Lidding Film Kompatibiliti Chat fɔ CPET, APET, PET/PE ɛn PP Trey dɛn

Lidding Film Kompatibiliti Matris fɔ CPET, APET, PET/PE ɛn PP Trey dɛn

Dɛn kin pik di kɔrɛkt liding film bay we dɛn de mach in ɔt-sil layt to di matirial we de na di trey flɛnch—nɔto jɔs to di matirial we dɛn gi di nem na di trey spɛsifikɛshɔn.

Dis difrɛns impɔtant mɔ we yu de sɔs lidding film fɔ PET trey aplikeshɔn dɛn. Wan APET trey nɔmal fɔ prɛzɛnt wan PET silin sɔfays, we wan PET/PE trey kin prɛzɛnt PE na di flɛnch. Pan ɔl we ɔl tu di tre dɛn gɛt PET, bɔku tɛm dɛn kin nid difrɛn tin dɛn we dɛn kin yuz fɔ silin wit lid-film.

Di chɔt we de kam biɛn ya de gi prɛktikal statin pɔynt fɔ fim sɛlɛkshɔn ɛn layn trayal.

* Dɛn tɛmpracha ya na skrinin rɛnj, nɔto garanti prodakshɔn sɛtin. Low-seal-initiation ɛn universal film dɛn kin wok ausayd dɛn rɛnj ya. Ɔltɛm bigin wit di fim spɔlayt in tɛknikal data shit ɛn chɛk di winda na di rial mashin.

† Savis tɛmpracha de diskrayb di stɔrɔj ​​ɔ rihit kɔndishɔn. I nɔ di sem wit di tɛmpracha we de na di silin-jaw. Ɛvri ɔvin, maykrowev, friza ɔ ritɔt klem fɔ aplay to di kɔmplit trey–film–fud sistɛm.

Wetin Mek di Trey in Flange Surface De Ditarmin Kɔmpatibiliti

Wan liding film nɔmal wan gɛt sɔm funkshɔnal layers:

• Wan ɔda PET ɔ BOPET layt fɔ trɛnk, klia, dimɛnshɔnal stebiliti ɛn fɔ print

• Wan opshɔnal EVOH, kɔtin ɔ ɔda barɛri layt

• Wan laminating adhesive ɔ tay layt

• Wan insay ɔt-sil layt we de mek dairekt kɔntakt wit di trey flɛnch

• Opshɔnal anti-fɔg, peel ɔ ventin funkshɔnaliti

Na di layt we de insay di ɔt-sil nɔmɔ de mek di bond to di trey. I kemistri fɔ kɔmpitabl wit di polima ɔ kɔtin we de na di flɛnch.

Dis na di rizin we mek wan fim we dɛn diskrayb ɔl as 'PET lidding film' nɔ kin ɔtomɛtik fit fɔ ɛvri tre we gɛt PET. Di ɔta kyaria kin bi PET, we di silin kin bi PE, PP ɔ wan prɔpriet yunivasal kɔtin.

Bifo yu ɔda, kɔnfɔm:

1. Di trey in kɔmplit strɔkchɔ, nɔto jɔs in jenɛral matirial nem

2. Us layt de ɛksplɔz pan di silin flɛnch

3. If di flɛnch gɛt kɔtin, sil skin ɔ risaykul-kɔntinɛnt fɔmyulashɔn

4. If di klos we dɛn nid na izi fɔ pul, rilis ɔt ɔ lɔk sil

5. Di stɔrɔj, distribyushɔn ɛn rihit saykl fɔ di kɔmplit paket

Wetin Na di Bɛst Fim fɔ CPET Trey?

Wan film fɔ CPET trey aplikeshɔn fɔ nɔmal fɔ yuz wan dimɛnshɔnal stebul PET ɔ BOPET kyaria wit CPET-kɔmpatibl ɔt-sil kɔtin. If di paket go go insay kɔmɔn ɔvin wit di lid we dɛn tay, ɔl di kɔmpɔnɛnt dɛn fɔ kwalifay fɔ di ɔvin tɛmpracha ɛn tɛm we dɛn dɔn tɔk bɔt.

Dat kwalifayeshɔn inklud di fim, ɔt-sil kɔtin, laminat adeziv, ink, anti-fɔg tritmɛnt, trey flɛnch ɛn print kɔshɔma instrɔkshɔn dɛn.

