HSQY 0.5mm 1mm 2mm Wait PP Plastik Polipropilen Sheet

Wetin Na Wait PP Plastik Shit?

Wan wayt PP plastic sheet na wan opaque polypropylene sheet we dɛn kin yuz fɔ pak, print, fold bɔks, steshɔnari, thermoforming, sayn, tɛmplat, protɛktiv insɛt ɛn industrial fabrication. I de kɔba lɔw matirial wet, prɛktikal fleksibiliti, mɔstɔ rɛsistɛns, kemikal rɛsistɛns ɛn ripit-fold pefɔmɛns.

HSQY de saplae wayt polypropylene sheet in tiknes we dɛn kin aks fɔ we na 0.5 mm, 1 mm ɛn 2 mm, wit wan brayt tiknes we dɛn kin kɔstɔmayz frɔm 0.25 mm to 5 mm. Standart 1220 × 2440 mm ɛn 915 × 1830 mm sheet dɛn de, togɛda wit kɔstɔm-kat dimɛnshɔn dɛn.

Di wayt opaque surface de gi klin bakgrɔn fɔ print, lɛbl, sayn, pak ɛn dɛkɔretiv prɔdak. Dɛn kin mek klia, blak ɛn kɔstɔm kɔlɔ dɛn bak wit mat, frɔst, twil, bark, ɔrɛnj-pil, fayn-tɛkstɔr ɔ kɔs-tɛkstɔr finish.

Kastom fɔmyulashɔn dɛn kin inklud antistatik, kɔnduktiv, flaym-rɛtardant ɔ ɔda prɔjɛkt-spɛsifi k prɔpati dɛn. Dɛn pefɔmɛns lɛvɛl ya nɔto standad na ɛvri PP shit ɛn dɛn fɔ kɔnfyus dɛn akɔdin to di tɛst we dɛn nid, aplikeshɔn ɛn di dɛstineshɔn makɛt.

Rikwest Wait PP Shit Prayz    Rikwest wan PP Shit Sampul

Wait Polipropilɛn Sheet Vidio

Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY wayt polypropylene sheet surfaces, di spesifikeshɔn dɛn we de ɛn di tipik kɔnvɔtin aplikeshɔn dɛn.

Wait PP Plastik Sheet Spesifikasi

Faynal tiknɛs tolɛreshɔn, dimɛnshɔn, kɔlɔ, sɔfayz tɛkstɔr, rigiditi ɛn fɛnshɔnal pefɔmɛns fɔ kɔnfɔm tru wan aprɔv sampul, tɛnki spɛsifikɛshɔn ɔ bay kɔntrakt.

Difrɛns Bitwin 0.5 mm, 1 mm ɛn 2 mm PP Shit

Fɔ pik di kɔrɛkt polypropylene sheet tiknes dipen pan di fleksibiliti we yu nid, stiffness, finished-product dimɛnshɔn, lod, folding strɔkchɔ, fɔm dip ɛn prɔsesin ikwipmɛnt.

Dis na jenɛral sɛlɛkshɔn gaydlayn pas fiks injinɛri lɔ dɛn. Rɛsin gred, aditiv, sɔfayz strɔkchɔ, prodakshɔn dairekshɔn, savis tɛmpracha ɛn finish-prɔdakt dizayn kin rili afɛkt pefɔmɛns.

Ki Bɛnifit dɛn fɔ Wait Polipropilɛn Shit dɛn

Matirial we Layt Wet

Polipropilɛn gɛt rili lɔw matirial dɛnsiti, we kin ridyus di finish-prɔdak wet, shiping wet ɛn hanlin rikwaymɛnt kɔmpia wit ebi plastic shit matirial.

Kεmikכl Resistεns

PP de gi rεsistεns to plεnti asid, alkali, ditarjen εn kεmikכl dεm we dεn kin mit. Kɔmpatibiliti fɔ stil tɛst agens di aktual kemikal, kɔnsɛntreshɔn, tɛmpracha ɛn ɛksplɔshɔn tɛm.

