PVC vs PET : Fɛn jumɛn ka fisa ni pakew dilanni ye?

PVC vs PET Foroko: Fɛn jumɛn ka fisa?

PVC ani PET ye fɛnɲɛnamafagalan fila ye minnu bɛ kɛ ka caya ka ɲɛsin pake gɛlɛnw ma, sanubɔlanw, blister packs, clamshells, foli kɛsu ani lakanafɛnw foroko. Hali ni PVC sɛbɛn gɛlɛn jɛlen ni PET sɛbɛn bɛ se ka kɛ kelen ye, u tɛ kelen ye thermoforming kɛcogo la, funteni sigicogo la, impact kɛcogo la, lasegincogo la, sariyasunba sigicogo la ani baarakɛcogo laban bɛnnenw na.

PVC Forokofɛnw ye mun ye?

PVC kɔrɔ ye polivinili kuloridi ye. O ye thermoplastique ye min bɛ se ka kɛ fɛn caman na, a bɛ se ka dilan i n’a fɔ sɛbɛnfura gɛlɛn walima filimu min bɛ se ka wuli ni a dilanni n’a faralicogo caman caman cili ye.

PVC gɛlɛn min bɛ kɛ ka kurukuruw, sɔgɔsɔgɔninjɛw ani pakew kɛ minnu dilannen don ni funteni ye, a ka c’a la, plastiki dɔɔni walima a tɛ sɔrɔ a la. A man kan ka ɲagami ni PVC filimu ye min bɛ se ka wuli, plastiki bɛ min kɔnɔ walasa ka nɔgɔya ni fɛn caman sɛgɛsɛgɛ.

Rigid PVC nafa ka bon a ka foroko kɛcogo la, a hakɛ sabatili, a ka kemikɛli, a ka se ka sɛbɛnni kɛ, a ka die-cutting baarakɛcogo ani a ka bɛn ni funteni-datugulanw ni nɔrɔfɛn caman ye.

PVC Pakew baarakɛcogo minnu bɛ kɛ tuma caman

• Fura furakisɛw ni furakisɛw kurukuruw

• Furakɛminɛnw foroko ni sanubɔlanw minnu dilannen don ni funteni ye

• Fiyeere blister pakew ni clamshells

• Fɛnɲɛnɛmafɛnw, sɛbɛnnikɛlanw ani ɛntɛrinɛti fɛnw foroko

• Box folilenw jɛlenw ani plastiki kartɔn sɛbɛnnenw

• RF-welded packaging ani vinyl fɛn dilannenw minnu bɛ se ka wuli

• PVC shrink film ani tamper-evident bololanɛgɛw baarakɛcogo

PET Forokofɛnw ye mun ye?

PET kɔrɔ ye poliyetilɛni tereftalati ye. O ye poliyesitɛri thermoplastique ye min lakodɔnnen don a jɛlen, a fanga, a gɛlɛya, a hakɛ sabatili ani a bɛnnen don dumuni, minfɛnw ani feerekɛlaw ka foroko caman na.

PET pake daɲɛ bɛ se ka ɲɛsin fɛn damadɔ ma minnu bɛ tali kɛ ɲɔgɔn na. Kalanso ɲuman ka kan ka dɔn sani ka PET ni PVC suma bawo APET , RPET , CPET ani PETG ka baarakɛcogo ni baarakɛcogo tɛ kelen ye.

APET

APET kɔrɔ ye poliyetilɛni tereftalati amɔrifu ye. A bɛ kɛ ka caya sanubɔlan jɛlenw na minnu dilannen don ni funteni ye, dawolo, jɛgɛkɛnɛw, jiridenw minɛnw, burufefeerelaw ka foroko, ɲɛgɛnw foroko ani feerekɛyɔrɔ jiralanw.

RPET

RPET ye PET ye min kɔnɔ, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye. A bɛ se ka kɛ ko fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu bɛ sɔrɔ a ta kɔfɛ walima izini kɔfɛ. Fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu hakɛ ni u bilali bɛ bɔ sɛbɛnfura jɔcogo la, a yecogo wajibiyalenw ani dumuni ni ɲɔgɔn cɛ sariyaw la minnu bɛ sirataama.

CPET

CPET ye kristalɛ ye PET min dabɔra funteni caman na i n’a fɔ dumuni labɛnni sanubɔlanw minnu bɛ bɔ konfirɛzi la ka taa foro la. A man kan ka jate i n’a fɔ a ka funteni baarakɛcogo ni sariya jɛlen APET sɛbɛnfura ye.

PETG

PETG ye glycol-modifié ye PET . A bɛ jɛya ɲumanba di, ka gɛlɛya, ka baarakɛcogo dilan ani ka jɛɲɔgɔnya suganditaw di. PETG bɛ kɛ furakɛli foroko kɔnɔ, kɛsu jɛlenw na, jiralanw na ani baarakɛminɛnw na minnu bɛ kɛ sababu ye ka u dilanni nɔgɔya walima ka RF datugu. Nka, PETG man kan ka jate a yɛrɛma i n’a fɔ a bɛ bɛn PET sariya ma masinw ka segin-ka-bɔnye siratigɛ la.

