HSQY Nnuruyɛ Grade Rigid PVC Blister Film

Nnuruyɛ Grade Rigid PVC Blister Film

HSQY nnuruyɛ grade rigid PVC film no yɛ nea wɔayɛ ama thermoformed blister packaging a tablets, capsules ne afoforo solid-dose nneɛma. Sini no ma wonya nhama a ɛyɛ den a wɔde yɛ akisikuru a wɔde yɛ akisikuru ansa na wɔde nnuru a wɔde kata so a ɛne no hyia ahyɛ mu ma na wɔde ahyɛ mu.

Mprempren HSQY-210616 nneɛma ahorow no kata din mu thicknesses fi 0.12mm kosi 0.30mm a pefee, fitaa ne customized kɔla options. Wobetumi ayɛ roll dimensions sɛnea blister-packaging afiri, tooling nhyehyɛe ne apene adetɔ specification.

Wɔtaa paw PVC a ɛyɛ den a ɛnyɛ den wɔ baabi a ɛho hia sɛ wɔde thermoforming a wotumi de ho to so, nneɛma a wɔde hwɛ nneɛma a wɔde aniwa hu, wɛb a wɔde di dwuma daa ne blister a wɔyɛ no sikasɛm mu ahokyere. Wɔ nnuru a ɛhia nsuo anaa oxygen akwansideɛ a ɛkɔ soro kɛseɛ ho no, ɛsɛ sɛ wɔhwehwɛ akwansideɛ a ɛkorɔn te sɛ PVC/PVDC, PVC/PE/PVDC anaa nnuru foforɔ a ɛfata a wɔde yɛ akisikuru mu wɔ ɔkwan soronko so.

       Bisa Nnuruyɛ PVC Film Quote    

Nnuruyɛ PVC Blister Film Video

Dɛn Ne Nnuru PVC Blister Film?

Nnuru PVC blister film yɛ ade a ɛyɛ den a ɛma ɔhyew a wɔde di dwuma sɛ cavity-forming web wɔ blister packages mu. Bere a wɔrekyekyere no, wɔma PVC ntaban no yɛ hyew, wɔyɛ no ntokuru, de aduru anaa aduru a wɔde hyɛ mu hyɛ mu ma na afei wɔde kata so a ɛne no hyia so.

Wɔ nnuru a wɔdannan no fam no, ɛnyɛ nea wɔpaw sini no nnyina ne kɛse nkutoo so. Nneɛma a ɛho hia ne sɛ ɛyɛ suban, dimensional stability, shrinkage, surface quality, roll flatness, kɔla a ɛkɔ so pɛpɛɛpɛ, core size, winding quality ne compatibility ne blister machine ne lidding system.

Ɛsɛ sɛ wɔpene nneɛma a etwa to no ho nkyerɛkyerɛmu so ma aduru no pɛpɛɛpɛ, blister nhyehyɛe, packaging line, destination gua ne mmara ahwehwɛde ansa na wɔayɛ aguadi.

Nnuru PVC Rigid Film Mfonini ahorow

Nnuru PVC Film Nkyerɛkyerɛmu

Kan no na kratafa no kura PVC pon a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so a ɛkata 0.07–6mm ne nea ɛnyɛ nnuru so. Wɔ saa nnuru yi ho no, mprempren aduru-gyinabea ho nsɛm yɛ 0.12–0.30mm. Ɛsɛ sɛ wɔsi tolerances a etwa to ne roll specifications so dua wɔ technical specification a wɔapene so no mu.

Ahwehwɛde Titiriw a Ɛfa Nnuru PVC Blister Film ho

Thermoforming a Ɛkɔ So Daa

Ɛsɛ sɛ nnuru a wɔde yɛ PVC sini no yɛ akisikuru a ɛkɔ so daa wɔ ɔhyew ne tebea horow a wɔagye atom mu. Forming adwumayɛ gyina film grade, thickness, cavity geometry, heater nhyehyɛe, line ahoɔhare ne forming nhyɛso.