Lɔw Mɔstɔ Absɔpshɔn

Polipropilɛn nɔ kin tek wata wantɛm wantɛm, we kin mek i fayn fɔ fɔlda, pak, sayn, layna ɛn tin dɛn we dɛn mek we dɛn kin yuz na say dɛn we gɛt bɔku bɔku wata ɔ we dɛn kin klin bɔku tɛm.

Livin-Hing ɛn Ripit-Fold Pɔfɔmɛnshɔn

Dɛn kin skor di rayt tin PP shit gred dɛn ɛn fold dɛn bɔku bɔku tɛm fɔ mek liv hinj fɔ fɔlda, bɔks, kes ɛn pak we dɛn kin yuz bak. Hinge dairekshɔn, tiknɛs, skɔring jɔyometri ɛn prɔsesin kɔndishɔn dɛn nid fɔ validet.

Impekt ɛn Fatigue Resistance

PP de gi yusful rεsistεns to ripit flekshכn εn nכmal hεndlin strεs. Aktual impak bihayvya dipכnt pan if dεn sεlekt wan homopolimכr, kכpolimכr כ modifyed fכmyuleshכn.

Hɛt-Wɛldin Kapabiliti

Polipropylene komponent dɛn kin jɔyn yuz kɔmpitabl ɔt-ɛya, ɛkstrushɔn, ɔltrasɔnik ɔ ɔda tɛmal-wɛldin we dɛn de yuz. Welding temperechur ɛn ikwipmɛnt sɛtin fɔ ajɔst to di PP gred ɛn tiknes we yu dɔn pik.

Kastom Kɔlɔ ɛn Surface Tɛkstɔr

Yu kin jɔyn wayt, blak, klia ɛn kɔstɔm kɔlɔ dɛn wit smol, mat, frɔst, twil, bark, ɔrɛnj-pil ɛn ɔda ɛmbos sɔfays finish.

Fɔmulashɔn dɛn we de wok

Antistatik, kɔnduktiv ɛn flaym-ritardant fɔmyulashɔn dɛn kin divɛlɔp fɔ di prɔjek-spɛsifi k rikwaymɛnt dɛn. Fɔnshɔnal aditiv kin afɛkt kɔlɔ, fleksibiliti, impak trɛnk, kemikal rɛsistɛns ɔ fabrikeshɔn bihayvya ɛn dɛn fɔ evalyu am as kɔmplit matirial sistɛm.

PP Sheet Surface ɛn Fɔnkshɔn Opshɔn dɛn

Fכnshכnal diskripshכn dεm lεk antistatik, kכnduktiv כ fכm-rεtardant nכ kכmplit if dεn nכ gεt tεst standad. Di wan dɛn we de bay fɔ gi di resistans rɛnj we dɛn nid, di flaym raytin, di we aw dɛn de tɛst, di tik ɛn di kɔndishɔn dɛn we de na di envayrɔmɛnt.

Printin pan Wayt Polipropilɛn Shit

Polipropilεn gεt rili lכw sכfayz εnεji, so PP we dεn nכ trit kin gi limited adheshon fכ ink, kכt, lεbul εn adhesive. Korona tritmɛnt, flaym tritmɛnt, plasma tritmɛnt, prayma ɔ kɔmpitabl ink sistɛm kin nid.

Fɔ Print na Skrin

Yu kin yuz skrin printin fɔ logo, tɛks, sɔlid kɔlɔ ɛn wɔnin grafik. Ink fɔ fɔmulayt fɔ PP ɔ yuz am wit wan aprɔpriet sɔfayz tritmɛnt ɛn prayma.

UV ɛn Dijital Printin

UV ɛn dijital printin nid fɔ validet sɔfays ɛnaji, ink wet, kɔring ɛnaji, adheshon ɛn skrach rɛsistɛns. Dɛn fɔ tɛst di printin afta di sem tɛm we dɛn de kip am we dɛn de du kɔmɛshɔnal prodakshɔn.

