PET plastic sheet we dɛn mek Kɔmpɔzit Fim dɛn APET PETG GAG

APET , PETG ɛn GAG shit Film fɔ Tɛmofɔmin

HSQY de mek klia ɛn kala APET , PETG ɛn GAG sheet matirial fim fɔ thermoformed pak, folding bɔks, print plastic prodak, displei kɔmpɔnɛnt, kad ɔvlay, protɛktiv kɔva ɛn kɔstɔmayz plastic fabrikeshɔn.

APET , PETG ɛn GAG na rilayt polyɛsta sheet matirial matirial, bɔt dɛn nɔ gɛt di sem kɔmpɔzishɔn ɔ prɔsesin bihayvya.

APET na wan amorphous PET sheet matirial we dɛn kin pik fɔ transparent pak ɛn kɔst-ɛfishin tɛmfɔmin. PETG na glycol-modified copolyester we dɛn mek fɔ impɔtant fɔmabiliti, tafnɛs, fabrikeshɔn ɛn dip-drɔ pefɔmɛns.

GAG na tri-layer coextruded sheet matirial wit PETG ɔta skin ɛn wan APET kɔr. Di kɔnstrɔkshɔn de kɔba di prɔsesin ɛn sɔfays kwaliti dɛn fɔ PETG wit di stiffnɛs ɛn kɔst efyushɔn fɔ wan APET sɛnta layt.

di tik we de fכm de kכmכt frכm lεk 0.15mm to 3mm. di rol wit dεm de frכm lεk 110mm to 1280mm, we standad sheet matirial dimεnshכn dεm inklud 915 × 1220mm εn 1000 × 2000mm.

Transparent, tinted, opaque, mat, frosted, embossed, printable, food-contact, medical, UV-stabilized ɛn spɛshal gred dɛn kin tɔk bɔt akɔdin to di strɔkchɔ we dɛn nid, di we aw dɛn de prosɛs ɛn di minim ɔda kwantiti.

Standart APET , PETG ɛn GAG prodak dɛn nɔ fɔ ɔtomɛtik diskrayb as ɔda UV gred, ay-baria pak, it-kɔntakt kɔmpliant, mɛdikal gred ɔ kɔmpitabl wit ɛvri PET risaykul strim. Dɛn prɔpati ya nid fɔ gɛt ɛksaktɔl matirial spɛsifikɛshɔn ɛn sɔpɔt tɛst dɔkyumentri.

Ɛksplɔrɔ ɔda tin dɛn HSQY PET sheet matirial prodak ɛn PETG sheet matirial sɔlvishɔn dɛn.

Rikwest APET PETG GAG Prayz    Rikwest Matirial Samples

APET , PETG ɛn GAG shit Fim Vidio

Wach di vidio dɔŋ ya fɔ rivyu HSQY PET sheet matirial fim dɛn, rol fɔmat dɛn, sheet matirial prodakshɔn ɛn tɛmfɔmin aplikeshɔn dɛn.

Wetin Na APET , PETG ɛn GAG shit s?

APET shit

APET min amorphous polyethylene tεrεftalεt. Na transparent rigid polyester sheet matirial we dɛn kin yuz fɔ blista pak, klamshɛl, trey dɛn , fɔlding bɔks ɛn ɔda thermoformed pakej.

APET nכmal wan de gi gud klia, stiffnεs, dimεnshכnal stεbiliti εn kכst efyushכn fכ ay-vכlyum pak prodakshכn.

PETG shit

PETG na glycol-modified copolyester sheet matirial we dεn divεlכp fכ ridyus kristכlayzeshn εn impruv tεmכfכm, impak rεsistεns, kכt, bεnd, print εn fכbrikεshכn.

Bɔku tɛm dɛn kin pik PETG fɔ dip drɔ, ditayl fɔm pat, transparent displei, ikwipmɛnt kɔva, spɛshal pak ɛn prɔdak dɛn we nid fɔ mek i nɔ chip ɔ krak.

GAG shit

GAG na tri-layer coextruded polyester sheet matirial we kכnsis fכ PETG כta skin dεm εn wan APET kכr.

