PVC FOAM BOARD ƑE NUÐEÐEŊUTI
Tsɔ board ƒe wɔwɔme, eƒe anyigba, eƒe kpekpeme kple agbalẽ dzi nyawo ƒe nɔnɔme sɔ kple wò agbalẽtata, mɔfiame, lamination alo cabinet ɖoɖowɔɖi—emegbe nàda asi ɖe dzeside ŋutɔŋutɔ dzi hafi nàwɔe.
NYAŊUÐOÐO KABA
PVC foam board nye agbalẽ dzi nyawo si ƒe kpekpeme le bɔbɔe, si sesẽ, si wotsɔ PVC ƒe nuto si me foam le wɔ. Wobua eŋu zi geɖe na dzesiwo, ɖeɖefiawo, xɔmenuwo ƒe akpawo kple xɔmenuwo ƒe nuwo elabena woateŋu atsoe, akplɔe, aku nu, ata alo aƒoe ne grade kple dɔwɔwɔ sɔ.
Le B2B dzɔtsoƒe gome la, ' PVC foam board' nye gɔmedzedze ko. Ele be woaŋlɔ board ƒe wɔwɔme, eƒe kpekpeme, eƒe titrime, eƒe anyigba, amadede kple eƒe dɔwɔwɔ le eƒe anyime ɖe nɔnɔmetata la me eye woalé ŋku ɖe eŋu le kpɔɖeŋu si le eteƒe me.
BOARD ƑOME TIATIA
Esiawo nye gɔmedzedze ŋutɔŋutɔwo, ke menye xexeame katã ƒe dɔwɔwɔ ŋuti nya siwo wogblɔna o. Dzesi mamlɛtɔ nɔ te ɖe grade, titrime, kpekpeme kple ewɔwɔ ƒe ɖoɖo si wogblɔ dzi.
Gɔmedzedze si wozãna le mɔ gbadza nu ne kpekpeme si bɔbɔ ɖe anyi wu kple anyigba si le gbadzaa le vevie na nuɖeɖefia, agbalẽtata alo nuwɔwɔ ƒe ɖoɖo siwo me kɔ.
Ɖo kpe edzi:Atsyã sesẽ ƒe xɔtutu si wodaa asɔ zi geɖe na akpa siwo woɖo mɔ na, xɔmenuwo ƒe akpawo kple dɔ siwo me wodi be woawɔ anyigba alo nugbɔ si sesẽ wu.
Ɖo kpe edzi:Xɔtuɖoɖo si wotu ɖe ƒuƒoƒo me si woate ŋu atia ne nuƒlelawo di be ŋutigbalẽ kple nu veviwo ƒe ƒuƒoƒo si to vovo na nukpɔkpɔwo alo akpa siwo wowɔ.
Ɖo kpe edzi:Atsyɔ̃ɖoɖo-dzime tiatia na kabinet, gli-panel kple xɔmenuwo ɖoɖowo afisi nuwuwu nye akpa aɖe le kplɔ̃ si wona.
Ɖo kpe edzi:FIFI NUSIWO WOTSƆ ƑE NU KPƆKPƆ Kpuie
Ʋu adzɔnu aɖe be nàlé ŋku ɖe eƒe nyatakaka siwo li fifia ŋu, emegbe nàɖo dɔbiagbalẽvi si nèdi be yeawɔ kple eŋudɔwɔwɔ ƒe mɔnu ɖee hena dzeside ƒe kpeɖodzi.
Le nuƒlela siwo tsɔa xɔmenuwo kple akpa siwo woɖo ɖe mɔ dzi ƒe ʋuƒo si ƒe goglome sesẽ la sɔna kple wo nɔewo.
Kpɔ nusi wowɔAtsyɔ̃ɖoɖo ƒe tiatia aɖe na kabinet kple gli-panel ɖoɖowo.
Kpɔ nusi wowɔLe ɖoɖowɔɖi siwo dzea egɔme kple denser rigid- agbalẽ dzi nyawo nudidi.
Kpɔ nusi wowɔTiatia tiatia kple nɔnɔme gãwo ƒe tiatia hena dɔa me toto.
Kpɔ nusi wowɔAtsyɔ̃ɖoɖo ƒe ʋuƒo si ƒe nɔnɔme le 4×8 si woatsɔ ada asɔ le kabinet dɔwo ŋu.
Kpɔ nusi wowɔA standard-format gɔmedzedze na dzesiwo kple fabrication biabia.
Kpɔ nusi wowɔA co-extruded agbalẽ dzi nyawo tiatia na ɖeɖefia kple fabricated-part sampling.
Kpɔ nusi wowɔLe nuƒlela siwo le Celuka xɔtutu si ƒe anyigba sesẽ la me tom.
Kpɔ nusi wowɔAPPLICATION ƑE ƲUƲU ƑE MƆKPƆKPƆ
Na nudzrala la ƒe akpa si wowɔ vɔ ƒe nudidi—menye agbalẽ dzi nyawo ƒe lolome ɖeɖeko o—ale be nusiwo woatsɔ awɔe ƒe tiatia nate ŋu abu akɔnta le ewɔwɔ kple dzedzeme ŋu.
