nkɛntɛnso.
Lamination Bond a Wɔde Di Dwuma	Siw layer mpaapaemu ano bere a wode kaad redi dwuma no.
Punchability a wɔde bɔ akuturuku	Controls edge quality, burrs ne die nkwa.
Batch Traceability a Wɔde Di Dwuma	Boa nneɛma a wɔyɛ no mpɛn pii ne anwiinwii ho nhwehwɛmu.

Ɔhaw a Ɛtaa Ba ne Nneyɛe a Wɔde Siesie Nneɛma

Ɔhaw Nneɛma	a Ebetumi De Ba	Nhwehwɛmu a Wɔkamfo Kyerɛ
Ink Nkɔ So	Grade a ɛnteɛ, ahoɔden a ɛba fam wɔ soro, efĩ anaa ink a ɛne ne ho nhyia.	Si tintim grade, ayaresa ne ink nhyehyɛe so dua.
Inkjet Nkyerɛwee a Wɔde Smears	Krataa a wɔankata so, ɔfã a wotumi tintim a ɛnteɛ anaasɛ ɛnnɔɔso.	Fa krataa a wɔde akata so a ɛne no hyia di dwuma na fa bere a wɔde bɛyow no yɛ nokware.
Nkratafa a Wɔatintim Block	Ink nnyɛ dry koraa, stack pressure a ɛboro so anaasɛ ɔhyew a ɛkɔ soro.	Tu mpɔn wɔ curing, interleaving ne storage tebea horow mu.
Kaad a Wɔakyekyɛ Mu	Nkatasoɔ a ɛnhyia, ɔhyew a ɛba fam, efĩ anaa ink akwanside a wɔasa.	Validate layer stack ne lamination mfɛnsere no nyinaa.
Kaad Krataa Warps	Layers a ɛnkari pɛ, ɔhyew a ɛnteɛ anaasɛ onwini a ɛnsɛ.	Fa adansi a ɛyɛ pɛpɛɛpɛ ne onwini a wɔahyɛ so di dwuma.
Nsakrae a Ɛsakra Nnipa a Wɔkyerɛw Wɔn Din	Krataa a ɛtwetwe, nsuo, aburow-kwankyerɛ a ɛnhyia anaasɛ printa nhyehyɛe.	Sua shrinkage ne tebea a ɛne no hyia batches.
Punched Edges Yɛ Nneɛma a Ɛyɛ Fɛ	Worn die, brittle krataa anaasɛ laminate hyew a ɛnteɛ.	Hwɛ tooling, grade ne awiei laminate agyapade.
White Shade no gu ahorow	Pigment nsakrae, afrafra batch anaa lamination ɔhyew.	Pene kɔla a wɔde gyina ano so na sie batch nhwɛsode ahorow so.
Agodie Kaad Bata Bom	Gloss a ɛboro so, efĩ a ɛwɔ soro anaasɛ ade a wɔde kata so a ɛne ne ho nhyia.	Sesa wie, varnish ne kaad-to-kaad friction.

RoHS, REACH ne Nnwuma a Wɔde Di Dwuma

Mprempren HSQY nneɛma nkratafa no kyerɛ RoHS ne REACH. Ɛsɛ sɛ adetɔfo bisa nkrataa a ɛkyerɛ sɛnea wɔyɛɛ no pɛpɛɛpɛ, ne kɛse, ne kɔla ne bere a wɔde yɛe sen sɛ wɔde wɛbsaet no nyinaa ho asɛm bedi dwuma sɛ mmara sodi ho kyerɛwtohɔ a etwa to.

Kaad dwumadie nso betumi ahwehwɛ anohyetoɔ ama dadeɛ a emu yɛ duru, phthalates, nneɛma a wɔabara, nneɛma a wɔasan de adi dwuma anaa adetɔfoɔ gyinapɛn pɔtee bi. Ebia sikatua, aban, akwantu ne mmofra nneɛma bɛhwehwɛ sɛ wɔyɛ sɔhwɛ foforo ne ahobammɔ ho nhyehyɛe.

Nneɛma a Wɔasan de adi dwuma ne nea wobetumi asan de adi dwuma bio

PVC kaad krataa no betumi ayɛ nneɛma a wɔasan de adi dwuma bere a wobetumi akura kɔla, tintim, lamination ne mmara adwumayɛ a wɔhwehwɛ no mu. Ɛsɛ sɛ wɔkyerɛw nneɛma a wɔasan de adi dwuma no ma ade pɔtee no sen sɛ wɔde nneɛma a atwa yɛn ho ahyia ho asɛm a emu nna hɔ bɛkyerɛkyerɛ mu.