Pik di CPET peel bihayv bay aplikeshɔn

• Kol izi peel: Di konsuma de pul di lid bifo i hot. Di sil fɔ stil sikrit tru kol ɔ frɔzɛn distribyushɔn bɔt i fɔ opin klin wan we dɛn de pripia.

• Hɛt-rilis peel: Di fim kin kɔntinyu fɔ sidɔm we dɛn de kip am ɛn i kin rilis ɔ vent di we we dɛn kin kɔntrol we dɛn de ɔt di it.

• Pil-bak ɔ vent ɔt: Di kɔshɔma kin pul pat pan am, pier ɔ opin vent we dɛn dɔn mek bifo i ɔt am na maykrowev ɔ ɔvin.

• Lɔk sil: Dɛn kin yuz pɔrmanent klos usay dɛn nid fɔ gɛt maksimal sikyɔriti ɛn dɛn kin opin di lid bay we dɛn kɔt ɔ te.

CPET trey kin gɛt difrɛn sɔfayz fɔmyulashɔn ɔ wan amorphous PET sil skin. So, tu trey we dɛn ɔl tu de sɛl as CPET kin prodyuz difrɛn sil trɛnk wit di sem film.

Nɔ infɛr ovenability frɔm di PET ɔta layt

Wan jenɛrik PET/PE laminat nɔ kin ɔtomɛtik ɔvinable. Pan ɔl we di PET kyaria kin telɛ di tɛmpracha we go ɔp, di PE silan, adeziv, printin ink ɛn anti-fɔg tritmɛnt kin gɛt lɔwa limit.

Yuz wan fim gred nɔmɔ we dɛn validet fɔ:

• Di ekzak CPET trey

• Maksimal tɛmpracha na di ɔvin

• Di tɛm we dɛn kin yuz fɔ ɔt

• Fɔd tayp ɛn fil wet

• If di lid de kɔntinyu fɔ tay ful wan

• Instrɔkshɔn dɛn we dɛn nid fɔ mek fɔ pul di briz ɔ fɔ pul di wata bak

Aw fɔ Pik Lidding Film fɔ APET ɛn rPET Trey

APET na tin we dɛn kin yuz fɔ it tin dɛn we dɛn dɔn kol, fɔ mek tin dɛn we dɛn kin mek, fɔ mek tin dɛn we dɛn kin mek bekɛri, salad, tin dɛn we dɛn kin mek wit milk ɛn fresh prɔtin. I de gi fayn klia klia bɔt dɛn nɔ kin pik am fɔ kɔmɔn ɔvin ɔt.

Fɔ wan plein APET flɛnch, di opshɔn dɛn we dɛn kin lɛk na jɔs:

• BOPET we dɛn kɔt wit ɔt-sil

• Mono-PET lidding film wit wan PET-kompatibl sil kotin

• High-barrier PET laminate wit wan PET-kɔmpatibl silan

• Yunivasal izi-pil film we dɛn spɛshal tɛst agens APET

Wan gud APET lidding film fɔ divɛlɔp inof sil trɛnk fɔ handel ɛn distribyushɔn we nɔ nid fɔ gɛt pasmak ɔt we de distɔrj di flɛnch.

Risaykul kɔntinyu, pigmɛnt, anti-blɔk aditiv ɛn tre-manufakchurin kɔndishɔn kin chenj di siling winda. So wan rPET trey fɔ kwalifay as aktual trey gred pas fɔ tek am se i de biev jɔs lɛk vajin APET.

Fɔ chill prodakt, tink bɔt fɔ kɔba PET kɔmpatibiliti wit:

• Kol anti-fog pefomans

• Ay klia wan

• Kontrol izi peel

• MAP barɛri fɔ di tin dɛn we de apin

• Laser ɔ mɛkanikal pɔrfɔreshɔn

• Rivas printin we dɛn kin print

• Lɔw-tɛmpracha impak rɛsistɛns

Wetin Mek PET/PE Trey Dɛn kin Nid PE-Sil Liding Film

PET/PE trey na multilayer strɔkchɔ dɛn. PET de kɔntribyut stiffness ɛn apinans, we PE kin gi siling pefɔmɛns ɛn mɔstɔ rɛsistɛns. If PE de na di flɛnch, di lid fɔ sial to PE—pan ɔl we dɛn kin sɛl di trey as PET trey.