PVC vs PET Pakew ka ɲɔgɔndan

Tablo nata bɛ PVC foroko sɛbɛn gɛlɛn ni APET foroko sɛbɛn jɛlen standard suma ɲɔgɔn na. Kɛrɛnkɛrɛnnenya la, finiw, fɛn caman jɔcogo ani faralifɛnw bɛ se ka fɛn fila la kelen baarakɛcogo Changer.

Yala PET bɛ kɛnɛya ka tɛmɛ PVC kan wa ?

PVC gɛlɛn ni APET fila bɛɛ bɛ se ka dilan ni kɛnɛyaba ye. A tɛ tiɲɛ ye k’a fɔ ko PVC bɛnnen don dɔrɔn pakew ma minnu tɛ jira.

APET ka teli ka sugandi feerelikɛyɔrɔw ni dumunifɛnw foroko ɲumanw kama bawo a bɛ se ka kɛ sababu ye ka fɛn dɔ ye min tɛ mɔgɔ si ta ye, min bɛ i n’a fɔ gilasi, ni fɛn dilannenw yecogo barikama ye. PVC jɛlen bɛ se ka ton bulu dɔɔni jira, nka PVC sɛbɛn gɛlɛn min ka ɲi kosɛbɛ, o bɛ se ka kɛnɛyako ɲuman di hali bi furakɛli kurukuruw, kɛsu jɛlenw ani feerekɛyɔrɔw ka jɛgɛw ma.

Lajɛ laban bɛ bɔ resin jogo la, a kɔnɔfɛnw lasegincogo, a sɛbɛnfura janya, a sanfɛla fini, a bɔli kɔlɔsili, a faralifɛnw ani a kɛcogo minnu bɛ kɛ ka funteni sɔrɔ sanni ka bɔ polimɛri tɔgɔ dɔrɔn na.

PVC vs PET Baarakɛcogo min bɛ kɛ ni funteni ye

PVC Furakɛcogo min bɛ kɛ ni funteni ye

Rigid PVC bɛ baara kɛ kosɛbɛ thermoforming (thermoforming) la bawo a bɛ nɔgɔya ka se ka fɔ ka ɲɛ, ka cavities (dakunw) caman dilan ani ka caman kɛ ka yafa baarakɛcogo finɛtiri di. A bɛ se ka bɛn kurukuruw ma minnu bɛ sama ka dun, u cogoya gɛlɛnw ani baara minnu bɛ kɛ sababu ye ka denso da ka da a kan.

PVC ka baarakɛcogo bɛ se ka dɛmɛ ka dɔ bɔ pake cogoya caman cili gɛlɛya la ka taa fɛn wɛrɛ la. Nka, funteni kɔlɔsili nafa ka bon hali bi barisa funteni kojugu bɛ se ka kɛ sababu ye ka a kulɛri caman wuli, ka a tiɲɛ walima ka sisiw baara.

PET Furakɛcogo min bɛ kɛ ni funteni ye

APET bɛ yɔrɔ barikamaw di minnu dilannen don ni funteni ye, minnu jɛlen don kosɛbɛ ani minnu ka gɛlɛn kosɛbɛ. A bɛ kɛ ka caya dumunikɛminɛnw, jɛgɛw, gato dondaw, dawolo ani feerekɛyɔrɔw la.

PET baarakɛcogo bɛ se ka kɛ sababu ye ka sɛbɛnfura funteni, mɔbili funteni, foroko hakɛ ani nɛnɛ cogoyaw kɔlɔsi kosɛbɛ. Funteni tɛmɛnen bɛ se ka kɛ sababu ye ka kristalize, ka kɛ sisi ye walima ka dɔ bɔ a dilanni jogo la. baarakɛminɛnw ni tigɛcogo fana bɛ se ka ladilan ni i bɛ wuli ka bɔ PVC la ka taa PET la .

Yala PET bɛ se ka PVC bila a nɔ na thermoforming minɛnw kan minnu bɛ yen wa?

PET bɛ se ka baara kɛ ni thermoforming layini caman ye minnu tun bɛ kɛ fɔlɔ PVC , nka a man kan ka jate i n’a fɔ automatique drop-in replacement. So funteni cogoyaw, foroko funteni, plug-assist dilancogo, nɛnɛ waati, trim baarakɛminɛnw ani stacking kɛcogo bɛ se ka kɛ sababu ye ka fɛn dɔw sɛmɛntiya.

Sɛnɛfɛnw dilanni kɔrɔbɔliw ka kan ka kogo-kɛnɛya tilatilali, nkɔni ɲɛfɔli, flansɛ flakɛli, kɛnɛya, bɔgɔbɔgɔli, tigɛcogo ɲuman ani layini teliya jateminɛ sani jagofɛnw ka tigɛli ka kɛ.

