HI PS krataa ma Model Making & Nhwɛsode ahorow

HI PS krataa ma Model Making & Nhwɛsode ahorow

HSQY HIPS krataa so nsɛm yɛ hare, ɛko tia nsunsuansoɔ na ɛnyɛ den sɛ wɔbɛyɛ ama adansiɛ mfonini, nsenia nhwɛsoɔ, nhwɛsoɔ, mock-ups, ɔyɛkyerɛ ne thermoformed afã ahodoɔ, a ne kɛseɛ yɛ 0.2-6mm ne kɔla a wɔahyɛ da ayɛ.

High Impact Polystyrene, a wɔtaa frɛ no HIPS anaa styrene krataa so nsɛm , yɛ polystyrene a wɔde rɔba ayɛ mu nsakrae a ɛma ɛyɛ den kɛse sen gyinapɛn GPPS bere a ɛda so ara yɛ mmerɛw sɛ wobetwitwa, ayɛ, abɔ, ayɛ paint, atintim ne thermoform.

Wɔ model manufacturers, architectural studios, prototype workshops ne industrial designers fam no, HIPS de nkabom a mfaso wɔ so a ɛyɛ nea emu duru sua, rigidity, surface quality ne sikasɛm mu fabrication ma. HSQY mprempren kwan no kata bɛyɛ 0.2mm kosi 6mm kɛse ne ne tɛtrɛtɛ a ɛkɔ 1600mm.

HIPS Model Making Krataa Nkyerɛkyerɛmu

Specification Hyɛ no nsow: Ɛsɛ sɛ wɔsi thickness, rigidity, kɔla, surface finish, dimensions ne processing performance so dua sɛdeɛ HIPS grade pɔtee ne model-making anaa prototype application teɛ.

Dɛn Nti na Wode HIPS Di Dwuma Ma Model Making?

HIPS yɛ nea wɔde di dwuma kɛse ma nhwɛsode yɛ efisɛ wobetumi adan no ayɛ no nnua a ɛyɛ tratraa, akorade a ɛyɛ kurukuruwa, adansi mpampam, afɛfɛde a ɛwɔ soro ne nneɛma a ɛkɔ akyiri denam akwan a ɛyɛ tẽẽ a wɔfa so yɛ no so.

Sɛ wɔde toto polystyrene a ɛyɛ brittle standard standard ho a, rɔba-sesa HIPS ma toughness kɛse bere a wɔretwitwa, adi dwuma na wɔaboaboa ano. Eyi ho wɔ mfaso titiriw bere a ɛsɛ sɛ wɔde prototype components no hyɛ mu mpɛn pii, wotu mu, wɔkyekyere anaasɛ wɔsan yɛ ho adwuma no.

• Twitwa a ɛnyɛ den: Wobetumi de nsa anaa mfiri nnwinnade a ɛfata ayɛ HIPS a ɛyɛ tratraa ne nea ɛwɔ mfinimfini no ho adwuma ma ayɛ nsusuwii a ɛkɔ akyiri.

• Dimensional stability pa: Mfaso wɔ so ma flat panels, templates ne repeatable model components.

• Adansi a emu nyɛ duru: Ɛboa ma wotumi di adansi ne nkyerɛkyerɛmu ho mfonini akɛse ho dwuma.

• Smooth surface: Ɛfata ma mfonini, tintim, labeling ne decorative finishing ne nhyehyɛe ahorow a ɛne no hyia.

• Bondable: Wobetumi de bonding nhyehyɛe a ɛne ne ho hyia adi dwuma de aboaboa layered models ne prototype structures ano.

• Thermoformable: Wobetumi ayɛ HIPS a ɛyɛ hyew no ayɛ no curved shells, enclosures ne three-dimensional model components.

• Nneɛma a ɛyɛ den pii: Wobetumi de gauges ahorow abom wɔ model biako mu de ayɛ nwoma a ɛyɛ tratraa, emu mpampam ne structure panels a ɛyɛ den.

