PVC vs PET: Us matirial bɛtɛ fɔ pak?

PVC vs PET Packaging: Us Matirial Bɛtɛ?

PVC ɛn PET na tu tɛmplastik matirial dɛn we dɛn kin yuz bɔku bɔku wan fɔ pak rigid, thermoformed trey, blister pak, klamshɛl, folding bɔks ɛn protɛktiv prodak pak. Pan ɔl we klia rigid PVC shit ɛn PET shit kin luk lɛk, dɛn difrɛn pan tɛmfɔmin bihayvya, ɔt silin, impak pefɔmɛns, risaykul kɔmpatibiliti, rigyuletɔri pozishɔn ɛn fayn ɛnd-yuz aplikeshɔn dɛn.

Wetin Na PVC Pakɛj Matirial?

PVC tinap fɔ polyvinyl klorayd. Na wan versatile thermoplastic we dɛn kin mek lɛk rigid sheet ɔ fleksibul film bay we dɛn chenj in fɔmyulashɔn ɛn aditiv sistɛm.

Rigid PVC we dɛn kin yuz fɔ blista pak, klamshɛl ɛn thermoformed pak nɔmal fɔ gɛt smɔl ɔ nɔ gɛt ɛni plasticizer. I nɔ fɔ kɔnfyus wit fleksibul PVC film, we gɛt plasticizers fɔ gi soft ɛn fleksibiliti.

Rigid PVC na valyu fɔ in fɔm kɔnsistɛns, dimɛnshɔnal stebiliti, kemikal rɛsistɛns, printabiliti, day-kɔtin pefɔmɛns ɛn kɔmpatibiliti wit wan big rɛnj ɔf ɔt-sil kɔtin ɛn adeziv.

Kɔmɔn PVC Pakɛj Aplikeshɔn dɛn

• Famasiutik tablɛt ɛn kapsul blista pak

• Medikal divays pak ɛn thermoformed trey dɛn

• Ritayl blista pak ɛn klamshɛl

• Hadwɔd, steshɔnari ɛn ilɛktronik aksesɔri pak

• Klia bɔks dɛn we dɛn kin fold ɛn plastic katon dɛn we dɛn print

• RF-welded pak ɛn fleksibul vaynil prodak

• PVC shrink film ɛn tamper-evident sliv aplikeshɔn dɛn

Wetin Na PET Pakɛj Matirial?

PET tinap fɔ polyethylene terephthalate. Na polyester thermoplastic we dɛn sabi fɔ in klia, trɛnk, tafnɛs, dimɛnshɔnal stebiliti ɛn fit fɔ bɔku it, drink ɛn kɔshɔma pak aplikeshɔn dɛn.

Di wɔd PET pak kin tɔk bɔt sɔm tin dɛn we gɛt fɔ du wit am. Di kɔrɛkt gred fɔ no bifo dɛn kɔmpia PET wit PVC bikɔs APET, RPET, CPET ɛn PETG gɛt difrɛn prɔsesin ɛn pefɔmɛns kwaliti dɛn.

APET

APET min amorphous polyethylene tεrεftalayt. Dɛn kin yuz am fɔ klia tɛmfɔm trey, lid, klamshɛl, frut kɔntena, bekɛri pak, kɔsmɛtik pak ɛn rital displei pak.

RPET we dɛn kɔl RPET

RPET na PET we gɛt risaykul matirial. I kin gɛt tin dɛn we dɛn dɔn risaykul afta dɛn dɔn yuz am ɔ afta dɛn dɔn yuz di industri. Di prɔpɔshɔn ɛn di ples we dɛn put di tin dɛn we dɛn dɔn risaykul dipen pan di sheet strɔkchɔ, di we aw dɛn fɔ luk ɛn di rigyuleshɔn dɛn we dɛn kin yuz fɔ kɔntakt it.

CPET we dɛn kɔl CPET

CPET na kristalin PET we dɛn mek fɔ ay-tɛmpracha aplikeshɔn dɛn lɛk friza-to-ɔvin rɛdi-mil trey. Nɔ fɔ trit am lɛk se i gɛt di sem ɔt pefɔmɛns lɛk standad klia APET shit.