PVC vs PET Sumaya Sigili ni RF Solda

Heat-Seal ka bɛnkan

PVC gɛlɛn bɛ sugandi ka caya blister-card pakew kama bawo a bɛ baara kɛ ni funteni-datugulan caman ye. O bɛ se ka kɛ sababu ye ka baarakɛcogo finɛtiri belebeleba di ani ka sigicogo sabatilen di kurukuruw foroko sira sigilenw kan.

A ka c’a la, sariya PET bɛ fɛn dɔ wajibiya min bɛ kɛ ni finimugu ye, min bɛ kɛ ni nɛgɛ ye, min bɛ kɛ ka datugulan lamini walima min bɛ se ka datugu. Sigili kɛcogo bɛ bɔ funteni, degun, sigi waati, yɔrɔ furakɛli, flansɛ saniya ani finimugu sugandilen.

Arajo-Frequence Soudure (Soudure) min bɛ kɛ ni arajo-fɛrɛkan ye

PVC bɛ jaabi ɲuman di arajo-fɛrɛnkan na, wa a bɛ kɛ ka caya foroko welda, furakɛli bɔrɔw, fɛnw na minnu bɛ fiyɛ ani pake jɛlen dɔw.

Standard APET ka teli ka kɛ RF welding ye. Ni porozɛ dɔ bɛ PET -denbaya jɛlen de wajibiya ka fara RF sigili kan, PETG walima sigida kɛrɛnkɛrɛnnen dɔ bɛ se ka jateminɛ ani ka kɔrɔbɔ.

PVC vs PET Barika baarakɛcogo

Barika baarakɛcogo ka kan ka jateminɛ ka kɛɲɛ ni fura in ka setigiya yɛrɛ ye ji, oksizɛni, kasa, yeelen, tulu ani kemikaliya la. PVC basigilen walima APET si tɛ barika ɲuman di fɛn bɛɛ ma.

Furakɛcogo Blister Barrière

Rigid PVC ye furabuluw dilanni web ye min bɛ kɛ tuma caman na barisa a bɛ dilan nɔgɔya la ani a bɛ kurukuruw dilanni minnu bɛ kɛ ka mɔgɔw bila sira, olu dɛmɛ. Basic PVC ka baarakɛcogo dan ye ji-dafalen ye furaw la minnu ka gɛlɛn kosɛbɛ.

O la, furaw foroko bɛ se ka kɛ ni PVC ye min datugulen don ni PVDC , PVC ye min lamininen don ni PCTFE ye, filimu caman walima aliminiyɔmu basigilen nɛnɛmafɛnw ye ni ji ni oksizɛni lakanani barikama ka kan ka kɛ.

Dumunifɛnw foroko barikalan

APET bɛ gazi ni kasa balilan nafamaw di dumuni nɛnɛma caman ma, burufefɛnw, sɛnɛfɛnw ani mɔgɔw ka fɛnw. Nka, dumuni minnu bɛ mɛn, sogo kuraw, fiɲɛ foroko caman caman cili ani fɛn minnu bɛ oksizɛni sɔrɔ, olu bɛ se ka kɛ sababu ye ka PET/PE , PET/EVOH/PE walima barikalan caman wɛrɛ wajibiya.

A marali waati ka kan ka sɛgɛsɛgɛ ni sanubɔlan dafalen ye, ni datugulan filimu ye, ni sigilan ye, ni dumunifɛn ye, ni a maracogo funteni ye ani ni gazi ɲagaminen ye. Fɛn tɔgɔw dɔrɔn tɛ se ka jago mara waati fɔ.

PVC vs PET ka ɲɛsin Dumunifɛnw foroko ma

PET bɛ kɛ ka caya dumuni ni minfɛnw foroko la k’a sababu kɛ a jɛlen don, a fanga, a girinya ka nɔgɔn, a sɔrɔli hakɛw la minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani a baara sabatili buteliw ni minɛnw kɔnɔ minnu dilannen don ni funteni ye.

Baara minnu bɛnnen don, olu ye jiridenw sanubɔlanw ye, salati minɛnw, burudamɛw, deli sanubɔlanw, gato dondaw, datugulan jɛlenw, minfɛnw buteliw ani fɛn wɛrɛw minnu bɛ friji kɔnɔ walima minnu bɛ kɛ lamini na.

PVC gɛlɛn bɛ se ka kɛ fana dumuni kɛrɛnkɛrɛnnenw foroko kɔnɔ ni resin, sabatilifɛnw, faralifɛnw ani a dilanni dafalen bɛ sariyaw labato dumuni laɲinitaw kan ani a kɛcogo cogoyaw kan. O la, a tɛ tiɲɛ ye k’a fɔ ko PVC bɛɛ ma bɛn dumuniko ma.

O bɛɛ n’a ta, dumuni suguya caman ni feerekɛla caman bɛ PET fɛ k’a sababu kɛ sugu sɔnni ye, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu sɔrɔli ani u bɛ bɛn PET -sisɛbɛ pakew dilanni fɛɛrɛw ma.

