Nutrenu Film na PET / PE Tray

Nukae Nye Nutrenu Film na PET/PE Trays?

Nutrenu film na PET/PE agbawo nye nutsyɔnu film si woate ŋu atre dzoxɔxɔ nu si wowɔ be woatsɔ axe agba siwo wotsɔ dzoxɔxɔ wɔe siwo zãa PET abe xɔtuɖaŋu ene eye PE abe nuɖuɖu ƒe kadodo alo nutrenu ƒe ƒuƒoƒo ene.

PET ƒuƒoƒo si le tray la me naa sesẽ, didime ƒe liƒo kple nusi wowɔ ƒe dzedzeme, esime PE ƒuƒoƒoa wɔa dzoxɔxɔ-tre flange. PET/PE ƒe nutsyɔnu film si sɔ la blana ɖe PE ƒe nutrenu sia ŋu ne wotsɔ dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si dzi woɖuna to tray nutrenu mɔ̃ dzi.

HSQY naa PET / PE tray nutrenu films kple easy-peel, lock-seal, anti-fog, high-mɔxenu, puncture-tsitretsitsi kple tata tiatia. Wozãa sinima siawo tsɔ wɔa lã fafɛ, koklolã, ƒumelã, sabala, nusiwo wowɔ, nyinotsibabla, abolomenuwo, nuɖuɖu viviwo, nuɖuɖu siwo wofa tsikpe me kple nuɖuɖu siwo woɖa xoxo.

Woɖo hatsotso sia koŋ na PET/PE-gbadzɛwo kple agba bubu siwo ƒe nutrenu si sɔ si wotu ɖe PE dzi. Mele be woasusui be film ɖeka atre nu nyuie ɖe mono-PET, rPET, PP, PS alo CPET tray ɖesiaɖe ŋu o.

Nukae Nye PET/PE Tray?

PET/PE agba nye nuɖuɖugba si wotsɔ laminated alo coextruded si me wotsɔa PET ƒe ƒuƒoƒo sesẽ aɖe kple polyethylene ƒe nutrenu ƒokpli ƒoa ƒui.

PET naa xɔtuɖoɖo ƒe ŋusẽ vevitɔ kple eme kɔna, gake PE ya naa dzoxɔxɔ ƒe nutrenu kple tsi ƒe tsitretsitsi nyona ɖe edzi. Zi geɖe la, wotsɔa PE-kplu la dana ɖe akpa si nuɖuɖua ka ɖe edzi kple le tray la ƒe axadzi ale be nutsyɔnu film si sɔ kple PE nate ŋu awɔ nutrenu si le dedie.

Ele be nuƒlelawo natsɔ tray ƒe wɔwɔme bliboa ana alo aɖo tray ƒe kpɔɖeŋu ŋutɔŋutɔwo ɖa hafi abia be woaɖo aɖaŋu mamlɛtɔ le nutrenu-film ŋu.

PET/PE Tray Nutrenu Film ƒe Nɔnɔmewo

Tabla si gbɔna la ƒo nu tso HSQY PET/PE lidding-film tiatia siwo bɔ ŋu kpuie. Nu mamlɛtɔ ƒe nɔnɔmewo nɔ te ɖe tray, nuɖuɖu ƒe nuwɔna, nubablɛ ƒe dɔwɔnuwo, ʋuʋu mɔnu kple mɔxenu ƒe nudidiwo dzi.

Titrime nye nya ɖeka ko. Seal ƒe ŋusẽ, peel ƒe nuwɔna, mɔxenu ƒe dɔwɔwɔ kple mɔ̃ ƒe dɔwɔwɔ nyuie hã kpɔa ŋusẽ ɖe resin ƒe wɔwɔme, layer mama, lamination ƒe nyonyome kple nutrenu ƒe nɔnɔmewo dzi.

PET / PE Nutsyɔnu Film Layer Dɔwɔɖoɖo

Menye PET/PE ƒe nutsyɔnu film ɖesiaɖe mee ƒuƒoƒo siawo katã le o. Standard easy-peel film ate ŋu anye PET/PE xɔtutu bɔbɔe wu, gake MAP film ya ate ŋu abia mɔxenu kple kaƒoƒo ƒe ƒuƒoƒo bubuwo.

Viɖe Vevi Siwo Le PET/PE Tray Lidding Film Ŋu

• Nutrenu si ŋu kakaɖedzi le ɖe PE ƒe anyigba dzi: Wotrɔ asi le PE nutrenu ƒe ƒuƒoƒoa ŋu be wòabla ɖe PET/PE traywo ƒe PE flange ŋu.

• Wokpɔa aŋɔ ƒe dɔwɔwɔ dzi: Aŋenu siwo woate ŋu aʋuʋu bɔbɔe ate ŋu aʋu nyuie evɔ womavuvu akpa alo atrɔ le agba me o.

• Nubablɛwo nu tutu sesĩe: Film siwo wotsɔa ga ƒoa nui naa nutrenu ƒe dedienɔnɔ geɖe wu na tsiwo kple nuɖuɖu siwo sea ʋuɖoɖo.

• Adzɔnuwo ƒe dzedzeme gã: PET ƒe gotagome ƒuƒoƒo siwo me kɔ naa keklẽ kple nukpɔkpɔ le gaglãgbe hena asitsaƒewo ɖeɖefia.

• Tiatia siwo tsia afu nu: Nuɖuɖu siwo wotsɔa fridzi wɔe ƒe hatsotsowo ate ŋu aɖe tsi si ƒona ɖe film la dzi dzi akpɔtɔ.

• Tiatia siwo me mɔxenu gãwo le: xɔtunu siwo wotu ɖe EVOH dzi ate ŋu ado alɔ nuɖuɖu siwo me oxygen le kple MAP ƒe bablawo.

• Puncture resistance: Woateŋu atrɔ asi le film gauge kple structure ŋu na lã, ƒumelãwo kple nusiwo ƒe nugbɔ ɖaɖɛwo.

• Ka si zɔna kabakaba: Woate ŋu ato film ƒe xɔtuɖoɖowo vɛ na dɔwɔnu siwo wotsɔ xea tray nu le wo ɖokui si.

• Agbalẽtata si wowɔ ɖe ɖoɖo nu: PET naa gota gome si sɔ na agbalẽtata ɖe megbe kple nɔnɔmetata siwo wokpɔ ta na.