Kaad a wɔawie no yɛ nneɛma a ɛwɔ ntoatoaso pii na ebetumi ayɛ ink a wɔatintim, sini a wɔde kata so, magnetic stripes, chips, antennas, adhesives ne ahobammɔ nneɛma. Wɔn a wobetumi asan de adi dwuma ankasa no gyina kaad a wɔyɛ ne nhyehyɛe a wɔde boaboa ano na wɔyɛ ho adwuma a ɛwɔ gua a wɔde kɔ baabi a wɔrekɔ no so.

Kwati sɛ wobɛka sɛ PVC kaad biara yɛ nea wotumi de di dwuma bio. Ɔkwan a wobetumi abɔ ho ban kɛse ne sɛ wɔbɛkyerɛ nneɛma a wɔahyehyɛ, atew nneɛma a wɔsɛe no so, akura ɔsom nkwa nna tenten mu na wɔahu ɔkwan a ɛwɔ hɔ a wɔbɛfa so asan anya.

Nneɛma a Wɔde Gu Nneɛma Mu ne Nneɛma a Wɔde Kɔ Amannɔne

Mprempren HSQY nneɛma nkratafa tintim A4 nhwɛsode packing, bɛyɛ 30 kg krataa bags, 500–1000 kg pallets ne reference loading dodow a ɛbɛyɛ tɔn 20 wɔ anammɔn 20-fua ade biara mu.

Si so dua sɛ nkrataa biara wɔ bag biara mu ne bag ahorow wɔ pallet biara mu.
Fa PE film anaa mu ade a wɔde kyekyere nneɛma a nsu ntumi nkɔ mu di dwuma.
Bɔ nkratafa ntwea ho ban na hwɛ ma pallet no nyɛ petee.
Kyerɛkyerɛ pallet sorokɔ ne emu duru a ɛsen biara mu.
Kyerɛ slip sheets, soro boards ne strapping.
Di ɔhyew ne nhyɛso a ebetumi ayɛ nkratafa no so anaasɛ asiw ano no so.
Fa ne kɛse, ne kɛse, ne soro, ne kɔla ne ne batch kyerɛw pallet biara.
Si so dua sɛ worekɔ hyɛn gyinabea, Incoterms ne nneɛma a wɔde yi nneɛma fi mu.
San bu ade dodow a wɔde gu mu no ho akontaa fi pallet nsusuwii a etwa to ne mmara kwan so mu duru anohyeto ahorow mu.

Sɛnea Wɔsɔ White PVC Kaad Krataa Nhwɛsode Hwɛ

Si nhwɛsode no ho so dua: Kyerɛw ne kɛse, ne kɛse, ne kɔla, ne soro ne ne tintim grade.
Fa krataa no si hɔ yiye: Fa sie baabi a wɔyɛ no ansa na woatintim.
Fa printa ankasa no di dwuma: Fa offset, inkjet, screen anaa dijitaal ink nhyehyɛe a wopɛ sɛ woyɛ no di dwuma.
Susuw tintim su: Hwɛ kɔla density, nkyerɛwee fɛfɛ, barcodes, drying ne adhesion.
Si kaad stack a edi mũ: Fa anim core, akyi core, overlays ne optional inlay ka ho.
Laminate stack no: Fa ɔhyew, nhyɛso, tra ne onwini nhyehyɛe a wopɛ sɛ woyɛ no di dwuma.
Sua nneɛma a etwa to: Hwɛ sɛnea ne kɛse, ne petee, ne twetwe, ne bond ne ne opacity.
Punch finished cards: Hwɛ registration, anoano ne ntwea so su.
Sɔ sɛnea wɔde di dwuma ankasa hwɛ: Hwɛ sɛnea wobɔ, wobɔ, sɛnea wodi ho dwuma, wobɔ wo ho ban anaasɛ woyɛ wo sɛnea ɛfata.
Pene sika kɔkɔɔ nhwɛsode so: Fa kaad a wɔapene so no bata nneɛma ne ɔkwan a wɔfa so yɛ no ho nkyerɛkyerɛmu no ho.

Dɛn Nti na Wopaw HSQY ma White PVC Kaad Krataa?