Thickness Uniformity a ɛyɛ pɛ

Gauge nsakrae betumi aka cavity formation, web tension, sealing ne awiei blister consistency. Enti ɛsɛ sɛ wɔde nea wɔfrɛ no thickness ne tolerance ka adetɔ ho nkyerɛkyerɛmu a wɔapene so no ho.

Optical Clarity

Nnuru PVC a emu da hɔ ma nnuru dodow a wɔde ahyɛ mu no kɔ so da adi ma wɔhwɛ mu na wohu. Ɛsɛ sɛ wɔhwɛ nsuyiri, nea ɛda adi pefee ne nea ɛwɔ soro no so sɛnea nneɛma no gyinapɛn a wɔapene so no kyerɛ.

Nsusuwii mu Gyinabea

Stable web dimensions boa ma wɔkura registration, cavity gyinabea, sealing pɛpɛɛpɛ ne ahotoso adwumayɛ wɔ nnuru blister-packaging mfiri.

Ntwitwagye a Wɔhyɛ So

Sɛ ɛtwetwe dodo bere a wɔreyɛ hyew no betumi aka cavity geometry ne registration. Ɛsɛ sɛ wogye ɔhyew nneyɛe tom wɔ blister-line forming temperature ankasa ne ahoɔhare so.

Clean Surface ne Roll Quality

Ɛsɛ sɛ nnuru a wɔdannan no kyerɛkyerɛ anohyeto ahorow a wogye tom ma efĩ, nsensanee tuntum, gel, nsensanee, ahurututu, siw, anoano a ɛsɛe, curl, telescoping ne sintɔ afoforo a ebetumi aka packaging-line adwumayɛ anaasɛ blister a wɔawie no hwɛbea.

Nnuru PVC Blister Packaging Adeyɛ

Plain PVC vs. Nnuru a Ɛyɛ Akwanside a Ɛkorɔn a Wɔde Yɛ Akisikuru Films

PVC a ɛyɛ den a ɛnyɛ den yɛ ade a ɛma ɔhyew a ɛho ka sua, nanso ɛmma nsu anaa mframa pa ho ahobammɔ te sɛ akisikuru a wɔatu ho ama a akwanside kɛse wom no. Enti ɛsɛ sɛ wofi ase paw sini wɔ nnuru a wɔde yɛ nnuru no ahwehwɛde ahorow a ɛma ɛyɛ den no so.

Ɛsɛ sɛ wɔpaw akwanside nhyehyɛe fi nnuru a ɛyɛ den ho nsɛm mu sen sɛ wobesusuw sɛ akwanside a ɛkorɔn sen biara no yɛ ano aduru a eye sen biara anaasɛ ɛho ka sua sen biara no ara kwa.

Homopolymer vs. Copolymer PVC a wɔde yɛ akisikuru

Ɛsɛ sɛ HSQY si PVC a wɔayɛ no pɛpɛɛpɛ a wɔde ma adwuma no so dua sen sɛ ɛbɛka nnuruyɛ mu PVC nyinaa ho asɛm sɛ amansan nyinaa grade biako.

Nnuru PVC Blister Film Dwumadi

Tablet Blister Nneɛma a Wɔde Gu Nneɛma Mu

Wɔtaa de PVC film a ɛyɛ den di dwuma sɛ thermoformed cavity web ma unit-dose tablet blister packs a aduru a wɔapene so no stability profile ma kwan ma wɔde PVC a ɛnyɛ den ahyɛ mu.

Capsule Blister Nneɛma a Wɔde Gu Nneɛma Mu

Mpɛn pii no, capsules hwehwɛ sɛ ɛwɔ abura a emu dɔ sen tablet nketewa, enti ɛsɛ sɛ wɔbom susuw forming depth, film gauge, cavity geometry ne PVC grade ho.