• Agbalẽxatsaxatsa ƒe nɔnɔme siwo wowɔ ɖe ɖoɖo nu: Woate ŋu atsɔ agbalẽ xatsaxatsa ƒe kekeme, nu vevi ƒe lolome, agbalẽ xatsaxatsaa ƒe didime kple eƒe ʋuʋu ƒe mɔfiame asɔ kple mɔ̃a.

Nutrenu Film Ƒomeviwo na PET/PE Trays

Easy-Peel PET / PE Nutsyɔnu Film

Wotrɔ asi le PET/PE film si woɖena bɔbɔe be wòawɔ nutrenu si le dedie le eyɔyɔ, edzadzraɖo kple etsɔtsɔ me esime wòle mɔ ɖem na nuƒlela be wòaɖe nutsyɔnu la ɖa vivivi le lãgbalẽ ƒe tab me.

Nutrenua ate ŋu aʋu to nutrenua ƒe ʋuʋu ɖekae le nutrenu ƒe ƒuƒoƒoa me alo nutrenua ƒe ʋuʋu le film la kple agbaa dome. Mɔnu si wotia kpɔa ŋusẽ ɖe lãgbalẽ ƒe ŋusẽ, ʋuʋu ƒe dzedzeme, nusiwo susɔ kple film-vuvu ƒe nuwɔna dzi.

Kpɔ HSQY ƒe esiwo do ƒome kplii    PET/PE nutrenu film ƒe nuwɔna.

Lock-Seal PET / PE Nutsyɔnu Film

Lock-seal film wɔa kadodo sesẽ aɖe si me womate ŋu aŋe le o. Wotiae na agbalẽvi siwo me tsi ƒe sisi ƒe tsitretsitsi, asitɔtrɔ ƒe kpeɖodzi kple mama ƒe dedienɔnɔ le vevie wu asi ʋuʋu bɔbɔe.

Menye ɣesiaɣie ŋusẽtɔ wu nyona wu o. Nutrenu ƒe ŋusẽ si gbɔ eme ate ŋu ana film navuvu, tray-flange nagblẽ alo nuƒlela ƒe ʋuʋu sesẽ. Ele be woatsɔ nutrenu ƒe ŋusẽ asɔ kple alesi wozãe.

Anti-Fog PET / PE Nutrenu Film

Wozãa anti-fog lidding film ne anɔ eme be tsi si tso nuɖuɖu siwo wofa alo esiwo me dzoxɔxɔ le me la aƒo ƒu ɖe nuɖuɖua ƒe eme.

Nusi tsi tre ɖe afu ŋu la kakaa tsi si ƒo ƒu ɖe ƒuƒoƒo tsɛ aɖe si me kɔ tsɔ wu be wòana tsi suesuesue ɖekaɖekawo naxe mɔ na nusi wowɔ ƒe dzedzeme.

Kpɔ HSQY ƒe nyawo    anti-fog PET/PE nutrenu filmwo.

PET/EVOH/PE Film si me Mɔxenu Kɔkɔe Le

PET/EVOH/PE film si me mɔxenu gãwo le la lɔ EVOH ƒe ƒuƒoƒo aɖe ɖe eme be wòaɖe oxygen kple gas bubuwo ƒe kaka dzi akpɔtɔ. Wozãnɛ na nuɖuɖu siwo me oxygen sɔ gbɔ ɖo, yame ƒe babla siwo ŋu wotrɔ asi le kple nusiwo hiã be woalé gas ɖe te nyuie.

Kpɔ HSQY ƒe nyawo    EVOH-si wotu ɖe mɔxenu gã PET / PE nutrenu film.

Nutsyɔtsyɔ Film si Mete ŋu Tona O

Lã ƒe ƒuwo, ƒumelãwo ƒe gowo, nusiwo wofa tsikpe sesẽwo kple nuɖuɖu ƒe go ɖaɖɛwo ate ŋu atɔ film siwo wozãna ɖaa. Woate ŋu atia film ƒe titrime si lolo wu, nutrenu sesẽwo alo xɔtunu siwo ŋu wodo ŋusẽe na dɔ siawo wɔwɔ.

PET/PE ƒe Nutsyɔnu Film si wota

Film si wota ate ŋu aɖe dzesidenuwo, nusiwo wowɔ ƒe ŋkɔwo, nusiwo wotsɔ wɔe ŋuti nyatakakawo, nuɖaɖa ŋuti mɔfiamewo, barcodewo, QR-kɔdawo kple boblododo ƒe nɔnɔmetatawo afia.

Agbalẽtata ɖe megbe le film ƒe ƒuƒoƒo dome ate ŋu akpe ɖe ame ŋu wòakpɔ ink la ta tso abrasion kple nusi wowɔ ƒe kadodo tẽ me, le laminate ƒe nɔnɔme mamlɛtɔ nu.

Nutsyɔnu Film si me do le alo esi me gbɔgbɔ le

Atikutsetse kple amagbe tiatia aɖewo yia edzi gbɔa ya le wo babla vɔ megbe. Woate ŋu ahiã film siwo me do suesuesuewo le alo esiwo me gbɔgbɔ le be woada asɔ le oxygen kple carbon dioxide ƒe kaka me.

Film si me mɔxenu gãwo le bliboe mesɔ na nu yeyewo le eɖokui si o. Ele be woawɔ do ƒe wɔwɔme wòasɔ kple nusi wowɔ, nubablɛa ƒe lolome kple dzoxɔxɔ si wodzra ɖo.

Blewu Peel vs. Lock Nutrenu

PET/PE Tray Sealing Film ƒe dɔwɔwɔ

Lã Yeyewo Kple Koklolãwo ƒe Nubablɛwo

Woate ŋu azã PET/PE-gbadzɛwo kple nutsyɔnu filmwo na nyilã, haƒoƒo, alẽlã, lã ƒuƒu, soseti, koklolã ƒe akpa aɖewo, koklolã ƒe nuɖuɖuwo kple koklolã si wodzra ɖo.

Lã zazã ate ŋu abia be woaxe mɔ na oxygen si lolo, atsi tre ɖe afu ŋu, atsi tre ɖe tome, ɖiƒoƒo ƒe nutrenu kple absorbent pad.