Di PETG surface layers kin improve fom, bonding, printin en selekt siling proses, we di APET kor kin ridyus kos en giv stiffness.

Di PETG -to- APET layt rεshכ nɔto yunivasal. I fɔ pik akɔdin to di totɛl tik, drɔ dip, bonding we, siling prɔses, sɔfayz pefɔmɛns ɛn kɔst target.

APET vs PETG vs GAG Kɔmpiashɔn

APET PETG GAG shit Spɛsifikeshɔn dɛn

Faynal spɛsifikɛshɔn fɔ no di ɛksaktɔl matirial, rɛsin gred, layt strɔkchɔ, layt rɛsɛshɔn, tiknɛs tolɛreshɔn, dimɛnshɔn, sɔfays, kɔlɔ, protɛkshɔn fim ɛn di we aw dɛn want fɔ prosɛs.

GAG Lay Strukchɔ ɛn Lay Rɛshɔn

di wan dεm we de bay fכ spεsifa di tכtal tik we dεn nid εn di minim PETG skin tik pas fכ dip כnli pan di jεnarכl tεm GAG .

Tin PETG skin kin gi adekwat surface modifyeshכn fכ sכm folding-bכks aplikεshכn dεm, we dip tεmכfכm כ bכnd prכsεs kin nid difrεnt layεr rεshכ.

Tɛmofɔmin Pɔfɔmɛnshɔn

APET , PETG ɛn GAG ɔl kin bi tɛmfɔm, bɔt dɛn prɔsesin winda ɛn fɔm bihayvya difrɛn.

Fɔm trayal fɔ evaluate wɛb sag, itin yunifɔmiti, kaviti difinishɔn, wɔl-tiknɛs distribyushɔn, waytin, kristalizashɔn, shrinkage ɛn trim pefɔmɛns.

di prεdrying rikwaymεnt dεm dipכnt pan di εksakεt rεsin, sheet matirial stכrej kכndishכn, tiknes εn spכlayt instrכkshכn. Wan jenɛral stetmɛnt se ɔl gred dɛn kin fɔm we dɛn nɔ drɛy fɔ avɔyd.

Folding, Bonding ɛn Sial

PETG surface kin impruv di folding, bonding en selekt siling pefomans of GAG kompare wit wan standad APET surface.

di akchual pכrfomans dipכnt pan PETG skin tik, adhesive, ink, sכfayz tritmεnt, fold dεyshכn, skכring dip, tεmprachכ, prεshכn εn di tεm we i de de.

• Dɛn fɔ tɛst di day kɔt ɛn skɔ fɔ si if di ed krak ɛn wayt.

• Kol foldin fɔ evaluate fɔ spring-bak ɛn strɛs waytin.

• Adhesive bonding fɔ tɛst fɔ klia, trɛnk ɛn kemikal kɔmpatibiliti.

• Ha-frikyuɛnsi, ɔltrasɔnik ɔ tɛmal silin fɔ validet pan di aktual strɔkchɔ.

• Dɛn fɔ tɛst di say dɛn we dɛn print fɔ si if ink krak afta dɛn dɔn fol dɛn.

• Fɔ pak it ɛn mɛrɛsin nid fɔ gɛt aprɔv adhesive ɛn siling sistem.

Print ɛn Dɛkɔreshɔn

Aplikeshɔn fɔ APET , PETG ɛn GAG shit s

• Tεmכfכm pak: Blista, klamshεl, trey dɛn , insεt εn transparent kכva.

• Bɔks dɛn we dɛn kin fol: Transparent katon dɛn fɔ kɔsmɛtik, ilɛktronik tin dɛn, gift dɛn, tɔys dɛn ɛn tin dɛn fɔ yuz.

• Print pakej: UV ɔfset, skrin-printed ɛn dijital print plastic bɔks dɛn.

• Fɔ pak it: Tre ɛn kɔntena dɛn we de yuz gred we dɛn dɔn gri fɔ fɔ kɔntakt it.

• Mɛdikal pak: Trey, blista ɛn divays pak we de yuz validet mɛdikal gred.

