PVC vs PET: Nu kae nyo wu na nubablɛwo?

PVC vs PET Packaging: Nu kae nyo wu?

PVC kple PET nye dzoxɔxɔnu eve siwo wozãna geɖe hena nubablɛ sesẽwo, agba siwo wotsɔ dzoxɔxɔ wɔe, blister packs, clamshells, aɖaka siwo woate ŋu abla kple ametakpɔnu ƒe bablawo. Togbɔ be PVC gbadzɛ sesẽ si me kɔ kple PET agbalẽ ate ŋu aɖi wo nɔewo hã la, woto vovo le dzoxɔxɔ ƒe nɔnɔme, dzoxɔxɔ ƒe nutrenu, ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ, gbugbɔgazã ƒe ɖekawɔwɔ, ɖoɖowɔwɔ ƒe nɔƒe kple nuwuwu zazã siwo sɔ me.

Nukae Nye PVC Nubablɛwo?

PVC tsi tre ɖi na polyvinyl chloride. Enye dzoxɔxɔnu si woate ŋu azã le mɔ vovovowo nu si woate ŋu awɔ abe agbalẽ sesẽ alo film si te ŋu trɔna ene to asitɔtrɔ le eƒe wɔwɔme kple eƒe kpeɖeŋutɔ ƒe ɖoɖo ŋu me.

Zi geɖe la, plasticizer sue aɖe koe nɔa PVC sesẽ si wozãna na blister packs, clamshells kple thermoformed packaging me. Mele be woatɔtɔe kple PVC film si te ŋu trɔna bɔbɔe, si me plasticizers le be wòana wòafa eye wòate ŋu atrɔ ɖe nɔnɔmewo ŋu o.

Wodea asixɔxɔ PVC sesẽ ŋu le eƒe wɔwɔme ƒe ɖekawɔwɔ, didime ƒe liƒo, atikewo ƒe tsitretsitsi, agbalẽtata, ku-lãɖeɖe ƒe dɔwɔwɔ kple ɖekawɔwɔ kple dzoxɔxɔ-nutrenu ƒe nutsyɔnu kple nulénu vovovowo ta.

PVC Packaging Dɔwɔwɔ Siwo Bɔ

• Atikewo ƒe tablet kple capsule blister packs

• Atikewɔnuwo ƒe bablawo kple agba siwo wotsɔ dzoxɔxɔ wɔe

• Asitsaƒe ƒe blister packaging kple clamshells

• Hardware, agbalẽŋlɔnuwo kple elektrɔnik kpeɖeŋutɔ ƒe bablawo

• Aɖaka siwo woate ŋu abla kple plastik-kakɛ siwo wota siwo me kɔ

• RF-welded packaging kple vinyl nusiwo te ŋu trɔna bɔbɔe

• PVC shrink film kple tamper-dze ƒã abɔta dɔwɔwɔwo

Nukae Nye PET ƒe Nubablɛwo?

PET tsi tre ɖi na polyethylene terephthalate. Enye polyester thermoplastic si wonya ɖe eƒe eme kɔ, ŋusẽ, sesẽ, didime li ke eye wòsɔ na nuɖuɖu, nunono kple nuƒlelawo ƒe nubablɛ geɖe.

Nya PET-nubablɛ ate ŋu afia nu geɖe siwo do ƒome kplii. Ele be woade dzesi dzesi si sɔ hafi atsɔ PET asɔ kple PVC elabena APET, RPET, CPET kple PETG ƒe dɔwɔwɔ kple dɔwɔwɔ ƒe nɔnɔmewo to vovo.

APET ƒe nya

APET gɔmee nye polyethylene terephthalate si me nɔnɔme mele o. Wozãnɛ zi geɖe na agba siwo me kɔ siwo wotsɔ dzoxɔxɔ wɔe, nutsyɔnuwo, lãgbalẽgolowo, atikutsetsewo ƒe nugoewo, abolomeƒe ƒe bablawo, atsyɔ̃ɖonuwo ƒe bablawo kple asitsaƒewo ƒe ɖeɖefia ƒe agbawo.

RPET ƒe ŋkɔ

RPET nye PET si me nusiwo wogbugbɔ zã. Ate ŋu anye nusiwo wogbugbɔ zã le nuzazã megbe alo le dɔwɔƒewo megbe. Nusiwo wogbugbɔ zã ƒe agbɔsɔsɔme kple wo ɖoɖo nɔ te ɖe agbalẽa ƒe wɔwɔme, dzedzeme ƒe nudidiwo kple nuɖuɖu ƒe kadodo ŋuti se siwo li dzi.

CPET ƒe dɔwɔwɔ

CPET nye kristalo PET si wowɔ na dzoxɔxɔ si lolo wu zazã abe nufamɔ̃-to-oven-nuɖuɖudzraɖoƒewo ene. Mele be woabui be dzoxɔxɔ ƒe dɔwɔwɔ sɔ kple APET agbalẽ si me kɔ si wozãna ɖaa o.

PETG

PETG nye PET si wotsɔ glycol trɔ asi le. Enaa eme kɔ nyuie ŋutɔ, sesẽme, wɔwɔme ƒe dɔwɔwɔ kple kadodo ƒe tiatiawɔblɔɖe. Wozãa PETG le atikewɔwɔ ƒe bablawo, aɖaka siwo me kɔ, nukpɔkpɔwo kple dɔwɔwɔ siwo hiã be woawɔe bɔbɔe wu alo RF nutrenu me. Gake mele be woabu PETG le eɖokui si be esɔ kple PET si wozãna ɖaa le mɔ̃ɖaŋunuwo gbugbɔgazã ƒe ɖoɖowo me o.