PVC ni PET ka ɲɛsin furakɛli kurukuruw foroko ma

Mun na PVC bɛ baara kɛ ni a ye kosɛbɛ

Rigid PVC tora filimu dilancogo ye min bɛ kɛ kosɛbɛ furakɛli furakisɛw ni furakisɛw kurukuruw kama bawo a bɛ funteni sɛnɛcogo, jɛya, dingɛw bincogo kɔrɔsilen, bɛnkan ni aluminiyɔmu push-through foil ani a dilanni baarakɛcogo sigilen fara ɲɔgɔn kan.

Ni PET bɛ se ka jateminɛ

APET , PETG ani poliyesitɛri kɛrɛnkɛrɛnnenw jɔcogo bɛ se ka jateminɛ ni porozɛ dɔ bɛ pake min tɛ PVC -ko ye, a gɛlɛya ka bon, sterilize fɛɛrɛ wɛrɛ walima a bɛ bɛn ni fɛn kɛrɛnkɛrɛnnen dɔ fɛɛrɛ ye.

Furakɛcogo kurukuru caman cili ka bɔ PVC la ka taa PET la, o bɛ fɛn caman wajibiya ka tɛmɛ sɛbɛnfura janya kelen sugandili kan. Foroko taabolo, datugulan bɛnkan, sigilan dafalen, ji barika, oksizɛni barika, sabatili kunnafoniw ani sariyasɛbɛnw ka kan ka tiɲɛ kokura.

PVC vs PET ka ɲɛsin Retail Blisters ni Clamshells ma

PVC Sugandili kɛ Tuma min na

• Layini min bɛ yen, o bɛ ɲɛnabɔ ka ɲɛ PVC thermoforming kama

• Funteni min bɛ datugu ni funteni ye, o ka kan ka kɛ

• RF welding ye pakew dilanni baara dɔ ye

• O dilancogo bɛ die tigɛ nɔgɔman de wajibiya ani ka dilancogo gɛlɛnw de wajibiya

• Sigida sariyaw ni kiliyanw ka fɛn ɲɛfɔlenw bɛ sira di PVC

PET Sugandili kɛ Tuma min na

• Fɛnɲɛnɛma jɛlen ni fɛn dilannenw yecogo ye fɔlɔfɔlɔkobaw ye

• Kunnafonidila bɛ PET walima PET kɔnɔkow ɲini minnu bɛ segin ka kɛ fɛn wɛrɛw ye

• Marka in bɛ ni PET -focused pakew dilanni fɛɛrɛ ye

• Fanga ni nɔ bilali baarakɛcogo ɲuman de wajibiyalen don

• Foroko in dabɔra PET dalajɛ ni segin-ka-bɔ-cogo dɔ kama min bɛ sɔrɔ

Nafaw ni dantigɛliw PVC Foroko la

Nafa minnu bɛ Rigid PVC la.

• Fenɛtiri min bɛ kɛ ni thermoforming ye, o ka bon ani min bɛ yafa

• Detail reproduction ɲuman ka ɲɛsin blister cavities ma

• A bɛ bɛn ni funteni-datugulan caman ye

• A bɛnnen don RF welding ma

• Printability ɲuman, bonding ani die-cutting baarakɛcogo ɲuman

• A bɛ sɔrɔ cogo jɛlen na, kulɛrilen, opaque ani kɛrɛnkɛrɛnnenya la

• Baarakɛcogo sabatilen furakɛli ni furakɛli foroko kɔnɔ

Danyɔrɔw bɛ Rigid PVC la.

• Mɔgɔw ​​ka fɛnw lajɛli ni u lasegincogo danma mara caman kɔnɔ

• A bɛ se ka PET segin-ka-bɔnye nɔgɔ ni a ma labɛn cogo jugu la

• A bɛ baarakɛcogo kɔrɔsilen de wajibiya walasa ka a yɛrɛ tanga funteni tiɲɛni ma

• A bɛ se ka kɛ sababu ye ka dankarili kɛ feerekɛla, fɛntigi walima sugu kɛrɛnkɛrɛnnenw ka fɛnw na

• Basic PVC bɛ se ka kɛ ni finiw ye walasa ka furakɛli barika baara kɛcogo ɲuman sɔrɔ

• PVC furakisɛ minnu bɛ se ka wuli, olu bɛ plastiki ni faralifɛnw labatoli kɔlɔsi koɲuman

Nafaw ni dantigɛliw PET Foroko la

Nafa minnu bɛ PET la.