OTC ne Nutraceutical Ntini a Ɛyɛ Fɛ

Wobetumi nso asusuw nnuruyɛ mu PVC a ɛyɛ den a ɛfata ho ama nneɛma a wɔtɔn, vitamin ne nutraceutical solid-dose packaging sɛnea aduru no gyina pintinn ne gua so ahwehwɛde ahorow te.

Mfitiaseɛ Application Mfonini ahorow

Wɔakora mfonini ahorow a edidi so yi so afi kratafa a edi kan no so. Nnuruyɛ mu blister packaging ne SEO titiriw ne ade a wɔde wɔn adwene si so wɔ krataafa yi so; ɛsɛ sɛ wɔfa PVC dwumadie foforɔ sɛ nneɛma a ɛfa ho tumi sen sɛ wɔde nnuru a wɔde yɛ nnuru titire no besi hɔ.

Sɛnea Wobɛpaw Nnuru PVC Blister Film

1. Kyerɛkyerɛ Dosage Form no mu

Kyerɛ sɛ ebia nnuru a wɔde hyɛ ade no mu, nnuru a wɔde hyɛ nipadua mu, nnuru a wɔde yɛ aduannuru anaa ade foforo a wɔde yɛ ade a ɛyɛ den, ne dodow a wɔde ma no nsusuwii.

2. Si Barrier Level a Wɔhwehwɛ no so dua

Fa nnuru a ɛgyina pintinn ho nsɛm di dwuma de hwɛ sɛ ebia PVC a ɛnyɛ den ma ahobammɔ a ɛfata anaasɛ PVDC, PCTFE, aluminium a ɛyɛ nwini anaa nhyehyɛe foforo a akwanside kɛse wom ho hia.

3. Kyerɛ Film Thickness

Mprempren HSQY-210616 nneɛma ahorow no yɛ 0.12–0.30mm. Paw gauge sɛnea cavity bun, web rigidity, forming tebea ne packaging-machine ahwehwɛde.

4. Fa Blister Cavity Drawing no ma

Cavity tenten, ne tɛtrɛtɛ, emu dɔ, corner radius ne draw ratio nya thermoforming suban so nkɛntɛnso na ɛsɛ sɛ wosusuw ho bere a wɔrepaw nneɛma no.

5. Fa Blister Machine no ho nsɛm ma

Fa afiri no yɛfo, mfonini, rotary anaa flat-bed forming system, wɛb trɛw, core ahwehwɛde, line ahoɔhare ne mprempren adwumayɛ tebea ma.

6. Si Lidding Foil a ɛne ne ho hyia no so dua

Ɛsɛ sɛ PVC forming web no ne nnuru a wɔapaw a wɔde kata so ne heat-seal lacquer no yɛ adwuma. Ɛsɛ sɛ wɔgye nsɔano a ɛtwa toɔ hyeɛ, nhyɛsoɔ ne berɛ a wɔde bɛtena hɔ no tom wɔ adeyɛ kwan no so.

7. Kyerɛkyerɛ Kɔla ne Hann-Ahobammɔ Ahwehwɛde ahorow mu

Ɛsɛ sɛ wɔpaw PVC a emu da hɔ anaasɛ ɛwɔ kɔla sɛnea nneɛma a wotumi hu, ahyɛnsode ne hann ho ahobammɔ ahwehwɛde ahorow te. Mma nkyerɛ sɛ wowɔ UV ahobammɔ gye sɛ wɔayɛ grade pɔtee a wɔde ama no na wɔakyerɛw ho asɛm ama saa adwuma no.

8. Si Nnuru Ho Nwoma so dua

Bisa mprempren mfiridwuma, su pa ne mmara ho nkrataa a ɛfa PVC grade a wɔde ama pɛpɛɛpɛ ne beae a wɔyɛ nneɛma a wɔhwehwɛ ma gua a wɔrekɔ no ho pɔtee.

Blister Machine ne Roll Nkyerɛkyerɛmu

Ɛsɛ sɛ wɔde roll nhyehyɛe no hyia nnuru a wɔde yɛ blister afiri no sen sɛ wɔbɛkra denam film no kɛse nkutoo so.