HI PS krataa ma Nneɛma a Wɔde Yɛ Adwuma

Wɔn a wɔyɛ adansi ho mfonini no betumi de HIPS krataa so nsɛm s a ɛyɛ tratraa adi dwuma de ayɛ afasu, anim, ɔdan atifi ntama, emu mpaapaemu, asɛnka agua ne nneɛma a wɔde asiesie.

Wobetumi atwitwa nneɛma no ayɛ no geometric nsusuwii ahorow a wotumi san yɛ bio na wɔaboaboa ano ayɛ no adan a wɔayɛ no ntoatoaso. White HIPS ho wɔ mfaso titiriw wɔ baabi a akyiri yi wɔbɛyɛ adansi ho mfonini a wɔawie no ho adwini anaasɛ wɔde bɛkyerɛ wɔ afã biako a wɔde awie no mu.

Wɔ adansiɛ nhwɛsoɔ akɛseɛ ho no, ɛsɛ sɛ wɔpaw ne kɛseɛ sɛdeɛ span a wɔanhyɛ no den, flatness a wɔhwehwɛ ne emu structure support dodoɔ a wɔde di dwuma wɔ model no mu teɛ.

HI PS krataa ma Scale Nhwɛsode ahorow

Scale-model manufacturers betumi de HIPS adi dwuma ama nipadua panels, kar afã horow, nketewa structures, mfiri models, dioramas ne layered surface details.

Thin krataa so nsɛm s fata ma panel nketewa ne nsɛm a ɛyɛ fɛ, bere a nneɛma a ɛyɛ den betumi ama mmoa ama frame, nnyinaso ne structure components.

Baabi a adwuma bi hwehwɛ sɛ wɔyɛ aguadi mu nneɛma mpɛn pii sen sɛ wɔde ankorankoro anigyede bedi dwuma no, ɛsɛ sɛ adetɔfo kyerɛ nsusuwii a wɔawie, dodow a ɛwɔ mfonini biara mu ne ɔkwan a wɔfa so twa sɛnea ɛbɛyɛ a wobetumi asusuw nneɛma a wonya ho.

HI PS krataa ma Nneɛma a Wɔde Yɛ Nhwɛsode

HIPS ho wɔ mfasoɔ ma nneɛma a wɔyɛ no mfitiaseɛ ɛfiri sɛ adwumfo tumi yɛ adan, panels, covers, tray ahorow a wɔde di dwuma ne visual prototypes ntɛmntɛm ansa na wɔde wɔn sika ahyɛ nnwinnadeɛ a wɔde yɛ nneɛma mu.

Wobetumi atwitwa krataa so nsɛm s a ɛyɛ tratraa na wɔde abɔ mu ayɛ no adaka-su nhwɛsode, bere a wobetumi de thermoforming anaa vacuum forming adi dwuma bere a adwene no hwehwɛ sɛ wɔde nneɛma a ɛyɛ kurukuruwa anaasɛ akorade a ɛwɔ afã abiɛsa.

Wɔ nhwɛsoɔ a ɛyɛ adwuma a wɔde adesoa a ɛho hia, ɔhyew anaa nnuru ahyɛ mu no, ɛsɛ sɛ wɔhwehwɛ nneɛma a wɔde yɛ adwuma a etwa toɔ a wɔhwehwɛ no mu wɔ ɔkwan soronko so. HIPS nhwɛsoɔ a ɛfata wɔ aniwa so no nkyerɛ sɛ HIPS ne mfiridwuma mu nneɛma a ɛfata ma ade a wɔyɛ no dodoɔ no ara.

HI PS krataa ma Mock-Ups & Nkyerɛkyerɛmu Nhwɛsode

Mpɛn pii no, nkyerɛkyerɛmu a wɔde yɛ mfonini no hwehwɛ sɛ wonya baabi a ɛho tew a wobetumi atwitwa, de anhwea ayɛ, ayɛ ho adwini na wɔaboaboa ano ntɛmntɛm. HIPS betumi aboa saa ahwehwɛde ahorow yi bere a ɛda so ara yɛ hare na ɛnyɛ den sɛ wɔbɛyɛ sen mfiridwuma mu plastic pii.

