Lidding Film bɛnkansɛbɛn min bɛ CPET , APET , PET/PE ani PP Trays kan

Lidding Film Compatibilité Matrix ka ɲɛsin CPET , APET , PET/PE ani PP Trays ma

Datugulan filimu ɲuman bɛ sugandi ni a ka funteni-sigilan bɛ bɛn fɛn ma min bɛ kɛnɛ kan tiriwari flansɛ kan—a tɛ kɛ dɔrɔn ni fɛn ye min tɔgɔ fɔra tiriwari ɲɛfɔli sɛbɛn kan.

O danfara in nafa ka bon kɛrɛnkɛrɛnnenya la ni aw bɛ lidding film sɔrɔ PET tiriwari baarakɛcogo la. APET tiriwari bɛ PET sigilan jira cogoya la, k’a sɔrɔ PET/PE tiriwari bɛ se ka PE jira flansɛ la. Hali ni sanubɔlanw fila bɛɛ kɔnɔ PET bɛ sɔrɔ, a ka c’a la, u mago bɛ datugulan-filimu suguya wɛrɛw la.

Nin ja in bɛ daminɛ nafamaw di filimu sugandili ni layini kɔrɔbɔliw kama.

* O funteni ninnu ye sɛgɛsɛgɛli yɔrɔw ye, u tɛ baarakɛcogo garanti ye. Filimu minnu bɛ daminɛ ni sigilan dɔgɔman ye ani minnu bɛ kɛ diɲɛ bɛɛ kɔnɔ, olu bɛ se ka baara kɛ o yɔrɔw kɔkan. Aw bɛ a daminɛ tuma bɛɛ ni filimu feerela ka fɛɛrɛbɔ kunnafoniw ye sɛbɛnfura min bɛ kɛ ani ka finɛtiri sɛgɛsɛgɛ masin yɛrɛ kan.

† Baarakɛyɔrɔ funteni bɛ a maracogo walima a sumaya kokura cogoyaw ɲɛfɔ. A ni sigilan-jaw funteni tɛ kelen ye. Foro, mikro, konfirɛzi walima retort fɔli bɛɛ ka kan ka ɲɛsin tiriwari –filimu–dumuni sira dafalen ma.

Mun na Sanu ka Flange Surface bɛ bɛnbaliya jira

A ka c’a la, finimugu dacogo bɛ kɛ ni fɛn caman ye minnu bɛ baara kɛ:

• Kɛnɛma PET walima BOPET layini dɔ fanga, jɛya, hakɛ sabatili ani sɛbɛnni kama

• EVOH, finimugu walima barikalan wɛrɛ min bɛ se ka kɛ

• A laminating adhesive walima tie layer

• Kɔnɔna funteni-sigi-yɔrɔ min bɛ ɲɔgɔn sɔrɔ tilennen na ni tiriwari flansɛ ye

• A bɛ se ka kɛ ko a bɛ se ka kɛ anti-fog, peel walima ventilation baarakɛcogo ye

Kɔnɔna funteni-sigi-yɔrɔ dɔrɔn de bɛ jɛɲɔgɔnya Kɛ ni tiriwari ye . A ka chimie ka kan ka bɛn polimɛri walima finimugu ma min bɛ bɔ kɛnɛ kan flansɛ kan.

O de y'a to filimu min ɲɛfɔlen don dɔrɔn ko ' PET lidding film' o tɛ bɛn a yɛrɛma PET -min kɔnɔ tiriwari . Kɛnɛma tabaga bɛ se ka kɛ PET ye, ka sɔrɔ sigilan bɛ se ka kɛ PE, PP walima diɲɛ bɛɛ ka finimugu ye min ye a yɛrɛ ta ye.

Sani aw ka komandi kɛ, aw bɛ a sɛmɛntiya:

1. tiriwari ka sigicogo dafalen, a tɛ a ka fɛnɲɛnɛma tɔgɔba dɔrɔn ye

2. Layɛrɛ jumɛn bɛ bɔ kɛnɛ kan sigilan flansɛ kan

3. Ni flansɛ bɛ ni finimugu ye, a fari bɛ datugu walima ni a kɛra fɛn ye min bɛ se ka kɛ fɛn wɛrɛ ye

4. Ni dadon wajibiyalen ye a sɔgɔli nɔgɔn ye, funteni bɔli walima a datugucogo

5. Foroko dafalen marali, a tilatilali ani a sumayacogo kura

Filimu jumɛn ka fisa ni CPET Dumunikɛyɔrɔ ye ?