Ɔfset Printin we yu de print

Dɛn kin yuz ɔfset printin pan di rayt PP sheet dɛn we dɛn dɔn trit. Shit fidin, statik kɔntrol, ink drying, adheshon ɛn post-print folding pefɔmɛns fɔ evalyu.

Printing Tritmɛnt we pɔsin de ol

Surface-treatment effectiveness kin dכn we dεn de stכr am. Di wan dɛn we de bay fɔ tɔk bɔt di dayn lɛvɛl we dɛn nid, di de we dɛn print ɛn di kɔndishɔn we dɛn fɔ kip am, dɔn dɛn fɔ chɛk di sɔfayz ɛnaji bifo dɛn print di prodakshɔn.

Prosesin ɛn Fabrikɛshɔn fɔ PP Plastik Shit dɛn

Kɔt ɛn Rout

PP sheet kin kכt naif, rout, panch כ mεkanikal kכt. Tul kondishɔn, kɔt spid, matirial tɛmpracha ɛn shit tiknɛs afɛkt edj kwaliti ɛn dimɛnshɔnal akkuracy.

Day-Kɔt fɔ Day

Tin ɛn midul-gej PP sheet dɛn kin day kɔt insay pak insɛt, tag, divayda, tɛmplat ɛn bɔks profayl. Kɔt prɛshɔn ɛn day kliarens fɔ mach di tik we di shit tik.

Kris ɛn Fɔl

Yu kin yuz kol ɔ ɔt kris fɔ fɔlda, bɔks ɛn living hinj. Skɔ dip, hinj wit, matirial dairekshɔn ɛn bɛnd rayus de afɛkt waytin, spring-bak ɛn taya layf.

Welding we dɛn kin du

Hot-air welding, extrusion welding ɛn ultrasonic joining kin yuz fɔ kɔmpitabl PP kɔmpɔnɛnt dɛn. Di we aw dɛn pik dipen pan di tik we di shit tik, di jɔyn dizayn, di prodakshɔn volyum ɛn di trɛnk we dɛn nid.

Adhesive Bonding we gɛt fɔ du wit am

Kɔnvɛnshɔnal adeziv dɛn kin bon fayn to PP we dɛn nɔ trit. Sɔfayz aktiveshɔn ɛn wan adeziv we dɛn mek spɛshal fɔ plastic dɛn we nɔ gɛt bɔku sɔfays ɛnaji kin nid.

Tɛmofɔmin we dɛn de mek

Suitabl PP gred kin bi vaykum fכm כ prεshכn fכm insay trey, kכva, kכntena εn shep pat dεm. Shit itin, mold dizayn, shrinkage, draw ratio, kul ɛn wɔl-tiknes distribyushɔn nid prodakshɔn trayal.

Aw fɔ Disain wan Livin Hinge na PP Sheet

Bɔku tɛm dɛn kin pik polipropilɛn fɔ fɔlda, kes ɛn bɔks dɛn we dɛn kin yuz bak bikɔs wan tin hinj sɛkshɔn kin bia we dɛn de bɛn am bak. Rilibul hinj pefɔmɛns dipen pan matirial gred ɛn pat dizayn.

• Yuz wan PP gred we dɛn pik fɔ ripit fleks pas fɔ tek am se ɛvri PP sheet gɛt di sem hinj pefɔmɛns.

• Kɔnfɔm di shit prodakshɔn dairekshɔn ɛn ɔriɛnt di hinj akɔdin to di kɔnfigyushɔn we dɛn dɔn tɛst.

• Nɔ kɔt kɔmplit wan tru di hinj eria.

• Yuz wan kɔnsistɛns kris wit ɛn dip akɔdin to di kɔmplit hinj.

• Nɔ gɛt shap notch ɔ kɔna dɛn we go mek yu strɛs.