Nneɛma a wɔtaa de di dwuma ne mfiridwuma-nsusuwii a wɔde yɛ mfonini, ɔyɛkyerɛ nhwɛsode, nneɛma a wɔde kyekyere nneɛma ho adwene, mfiri ho adwene, nneɛma a wɔde abɔ ho ne ɔyɛkyerɛ nhwɛso.

Sɛnea Wobɛpaw HIPS Thickness ama Model Making

Eyinom yɛ akwankyerɛ a wɔde paw nneɛma wɔ ɔkwan a ɛkɔ akyiri so. Ne kɛse a ɛfata gyina component size, unsupported span, model scale, a wɔpɛ sɛ ɛyɛ mmerɛw, ɔkwan a wɔfa so twa ne rigidity a wɔhwehwɛ so.

Twitwa HI PS krataa ma Models & Prototypes

Ɔkwan a ɛfata a wɔfa so twa no gyina krataa so nsɛm kɛseyɛ, pɛpɛɛpɛyɛ a wɔhwehwɛ ne dodow a wɔyɛ so titiriw.

Mfitiaseɛ nneɛma ho nsɛm nso twe adwene si laser twa. Baabi a wosusuw laser dwumadie ho no, ɛsɛ sɛ wɔde HIPS grade pɔtee no hwɛ nnwinnadeɛ a ɛne ne ho hyia, ogya ho asiane, wusiw, mframa ne finished-edge quality hwɛ ansa na wɔayɛ. Mpɛn pii no, ɛyɛ mmerɛw sɛ wobedi mfiri a wɔde twa nneɛma so ama mfoniniyɛ ho dwumadie.

Bonding HIPS Nhwɛsoɔ Nneɛma a Wɔde Yɛ Adwuma

Model yɛfo taa boaboa HIPS afã horow ano ma ɛyɛ afasu a wɔayɛ no ntoatoaso, nnua, adan ne nhwɛsode adan a ɛyɛ den. Wobetumi asusuw nneɛma a wɔde nkata ade a ɛne ne ho hyia anaasɛ solvent-bonding nhyehyɛe ahorow mu sɛnea nkwaa no nhyehyɛe ne sɛnea ɛho hia te.

Ɛsɛ sɛ wɔde ade ankasa no sɔ bonding adwumayɛ hwɛ efisɛ colorants, surface condition, adhesive chemistry ne joint geometry betumi anya ahoɔden a etwa to so nkɛntɛnso.

Mfoniniyɛ HIPS Nhwɛsode & Nhwɛsode

Wobetumi ayɛ HIPS soro a ɛyɛ torotoro no ho adwini na wɔawie ama adansi ho mfonini, nkyerɛkyerɛmu nhwɛso ne nneɛma a wɔde kyerɛ bere a wɔde nneɛma a wɔde kata so a ɛne no hyia di dwuma no.

Ɛsɛ sɛ wɔsɔ asase ani, primer a ɛne ne ho hyia ne paint chemistry hwɛ ansa na wɔayɛ. Nneɛma a wɔde siw ano a ano yɛ den betumi aka polystyrene, enti ɛsɛ sɛ wodi kan si nhyehyɛe a wɔde kata so no tom wɔ nhwɛsode a ɛyɛ ananmusifo so.

Ntintim & Agyiraehyɛde HI PS krataa

HIPS betumi aboa mfonini a wɔatintim, agyiraehyɛde ahorow, nsenia, nkyerɛwde ne afɛfɛde a wɔde wie ama mfonini ahorow, nhwɛsode panels, ɔyɛkyerɛ ne nkyerɛkyerɛmu afã horow.

Ink adhesion gyina soro wie, tintim kwan, ink chemistry ne curing tebea horow. Ɛsɛ sɛ wɔsɔ nneɛma a wɔde tintim nhoma no hwɛ wɔ nneɛma ankasa no so ansa na wɔadan no kɛse.