Quality-Control Parameters a Ɛsɛ sɛ Wosi So dua

• Thickness: Nominal gauge ne adwinnan mu abodwokyɛre.

• Trɛw: Slit trɛw ne abodwokyɛre a wɔama ho kwan.

• Density: Si specification a ɛkyerɛ sɛnea wɔayɛ no pɛpɛɛpɛ no so dua.

• Thermal Shrinkage: Hwɛ wɔ ɔhyew ne bere tebea horow a wɔapene so mu.

• Formability: Validate cavity formation wɔ afiri ne nnwinnade a wɔahyɛ da ayɛ no so.

• Nea Ɛda adi pefee ne Ahum: Hwɛ sɛnea aniwa hu no so na ama woanya nnuruyɛ mu nkyerɛwde a emu da hɔ.

• Mfomso a ɛwɔ soro: Kyerɛkyerɛ anohyeto ahorow a ɛwɔ nsensanee tuntum, gel, nsensanee, nhama, ahurututu ne efĩ ho.

• Flatness ne Curl: Ɛho hia ma wɛb tracking ne blister-machine stability.

• Blocking ne Slip: Ɛka unwind ne ahoɔhare kɛse dwumadie.

• Kɔla: Fa gyinapɛn a wɔapene so ma nnuru a wɔde yɛ PVC a wɔde kɔla ayɛ di dwuma.

• Roll Quality: Hwɛ winding, edge alignment, nkwaa, telescoping ne core tebea.

• Traceability: Ɛsɛ sɛ batch identification ne roll labels ne nkrataa a wɔapene so sɛ ɛyɛ papa no hyia.

Mfiridwuma Ho Nsɛm ne Mfitiase PDF Nwoma

Kratafa a edi kan no kura PVC mfiridwuma ho nkrataa a edidi so yi. Wɔn fael din kyerɛ PVC krataa anaa sini ho nsɛm nyinaa, enti ɛsɛ sɛ wɔn a wɔtɔ nnuru bisa mprempren nneɛma pɔtee ho nkrataa ma HSQY-210616 ansa na wɔafata.

           PVC Clear Krataa Data Krataa.pdf    

           PVC Clear Film Data Krataa.pdf    

           PVC Krataa Sɔhwɛ Amanneɛbɔ.pdf    

Nnuruyɛ mu Nneɛma Pa ne Nea Wɔdi So ho Nwoma

Ɛsɛ sɛ nnuru a wɔde kyekyere nneɛma ho ahwehwɛde gyina mprempren nkrataa a ɛfa sini no fã pɔtee a wɔde ama ne beae a wɔyɛ no so sen sɛ wɔde wɔn ho bɛto adansedi krataa mfonini a ɛwɔ hɔ nyinaa nkutoo so.

Ɛgyina gua a wɔrekɔ ne adetɔfoɔ su nhyehyɛeɛ so no, ebia ɛho bɛhia sɛ adetɔfoɔ bisa mfiridwuma ho nsɛm krataa a ɛfata, nhwehwɛmu adansedie krataa, nneɛma ho mpaemuka, nnuru anaa aduane a wɔde di nkitaho ho mmara sodi ho nkrataa, nkaeɛ-monomer ho nsɛm, atutena ho nsɛm, nsusuiɛ nhwehwɛmu aba ne nsusuiɛ ho nkrataa foforɔ a wɔapene so.

Ɛsɛ sɛ wotintim mmara ne nnuruyɛ ho nsɛm bere a mprempren nkrataa a ɛfoa so wɔ aduru pɔtee a wɔde ama no ho nkutoo.