• Test di nכmba we yu nid fכ opin εn klos saykl dεm כnda aktual tεmprachכ kכndishכn dεm.

Aplikeshɔn fɔ Wait PP Plastik Shit dɛn

Dɛn kin yuz wayt polipropilɛn sheet dɛn akɔdin to pak, printin, klos, fut, steshɔnari, advatayzmɛnt, dɛkɔreshɔn ɛn industrial fabrikeshɔn.

Di we aw dɛn de pak di tin dɛn

Di aplikeshɔn dɛn na bɔks dɛn we dɛn kin fold, bɔks dɛn we dɛn kin yuz bak, bɔks dɛn we dɛn kin yuz fɔ ple tɔys, bɔks dɛn fɔ shuz, tin dɛn fɔ pak gift dɛn, tin dɛn we dɛn kin put insay, tin dɛn we dɛn kin yuz fɔ sheb dɛn, tin dɛn we dɛn kin yuz fɔ protɛkt dɛn, bak sheet dɛn we kin protɛkt dɛn ɛn sliv dɛn fɔ pak tin dɛn.

Pakɛj we dɛn mek wit Tɛmofɔm

Dɛn kin fɔm fayn gred dɛn to trey, kɔva, kɔntena, layna ɛn kɔstɔm-shep pak kɔmpɔnɛnt dɛn.

Apparel ɛn Futwɔd

Yu kin yuz wayt PP sheet fɔ klos tɛmplat, shuz patɛn bod, skrib shit, tag ɛn riinfɔsmɛnt kɔmpɔnɛnt dɛn.

Steshɔnari tin dɛn

Fayl fɔlda, dɔkyumɛnt walet, notbuk kɔva, tab divayda, maws pad, kalenda bays ɛn dɔkyumɛnt kes dɛn we yu kin yuz bak kin kɔmɔt frɔm PP shit.

Sayn dɛn ɛn Displei dɛn

Yu kin yuz wayt PP we dɛn dɔn trit wit Korona fɔ print wɔnin sayn dɛn, wokshɔp sayn dɛn, bag tag dɛn, displei panɛl dɛn, advatayzmɛnt bɔd dɛn ɛn pɔynt-ɔf-sɛl kɔmpɔnɛnt dɛn.

Dekorativ ɛn Kraft Prodakt dɛn

Dekorativ aplikeshɔn dɛn inklud lampshades, plesmat, foto-albam bod, kraft shit, mɔdel kɔmpɔnɛnt ɛn akwariɔm bakgrɔn.

Indastrial Kɔmpɔnɛnt dɛn

Dɛn kin mek PP shit dɛn to protɛktiv layna, sɛparatɔ shit, ilɛktrik barɛri, mashin gad, panɛl dɛn we nɔ de mek kemikal ɛn kɔstɔm industrial pat dɛn.

Wait PP Sheet vs. PVC, PET ɛn HIPS Shit

Di matirial sɛlɛkshɔn fɔ bi bay di prodak we dɔn dɔn, di stiffness we dɛn nid, di we aw dɛn de print, di saykl dɛn we dɛn de fold, di we aw dɛn de mek di tin dɛn, di we aw dɛn de ɛksplɔz di kemikal, di rigyuleshɔn dɛn ɛn di totɛl kɔst we dɛn dɔn kɔnvɔyt.

Di tin dɛn we yu fɔ tink bɔt aw fɔ pak it ɛn aw fɔ fala di lɔ

Dɛn kin yuz polipropilɛn bɔku bɔku wan fɔ pak it, bɔt dɛn nɔ fɔ trit wan standad industrial PP shit ɔtomɛtik wan lɛk aw dɛn dɔn gri fɔ mek dɛn kɔntakt it dairekt wan. Di kɔmplians dipen pan di rɛsin, aditiv, kala masta batch, risaykul kɔntinyu ɛn prodakshɔn kɔndishɔn.