Filimu min bɛ kɛ CPET tiriwari baarakɛcogo la, a ka c’a la, o ka kan ka baara kɛ ni PET walima BOPET tabaga ye min janya bɛ sabati ni CPET -compatible heat-seal coating ye. Ni foroko bɛna don foro kɔnɔ min bɛ kɛ tuma bɛɛ, ni a datugulan sirilen don, a yɔrɔ bɛɛ ka kan ka bɛn foro funteni ni waati kofɔlen ma.

O setigiya in kɔnɔ, filimu, funteni-sigi-datugulan, lamini-nɛgɛ, enki, sisi kɛlɛli furakɛli, tiriwari flange ani feerekɛlaw ka cikan sɛbɛnnenw bɛ yen.

CPET peel kɛcogo sugandi ka kɛɲɛ ni baarakɛcogo ye

• Nɛnɛ nɔgɔn ɲɛgɛn: A feerela bɛ a datugulan bɔ sani a ka sumaya. Sigilan ka kan ka to a la ni a tilali ye nɛnɛ walima nɛnɛ na nka a ka kan ka da saniyalen na a labɛnni waati.

• Funteni-bɔ-yɔrɔ: Filimu bɛ to ka datugu a maratuma na, wa a bɛ bɔ walima ka fiɲɛbɔyɔrɔw bɔ cogo la min bɛ kɔlɔsi ni dumuni bɛ sumaya.

• So funteni min bɛ bɔ kɔfɛ walima min bɛ bɔ fiɲɛbɔ la: A feerela bɛ fiɲɛbɔyɔrɔ dɔ bɔ a yɔrɔ dɔ la, ka a sɔgɔ walima ka a da wuli sani a ka a sumaya mikro walima foro la.

• Datugulan sigilan: Dadon banbali bɛ kɛ yɔrɔ min na lakana caman ka kan ka kɛ yɔrɔ min na ani da bɛ da wuli ni tigɛ walima tigɛ ye.

CPET sanubɔlanw bɛ se ka kɛ ni surface formulations wɛrɛw ye walima amorphous PET seal fari. O la, fila sanubɔlanw fila bɛɛ feerela i n’a fɔ CPET bɛ se ka sigilan fanga danfaralenw bɔ ni filimu kelen ye.

Aw kana foroko sɔrɔli jateminɛ ka bɔ PET kɛnɛma layini na

Laminati jenɛriki PET/PE tɛ se ka kɛ foronto kɔnɔ a yɛrɛma. Hali ni PET tabaga bɛ se ka funteni wulilen muɲu, PE sigilan, nɔrɔlan, sɛbɛnnikɛlan ani sisi kɛlɛli furakɛli bɛ se ka dan dɔgɔya.

Aw bɛ baara kɛ ni filimu hakɛ dɔrɔn de ye min sɛgɛsɛgɛra:

• A tigitigi CPET tiriwari

• Foro funteni hakɛ min ka bon kosɛbɛ

• So funteni waati

• Dumuni suguya ni a fasa girinya

• Ni a datugulan bɛ to ka nɔrɔ a la kosɛbɛ

• Fiɲɛbɔcogo walima a bɔlicogo ɲɛfɔli wajibiyalenw

Cogo min na ka Lidding Film sugandi APET ani r PET dumuni tabaliw kama.

APET ka teli ka kɛ dumuni nɛnɛmaw ye, sɛnɛfɛnw, burufefɛnw, salatiw, nɔnɔfɛnw ani farikolojɔli dumuni kuraw. A bɛ jɛya ɲuman di nka a ka c’a la, a tɛ sugandi ka kɛ tasuma ye min bɛ kɛ ni foro kɔrɔlen ye.

Ni APET flansɛ gansan ye, sugandili minnu ka fisa, olu ye caman ye:

• Funteni-sigi-da-dabɔlen BOPET

• Mono- PET datugulan filimu ni PET -baarakɛminɛnw datugulan ye

• Laminati min bɛ barika caman sɔrɔ PET ni PET -baarakɛminɛn ye min bɛ se ka kɛ

• Universel easy-peel film min sɛgɛsɛgɛra kɛrɛnkɛrɛnnenya la APET kan.