• Displei: POP displei, rital fiks, prodak holda ɛn transparent panɛl.

• Di tin dɛn we de insay di kad: layers we dɛn print, ɔvlay, aydentifikeshɔn kad ɛn akses-kɔntrol kad.

• Protektiv kɔva: Ikwipmɛnt kɔva, mashin gad ɛn transparent haus dɛn we de yuz wan tik we fit.

• Fɛnichɔ kɔmpɔnɛnt dɛn: Dɛkɔretiv insɛt, shelf ɛlimɛnt ɛn displei panɛl.

Fɔd-Kɔntakt Pakɛj Rikwaymɛnt

APET , PETG εn GAG nכ fכ כtomatכk dεskrεb as fכd-kכntakt kompliant bays כnli pan di polimכr nem.

Fɔd-kɔntakt suitabiliti dipen pan di ɛksaktɔ rɛsin, kɔpɔlyɛsta kɔmpɔzishɔn, aditiv, risaykul kɔntinyu, kɔlɔrant, kɔtin, ink, adeziv ɛn prodakshɔn kɔntrol.

Di wan dɛn we de bay fɔ sho di kayn it, di tɛmpracha fɔ di kɔntakt, di tɛm we dɛn fɔ kɔntakt, di kɔndishɔn fɔ ɔt, di kɔndishɔn fɔ kip di it ɛn di rigyuleshɔn fɔ di ples-maket.

Maygrɛshɔn tɛst ɛn diklareshɔn fɔ aplay to di kɔmplit finish strɔkchɔ pas fɔ jɔs aplay to di bays rɛsin.

Standart ɛn Ay-Baria Pakɛj

Kad ɛn Aydentifikeshɔn Aplikeshɔn dɛn

PETG ɛn GAG kin yuz as print layers, ɔvlay, kɔr layers ɔ lamination kɔmpɔnɛnt dɛn na aydentifikeshɔn kad, akses-kɔntrol kad, lɔyalti kad ɛn spɛshal kad prodak.

sheet matirial nɔ fɔ diskraib as kɔmplit kredit kad ɔ pemɛnt kad we nɔ validet di ɔl kad strɔkchɔ.

Kad program kin nid difayn tik, shrink, print adheshon, lamination temperechur, peel trɛnk, bɛnd durabiliti, chip kɔmpatibiliti, magnɛtik-strayp kɔmpatibiliti ɛn sikyɔriti rikwaymɛnt.

Indo ɛn Ɔda Aplikeshɔn dɛn

Standard klia APET , PETG ɛn GAG sheet matirial s dɛn kin pik fɔs fɔ indo pak, printin, displei ɛn fabrik kɔmpɔnɛnt dɛn.

Sayn dɛn we de na do fɔ lɔng tɛm, kɔva ɔ panɛl dɛn nid fɔ gɛt gred we dɛn kɔl UV-stabilized ɔ UV-protected gred we dɛn kin yuz fɔ yuz.

Di wan dɛn we de bay fɔ tɔk bɔt di tɛm we dɛn de op fɔ de na do, di klaymat, di rayt-san layt, di kɔlɔ, di limit fɔ yɔlɔ, di we aw dɛn fɔ kip di glos ɛn di we aw dɛn fɔ tɛst di wɛda.

Stɛndad PETG skin dɛn na wan GAG sheet matirial nɔ fɔ ɔtomɛtik prɛzɛnt as wan dediket UV-protɛkshɔn layt.

Risaykul ɛn Matirial Identifyeshɔn

APET , PETG ɛn GAG nɔ fɔ sheb di sem risaykul klem ɔtomɛtik wan.

Standart APET thermoforms kin aksept in sɔm PET risaykul program, bɔt aktual akseptans dipen pan lokal sɔt, kɔlɛkshɔn ɛn prɔsesin infrastukchɔ.

PETG na amorphous copolyester ɛn i kin nɔ kɔmpitabl wit standad PET bɔtul risaykul prɔses.

GAG gɛt PETG sɔfays ɛn wan APET kɔr, so in kɔmpatibiliti fɔ ɛvaluet as kɔmplit maltilayer kɔnstrɔkshɔn.