Di wan dɛn we de bay we nid fɔ gɛt tin fɔ it fɔ kɔntakt fɔ tɔk bɔt di kayn it, di tɛmpracha we dɛn go kɔntakt, di tɛm we dɛn go kɔntakt, di we aw dɛn de mek di tɛmmofɔm, di kɔntri usay dɛn de go ɛn di rigyuleshɔn we dɛn go yuz.

Fɔd-kɔntakt dɔkyumentri fɔ chɛk agens di ɛksaktɔ gred, kɔlɔ, tik ɛn prodakshɔn spɛsifikɛshɔn we dɛn de bay.

Yuz na do ɛn di tin dɛn we yu fɔ tink bɔt fɔ di tɛmpracha

Standard PP sheet na men wan fɔ indo ɔ kɔntrol aplikeshɔn dɛn. lכng tεm ultraviolet εksposhכn kin afekt di kכla, di sכfayz kכndishכn εn di mεkanikal prכpati dεm εnles dεn spεsifiket wan UV-stabilized fכmyuleshכn.

Di prɛktikal ɔpreshɔn-tɛmpracha rɛnj dipen pan PP gred, tiknɛs, lod, aditiv, fɔm istri ɛn ɛksplɔshɔn durayshɔn. Test fɔ riprodyuz aktual ɔpreshɔn, stɔrɔj ​​ɛn transpɔt kɔndishɔn.

Lɔw tɛmpracha kin ridyus fleksibiliti ɔ impak pefɔmɛns, we sɔstayn ɔt ɛn mɛkanikal lod kin mek difɔmeshɔn. Krio projɛkt dɛn nid fɔ gɛt gred-spɛsifi k tɛknikal data.

Rikɔmɛnd Sampl ɛn Kwaliti Chɛk

• Tiknes, sheet dimɛnshɔn ɛn dimɛnshɔnal tolɛreshɔn.

• Wait kala, opasiti ɛn batch-to-batch kala kɔnsistɛns.

• Smɔl, mat, frɔst ɔ ɛmbos sɔfays apinans.

• Fleksibiliti, rigiditi ɛn impak bihayvya.

• Kɔt, panch ɛn day-kɔt ed kwaliti.

• Kris, fold ɛn liv-hinj taya.

• Printin adhesion ɛn nid sɔfays ɛnaji.

• Welding ɔ adhesive-bonding trɛnk.

• Thermoforming shrinkage, drɔ dip ɛn wɔl distribyushɔn.

• Kεmikכl, tεmprachכ εn כda εkspכzכn pεrformεns.

• Antistatik, kɔnduktiv ɔ flaym-rɛtardant tɛst rizɔlt usay i apɔynt.

Kastom Wait PP Sheet Opshɔn fɔ B2B Baya dɛn

HSQY de sɔpɔt polypropylene sheet projɛkt fɔ pak kɔnvɔta, thermoforming kɔmni, printa, steshɔnari manifakta, fut faktri, apɛl saplay, sayn mek, distribyushɔn ɛn industrial fabricator.

• Kastom tiknes frɔm 0.25 mm to 5 mm.

• Standart ɛn kɔstɔm-kɔt sheet dimɛnshɔn dɛn.

• Wait, blak, klia ɛn kɔstɔmayt kɔlɔ dɛn.

• Smɔl, mat, frɔst ɛn ɛmbos sɔfays tɛkstɔr.

• Kɔrona-trit sɔfays fɔ print ɛn lamin.

• Antistatik, kɔnduktiv ɛn flaym-rɛtardant fɔmyulashɔn dɛn.

• Protektiv film ɛn kɔstɔm sɔfays protɛkshɔn.

• Shit kot, palet pak ɛn kɔstɔmayz ɛkspɔt pak.

• Sampul fɔ print, fold, wɛldin ɛn thermoforming tɛst.