APET datugulan filimu ɲuman ka kan ka sigilan fanga caman sɔrɔ a minɛcogo ni a tilatilali la k’a sɔrɔ a ma funteni kojugu wajibiya min bɛ flansɛ tiɲɛ.

Fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, pigments, anti-block faralenw ani tiriwari -dilancogo bɛ se ka sigilan finɛtiri Changer. O la, r PET tiriwari ka kan ka jate tiriwari kalasi yɛrɛ ye sanni a ka miiri ko a bɛ a yɛrɛ minɛ i n'a fɔ npogotiginin tigitigi APET .

Ni fɛn nɛnɛmaw don, aw bɛ a lajɛ ka PET bɛnkan fara ɲɔgɔn kan ni:

• Nɛnɛ anti-fog baarakɛcogo

• Kɔrɔfɔliba

• Kɔrɔsili nɔgɔya peel

• MAP barikalan

• Laser walima masinw ka bɔgɔdaga

• Sɛbɛnni min bɛ kɛ kɔfɛ

• Funteni dɔgɔyalen bɔgɔbɔgɔli kunbɛnni

Mun na PET/PE Sariyasunw ka teli ka mago don PE-Seal Lidding Film la

PET/PE sanubɔlanw ye sigida caman ye. PET bɛ kɛ sababu ye ka gɛlɛya ni ɲɛda cogoya di, ka sɔrɔ PE bɛ se ka sigili baara kɛ ani ka ji kunbɛn. Ni PE bɛ bɔ kɛnɛ kan flansɛ kan, a datugulan ka kan ka siri PE la—hali ni tiriwari bɛ feere tuma caman na i n’a fɔ PET tiriwari .

Sugandili minnu bɛ kɛ cogoya la, olu ye:

• BO PET/PE ka ɲɛsin nɛnɛba baarakɛcogo bɛɛ ma

• PET/EVOH/PE walasa ka oksizɛni-barika hakɛ caman sɔrɔ

• A sɛbɛnnen PET lamininen ka kɛ PE sigilan ye min bɛ se ka bɔ

• PE-compatible universel lidding film

O ye sanni filiw sababu dɔ ye min ka teli ka kɛ. PET -baarakɛminɛn min bɛ bɛn APET gansan ma, o bɛ se ka kɛ ko a tɛ siri ni dannaya ye PE sigilan dɔ la. O kɔfɛ, PE-sigilan filimu man kan ka jate ko a bɛ siri k’a ɲɛsin CPET walima APET flansɛ bɛɛ ma min ma datugu.

Ni aw bɛ lidding film ɲini PET tiriwari pakew kama, aw k’a fɔ tuma bɛɛ ni tiriwari ye:

• Mono APET walima r PET

• CPET

• PET/PE

• PET/EVOH/PE

• PET ni farikolo sigicogo ye min ye a yɛrɛ ta ye

Lidding Film jumɛn bɛ baara kɛ ni PP Trays ye?

A ka c’a la, PP sanubɔlanw bɛ PP-compatible sealant de wajibiya i n’a fɔ CPP, PP ɲagaminen caman walima universel coating propriétaire min sɛgɛsɛgɛra PP kan.

Jateminɛ minnu bɛ Kɛ ɲɔgɔn fɛ olu ye:

• BOPET /CPP ye baara kɛ

• PET /PP., Bamako, Mali

• PET /EVOH/PP ye baara kɛ ni a ye

• BOPP walima coextrudé PP-based lidding film

• Film peelable universel min bɛ se ka kɛ PP ye

PP bɛ kɛ ka caya dumuni nɛnɛnenw na, deli dumuniw na, fɛnw na minnu bɛ se ka bila mikro la ani fɛnw na minnu bɛ kɛ ni funteni ye. Nka, ni mikro-onde bɛnnen don, o kɔrɔ tɛ ko a foroko bɛ se ka wuli walima ko a tɛ se ka kɛ foro kɔrɔ la.

Retort pake bɛ filimu, sigilan, nɔrɔlan ani sɛbɛnnikɛlan de wajibiya min dilannen don walasa ka degun ni funteni sɛgɛsɛgɛli dafalen muɲu. Sigiyɔrɔ fanga ka kan ka jateminɛ sani a ka baara kɛ ani a baara kɔfɛ.

Easy Peel, Heat-Release ani Lock Seal ɲɛfɔlen don

'peelable' daɲɛ bɛ musakabɔlaw ka ko kɛlen ɲɛfɔ, nka sigicogo wɛrɛw bɛ se ka o ko kɛlenw da.