Tɔmelãwo Kple Ƒumelãwo ƒe Nubablɛwo

Woate ŋu atia film siwo ŋu mɔxenu gã alo lock-seal le na tɔmelã ƒe lãgbalẽ, shrimp, shellfish, ƒumelã ƒe akpa aɖewo kple ƒumelã siwo woɖa.

Ele be film tiatia nabu gowo ƒe dodo, tsi ƒe dodo, kɔsɔkɔsɔ fafɛ ƒe dzoxɔxɔ kple nugbagbevi suesuesue siwo hiã le ƒumelã tɔxɛa me ŋu.

Salad Kple Amagbe Siwo Wodzra Ðo ƒe Nubablɛwo

Wozãa film siwo woɖena bɔbɔe kple esiwo tsia afu nu zi geɖe tsɔ wɔa salad siwo woɖa, amagbe siwo wotso, noodles fafɛwo, deli ƒe axawo kple axadzinuɖuɖu siwo wofa.

Atikutsetse Yeyewo Kple Agblemenukuwo ƒe Babla

Woateŋu azã PET/PE lidding film si me kɔ na atikutsetsewo, tomatos, atikutsetse siwo wotso, lãmi kple amagbewo.

Nusiwo wogbɔna ate ŋu abia be woakpɔ tsi si gena ɖe eme dzi alo woaɖe do suesuesuewo tsɔ wu be woawɔ xɔtunu si me mɔxenu gã aɖe le.

Notsi Kple Nuɖuɖu viviwo ƒe Nubablɛwo

Nusiwo wozãna dometɔ aɖewoe nye cheese ƒe akpa aɖewo, bɔta me nuɖuɖu siwo wotsɔa yogurt wɔe, puddings, mousse, nuɖuɖu vivi siwo wofa kple nuɖuɖu viviwo.

Abolomeƒe ƒe Nubablɛwo

Keke, abolomegba, kuki, amɔwɔnuwo kple abolomeƒe ƒe nuɖuɖu viviwo ate ŋu azã nutsyɔnu film siwo me kɔ alo esiwo wota hena ametakpɔkpɔ kple asitsatsa ƒe ɖeɖefia.

Nuɖuɖu Siwo Wodzra Ðo Ðe Fafa Me

PET/PE-gbadzɛwo ate ŋu alé pasta, bli-nuɖuɖuwo, lã si woɖa, amagbewo, nuɖuɖuvivinuwo kple nuɖuɖu siwo me nu vovovowo le siwo woɖo be woama le nufamɔ̃ me.

Ele be woaɖo kpe microwave alo dzoxɔxɔ ƒe dɔwɔwɔ dzi na tray-and-film package bliboa.

Nuɖuɖu Siwo Wobla Ðe Tsi Me

Woateŋu azã PET/PE film ƒe wɔwɔme tiatia aɖewo na lã si wofa tsikpe me, ƒumelãwo, nuɖuɖu siwo woɖa, amagbewo kple nuɖuɖu viviwo ne woɖo kpe dzoxɔxɔ si bɔbɔ ƒe asitɔtrɔ kple nutrenu ƒe blibonyenye dzi.

PET/PE Nutrenu Film na MAP Nubabla

Yame ƒe nubablɛ siwo ŋu wotrɔ asi le tsɔa ya siwo sɔ na nuɖuɖu ƒe tsakatsaka si dzi wokpɔna ɖɔlia ya si sɔ le agba me ƒe akpa gãtɔ hafi wotrea nutsyɔnu film la nu.

PET/PE film si wozãna ɖaa menaa mɔxenu si sɔ na MAP le eɖokui si o. Woate ŋu abia be woawɔ mɔxenu gã ƒe xɔtuɖoɖo si wotu ɖe EVOH dzi alo si ŋu woda asi ɖo le mɔ bubu nu.

Ele be MAP film tiatia nabu:

• Nuɖuɖu ƒomevi kple nugbagbevi suesuewo ƒe afɔkuwo

• Oxygen, carbon dioxide kple nitrogen ƒe tsakatsaka

• Tray oxygen ƒe kaka ƒe agbɔsɔsɔme

• Film oxygen ƒe kaka ƒe agbɔsɔsɔme

• Tsi ƒe dzoxɔxɔ ƒe mɔxenu

• Oxygen si susɔ le nutrenu vɔ megbe

• Gas-to-product ƒe agbɔsɔsɔme

• Seal ƒe blibonyenye kple package leak rate

• Dzoxɔxɔ si wodzrana ɖo kple emama

• Taɖodzinu ƒe agbenɔƒe si woɖo ɖi

Ele be woatsɔ agba ŋutɔŋutɔ, film, gas tsakatsaka, nuɖuɖu ƒe nuwɔna kple nubablɛ ƒe dɔwɔnuwo aɖo kpe eƒe agbenɔƒe ƒe dɔwɔwɔ dzi.

Alesi Anti-Fog PET/PE Film wɔa Dɔe

Zi geɖe la, tsidzadza dzɔna ne ya dzodzoe si xɔ dzo le agbaa me ka film si fa wu la ƒe anyime.

Nusi tsi tre ɖe afu ŋu alo nusi wotsɔ kpe ɖe eŋu trɔa film la ƒe gota gome ƒe nuwɔna ale be tsi kaka ɖe akpa tsɛ aɖe me le esi teƒe be wòawɔ tsitete vovovo siwo woate ŋu akpɔ.

Dɔwɔwɔ si tsi tre ɖe afu ŋu nɔ te ɖe:

• Akpa si tsi tre ɖe afu ŋu ƒe mɔfiame nyuitɔ

• Nuɖuɖu yɔyɔ ƒe dzoxɔxɔ

• Nusi wowɔ ƒe tsidzadza ƒe agbɔsɔsɔme

• Fafa ƒe duƒuƒu

• Dzoxɔxɔ si wodzrana ɖo ɖe nufamɔ̃ me

• Kɔsɔkɔsɔ fafɛ ƒe tsatsam ƒe didime

• Anti-fog dɔdamɔnu ƒomevi kple susu tsɔtsɔ ɖe eŋu

Ele be woazã nuɖuɖu kple nudzraɖoƒe ŋutɔŋutɔ atsɔ ado nusiwo tsi tre ɖe afu ŋu ƒe nɔnɔmewo kpɔ tsɔ wu be woada wo kpɔ le xɔme ƒe dzoxɔxɔ ko me.