PVC vs PET Packaging tsɔtsɔ sɔ kple wo nɔewo

Tabla si gbɔna la tsɔ PVC ƒe nubablɛ sesẽwo sɔ kple APET ƒe nubablɛ si me kɔ si wozãna ɖaa. Dzeside tɔxɛwo, nusiwo wotsɔ blaa nu, xɔtunu siwo le ƒuƒoƒo geɖe me kple nusiwo wotsɔ kpe ɖe eŋu ate ŋu atrɔ nu eveawo dometɔ ɖesiaɖe ƒe dɔwɔwɔ.

Ðe PET Kpɔa Nu Gbagbe Wu PVC?

Woate ŋu awɔ PVC sesẽ kple APET siaa kple nusiwo me kɔ ŋutɔ. Mesɔ be woagblɔ be PVC sɔ na nubablɛ siwo womeɖena fiana o ko.

Zi geɖe la, wotiaa APET na asitsatsa kple nuɖuɖu ƒe babla nyuitɔwo elabena ate ŋu ana wòadze abe ɖe wòle abe ahuhɔ̃e ene si medea akpa aɖeke dzi o eye wòakpɔ adzɔnuwo nyuie. PVC si me kɔ ate ŋu aɖe gbeɖiɖi blɔ vie afia, gake PVC gbadzɛ sesẽ si ƒe nyonyome deŋgɔ ate ŋu ana atikewo ƒe ʋuʋudediwo, aɖaka siwo me kɔ kple asitsaƒewo ƒe lãgbalẽgolowo nadze nyuie kokoko.

Mlɔeba me kɔ nɔ te ɖe resin ƒe nyonyome, nusiwo wogbugbɔ zã, agbalẽ ƒe titrime, anyigba ƒe nuwuwu, extrusion dziɖuɖu, additives kple thermoforming nɔnɔmewo tsɔ wu polymer ŋkɔ ɖeɖeko.

PVC vs PET Dzoxɔxɔ ƒe Dɔwɔwɔ

PVC Dzoxɔxɔ ƒe Nɔnɔmewɔwɔ

Wozãa PVC sesẽ geɖe le dzoxɔxɔ ƒe wɔwɔme me elabena efa abe alesi woate ŋu agblɔe ɖi ene, ewɔa do siwo me kɔ tsitotsito eye zi geɖe la, enaa dɔwɔwɔ ƒe fesre si tsɔa ke. Ate ŋu asɔ na deep-draw blister cavities, nɔnɔme sesẽwo kple dɔwɔwɔ siwo hiã denesting kakaɖedzitɔe.

PVC ƒe dɔwɔwɔ ƒe nuwɔna ate ŋu akpe ɖe eŋu be wòaɖe tɔtrɔ tso agbalẽvi ƒe nɔnɔme ɖeka dzi ayi bubu me ƒe sesẽ dzi akpɔtɔ. Gake dzoxɔxɔ dzi kpɔkpɔ gakpɔtɔ le vevie elabena dzoxɔxɔ si gbɔ eme ate ŋu ana amadede natrɔ, agblẽ nu alo atrɔ asi le dzudzɔ ŋu.

PET Dzoxɔxɔ ƒe Nɔnɔmewɔwɔ

APET naa akpa sesẽ siwo wotsɔ dzoxɔxɔ wɔe siwo me kɔ ŋutɔ eye woƒe sesẽme nyo. Wozãnɛ zi geɖe na nuɖuɖugoewo, clamshells, cake domes, nutsyɔnuwo kple asitsaƒewo ƒe agbawo.

PET dɔwɔwɔ ate ŋu abia be woakpɔ agbalẽ ƒe dzoxɔxɔ, aŋɔ ƒe dzoxɔxɔ, wɔwɔme ƒe sɔsɔme kple fafa ƒe nɔnɔmewo dzi nyuie wu. Dzoxɔxɔ si gbɔ eme ateŋu ana kristalo nazu, afu alo awɔe ƒe nyonyome dzi naɖe akpɔtɔ. Ðewohĩ ahiã be woatrɔ asi le dɔwɔnuwo kple lãɖeɖe ƒe nɔnɔmewo hã ŋu ne wole tɔtrɔm tso PVC dzi va zu PET.

Ðe PET ate ŋu Axɔ Ðe PVC teƒe le Dzoxɔxɔ ƒe Dɔwɔnu Siwo Li Fifia Dzia?

Woate ŋu awɔ dɔ tso PET ŋu le dzoxɔxɔ ƒe ka geɖe siwo wozã gbã na PVC dzi, gake mele be woabui be enye nusi wotsɔ ɖɔa li wo ɖokui si wotsɔna ƒua gbe ɖe eme o. Dzoxɔxɔ ƒe nɔnɔmetatawo, wɔwɔme ƒe dzoxɔxɔ, plug-assist design, fafaɣi, trim tooling kple stacking nuwɔna ate ŋu abia tɔtrɔ.

Ele be ewɔwɔ dodokpɔwo nada gli-titrime mama, dzogoe ƒe gɔmesese, flange gbadzaa, gaglãgbe, ŋusẽkpɔɖeamedzi tsitretsitsi, trimming nyonyome kple fli ƒe duƒuƒu kpɔ hafi asitsanuwo ƒe tɔtrɔ.

PVC vs PET Dzoxɔxɔ Nutrenu kple RF Welding

Dzoxɔxɔ-Seal ƒe Ðekawɔwɔ

Zi geɖe la, wotiaa PVC sesẽ na blister-card ƒe babla elabena ewɔa dɔ kple dzoxɔxɔ-nutrenu ƒe nu vovovowo. Esia ate ŋu ana dɔwɔwɔ ƒe fesre gbadza kple nutrenu ƒe dɔwɔwɔ si li ke le blister packaging lines siwo woɖo anyi dzi.