PETG we dɛn kɔl PETG

PETG na glycol-modified PET. I de gi fayn fayn klia, tafnɛs, fɔm pefɔmɛns ɛn bonding opshɔn dɛn. PETG de yuz insay mɛdikal pak, klia bɔks, displei ɛn aplikeshɔn dɛn we nid izi fɔ mek ɔ RF siling. Bɔt, dɛn nɔ fɔ trit PETG ɔtomɛtik wan lɛk se i ikwal to standad PET insay mɛkanikal risaykul sistɛm dɛn.

PVC vs PET Paket Kɔmpiashɔn

Di tebul we de kam biɛn ya kɔmpia rigid PVC pak sheet wit standad klia APET pak sheet. Speshal gred, kotin, multilayer strɔkchɔ ɛn aditiv kin chenj di pefɔmɛns fɔ ɛni wan pan di matirial dɛn.

Yu tink se PET Transparent Pas PVC?

Ɔl tu di rigid PVC ɛn APET kin prodyuz wit ay transparency. I nɔ kɔrɛkt fɔ tɔk se PVC na fɔ pak nɔmɔ we nɔ gɛt displei.

Bɔku tɛm dɛn kin pik APET fɔ prɛmiɔm rital ɛn it pak bikɔs i kin gi nyutral, glas-layk apinans wit strɔng prodak visibiliti. Klia PVC kin sho smɔl blu tɔyn, bɔt ay kwaliti rigid PVC shit kin stil gi fayn fayn transparency fɔ famasitik blista pak, klia bɔks ɛn rital klamshɛl.

Faynal klia dipen pan rεsin kwaliti, risaykul kכntεnt, shit tik, sכfayz finish, εkstrushכn kכntrכl, aditiv εn tεmכfכm kכndishכn pas di polimכr nem nכmכ.

PVC vs PET Tεrmoforming Pεrformεns

PVC Tɛmofɔmin

Rigid PVC na tin we dɛn kin yuz bɔku bɔku wan fɔ mek thermoforming bikɔs i kin sof prɛdiktibɛl, i kin mek ditayla kaviti ɛn jɔs de gi fɔgiv prɔsesin winda. I kin fayn fɔ dip-drɔ blista kaviti, kɔmpleks shep ɛn aplikeshɔn dɛn we nid fɔ rili denɛst.

PVC in prɔsesin bihayvya kin ɛp fɔ ridyus di prɔblɛm fɔ chenj frɔm wan paket shep to ɔda wan. Bɔt fɔ kɔntrol di tɛmpracha stil impɔtant bikɔs if yu ɔt pasmak, i kin mek di kɔlɔ chenj, pwɛl ɔ i kin mek yu prosɛs di fum.

PET Tɛmofɔmin

APET de gi strɔng thermoformed pat dɛn wit ay klia ɛn gud rigiditi. Dɛn kin yuz am fɔ it tre, klamshɛl, kek dome, lid ɛn rital paket.

PET prɔsesin kin nid fɔ gɛt klos kɔntrol fɔ di shit tɛmpracha, mold tɛmpracha, fɔm rɛsɛshɔn ɛn kol kɔndishɔn. If yu wam pasmak, i kin mek yu kristaliz, haz ɔ ridyus fɔm kwaliti. Di kɔndishɔn fɔ tul ɛn kɔt kin nid bak fɔ ajɔst we dɛn de kɔnvɔyt frɔm PVC to PET.

PET kin Riples PVC pan di Tɛmofɔmin Ikwipmɛnt dɛn we dɔn de?

PET kin prosɛs pan bɔku tɛmfɔmin layn dɛn we dɛn bin de yuz fɔs fɔ PVC, bɔt dɛn nɔ fɔ trit am lɛk ɔtomɛtik drɔp-in riplesmɛnt. Hɛt profayl, fɔm tɛmpracha, plɔg-ɛsist dizayn, kol tɛm, trim tul ɛn stak bihayvya kin nid fɔ chenj.

Prodakshɔn trayal fɔ evalyu di wɔl-tiknɛs distribyushɔn, kɔna difinishɔn, flɛnch flatnɛs, transparency, impak rɛsistɛns, trim kwaliti ɛn layn spid bifo wan kɔmɛshɔnal matirial kɔnvɛnshɔn.