• Transparence haute ani yele yecogo neutre

• Fanga ɲuman, gɛlɛya ani dimensional sabatili

• A bɛ kɛ kosɛbɛ dumuni, minfɛnw ani feerekɛyɔrɔw foroko la

• A bɛ sɔrɔ ni fɛnw ye minnu bɛ segin ka kɛ fɛn wɛrɛw ye, u kɛlen kɔfɛ

• Mɔgɔw ​​ka segin-ka-bɔnye dɔnniya sabatilen ka ca ni PVC

• A bɛnnen don sanubɔlanw, jɛgɛw, dawolo, buteliw ani kɛsu jɛlenw ma

• A bɛ se ka dɛmɛ don pakew dilanni nɔgɔman na ni a dilannen don ka ɲɛ

Dantigɛli minnu bɛ PET

• A bɛ se ka kɛ ko a bɛ kɛ sababu ye ka funteni hakɛ kɔlɔsili gɛlɛn kɛ ni thermoforming ye

• Standard APET ma bɛn foronto sumayacogo kɔrɔ ma

• Tuma caman na, funteni sirili bɛ kɛ ni finimugu walima datugulan ye min bɛ bɛn a ma

• Trim ni die-cut baarakɛminɛnw bɛ se ka mago ɲɛ optimisation na

• PETG ani fɛn caman sigicogo dɔw bɛ se ka kɛ ko u tɛ bɛn ni PET segin-ka-bɔnye sariyalen ye

• PET thermoforms tɛ lajɛ sigida ka segin-ka-bɔnye porogaramu bɛɛ kɔnɔ

• Fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu ka ca, olu bɛ se ka nɔ bila kulɛri la, a jɛlen na ani a kɛcogo la

Yala PET bɛ sabati ka tɛmɛ PVC kan wa ?

PET ka teli ka nafa sɔrɔ feerekɛlaw ka pakew la bawo PET buteliw bɛ dɔn kosɛbɛ ani u bɛ lajɛ, wa jagokɛla RPET feereli cakɛdaw kɔgɔlen don ni u bɛ tali kɛ ɲɔgɔn na. PET pakew fana bɛ se ka kɛ ni fɛnw ye minnu bɛ segin ka kɛ fɛn wɛrɛw ye, ni u yecogo, u baaracogo ani u ka ɲɔgɔn sɔrɔli wajibiyalenw bɛ sira di.

Nka, a ka bon kojugu ka PET foroko kelen-kelen bɛɛ ɲɛfɔ ko a tɛ sigida lakana walima ko a bɛ se ka segin ka kɛ fɛn wɛrɛ ye pewu. PET sanubɔlanw ni shɔw tɛ se ka sɔn PET buteliw bɛ lajɛ yɔrɔ o yɔrɔ. Labɛliw, nɛgɛw, kulɛri dibimanw, barikalanw, fɛn min bɛ fɛnw minɛ ani PETG fɛnw fana bɛ se ka dɔ bɔ fɛnw lasegincogo bɛnkan na.

PVC ye fɛɛrɛko siratigɛ la, a bɛ se ka segin ka kɛ fɛn wɛrɛ ye, wa PVC seginkanni sira kɛrɛnkɛrɛnnenw bɛ yen. A dantigɛli waleyali ye ko dalajɛ, dɔnni ani sugu laban sɔrɔli tɛ sɔrɔ kosɛbɛ feerekɛla ka pake misɛnnin caman na.

Sigida sabatili jateminɛ kɔrɔ ka kan ka jateminɛ kɛ fɛnw girinya, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, pakew ni fɛn dilannenw hakɛ, fɛn dilannenw lakanani, dumunifɛnw tiɲɛni kunbɛnni, bolifɛnw bolicogo ɲuman, sigida lajɛ yɛrɛyɛrɛ ani fɛn dilannenw laban sugu ɲuman.

PET Foroko dilanni walasa ka fɛnw lasegin u cogo kɔrɔ la

• Baara kɛ ni PET basigicogo jɛlen ye ni a bɛ se ka kɛ

• Aw bɛ polimɛriw ni fɛn caman kɛ minnu tɛ bɛn ɲɔgɔn ma, olu dɔgɔya

• Labeli, enki ani nɔrɔlanw sugandi minnu dabɔra PET ka segin u cogo kɔrɔ la

• Aw bɛ aw yɛrɛ tanga dibi kulɛri kojugu ma min bɛ se ka fɛnw danfara bali

• Foroko in dilan walasa ka otomatiki optique ni dimensions sorting kɛ

• Aw ye a sɛgɛsɛgɛ ko PET thermoforms bɛ sɔn sugu laɲininen na sani aw ka segin-ka-bɔnyew fɔ

Yala PVC walima PET musaka ka ca wa?

Sariya banbali si tɛ yen min b’a jira ko PET musaka ka ca ni PVC ye tuma bɛɛ walima ko PVC ye foroko musaka dɔgɔman ye tuma bɛɛ. Resin sɔngɔ bɛ Changé jamana ka kɛɲɛ ni jamana ye, fanga musakaw, sɔrɔ cogoyaw, recycled-content wajibiyalenw ani komandi waati.