Di tin dɛn we dɛn kin pik fɔ du na:

• BOPET/PE fɔ jenɛral chill aplikeshɔn dɛn

• PET/EVOH/PE fכ hכy כksijεn-barεri rikwaymεnt

• Print PET laminated to wan PE silant we yu kin pul

• PE-kompatibl yunivasal lidding film

Dis na wan pan di tin dɛn we kin mek pipul dɛn nɔ ebul fɔ bay tin dɛn. Wan PET-kɔmpatibl kɔtin we dɛn mek fɔ plein APET nɔ kin bond rili to wan PE siling sɔfays. Konvεshכnal, wan PE-sil film nכ fכ asum fכ sial dairekt to εvri CPET כ APET flenj we nכ kכt.

We yu de aks fɔ lidding film fɔ PET trey pak, ɔltɛm tɔk if di trey na:

• Mono APET ɔ rPET

• CPET we dɛn kɔl CPET

• PET/PE

• PET/EVOH/PE

• PET wit wan prɔpriet silin skin

Us Lidding Film De Wok wit PP Trey?

PP trey dεm nכmal wan nid PP-kכmpatibl silan lεk CPP, wan modifyed PP blεnd כ wan prכpriet yunivεsal kכtin we validet εgεst PP.

Di kɔmɔn strɔkchɔ dɛn na:

• BOPET/CPP we de na di wɔl

• PET/PP we dɛn kɔl PET/PP

• PET/EVOH/PP, ɛn ɔda pipul dɛn

• BOPP ɔ coextruded PP-based lidding film

• Universal peelable film kwalifay fɔ PP

PP na tin we dɛn kin yuz bɔku bɔku wan fɔ it kol, deli it, maykrowev prodak ɛn ɔt-fil aplikeshɔn. Bɔt, standad maykrowev suitability nɔ min se di paket na retortable ɔ kɔnvɛnshɔnal-ɔvin sef.

Wan retort pakej nid fɔ gɛt film, silan, adeziv ɛn printin sistem we dɛn mek fɔ bia wit di kɔmplit prɛshɔn-ɛn-tɛmpracha saykl. Dɛn fɔ ebul fɔ no di trɛnk we di sil gɛt bifo ɛn afta dɛn dɔn prosɛs am.

Izi Pil, Hɛt-Rilis ɛn Lɔk Sil Ɛksplen

Di wɔd 'peelable' de diskraib di kɔshɔma ɛkspiriɛns, bɔt difrɛn sil mɛkanism dɛn kin mek da ɛkspiriɛns de.

Unplanned laminate delamination nɔto akseptabl izi-pil mɛkanism. If di ɔda fim separet frɔm in silin, di paket kin lɛf matirial na di flɛnch, mek ink ɔ adeziv kɔmɔt na do, ɛn i kin mek di kɔstɔma dɛn gɛt ɛkspiriɛns we nɔ kɔrɛkt.

Siling Temperature Nɔto di sem wit di Oven Temperature

wan siling-jaw setpoint kin bi 180°C, bכt di siling intafεys de εkspos fכ כnli frakshכn pan wan sεkכnd εn i kin nεva rich di ful jaw tεmprachכ. Wan ɔvin saykl kin mek di wan ol paket wam fɔ sɔm minit.

Dis na difrɛn spɛsifikɛshɔn dɛn:

• Sil initiashɔn tɛmpracha: Na di say we wan bond we dɛn kin mɛzhɔ kin bigin fɔ fɔm.

• Opareshɔn winda: Na di kɔmbaynshɔn fɔ di tɛmpracha, di tɛm we dɛn de de ɛn di prɛshɔn we de prodyuz akseptabl sil dɛn.

• Hot tak: Na di ebul we di fresh sil ebul fɔ mek i nɔ opin bifo i kol.

• Savis tɛmpracha: Di tɛmpracha we dɛn kin mit we dɛn de ful-ɔp, stɔrɔj, ri-ɔt ɔ kuk.

• Maksimal tɛmal saykl: Di kwalifay tɛmpracha ɛn di tɛm fɔ di kɔmplit paket.

Film tiknes, tul kotin, layn spid, trey temperechur en hεt transfכm tru di wεb כl infכlכw di rilayshכn bitwin jaw tεmprachכ εn intafeys tεmprachכ.