Zi geɖe la, PET si wozãna ɖaa hiãa nutsyɔnu, nusi léna ɖe nu ŋu, nutrenu si wotsɔ laminated nutrenu alo nutsyɔnu film si sɔ. Nutrenu ƒe dɔwɔwɔ nɔ te ɖe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi, anyigba dzi dɔwɔwɔ, flange ƒe dzadzɛnyenye kple nutsyɔnu ƒe ɖoɖo si wotia dzi.

Radio-Frequency Welding ƒe dɔwɔwɔ

PVC wɔa nu nyuie ɖe radio-frequency welding ŋu eye wozãnɛ geɖe na kotoku siwo wotsɔ ga ƒo, atikekotokuwo, nusiwo woate ŋu atsɔ ya aƒoe kple agbalẽvi aɖewo siwo me kɔ.

Zi geɖe la, APET si wozãna ɖaa mesɔ na RF welding o. Ne dɔ aɖe bia be PET-ƒomea me nakɔ kpe ɖe RF nutrenu ŋu la, woate ŋu abu PETG alo xɔtuɖoɖo si ŋu wotrɔ asi le etɔxɛe ŋu ahadoe kpɔ.

PVC vs PET Mɔxenu ƒe Dɔwɔwɔ

Ele be woada mɔxenu ƒe dɔwɔwɔ kpɔ le alesi atike la sea veve ŋutɔŋutɔ ɖe tsi, ɔksidzin, ʋeʋẽ lilili, kekeli, ami kple atikewo ƒe kadodo ŋu nu. PVC veviwo alo APET menaa mɔxenu nyuitɔ kekeake na adzɔnu ɖesiaɖe o.

Atikewo ƒe Blister Mɔxenu

PVC sesẽ nye nyatakakadzraɖoƒe si bɔ si wɔa atikewo ƒe ʋuʋudediwo elabena ewɔna bɔbɔe eye wòdoa alɔ ʋuʋudedi ƒe nɔnɔme siwo woate ŋu atutu to eme. Basic PVC ƒe dɔwɔwɔ seɖoƒe li na tsidzadza-mɔxenu na atike siwo sea veve ŋutɔ.

Eyata atikewo ƒe bablawo ateŋu azã PVC si wotsɔ PVDC fa, PVC si wotsɔ PCTFE ƒo xlãe, film siwo wotsɔ ƒo ƒui alo aluminum-based cold-form structures ne ehiã be woakpɔ tsi kple oxygen takpɔkpɔ sesẽ wu.

Nuɖuɖu ƒe Nubablɛ ƒe Mɔxenu

APET naa gas kple ʋeʋẽ ƒe mɔxenu ƒe nɔnɔme nyuiwo na nuɖuɖu geɖe siwo wofa, abolomenuwo, nusiwo wowɔ kple nuzazãwo. Gake nuɖuɖu siwo nɔa anyi didi, lã yeye, yamenutome ƒe nubablɛ siwo ŋu wotrɔ asi le kple nusiwo me oxygen sea nu le ate ŋu abia PET/PE, PET/EVOH/PE alo mɔxenu bubu si le ƒuƒoƒo geɖe me.

Ele be woazã agba si wowɔ vɔ, nutsyɔnu film, nutrenu, nuɖuɖu, nudzraɖoƒe ƒe dzoxɔxɔ kple gas tsakatsaka atsɔ aɖo kpe eƒe agbenɔƒe dzi. Nuwo ƒe ŋkɔwo ɖeɖe mate ŋu agblɔ asitsatsa ƒe agbenɔƒe si woatsɔ adzrae ɖi o.

PVC vs PET na Nuɖuɖu ƒe Nubablɛwo

Wozãa PET geɖe le nuɖuɖu kple nunono ƒe bablawo me le eƒe eme kɔ, ŋusẽ, eƒe kpekpeme le bɔbɔe, eƒe anyinɔnɔ le nusiwo wogbugbɔ zã ƒe hatsotsowo me kple eŋudɔwɔwɔ si woɖo anyi le aŋetuwo kple nugoe siwo wotsɔ dzoxɔxɔ wɔe me ta.

Dɔwɔwɔ siwo sɔ dometɔ aɖewoe nye atikutsetsewo ƒe agbawo, salad-gowo, abolomeɖakawo, deli-gbawo, keke dome, nutsyɔnu siwo me kɔ, ahanono ƒe aŋetuwo kple nu bubu siwo wotsɔ de fridzi alo esiwo wotsɔ ƒo xlãe.

Woateŋu azã PVC sesẽ hã na nuɖuɖu ƒe kadodo tɔxɛwo ƒe bablawo ne aŋɔ, nusiwo naa nu li ke, nusiwo wotsɔ kpe ɖe eŋu kple eƒe wɔwɔme bliboa wɔ ɖeka kple se siwo ku ɖe nuɖuɖu si woɖo be woazã kple nɔnɔme siwo me woazãe le. Eyata mesɔ be woagblɔ be PVC katã mesɔ na nuɖuɖu ƒe kadodo o.

Ke hã, nuɖuɖu ƒe adzɔha kple nudzrala geɖe lɔ̃a PET le esi woxɔe le asi me, nusiwo wogbugbɔ zã ƒe amesinɔnɔ kple alesi wòsɔ kple nubablɛ ƒe mɔnu siwo ŋu wotsia dzi ɖo le PET dzi ta.