Foroko musaka bɛɛ ka kan ka kɛ ninnu ye:

• Sɛbɛn sɔngɔ kilo kelen na

• Fɛnw hakɛ ani yɔrɔ minnu bɛ bɔ kilo kelen na

• A ka kan ka kɛ sɛbɛnfura janya ye

• Thermoforming cycle waati ni fanga baara

• Trim scrap ani so kɔnɔ regrind seginni

• Baarakɛminɛnw ni minɛnw caman cili

• Funteni-sigilanw, nɔrɔlanw ani datugulanw

• Kari, ban ani packing-line baarakɛcogo ɲuman

• Recycled-content walima sariya labatoli

• Sɛnɛfɛnw dilannikɛlaw ka kunkanbaaraw janya ani nɔgɔw ladonni sara

Fɛn min sɔngɔ ka bon kilo kelen na, o bɛ se ka kɛ sababu ye ka a foroko musaka bɛɛ lajɛlen dɔgɔya hali bi ni a bɛ sira di ka jigin, ka layini teliya ka caya, ka pake tiɲɛnenw dɔgɔya walima ka fɛn dilannenw lakana ka ɲɛ.

Sugandili kɛcogo PVC ni PET Pakew cɛ

Kunnafoni minnu ka kan ka di i ka sɛbɛnw dilanbaga ma

• Foroko dafalen suguya ani fɛn min bɛ pake kɔnɔ

• A wajibiyalen don sɛbɛnfura janya, a bonya ani a wulicogo cɛmancɛ la

• A ɲɛ jɛlen don, a ɲɛ ye kulɛri ye, a ɲɛ ye matiri ye, a bɛ kɛ ni nɛnɛ ye walima a ɲɛ tɛ ye

• Thermoforming machine ani funteni fɛɛrɛ

• Dugukolo juguya ni kɔnɔna jateminɛcogo dabɔli

• Funteni datuguli, nɔrɔli sirili walima RF-welding fɛɛrɛ

• Dumuni, furakɛli, furakɛli walima izini jɛɲɔgɔnya wajibiyalenw

• Barrière wajibiyalen ani a marali waati

• Npogotiginin walima kɔnɔkow lasegincogo wajibiyalenw

• Jamana min bɛ taa yɔrɔ la ani kiliyanw ka fɛnw ɲɛfɔcogo

• Kalo o kalo walima san o san komandi hakɛ

Misali minnu bɛ kɛ tuma caman na ni u bɛ PVC ni PET suma ɲɔgɔn na.

Ka PVC Formula Bɛɛ minɛ i n’a fɔ kelen

PVC , plasitiki gɛlɛn gɛlɛn PVC , furakɛli PVC , dumuni-minɛn PVC ani PVC minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu ka furakɛlicogo ni u kɛcogo tɛ kelen ye. Fɛn minnu bɛ fɔ plastiki PVC minnu bɛ se ka wuli, olu man kan ka kɛ u yɛrɛma kurukuru gɛlɛnw kan.

Ka APET , CPET ani PETG minɛ i n’a fɔ ɲɔgɔn falen-falen

APET bɛ kɛ ka caya ka kɛ pake jɛlenw ye minnu dilannen don ni funteni ye, CPET bɛ kɛ ka ɲɛsin sanubɔlanw ma minnu funteni ka bon, ani PETG bɛ dilancogo ni sigicogo wɛrɛw di. Ni i ye sugandili kɛ daɲɛ ' PET ' dɔrɔn fɛ, o bɛ se ka kɛ sababu ye ka baara kɛcogo dɛsɛ walima ka segin-ka-bɔnye fɔcogo juguw kɛ.

Ni an y’a miiri ko Resin Code dɔ bɛ Garanti kɛ ka fɛnw lasegin u cogo kɔrɔ la

Resin dɔnni kode dɔ bɛ plastiki fɔlɔ jira; a tɛ a jira ko foroko dafalen bɛ lajɛ, ka tila ka tila ka segin a cogo kɔrɔ la sannikɛla ka sugu la.

Fɛnɲɛnɛma sugandili dɔrɔn ka kɛɲɛ ni Kilogaramu kelen sɔngɔ ye

Fɛn minnu bɛ sɔrɔ, u bonya, u dilanni teliya, u sɔgɔli hakɛ, u kari, u sigicogo dɛsɛ ani u dilanni musakaw, olu bɛ se ka kɛ nafama ye ka tɛmɛ resin sɔngɔ danfara kan.

Dumuniko lakanani kofɔlenw kɛli diɲɛ bɛɛ kɔnɔ

Dumuni ni ɲɔgɔn cɛ bɛnnen don, o bɛ bɔ fɛn dilannenw bɛɛ lajɛlen na ani u kɛcogo laɲininenw na. Sannikɛlaw ka kan ka fɔtaw ni sɛgɛsɛgɛliw ɲini minnu bɛ bɛn u ka dumuni suguya ma, u funteni, u kuntaala ani u taayɔrɔ suguya.

Ɲininkali minnu bɛ kɛ tuma caman na PVC vs PET Foroko kan

Danfaraba jumɛn bɛ PVC ni PET pakew cɛ?