Thermoforming HIPS ma Nhwɛsode Afã horow

HIPS betumi ayɛ hyew na wɔayɛ no afã abiɛsa prototype afã horow a flat- krataa so nsɛm fabrication ntumi nsan nyɛ geometry a wɔhwehwɛ no.

Prototype dwumadie a wɔtaa de di dwuma ne enclosure shells, appliance concepts, model kar nipadua, product housings, tray ahorow a wɔde di dwuma , curved covers ne display components.

White vs. Black HIPS ma Nhwɛsode a Wɔyɛ

HIPS vs. GPPS ma Model Making

HIPS vs. ABS ma Nhwɛsode Nhwɛsode

HI PS krataa no Dwumadi Afoforo.

Ɛwom sɛ saa adeɛ krataafa yi twe adwene si nhwɛsoɔ a wɔyɛ ne nhwɛsoɔ so deɛ, nanso wɔde HIPS nso di dwuma wɔ nneɛma a wɔde kyekyere, nneɛma a wɔde kyerɛ, nsɛnkyerɛnneɛ, mfiri no afã ne nneɛma foforɔ a wɔayɛ no thermoformed anaa fabricated mu.

Aduan a wɔde di nkitaho, aduruyɛ, sterilization, kar anaa nneɛma titiriw afoforo a wɔahyɛ ho mmara hwehwɛ sɛ wosi grade pɔtee ne mfiridwuma ho nkrataa a ɛfata so dua. Ɛnsɛ sɛ wɔfa no sɛ standard model-making HIPS no fata ma saa dwumadie no ara kwa.

Nsɛm Bɛn na Ɛsɛ sɛ Wode Ma Wɔ Nsɛm a Wɔafa Ka Ho?

Nsɛmmisa a Wɔtaa Bisa Fa HI PS krataa ho ma Model Making

Dɛn ne HIPS krataa so nsɛm ?

HIPS gyina hɔ ma High Impact Polystyrene. Ɛyɛ rɔba-sesa polystyrene a wɔayɛ sɛ ɛbɛma toughness kɛse sen standard GPPS bere a kura rigidity pa ne fabrication adwumayɛ.

Dɛn nti na wɔde HIPS di dwuma de yɛ nhwɛsode?

HIPS yɛ hare, ɛyɛ den na ɛnyɛ den koraa sɛ wɔbɛtwa, abɔ, ayɛ paint ne thermoform, na ɛma ɛyɛ mfasoɔ ma adansiɛ nhwɛsoɔ, nsenia nhwɛsoɔ, nhwɛsoɔ ne mock-ups.

Nneɛma a ɛyɛ den bɛn na ɛfata ma adansi ho mfonini ahorow?

Wobetumi de 0.2-0.5mm krataa so nsɛm s a ɛyɛ tratraa adi dwuma ama nsɛm a ɛyɛ fɛ ne nea ɛwɔ soro, bere a 0.5-1mm ho wɔ mfaso ma general model panels. Nneɛma akɛse a wɔde yɛ dan no betumi ahwehwɛ 1mm anaa nea ɛboro saa krataa so nsɛm a egyina ne kɛse ne mmoa so.

Thickness range bɛn na HSQY de ma?

Mprempren ade no ho nkyerɛkyerɛmu no fa bɛyɛ 0.2mm kosi 6mm.

Dɛn ne krataa so nsɛm trɛw a ɛsen biara?

Mprempren ade no ho nkyerɛkyerɛmu no kyerɛ ntrɛwmu a ɛkɔ bɛyɛ 1600mm.

Kɔla ahorow bɛn na ɛwɔ hɔ?

Mprempren ade no ho nkyerɛkyerɛmu no kyerɛ kɔla fitaa, tuntum ne kɔla ahorow a wɔayɛ no sɛnea wɔpɛ.

So wobetumi de sekan atwitwa HIPS krataa so nsɛm a ɛyɛ tratraa?