PVC vs PET na Atikewɔwɔ ƒe Blister Packaging

Nusita Wozãa PVC Zi geɖe

PVC sesẽ gakpɔtɔ nye film si wozãna geɖe tsɔ wɔa atike ƒe tablet kple capsule blisters elabena eƒoa dzoxɔxɔ ƒe nɔnɔme, eme kɔ, do ƒe mumu si dzi wokpɔna, ɖekawɔwɔ kple aluminum push-through foil kple ewɔwɔ ƒe dɔwɔwɔ si woɖo anyi la nu ƒu ɖekae.

Ne Woate Ŋu Abu PET Ŋu

Woateŋu ada APET, PETG kple polyester ƒe xɔtuɖoɖo tɔxɛwo kpɔ ne dɔ aɖe bia be woatsɔ PVC-manɔmee, sesẽme si lolo wu, dɔlékuiwutike ƒe mɔnu bubu alo woawɔ ɖeka kple nu tɔxɛ aɖe ƒe aɖaŋu.

Atikewɔƒe ƒe ʋuʋudedi tɔtrɔ tso PVC dzi va zu PET bia nu geɖe wu agbalẽ si ƒe titrime sɔ kple ema tiatia ko. Ele be woagbugbɔ aɖo kpe wɔwɔme ƒe ɖoɖoa, nutsyɔnu ƒe sɔsɔ, nutrenu ƒe blibonyenye, tsi ƒe mɔxenu, oxygen mɔxenu, liƒo ŋuti nyatakakawo kple ɖoɖowɔɖi ƒe nuŋlɔɖiwo dzi.

PVC vs PET na Asitsaƒe ƒe Ʋuʋudedi kple Clamshells

Tia PVC Ɣekaɣi

• Wotrɔ asi le ka si li fifia ŋu wònyo wu na PVC thermoforming

• Wohiã fesre si keke si wotsɔa dzoxɔxɔ nutrenu ƒoa nui

• RF welding nye nubablɛ ƒe ɖoɖoa ƒe akpa aɖe

• Alesi wowɔe la bia be woatso die bɔbɔe eye woawɔe wòasesẽ

• Nutoa me sewo kple asisiwo ƒe nɔnɔmewo ɖe mɔ ɖe PVC ŋu

Tia PET Ɣekaɣi

• Akpaɖekedzimademade ƒe eme kɔ nyuie kple adzɔnuwo ƒe dzedzeme nye nu vevi siwo wotsɔ ɖo nɔƒe gbãtɔ

• Asisi la biaa PET alo PET me nusiwo wogbugbɔ zã

• Adzɔha la ƒe nubablɛ ƒe aɖaŋu si wotu ɖe PET dzi

• Wohiã ŋusẽ gã kple ŋusẽkpɔɖeamedzi ƒe dɔwɔwɔ

• Wotrɔ asi le agbalẽvi la ŋu na PET nuƒoƒoƒu kple wo gbugbɔgazã ƒe ɖoɖo si li

Viɖewo Kple Seɖoƒe Siwo Le PVC Nubablɛwo Ŋu

Viɖe siwo le Rigid PVC ŋu

• Fesre si keke eye wòtsɔa thermoforming kena

• Vidzidzi tsitotsito nyuie na blister cavities

• Ewɔa dɔ kple dzoxɔxɔ-nutrenu geɖe siwo wotsɔ blaa nu

• Esɔ na RF welding

• Agbalẽtata nyuie, kadodo kple ku-lãɖeɖe ƒe dɔwɔwɔ

• Woate ŋu akpɔe le dzesi siwo me kɔ, amadede, siwo me mekɔ o kple esiwo le etɔxɛ me

• Woɖoe be woazãe le atikewo kple atikewo ƒe bablawo me

Seɖoƒe siwo le Rigid PVC ŋu

• Nuƒlelawo ƒe nuƒoƒoƒu kple wo gbugbɔgazã ƒe mɔnukpɔkpɔ si seɖoƒe li na le nuto geɖe me

• Ate ŋu aƒo ɖi PET gbugbɔgazã ne womeɖo wo ɖe hatsotsowo me nyuie o

• Ebia be woawɔ dɔ tso eŋu le mɔ si dzi wokpɔna nu be woaƒo asa na dzoxɔxɔ ƒe gbegblẽ

• Ate ŋu adze ŋgɔ nudzrala, adzɔnu ƒe dzesi alo asi tɔxɛ ƒe nuzazãwo ƒe mɔxexeɖenu

• PVC veviwo ate ŋu abia be woatsyɔ nu wo dzi hena atikewo ƒe mɔxenu ƒe dɔwɔwɔ si de ŋgɔ wu

• PVC ƒe atike siwo te ŋu trɔna bɔbɔe bia be woakpɔ plasticizer kple additive ƒe sedziwɔwɔ dzi nyuie

Viɖewo Kple Seɖoƒe Siwo Le PET ƒe Nubablɛwo Ŋu

Viɖe siwo le PET ŋu

• Nukpɔkpɔ si me kɔ ŋutɔ kple nukpɔkpɔ ƒe dzedzeme si medea akpa aɖeke dzi o

• Ŋusẽ nyui, sesẽme kple didime ƒe liƒo

• Wozãnɛ le afisiafi hena nuɖuɖu, nunono kple asitsaƒewo ƒe nubablɛwo

• Woate ŋu akpɔe kple nusiwo wogbugbɔ zã le nuzazã megbe

• Nuƒlelawo ƒe nusiwo wogbugbɔ zãna ƒe dzesidede si woɖo anyi wu PVC

• Esɔ na tray, clamshells, nutsyɔnu, aŋetuwo kple aɖaka siwo me kɔ

• Ate ŋu ado alɔ agbalẽgo ƒe wɔwɔme si le bɔbɔe ne wowɔe nyuie

Seɖoƒe siwo le PET ŋu

• Ðewohĩ abia be woakpɔ dzoxɔxɔ dzi nyuie wu le dzoxɔxɔ ƒe nɔnɔme me

• APET si wozãna ɖaa mesɔ na dzodoƒe ƒe dzoxɔxɔ si wozãna ɖaa o

• Zi geɖe la, dzoxɔxɔ ƒe nutrenu bia be woatsɔ nutrenu alo nutrenu si sɔ

• Trim kple die-cut tooling ate ŋu ahiã be woawɔ optimization

• Ðewohĩ PETG kple xɔtunu aɖewo siwo le ƒuƒoƒo geɖe me mawɔ ɖeka kple PET gbugbɔgazã si wozãna ɖaa o