Fɔ dis rizin, fɔ kɔpi tɛmpracha sɛtin frɔm ɔda prodakshɔn layn nɔ rili fayn—ivin we ɔl tu di layn dɛn de yuz tre ɛn fim dɛn we fiba dɛn nem.

Aw fɔ Establish wan Windo we Dɛn kin abop pan fɔ Sial

Wan prodakshɔn sɛtin fɔ bi bays pan wan kɔntrol layn trayal pas wan saksesful pakej.

1. Kɔnfɔm di matirial intafɛs

Obtain di trey strɔkchɔ ɛn aydentify di polima ɔ kɔtin we de ɛksplɔz pan di flɛnch. If di dɔkyumentri nɔ kɔmplit, sɛn fizik trey dɛn to di fim kɔnvɔta fɔ mek dɛn tɛst di kɔmpitibliti.

2. Yuz di kɔndishɔn dɛn we di spɔlayt dɔn rɛkɔmɛnd fɔ bigin

Rɛkɔd:

• Jaw ɔ platen tɛmpracha

• Dwɛl tɛm

• Prɛshɔn fɔ sial

• Di wayd we di sil gɛt

• Tul ɛn trey tɛmpracha

• Layn spid

• Oriɛnteshɔn fɔ fim

• Prodakt filin temperechur

3. Test sɔm paramita kɔmbaynshɔn dɛn

Krio lɔw, midul ɛn ay sɛtin dɛn rawnd di rɛnj we dɛn rɛkɔmɛnd. Chenj wan vayriɔbul wan tɛm ɔ yuz wan dɔkyumɛnt dizayn fɔ ɛkspiriɛns dɛn.

Di abit na fɔ fɛn wan stebul opareshɔn winda—nɔto jɔs di ays we pɔsibul fɔ pul di pawa.

4. Evaluate trɛnk ɛn integriti sɛpret wan

Sil trɛnk ɛn lik rɛsistɛns gɛt fɔ du wit bɔt nɔto di sem mɛzhɔmɛnt. Strɔng sil kin stil gɛt chanɛl, we klin hεmɛtik sil nɔ kin nid maksimal fɔs fɔ opin ɔltɛm.

Yusful we dɛn fɔ kwalifay na:

• Sil-strɛng tɛst we dɛn bayz pan ASTM F88/F88M

• Laboratori hεt-sil evalueshɔn bays pan ASTM F2029

• Visual sil inspekshɔn

• Day penetreshɔn we fit fɔ pak we nɔ gɛt porous

• Bɔbul, vaykum ɔ prɛshɔn-bɛs lik tɛst

• Bɔst ɔ krip tɛst usay i fayn

• MAP edspɛs ɛn gas-ritɛnshɔn tɛst

• Distribushɔn, vaybreshɔn ɛn drɔp tɛst

5. Ripit tɛst afta di rial tɛmal saykl

Evaluate di pak afta in rial kɔndishɔn, inklud:

• Fɔ ful-ɔp wit ɔt

• Fɔ kip tin dɛn we dɛn dɔn kol

• Friz ɛn thaw

• Maykrowev rihit

• Kɔnvɛnshɔnal-ɔvin kuk

• Ritort prɔsesin we dɛn de du

• Intended shelf-layf tɛm

Pil fכs, brit, lik εn delamination kin chenj afta kכndishכn.

Barrier, Anti-Fog ɛn Ɔda Pɔfɔmɛnshɔn Opshɔn dɛn

Tray kompitibiliti na di fɔs tin we dɛn nid, bɔt nɔto in wangren.

Ɔksijɛn ɛn mɔstɔ barɛri

Fɔ MAP ɛn shelf-layf-sɛnsitiv it dɛn, spɛsifa di ɔksijɛn transmishɔn rit we dɛn kin mɛzhɔ ɛn wata-vaypa transmishɔn rit we dɛn nid. Rikɔd di tɛmpracha ɛn humiditi we dɛn de mɛzhɔ ɛni valyu.

EVOH kin gi ay oksijεn barεri, bכt in pεrformεns dipכnt pan strכkchכ εn envayroment kכndishכn. Shelf layf fɔ validet yuz di kɔmplit paket ɛn it prodak.