Laminate delamination (lamini delamination) min ma labɛn, o tɛ fɛɛrɛ ye min bɛ sɔn ka a bɔ nɔgɔya la. Ni kɛnɛma filimu ni a sigilan farala ɲɔgɔn kan, foroko bɛ se ka fɛn to flansɛ kan, ka enki walima nɔrɔlan bɔ kɛnɛ kan, ka kɛ sababu ye ka mɔgɔw ka ko kɛlenw kɛ minnu tɛ bɛn ɲɔgɔn ma.

Dadon funteni ni foro funteni tɛ kelen ye

Sigiyɔrɔ-sigiyɔrɔ bɛ se ka kɛ 180°C ye, nka sigilan-yɔrɔ bɛ bɔ kɛnɛ kan seginkanni tilayɔrɔba dɔrɔn kɔnɔ, wa a bɛ se ka kɛ ko a tɛ se dawolo funteni dafalen ma abada. Foro sɛrɛkili dɔ bɛ foroko bɛɛ bila funteni na miniti damadɔ kɔnɔ.

Olu ye fɛn ɲɛfɔcogo danfaralenw ye:

• Sigili daminɛ funteni: Yɔrɔ min na jɛɲɔgɔnya sumanikɛlan bɛ daminɛ ka kɛ.

• Baarakɛyɔrɔ : Funteni, sigi waati ani degun faralen ɲɔgɔn kan min bɛ sigilanw bɔ minnu bɛ sɔn.

• Hot tack: Se min bɛ sigilan kura la ka da wuli sani a ka nɛnɛ.

• Baarakɛyɔrɔ funteni: Funteni min bɛ sɔrɔ fasa, a marali, a sumaya kokura walima a tobili waati.

• Sumaya hakɛ maksimali: Funteni ni a kuntaala hakɛ min bɛ se ka kɛ foroko dafalen na.

Filimu janya, baarakɛminɛnw datugucogo, layini teliya, tiriwari funteni ani funteni jiginni ɛntɛrinɛti fɛ, olu bɛɛ bɛ nɔ bila jɛɲɔgɔnya la jaw funteni ni ɲɔgɔndan funteni cɛ.

O de kama, ka funteni sigicogo dɔ kopi kɛ ka bɔ fɛn dilanni sira wɛrɛ la, o tɛ se ka da a kan—hali ni layini fila bɛɛ bɛ baara kɛ ni sanubɔlanw ni filimuw ye minnu bɛ ɲɔgɔn bɔ tɔgɔ la.

Cogo min na i bɛ se ka sigilan dɔ sigi sen kan min bɛ se ka da a kan

Sɛnɛfɛnw dilanni sigicogo ka kan ka sinsin layini kɔrɔbɔli kɔlɔsili kan sanni ka sinsin pake kelen kan min ye ɲɛtaa sɔrɔ.

1. Aw bɛ fɛnw kɛcogo ɲɛfɔ

Aw bɛ tiriwari sigicogo sɔrɔ ani ka polimɛri walima finimugu min jiralen don flansɛ kan, o dɔn. Ni sɛbɛnniw ma dafa, aw bɛ farikolo sanubɔlanw ci filimu jiginnikɛlan ma walasa ka bɛnkan sɛgɛsɛgɛli kɛ.

2. Aw bɛ baara kɛ ni furakɛlikɛla ka daminɛcogo fɔlenw ye

Ka kumakan ta:

• Jaw walima platen funteni

• Sigi waati

• Daɲɛw sigicogo degun

• Sigiyɔrɔ bonya

• Baarakɛminɛn ni tiriwari funteni

• Layini teliya

• Filimu ɲɛsincogo

• Fɛn dilannenw falenni funteni

3. Aw bɛ paramɛtiri caman faralen ɲɔgɔn kan kɔrɔbɔ

Aw bɛ sigida dɔgɔmanninw, cɛmancɛw ani sanfɛyɔrɔw dabɔ yɔrɔ ladililen lamini na. Yɛlɛma don fɛn caman sɛgɛsɛgɛli la a waati kelen na walima ka baara kɛ ni kɔrɔbɔliw labɛncogo sɛbɛnnen ye.

Laɲini ye ka baarakɛyɔrɔ finɛtiri sabatilen dɔ sɔrɔ—a tɛ kɛ dɔrɔn ko a bɛ se ka kɛ ko a ka fanga ka bon kosɛbɛ.