Lɛbul, ink, adeziv, kɔtin, kɔlɔ ɛn komponent dɛn we dɛn ataya kin afɛkt bak fɔ sɔt ɛn risaykul.

Gaydlain fɔ Kɔt ɛn Fabrik

• Yuz shap gilɔtin, saw, router, panch ɔ stɛl-rul day.

• Sɔpɔt di sheet matirial we yu de kɔt fɔ ridyus vaybreshɔn ɛn edj krak.

• Konfam panch kliarens ɛn ed distans akɔdin to tik.

• Rimov di protɛktiv mask frɔm di say dɛn we dɛn dɔn ɔt fɔm we nid de.

• Test kol bending fɔ wayt, krak ɛn spring-bak.

• Selekt adhesives akɔdin to APET , PETG ɔ GAG sɔfayz kemistri.

• Dɛn fɔ yuz lɛsa kɔt nɔmɔ we dɛn dɔn validet di ɛksaktɔl matirial gred, ikwipmɛnt ɛn ɛkstrakshɔn sistɛm.

• Yuz di rayt ventilashɔn we yu de ɔt, wɛldin, bon ɛn print.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• Resin ɛn matirial-grɛd verifyeshɔn.

• APET , PETG ɔ GAG strɔkchɔ kɔnfɔmeshɔn.

• GAG totכl tiknes εn layεr-rεshכn inspekshכn.

• Tik ɛn tik tolɛreshɔn.

• Rol wit, sheet matirial dimɛnshɔn ɛn dayagɔnal tolɛreshɔn.

• Rol wet, rol lɔng, kɔr saiz ɛn wayndin kwaliti.

• Flatnɛs, kɔl, tɛliskɔp ɛn ed alaynɛshɔn.

• Layt transmishɔn, haz, tint ɛn glos.

• Blak spat, jel, bɔbul, flɔ layn ɛn kɔntaminɛshɔn.

• Tensile strength, elongation, modulus ɛn impak pefɔmɛns.

• Vicat softening ɛn ɔt-diflɛkshɔn pefɔmɛns.

• Tɛrmofɔmin winda ɛn sheet matirial sag.

• Draw dip, kaviti difinishɔn ɛn di wɔl-tiknɛs distribyushɔn.

• Krɔs, wayt ɛn shrink afta i dɔn fɔm.

• Printing adhesion ɛn curing kɔmpatibiliti.

• Day kot, skor ɛn fold pefɔmɛns.

• Adhesive bonding ɛn siling trɛnk.

• Fɔd-kɔntakt maykreshɔn ɔ mɛdikal-pakɛj tɛst usay dɛn nid am.

• UV-weda tɛst fɔ gred dɛn we de na do.

• Inspekshɔn fɔ pak, palet ɛn kɔntena-lod.

Kastom APET PETG GAG shit Opshɔn dɛn

• Tiknes frɔm lɛk 0.15mm to 3mm.

• Rol wit frɔm lɛk 110mm to 1280mm.

• 915 × 1220mm ɛn 1000 × 2000mm standad sheet matirial s.

• Kastamayz rol wit ɛn kɔt-to-sayz sheet matirial s.

• APET , PETG ɛn PETG /A PET/PE TG GAG strɔkchɔ dɛn.

• Kastamayz GAG PETG -skin ɛn APET -kɔr rεshɔn.

• Klia, tint, translucent ɛn opaque kɔlɔ dɛn.

• Glossy, mat, frosted ɛn ɛmbos sɔfays dɛn.

• Wan-sayd ɔ tu-sayd protɛktiv masking.

• Printin, folding-bɔks ɛn thermoforming gred dɛn.

• Fɔd-kɔntakt ɛn mɛdikal gred dɛn we dɛn gri fɔ.

• UV-stabilized, antistatic ɛn impak-modified gred dɛn.

• Virgin, risaykul-kɔntinɛnt ɛn kɔstɔmayz matirial opshɔn dɛn we de ɔnda validɛshɔn.

• Kastom lɛbl, rol, katon, palet ɛn shiping mak.

Infɔmeshɔn we Yu nid fɔ gɛt Kot

• APET , PETG ɔ GAG matirial.