Tray Nutrenu Mɔ̃ ƒe Ðoɖowɔwɔ

Woate ŋu azã PET / PE nutsyɔnu film le asi, afã-automatic kple bliboe automatic tray nutrenu dɔwɔnuwo ne agbalẽ xatsaxatsa kple film wɔwɔme sɔ kple mɔ̃a.

Mɔ̃a ƒe nɔnɔme veviwo dometɔ aɖewoe nye:

• Mɔ̃a wɔla kple eƒe kpɔɖeŋu

• Tray mold kple cavity ƒe didimewo

• Tray ƒe xexlẽme le nutrenu ƒe tsatsam ɖesiaɖe me

• Film ƒe kekeme si wobia

• Core ememe didime

• Maximum agbalẽ xatsaxatsa gota didime

• Ðe dzi ɖi le mɔfiame

• Sealant layer wound le eme alo egodo

• Seal-plate ƒe dzoxɔxɔ

• Ɣeyiɣi si nànɔ anyi

• Nutrenu ƒe nyaƒoɖeamenu

• Nuwɔwɔ ƒe duƒuƒu

• Lãɖeɖe ƒe ɖoɖo

• Ŋkɔ ŋɔŋlɔ ƒe dzesi sensor

• MAP gas-flush ƒe dɔwɔwɔ

HSQY hã naa nuawo    nuɖuɖu tray nutrenu mɔ̃wo    na dzoxɔxɔ nutrenu, MAP, gas flushing kple nuɖuɖu babla dɔwo bubuwo.

Dzoxɔxɔ-Sealing Dɔwɔna na PET / PE Trays

1. Tray loading: Wotsɔa nuɖuɖu dea tray la me evɔ womeƒoa ɖi nutrenu ƒe flange o.

2. Film indexing: Wotsɔa nutsyɔnu film la dana ɖe agbaa dzi eye PE ƒe nutrenu ƒe akpaa dzea ŋgɔ agbaa.

3. Dzoxɔxɔ zazã: Dɔwɔnu si wotsɔ xea nu la doa dzo na film kple tray ƒe flange.

4. Nyaƒoɖeamenu zazã: Nyaƒoɖeamenu si dzi wokpɔna nana film la doa ka kple flange la ɖekae.

5. Ɣeyiɣi si woatsɔ anɔ anyi: Woléa dzoxɔxɔ kple nyaƒoɖeamenu me ɖe asi ɣeyiɣi didi ale gbegbe be nutrenu ƒe ƒuƒoƒoawo te ŋu blana.

6. Fafa: Nutrenua va sẽna ɖe edzi ne nusi wotsɔ blae la dzo le dɔwɔnu si wodo dzoe la me.

7. Film lãɖeɖe: Mɔ̃a lãa film la ƒoa xlã tray ƒe nɔnɔmetata alo trɔa web si ƒo xlãe la ɖe megbe.

8. Dzodzro: Woléa ŋku ɖe agbalẽvi la ŋu be ʋuʋudedi, mɔ̃a ƒe sisi, ɖiƒoƒo kple nutrenu si mede blibo o hã.

Nuɖuɖugoe ƒe nutsyɔnu film nye nusi wotsɔ xea dzoxɔxɔ nu koŋ. Mele be woabu 'Cold sealing' be enye standard substitute o negbe ɖe wowɔ cold-seal structure si sea nyaƒoɖeamenu ƒe ɖoɖo tɔxɛ aɖe koŋ na dɔa hafi.

Alesi Nàɖo Nutrenu ƒe Fesre Si Sɔ

Nutrenu fesre nye dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si wotsɔ nɔa anyi ƒe ƒuƒoƒo si naa nutrenu si dzi woda asi ɖo evɔ megblẽa nu le film alo agbaa ŋu o.

Le dodokpɔa wɔɣi la, da asɔ:

• Dzoxɔxɔ suetɔ kekeake si naa nutrenu si yia edzi ɖaa

• Dzoxɔxɔ si sɔ gbɔ wu hafi film alo tray ƒe tɔtɔ nadzɔ

• Nutrenu ƒe ŋusẽ le ɣeyiɣi vovovowo me

• Peel ŋusẽ le fafa kple fridzi dzraɖo vɔ megbe

• Dɔwɔwɔ kple tsi alo ami ƒe ɖiƒoƒo si seɖoƒe li na

• Nutrenu ƒe ɖekawɔwɔ le fli ƒe duƒuƒu si nèdi nu

• Film ƒe shrinkage kple flitete ƒe wɔwɔme

• Tray-flange ƒe nɔnɔmetɔtrɔ

• Package leak kple burst ƒe dɔwɔwɔ

Menye ɣesiaɣie dzoxɔxɔ dzi ɖeɖe kpɔtɔ nyea nuwɔna nyuitɔ na nutrenu si gbɔdzɔ o. Ele be woalé ŋku ɖe tray ƒe anyigba, film ƒe nɔnɔme, nyaƒoɖeamenu kple dɔwɔnu ƒe kadodo hã ŋu.

PET/PE Tray ƒe Nutrenu ƒe Kuxi Siwo Bɔ

Microwave, Freezer kple Oven ƒe Dɔwɔwɔ

Ðe Woate Ŋu Atsɔ Microwave De PET/PE Nutrenu Film Mea?

Woate ŋu ato PET/PE film ƒe wɔwɔme tiatia aɖewo vɛ hena microwave gbugbɔgafa, gake mele be woagblɔ le wo ɖokui si be film si wozãna ɖaa la mele microwave me o.

Microwave ƒe dɔwɔwɔ nɔ te ɖe tray-and-film ƒe wɔwɔme bliboa, nuɖuɖu ƒe wɔwɔme, dzoxɔxɔ ƒe ɣeyiɣi, microwave ƒe ŋusẽ kple nenye be ele be woaɖe film la ɖa alo woaɖe ya le eme dzi.

Ðe Woate Ŋu Azã PET/PE Film Na Nuɖuɖu Siwo Wofa Ðe Tsi Mea?