Gblɔ agbalẽtata ƒe mɔnu, nuŋlɔtsi ƒe ɖoɖo, nukpɔkpɔ ƒe didime, amadede, anyigba kple nenye be woaɖo ʋuƒoa alo woatsɔe aɖo xɔme.
Kpɔɖeŋu dodokpɔ: ink adhesion, amadede, gbadzaa kple lãɖeɖe nugbɔ.Ma akpa ƒe didime, babla alo kpekpe mɔnu, agba teƒewo, nɔnɔmetata dɔwɔwɔ kple ʋuɖoɖo nudidiwo.
Kpɔɖeŋu dodokpɔ: mɔfiame, kadodo, kpekpe kple packed-afãwo gbɔ kpɔkpɔ.Ðe ʋɔtru alo ame kuku zazã, nuwuwu, CNC dɔwɔnu ƒe mɔ, nugbɔ ƒe atikewɔwɔ, xɔtunuwo kple subɔsubɔ ƒe nɔnɔme si wokpɔ mɔ na la gɔme.
Kpɔɖeŋu dodokpɔ: mɔ̃ ƒe nugbɔ, fasteners, lamination kple amadede ƒe sɔsɔ.Na ɖoɖoa ƒe nɔnɔmetata, eɖɔɖɔɖomɔnu, nuwuwu, beléle na eƒe hiahiãwo kple dɔa koŋ ƒe sedziwɔwɔ ŋuti nuŋlɔɖi ɖesiaɖe.
Kpɔɖeŋu dodokpɔ: ƒunukpeƒe tsitotsito, ɖɔɖɔɖo mɔnu, anyigba kple eɖoɖo mock-up.SPECIFICATION-GBÃTƆ RFQ
RFQ blibo ɖea megbedede kple megbe dzi kpɔtɔna eye wònana nudzralawo ƒe nyayɔyɔwo tsɔtsɔ sɔ kple wo nɔewo nɔa bɔbɔe. Ne wometso nya me le asixɔxɔ aɖe ŋu o la, ɖɔ dɔwɔwɔa eye nàbia be woaɖo kpɔɖeŋu ƒe didime si wokafu.
| RFQ field | Nusi woagblɔ | Nusita wòle vevie |
|---|---|---|
| Mᴐbibia | Nusiwo wowɔ kple subɔsubɔdɔ ƒe nɔnɔme si wowɔ vɔ | Frame na dzeside tiatia la |
| Board ƒomea | Free foam, Celuka, co-extruded alo laminated | Trɔa anyigba/nu vevi ƒe xɔtutu |
| Agbalẽvi ƒe nɔnɔme | Didime × kekeme, trim mɔɖeɖe kple nuku / nuwuwu mɔfiame | Ŋusẽkpɔɖeamedziwo le kutsetse kple nu babla me |
| Titrime & kpekpeme | Taɖodzinu kple mɔɖeɖe ɖe nu ŋu/ƒe didime si dzi woda asi ɖo | Ekpɔa ŋusẽ ɖe kpekpeme kple nuwɔwɔ ƒe nuwɔna dzi |
| Anyigba & amadede | Amadede ƒe dzesi, nuwuwu, film alo nufiame si dzi woda asi ɖo | Eɖoa nukpɔkpɔ ƒe lɔlɔ̃ ɖe edzi ƒe dzidzenu |
| Dɔwɔwɔ tso eŋu | Ta, CNC mɔ, saw, drill, babla, laminate alo blae | Ðe kpɔɖeŋu dodokpɔwo gɔme |
| Nuŋlɔɖiwo | Dzidzenu alo nyatakaka siwo dɔa bia koe | Ƒo asa na susu siwo dzi womeda asi ɖo o |
| Si wole dzadzram | Ƒe sia ƒe ƒe agbɔsɔsɔme, nudɔdɔ ƒe agbɔsɔsɔ, nubablɛ, melidzeƒe kple ŋkeke si dzi woɖoe | Doa alɔ nyayɔyɔ si woate ŋu azã |
FABRICATION ƑE NUKPƆKPƆWO
Nusiwo wotsɔ ɖɔa nuawoe mate ŋu axɔ ɖe dɔwɔwɔ ƒe dodokpɔ teƒe o. Zã teƒenɔlawo ƒe dɔwɔnuwo, nuzazãwo kple ɖoɖowo le afisiafi si wòanya wɔ le.
Kpɔ ink alo adhesive ƒe ɖekawɔwɔ, anyigba ƒe dzadzraɖo, dɔyɔyɔ ƒe nɔnɔmewo, amadede kple adhesive le mo si woɖo la ŋu ɖa.
Kpe ɖe dɔwɔnu, nuɖuɖu, duƒuƒu, dzoxɔxɔ, burrs, nugbɔ ƒe dzedzeme kple didime ƒe gbugbɔgawɔ ŋu le titrime si wodo ɖa la dzi.