4. Aw bɛ fanga ni dafalenya jateminɛ u danma

Sigilan fanga ni jibɔbaliya bɛ tali kɛ ɲɔgɔn na nka u tɛ sumanikɛlan kelen ye. Siginiden barikama bɛ se ka kɛ ni kanal ye hali bi, k’a sɔrɔ sigilan hɛrɛmɛtiki saniyalen tɛ da wuli fanga camanba de wajibiya tuma bɛɛ.

Seko ni dɔnko fɛɛrɛ nafamaw ye ninnu ye:

• Sigiyɔrɔ-fanga sɛgɛsɛgɛli min sinsinnen bɛ ASTM F88/F88M kan

• Laboratowari ka funteni-sigicogo jateminɛ min sinsinnen bɛ ASTM F2029 kan

• Siginidenw sɛgɛsɛgɛli yelen

• Karamɔgɔ doncogo min bɛnnen don pakew ma minnu tɛ porose ye

• Bubble, vacuum walima degun-sɛgɛsɛgɛli min bɛ kɛ ni bɔgɔbɔli ye

• Burst walima creep testing yɔrɔ minnu na a bɛnnen don

• MAP kunkolo-yɔrɔ ni gazi-minɛ-sɛgɛsɛgɛli

• Jatebla, yɛrɛyɛrɛ ani jigincogo sɛgɛsɛgɛli

5. Aw bɛ segin sɛgɛsɛgɛli kan funteni sɛgɛsɛgɛli lakika kɔfɛ

Aw bɛ pake jateminɛ a cogoya lakikaw kɔfɛ, i n’a fɔ:

• Fali funteniman

• Fɛn min bɛ mara nɛnɛ na

• Nɛnɛ ni nɛnɛ bɔli

• Micro-ondes (Micro-ondes) ka sumaya kokura

• Tobili kɛcogo kɔrɔlen-foro kɔnɔ

• Retort baarakɛcogo

• Laɲini waati min bɛ kɛ ka fɛnw mara

Peel force, brittleness, leakage ani delamination bɛ se ka Changé conditionnement kɔfɛ.

Barrière, Anti-Fog ani Performance Sugandili wɛrɛw

Sani bɛnkan ye wajibi fɔlɔ ye, nka o dɔrɔn tɛ.

Oksizɛni ni jisuma barikalan

Ni MAP ani dumuni minnu bɛ se ka to u marali la, aw bɛ oksizɛni sɔrɔcogo sumanikɛlan ni ji-la-taama hakɛ wajibiyalenw fɔ. Nafa kelen-kelen bɛɛ bɛ suman funteni ni nɛnɛ hakɛ min na, o sɛbɛn.

EVOH bɛ se ka oksizɛni balilan caman di, nka a baarakɛcogo bɛ bɔ a jɔcogo n’a sigida cogoyaw la. A maracogo ka kan ka sɛgɛsɛgɛ ni a foroko dafalen ni dumunifɛn ye.

Anti-fog baarakɛcogo

Furakɛli min bɛ kɛ ni sisi ye, o bɛ jisuma wulilenw dɛmɛ ka jɛnsɛn ka kɛ fɛn ye min bɛ ye sanni ka kɛ jikuru yetaw ye. A ɲɛfɔ:

• Funteni kɛlɛli funteni walima nɛnɛ

• Dumuni ni fasa funteni

• A maracogo funteni

• Kɔrɔbɔli kuntaala

• Filimu fan min bɛ furakɛli ta

• Jateminɛ yelen min bɛ sɔn

Anti-fog man kan ka to ka dɔ bɔ sigilan fanga la walima ka flansɛ nɔgɔ.

Sɛbɛnni ni kodɔnni

Reverse printing bɛ ja dilancogo bila lamini kɔnɔ, o bɛ dɛmɛ don k’a tanga sɔgɔsɔgɔninjɛ ma. Enkiw ni nɛgɛw ka kan ka bɛn dumuni ni ɲɔgɔn cɛ jɔli ni funteni sɛgɛsɛgɛli laɲininen ma.

Aw bɛ rollo sira, ɲɛ taamasiyɛn jɔyɔrɔ, segin janya, finɛtiri jɛlenw ani don-kode yɔrɔw dafa sani a ka dilan.