PVC vs PET Hɛt Silin ɛn RF Wɛldin

Hɛt-Sil Kɔmpatibiliti

Rigid PVC na tin we dɛn kin pik fɔ pak wit blista-kad bikɔs i de wok wit bɔku bɔku ɔt-sil kɔtin dɛn. Dis kin gi wan brayt prɔsesin winda ɛn stebul silin pefɔmɛns pan establish blista pak layn dɛn.

Standard PET nɔmal wan nid fɔ gɛt kɔtin, adeziv, laminated siling layt ɔ kɔmpitabl liding film. Sil pefɔmans dipen pan tɛmpracha, prɛshɔn, tɛm fɔ de, sɔfa tritmɛnt, flɛnch klin ɛn di kɔtin sistɛm we dɛn dɔn pik.

Redio-Frikuɛns Wɛldin

PVC de ansa fayn to redio-frikyuɛnsi wɛldin ɛn dɛn kin yuz am bɔku bɔku wan fɔ wɛld paus, mɛdikal bag, inflatable prodak ɛn sɔm transparent paket dɛn.

Standard APET na jɛnɛral less suitable fɔ RF wɛldin. We wan prɔjek nid fɔ mek PET-famili klia togɛda wit RF silin, dɛn kin tink bɔt ɛn tɛst PETG ɔ wan spɛshal ɛnjinia strɔkchɔ.

PVC vs PET Barɛri Pɛfɔmɛns

Baria pefɔmans fɔ evaluate agens di prodak in aktual sɛnsitiviti to mɔstɔ, ɔksijɛn, aroma, layt, gris ɛn kemikal kɔntakt. Nid besik PVC ɔ APET de gi di bɛst barɛri fɔ ɛvri prɔdak.

Famasiutik Blister Barɛri

Rigid PVC na kɔmɔn fɔm wɛb fɔ famasitik blista pak bikɔs i de fɔm izi wan ɛn sɔpɔt push-thru blista dizayn. Besik PVC gɛt limited mɔstɔ-baria pefɔmɛns fɔ mɛrɛsin dɛn we rili sɛnsitiv.

So, famasitik pak kin yuz PVC we dɛn kɔt wit PVDC, PVC we dɛn lamin wit PCTFE, multilayer film ɔ aluminium-based kol-fɔm strɔkchɔ we dɛn nid fɔ gɛt strɔng mɔstɔ ɛn ɔksijɛn protɛkshɔn.

Barrier fɔ pak tin fɔ it

APET de gi yusful gas ɛn aroma barɛri prɔpati fɔ bɔku it dɛn we dɛn dɔn kol, bekɛri prɔdak, prodɔkt ɛn kɔshɔma guds. Bɔt, it dɛn we de liv lɔng, fresh mit, modifyed atmosfɛs pak ɛn ɔksijɛn-sɛnsitiv prɔdak dɛn kin nid PET/PE, PET/EVOH/PE ɔ ɔda multilayer baria strɔkchɔ.

Shelf layf fɔ validet yuz di trey we dɔn dɔn, liding film, sil, it prodak, stɔrɔj ​​tɛmpracha ɛn gas miksɔp. Matirial nem dɛn nɔmɔ nɔ go ebul fɔ tɔk bɔt di layf we dɛn go yuz fɔ sɛl.

PVC vs PET fɔ Pakɛj Fɔd

PET na tin we dɛn kin yuz bɔku bɔku wan fɔ pak it ɛn drink bikɔs i klia, i trɛnk, i layt, i kin de na risaykul-kɔntinɛnt gred ɛn dɛn kin yuz am na bɔtul ɛn kɔntena dɛn we dɛn dɔn mek wit tɛmɔfɔm.

Di rayt aplikeshɔn dɛn na frut tre, salad kɔntena, bekɛri bɔks, deli tre, kek dome, klia lid, drink bɔtul ɛn ɔda frij ɔ ambient prɔdak dɛn.

Rigid PVC kin yuz bak fɔ spɛshal it-kɔntakt pak we di rɛsin, stebyulayza, aditiv ɛn kɔmplit fɔmyulashɔn de fala di rigyuleshɔn fɔ di it we dɛn want ɛn di kɔndishɔn fɔ yuz. So i nɔ kɔrɛkt fɔ tɔk se ɔl PVC nɔ fayn fɔ kɔntakt it.