Infɔmeshɔn we yu nid fɔ mek yu gɛt PP Sheet Quote

• Tik ɛn tolɛreshɔn we dɛn nid.

• Shit wit, lɔng ɛn kɔt tolɛreshɔn.

• Wait, blak, klia ɔ kɔstɔm kɔlɔ.

• Smɔl, mat, frɔst ɔ ɛmbos sɔfays.

• Rikwayd opasiti ɔ kɔlɔ-match rɛfrɛns.

• Print, fold, wɛldin ɔ thermoforming we fɔ du am.

• Korona-tritmɛnt ɔ dayn-lɛvɛl rikwaymɛnt.

• Antistatik, kɔnduktiv ɔ flaym-rɛtardant spɛsifikɛshɔn.

• Trayal kwantiti, bulk kwantiti ɛn ɛni ia dimand.

• Di tin dɛn we dɛn nid fɔ pak ɛn protɛkt-fim.

• Destination port ɛn di de we dɛn nid fɔ sɛn am.

• Fɔd-kɔntakt, ilɛktrik, flaym ɔ ɔda kɔmplians dɔkyumentri.

Send Yu Wait PP Sheet Rikwaymɛnt dɛn

Pakɛj ɛn Delivri

Pak tayp: PE bag wit kraft pepa, ɔ PE rap film wit protɛktiv kɔna ɛn wud palet.

Standart pak saiz: 4 × 8 ft shit ɔ kɔstɔmayz akɔdin to shit dimɛnshɔn ɛn di kɔstɔma rikwaymɛnt.

Surface protection: Dɛn kin yuz protɛktiv film, kraft pepa, kɔna protɛkshɔn ɛn palet riinfɔsmɛnt fɔ ridyus skrach, kɔntaminɛshɔn ɛn ed damej.

Kastom pak: Dɛn kin tɔk bɔt di wet fɔ di palet, di kɔnt fɔ di shit, di lɛbl dɛn, di barɔd dɛn ɛn di mak dɛn fɔ ɛkspɔt akɔdin to di tin dɛn we dɛn nid fɔ du na di westɛm ɛn fɔ ɔndo.

Tipik prodakshɔn tɛm: Aprɔksimatli 7-10 dez afta pemɛnt ɛn spɛsifikɛshɔn aprɔval, sɔbjɛkt to kɔlɔ, tɛkstɔr, fɛnshɔnal gred, ɔda kwantiti ɛn prodakshɔn schedule.

Wetin Mek Yu Pik HSQY as Yu Wait PP Shit Splaya?

HSQY Plastic Group de saplae PP, PVC, PET, CPET ɛn ɔda plastic sheet ɛn pak matirial dɛn to kɔnvɔta, printa, tɛmfɔmin kɔmni, steshɔnari manifakta, distribyushɔn ɛn industrial bayer.

• Fit 0.5 mm, 1 mm ɛn 2 mm wayt PP sheet dɛn.

• Broda kɔstɔm tiknɛs de frɔm 0.25 mm to 5 mm.

• Standart ɛn kɔstɔm-kɔt sheet dimɛnshɔn dɛn.

• Bɔku bɔku kɔlɔ dɛn ɛn ɛmbos sɔfays patɛn dɛn.

• Print-kɔmpatibl, antistatik, kɔnduktiv ɛn flame-rɛtardant opshɔn dɛn.

• Sampul fɔ apia ɛn prɔsesin tɛst.

• Protektiv film ɛn kɔstɔmayz ɛkspɔt pak.

• Bulk prodakshɔn sɔpɔt fɔ distribyushɔn ɛn OEM prɔjek dɛn.

Bifo bɔlk prodakshɔn, di kɔstɔma dɛn fɔ tɛst di PP sheet we dɛn dɔn pik wit dɛn aktual printin ink, day-katin tul, kris dizayn, wɛldin ikwipmɛnt, adeziv ɛn tɛmfɔmin mold.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt wayt PP Plastik Shit dɛn

Wetin na wayt PP plastic sheet?