Fɛnɲɛnɛma bɔli ni doncogo

Mikɔrɔ-onde dumuniw bɛ se ka kɛ ni laser-scored ventilateur, valve walima controlled heat-release seal ye. Sɛnɛfɛn kuraw bɛ se ka mago don makɔrɔ- walima mikro-perforation (makɔrɔ- walima mikro-perforation) la sanni ka kɛ ni maksimali barika ye.

'Barikɛ sanfɛ' tɛ fisaya a yɛrɛma. Gazi tali hakɛ bɛnnen bɛ bɔ dumuni ninakili la, a maracogo laɲini ani a foroko kɔnɔ.

Lidding Film Gɛlɛya minnu bɛ sɔrɔ tuma caman na ani a latilenni walew

Kunnafoni minnu ka kan ka di ni i bɛ Lidding Film Quote ɲini

Sɛbɛnni dafalen bɛ dɔ bɔ misali ta waati la ani ka filimu min tɛ bɛn ɲɔgɔn ma, o bali ka se a dilanni kɔrɔbɔli la.

Aw ye nin kunnafoniw di:

1. Sani dilanbaga ani a ka fɛn dilannenw ka kode

2. tiriwari sigicogo dafalen ani flange contact layɛrɛ yɛrɛ

3. Sani ja, flange bonya ani a yɔrɔw hakɛ

4. Tray-sealing machine taamasiyɛn ni a modɛli

5. Filimu bonya wajibiyalen, a bonya, a kɔnɔna hakɛ ani a kurukuru cɛmancɛ hakɛ min ka bon

6. Winding direction ani sɛbɛnni seginni janya

7. A ka kan ka kɛ ko a ɲɛ ka nɔgɔn, ka funteni bɔ, ka a datugu kokura walima ka a datugu

8. Laɲini peel-force range, ni a bɛ sɔrɔ

9. Dumuni suguya, tulu, ji, mɔni ani a bɛ se ka kɛ flansɛ nɔgɔli ye

10. Fali funteni ni layini teliya

11. Nɛnɛ, nɛnɛ, MAP , mikro, foro walima retort cogoyaw

12. OTR, WVTR, anti-fog, perforation ani sɛbɛnni baarakɛcogo wajibiyalenw

13. Dumuniko ni sugu sariyaw minnu bɛ sirataama

14. San hakɛ makɔnɔnen ani kɔrɔbɔli-sɛbɛn wajibiyalen

Delili kɛcogo nafama dɔ ye:

An mago bɛ [bonya ni a bonya] datugulan filimu na [ tiriwari kode ni sigicogo] kama. Flansɛ layini min bɛ kɛnɛ kan, o ye [ PET , PE walima PP]. Foroko in bɛ [peel type], [storage conditions], [heating process], [barrier level] ani [printing requirements] de wajibiya [masin modɛli] tiriwari sigilan kan.

Ɲininkali minnu bɛ kɛ tuma caman na

Datugulan filimu ɲuman ye mun ye PET tiriwari ?

Fɔlɔ k’a dɔn ni flansɛ bɛ PET walima PE jira. APET gansan mago bɛ PET -baarakɛminɛn na min bɛ bɛn, k’a sɔrɔ PET/PE sanubɔlanw ni PE bɛ flansɛ kan, a ka c’a la, a mago bɛ PE-baarakɛminɛn na.

Yala filimu datugulen kelen bɛ se ka sigi CPET , APET ani PP sanubɔlanw la wa ?

Ɔwɔ, diɲɛ bɛɛ ka sigilan dɔw dabɔra tiriwari yɔrɔ caman kama. Nka, bɛnkan, peel force ani leak resistance ka kan ka sɛgɛsɛgɛ danfara la tiriwari grade bɛɛ kan ani production line bɛɛ kan.

Filimu jumɛn bɛnnen don CPET tiriwari ma ?

A daminɛyɔrɔ min bɛ kɛ tuma bɛɛ, o ye filimu ye min bɛ se ka kɛ foro kɔnɔ BOPET walima PET ni C PET/PE T-compatible heat-seal coating ye. Ni datugulan tora ka nɔrɔ funteni waati, aw bɛ filimu kɛ min bɛ se ka kɛ funteni, waati ani fiɲɛbɔcogo tigitigi ye.

Yala PET/PE lidding film bɛ se ka sigi ka ɲɛsin CPET ma wa ?