Wobetumi de nsa nnwinnade a ɛfata abɔ HIPS a ɛyɛ tratraa no nkontaa na wɔatwitwa a egyina ne kɛse so. Nneɛma a ɛyɛ den no fata yiye ma saw, routers, die cutting anaa CNC machining.

So HIPS krataa so nsɛm betumi ayɛ CNC mfiri?

Aane. HIPS betumi ayɛ driled, routed na CNC machined denam nnwinnade a ɛfata ne processing parameters so.

So wobetumi de gluu abɔ HIPS krataa so nsɛm ?

Wobetumi de adhesives ne bonding systems a ɛne ne ho hyia adi dwuma de aboaboa HIPS afã horow ano. Ɛsɛ sɛ wɔde krataa so nsɛm grade ankasa no sɔ bond ahoɔden ne sɛnea ɛte wɔ soro no hwɛ.

So wobetumi ayɛ HIPS krataa so nsɛm ho mfonini?

Aane. HIPS wobetumi de aduru a wɔde kata so a ɛne no hyia ayɛ ho adwini. Ɛsɛ sɛ wɔsɔ paint, primer ne nneɛma a wɔde tew ho hwɛ efisɛ nnuru a wɔde yɛ aduru a ano yɛ den betumi aka polystyrene.

So HIPS krataa so nsɛm betumi ayɛ thermoformed?

Aane. HIPS yɛ nea wɔde di dwuma kɛse ma thermoforming ne vacuum forming. Ɛsɛ sɛ wɔpaw mfiase mu duru sɛnea nkuku geometry ne ɔfasu a wɔawie a wɔhwehwɛ no mu duru te.

So wobetumi de HIPS adi dwuma ama prototype adan?

Aane. HIPS betumi ayɛ anaasɛ thermoformed ayɛ no visual prototype adan, nkataso ne enclosures. Ɛsɛ sɛ wɔhwehwɛ dwumadie-adwumayɛ ahwehwɛdeɛ mu wɔ ɔkwan soronko so wɔ baabi a nhwɛsoɔ no wɔ ɔhyew, adesoa anaa nnuru kɛseɛ mu.

Nsonsonoe bɛn na ɛwɔ HIPS ne GPPS ntam ma model yɛ?

HIPS taa yɛ opaque na ɛyɛ den, na ɛma ɛyɛ nea mfaso wɔ so ma fabricated structural ne formed model components. GPPS taa yɛ nea emu da hɔ na ɛfata kɛse bere a ɛho hia sɛ wɔyɛ no pefee.

So wobetumi atwa HIPS laser?

Mfitiase HSQY ade ho nsɛm no kyerɛw laser twa sɛ adeyɛ a ebetumi aba. Ɛsɛ sɛ wɔde nneɛma pɔtee no hwɛ sɛnea nnwinnade no hyia, mframa a ɛkɔ mu, ogya ho asiane, wusiw ne anoano su pa ansa na wɔayɛ; wɔtaa pɛ mfiri a wɔde twa ade ma nhwɛsode a wɔyɛ no daa.

So standard HIPS fata ma aduruyɛ anaa sterililizable models?

Ɛnsɛ sɛ wɔde standard model-making HIPS di dwuma ara kwa sɛ aduruyɛ-grade anaa sterilization-compatible material. Aduruyɛ adwuma hwehwɛ sɛ wosi resin grade pɔtee, ɔkwan a wɔfa so sterilization ne nkrataa a ɛfata so dua.

Dɛn ne MOQ no?

Mprempren ade no ho nkyerɛkyerɛmu no kyerɛ dodow a wɔkra a ɛba fam koraa a ɛyɛ kilogram 1000. Ɛsɛ sɛ wosi sɔhwɛ anaa nhwɛsode ahwehwɛde ahorow so dua wɔ ɔkwan soronko so.

Bere bɛn na wɔde bɛkɔ?

Mprempren ade no ho nkyerɛkyerɛmu no kyerɛw bɛyɛ nnafua 7-15 wɔ sika a wɔde asie akyi, a egyina ahyɛde a wɔahyɛ no den ne nhyehyɛe a wɔayɛ no so.