Bɔt pan ɔl dat, bɔku it brand ɛn ritayla dɛn kin lɛk PET bikɔs dɛn kin aksept dɛn na di makit, dɛn kin gɛt tin dɛn we dɛn dɔn risaykul ɛn dɛn kin kɔmpit wit di we aw dɛn kin pak tin dɛn we dɛn kin yuz fɔ pak tin dɛn we dɛn kin yuz fɔ mek tin dɛn we dɛn kin yuz fɔ mek tin dɛn we dɛn kɔl PET.

PVC vs PET fɔ Famasiutik Blista Pakɛj

Wetin Mek Dɛn De Yuz PVC

Rigid PVC stil bi wan we dɛn kin yuz bɔku bɔku wan fɔm fim fɔ famasi tablɛt ɛn kapsul blista bikɔs i de kɔba thermoformability, klia, kɔntrol kaviti kollaps, kɔmpatibiliti wit aluminiɔm push-thru fɔyl ɛn establish prodakshɔn pefɔmɛns.

We Dɛn kin Tink bɔt PET

APET, PETG ɛn spɛshal polyɛsta strɔkchɔ dɛn kin evalyu we wan prɔjek nid fɔ gɛt PVC-fri pakej, ay tafnɛs, difrɛn sterilayzeshɔn we ɔ alaynɛshɔn wit wan spɛshal matirial strateji.

Fɔ chenj wan famasitik blista frɔm PVC to PET nɔ nid fɔ pik wan sem kayn sheet tik. Di fɔm prɔses, lidding kɔmpatibiliti, sil intɛgriti, mɔstɔ barɛri, ɔksijɛn barɛri, stebiliti data ɛn rigyuletɔri dɔkyumentri fɔ rivalidet.

PVC vs PET fɔ Ritayl Blista ɛn Klamshɛl

Pik PVC We

• Di layn we de naw na optimiz fɔ PVC thermoforming

• Wan brayt ɔt-sil kɔtin winda nid fɔ de

• RF welding na pat pan di pak prɔses

• Di dizayn nid fɔ izi fɔ kɔt day ɛn fɔm kɔmpleks

• Lokal rigyuleshɔn ɛn kɔstɔma spɛsifikɛshɔn dɛn de alaw PVC

Pik PET We

• Nyutral klia ɛn prodak visibiliti na men prɔyorities

• Di kɔstɔma de aks fɔ PET ɔ risaykul PET kɔntinyu

• Di brand gɛt wan PET-fɔs pak strateji

• Ay trɛnk ɛn impak pefɔmɛns nid fɔ de

• Di paket na fɔ wan PET kɔlɛkshɔn ɛn risaykul sistɛm we de

Advantej ɛn Limiteshɔn fɔ PVC Pakɛj

Advantej dɛn fɔ Rigid PVC

• Brod ɛn fɔgiv thermoforming winda

• Gud ditel riprodakshɔn fɔ blista kaviti

• I kɔmpitabl wit bɔku ɔt-sil kɔtin dɛn

• I fayn fɔ RF wɛldin

• Gud printabiliti, bonding ɛn day-kɔtin pefɔmɛns

• I de insay klia, kɔlɔ, opaque ɛn spɛshal gred dɛn

• Established yus in famasitik ɛn mɛdikal pak

Limiteshɔn dɛn fɔ Rigid PVC

• Limitɛd kɔshɔma kɔlɛkshɔn ɛn risaykul akses na bɔku rijyɔn dɛn

• Kin kɔntamin PET risaykul we dɛn nɔ sɔt am di rayt we

• Rikways kɔntrol prɔsesin fɔ avɔyd thermal degradation

• I kin fes ritayla, brand ɔ makit-spɛsifi k matirial ristrikshɔn

• Besik PVC kin nid kotin fɔ ay famasitik barɛri pefɔmɛns

• Fleksibul PVC fɔmyulashɔn dɛn nid fɔ tek tɛm kɔntrol di plasticizer ɛn aditiv kɔmplians