• Rikwayd totɛl tik ɛn tolɛreshɔn.

• Rikwayd GAG layεr strכkchכ εn skin rεshכ.

• Rol wit ɔ sheet matirial dimɛnshɔn dɛn.

• Rikwayd rol lɔng, rol wet ɛn pepa kɔr.

• Klir, tint, translucent ɔ opaque apinans.

• Glos, mat, frɔst ɔ ɛmbos sɔfays.

• Protektiv-film rikwaymɛnt.

• Termoforming dip, mold dimɛnshɔn ɛn ikwipmɛnt.

• Print, fold, sial, bond ɔ fabrication prɔses.

• Fɔd-kɔntakt, mɛdikal, UV ɔ antistatik rikwaymɛnt dɛn.

• Rikwayd barɛri, OTR ɔ WVTR pefɔmɛns.

• Rikwayd risaykul-kɔntinɛnt pasɛnt.

• Rikwayd tɛst ripɔt ɛn dɛstineshɔn makɛt.

• Initial ɔda kwantiti ɛn ɛstimat ɛni ia dimand.

• Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu APET PETG GAG Rikwaymɛnt dɛn

Sɛtifiket ɛn Tɛst Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt tɛknikal data sheet matirial s, sefty data sheet matirial s, fizik-prɔpati ripɔt, ristrikt-sɔbstans ripɔt, fud-kɔntakt diklareshɔn, maykreshɔn ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Dɛn fɔ chɛk ɛni dɔkyumɛnt agens di rayt rɛsin, di matirial strɔkchɔ, tik, kɔlɔ, risaykul kɔntinyu, di say we dɛn mek am ɛn di we aw dɛn want fɔ yuz am.

SGS fɔ diskrayb akɔdin to di ɛksaktɔl tɛst skɔp ɛn dɛn nɔ fɔ prɛzɛnt am as yunivasal prodak sɛtifikeshɔn.

HSQY Globɛl Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

APET , PETG ɛn GAG prodakt dɛn kin saplae as rol, sheet matirial s ɔ kɔt pis akɔdin to di tik we dɛn nid ɛn kɔnvɔyt prɔses.

Rol prodakt kin rap wit PE film ɛn kraft pepa, we sheet matirial prodakt kin pak insay protɛktiv bag, katon ɔ pan rigid ɛkspɔt palet.

Pak spɛsifikɛshɔn fɔ no di rol wet, pepa-kɔr dayamita, ɔdasay dayamita, wayndin dairekshɔn, palet dimɛnshɔn, sheet matirial kɔnt ɛn maksimal palet wet.

Wetin Mek Yu Pik HSQY as Yu APET PETG GAG Splaya?

• APET , PETG ɛn PETG /A PET/PE TG GAG strɔkchɔ dɛn.

• Tiknes frɔm lɛk 0.15mm to 3mm.

• Rol wit frɔm lɛk 110mm to 1280mm.

• Standart ɛn kɔstɔmayz sheet matirial dimɛnshɔn dɛn.

• Kastomiz GAG layt rεshכn εn sכfayz strכkchכ.

• Klia, kɔlɔ, mat, frɔst ɛn ɛmbos prodak.

• Tɛmofɔmin, fɔl-bɔks, printin ɛn fabrikeshɔn gred dɛn.

• Sampul fɔ fɔm, print, bon ɛn sial ɛvalueshɔn.

• Kwaliti inspekshɔn akɔdin to di spɛsifikɛshɔn dɛn we dɛn dɔn gri fɔ.

• Kastomiz rol, sheet matirial s, palet ɛn ɛkspɔt pak.

Bifo bɔlk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di matirial we dɛn dɔn pik pan di kɔstɔma in aktual tɛmɔfɔmin, printin, day-kɔt, fɔlding, bɔnd ɛn silin ikwipmɛnt.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt APET PETG ɛn GAG shit s

Wetin na APET sheet matirial ?

APET na amorphous PET sheet matirial we dεn kin yuz fכ transparent tεmכfכm pak, trey dɛn , blista, klamshεl εn foldin bכks.