Woateŋu azã dzesi tiatia aɖewo na nubablɛ siwo wofa tsikpe me ne woɖo kpe dzoxɔxɔ si bɔbɔ ƒe asitɔtrɔ, nusiwo ate ŋu adze anyi kple nutrenu ƒe blibonyenye dzi.

Ele be dodokpɔwo nagbugbɔ tsikpe, nuƒoƒoƒu, ʋuɖoɖo, tsikpewo ŋudɔwɔwɔ kple tsikpe ƒe nɔnɔmewo awɔ.

Ðe Woate Ŋu Azã Standard PET/PE Film le Dzodoƒe?

Zi geɖe la, womeɖo PET/PE nutrenu film si wozãna ɖaa na dzodoƒe zazã si bɔ o elabena PE nutrenu ƒe ƒuƒoƒoa ƒe dzoxɔxɔ ƒe tsitretsitsi medea dzodoƒe tɔxɛ siwo woate ŋu awɔ o.

Dzodoƒe ƒe dɔwɔwɔwo hiã film si ŋu woda asi ɖo si te ŋu nɔa te ɖe dzoxɔxɔ nu kple agba si sɔ, abe CPET ɖoɖo si wozãna koŋ ene.

Ðe Woate Ŋu Awɔ Pasteurized Alo Agbugbɔ Awɔ PET/PE Filma?

Mele be woazã standard PET/PE lidding film le eɖokui si hena pasteurization, ƒoƒo alo retort dɔwɔwɔ o.

Dɔwɔwɔ siawo bia film ƒe dzesi si woto vɛ na dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi didime, ami si le eme kple nuɖuɖu ƒe wɔwɔme si wogblɔ.

Nuɖuɖu-Kadodo ƒe Sedziwɔwɔ

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe aŋɔ si tututu, nusi léna ɖe nu ŋu, nusi tsia afu nu, agbalẽtata ƒe nuŋlɔtsi, film ƒe wɔwɔme, nuɖuɖu ƒe ƒomevi, ɣeyiɣi didi si woatsɔ aƒo ka kple dzoxɔxɔ si wozãna dzi.

Ele be nuƒlelawo nana:

• Dukɔ alo nuto si ŋu nèɖo taɖodzinu ɖo

• Nuɖuɖu ƒomevi

• Nuɖuɖu ƒe kadodo tẽ ƒe nɔnɔmewo

• Ɣeyiɣi didi si woatsɔ aƒo ka na amewo

• Ambient, fridzi, tsikpe alo dzoxɔxɔ zazã

• Microwave, pasteurization alo oven ƒe nudidiwo

• Film si wota alo esi wometa o

• Gbeƒãɖeɖe siwo hiã alo ʋuʋu dodokpɔ

• Nusiwo ŋu seɖoƒe le ƒe nudidiwo

Ele be woaɖo kpe nuŋlɔɖi siwo sɔ dzi na film la ƒe nɔnɔme tututu kple nɔnɔme siwo woɖo be woazã tsɔ wu be woasusui be wosɔ na PET/PE film ɖesiaɖe.

Ðe Woate Ŋu Agazã PET/PE Nutrenu Filma?

PET/PE film la me polymer vovovo eve ya teti le eye mele be woaɖɔe le eɖokui si be enye nu ɖeka alo nusi woate ŋu azã ake le xexeame katã o.

Nusiwo woate ŋu azã ake ŋutɔŋutɔ nɔ te ɖe:

• PET kple PE ƒe sɔsɔme le sinima la me

• EVOH kple nusiwo wotsɔna léa nu ɖe ​​nu ŋu ƒe anyinɔnɔ

• Tray material kple package ƒe nɔnɔme bliboa

• Ŋutete si le ame si be wòaɖe film la ɖa le agbaa me

• Agbalẽtata ƒe nuŋlɔtsiwo kple nusiwo wotsɔ blaa nu

• Nuɖuɖu ƒe ɖiƒoƒo

• Nutoa me nuƒoƒoƒu, nuƒoƒoƒu kple nusiwo wogbugbɔ zãna ƒe dɔwɔƒewo

HSQY ateŋu adzro xɔtuɖoɖo bubu siwo wotu ɖe PE dzi alo esiwo sɔ kple PET hã me na dɔ siwo tsɔa nusiwo wogbugbɔ zãna ƒe ɖoɖowɔwɔ ɖoa ​​nɔƒe gbãtɔ. Ele be woalé ŋku ɖe nubablɛ ƒe ɖoɖo bliboa ŋu wòasɔ kple asi si woɖo tae ƒe mɔfiame si ku ɖe nusiwo wogbugbɔ zãna ŋu.

PET/PE ƒe Nutsyɔnu Film si Wota Ðe Ðoɖo Nu

HSQY ate ŋu awɔ PET / PE nutrenu film si wota ɖe ɖoɖo nu na adzɔnu ƒe ŋkɔ tɔ, nuɖuɖu wɔlawo, nubablɛwo trɔlawo kple ame ŋutɔ ƒe ŋkɔ dɔwo.

Zi geɖe la, nyatakaka siwo tso sinima siwo wota me dometɔ aɖewoe nye:

• Nutata ƒe faɛl si woate ŋu atrɔ asi le

• Film ƒe kekeme

• Nutata gbugbɔgawɔ ƒe didime

• Agbalẽtata ƒe amadedewo ƒe xexlẽme

• Pantone alo amadede ƒe nyatakaka siwo dzi woda asi ɖo

• Agbalẽtata ƒe mɔfiame

• Ŋkɔŋlɔɖi-dzesi ƒe ɖoƒe

• Tray ƒe nɔnɔme le nutrenu ƒe mɔ̃a me

• Sealing layer wound le eme alo egodo

• Wobia be wòadze matte alo gloss

• Nuɖuɖu-kadodo kple nuŋlɔtsi ƒe nudidiwo

PET / PE Nutrenu Film Tiatiawɔblɔɖe

• PET / PE ƒuƒoƒo ƒe ɖoɖo si wowɔ ɖe ɖoɖo nu

• Custom ƒe titrime bliboa

• PE sealant ƒe wɔwɔme si wowɔ ɖe ɖoɖo nu

• Easy-peel, dziɖuɖu-peel alo lock-seal dɔwɔwɔ

• Trɔ asi le peel ŋusẽ ŋu

• Atikewɔwɔ si tsia afu nu

• EVOH ƒe mɔxenu gã ƒe ƒuƒoƒo

• Oxygen-ɖoɖo ƒe nudidi siwo wowɔ ɖe ɖoɖo nu

• Xɔ siwo me woate ŋu atɔ nu le o

• Atike siwo wowɔna le nufamɔ̃ me

• Microwave-grade ƒe xɔtunu tiatia aɖewo

• Microperforation na nu yeyewo

• Logo kple nɔnɔmetatawo tata si wowɔ ɖe ɖoɖo nu

• Film ƒe kekeme kple agbalẽ xatsaxatsa ƒe didime si wowɔ ɖe ɖoɖo nu

• Dekɔnu nu vevi kple gota agbalẽ xatsaxatsa ƒe didime

• Mɔfiame si wotsɔ ƒoa xlãe si wowɔ ɖe ɖoɖo nu

• Dzesi siwo wotsɔ ŋlɔa ŋkɔ na mɔ̃ siwo wowɔna le wo ɖokui si

• Kakɛ siwo wowɔ ɖe ɖoɖo nu, ŋkɔwo kple pallet-bablawo

Dzɔdzɔmeŋusẽdzikpɔkpɔ na PET / PE Lidding Film

Film ƒe nyonyome si li ke kpena ɖe ame ŋu be woaɖe nusiwo dona le agbalẽgowo me, woƒe ʋuʋu si mewɔa tɔtrɔ o, gbeɖuɖɔ siwo le agbalẽ xatsaxatsawo me kple nutrenu-ka ƒe nutsotsowo dzi akpɔtɔ.

Nusiwo sɔ siwo woatsɔ alé ŋku ɖe nu ŋu ate ŋu anye:

• Film kple laminate ƒe wɔwɔme ƒe kpeɖodzi

• Titrime bliboa kple mɔɖeɖe ɖe nu ŋu

• Layer ɖekaɖeka ƒe mama ne wogblɔe

• Roll kekeme mɔɖeɖe ɖe nu ŋu

• Roll ƒe didime kple kpekpeme

• Core ƒe lolome kple roll diameter

• Roll alignment kple winding tension

• Nukpɔkpɔ le gaglãgbe, haze kple gloss

• Anyigba ƒe ʋuʋudedi, gel kple ɖiƒoƒo

• Lamination-bond ƒe ŋusẽ

• Nutrenu-gɔmedzedze ƒe nuwɔna

• Nutrenu-ŋusẽ kple peel-ŋusẽ dodokpɔ

• Dodokpɔ si tsia tre ɖe afu ŋu ne ehiã

• Oxygen kple tsidzadza ƒe kaka ne wogblɔe

• Puncture kple tensile dɔwɔwɔ

• Ta ƒe amadede kple ŋkɔ ŋɔŋlɔ ƒe nyateƒetoto

• Nubablɛwo kple pallet takpɔkpɔ

Nubablɛ, Nudzraɖoƒe kple Dukɔwo Dome Nudɔdɔ

Zi geɖe la, wokpɔa PET/PE sealing-film rolls ta tso ke, tsidzadza, ƒoƒo kple roll-edge ƒe gbegblẽ me hafi woaɖo wo ɖe dukɔwo dome.

Nubablɛ ƒe tiatia ate ŋu anye:

• Akplo ememetɔ siwo kpɔa ame ta

• Ametakpɔnu siwo wotsɔa agbalẽ xatsaxatsa ƒoa nui

• Kakɛ ɖekaɖeka siwo wotsɔ ɖoa ​​duta

• Batch kple specification ƒe dzesiwo

• Pallet keke agbalẽ xatsaxatsa

• Dzogoe kple nugbɔ takpɔkpɔ

• Pallet siwo wotsɔ ɖoa ​​duta siwo me fumigation mele o

• Pallet ƒe kɔkɔme kple agbalẽɖoɖoɖa ƒe dzesi siwo wowɔ ɖe ɖoɖo nu

Ele be woadzra film ɖo ɖe eƒe agba gbãtɔ me le teƒe si le dzadzɛ, si me tsi mele o, si didi tso ɣe ƒe keklẽ tẽ, dzoxɔxɔ si gbɔ eme, fafa kple ŋutilã me nugbegblẽ gbɔ.

Nukatae Nàtia HSQY be wòanye Wò PET/PE Nutrenu Film Dɔwɔƒe?

• Adzɔnuwo wɔlawo ƒe nuzazã tẽ: Kpekpeɖeŋunana nuɖuɖuwɔlawo, tray wɔlawo, tɔtrɔlawo kple nubablɛwo mamalawo.

• PET/PE ƒe etɔxɛnyenye: Woate ŋu atsɔ film asɔ kple PE ƒe nutrenu si le PET/PE traywo me.

• Easy-peel kple lock-seal tiatia: Woate ŋu atrɔ asi le ʋuʋu ƒe dɔwɔwɔ ŋu le package ƒe nudidiwo nu.

• Atike siwo tsia afu nu: Filmwo li na nuɖuɖu siwo le fridzi kple asitsaƒewo ɖeɖefia.

• Tiatia siwo me mɔxenu gãwo le: Woate ŋu ada film siwo wotu ɖe EVOH dzi akpɔ be MAP kple nuɖuɖu siwo me oxygen le hã.

• Agbalẽtata ɖe ɖoɖo nu: Woate ŋu atsɔ dzesidenuwo, nɔnɔmetatawo, adzɔnuwo ŋuti nyatakakawo kple ŋkɔ ŋɔŋlɔ ƒe dzesiwo akpe ɖe eŋu.

• Custom roll specifications: Woate ŋu asɔ kple mɔ̃a ƒe kekeme, didime, nu vevi, eƒe didime kple eƒe ʋuʋu ƒe mɔfiame.

• Tray-and-film ƒe sɔsɔ: Woate ŋu atu film ƒe aɖaŋuɖoɖowo ɖe tray ƒe kpɔɖeŋu ŋutɔŋutɔwo kple nutrenu dodokpɔwo dzi.

• Dɔwɔnuwo ƒe kpekpeɖeŋu: HSQY ate ŋu ato film ƒe ɖekawɔwɔ me kple asi, afã-automatic kple automatic tray sealers.