Advantej ɛn Limiteshɔn fɔ PET Pakɛj

Di bɛnifit dɛn we PET gɛt

• High transparency ɛn nyutral vijual apinans

• Gud trɛnk, tafnɛs ɛn dimɛnshɔnal stebiliti

• Dɛn kin yuz am bɔku say fɔ it, drink ɛn fɔ pak tin dɛn na rital

• Available wit post-kɔnsuma risaykul kɔntinyu

• Mɔ establish kɔshɔma risaykul rɛkɔgnishɔn pas PVC

• I fayn fɔ tre, klamshɛl, lid, bɔtul ɛn klia bɔks

• Kin sɔpɔt laytwɛt paket dizayn we dɛn ɛnjɛnɛri am fayn fayn wan

Di tin dɛn we PET nɔ ebul fɔ du

• May nid tayt thermoforming temperechur kontrכl

• Standard APET nɔ fayn fɔ kɔvɛnshɔnal ɔvin ɔt

• Bɔku tɛm fɔ mek yu sidɔm wit ɔt, yu nid fɔ gɛt kɔtin ɔ silin layt we go gri wit am

• Trim ɛn day-kat tul kin nid fɔ ɔptimayz

• PETG ɛn sɔm multilayer strɔkchɔ dɛn nɔ kin kɔmpit wit standad PET risaykul

• Dɛn nɔ kin gɛda PET tɛmɔfɔm dɛn na ɛvri lokal risaykul program

• Di ay risaykul kɔntinyu kin afɛkt di kɔlɔ, klia ɛn fɔm kɔnsistɛns

Yu tink se PET De Sastaynɛbul Pas PVC?

PET kin gɛt advantej pan kɔshɔma pak bikɔs bɔku pipul dɛn no ɛn gɛda PET bɔtul dɛn, ɛn kɔmɛshɔnal RPET sapɔt chen dɛn kin machɔ we dɛn kɔmpia dɛn. PET pak kin inkɔrpɔret bak post-kɔnsuma risaykul matirial we di apinɛns, prɔsesin ɛn it-kɔntakt rikwaymɛnt dɛn alaw.

Bɔt i tu brayt fɔ diskraib ɛvri PET pakej se i nɔ de ambɔg di envayrɔmɛnt ɔ i kin risaykul ɔl. Dɛn nɔ kin tek PET trey ɛn klamshɛl ɛnisay we dɛn gɛda PET bɔtul dɛn. Lebul, adeziv, dak kɔlɔ, barɛri layers, absɔbɛnt pad ɛn PETG kɔmpɔnɛnt dɛn kin ridyus bak di kɔmpitibliti fɔ risaykul.

PVC na teknikal risaykul, ɛn spɛshal PVC risaykul sistɛm dɛn de. I prɛktikal limit na dat kɔlɛkshɔn, aydentifikeshɔn ɛn ɛnd-maket akses nɔ de bɔku fɔ bɔku smɔl kɔshɔma pakej dɛn.

Wan mininful sastaynabiliti asɛsmɛnt fɔ tink bɔt di matirial wet, risaykul kɔntinyu, paket-to-prɔdakt rishɔ, prodak protɛkshɔn, fud-west prɛvenshɔn, transpɔt efyushɔn, aktual lokal kɔlɛkshɔn ɛn di kwaliti fɔ di risaykul ɛnd makit.

Disain PET Pakɛj fɔ Risaykul

• Yuz wan klia PET bays strɔkchɔ we i pɔsibul

• Minimiz inkompatibl polimכr dεm εn mכltilayεr kכmכpכnt dεm

• Selekt lɛbl, ink ɛn adeziv dɛn we dɛn mek fɔ PET risaykul

• Nɔ gɛt dak kɔlɔ pasmak we go mek yu nɔ ebul fɔ sɔt

• Disain di pakej fɔ ɔtomatik optik ɛn dimɛnshɔnal sɔt

• Verifay se dɛn aksept PET tɛmɔfɔm dɛn na di target makit bifo yu mek risaykul klem

Yu tink se PVC ɔ PET de Kɔst Mɔ?

No pɔrmanent lɔ nɔ de fɔ se PET kin kɔst mɔ pas PVC ɔltɛm ɔ PVC na di tin we dɛn kin pak we nɔ kin tek bɔku mɔni ɔltɛm. Di prayz fɔ rɛsin kin chenj bay kɔntri, di kɔst fɔ ɛnaji, di kɔndishɔn fɔ sapɔt, di tin dɛn we dɛn nid fɔ gɛt we dɛn risaykul ɛn di tɛm we dɛn kin ɔda.