Nsɛm a Ɛho Hia ma Nnuru PVC Quote

Sɛ wopɛ sɛ wunya nsɛm a wɔafa aka a edi mu ne nhwɛso a ɛfata a, fa nsɛm a edidi so yi pii ma sɛnea wubetumi:

• Tablet, capsule anaa ɔkwan foforo a wɔfa so de di dwuma

• PVC a ɛyɛ den a wɔhwehwɛ

• Ɛhwehwɛ sɛ slit trɛw ne ne tɛtrɛtɛ tolerance

• Kɔla a emu da hɔ, fitaa anaa nea wɔhwehwɛ

• Blister cavity twetwe na ɛyɛ bun

• Blister mfiri yɛfo ne ne mfonini

• Rotary anaa flat-bed a ɛyɛ nhyehyɛe

• Mprempren forming ɔhyew ne line ahoɔhare

• Core mu diameter

• Maximum roll abɔnten diameter

• Maximum roll mu duru

• Lidding foil ne ɔhyew-nsɔano lacquer nkyerɛkyerɛmu

• Akwanside gyinabea a wɔhwehwɛ

• Nnuru anaa mmara ho nkrataa a wɔhwehwɛ

• Destination gua so

• Sɔhwɛ dodow ne afe afe a wɔde di dwuma

       Nya Nnuru PVC Film Bo    

Nneɛma a Wɔde Gu Nneɛma Mu ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde ahyɛ mu: Kratafa a ɛwɔ hɔ seesei no kyerɛ nhwɛsoɔ sini a ne kɛseɛ yɛ A4 a wɔde ahyɛ PP bag anaa nnaka mu.

Film Roll Packing: Mprempren nsɛm kyerɛ bɛyɛ 30kg wɔ roll biara mu anaasɛ roll mu duru a wɔayɛ no sɛnea wɔpɛ, a wɔde PE film anaa kraft krataa abɔ ho ban.

Core: Mprempren packing specification no kyerɛ 76mm mu core diameter. Fa blister-machine unwind nhyehyɛe no si core specification a wɔhwehwɛ no so dua.

Pallet Packing: Mprempren nsɛm kyerɛ bɛyɛ 500–2000kg wɔ plywood pallet biara mu a egyina roll nhyehyeɛ ne akwantuo ahwehwɛdeɛ so.

Container Loading: Kratafa a ɛwɔ hɔ dedaw no kyerɛ bɛyɛ tɔn 20 wɔ ade biara mu. Adesoa dodow a etwa to gyina roll dimensions, pallet nhyehyɛe ne container mu duru anohyeto so.

Delivery Terms: EXW, FOB, CNF ne DDU yɛ mprempren listed options.

Reference Lead Time: Mprempren kratafa no kyerɛw bɛyɛ nnafua 7–15 ma nneɛma a wɔkra wɔ adeyɛ a wɔaka ho asɛm no mu, a egyina nneɛma ho nkyerɛkyerɛmu, kɔla, dodow ne adeyɛ nhyehyɛe so.

HSQY Amanaman Ntam Nneɛma a Wɔde Kyerɛkyerɛ

HSQY de ne ho hyɛ amanaman ntam plastic ne nneɛma a wɔde kyekyere nneɛma ho ɔyɛkyerɛ mu de hyia wɔn a wɔdannan nnuru a wɔde kyekyere nneɛma, wɔn a wɔkyekyɛ plastic ne mfiridwuma mu B2B adetɔfo afoforo.

FAQ Fa Nnuruyɛ PVC Blister Film Ho

Dɛn ne nnuruyɛ grade rigid PVC film?

Ɛyɛ thermoforming film a ɛyɛ den a wɔde di dwuma sɛ cavity-forming web wɔ nnuruyɛ mu blister packaging mu. Wɔma PVC no yɛ hyew, wɔyɛ no, wɔde tablets anaa capsules hyɛ mu ma na wɔde ade a ɛne no hyia a wɔde kata so kata so.

Nnuru PVC film a ɛyɛ den bɛn na HSQY de ma?

Mprempren HSQY-210616 nneɛma a wɔakyerɛw no kyerɛ nnuruyɛ mu PVC kɛse a ɛyɛ 0.12mm kosi 0.30mm. Ɛsɛ sɛ wosi gauge ne tolerance pɔtee so dua ansa na wɔakra.

