Klia APET shit & Rol fɔ Tɛmofɔmin

HSQY klia APET sheet matirial ɛn rol na ay-klariti rigid PET matirial fɔ thermoforming, blister pak, folding bɔks, it trey dɛn ɛn ɔda transparent pak aplikeshɔn.

APET , ɔ amorphous polyethylene terephthalate, de kam togɛda transparency, rigidity ɛn thermoforming kapabiliti fɔ kɔnvɔta dɛn we nid klia pak we de alaw di prodak we dɛn pak fɔ kɔntinyu fɔ si.

Di listed prodakt rεnj kɔba 0.1–3mm tiknɛs, wit we go rich 1300mm ɛn klia-grɛd transparency we at le 92%, wit glos, mat ɛn frɔst sɔfays opshɔn. Di wan dɛn we de bay fɔ spɛsifa rol ɔ sheet matirial fɔmat, tiknɛs tolɛreshɔn, wit, fɔm prɔses, sɔfayz rikwaymɛnt ɛn fayn aplikeshɔn bifo bɔlk prodakshɔn.

Klia APET shit & Rol Vidio

Klia APET shit Imej

Klia APET Teknik Data Shit

Klia APET shit Spɛsifikeshɔn dɛn

Wetin Na Klia APET shit ?

APET na amorphous polyethylene terephthalate, wan klia rigid polyester we dεn kin kכmכn kכnvכlt to transparent pak bay tεmכfכm, kכt, fכld εn כda fכbrikshכn prכsεs dεm.

Nɔ lɛk CPET , we de yuz kristaliz PET strɔkchɔ fɔ validet ay-tɛmpracha aplikeshɔn, APET na di fɔs wan we dɛn pik fɔ klia pak usay transparency, rigiditi ɛn kɔvɛnshɔnal tɛmfɔmin pefɔmɛns nid fɔ de.

APET fɔ difrɛns bak frɔm PETG ɛn GAG bikɔs dɛn PET -famili matirial ya gɛt difrɛn rɛsin strɔkchɔ, fɔm bihayvya, bɔndin kwaliti ɛn aplikeshɔn dairekshɔn.

Klia APET Rol fɔ Tɛmofɔmin

Rollstock APET na patikyular we fit fכ kכntinyu tεmכfכm layn dεm we de prodyuz trey dɛn , klamshεl, blista εn כda ripit pak kכmכpכnεnt dεm.

Fɔ rol-fed thermoforming, di wan dɛn we de bay fɔ spɛsifa mɔ pas tik ɛn waid. Kor insay dayamita, rol ausayd dayamita, rol wet, wayndin dairekshɔn, sɔfa sayd, edj kwaliti ɛn alawable splais rikwaymɛnt ɔl kin afɛkt prodakshɔn-layn kɔmpatibiliti.

Trayal matirial fɔ evaluate pan di intended thermoforming mashin bifo wan big prodakshɔn ɔda usay drɔ dip, ɔtput spid ɔ optik rikwaymɛnt impɔtant.

APET shit fɔ Kɔt-Shit Tɛmofɔmin

APET kin saplae ɔ kɔnvɔyt bak as wan wan sheet matirial s fɔ ikwipmɛnt we de prosɛs kɔt sheet matirial pas fɔ kɔntinyu fɔ rolstɔk.

Di wan dɛn we de bay fɔ kɔt- sheet matirial fɔ spɛsifa sheet matirial lɔng ɛn waid, tiknɛs tolɛreshɔn, flatnɛs, sɔfa protɛkshɔn ɛn stak rikwaymɛnt dɛn akɔdin to di fidin sistɛm we dɛn yuz pan dɛn fɔm ɔ fabrikeshɔn ikwipmɛnt.

APET fɔ Vaykum Fɔm

Klia APET kin evaluet fɔ vaykum fɔm insay transparent pak ɛn fabricated kɔmpɔnɛnt usay prodak visibiliti impɔtant.

Start- sheet matirial tiknes fכ sεlekt akɔdin to di kaviti dip, dro rεshכ, kכna jכmetri εn di minim wכl tik we dεn nid na di pat we dεn finish biכs di mεtirial de tכn as i de strεch we i de fכm.

Tɛmofɔmin Prɔses Kɔnsidɛreshɔn dɛn

APET shit fɔ Blista Pakɛj

Blister pak na wan pan di praymar aplikeshכn fכ klia APET biכs di mεtirial kin kכmbayn prodakt visibiliti wit sufayf rigiditi fכ fכm kεviti εn displei pak.