Di totɛl pakej kɔst fɔ inklud:

• Sheet prays fɔ wan kilogram

• Material density ɛn pat dɛn we dɛn kin mek fɔ wan kilogram

• Di tik we dɛn nid fɔ mek di sheet

• Tεrmoforming saykl tεm εn εnεji yus

• Trim skrap ɛn in-haus regrind rikavari

• Tul ɛn ikwipmɛnt modifyeshɔn dɛn

• Hɛt-sil kɔtin, adeziv ɛn lid matirial

• Brekage, rijekshɔn ɛn pak-layn efyushɔn

• Risaykul-kɔntinɛnt ɔ kɔmplians rikwaymɛnt dɛn

• Ɛkstend prodyusɔ rispɔnsibiliti ɛn west-mɛnejmɛnt fi

Wan matirial we gɛt ay prays fɔ wan kilogram kin stil prodyuz lɔwa totɛl pak kɔst if i alaw fɔ dɔŋ, ay layn spid, smɔl paket we dɔn pwɛl ɔ bɛtɛ prodak protɛkshɔn.

Aw fɔ Pik Bitwin PVC ɛn PET Pakɛj

Infɔmeshɔn fɔ Gi Yu Sheet Supplier

• Finished pakej tayp ɛn prodak we dɛn de pak

• Rikwayd sheet tik, wit ɛn rol dayamita

• Klia, kɔlɔ, mat, frɔst ɔ opaque apinans

• Termoforming mashin ɛn di we aw dɛn de ɔt

• Fɔm dip ɛn kaviti jɔyometri

• Hɛt silin, adhesive bonding ɔ RF-wɛldin we

• Fɔd, famasi, mɛdikal ɔ industrial kɔntakt rikwaymɛnt dɛn

• Barɛri ɛn shelf layf we dɛn nid

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt dɛn

• Di kɔntri we yu want fɔ go ɛn di spɛsifikɛshɔn dɛn we di kɔstɔma dɛn want

• Di volyum fɔ ɔda tin dɛn we dɛn kin du ɛvri mɔnt ɔ ɛvri ia

Kɔmɔn Mistek We Dɛn Kɔmpia PVC ɛn PET

Trit Ɛvri PVC Fɔmulashɔn lɛk di sem

Rigid unplasticized PVC, fleksibul plasticized PVC, famasitik PVC, fud-kɔntakt PVC ɛn risaykul PVC gɛt difrɛn fɔmyulashɔn ɛn aplikeshɔn dɛn. Klɛm bɔt fleksibul PVC plastiza nɔ fɔ ɔtomɛtik aplay pan rigid blista shit.

Trit APET, CPET ɛn PETG as Intachɛnjabl

APET na kɔmɔn fɔ yuz fɔ klia thermoformed pak, CPET na injinɛri fɔ ay-tɛmpracha trey, ɛn PETG de gi difrɛn fɔm ɛn siling prɔpati. If yu pik ɔl bay di wɔd 'PET' i kin mek di prɔses nɔ wok ɔ i nɔ kɔrɛkt fɔ risaykul klem.

Assuming a Resin Code Garanti fɔ Risaykul

Wan kɔd fɔ no di rɛsin de sho di men plastic; i nɔ de gi garanti se dɛn gɛda di kɔmplit paket, sɔt am ɛn risaykul am na di pɔsin we bay am in makit.

Fɔ Pik Matirial Nɔmɔ bay Prays fɔ wan Kilogram

Matirial yield, tiknes, fom spid, skrap ret, brek, sil failure en tul kost kin bi mo impotant pas di resin prais difrens.

Fɔ Mek Yunivasal Fɔd-Sefty Klɛm

Fɔd-kɔntakt suitabiliti de bays pan di kɔmplit matirial kɔmpɔzishɔn ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz. Di wan dɛn we de bay fɔ aks fɔ diklareshɔn ɛn tɛst we gɛt fɔ du wit di kayn it we dɛn de it, di tɛmpracha, di tɛm we dɛn de it ɛn di say we dɛn de go na di makit.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PVC vs PET Packaging

Wetin na di men difrɛns bitwin PVC ɛn PET pak?