White rigid PVC krataa a ɛtwe adwene si kaad ne agodie-kaad a wɔyɛ so
Wɔatintim gyinapɛn a ɛyɛ bɛyɛ 0.3 mm
Nneɛma akɛse a wɔtaa de yɛ 500 × 765 mm ne 700 × 1000 mm
Glossy, matte, aburow, frosted ne embossed soro options
Offset-printing ne inkjet-printing grades a wɔapaw
White ne amanne-kɔla nkɔso
Amanne kɛse, thickness ne twitwa som
A4 nhwɛsode mmoa ma tintim ne lamination sɔhwɛ ahorow
Wɔatintim nneɛma a wɔyɛ no bɛyɛ tɔn 2000 ɔsram biara
Export packing ma card adwumayɛbea ahorow, printers ne nneɛma kyekyɛfo

HSQY akuw a ɛfa ho no bi ne PVC krataa a wɔde di agoru, PVC krataa ne PVC kaad ho nneɛma . Si URL ahorow a ɛwɔ mu no so dua ansa na woatintim sɛ wo CMS de category aliases ahorow di dwuma a.

Bisa Nhwɛsode ne Bulk Quotation

Sɛ wopɛ sɛ wunya nyansahyɛ ne nsɛm a wɔafa aka a edi mu a, fa:

Kaad no su ne application a etwa to
Offset, inkjet, screen, UV anaa dijitaal tintim nhyehyɛe
Ink brand ne ɔkwan a wɔfa so sa yare
Ɛhwehwɛ sɛ core-sheet thickness ne tolerance
Krataa kɛse ne printing-machine format
White sunsuma, opacity ne amanne-kɔla ahwehwɛde
Glossy, matte, aburow, frosted anaa embossed soro
Overlay-film nhyehyɛe ne ne kɛse
Lamination hyew, nhyɛso ne kyinhyia
Kaad a etwa to no mu duru ne punching format
Ɔsram biara dodow ne afe afe nkɔmhyɛ
Packing, hyɛn gyinabea a wɔde kɔ ne Incoterms
RoHS, REACH anaa nkrataa pɔtee a ɛfa adetɔfoɔ ho a wɔhwehwɛ

Wo ne HSQY nkasa

FAQ Fa White PVC Kaad Nkrataa Ho

Dɛn ne PVC kaad krataa fitaa?

Ɛyɛ krataa a ɛyɛ den a ɛyɛ den PVC a wɔde di dwuma sɛ ade titiriw a wotumi tintim ma plastic kaad ne agodie kaad.

Dɛn na wɔde saa HSQY kuw yi di dwuma titiriw?

Mprempren nneɛma no yɛ nea wɔayɛ titiriw ama ID nkrataa, asɔremma nkrataa, nsɛm a wɔde hyɛ nkurɔfo nkuran, ahɔhodan mu safe nkrataa ne plastic agodie nkrataa.

So eyi ne PVC foam board fitaa yɛ pɛ?

Dabi, kaad krataa yɛ teateaa, ɛyɛ den a ɛyɛ den PVC , bere a PVC foam board yɛ cellular panel a ɛyɛ den a wɔde yɛ nsɛnkyerɛnne, nneɛma a wɔde kyerɛ ne nea wɔyɛ.

Dɛn ne standard thickness no?

Mprempren HSQY nneɛma nkratafa titiriw tintim gyinapɛn a ne kɛse bɛyɛ 0.3 mm, a customization wɔ hɔ.

Nkratafa akɛse bɛn na ɛwɔ hɔ?

Nneɛma akɛse a wɔtaa tintim ne 500 × 765 mm ne 700 × 1000 mm. Wobetumi aka sɛnea wotwitwa nneɛma a wɔahyɛ da ayɛ ho asɛm.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Fitaa yɛ nea wɔahyɛ da ayɛ, na ebia wobetumi anya kɔla ahorow a wɔahyɛ da ayɛ a egyina dodow ne kɔla a wɔapene so.

Nneɛma bɛn na wɔde wie wɔ soro?

Nneɛma a wubetumi apaw bi ne glossy, matte/matte, matte/grain, frosted ne embossed surfaces.

So wobetumi atintim PVC kaad krataa fitaa no offset?

Aane. Offset tintim ne tintim kwan titiriw a wɔatwe adwene asi so wɔ mprempren HSQY nneɛma nkratafa so.

So wobetumi de krataa koro no ara adi dwuma de atintim nhoma a wɔde inkjet ayɛ?

Bere a wɔde akata so anaasɛ wɔayɛ no ɔkwan foforo so ama inkjet nhyehyɛe pɔtee no nkutoo. Standard offset krataa betumi ayɛ smear anaasɛ ayow yiye.

Mɛyɛ dɛn ahu ɔfã a wotumi tintim no?

Ɛsɛ sɛ wɔde nneɛma a wɔde inkjet akata so a ɛkyerɛ ɔfã bi anaa akwankyerɛ ma. Sɔ hwɛ ansa na wɔayɛ no koraa.

So wobetumi atintim krataa no wɔ afã abien no nyinaa?