Blista kɔnvɔta dɛn fɔ spɛsifa di kaviti dimɛnshɔn, fɔm dip, flɛnch dimɛnshɔn, pak-prɔdak wet, bak-kad ɔ siling we, sɔfays rikwaymɛnt ɛn ɛkspɛkt pakej hanlin kɔndishɔn.

APET shit fɔ Folding Bɔks dɛn

Klia APET kin chenj to transparent folding bɔks, sliv, winda ɛn rital pak usay dɛn nid fɔ si ful ɔ pat pan di prɔdak.

Fɔl-bɔks aplikeshɔn dɛn fɔ evalyu fɔ skɔ, fold, day kɔt, print, sɔfa protɛkshɔn ɛn fold apinans. Material orienteshɔn ɛn prɔsesin kɔndishɔn kin afɛkt kris ɛn fold pefɔmɛns.

Klia APET fɔ Fud tre s

Fɔd trey dɛn de insay di aplikeshɔn dɛn we dɛn dɔn list fɔ dis APET prodak rɛnj. Klia PET de gi visibiliti fɔ fayn chill, ambient ɛn ɔda pak aplikeshɔn usay di gred we dɛn pik de sɔpɔt fɔ di it-kɔntakt kɔndishɔn dɛn we dɛn want.

Fɔ pak di it, di wan dɛn we de bay fɔ tɔk bɔt di kayn it, dairekt ɔ indayrɛkt kɔntakt, filin tɛmpracha, stɔrɔj ​​tɛmpracha, stɔrɔj ​​tɛmpracha ɛn di dɛstineshɔn makit ɛn aks fɔ dɔkyumɛnt fɔ di ɛksaktɔl kɔnstrɔkshɔn we dɛn gi.

APET fɔ Klamshɛl Pakɛj

Klia APET rolstɔk kin evalyu fɔ klamshɛl pak we dɛn kin yuz fɔ prodyuz, bekeri prodak, kɔshɔma guds ɛn ɔda rital prodak we nid transparent displei pak.

Hinj jɔyometri, kloz dizayn, kaviti dip ɛn finish-pakɛj stiffnɛs fɔ inklud insay matirial trayal bikɔs dɛn tin ya kin inflɔws di tik we dɛn nid fɔ stat ɛn fɔm kɔndishɔn.

APET fɔ Klia Ritayl Pakɛj

Di listed ≥92% transparency mek klia APET rilevɛns to rital pak usay prodak visibiliti na impɔtant pat pan prɛzɛntɛnshɔn.

Usay optik kwaliti impɔtant, di wan dɛn we de bay fɔ difayn transmishɔn, haz, glos, tint ɛn akseptabl sɔfays dɛfɛkt pas fɔ abop pan diskriptiv wɔd dɛn nɔmɔ lɛk 'krɔs klia.'

Glossy, Matte ɛn Frɔsted APET Sɔfays dɛn

Sɔfayz tɛm dɛn fɔ sɔpɔt bay wan aprɔv sampul ɔ mɛzhɔbal glos ɛn haz rikwaymɛnt usay apiyans kɔnsistɛns impɔtant.

APET shit fɔ Print

APET kin evalyu fɔ print fɔlding bɔks, displei pak, lɛbl, kɔva ɛn grafik we di matirial sɔfa kɔmpitabl wit di ink ɛn printin prɔses we dɛn want.

Di kɔnvɔta dɛn fɔ spɛsifa di we aw dɛn de print, di ink kemistri, di sayd we dɛn dɔn trit, di we aw dɛn de mɛn ɛn di adheshon we dɛn nid. Dɛn fɔ tɛst di prodakshɔn matirial na di rial printin layn bifo dɛn mek big ripit ɔda.

APET Nid fɔ Dray bifo tɛm?

Pri-drying rikwaymɛnt fɔ kɔnfyus akɔdin to di ɛksaktɔ APET gred, matirial mɔstɔ, stɔrɔj ​​kɔndishɔn, sheet matirial tiknes ɛn fɔm prɔses.

Sɔm APET tɛmfɔmin ɔpreshɔn kin prosɛs kɔrɛkt wan we dɛn dɔn kip sheet matirial we nɔ gɛt sɛpret prɛ-dray stej, we ɔda kɔndishɔn dɛn kin nid fɔ kɔntrol mɔstɔ. Di wan dɛn we de bay fɔ fala di tɛknikal gayd fɔ di gred we dɛn gi ɛn validet am na dɛn prodakshɔn layn.