PVC jɔs de gi fɔgiv fɔm ɛn silin prɔses, izi day kɔt ɛn strɔng RF-wɛldin kapabiliti. PET jɔs de gi nyutral klia, ay trɛnk, brayt it ɛn drink akseptɛns, risaykul-kɔntinɛnt opshɔn ɛn bɛtɛ akses to establish kɔshɔma risaykul sistɛm.

Yu tink se PET bɛtɛ pas PVC ɔltɛm fɔ pak?

Nɔ, bɔku tɛm dɛn kin lɛk PET fɔ klia it pak ɛn risaykul-kɔntinɛnt prɔjek, we PVC kin gi bɛtɛ prɔsesin ɛn silin pefɔmɛns fɔ famasitik blista, rital blista kad ɛn RF-wɛld prodak.

PET klia pas PVC?

APET nכmal fכ gi wan hεli nyutral εn transparent apinεns. Klia rigid PVC kin gi ay klia bak, pan ɔl we sɔm gred dɛn gɛt smɔl blu tint. di akchual apinans dipכnt pan gred, tik, aditiv εn prכsεsin.

PVC shɔt pas PET?

Nɔto insay ɛvri makit ɔ aplikeshɔn. Di prayz fɔ rɛsin kin chenj, ɛn di kɔst fɔ pak di tɔtal kin dipen bak pan di matirial dɛnsiti, tiknɛs, layn spid, skrap, kɔtin, tul ɛn rijɛkt rɛt.

Yu tink se dɛn kin yuz PVC fɔ pak it?

Spɛsifi k PVC fɔmyulashɔn dɛn kin yuz fɔ ɔtorizayt it-kɔntakt aplikeshɔn dɛn. Di wan dɛn we de bay fɔ chɛk di rɛsin, di stebyulayza, aditiv, di maykreshɔn rikwaymɛnt ɛn di kɔndishɔn dɛn we dɛn alaw fɔ yuz pas fɔ abop pan di wɔd PVC nɔmɔ.

Yu tink se PET it sef?

PET na tin we dɛn kin yuz bɔku bɔku wan fɔ pak it ɛn drink, bɔt di patikyula matirial gred ɛn kɔmplit pak fɔ fala di rigyuleshɔn fɔ di it, tɛmpracha ɛn di tɛm we dɛn fɔ kɔntakt. Risaykul PET nid fɔ gɛt ɔda traysabiliti ɛn prɔses kɔntrol.

Yu tink se dɛn dɔn plasticiz rigid PVC?

Rigid PVC pak sheet kin gɛt smɔl ɔ nɔ gɛt ɛni plasticizer. Fleksibul PVC film dɛn gɛt plasticizers fɔ mek dɛn soft. Di tu matirial kategori dεm nכ fכ trit lεk se dεn gεt di sem fכmyuleshכn.

Us matirial bɛtɛ fɔ famasi blista pak?

Rigid PVC stil de kɔmɔn bikɔs ɔf in thermoforming, push-through ɛn heat-sealing pefɔmɛns. PET-based ɔltɛrnativ dɛn kin tink bɔt fɔ spɛshal prɔjek dɛm, bɔt baria, sil intɛgriti, fɔm ɛn prodak-stability rikwaymɛnt dɛn fɔ rivalidet.

Us matirial bɛtɛ fɔ mek klia it trey?

APET ɔ RPET na tin we dɛn kin lɛk fɔ klia chill-fud trey bikɔs i tan lɛk, i strɔng ɛn i kin aksept di it-pak. Ɔt-rɛsistɛns aplikeshɔn dɛn kin nid CPET, PP ɔ ɔda spɛshal strɔkchɔ.

PET kin riples PVC insay blista pak?

I kin bi se i pɔsibul, bɔt di kɔnvɛnshɔn nɔmal wan nid fɔ tray fɔ prodyuz ɛn ajɔst to di kɔndishɔn fɔ ɔt, fɔm, trim, kɔt ɛn sial. Famasiutik aplikeshɔn dɛn bak nid fɔ gɛt pakej ɛn stebiliti rivalidɛshɔn.

Yu tink se PET izi fɔ risaykul pas PVC?

