HI PS krataa ma Packaging & Industrial Afã horow

HI PS krataa ma Packaging & Industrial Afã horow

HSQY HIPS krataa so nsɛm ka nsunsuansoɔ a ɛko tia, ɛyɛ den, adansiɛ a emu yɛ hare ne adwumayɛ a ɛnyɛ den bom ma nneɛma a wɔde kyekyere, nneɛma a wɔde kyerɛ, mfiri no afã, ahobammɔ katasoɔ ne mfiridwuma mu thermoformed afã ahodoɔ.

High Impact Polystyrene, a wɔtaa frɛ no tiawa sɛ HIPS , yɛ polystyrene a wɔde rɔba phase ayɛ mu nsakrae ma ɛyɛ den na ɛko tia mpaapaemu bere a wɔde toto General Purpose Polystyrene a wɔahyɛ da ayɛ ho no.

Mprempren HSQY de HIPS ne PS krataa so nsɛm s a ne kɛse bɛyɛ 0.2mm kosi 6mm, a ne tɛtrɛtɛ bɛyɛ 1600mm ne kɔla fitaa, tuntum anaa nea wɔayɛ no sɛnea wɔpɛ ma thermoforming, vacuum forming, printing, packaging ne industrial fabrication.

HIPS Polystyrene Krataa no Nkyerɛkyerɛmu

Specification Hyɛ no nsow: Ɛsɛ sɛ wɔsi awieɛ thickness tolerance, dimensions, kɔla, surface finish ne forming adwumayɛ so dua sɛdeɛ HIPS grade a wɔapaw ne application a wɔawie no teɛ.

Dɛn Ne Polystyrene Krataa a Ɛwɔ Nkɛntɛnso Kɛse?

High Impact Polystyrene yɛ polystyrene ade a wɔayɛ no foforo a wɔayɛ sɛ wɔde bedi General Purpose Polystyrene a ɛyɛ gyinapɛn no suban a ɛyɛ mmerɛw kakra no so nkonim. A rubber-modified phase ma toughness tu mpɔn bere a kura mfaso rigidity ne processing adwumayɛ.

HIPS taa yɛ opaque mmom sen sɛ ɛbɛyɛ nea ɛda adi kɛse. Kɔla fitaa ne tuntum yɛ kɔla a wɔtaa de di gua, bere a wobetumi ayɛ kɔla ahorow a wɔahyɛ da ayɛ ne nea wɔde di dwuma pɔtee nso sɛnea adwuma no kyerɛ no.

Wɔtaa paw nneɛma no ma nneɛma a wɔde thermoformed, a wɔatintim ne nea wɔayɛ a ɛyɛ kɛse a adetɔfo hwehwɛ sɛ wɔde nneɛma a ɛho ka sua a ɛka bom yɛ a ɛko tia nsunsuanso, adansi a emu yɛ hare ne nea ɛnyɛ den sɛ wɔbɛyɛ.

HI PS krataa Ɛnyɛ E PS anaa XPS Foam a Ɛyɛ Den

Saa HSQY ade yi yɛ High Impact Polystyrene a ɛyɛ den krataa so nsɛm . Ɛnsɛ sɛ wɔde frafra polystyrene a wɔatrɛw mu (E PS ) anaa extruded polystyrene ( XPS ) foam insulation board.

Mfaso Titiriw a Ɛwɔ HI PS krataa

• Nsunsuansoɔ a ɛko tia nsunsuansoɔ a ɛtu mpɔn: Rɔba nsakraeɛ ma ɛyɛ den na ɛko tia mpaapaemu yie sene gyinapɛn GPPS .

• Thermoformability pa: Wobetumi de vacuum ayɛ HIPS grades a ɛfata anaasɛ wɔde thermoformed ayɛ tray ahorow a wɔde di dwuma , liners, covers ne housings.

• Nea emu yɛ hare na ɛyɛ den: HIPS ma ɛyɛ den a mfaso wɔ so bere a ɛma nneɛma a wɔawie no yɛ hare kakra.