Anti-fog pefɔmɛns

Anti-fog tritmεnt de εp fכ kכndens mכsichכ fכ spre insay wan transparent layεr pas fכ fכm dכp dεm we yu kin si. Spɛsifiket:

• Hot ɔ kol anti-fɔg

• Fɔd ɛn filin tɛmpracha

• Di tɛmpracha we dɛn de kip di tin dɛn

• Di tɛm we yu fɔ du di tɛst

• Film sayd we de kɛr di tritmɛnt

• Akseptabl vijual rizulyt

Nɔ fɔ alaw anti-fɔg fɔ ridyus di sil trɛnk ɔ kɔntamin di flɛnch.

Print ɛn kɔd

Rivas printin de put di artwok insay di laminate, we de ɛp fɔ protɛkt am frɔm abrasion. Ink ɛn adeziv dɛn fɔ fayn fɔ di kɔnstrɔkshɔn we dɛn want fɔ kɔntakt wit it ɛn di tɛmral saykl.

Kɔnfɛm rol dairekshɔn, ay-mak pozishɔn, ripit lɔng, transparent winda ɛn deti-kɔd eria bifo prodakshɔn.

Ventin ɛn permeabiliti

Maykrowev it kin nid fɔ gɛt laser-skɔ vent, valv ɔ kɔntrol ɔt-rilis sil. Fresh prodakt kin nid makro- ɔ maykroperforeshɔn pas maksimal barɛri.

'High barrier' nɔ kin bɛtɛ ɔtomɛtik wan. di korekt gas transmishכn rεt dipכnt pan di it in respirashכn, shelf-layf tכgεt εn di pak atmosfεr.

Kɔmɔn Lidding Film Prɔblɛm ɛn Kɔrɛkt Akshɔn dɛn

Infɔmeshɔn fɔ Gi We yu Aks fɔ Lidding Film Quote

Wan kɔmplit spɛsifikɛshɔn de ridyus di tɛm fɔ sampul ɛn i de mek di fim we nɔ kɔmpitabl nɔ rich wan prodakshɔn trayal.

Gi dɛn tin ya:

1. Di wan we mek trey ɛn di kɔd fɔ di prɔdak

2. Komplit trey strɔkchɔ ɛn aktual flɛnch kɔntakt layt

3. Tray drawing, flange width ɛn nɔmba fɔ di kɔmpawtmɛnt dɛn

4. Tray-siling mashin brand ɛn mɔdel

5. Di film wit, tik, kor saiz ɛn maksimal rol dayamita we dɛn nid

6. Winding dairekshɔn ɛn print ripit lɔng

7. I izi fɔ pul, ɔt-rilis, risil ɔ lɔk-sil rikwaymɛnt

8. Target peel-fors rεnj, if i de

9. Fɔd tayp, fat, mɔstɔ, sos ɛn lɛk flɛnch kɔntaminɛshɔn

10. Filin temperechur ɛn layn spid

11. Chil, frɔzɛn, MAP, maykrowev, ɔvin ɔ retort kɔndishɔn

12. Rikwayd OTR, WVTR, anti-fɔg, pɔrfɔreshɔn ɛn printin pefɔmɛns

13. Di rigyuleshɔn dɛn we de fɔ it-kɔntakt ɛn di makit

14. Ekspekted anual volyum ɛn trial-rol rikwaymɛnt

Wan yusful rikwest fɔmat na:

Wi nid wan [wid ɛn tik] lid fim fɔ [tre kɔd ɛn strɔkchɔ]. Di flɛnch layt we de ɛksplɔz na [PET, PE ɔ PP]. Di paket nid [piɛl tayp], [kɔndishɔn fɔ stɔrɔj], [ɔt prɔses], [baria lɛvɛl] ɛn [printin rikwaymɛnt] pan [mashin mɔdel] trey sila.

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm

Wetin na di bɛst lidding film fɔ PET trey?

Fɔs disayd if di flɛnch prɛzɛnt PET ɔ PE. Plɛn APET jɔs nid PET-kɔmpatibl kɔtin, we PET/PE trey wit PE na di flɛnch nɔmal nid PE-kɔmpatibl silan.

Wan lidding film kin sial to CPET, APET ɛn PP trey?