PVC bɛ caman kɛ ka yafa foroko ni sigili kɛcogo di, die tigɛ nɔgɔya ani RF-welding seko barikama. PET bɛ jɛlenya min tɛ mɔgɔ si ta ye, fanga caman, dumuni ni minfɛnw sɔnni ka caya, fɛn minnu bɛ se ka segin u cogo kɔrɔ la, olu sugandiliw di ani ka se ka fɛnw lasegincogo ɲumanw sɔrɔ minnu sigira sen kan.

Yala PET ka fisa tuma bɛɛ ni PVC ye pakew dilanni na wa?

Ayi PET ka fisa tuma caman na dumuni pake jɛlenw ni porozɛw la minnu kɔnɔfɛnw bɛ segin ka kɛ fɛn wɛrɛw ye, k’a sɔrɔ PVC bɛ se ka baara kɛcogo ɲuman di furakɛli kurukuruw ma, feerelikɛlaw ka kurukuruw kartiw ani RF-welded fɛnw na.

Yala PET ka jɛya ka tɛmɛ PVC kan wa ?

APET a ka c’a la, a bɛ yecogo dɔ di min tɛ mɔgɔ si ta ye kosɛbɛ ani min bɛ kɛnɛya. PVC gɛlɛn jɛlen fana bɛ se ka jɛyaba di, hali ni kalasi dɔw bɛ ni bulu ye dɔɔnin. Yecogo yɛrɛ bɛ bɔ a hakɛ, a bonya, a faralenw ani a baarakɛcogo la.

Yala PVC sɔngɔ ka dɔgɔ ni PET ye wa ?

A tɛ kɛ sugu bɛɛ la walima baarakɛcogo bɛɛ la. Resin sɔngɔ bɛ wuli, wa pakew musaka bɛɛ lajɛlen fana bɛ bɔ fɛnw hakɛ la, u bonya la, u bonya la, u layini teliya la, u tiɲɛnenw, u dacogo la, u ka baarakɛminɛnw na ani u bancogo la.

Yala PVC bɛ se ka kɛ dumunifɛnw foroko ye wa?

PVC furakisɛ kɛrɛnkɛrɛnnenw bɛ se ka kɛ dumuni ni ɲɔgɔn cɛ baarakɛcogo yamaruyalenw na. Sannikɛlaw ka kan ka resin, sabatilifɛnw, faralifɛnw, jiginni wajibiyalenw ani baarakɛcogo yamaruyalenw sɛgɛsɛgɛ sanni u ka u jigi da PVC daɲɛ dɔrɔn kan.

Yala PET dumuni ye farati ye wa?

PET bɛ kɛ kosɛbɛ dumuni ni minfɛnw foroko kɔnɔ, nka fɛn kɛrɛnkɛrɛnnen suguya ni a foroko dafalen ka kan ka kɛɲɛ ni sariyaw ye minnu bɛ dumuni laɲinitaw, funteni ani ɲɔgɔn sɔrɔli waati kan. PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ tugu-tugu-ɲɔgɔn kɔ ni taabolo kɔlɔsili wɛrɛw de wajibiya.

Yala PVC gɛlɛnw bɛ plastiki kɛ wa?

A ka c’a la, PVC foroko sɛbɛn gɛlɛn kɔnɔ, plastiki dɔɔni walima a tɛ sɔrɔ a la. Filimuw PVC minnu bɛ se ka wuli, plastiki bɛ sɔrɔ olu kɔnɔ walasa ka nɔgɔya dilan. Fɛnɲɛnɛma suguya fila man kan ka jate i n’a fɔ u dilannen don cogo kelen na.

Fɛn jumɛn ka fisa furakɛli kurukuruw ma?

PVC gɛlɛn bɛ to ka caya k’a sababu kɛ a ka thermoforming, push-through ani heat-sealing baarakɛcogo ye. PET -based alternatives bɛ se ka jateminɛ poroze kɛrɛnkɛrɛnnenw kama, nka barika, sigilan dafalen, foroko ani fɛn dilannenw sabatili wajibiyalenw ka kan ka tiɲɛ kokura.

Fɛn jumɛn ka fisa dumunikɛminɛn jɛlenw ma?

APET walima RPET ka teli ka kɛ dumuni nɛnɛmabɔlan jɛlenw ye k’a sababu kɛ a cogoya, a fanga ani a sɔnni ye dumuni foroko la. Funteni-sɔrɔ-minɛnw bɛ se ka CPET , PP walima fɛn kɛrɛnkɛrɛnnen wɛrɛ de wajibiya.

Yala PET bɛ se ka PVC bila a nɔ na blister foroko kɔnɔ wa?

A bɛ se ka kɛ, nka a ka c’a la, fɛn caman tigɛli bɛ fɛn dilanni kɔrɔbɔliw ni ladilanni de wajibiya ka kɛɲɛ ni funteni, fɛn dilanni, tigɛcogo, dacogo ani datugucogo ye. Furakɛcogo fana bɛ pakew ni sabatili sɛgɛsɛgɛli kura de wajibiya.

Yala PET ka nɔgɔn ka segin a cogo kɔrɔ la ka tɛmɛ PVC kan wa ?