• Womeƒoa PET thermoforms nu ƒu le nutoa me ƒe nuwo gbugbɔgazã ƒe ɖoɖo ɖesiaɖe me o

• Nusiwo wogbugbɔ zã fũ ateŋu akpɔ ŋusẽ ɖe amadede, eme kɔ nyuie kple nuwɔwɔ ƒe ɖekawɔwɔ dzi

Ðe PET Li Eteƒe Didi Wu PVC?

Zi geɖe la, viɖe le PET ŋu le nuƒlelawo ƒe bablawo me elabena wokpɔa PET-tuwo dzea sii le afisiafi eye woƒoa wo nu ƒu, eye asitsatsa ƒe RPET-nuzazãwo ƒe kɔsɔkɔsɔwo tsi ne wotsɔ wo sɔ kple wo nɔewo. PET-nubablɛwo ate ŋu ade nusiwo wogbugbɔ zã le wo zazã megbe hã eme ne woƒe dzedzeme, wo ŋudɔwɔwɔ kple nuɖuɖu ƒe kadodo ƒe nudidiwo ɖe mɔ.

Gake ekeke akpa be woaɖɔ PET-nubabla ɖesiaɖe be megblẽa nu le nutome ŋu o alo woate ŋu agbugbɔ azãe bliboe. Ðewohĩ womaxɔ PET-gbadzɛwo kple lãgbalẽgolowo le afisiafi si woaƒo PET-tuwo nu ƒu le o. Nuŋlɔɖiwo, nusiwo wotsɔna léa nu ɖe ​​nu ŋu, amadede viviwo, mɔxenu ƒe ƒuƒoƒo, absorbent pads kple PETG ƒe akpawo hã ateŋu aɖe nusiwo wogbugbɔ zãna ƒe ɖekawɔwɔ dzi akpɔtɔ.

Woate ŋu agbugbɔ PVC awɔ dɔ le mɔ̃ɖaŋununya me, eye PVC gbugbɔgazã ƒe ɖoɖo tɔxɛwo li. Eƒe seɖoƒe ŋutɔŋutɔe nye be nuƒoƒoƒu, dzesidede kple asi nuwuwu ƒe mɔnukpɔkpɔ mebɔ ɖe nuƒlelawo ƒe agbalẽvi sue geɖewo o.

Ele be nuwo ƒe kpekpeme ƒe dodokpɔ si ŋu gɔmesese le, nusiwo wogbugbɔ zã, nusiwo wobla ɖe wo nɔewo dome ƒe sɔsɔme, nusiwo wowɔ takpɔkpɔ, mɔxexe ɖe nuɖuɖu ƒe gbeɖuɖɔ nu, ʋuɖoɖo nyuie, nutoa me nuƒoƒoƒu ŋutɔŋutɔ kple asi si wogbugbɔ zã ƒe nuwuwu ƒe nyonyome ŋu.

PET Packaging ƒe ɖoɖowɔwɔ hena Gbugbɔgazã

• Zã PET ƒe gɔmeɖoanyi ƒe ɖoɖo si me kɔ ne anya wɔ

• Ðe polymer siwo mewɔ ɖeka o kple akpa siwo le ƒuƒoƒo geɖe me dzi kpɔtɔ

• Tia dzesideŋkɔwo, nuŋlɔtsiwo kple nusiwo wotsɔna léa nu ɖe ​​nu ŋu siwo wowɔ na PET gbugbɔgazã

• Ƒo asa na amadede doviviti si ate ŋu ado kplamatse nuwo ƒe vovototodedeameme

• Trɔ asi le agbalẽvi la ŋu na automated optical kple dimensional sorting

• Kpɔ egbɔ be woxɔ PET thermoforms le asi si ŋu wole taɖodzinu ɖo me hafi nàgblɔ be wogbugbɔ zãe

Ðe PVC alo PET Xɔa Ga Geɖe Wua?

Se aɖeke meli si anɔ anyi ɖaa be PET ƒe asi bɔbɔ wu PVC ɣesiaɣi alo be PVC ye nye nusi wotsɔ blaa nu si ƒe asi bɔbɔ wu ɣesiaɣi o. Resin ƒe asiwo trɔna le dukɔwo nu, ŋusẽ ƒe asixɔxɔ, nusiwo woatsɔ ana ƒe nɔnɔmewo, nusiwo wogbugbɔ zã ƒe nudidiwo kple ɣeyiɣi si woatsɔ adɔe.