Wan wayt PP plastic sheet na wan opaque sheet we dɛn mek wit polypropylene. I layt, i nɔ de mek wata ɛn i fayn fɔ pak, steshɔnari, sayn, tɛmplat, tɛmɔfɔm ɛn industrial fabrikeshɔn.

Wetin na di difrɛns bitwin 0.5 mm, 1 mm ɛn 2 mm PP sheet?

Wan 0.5 mm PP sheet na rili fleksibul ɛn i fayn fɔ fɔlda, layt pak ɛn kɔba prodak. 1 mm sheet de balans fleksibiliti ɛn rigiditi, we 2 mm sheet de gi big sɔpɔt fɔ panɛl, rigid insɛt ɛn industrial pat dɛn.

0.5 mm PP sheet fayn fɔ fold bɔks?

I kin fayn fɔ layt foldin bɔks, fɔlda ɛn pak strɔkchɔ. Dɛn fɔ tɛst di bɔks dimɛnshɔn dɛn we dɔn dɔn, di wet we di prɔdak gɛt, di kris dizayn ɛn di stiffnɛs we dɛn nid.

Na 1 mm PP sheet de fleksibul?

1 mm PP sheet nכmal wan de gi bεlε fכ fleksibiliti εn rigiditi. I aktual bending bihayvya dipen pan resin gred, aditiv, shit dimɛnshɔn ɛn tɛmpracha.

Na 2 mm PP sheet na rigid?

2 mm PP sheet kin rigid pas 0.5 mm ɔ 1 mm matirial, bɔt i kin stil nɔ rigid pas sɔm injinɛri plastic dɛn. Panel dimɛnshɔn, sɔpɔt spays ɛn lod afɛkt finish stiffnɛs.

Yu tink se dɛn kin fold PP sheet dɛn bɔku bɔku tɛm we dɛn nɔ brok?

Suitabl PP gred kin gi gud ripit-fold ɛn liv-hinj pefɔmɛns we dɛn yuz di kɔrɛkt tik, hinj dairekshɔn, kris jɔyometri ɛn prɔsesin we.

Yu tink se dɛn kin mek wayt polipropilɛn shit we gɛt tɛmmofɔm?

Yɛs. Di rayt gred dɛn kin bi vaykum fɔm ɔ prɛshɔn fɔm insay trey, kɔva, kɔntena ɛn shep pat dɛn. Di ɔt, dizayn fɔ mold, shrinkage ɛn di distribyushɔn na di wɔl nid fɔ tɛst.

Yu tink se dɛn kin print PP sheet dɛn?

Yɛs, bɔt polipropilɛn gɛt smɔl ɛnaji we de ɔp. Korona tritmɛnt, flaym tritmɛnt, prayma ɔ kɔmpitabl PP ink kin nid fɔ gɛt rili adheshon.

Wetin na PP sheet we dɛn dɔn trit wit korona?

PP we dεn trit wit Korona dεn dכn כnda wan sכfa-aktivεshכn prכsεs we de inkrεs di sכfayz εnεji εn εp ink, kכt כ adeziv fכ wet di sכfa mכr ifektiv.

Yu tink se korona tritmɛnt de kɔntinyu fɔ wok fɔ ɔltɛm?

Surface-treatment effectiveness kin dכn we dεn de stכr am. Di wan dɛn we de bay fɔ chɛk di dayn lɛvɛl bifo dɛn print ɛn gi di de we dɛn de op fɔ print we dɛn de ɔda PP sheet we dɛn dɔn trit.

Yu tink se dɛn kin wɛldɔm polipropilɛn sheet dɛn?

PP kin jɔyn yuz kɔmpitabl ɔt-wɛldin prɔses, inklud ɔt-ɛya, ɛkstrushɔn ɛn ɔltrasɔnik we. Jɔyn dizayn ɛn wɛldin sɛtin fɔ tɛst.