Do do ƒe nyonyome, nugbɔ ƒe didime, xɔtunuwo, hehe ƒe nuwɔna kple ƒunukpeƒe ƒe nɔnɔme kpɔ le kpekpeme kple titrime si nètia la dzi.
Da kpe adhesive alo film, nyaƒoɖeamenu, dzoxɔxɔ, ɣeyiɣi si wònɔa anyi, nugbɔ tsitotsito kple dzedzeme le nɔnɔmewɔwɔ vɔ megbe.
TSO KPEKPEÐEŊU VASEÐE NUWO WƆWƆ
Ma zazã vɔ megbe, nutatawo, dɔwɔwɔ, lɔlɔ̃ ɖe edzi ƒe dzidzenuwo kple asitsatsa ƒe nuhiahiãwo.
Tia xɔtutu, titrime, kpekpeme, anyigba kple amadede si sɔ hena dodokpɔ.
Wɔ agbalẽtata, mɔ̃wo, kadodo, nuwo ɖɔɖɔɖo alo nuwo ƒoƒo ƒu dodokpɔwo to mɔnu si woɖo be woawɔ la zazã me.
Ŋlɔ nɔnɔme si dzi woda asi ɖo, dzedzeme ŋuti nyatakaka, babla kple nuŋlɔɖi siwo hiã hafi nàbia.
NUƒlela ƒe Nyabiasewo
Ŋuɖoɖo kpuiwo na nuƒlelawo ƒe ƒuƒoƒowo, adzɔnuwo wɔlawo kple adzɔnuwo wɔlawo.
Bia nya aɖe si ku ɖe dɔa koŋ ŋuWozãa ɖoɖo vovovowo ƒe xɔtutuwo. Zi geɖe la, wotiaa foam femaxee hena agbalẽtata kple nuɖeɖefiadɔ si me kɔ, gake zi geɖe la, wodaa Celuka kpɔna le afisiwo wodi be woatsɔ ŋutigbalẽ si sesẽ wu alo eƒe nugbɔ si sesẽ wu si wotsɔ mɔ̃ wɔe. Tsɔ kpɔɖeŋu ŋutɔŋutɔwo sɔ kple wo nɔewo elabena woƒe kpekpeme, woƒe wɔwɔme kple woƒe titrime hã kpɔa ŋusẽ ɖe emetsonuwo dzi.
Mele be woatsɔ avɔ aɖeke asusui o. Gblɔ alesi woaɖee afia, teƒe si wòaxɔ, ɣeyiɣi didi si woatsɔ aɖoe, amadede kple dɔa ƒe nudidiwo, emegbe nàbia dzeside si sɔ kple nuŋlɔɖi siwo akpe ɖe eŋu le afisi wòhiã le.
Wozãa PVC foam board geɖe le dzesi siwo wota kple ɖeɖefiadɔwo me, gake woƒe sɔsɔ nɔ te ɖe board ƒe anyigba, ink ƒe ɖoɖo kple dzadzraɖo dzi. Da asi ɖe ink ƒe adhesion, edada kple amadede dzi le agbalẽ dzi nyawo ŋutɔŋutɔ dzi.
Esiawo nye mɔ siwo bɔ siwo dzi woato awɔ dzeside siwo sɔ. Do dɔwɔnu ƒe ɖoɖowo kpɔ, nugbɔ ƒe nuwuwu, dzoxɔxɔ, gavi alo nusi wotsɔ de eme ƒe nɔnɔme, nugbɔ ƒe didime kple kpekpeme/titrime si nètia hafi woawɔe.
Ðo dɔbiagbalẽvi, board ƒome, lolome, titrime, density alo grade, anyigba/amadede, dɔwɔwɔ mɔnu, agbɔsɔsɔme, packing, yiyi kple nuŋlɔɖi siwo hiã. Foto si wota alo esi wowu enu ɖea vi ne eli.
Ɛ̃. Teƒenɔla ƒe kpɔɖeŋu na wò ƒuƒoƒoa ɖoa kpe dzedzeme, mɔɖeɖe ɖe nu ŋu kple dɔwɔwɔ dzi. Ŋlɔ nyatakaka si dzi woda asi ɖo kple kpɔɖeŋu ƒe nufiame ale be akpa evea siaa nazã lɔlɔ̃ ɖe edzi ƒe gɔmedzedze ɖeka.
Tsɔe sɔ kple abe na abe: board xɔtutu, didime kple tolerances, density / grade, anyigba, amadede, packing, nuŋlɔɖiwo, dodokpɔ kpɔɖeŋu kple asitsatsa nyawo. Ga home ɖe agbalẽ dzi nyawo ɖeka ɖeɖe ate ŋu aɣla nusiwo alo nubablɛ ƒe vovototowo.
È DZƆ ÐE NU BE WOAWƆ BE WOAWƆ BE WOAWƆ NU SIWO WOAWƆ LE AGBALẼŊLƆÐI ME?
HSQY ateŋu azã wò dɔa ƒe kpuie atsɔ atso board ƒomea dzi eye wòadzra kpɔɖeŋu alo nyayɔyɔ ɖo hena kpeɖodzi.