Adɛn nti na kratafa dedaw no kyerɛɛ 0.07mm kosi 6mm?

Saa kwan no yɛ PVC krataa a ɛyɛ den a ɛtrɛw a wɔakyerɛ wɔ mfitiase atirimpɔw nyinaa pon no mu no dea. Mprempren nnuru a wɔde yɛ nnuru ho nkyerɛkyerɛmu a ɛwɔ saa aduru yi kratafa atifi no yɛ 0.12mm kosi 0.30mm na ɛsɛ sɛ wɔde di dwuma ma nnuruyɛ mu akisikuru ho nsɛmmisa.

So PVC a ɛnyɛ den fata ma nnuru biara a wɔde yɛ nnuru?

Dabi PVC a ɛnyɛ den ma ahobammɔ a ɛfata wɔ akisikuru ho nanso ebia ɛrennɔɔso mma nnuru a ɛma nsu anaa oxygen nka kɛse. Ɛsɛ sɛ wɔde aduru no gyinabea ho nsɛm ne bere a wɔhwehwɛ sɛ wɔde sie no paw nneɛma a wɔde bɛkyekyere.

Nsonsonoe bɛn na ɛwɔ PVC ne PVC/PVDC blister film ntam?

Plain PVC ma thermoformable nnyinaso ne gyinapɛn akwanside adwumayɛ. PVC/PVDC de PVDC akwanside ka ho na ama nsuo ne oxygen atumi ako atia nnuru a ɛyɛ mmerɛw kɛse.

Nsonsonoe bɛn na ɛwɔ PVC/PVDC ne PVC/PE/PVDC ntam?

PVC/PVDC taa yɛ akwanside nhyehyɛe a wɔakata so anaasɛ ɛwɔ abien. PVC/PE/PVDC kura PE mfinimfini fã foforo na ɛyɛ ade a wɔde kyekyere nneɛma a ɛwɔ ntoatoaso pii a ɛyɛ soronko. Ɛsɛ sɛ wɔpaw nhyehyɛe a ɛfata sɛnea wɔhyehyɛ ne akwanside ahwehwɛde ahorow te.

Bere bɛn na ɛsɛ sɛ wosusuw PVC/PCTFE anaa Aclar-type blister film ho?

Wobetumi asusuw nneɛma a wɔde laminated a ɛwɔ nsu a ɛyɛ nwini kɛse ho bere a nnuru a wɔde gyina pintinn ho nhwehwɛmu kyerɛ sɛ PVC a ɛnyɛ den anaa PVDC adan a wɔtaa de di dwuma no mfa ahobammɔ a ɛdɔɔso mma no.

So wobetumi de kɔla ayɛ nnuru a wɔde yɛ PVC sini?

Aane. Mprempren HSQY nneɛma a wɔakyerɛw no bi ne nea emu da hɔ, fitaa, kɔkɔɔ, ahabammono ne kɔkɔɔ, a kɔla afoforo a wɔayɛ no sɛnea wɔpɛ a egyina sɛnea wɔayɛ, dodow ne pene so.

So PVC a ɛwɔ kɔla betumi abɔ nnuru a hann nka ho ban?

Ɛnsɛ sɛ wɔfa kɔla nkutoo sɛ adanse a ɛkyerɛ sɛ hann bɔ ho ban. Baabi a ɛho hia sɛ wɔbɔ UV anaa hann a wotumi hu ho banbɔ no, ɛsɛ sɛ wogye sɛnea nnuru no yɛ ne sɛnea wɔde ma no pɛpɛɛpɛ no tom sɛnea aduru no gyina pintinn ho ahwehwɛde ahorow no.

So HSQY betumi ayɛ roll no trɛw sɛnea ɔpɛ?

Aane. Wobetumi ayɛ roll trɛw sɛnea blister afiri ne tooling te. Fa slit trɛw a wɔhwehwɛ ne tolerance ma bere a worebisa quotation.