• Easy fabrication: HIPS betumi atwitwa, routed, drilled, die twa na CNC machined denam akwan a ɛfata a wɔfa so yɛ adwuma so.

• Fafa a wotumi tintim: krataa so nsɛm soro a ɛfata betumi aboa screen, dijitaal ne tintim nhyehyɛe afoforo wɔ nhyiam sɔhwɛ akyi.

• Paintable ne decorative: Wobetumi de coatings, labels ne laminates a ɛne ne ho hyia ahyɛ baabi a ɛho hia.

• Kɔla ahorow a wɔahyɛ da ayɛ: Wobetumi aka kɔla fitaa, tuntum ne adwuma pɔtee bi ho asɛm sɛnea nea wɔyɛ no ahwehwɛde ahorow te.

• Nneɛma a wɔyɛ a ɛho ka sua: Wɔtaa paw HIPS ma volume thermoforming ne fabricated applications a ɛho hia sɛ wɔde plastic a ɛyɛ den a ɛho ka sua.

HI PS krataa ma Nneɛma a wɔde kyekyere nneɛma

HIPS betumi ayɛ thermoformed ayɛ ahobammɔ tray ahorow a wɔde di dwuma , inserts, clamshell-style components ne afoforo rigid packaging structures baabi a impact resistance ne dimensional stability ho hia.

Ɛsɛ sɛ wɔn a wɔtɔ nneɛma a wɔde kyekyere nneɛma no kyerɛ apampan nsusuiɛ, forming bun, stiffness a wɔhwehwɛ, stacking design, product weight ne mmara biara a wɔhwehwɛ ansa na wɔapaw material grade.

Ɛnsɛ sɛ wɔkyerɛkyerɛ gyinapɛn HIPS mu ara kwa sɛ ɛfata ma aduan, nnuru anaa aduruyɛ mu nkitahodi. Saa akwammisa ahorow no hwehwɛ sɛ wosi nneɛma no dodow pɔtee ne nkrataa a ɛfata so dua.

HI PS krataa ma Thermoforming & Vacuum a Wɔde Yɛ Nneɛma

Thermoforming yɛ aguadi mu dwumadie titire baako ma HIPS krataa so nsɛm . Wɔma krataa so nsɛm no yɛ hyew kosi sɛ ɛbɛyɛ nea ɛyɛ mmerɛw sɛnea ɛsɛ na afei wɔde vacuum, nhyɛso anaa mfiri mmoa yɛ no sɛnea ɛte wɔ nkuku so.

HIPS wɔtaa de di dwuma ma tray ahorow a wɔde di dwuma , liners, nnwinnadeɛ katasoɔ, adan, display components ne appliance parts ɛfiri sɛ grades a ɛfata ka formability pa ne toughness kɛseɛ sene standard polystyrene bom.

HI PS krataa ma Mfiri no Nneɛma a Wɔde Yɛ Adwuma

HIPS wɔtaa hwehwɛ frigye mu ntama, mfiri a ɛwɔ mu, adan, nkatasoɔ ne tray ahorow a wɔde di dwuma ho ɛfiri sɛ ɛka thermoforming adwumayɛ, rigidity, surface appearance ne sikasɛm mu dwumadie bom.

Wɔ mfiri dwumadie ho no, ɛsɛ sɛ adetɔfoɔ kyerɛ adwumayɛ mu hyeɛ, detergent anaa nnuru a wɔde hyɛ mu, forming bun, impact ahwehwɛdeɛ, kɔla ne surface hwɛbea ansa na wɔapene grade bi so.

HI PS krataa ma Nsɛnkyerɛnne & POP Nkyerɛkyerɛmu

HIPS wobetumi de adi dwuma ama aguadidan mu nsɛnkyerɛnne, POP/POS nkyerɛkyerɛmu, dawurubɔ panels, ɔyɛkyerɛ mfonini ne nsɛm a wɔde hyɛ nkurɔfo nkuran wɔ baabi a emu duru a ɛba fam, krataa so nsɛm kateeyɛ ne nea ɛnyɛ den sɛ wɔbɛyɛ no ho wɔ mfaso.