Yu tink se dɛn kin glu PP sheet?

PP we nɔ trit kin at fɔ bon wit kɔvɛnshɔnal adhesives. Sɔntɛm dɛn go nid fɔ trit di sɔfays ɛn wan adeziv we dɛn mek fɔ plastic dɛn we nɔ gɛt bɔku ɛnaji.

Yu tink se wayt PP sheet dɛn fayn fɔ pak it?

Fɔd-kɔntakt suitability dipen pan di ɛksaktɔ rɛsin, aditiv, masta batch ɛn aplikebul rigyuleshɔn. Di wan dɛn we de bay fɔ sho di kayn it, di kɔntakt kɔndishɔn ɛn di say we dɛn de go na di makit.

Yu tink se PP plastic sheet dɛn kin risaykul?

Polypropylene na tin we dɛn kin no bay rɛsin kɔd 5. Aktual risaykul dipen pan lokal kɔlɛkshɔn, sɔt, kɔntaminɛshɔn, aditiv ɛn risaykul infrastukchɔ.

Yu kin yuz PP sheet na do?

Standard PP na men wan fɔ yuz insay os. Di aplikeshɔn dɛn na do kin nid fɔ gɛt UV-stabilized matirial ɛn tɛst fɔ san layt, wɛda, tɛmpracha ɛn di savis layf we dɛn de op fɔ.

Antistatik ɛn kɔnduktiv PP sheet dɛn de?

Yɛs. Di wan dɛn we de bay fɔ gi di sɔfa-rɛsistɛns rɛnj we dɛn nid, kɔlɔ, tik, di we aw dɛn de tɛst ɛn di ESD aplikeshɔn we dɛn want.

Yu tink se PP sheet dɛn we nɔ de mek faya de?

Dɛn kin tɔk bɔt di fɔmyulashɔn dɛn we nɔ de mek faya. Di raytin we dɛn nid, di we aw dɛn de tɛst am, di tik ɛn di kɔlɔ fɔ bi bikɔs di aditiv dɛn we nɔ de mek faya kin chenj di prɔpati dɛn we di matirial gɛt ɛn di we aw dɛn de mek am.

Yu tink se dɛn kin mek di kɔlɔ ɛn di we aw di tin de apin?

Yɛs. HSQY de sɔpɔt wayt, blak, klia ɛn kɔstɔm kɔlɔ dɛn wit mat, frɔst, twil, bark, ɔrɛnj-pil, fayn-tɛkstɔr ɛn kɔs-tɛkstɔr finish.

HSQY kin kot PP sheet to kɔstɔm dimɛnshɔn?

Yɛs. Kastom-kat dimɛnshɔn dɛn kin sapla akɔdin to tik, kɔt tolɛreshɔn, minim ɔda kwantiti ɛn prodakshɔn fisibiliti.

Yu tink se wayt PP sheet sampul dɛn de?

Limitɛd-sayz sɛmpul dɛn kin de fɔ chɛk tik, kɔlɔ, tɛkstɔr, printin, fold, wɛldin ɛn tɛmfɔmin pefɔmɛns. Di wan dɛn we de bay kin kɔba di freyt we dɛn kin kɛr go.

Wetin na di tipik prodakshɔn tɛm?

Standart prodakshɔn nɔmal fɔ tek lɛk 7-10 dez afta dɛn dɔn pe ɛn spɛsifikɛshɔn aprɔval. Kastom kɔlɔ, tɛkstɔr ɛn funkshɔn gred kin nid mɔ tɛm.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot PP sheet?

Gi di tik, dimɛnshɔn, kwantiti, kɔlɔ, sɔfays tɛkstɔr, printin tritmɛnt, funkshɔn rikwaymɛnt, aplikeshɔn, prɔsesin we, pak, dɛstineshɔn ɛn rikwayd kɔmplians dɔkyumɛnt dɛn.

Get wan Kastom Wait PP Sheet Kot