Ele be ga si woatsɔ aƒle agbalẽviawo katã nanye:

• Sheet ƒe asi le kilogram ɖeka me

• Nusiwo wotsɔ wɔe ƒe kpekpeme kple akpa siwo wowɔna le kilogram ɖeka me

• Agbalẽa ƒe titrime si hiã

• Thermoforming cycle ɣeyiɣi kple ŋusẽ zazã

• Trim scrap kple le aƒea me regrind hayahaya

• Dɔwɔnuwo kple dɔwɔnuwo ƒe tɔtrɔ

• Dzoxɔxɔ-nutrenu siwo wotsɔ blaa nu, nusiwo wotsɔna léa nu ɖe ​​nu ŋu kple nusiwo wotsɔ tsyɔa nu nu dzi

• Gbegblẽ, gbegbe kple packing-line ƒe dɔwɔwɔ nyuie

• Nusiwo wogbugbɔ zã alo sedziwɔwɔ ƒe nudidiwo

• Nuwɔlawo ƒe agbanɔamedzi didi kple gbeɖuɖɔwo dzi kpɔkpɔ ƒe fewo

Nusi ƒe asi lolo wu kilogram ɖeka ate ŋu ana ga si woxena ɖe nubablɛwo katã me naɖiɖi kokoko ne eɖe mɔ ɖe ga si woatsɔ aɖiɖi woe ŋu, fli ƒe duƒuƒu si lolo wu, nubablɛ siwo gblẽ ʋɛ wu alo adzɔnuwo takpɔkpɔ nyuie wu.

Alesi Nàtia PVC Kple PET Nubablɛwo Dome

Nyatakaka Si Nàna Wò Agbalẽvi Dɔwɔƒe

• Nubablɛ ƒomevi si wowu enu kple nusi wole bablam

• Wobia be agbalẽa ƒe titrime, kekeme kple agbalẽ xatsaxatsa ƒe didime

• Dzedzeme si me kɔ, amadede, matte, frosted alo opaque dzedzeme

• Thermoforming mɔ̃ kple dzoxɔxɔ mɔnu

• Goglome kple do ƒe geometry wɔwɔ

• Dzoxɔxɔ nutrenu, adhesive kadodo alo RF-welding mɔnu

• Nuɖuɖu, atikewo, atikewɔwɔ alo dɔwɔƒewo ƒe kadodo ƒe nudidiwo

• Mɔxenu si hiã kple eƒe agbenɔƒe si woatsɔ adzrae ɖo

• Ðetugbui leaƒe alo nusiwo wogbugbɔ zã ƒe nudidiwo

• Dukɔ si me woayi kple asisiwo ƒe nɔnɔmewo

• Ɣleti sia ɣleti alo ƒe sia ƒe ƒe nudɔdɔ ƒe agbɔsɔsɔme

Vodada Siwo Bɔ Ne Wotsɔ PVC Kple PET Sɔ Kple Wo Nɔewo

PVC ƒe Atike Ðesiaɖe Ŋuti Nuwɔwɔ Ðekae

Rigid unplasticized PVC, flexible plasticized PVC, atike PVC, nuɖuɖu-kadodo PVC kple gbugbɔgawɔ PVC ƒe wɔwɔme kple dɔwɔwɔ to vovo. Mele be woatsɔ nya siwo wogblɔna tso PVC plasticizers siwo te ŋu trɔna bɔbɔe ŋu la ade blister sheet sesẽwo dzi le wo ɖokui si o.

Nuwɔwɔ ɖe APET, CPET kple PETG ŋu be wonye esiwo woate ŋu atrɔ ɖe wo nɔewo ŋu

Wozãa APET zi geɖe hena dzoxɔxɔ ƒe nubablɛ siwo me kɔ, wotrɔ asi le CPET ŋu na agba siwo ƒe dzoxɔxɔ lolo wu, eye PETG naa wɔwɔme kple nutrenu ƒe nɔnɔme vovovowo. Tiatia to nya 'PET' ko dzi ateŋu ahe dɔwɔwɔ ƒe kpododonu alo gbugbɔgazã ƒe nya siwo mesɔ o vɛ.

Ne míetsɔe be Resin ƒe Se aɖe Ka Ðe Edzi be Woagazã Nuwo Ake

Resin ƒe dzesidegbalẽvi aɖe dea dzesi plastic vevitɔ; meka ɖe edzi be woƒo agbalẽvi bliboa nu ƒu, ƒo wo nu ƒu eye wogbugbɔ zãe le nuƒlela ƒe asi me o.

Nusiwo Wozãna Tiatia Le Kilogram Ðeka ƒe Asixɔxɔ Ko Nu

Nusiwo wotsɔ wɔa nu ƒe kutsetse, woƒe titrime, wɔwɔ ƒe duƒuƒu, nusiwo gblẽ ƒe agbɔsɔsɔme, gbagbã, nutrenu ƒe kpododonu kple dɔwɔnu ƒe gazazã ate ŋu anɔ vevie wu aŋɔ ƒe asi ƒe vovototo.

Xexeame Katã ƒe Nuɖuɖu-Dedienɔnɔ Ŋuti Nyawo Gbɔgblɔ

Nuɖuɖu ƒe kadodo ƒe nyonyo nɔ te ɖe nusiwo wotsɔ wɔe bliboa kple nɔnɔme siwo woɖo be woazã dzi. Ele be nuƒlelawo nabia gbeƒãɖeɖewo kple dodokpɔ siwo sɔ ɖe woƒe nuɖuɖu ƒomevi, dzoxɔxɔ, ɣeyiɣi didime kple asi si me woayi.

Nya Siwo Wobiaa Enuenu Tso PVC vs PET Packaging Ŋu

Vovototo vevitɔ kae le PVC kple PET ƒe agbawo dome?

PVC zi geɖe naa tsɔtsɔke wɔwɔ kple nutrenu ƒe ɖoɖo, ku lãɖeɖe bɔbɔe kple sesẽ RF-welding ŋutete. Zi geɖe la, PET naa nusiwo me kɔ si medea akpa aɖeke dzi o, ŋusẽ si lolo, nuɖuɖu kple nunono ƒe lɔlɔ̃ ɖe edzi le mɔ gbadza nu, nusiwo wogbugbɔ zã ƒe tiatia kple nuƒlelawo ƒe nusiwo wogbugbɔ zãna ƒe ɖoɖo siwo woɖo anyi ƒe mɔnukpɔkpɔ nyuitɔ.