Printing adwumayɛ gyina krataa so nsɛm soro, ink chemistry, curing tebea ne surface ayaresa biara a ɛho hia so. Ɛsɛ sɛ nnwumakuw a wotintim nhoma no sɔ sɛnea wɔyɛ no ankasa hwɛ ansa na wɔatintim wɔ aguadi mu.

HI PS krataa ma Ahobammɔ Nkatasoɔ & Adan

HIPS wobetumi atwitwa anaa wɔayɛ no thermoformed ayɛ no nnwinnade a emu yɛ hare a wɔde kata so, adan a ɛnyɛ nhyehyɛe, ahobammɔ panels ne fabricated enclosures.

Ɛsɛ sɛ nnwuma no kyerɛkyerɛ nkɛntɛnsoɔ ahwehwɛdeɛ, span a wɔmmoa, ɔkwan a wɔfa so kyekyere, adwumayɛ mu hyeɛ ne nneɛma a atwa yɛn ho ahyia a ɛda adi sɛdeɛ ɛbɛyɛ a wɔbɛtumi apaw krataa so nsɛm ne kɛseɛ ne ne grade sɛdeɛ ɛfata.

HI PS krataa ma Kar Mfinimfini Nneɛma

Wobetumi asusuw HIPS grades a wɔapaw ho ama non-structural kar mu trim ne formed components a sikasɛm mu dwumadie, hwɛbea ne nsunsuansoɔ adwumayɛ a ɛkɔ fam ho hia.

Ɛsɛ sɛ kar adwuma ahorow kyerɛ ɔhyew a ɛko tia, nkɛntɛnso a ɛyɛ adwuma, hua, mframa a wɔtow gu, ogya a ɛtumi hyew ne OEM-ahwehwɛdeɛ pɔtee. Ɛnsɛ sɛ wɔde Standard HIPS di dwuma ara kwa sɛ ade a ɛfata sɛ wɔde yɛ kar.

HIPS vs. GPPS Polystyrene Krataa a Wɔde Di Dwuma

HIPS vs. ABS Krataa

Surface Finish, Ntintim & Asiesie

Surface quality ho hia bere a wɔde HIPS di dwuma ma displays, signage, appliance parts ne decorative panels. Ɛsɛ sɛ wɔkyerɛkyerɛ ahwehwɛde a ɛfa soro a ɛyɛ mmerɛw, ɛhyerɛn, ɛyɛ matte anaa nea wɔde di dwuma pɔtee mu ansa na wɔayɛ.

HIPS abasobɔdeɛ a ɛfata betumi aboa tintim, mfoniniyɛ, nkyerɛwdeɛ ne lamination. Adwumayɛ a etwa to no gyina ɔfasu tebea, ink anaa coating chemistry, curing nhyehyɛe ne post-processing adwumayɛ.

Twitwa, CNC Mfiridwuma & Nneɛma a Wɔyɛ

HIPS betumi atwitwa, atutu, afa kwan so, atwa die na wɔde nnwinnade a ɛfata ne dwumadie tebea a ɛfata ayɛ CNC mfiri. Eyi ma wotumi de nneɛma no ma sɛ ntama a ɛyɛ tratraa anaasɛ wɔdan no nneɛma a wɔayɛ no sɛnea wɔpɛ.

Ɛsɛ sɛ wɔhwɛ adwinnade geometry, aduan ahoɔhare ne ɔhyew awo ntoatoaso so sɛnea ne kɛse te na ama anoano a ɛho tew ne nsusuwii a ɛyɛ pɛpɛɛpɛ.

Indoor & Outdoor a Wɔde Di Dwuma

Standard HIPS no, wɔde di dwuma titiriw wɔ dan mu anaa mmeae a wɔahyɛ so. Ɛnsɛ sɛ wɔfa no sɛ abɔnten so a wɔbɛda no adi bere tenten gye sɛ wɔayɛ grade pɔtee no na wɔasɔ ahwɛ wɔ UV ne wim tebea a wɔhwehwɛ no ho.