APET vs PETG vs GAG

APET vs. PVC fɔ Klia Pakɛj

כl tu APET εn PVC kin yuz in klia tεmכfכm εn fold-bכks aplikεshכn, bכt dεn gεt difrεn polimכr kεmεstri, fכm bihayv, siling opshכn εn εnd-כf-layf kכnsidεreshכn.

APET nɔ fɔ ɔtomɛtik bi se i bɛtɛ fɔ ɛvri aplikeshɔn. Di wan dɛn we de bay fɔ kɔmpia di klia we dɛn nid, stiffness, fɔm prɔses, printabiliti, siling, rigyuletɔri rikwaymɛnt, risaykul infrastukchɔ ɛn totɛl kɔnvɔyt-pakɛj pefɔmɛns.

Fɔd-Kɔntakt Aplikeshɔn dɛn

Fɔd-kɔntakt dɔkyumentri de na di list fɔ dis APET prodak rɛnj. Fɔ pak it, aks fɔ di kɔrɛnt dɔkyumɛnt dɛn we apɔynt to di ɛksaktɔl rɛsin, aditiv, risaykul-kɔntinɛnt lɛvɛl if ɛni wan de, tik ɛn dɛstineshɔn makɛt.

Dɛn nɔ fɔ trit jenɛral faktri sɛtifiket ɔ kwaliti-mɛnejmɛnt sɛtifiket as sɔntin we go tek ples fɔ di prɔdak-spɛsifi k it-kɔntakt dɔkyumentri.

Yu tink se APET fud tre kin bi Hɛt Sial?

If wan fɔm APET tre kin rili sial dipen pan di tre sɔfays, lid-film kɔnstrɔkshɔn, silin layt, kɔtin, silin tɛmpracha, prɛshɔn, tɛm fɔ de ɛn di pefɔmɛns we dɛn nid fɔ pul ɔ lɔk-sil.

If tre siling nid fɔ de, gi di liding film ɛn siling-mashin kɔndishɔn dɛn we yu want. Plɛn APET rolstɔk nɔ fɔ ɔtomɛtik asum se i kɔmpitabl wit ɛvri lid sistɛm.

APET Risayklɛbiliti Kɔnsidɛreshɔn

APET na pat pan di PET polimכr famili εn i kin enta PET risaykul strim usay di lokal kכlekshכn εn prכsεsin sistεm de aksept di spεsifi k tεmכfכm pak fכmat.

Aktual risaykulbiliti dipen pan di paket dizayn, lɛbl, adeziv, kɔtin, mɔltilayer kɔmpɔnɛnt dɛn, kɔntaminɛshɔn ɛn lokal risaykul infrastukchɔ. Baya dɛn wit risaykul tarɛkt fɔ evaluate di kɔmplit finish pakej pas di bays sheet matirial nɔmɔ.

Pik APET Tiknɛs

di listed ova ol rεnj na 0.1–3mm. Faynal gej fɔ pik akɔdin to di aktual pakej jɔyometri ɛn prɔsesin kɔndishɔn pas aplikeshɔn nem nɔmɔ.

Aw fɔ Spɛsifik Klia APET Rol Stɔk

Sɛtifiket ɛn Dokumɛnt

SGS, ISO 9001:2008 ɛn it-kɔntakt dɔkyumentri de na di list fɔ di prɔdak rɛnj. Di wan dɛn we de bay fɔ aks fɔ di kɔpi dɛn we de naw ɛn chɛk di ɔganayzeshɔn we de gi di kɔpi, di validiti, di skɔp ɛn di aplikebiliti to di ɛksaktɔl APET gred we dɛn de ɔda.

HSQY Globɛl Ɛgzibishin dɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Klia APET shit

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae APET sheet matirial s, PET film ɛn rilat plastic matirial to tɛmɔfɔma, pak kɔnvɔta, fud pak manifakta, printa, distribyushɔn ɛn ɔda pɔshɔnal bayer.

Fɔ klia APET sheet matirial ɛn rol projɛkt, gi di tiknes, wit, rol ɔ sheet matirial fɔmat we dɛn nid, fɔm prɔses, sɔfa, ɔptik rikwaymɛnt, finish-pakɛj dizayn, kwantiti ɛn dɛstineshɔn so di aprɔpriet spɛsifikɛshɔn kin rivyu.