• Dodokpɔ ƒe kpekpeɖeŋu: Woate ŋu adzro kpɔɖeŋu film alo dodokpɔ ƒe agbalẽ xatsaxatsawo me hafi woawɔ asitsatsa.

• Nusiwo wotsɔ blaa nu bliboe: Woate ŋu akpɔ PET/PE agbawo, mɔxenu agbawo, nutrenu filmwo kple nutrenu mɔ̃wo tso nudzrala ɖeka gbɔ.

• Kpekpeɖeŋunana ɖe duta: Kakɛ siwo wowɔ ɖe ɖoɖo nu, pallets kple dukɔwo dome meliɖoɖo ƒe ɖoɖowo li.

Nyatakaka Siwo Hiã Na PET/PE Nutrenu Film Quote

Be nàxɔ sinima ŋuti kafukafu si sɔ kple dɔwɔƒea ƒe nyayɔyɔ la, taflatse na nyatakaka siwo gbɔna la dometɔ geɖe alesi nàte ŋui:

• PET / PE tray nu ƒe wɔwɔme blibo

• Nusiwo le tray nutrenu flange dzi

• Dzɔdzɔme tray ƒe kpɔɖeŋuwo

• Tray ƒe gotagome didime kple flange ƒe kekeme

• Nuɖuɖu ƒomevi

• Dzoxɔxɔ si wotsɔ yɔa nu me

• Ambient, chilled, frozen alo dzoxɔxɔ ƒe nɔnɔmewo

• Easy-peel alo lock-seal nudidi

• Film kpɔɖeŋu alo taɖodzinu peel ŋusẽ si li xoxo

• Nudidi si tsi tre ɖe afu ŋu

• High-barrier alo MAP ƒe nudidi

• Taɖodzinu ƒe agbenɔƒe si woɖo ɖi

• OTR alo WVTR si hiã ne woli

• Film ƒe titrime si hiã

• Film ƒe kekeme kple agbalẽ xatsaxatsa ƒe didime

• Core ememe didime

• Maximum agbalẽ xatsaxatsa gota didime

• Sealing layer wound le eme alo egodo

• Mɔ̃a wɔla kple eƒe kpɔɖeŋu

• Fifia ƒe nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woanɔ anyi

• Nuwɔwɔ ƒe duƒuƒu

• Film si wota alo esi wometa o

• Nutata kple agbalẽtata gbugbɔ ƒe didime

• Nuɖuɖu-kadodo ŋuti nuŋlɔɖiwo ƒe nudidiwo

• Nudɔdɔ ƒe agbɔsɔsɔ kple ƒe sia ƒe zazã

• Dukɔ si me woayi, melidzeƒe alo adrɛs si dzi woaɖoe ɖo

Nya Siwo Wobiaa Enuenu Tso PET/PE Tray Sealing Film Ŋu

Nukae wotsɔ wɔa PET/PE tray sealing film?

Zi geɖe la, etsɔa PET alo BOPET gotagome ƒuƒoƒo kple dzoxɔxɔ-nutrenu si wotu ɖe PE dzi ƒoa ƒui. EVOH kple kaƒoƒo ƒe ƒuƒoƒo bubuwo hã ate ŋu anɔ mɔxenu gã ƒe dzesidewo me.

Nukatae wozãa PE abe nutrenu ene?

PE naa dzoxɔxɔ-nutrenu ƒe dɔwɔwɔ si ŋu kakaɖedzi le, tsi ƒe tsitretsitsi kple ŋutete be woawɔ easy-peel alo sesẽ wu lock-seal nuwɔna.

Ðe PET/PE nutrenu film sɔ na mono-PET trays?

Menye le eɖokui si o. Wotrɔ asi le PET/PE nutsyɔnu film koŋ ŋu na PE-si wotu ɖe tray nutrenu ƒe anyigba. Mono-PET-gbadzɛwo ate ŋu abia be woatsɔ nutrenu si woate ŋu atsɔ atre PET tẽ alo film si wofa etɔxɛe.

Ðe PET/PE film ɖeka ma ke ate ŋu atre PP, PET kple PS traywo nua?

Xexeame katã ƒe nutrenu ƒe atike aɖewo ate ŋu abla ɖe agba geɖe ƒe anyigba dzi, gake ele be woado woƒe sɔsɔ kple woƒe lãgbalẽ ƒe ŋusẽ kpɔ ɖe vovo le nu ɖesiaɖe ŋu.

Titrime kae wozãna zi geɖe?

Afisi bɔ ɖo la anɔ abe 25–60 μm ene. Film siwo xea mɔ na nu gãwo kple esiwo me woɖea nu le o ate ŋu azã xɔtunu siwo le kpekpem wu le alesi wozãe nu.

Vovototo kae le easy peel kple lock seal dome?

Wotrɔ asi le film si woɖena bɔbɔe ŋu na nuƒlelawo ƒe ʋuʋu si dzi wokpɔna. Lock-seal film naa kadodo sesẽ aɖe nɔa anyi hena nubablɛwo ƒe dedienɔnɔ geɖe wu eye ate ŋu abia be woalãe alo atɔe.

Nukatae film si woɖena bɔbɔe la ʋuʋu sesẽna?

Nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu alo ɣeyiɣi si woatsɔ anɔ anyi ate ŋu asɔ gbɔ akpa, alo film si wotia la manye nusi woate ŋu aɖe bɔbɔe na tray la ƒe anyigba ŋutɔŋutɔ o.

Nukatae film la vuvu le esi teƒe be wòaɖee dzadzɛ?

Film ƒe vuvu ate ŋu adzɔ ne nutrenu ƒe ŋusẽ wu film ƒe ŋusẽ, film la le sue akpa, film la gblẽ alo peel-tab ƒe nɔnɔme mesɔ o.

Ðe film si tsi tre ɖe afu ŋu hiã na nuɖuɖu siwo wofa?

Wokafui be woawɔ film si tsia afu nu ne tsi ƒe ƒoƒo ate ŋu axe mɔ na nukpɔkpɔ. Wotiae zi geɖe na sabala, nukuwo, lã, ƒumelãwo kple nuɖuɖu siwo wofa.

Ðe woate ŋu azã PET/PE nutrenu film na MAP ƒe nubablɛwoa?