Wɔ abɔnten nnwuma ho no, kyerɛ owia hann a wɔhwɛ kwan, ɔhyew a ɛkɔ soro, ɔsom nkwa nna ne sɛnea ɛte sɛnea ɛbɛyɛ a wobetumi asusuw grade a ɛfata a ɛyɛ den anaa nneɛma foforo a wɔde besi ananmu ho.

Nnuru & Nsuo a Ɛko Tia

HIPS ntumi nnye nsuo pii na ɛtumi gyina nnuru a ɛyɛ mmerɛw a wɔapaw ano, nanso ne tumi a ɛko tia no gu ahodoɔ kɛseɛ wɔ nnuru su ne dwumadie tebea mu.

Sɛ ade a wɔawie no bɛka nneɛma a wɔde tew nneɛma ho, ngo, nsa, nnuru a wɔde siw ano anaa nnuru afoforo ho a, fa nnuru no din, dodow, ɔhyew ne bere tenten a wɔde di dwuma no ma ansa na woapene ade no so.

Sɛnea Wobɛpaw HI a Ɛfata PS krataa

Nsɛm Bɛn na Ɛsɛ sɛ Wode Ma Wɔ Nsɛm a Wɔafa Ka Ho?

Nsɛmmisa a Wɔtaa Bisa Fa HI PS krataa

Dɛn na HIPS gyina hɔ ma?

HIPS gyina hɔ ma High Impact Polystyrene. Ɛyɛ polystyrene a wɔayɛ no foforo sɛnea ɛbɛyɛ a ɛbɛyɛ den kɛse na ɛko tia mpaapaemu sen General Purpose Polystyrene a wɔtaa de di dwuma.

So High Density Polystyrene ne HIPS yɛ pɛ ?

Dabi HIPS kyerɛ Polystyrene a Ɛwɔ Nkɛntɛnso Kɛse. Wɔde asɛmfua polystyrene a ɛyɛ den nso di dwuma wɔ gua so ma E PS anaa XPS foam nneɛma bi a ɛyɛ den, enti ɛsɛ sɛ wɔde HIPS krataa so nsɛm a ɛyɛ den HIPS nneɛma din a ɛteɛ no kyerɛ.

So saa ade yi yɛ E PS anaa XPS insulation board?

Dabi Saa ade yi yɛ den HIPS / PS krataa so nsɛm a mprempren ne kɛse bɛyɛ 0.2mm kosi 6mm. Ɛnyɛ E PS anaa XPS foam thermal-insulation board.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Mprempren HSQY nkyerɛkyerɛmu no kata bɛyɛ 0.2mm kosi 6mm. Ɛsɛ sɛ wosi so dua sɛ ɛwɔ hɔ pɛpɛɛpɛ sɛnea ne tɛtrɛtɛ, kɔla, ɔfasu ne sɛnea wɔde di dwuma te.

Dɛn ne HIPS krataa so nsɛm trɛw a ɛsen biara?

Mprempren nneɛma ho nsɛm no kyerɛ ntrɛwmu a ɛkɔ bɛyɛ 1600mm ma nsɛm a wɔapaw.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Mprempren nneɛma ho nsɛm no kyerɛ kɔla fitaa, tuntum ne kɔla ahorow a wɔayɛ no sɛnea wɔpɛ.

So HIPS krataa so nsɛm betumi ayɛ thermoformed?

Aane. Thermoforming ne vacuum forming yɛ HIPS dwumadie titire. Adwumayɛ a etwa to no gyina ne kɛse, ɔhyew tebea, nkuku geometry ne forming bun so.

So wobetumi HIPS krataa so nsɛm adi dwuma ama nneɛma a wɔde kyekyere nneɛma tray ahorow a wɔde di dwuma ?