A tɛ kɛ a yɛrɛma. PE sigilan bɛ se ka siri ni dannaya ye CPET flansɛ la min ma datugu fo ni a kɛra diɲɛ bɛɛ ta ye walima ni a kɛra fɛn kɛrɛnkɛrɛnnen ye min sɛgɛsɛgɛra o yɔrɔ la.

Funteni jumɛn ka kan ka kɛ ka CPET sanubɔlanw datugu ?

CPET sigida caman bɛ jateminɛ fɔlɔ la 180–220°C jaw-setpoint range kɔnɔ, nka sigicogo ɲuman bɛ bɔ filimu dacogo la, sigi waati, degun, baarakɛminɛn ani tiriwari yɔrɔ la. Fɛn dilanbaga ka fɛɛrɛbɔ kunnafoniw ka kan ka bila jɔyɔrɔ fɔlɔ la.

Yala CPET lidding film foro bɛɛ lakananen don wa?

Ayi CPET tiriwari bɛnkan ni foroko ye wajibiw ye minnu tɛ kelen ye. Filimu jɔcogo dafalen, nɔrɔlan, enki, finimugu ani a foroko sirilen ka kan ka se ka kɛ foroko sɛgɛsɛgɛli laɲininen ye.

Danfara jumɛn bɛ APET ni CPET cɛ ?

APET bɛ ni jɔcogo ye min tɛ fɛn ye min bɛ jɛya kosɛbɛ, wa a bɛ kɛ kosɛbɛ foroko nɛnɛlenw na. CPET bɛ kɛ kristali ye walasa ka funteni kunbɛn kosɛbɛ wa a bɛ kɛ ka caya dumuni labɛnnenw na minnu bɛ se ka kɛ foro kɔnɔ.

Yala sigilan min bɛ bɔ nɔgɔya la, o bɛ se ka kɛ hɛrɛmɛtiki ye hali bi wa?

Awɔ. Sisitɛmu min dilannen don ka ɲɛ, min bɛ se ka sɔgɔsɔgɔ nɔgɔya la, o bɛ se ka pake hermetic integrity di ka a sɔrɔ a bɛ da wuli fanga kɔrɔsilen na. Sigiyɔrɔ dafalen ni da wuli fanga ka kan ka sɛgɛsɛgɛ u danma.

Yala filimu min bɛ barika caman sɔrɔ, o bɛ a to a ka waati hakɛ wajibiyalen na wa?

Ayi, a marali waati bɛ bɔ finimugu dacogo la, tiriwari , sigilan yɔrɔ, dumuni, kunkolo gazi, a maracogo ani a foroko dafalen. Barika nafaw dɔrɔn tɛ se ka fɛn dilannenw ka ɲɛnamaya garanti.

Yala mono- PET lidding film bɛ se ka segin ka kɛ ni PET tiriwari ye wa ?

Mono- PET faralen ɲɔgɔn kan, o bɛ se ka fɛnw bɛn ɲɔgɔn ma, nka fɛnw lasegincogo bɛ bɔ hali bi finiw, tintinw, nɛgɛw, taamasiyɛnw, dumuni tolenw ani fɛnw lajɛli ni u lasegincogo fɛɛrɛw la sugu laɲininen kɔnɔ.

Sugandili laban sariya

Walasa ka tiriwari sigicogo dafalen sɔrɔ, aw bɛ nin latigɛw sigicogo in kɛ:

Flansɛ fɛn min bɛ kɛnɛ kan, o dɔn → ka bɛn ni datugulan sigilan ye → ka ɲɛgɛn kɛcogo sugandi → ka barika ni funteni wajibiyalenw ɲɛfɔ → ka sigilan finɛtiri sigi → ka pake dafalen tiɲɛ.

Aw kana sɔn filimu ma abada dɔrɔn bawo a ka fɛn dilannenw ɲɛfɔli bɛ CPET , APET , PET/PE walima PP. Fɛɛrɛ kunnafoniw ɲini, ka tiriwari yɛrɛ kɔrɔbɔ ani ka sɛnɛ teliya kɔrɔbɔliw kɛ ka sɔrɔ ka komandi dafalen kɛ.

Walasa ka laadilikan tigitigi sɔrɔ, aw bɛ aw ka tiriwari ɲɛfɔli walima farikolo taasibila ci ka fara masin modɛli kan, dumuni suguya, funteni kɛcogo ani ɲɛgɛn kɛcogo wajibiyalenw.