Core diameter bɛn na ɛwɔ hɔ?

Mprempren mfitiase packing ho nsɛm no kyerɛw 76mm mu core. Si blister afiri no ahwehwɛde pɔtee a ɛfa unwind ho no so dua ansa na woakra.

So PVC sini yi betumi ayɛ adwuma wɔ nnuru a wɔde yɛ akisikuru mfiri so?

Wobetumi ayɛ nnuru PVC grade a ɛne no hyia ho adwuma wɔ thermoforming blister mfiri a ɛfata so wɔ line validation akyi. Mfiri no su, heater nhyehyɛe, forming temperature, cavity depth, line speed ne web tension nyinaa nya adwumayɛ so nkɛntɛnso.

So nnuru a wɔde yɛ PVC betumi asɔ aluminium blister foil ano?

Wɔtaa de nnuruyɛ PVC di dwuma ne aluminium push-through lidding foil a wɔde heat-seal coating a ɛne no hyia di dwuma. Ɛsɛ sɛ wɔde PVC a wɔde ama no di foil, lacquer ne sealing tebea pɔtee no ho adanse.

Mfomso bɛn na ɛsɛ sɛ wodi so wɔ nnuru a wɔde yɛ PVC sini mu?

Ɛsɛ sɛ adetɔfo de anohyeto ahorow si hɔ ma nsakrae a ɛba ne kɛse mu, nsensanee tuntum, gel, mpataa aniwa, nsensanee, ahurututu, efĩ, kurukuruwa, siw, ɔfasu so sintɔ, anoano a ɛsɛe, nkwaa ne roll-winding su.

Nwoma bɛn na ɛsɛ sɛ wɔn a wɔtɔ nnuru bisa?

Bisa mprempren mfiridwuma, nhwehwɛmu, su pa ne mmara ho nkrataa a ɛfa nneɛma grade pɔtee ne beae a wɔyɛ a adetɔfo no su nhyehyɛe ne baabi a wɔrekɔ gua no hwehwɛ.

Dɛn ne MOQ no?

Mprempren HSQY nneɛma a wɔakyerɛw no kyerɛ MOQ a ɛyɛ 2000kg. Kɔla soronko, ntrɛwmu anaa nnuru a wɔde yɛ no betumi ahwehwɛ sɛ wɔde dodow soronko di gua.

So metumi abisa nhwɛsode ansa na wɔayɛ no kɛse?

Wobetumi asusuw nhwɛsode nhwehwɛmu ho de ahwɛ sɛnea ɛte, ne kɛse, thermoforming, cavity formation, mfiri a ɛretu mmirika ne lidding compatibility ansa na wɔapene so wɔ aguadi mu.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Fa thickness, trɛw, kɔla, core size, roll diameter, blister machine, cavity drawing, dosage form, lidding material, destination gua, nkrataa a wɔhwehwɛ ne afe afe ahwehwɛde ma.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de PVC sini a ɛyɛ den ne nnuru a ɛfa ho a wɔde kyekyere nneɛma ho ma amanaman ntam nnuru a wɔde kyekyere nneɛma a wɔdannan, wɔn a wɔkyekyɛ ne mfiridwuma mu adetɔfo.

HSQY betumi aboa PVC a wɔayɛ no sɛnea wɔpɛ, slit trɛw, kɔla, roll nhyehyɛe, nhwɛsode, packing ne export supply sɛnea adwuma no ho nkyerɛkyerɛmu a wɔapene so no kyerɛ.

Wɔ nnuruyɛ adwuma mu no, ma blister afiri, cavity drawing, nnuru sensitivity, ahwehwɛde akwanside level, botae gua ne afe afe volume sɛnea ɛbɛyɛ a wobetumi asusuw adwuma no ho afata plain PVC anaasɛ higher-barrier blister-film nhyehyɛe.

       Wo ne HSQY nkasa na woanya Nnuruyɛ PVC Film