Ẽ, ne wotsɔ film si sɔ si me mɔxenu gã le sɔ kple agba si sɔ kple mɔxenu gã si sɔ. Ðewohĩ PET/PE film si wozãna ɖaa mana oxygen mɔxenu si sɔ na MAP o.

Nukae EVOH wɔna le sinima si me mɔxenu gãwo le me?

EVOH kpena ɖe ame ŋu be oxygen kple gas ƒe kaka dzi naɖe akpɔtɔ. Edoa alɔ yamenutome si ŋu wotrɔ asi le la léle ɖe asi kple nuɖuɖu siwo me ɔksidzin le ƒe ametakpɔkpɔ.

Ðe PET/PE film ate ŋu atre to tsi alo ami mea?

Ðiƒoƒo ƒe nutrenu ƒe hatsotso tiatia aɖewo ate ŋu ado dzi le tsi alo ami si seɖoƒe li na me, gake ele kokoko be woalé agbaa ƒe flange ɖe te alesi woate ŋui. Wobia be woado wo kpɔ le asitsatsa me.

Ðe woate ŋu azã PET/PE lidding film na nuɖuɖu siwo wofa tsikpe mea?

Woateŋu azã dzesi tiatia aɖewo na nubablɛ siwo wofa tsikpe me ne woɖo kpe dzoxɔxɔ si bɔbɔ ƒe asitɔtrɔ, nutrenu ƒe blibonyenye kple ʋuɖoɖo ƒe dɔwɔwɔ dzi vɔ.

Ðe PET/PE film microwave le dediea?

Film ƒe dzesi si woto vɛ koŋ eye woda asi ɖe edzi be woatsɔ agbugbɔ dzoxɔxɔ awɔ microwave koe wòle be woazã. Ele be woado tray, film, nuɖuɖu kple dzoxɔxɔ ƒe tsatsam bliboa kpɔ.

Ðe woate ŋu azã PET/PE film si wozãna ɖaa le dzodoƒe?

Mele be woazã PET/PE film si wozãna ɖaa le dzodoƒe si wozãna ɖaa o. Dzodoƒe zazã bia be woatsɔ film si ŋu woda asi ɖo si te ŋu nɔa te ɖe dzoxɔxɔ nu kple agba si sɔ.

Nukatae PET/PE tray ƒe agba me tsi si dona?

Nusiwo gbɔ wòtsona zi geɖee nye nuɖuɖu alo tsi si le flange la dzi, film ƒe dodo, channel ƒe sisi, flitete, tray siwo gblẽ, nutrenu ƒe nɔnɔme siwo mesɔ o alo film si mewɔ ɖeka o.

Ðe HSQY ate ŋu atrɔ asi le lãgbalẽa ƒe ŋusẽ ŋua?

Ɛ̃. Woate ŋu atrɔ asi le easy-peel kple controlled-peel ƒe atikewo ŋu le tray la ƒe anyime, nutrenu ƒe nɔnɔmewo kple nuƒlela ƒe ʋuʋu ƒe nuteƒekpɔkpɔ si hiã nu.

Ðe woate ŋu ata PET/PE film ɖe ɖoɖo nua?

Ɛ̃. Woate ŋu ata logowo, nutatawo, mɔfiamewo, barcodewo, QR codewo kple ŋkɔ ŋɔŋlɔ ƒe dzesiwo le asisi la ƒe nutatawo kple agbalẽ xatsaxatsa ƒe ɖoɖo nu.

Ðe woate ŋu agbugbɔ PET/PE nutrenu film awɔ dɔa?

PET/PE nye multi-polymer laminate eye womelɔ̃ ɖe edzi le xexeame katã le nusiwo wogbugbɔ zãna ƒe ɖoɖowo me o. Gbugbɔgazã ŋutɔŋutɔ nɔ te ɖe agbalẽvi bliboa kple nutoa me nuwo gbugbɔgazã ƒe xɔtuɖoɖowo dzi.

Nukae nye MOQ na PET / PE nutrenu film?

Nufiame MOQ la ade 500 kg le titrime alo nɔnɔme ɖesiaɖe me. Sinima siwo wota, siwo me mɔxenu gãwo le kple esiwo wowɔ etɔxɛ ate ŋu abia be woawɔ agbɔsɔsɔ suetɔ kekeake si to vovo.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Nufiame wɔwɔ ƒe ɣeyiɣi anɔ abe dɔwɔŋkeke 10–15 ene le esi woɖo kpe xɔtuɖoɖo, didime, agbalẽtata kple nudɔdɔ ŋuti nyatakakawo dzi vɔ megbe.

Ðe mate ŋu abia be woado sinima kpɔ hafi woawɔe le agbɔsɔsɔ gã mea?

Woate ŋu adzro kpɔɖeŋu film alo dodokpɔ agbalẽ xatsaxatsawo me hena dzoxɔxɔ nutrenu, lãgbalẽ dodokpɔ, anti-fog dodokpɔ, MAP dodokpɔ kple mɔ̃ ƒe ɖekawɔwɔ.

Nyatakaka kawoe hiã be woatsɔ akafu sinima si sɔ?

Na tray ƒe wɔwɔme, tray ƒe kpɔɖeŋuwo, nuɖuɖu ƒomevi, nudzraɖoƒe ƒe nɔnɔmewo, easy-peel alo lock-seal nudidi, mɔ̃ ƒe kpɔɖeŋu, film ƒe didime, nutrenu ƒe nɔnɔmewo kple ƒe sia ƒe didi.

Bia PET/PE Tray Nutrenu Film Quote

Èle PET / PE tray nutrenu film wɔla, bɔbɔe-peel lidding-film dɔwɔƒe, anti-fog film wɔla alo EVOH high-mɔxenu MAP film solution dim?

Te ɖe HSQY ŋu be nàbia film ƒe aɖaŋuɖoɖowo, dodokpɔ ƒe agbalẽ xatsaxatsawo, mɔ̃ɖaŋununya ƒe nɔnɔmewo, agbalẽtata ɖe ɖoɖo nu, tray siwo sɔ, nutrenu-mɔ̃ ƒe kpekpeɖeŋu, dɔwɔƒe ƒe asixɔxɔ kple dukɔwo dome agbalẽɖoɖoɖa ŋuti nyatakakawo.

       Bia Nya Siwo Woagblɔ