Aane. Wobetumi ayɛ HIPS grades a ɛfata thermoformed ayɛ tray ahorow a wɔde di dwuma , inserts ne ahobammɔ packaging. Nneɛma a wɔde kyekyere nneɛma a wɔahyɛ ho mmara no hwehwɛ sɛ wosi nneɛma a wɔde ahyɛ mu no dodow ne nkrataa a ɛfata no so dua.

So wobetumi atintim HIPS krataa so nsɛm ?

Aane. Wobetumi de HIPS abasobɔde a ɛfata adi dwuma ama screen, dijitaal ne akwan foforo a wɔfa so tintim. Ɛsɛ sɛ wɔsɔ ink a ɛbata ho, nea wɔde awie ne ayaresa a ɛho hia hwɛ ansa na wɔayɛ.

So HIPS krataa so nsɛm betumi ayɛ CNC mfiri?

Aane. HIPS betumi atwitwa, atutu, afa kwan, atwa die na CNC mfiri a wɔde nnwinnade ne dwumadie tebea a ɛfata adi dwuma.

So wobetumi de HIPS adi dwuma ama mfiri liners?

Aane. Wɔde mfiri ne frigye liners asi hɔ HIPS dwumadie akwankyerɛ. Sɛnea ɛfata pɛpɛɛpɛ no gyina ahwehwɛde ahorow a wɔde yɛ, ɔhyew, nnuru, sɛnea ɛte ne nneɛma a wɔapaw no so.

So wobetumi de HIPS adi dwuma ama kar afã horow?

Wobetumi asusuw HIPS abasobɔde ahorow a wɔapaw no ho ama kar mu dwumadie a ɛnyɛ nhyehyɛe. Ɛsɛ sɛ wɔhyɛ ɔhyew, nkɛntɛnso, hua, mframa bɔne ne ogya a ɛtumi hyew ho ahwehwɛdeɛ a ɛfa kar pɔtee bi ho no so dua ansa na wɔapene nneɛma so.

So HIPS fata sɛ wɔde di dwuma wɔ abɔnten?

Standard HIPS na wɔde di dwuma titiriw wɔ dan mu. Abɔnten so a wɔbɛda no adi bere tenten no hwehwɛ sɛ wosi UV a ɛyɛ den, wim tebea ne nneɛma a wɔapaw no so dua.

Nsonsonoe bɛn na ɛda HIPS ne GPPS ntam ?

HIPS yɛ nea wɔde rɔba ayɛ nsakraeɛ na ɛtaa yɛ nea ɛnyɛ hann, a ɛyɛ den kɛseɛ sene GPPS . GPPS taa yɛ nea ɛda adi na ɛhyerɛn nanso sɛ wɔde toto ho a, ɛyɛ mmerɛw.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Yɛsrɛ wo fa dwumadie no, ne kɛseɛ, krataa so nsɛm nsusuiɛ, kɔla, ɔfasuo awie, forming anaa printing ahwehwɛdeɛ, adwumayɛ ho ahwehwɛdeɛ soronko, dodoɔ ne baabi a worekɔ no ma.

Nneɛma a Wɔde Gu Mu & Wɔde Kɔma

HIPS Ɛsɛ sɛ wɔbɔ krataa so nsɛm s ho ban sɛdeɛ wɔn kɛseɛ, ne kɛseɛ ne ne soro ahwehwɛdeɛ teɛ na ama wɔatew nsensaneeɛ, efĩ, anoano asɛe ne kankyee so wɔ berɛ a wɔde sie ne amanaman ntam akwantuo mu.

HSQY Plastic Kuw a Wɔde Kyerɛkyerɛ

Adansedi nkrataa & Nwoma

Ɛsɛ sɛ wɔsi adansedie nkrataa a ɛwɔ hɔ ne mfiridwuma ho nkrataa so dua ma HIPS abasobɔdeɛ pɔtee ne akwammisa a wɔahyɛ da ayɛ ansa na wɔapene ahyɛdeɛ so.