Wetin na PETG sheet matirial ?

PETG na glycol-modified copolyester sheet matirial we dεn dεn mek fכ impruv tεmכfכm, tכf, printin, bכnd εn fכbrikεshכn.

Wetin na GAG sheet matirial ?

GAG na tri-layer coextruded sheet matirial wit PETG ɔta skin ɛn wan APET kɔr.

APET , PETG ɛn GAG na di sem matirial?

Nɔ. APET ɛn PETG na difrɛn polyɛsta fɔmyulashɔn, we GAG na mɔltilayer strɔkchɔ we de kɔba PETG sɔfays wit APET kɔr.

Us matirial bɛtɛ fɔ thermoforming?

APET na kɔmɔn fɔ yuz fɔ ikɔnomik pak, PETG na in dɛn kin lɛk fɔ dip drɔ ɛn kɔmpleks ditil, ɛn GAG de gi balans bitwin PETG sɔfayz pefɔmɛns ɛn APET kɔst.

Wetin na di GAG layt strɔkchɔ?

Di standad diskripshɔn na PETG /A PET/PE TG, wit PETG pan ɔl tu di ɔda say dɛn ɛn APET na di sɛnt.

Di PETG ɛn APET layt rεshɔn fiks?

Nɔ. di layt rεshכ kin ajɔst akɔdin to tik, fכm dip, bכnd, siling, sכfayz pεrformεns εn kכst.

Us tik tik dɛn de?

di tik we de fכm de kכmכt frכm lεk 0.15mm to 3mm.

Us rol wit dɛn de?

Rol wit frɔm lɛk 110mm to 1280mm de.

Us sheet matirial saiz dɛn de?

Standart sheet matirial saiz dɛn inklud 915 × 1220mm ɛn 1000 × 2000mm, wit kɔstɔm saiz dɛn we de.

Yu tink se APET PETG ɛn GAG kin print?

Dɛn kin print di rayt gred dɛn na skrin, dɛn kin print dɛn UV ɔfset, dɛn kin print dɛn wit UV inkjet ɔ dɛn kin stamp dɛn wit ɔt afta dɛn dɔn tɛst dɛn fɔ adhesion ɛn curing.

Yu kin yuz GAG sheet matirial fɔ fold bɔks?

Yɛs. GAG na tin we dɛn kin pik fɔ transparent fɔlda bɔks dɛn we nid fɔ print, skɔ, fɔ fold ɛn adhesive bonding.

Yu tink se GAG sheet matirial kin ɔt sial?

Sεlekt GAG strכkchכ dεm kin sכpכt tεmכl, hεy-frikyuεns כ ultrasכnik silin, bכt di strכkchכ, ikwipment εn prכsεs kכndishכn dεm mכst tεst.

PETG nid fɔ prɛdray bifo tɛm fɔm?

Sɔm PETG sheet matirial gred dɛn kin fɔm we dɛn nɔ prɛdray we dɛn kip dɛn kɔrɛkt wan, bɔt dɛn fɔ fala di ɛksaktɔl instrɔkshɔn dɛn we di spɔlayt gi ɛn di mɔstɔ kɔndishɔn.

APET kin kristaliz di tεm we i de tεmכfכm?

If yu ɔt pasmak ɔ i nɔ ivin ɔt, i kin mek yu kristaliz, haz ɔ brit na APET , so dɛn fɔ kɔntrol tɛmpracha ɛn saykl tɛm.

PETG strɔng pas APET ?

PETG jεnarali de gi impruv tכfεs εn rεsistεns to krak, bכt εksakכt pεrformεns dipכnt pan di gred, tiknes εn tεst mεtכd.

PETG kin tek ples fɔ polikabɔnɛt?

PETG kin riples polycarbonate in sɔm displei, kɔva ɛn thermoformed pat, bɔt polycarbonate nɔmal fɔ gi ay ɔt ɛn impak pefɔmɛns.

PETG kin riples akrilik?

PETG kin izi fɔ fɔm ɛn nɔ kin chip pas standad akrilik, we akrilik kin gi bɛtɛ sɔfays hadnɛs ɛn lɔng tɛm ɔdasay weda.