Nsɛm bɛn na ɛsɛ sɛ mede ma na ama wɔafa asɛm bi aka?

Yɛsrɛ sɛ fa model anaa prototype dwumadie, ne kɛseɛ, krataa so nsɛm nsusuiɛ, kɔla, ɔkwan a wɔfa so twa, bonding anaa painting ahwehwɛdeɛ, thermoforming ho nsɛm wɔ baabi a ɛfata, dodoɔ ne baabi a wɔrekɔ ma.

Nneɛma a Wɔde Gu Mu & Wɔde Kɔma

Mprempren nneɛma ho nsɛm no kyerɛ ahobammɔ nhwɛsode a wɔde kyekyere nneɛma, palletized bulk packaging ne FOB, CIF anaa EXW delivery terms. Ɛsɛ sɛ wɔbɔ nkratafa ho ban na ɛnsɛe, efĩ ne anoano a ɛsɛe bere a wɔde sie ne amanaman ntam akwantuo no.

HSQY Plastic Kuw a Wɔde Kyerɛkyerɛ

HSQY Plastic Kuw no hyia plastic- krataa so nsɛm a wɔkyekyɛ, model ne prototype ayɛfo, thermoformers, display companies ne mfiridwuma mu adetɔfo wɔ amanaman ntam nnwumayɛbea ahorow mu.

Adansedi nkrataa & Nwoma

Mprempren afiri krataafa no kyerɛ SGS ne ISO 9001:2008. Ɛsɛ sɛ adetɔfo si so dua sɛ adansedi krataa anaa sɔhwɛ krataa a ɛwɔ hɔ no fa HIPS abasobɔde pɔtee ne dwumadie a wɔpɛ sɛ wɔde di dwuma no ho ansa na wɔapene so wɔ mfiridwuma mu.

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de HIPS , GPPS ne plastic krataa so nsɛm nneɛma afoforo ma wɔn a wɔyɛ mfonini, prototype adwumayɛbea, thermoformers, display manufacturers, packaging companies ne industrial fabricators. Wobetumi aka thickness, krataa so nsɛm nsusuwii, kɔla ne downstream fabrication ahwehwɛde ho asɛm sɛnea adwuma no te.

Polystyrene Plastik krataa s ma Model Making Aguadeɛ Nkyerɛkyerɛmu

HSQY Plastic Group no polystyrene plastic krataa so nsɛm s, a high impact polystyrene ( HIPS ) ka ho, yɛ thermoplastic nneɛma a ɛyɛ adwuma pii a wɔayɛ ama nhwɛsoɔ a wɔyɛ, nneɛma a wɔde kyekyere, ne nsɛnkyerɛnneɛ. Ɛde mfiri ahoɔden a ɛkyɛn so, ɛyɛ mmerɛw sɛ wobedi ho dwuma, ne nea ɛko tia nkɛntɛnso kɛse ma, saa krataa so nsɛm s a emu yɛ hare, ɛho ka sua yi yɛ nea wotumi sesa no wɔ kɔla ne akɛse ahorow mu. Ɛyɛ papa ma B2B afɛfo a wɔwɔ nneɛma a wɔyɛ, adwini, ne nhwɛsode nnwuma mu a wɔrehwehwɛ ano aduru a wotumi de ho to so.

HI PS krataa Nsɛm a Wɔakyerɛkyerɛ mu

Nneɛma Titiriw a Ɛwɔ Polystyrene Krataa Mu

• High impact resistance ne rɔba modifiers na amma mpaapaemu

• Ɛnyɛ den sɛ wɔbɛyɛ: ɛboa laser twa, thermoforming, ne tintim

• Ɛyɛ hare na ɛyɛ den ma akwantu ne di a ɛho ka sua

• Nsu, acid a wɔayam, alkali, ne nsa ntumi nkɔ mu

• Smooth surface ma tintim a ɛkorɔn ne branding

Di Yɛn Di nkitaho na woanya Quote

Plastik krataa dwumadie ma Prototyping

Yɛn polystyrene krataa so nsɛm s yɛ papa ma B2B afɛfoɔ wɔ nnwuma te sɛ:

• Model making: Prototypes, sukuu nnwuma, ne nsaanodwuma

• Nneɛma a wɔde kyekyere nneɛma: Trays, clamshells, ne blister packs

• Nsɛnkyerɛnne: Nsɛnkyerɛnne a wɔde kyerɛ wɔ aguadidan mu, POP nneɛma a wɔde kyerɛ, nneɛma a wɔde kyerɛ

• Kar: Mfinimfini trim, dashboards, ahobammɔ nkataso

• Nneɛma a wɔde di dwuma: Fridge mu nneɛma, agode afã horow

• Aduruyɛ: Sterilizable tray ahorow a wɔde di dwuma , nnwinnade a wɔde kata so

Nneɛma a wɔde kyekyere ne nea wɔde kɔma Polystyrene Krataa

• Nhwɛsode a Wɔde Gu Nneɛma Mu: Wɔde sini a ɛbɔ ho ban abɔ mu, na wɔde ahyɛ nnaka mu.

• Bulk Packaging: Nkratafa a ɛwɔ pallets so, a wɔde stretch film abɔ ho.

• Pallet Packaging: Standard export pallets, customizable biara akraman ahwehwɛde.

• Container Loading: Wɔayɛ no yie ama 20ft/40ft containers, hwɛ hu sɛ wɔde bɛkɔ baabiara a ahotɔ wɔ.

• Nsɛm a Wɔde Kɔma: FOB, CIF, EXW.

• Lead Time: 7-15 nna akyi deposit, gyina order dodow.

  
  

Nsɛmmisa a Wɔtaa Bisa (FAQ) Fa Polystyrene Plastik krataa s

So Polystyrene Plastik krataa s yɛ Ahobammɔ ma Model Making?

Yiw, yɛn HIPS krataa so nsɛm s no yɛ ahobammɔ ma model yɛ, ɛma fabrication a ɛnyɛ den na ɛtra hɔ kyɛ ma crafting pɛpɛɛpɛ.

So Metumi Ayɛ Polystyrene Nkratafa a Wɔde Yɛ Nhwɛsode?

Yiw, yɛde ne kɛse, ne trɛw, ne kɔla ahorow a wotumi sesa ma sɛnea ɛbɛyɛ a wubedi w’adwuma no ahiade pɔtee ho dwuma.

Adansedie Bɛn na Wo Polystyrene a Ɛwɔ Nkɛntɛnso Kɛse (HIPS) Nkratafa Wɔ?

Yɛn krataa so nsɛm s no yɛ nea SGS ne ISO 9001:2008 agye atom, a ɛhwɛ ma ɛyɛ papa na wotumi de ho to so.

Dɛn ne Polystyrene Plastik krataa s dodow a ɛsua koraa (MOQ)?

MOQ no yɛ 1000 kg, a ɛwɔ nsakraeɛ ma nhwɛsoɔ nketewa anaa sɔhwɛ ahyɛdeɛ.

Bere tenten ahe na Polystyrene Nkratafa a Wɔde Kɔma?

Delivery gye 7-15 nna akyi deposit, gyina order kɛse ne destination.

Ɛfa HSQY Plastic Kuw ho

Ɛnam bɛboro mfeɛ aduonu osuahu nti, HSQY Plastic Group yɛ adwumayɛbea 8 na wɔgye wɔn di wɔ wiase nyinaa wɔ plastic ano aduru a ɛkorɔn ho. SGS ne ISO 9001:2008 na yɛagye atom, yɛyɛ yɛn ho titiriw wɔ nneɛma a wɔayɛ ama nneɛma a wɔde kyekyere nneɛma, adansi, ne nnuruyɛ nnwuma mu. Di yɛn ho nkɔmmɔ na yɛne wo nsusuw wo adwuma no ahwehwɛde ahorow ho!

ADIDA

ADANSESƐM A WƆDE DI DWUMA

Di Yɛn Di nkitaho na woanya Quote