PET jɔs gɛt mɔ establish kɔlɛkshɔn ɛn risaykul sistɛm, mɔ fɔ bɔtul dɛn. Bɔt dɛn nɔ de tek PET trey ɛn klamshɛl ɔlsay, ɛn di dizayn we dɛn mek fɔ di paket fɔ kɔmpit wit di risaykul we gɛt fɔ du wit am.

Yu tink se dɛn kin risaykul PETG wit PET?

PETG nɔ fɔ de ɔtomɛtik wan na di standad PET risaykul strim. I difrɛn kristalizashɔn ɛn mɛlt bihayvya kin mek prɔblɛm wit prɔsesin, so dɛn fɔ chɛk lokal risaykul ɛn dizayn-fɔ-risaykul gayd.

Us matirial bɛtɛ fɔ RF silin?

PVC na jɔs fayn fayn wan fɔ RF silin. PETG kin bi bak we dɛn kin tink bɔt fɔ sɔm RF-sial aplikeshɔn dɛn, we standad APET nɔ kin bi di fɔs matirial we dɛn kin pik fɔ dis prɔses.

Us tiknes de fɔ PVC ɛn PET pak sheet?

Dɛn tu tin ya de insay bɔku bɔku tik dɛn. Di kɔrɛkt tiknɛs dipen pan di paket dimɛnshɔn, fɔm dip, prodak wet, impak rikwaymɛnt, stak lod, siling prɔses ɛn target matirial ridyushɔn.

Us dɔkyumɛnt dɛn di wan dɛn we de bay fɔ aks fɔ?

Di wan dɛn we de bay fɔ aks fɔ tɛknikal data shit, sefty data shit, sɛtifiket fɔ analisis, kɔmpɔzishɔn ɔ risaykul-kɔntinɛnt diklareshɔn, it-kɔntakt dɔkyumentri usay i apɔynt ɛn ɛni ristrikt-sɔbstans tɛst ripɔt we dɛn nid.

PVC ɛn PET Pakɛj Matirial frɔm HSQY Plastik

HSQY Plastic Group de saplae rigid PVC ɛn PET shit matirial fɔ thermoforming, printin, day kɔt, blista pak, it trey, klia bɔks ɛn ɔda pak aplikeshɔn dɛn.

Di wan dɛn we de bay kin rivyu HSQY dɛn PVC sheet matirial dɛn , inklud rigid PVC sheet , ɔ fɛn ɔltin PET sheet fɔ pak.

Di opshɔn dɛn we de kin inklud difrɛn tik, waid, rol saiz, kɔlɔ, sɔfays finish, risaykul-kɔntinɛnt strɔkchɔ ɛn kɔstɔmayz spɛsifikɛshɔn. Di matirial rɛkɛmɔndeshɔn fɔ bi bay di fɔm mashin, fayn paket dizayn, siling sistɛm ɛn rigyuletɔri rikwaymɛnt.

Dɔn

PVC ɛn PET na ɔl tu fayn fayn tin dɛn fɔ pak, bɔt dɛn de sɔlv difrɛn tɛknikal ɛn kɔmɛshɔn prɔblɛm dɛn. Rigid PVC de gi rili thermoforming, brayt ɔt-sil kɔmpatibiliti, izi day kɔt ɛn RF-wɛldin pefɔmɛns. PET de gi ay klia, trɛnk, fud-pak akseptans, risaykul-kɔntinɛnt opshɔn ɛn wayda rɛkɔgnishɔn insay kɔshɔma risaykul sistɛm.

Bɔku tɛm na PET na di tin we dɛn kin pik fɔ klia it trey, drink kɔntena ɛn rital pak. PVC stil rili impɔtant fɔ famasitik blista, mɛdikal pak, ɔt-sial blista kad ɛn aplikeshɔn dɛn we dɛn bil rawnd di PVC kɔnvɔtin ikwipmɛnt we de naw.

Di fainal disizhɔn fɔ bi bay di ɛksaktɔl matirial gred, pakej jɔyometri, tɛmɔfɔmin prɔses, siling we, barɛri target, kɔmplians dɔkyumɛnt, lokal risaykul infrastukchɔ ɛn totɛl pakej kɔst pas fɔ simpul klem se wan polima yunivasal bɛtɛ.