Yu tink se standad PETG ɛn GAG sheet matirial s fit fɔ de na do?

Standart gred dɛn na men wan fɔ indo aplikeshɔn dɛn. Fɔ yuz am na do fɔ lɔng tɛm, yu nid fɔ gɛt gred we gɛt UV-stabilized ɔ UV-protected.

APET PETG ɛn GAG it sef?

Dɛn kin gi wan dediket it-kɔntakt gred we di rɛsin, aditiv, strɔkchɔ ɛn dɔkyumɛnt dɛn fayn fɔ di dɛstineshɔn makit ɛn di kɔndishɔn fɔ yuz.

Yu tink se dɛn tin ya fayn fɔ pak tin dɛn fɔ mɛn pipul dɛn?

Mɛdikal pak nid fɔ gɛt validet mɛdikal gred, kɔntrol prodakshɔn, traysabiliti, sterilayz kɔmpitibliti, pakej-intɛgriti tɛst ɛn rigyuletɔri dɔkyumentri.

APET PETG ɛn GAG na ay-baria matirial?

Standart gred nɔto ɔtomɛtik ay-baria matirial. Sεnsitiv prodakt kin nid EVOH, ACLAR, kכt כ כda barεri strכkchכ.

Yu tink se GAG kin diskrayb as mono- PET sheet matirial ?

GAG gɛt APET ɛn PETG , we ɔl tu na polyɛsta bɔt dɛn gɛt difrɛn kristalizashɔn ɛn risaykul bihayvya. Risaykul klem fɔ verify fɔ di kɔmplit strɔkchɔ.

PETG kompitibul wit di standad PET botul risaykul strim?

PETG kin nɔ kɔmpitabl wit standad PET bɔtul risaykul bikɔs in kristalizashɔn ɛn mɛlt bihayvya difrɛn frɔm kɔntena-grɛd PET .

Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul?

Risaykul-kɔntinɛnt opshɔn dɛn kin evalyu akɔdin to klia, kɔlɔ, kɔntaminɛshɔn, mɛkanikal pefɔmɛns, it-kɔntakt rikwaymɛnt ɛn kɔstɔma spɛsifikɛshɔn.

Yu kin yuz PETG ɔ GAG fɔ kredit kad?

PETG ɛn GAG kin yuz as layt ɔ kɔmpɔnɛnt dɛn na kad prodak, bɔt kɔmplit pemɛnt kad dɛn nid sɛpret strɔkchɔral, sikyɔriti ɛn pefɔmɛns validɛshɔn.

Yu tink se fim we de protɛkt pɔsin de?

Wan-sayd ɔ tu-sayd protɛktiv mask kin saplae fɔ sɔm sheet matirial tiknes ɛn aplikeshɔn dɛn.

Wetin na di minimum ɔda kwantiti?

Di rεfrεns minim כda kwantiti na aprכksimatli 2000kg. Kastom strɔkchɔ, kɔlɔ ɛn spɛshal gred kin nid difrɛn MOQ.

Yu tink se sampul dɛn de?

A4 sheet matirial s ɛn kɔt sɛmpul dɛn we dɔn de kin de. Kastamayz GAG strɔkchɔ dɛn kin nid fɔ tray fɔ prodyuz.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di matirial, strɔkchɔ, tik, dimɛnshɔn, kɔlɔ, sɔfa, aplikeshɔn, fɔm prɔses, spɛshal rikwaymɛnt, kwantiti, pak ɛn ples fɔ go.

Gɛt wan APET PETG GAG shit Kɔt

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae APET sheet matirial s, PETG sheet matirial s, GAG sheet matirial s, PET thermoforming film, PVC sheet matirial s, PP sheet matirial s ɛn kɔstɔmayz plastic matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt pak kɔnvɔta, thermoforming kɔmni, folding-bɔks manifakta, printa, kad prodyusɔ, displei manifakta, impɔta ɛn distribyushɔn wit matirial sɛlɛkshɔn, sampul tɛst, kɔstɔmayz prodakshɔn, kwaliti inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ kot di prayz ɛn Sampul