PET caman na, a ka fɛnw dalajɛcogo ni u lasegincogo sigilen don kosɛbɛ, kɛrɛnkɛrɛnnenya la buteliw kama. Nka, PET sanubɔlanw ni jɛgɛw tɛ sɔn yɔrɔ bɛɛ, wa pakew dilanni ka kan ka bɛn ni segin-ka-bɔnye kɛcogo ye min bɛ tali kɛ o la.

Yala PETG bɛ se ka segin ka kɛ ni PET ye wa ?

PETG man kan ka bila a yɛrɛma PET segin-ka-bɔnyew kɔnɔ. A ka kristali ni a wulicogo danfaralenw bɛ se ka baarakɛcogo gɛlɛyaw lase, o la sigida la, fɛn wɛrɛw dilanni ni a dilanni-ka-segincogo bilasirali ka kan ka lajɛ.

Fɛn jumɛn ka fisa ni RF sigili ye?

PVC bɛ bɛn kosɛbɛ RF sigili ma caman na. PETG fana bɛ se ka jateminɛ RF-sigilen baara dɔw la, k’a sɔrɔ a ka c’a la, sariya APET tɛ fɛn fɔlɔ ye min sugandira o baara in kama.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ PVC ni PET pakew sɛbɛnfura la?

O fɛn fila bɛɛ bɛ sɔrɔ u bonya suguya caman na. A janya bɛnnen bɛ bɔ pakew hakɛ la, a dilanni juguya, a fɛn dilannen girinya, a nɔfɛko wajibiyalenw, a dalajɛ doni, a sigicogo ani a laɲinifɛnw dɔgɔyali.

Sannikɛlaw ka kan ka sɛbɛn jumɛnw ɲini?

Sannikɛlaw ka kan ka fɛɛrɛko kunnafonisɛbɛn ɲini, lakana kunnafonisɛbɛn, sɛgɛsɛgɛlisɛbɛn, a kɛcogo walima a kɔnɔfɛnw jiracogo, dumunifɛnw ni ɲɔgɔn cɛ sɛbɛnw ɲini yɔrɔ minnu na a bɛ se ka kɛ ani fɛn dantigɛlenw sɛgɛsɛgɛli rapɔɔri minnu wajibiyalen don.

PVC ani PET Pakew dilanni minɛnw ka bɔ HSQY Plastiki la

HSQY Plastic Group bɛ PVC ani PET sɛbɛnfura gɛlɛnw di walasa ka thermoforming, sɛbɛnni, die tigɛ, blister pakew, dumunikɛminɛnw, kɛsu jɛlenw ani foroko baara wɛrɛw kama.

Sannikɛlaw bɛ se ka HSQY ka sɛbɛnw lajɛ PVC sɛbɛnfura minɛnw , o la rigid PVC sɛbɛn , walima sɛgɛsɛgɛli PET sɛbɛn min bɛ kɛ ka pakew dilan.

Sugandili minnu bɛ sɔrɔ, olu bɛ se ka kɛ u bonya, u bonya, u kurulenw hakɛ, u kulɛriw, u sanfɛla finiw, u kɔnɔfɛnw jɔcogo minnu bɛ segin ka kɛ fɛn wɛrɛw ye ani u ka fɛnw ɲɛfɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye. Fɛnw ladilikanw ka kan ka sinsin foroko masin kan, pake laban dilanni, sigicogo ani sariyaw wajibiyalenw.

Kuncɛli

PVC ani PET fila bɛɛ ye pakew dilannifɛn nafamaw ye, nka u bɛ fɛɛrɛko ni jago gɛlɛya wɛrɛw ɲɛnabɔ. Rigid PVC bɛ thermoforming dannamɔgɔ di, funteni-sigilan ka bon, die tigɛ nɔgɔya ani RF-welding baarakɛcogo. PET bɛ jɛyaba di, fanga, dumuni-pakew sɔnni, fɛn minnu bɛ segin-ka-bɔ-fɛnw sugandi ani ka dɔnniyaba di mɔgɔw ma minnu bɛ fɛnw lasegin u cogo kɔrɔ la.

PET ka teli ka kɛ sugandili ɲuman ye dumunikɛminɛn jɛlenw na, minfɛnw minɛnw ani feerekɛyɔrɔw foroko kɔnɔ. PVC bɛ to a nafa ka bon kosɛbɛ furakɛli kurukuruw la, furakɛli pakew la, kurukuruw kartiw la minnu datugulen don ni funteni ye ani baarakɛcogo minnu jɔlen bɛ PVC fɛn caman tigɛli minɛn kɔrɔw lamini na.

Desizɔn laban ka kan ka sinsin fɛnw hakɛ tigitigi kan, pakew jateminɛcogo, thermoforming kɛcogo, sigicogo, barika laɲini, sariya labatoli sɛbɛnw, sigida la fɛnw lasegincogo ani pakew musaka bɛɛ lajɛlen sanni ka fɔ cogo nɔgɔman na ko polimɛri kelen ka fisa diɲɛ fan bɛɛ.