Ðe PET nyona wu PVC ɣesiaɣi na nubablɛwoa?

Ao, zi geɖe la, wolɔ̃a PET na nuɖuɖu babla siwo me kɔ kple nusiwo wogbugbɔ zã ƒe dɔwo, esime PVC ate ŋu ana dɔwɔwɔ kple nutrenu ƒe dɔwɔwɔ nyuie wu na atikewo ƒe ʋuʋudedi, asitsaƒewo ƒe ʋuʋudedi gbalẽviwo kple nusiwo wotsɔ RF-welded wɔ.

Ðe PET me kɔ wu PVC?

Zi geɖe la, APET naa dzedzeme si medea akpa aɖeke dzi kura o eye wòdzena le gaglãgbe. PVC sesẽ si me kɔ hã ate ŋu ana eme nakɔ ŋutɔ, togbɔ be amadede blɔ vie le hatsotso aɖewo ŋu hã. Dzedzeme ŋutɔŋutɔ nɔ te ɖe grade, titrime, nusiwo wotsɔ kpe ɖe eŋu kple dɔwɔwɔ dzi.

Ðe PVC ƒe asi bɔbɔ wu PET?

Menye le asi alo dɔdamɔnu ɖesiaɖe me o. Resin ƒe asiwo trɔna, eye ga si woatsɔ abla nuawo katã hã nɔ te ɖe nusiwo wotsɔ wɔe ƒe kpekpeme, eƒe titrime, ka ƒe duƒuƒu, kakɛ, nusiwo wotsɔ blae, dɔwɔnuwo kple gbegbe ƒe agbɔsɔsɔme dzi.

Ðe woate ŋu azã PVC atsɔ abla nuɖuɖua?

Woate ŋu azã PVC ƒe atike tɔxɛwo na nuɖuɖu siwo ŋu woɖe mɔ ɖo. Ele be nuƒlelawo naɖo kpe resin, stabilizers, additives, ʋuʋu ƒe nudidiwo kple nɔnɔme siwo ŋu woɖe mɔ ɖo be woazãe dzi tsɔ wu be woaɖo ŋu ɖe nya PVC ɖeɖeko ŋu.

Ðe PET nuɖuɖu le dediea?

Wozãa PET geɖe le nuɖuɖu kple nunono ƒe bablawo me, gake ele be nusi wotsɔ wɔe ƒe hatsotso tɔxɛ kple nusi wotsɔ blae bliboa nawɔ ɖe ɖoɖo siwo ku ɖe nuɖuɖu, dzoxɔxɔ kple ɣeyiɣi didi si woatsɔ aƒo woe ŋu dzi. PET si wogbugbɔ zã la bia be woate ŋu akpɔ wo yome eye woakpɔ dɔwɔwɔ dzi.

Ðe wotsɔ plastic wɔ PVC sesẽa?

Zi geɖe la, plasticizer sue aɖe koe nɔa PVC-nubablɛ sesẽwo me. Plasticizers le PVC film siwo te ŋu trɔna bɔbɔe me be wòana woafa. Mele be woabu nusiwo wotsɔ wɔe ƒe hatsotso eveawo be woƒe atikewo sɔ o.

Nu kae nyo wu na atikewo ƒe ʋuʋudedi ƒe agbawo?

PVC sesẽ gakpɔtɔ bɔ le eƒe thermoforming, push-through kple heat-sealing dɔwɔwɔ ta. Woate ŋu abu mɔnu bubu siwo wotu ɖe PET dzi ŋu na dɔ tɔxɛwo, gake ele be woagbugbɔ aɖo kpe mɔxenu, nutrenu ƒe blibonyenye, wɔwɔme kple nusiwo wowɔ ƒe liƒo ƒe nudidiwo dzi.

Nu kae nyo wu na nuɖuɖugoe siwo me kɔ?

Zi geɖe la, wolɔ̃a APET alo RPET na nuɖuɖu fafɛ ƒe agba siwo me kɔ le eƒe dzedzeme, ŋusẽ kple nuɖuɖu-babla ƒe lɔlɔ̃ ɖe edzi ta. Dzoxɔxɔ-tsitretsitsi ƒe dɔwɔwɔ ate ŋu abia CPET, PP alo xɔtuɖoɖo tɔxɛ bubu.

Ðe PET ate ŋu axɔ ɖe PVC teƒe le blister-nubablɛwo mea?

Ate ŋu adzɔ, gake zi geɖe la, tɔtrɔa bia be woado ewɔwɔ kpɔ eye woawɔ asitɔtrɔ le dzoxɔxɔ, nuwɔwɔ, lãɖeɖe, nutsyɔtsyɔ kple nutrenu ƒe nɔnɔmewo ŋu. Atikewɔwɔ ƒe dɔwɔwɔ hã hiã be woagbugbɔ aɖo kpe nusiwo wotsɔ blae kple woƒe liƒo dzi.

Ðe PET gbugbɔgazã le bɔbɔe wu PVC?

Zi geɖe la, nuƒoƒoƒu kple wo gbugbɔgazã ƒe ɖoɖo siwo woɖo anyi wu le PET si, vevietɔ na aŋetuwo. Gake womexɔa PET-gbadzɛwo kple lãgbalẽgolowo le afisiafi o, eye ele be alesi woawɔ agbalẽviawoe nasɔ ɖe nusiwo wogbugbɔ zãna ƒe ɖoɖo si sɔ nu.