Kaad-core adansi pii de anim ne akyi nkrataa a wotumi tintim na edi dwuma, nanso ɛsɛ sɛ wosi afã abien no nyinaa a ɛne ne ho hyia no so dua ma grade a wɔapaw no.

Nsonsonoe bɛn na ɛda card core ne overlay film ntam?

Core fitaa no ma opacity ne mfonini a wɔatintim, bere a clear overlay bɔ print no ho ban na ɛboa lamination.

So wobetumi de krataa no adi dwuma de adi kaad?

Aane. HSQY kyerɛw nneɛma pii a wɔde yɛ plastic poker ne playing-card a wɔyɛ.

Dɛn na ɛsɛ sɛ wɔsɔ hwɛ sɛ wɔredi kaad?

Sɔhwɛ sɛnea ɛyɛ mmerɛw, shuffle te nka, opacity, soro friction, print durability, edge su ne wie deck mu duru.

So wobetumi de krataa no adi dwuma de ayɛ RFID anaa smart card?

Ebetumi ayɛ smart-card adansi fã, nanso inlay, antenna, chip gyinabea, lamination ne punching nhyehyɛe no hwehwɛ sɛ wɔde di dwuma wɔ ɔkwan soronko so.

Kaad no mu duru a etwa to bɛn na wobetumi ayɛ?

Awiei koraa no, ne kɛse gyina dodow a core sheets, overlays, inlays, adhesive layers ne lamination compression.

So 0.3 mm kyerɛ sɛ kaad a wɔawie no mu duru yɛ 0.3 mm?

Dabi, 0.3 mm bo no taa kyerɛkyerɛ core krataa biako mu, na ɛnyɛ laminated card a edi mũ no.

Lamination temperature bɛn na ɛsɛ sɛ wɔde di dwuma?

Ɔhyew a ɛfata no gyina core, overlay, ink ne nnwinnade so. Yɛ lamination window a wɔagye atom sen sɛ wode amansan nhyehyɛe biako bedi dwuma.

Dɛn nti na kaad ahorow no twitwiw bere a wɔabɔ no lamination akyi?

Nea ɛtaa de ba ne ntoatoaso a ɛnkari pɛ, aburow no kwan a ɛnsɛ, ɔhyew a ɛboro so, nhyɛso a ɛnteɛ anaasɛ onwini a ɛnsɛ.

Dɛn nti na ink yi fi PVC krataa so?

Nea ebetumi de aba ne ahoɔden a ɛba fam wɔ soro, efĩ, ink a ɛne ne ho nhyia, aduru a enni mũ anaasɛ krataa a ɛnteɛ.

So HSQY betumi ayɛ fitaa ne opacity sɛnea ɔpɛ?

Wobetumi de honam fam nhwɛsode anaa kɔla nkyerɛkyerɛmu a wɔasusuw ho asusuw custom white shades ne opacity targets ho.

So HSQY betumi de embossed anaa frosted krataa ama?

Aane. Mprempren category nneɛma bi ne embossed, frosted, matte ne grain surface options.

Dɛn ne MOQ no?

Mprempren HSQY nneɛma nkratafa dodow no ara tintim MOQ a ɛbɛyɛ 1000 kg. MOQ a etwa to no gyina kɛse, ne kɛse, ne kɔla ne ne soro so.

Dɛn ne ɔkwan a wɔfa so de nneɛma gu mu?

Mprempren nkratafa no kyerɛ bɛyɛ 30 kg wɔ PE-film anaa brown-paper bag biara mu ne 500–1000 kg wɔ pallet biara mu.

So metumi abisa nhwɛsode bi?

Aane. Mprempren nkratafa reference free A4 samples ne freight a wɔaboaboa ano. Fa tintim ne lamination kwan ankasa no sɔ nhwɛsode no hwɛ.

Adansedi nkrataa bɛn na wɔatwe adwene asi so?

Mprempren nneɛma nkratafa kyerɛ RoHS ne REACH. Bisa mprempren nkrataa ma nnuru a wɔde ama no pɛpɛɛpɛ.

So PVC kaad krataa fitaa a wotumi de di dwuma bio?

Nneɛma a wɔbɛsan anya no gyina kaad a wɔasisi no nyinaa ne mpɔtam hɔ PVC nhyehyɛe a wɔde san de di dwuma bio so. Chips, overlays, inks ne magnetic stripes betumi ama nneɛma a wɔsan de di dwuma no ayɛ den.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Fa kaad a wɔde di dwuma, ɔkwan a wɔfa so tintim, ne kɛse, ne kɛse, ne soro, kɔla, nea wɔde kata so, lamination nhyehyɛe, dodow, nea wɔde kyekyere ne baabi a wɔrekɔ ma.

Nneɛma a Wɔde Yɛ Adwuma