Yɛs, dɛn mek sɔm yunivasal silin dɛn fɔ bɔku trey sɔfays dɛn. Bɔt, dɛn fɔ validet di kɔmpatibiliti, di peel fɔs ɛn di lik rɛsistɛns sɛpret wan pan ɛvri trey gred ɛn prodakshɔn layn.

Us fim fayn fɔ CPET trey?

Di usual statin point na wan ovenable BOPET ɔ PET film wit CPET/PET-kɔmpatibl ɔt-sil kɔtin. If di lid kɔntinyu fɔ tay we yu de ɔt, yuz fim we kwalifay fɔ di rayt tɛmpracha, di tɛm ɛn di we aw yu de pul di briz.

PET/PE lidding film kin sial dairekt to CPET?

Nɔto ɔtomɛtik wan. Wan PE siling layt nɔ kin bond rili to wan CPET flɛnch we nɔ gɛt kɔt pas i bi wan yunivasal ɔ spɛshal modifyed gred we dɛn tɛst fɔ da sɔfays de.

Us tɛmpracha dɛn fɔ yuz fɔ sial CPET trey dɛn?

bכku CPET sistεm dεm dεn kin evaluate fכs insay di 180–220°C jaw-setpoint rεnj, bכt di kכrekt sεtin dipכnt pan di film kכt, dεdwεl tεm, prεshכn, tul εn trey sεf. Di spɔlayt in tɛknikal data fɔ tek prayoritɛd.

Yu tink se ɛvri CPET lidding film ɔvin sef?

Nɔ. CPET trey kɔmpatibiliti ɛn ovenability na difrɛn rikwaymɛnt dɛn. Di kɔmplit film strɔkchɔ, adeziv, ink, kɔtin ɛn sial paket fɔ kwalifay fɔ di ɔvin saykl we dɛn want.

Wetin na di difrɛns bitwin APET ɛn CPET?

APET gɛt amorphous strɔkchɔ we de gi ay klia ɛn dɛn kin yuz am mɔ fɔ pak tin dɛn we dɛn dɔn kol. CPET na kristal fɔ mek i nɔ gɛt bɔku ɔt ɛn dɛn kin yuz am fɔ it rɛdi it dɛn we dɛn kin ɔvin.

Yu tink se wan sil we izi fɔ pul kin stil bi ɛmɛtik?

Yɛs. Wan izi-pil sistem we dɛn mek fayn fayn wan kin gi hɛmɛtik pakej intɛgriti we i de opin pan wan kɔntrol fɔs. Dɛn fɔ tɛst di sil intɛgriti ɛn di fɔs we i de opin sɛpret wan.

Yu tink se fim we gɛt ay barɛri de gi garanti fɔ di shelf layf we dɛn nid?

Nɔ. Shelf layf dipen pan di liding film, trey, sil eria, it, edspɛs gas, stɔrɔj ​​kɔndishɔn ɛn paket intɛgriti. Barɛri valyu dɛn nɔmɔ nɔ go ebul fɔ gi garanti fɔ di prɔdak layf.

Yu tink se mono-PET lidding film kin risaykul wit PET trey?

Wan mono-PET kɔmbayn kin mek di matirial kɔmpitishɔn bɛtɛ, bɔt risaykul stil dipen pan kɔtin, ink, adeziv, lɛbl, it rɛsɛdyu ɛn di kɔlɛkshɔn ɛn risaykul infrastukchɔ na di target makit.

Faynal Sɛlɛkshɔn Rul

Fɔ sial trey we pɔsin kin abop pan, yuz dis ɔda we aw yu fɔ disayd:

Identify di exposed flange material → mach di lidding seal layer → pik di peel behavior → difain baria ɛn thermal rikwaymɛnt → establish di siling winda → validet di kɔmplit pakej.

Nɔ ɛva gri fɔ mek fim jɔs bikɔs in prɔdak diskrɔpshɔn gɛt CPET, APET, PET/PE ɔ PP. Rikwest teknikol data, test di aktual trey en run prodakshon-spid trials bifo yu put ful-volyum oda.

Fɔ gɛt kɔrɛkt rɛkɛmɔndeshɔn, sɛn yu trey spɛsifikɛshɔn ɔ fizik sɛmpul dɛn togɛda wit di mashin mɔdel, di kayn it, di we aw dɛn de ɔt ɛn di we aw dɛn nid fɔ biev we dɛn de pul di pil.