Ðe woate ŋu agbugbɔ PETG awɔ dɔe kple PETa?

Mele be woatsɔ PETG ade PET gbugbɔgazã ƒe tɔsisi si wozãna ɖaa me le eɖokui si o. Eƒe kristalowɔwɔ kple eƒe ʋeʋẽ ƒe nɔnɔme vovovo ate ŋu ahe dɔwɔwɔ ƒe kuxiwo vɛ, eyata ele be woalé ŋku ɖe nutoa me nuwo gbugbɔgazã kple aɖaŋu-na-gbugbɔgazã ƒe mɔfiamewo ŋu.

Nu kae nyo wu na RF nutrenu?

Zi geɖe la, PVC sɔ nyuie na RF nutrenu. Woate ŋu abu PETG hã ŋu na dɔ aɖewo siwo wotre ɖe RF nu, evɔ zi geɖe la, APET si wozãna ɖaa ya menyea nu gbãtɔ si wotia na dɔwɔwɔ sia o.

Nukae ƒe titrime li na PVC kple PET ƒe nubablɛ ƒe agbalẽ?

Woate ŋu akpɔ nu eveawo siaa le woƒe titrime vovovowo me. Titrime nyuitɔ nɔ te ɖe package ƒe didime, wɔwɔme ƒe goglome, nusi wowɔ ƒe kpekpeme, ŋusẽkpɔɖeamedzi ƒe nudidiwo, stacking agba, nutrenu ƒe ɖoɖo kple taɖodzinu nu dzi ɖeɖe kpɔtɔ dzi.

Nuŋlɔɖi kawoe wòle be nuƒlelawo nabia?

Ele be nuƒlelawo nabia mɔ̃ɖaŋununya ŋuti nyatakaka gbalẽvi, dedienɔnɔ ŋuti nyatakaka gbalẽvi, numekuku ƒe ɖaseɖigbalẽ, nusiwo wowɔ alo nusiwo wogbugbɔ zã ƒe gbeƒãɖeɖe, nuɖuɖu ƒe kadodo ŋuti nuŋlɔɖiwo le afisi wòsɔ le kple atike siwo ŋu seɖoƒe le dodokpɔ ŋuti nyatakaka ɖesiaɖe si hiã.

PVC kple PET Nubablɛwo tso HSQY Plastic

HSQY Plastic Group naa PVC kple PET agbalẽvi ƒe nu sesẽwo hena dzoxɔxɔ ƒe wɔwɔme, agbalẽtata, ku lãɖeɖe, blister ƒe babla, nuɖuɖu ƒe agbawo, aɖaka siwo me kɔ kple nubablɛ bubuwo wɔwɔ.

Nuƒlelawo ate ŋu ato HSQY ƒe nyawo me PVC agbalẽ ƒe nuzazãwo , siwo dometɔ aɖewoe nye rigid PVC sheet , alo ku nu me PET agbalẽ si wotsɔ blaa nu.

Tiatia siwo li ate ŋu anye titrime vovovowo, kekeme, agbalẽ xatsaxatsa ƒe lolome, amadedewo, eƒe gowo ƒe nuwuwu, nusiwo wogbugbɔ zã ƒe xɔtuɖoɖowo kple nɔnɔme siwo wowɔ ɖe ɖoɖo nu. Ele be woatu nuwo ƒe aɖaŋuɖoɖowo ɖe mɔ̃ si wotsɔ wɔa nu, agbalẽvi mamlɛtɔ ƒe nɔnɔme, nutrenu ƒe ɖoɖo kple se ƒe nudidiwo dzi.

Nyanuwuwuw

PVC kple PET siaa nye nusiwo wotsɔ blaa nu nyuie, gake wokpɔa mɔ̃ɖaŋununya kple asitsatsa ƒe kuxi vovovowo gbɔ. Rigid PVC na kakaɖedzi thermoforming, keke dzoxɔxɔ-nutrenu sɔsɔ, bɔbɔe ku lãɖeɖe kple RF-welding dɔwɔwɔ. PET naa eme kɔ ŋutɔ, ŋusẽ, lɔlɔ̃ ɖe nuɖuɖu-bablawo dzi, nusiwo wogbugbɔ zã ƒe tiatia kple dzesidede si keke ta wu le nuƒlelawo ƒe nusiwo wogbugbɔ zãna ƒe ɖoɖowo me.

Zi geɖe la, PET ye nyea tiatia si wodina wu na nuɖuɖugo siwo me kɔ, ahanono ƒe nugoewo kple asitsaƒewo ƒe nubablɛwo. PVC gakpɔtɔ le vevie ŋutɔ na atikewo ƒe ʋuʋudediwo, atikewo ƒe bablawo, ʋuʋudedi gbalẽvi siwo wotsɔ dzoxɔxɔ tu kple dɔwɔwɔ siwo wotu ƒo xlã PVC tɔtrɔ dɔwɔnu siwo li fifia.

Ele be woatu nyametsotso mamlɛtɔ ɖe nusiwo wotsɔ wɔe ƒe hatsotso tututu, nusiwo wotsɔ blaa nu ƒe nɔnɔme, dzoxɔxɔ ƒe wɔwɔme ƒe ɖoɖo, nutrenu mɔnu, mɔxenu ƒe taɖodzinu, sedziwɔwɔ ŋuti nuŋlɔɖiwo, nutoa me ƒe nusiwo wogbugbɔ zãna ƒe xɔtuɖoɖowo kple nuawo ƒe gazazã bliboa dzi tsɔ wu be woagblɔ bɔbɔe be polymer ɖeka nyo wu le xexeame katã.