PET Krataa a Wɔde Sini a Wɔabom ayɛ APET PETG GAG

APET, PETG ne GAG ​​Nkratafa Sini a Wɔde Yɛ Thermoforming

HSQY yɛ APET, PETG ne GAG ​​krataa sini a emu da hɔ na ɛwɔ kɔla ma thermoformed packaging, folding boxes, printed plastic products, display components, card overlays, protective covers ne customized plastic fabrication.

APET, PETG ne GAG ​​yɛ polyester krataa nneɛma a ɛfa ho, nanso enni nea wɔahyehyɛ anaa dwumadie suban koro.

APET yɛ PET krataa a ɛnyɛ nsɛ a wɔtaa paw ma nneɛma a wɔde kyekyere nneɛma a ɛda adi pefee ne thermoforming a ɛho ka sua. PETG yɛ glycol-modified copolyester a wɔayɛ ama nkɔsoɔ formability, toughness, fabrication ne deep-draw adwumayɛ.

GAG yɛ krataa a ɛwɔ ntoatoaso abiɛsa a wɔde coextruded a PETG akyi were ne APET core. Adansi no ka PETG dwumadie ne ne soro su ne APET mfimfini layer a ɛyɛ den ne ɛka a wɔbɔ no bom.

Nsuo a ɛwɔ hɔ no firi bɛyɛ 0.15mm kɔsi 3mm. Roll trɛw fi bɛyɛ 110mm kosi 1280mm, bere a standard sheet dimensions no bi ne 915 × 1220mm ne 1000 × 2000mm.

Wobetumi aka transparent, tinted, opaque, matte, frosted, embossed, printable, aduan-di nkitaho, aduruyɛ, UV-stabilized ne specialty grades ho asɛm sɛnea wɔhwehwɛ nhyehyɛe, processing kwan ne minimum order dodow.

Ɛnsɛ sɛ wɔka APET, PETG ne GAG ​​nneɛma a wɔahyɛ da ayɛ no ho asɛm ara kwa sɛ abɔnten so UV grades, akwanside kɛse a wɔde kyekyere nneɛma, ɛne aduan a wɔde di nkitaho hyia, aduruyɛ grade anaasɛ ɛne PET recycling stream biara hyia. Saa agyapadeɛ yi hwehwɛ sɛ wɔkyerɛkyerɛ nneɛma no mu pɛpɛɛpɛ ne sɔhwɛ ho nkrataa a ɛfoa so.

Hwehwɛ nneɛma foforo mu HSQY PET krataa nneɛma ne PETG krataa ano aduru.

Bisa APET PETG GAG Bo a Wɔbɔ    Bisa Nneɛma a Wɔde Yɛ Nhwɛsode

APET, PETG ne GAG ​​Nkratafa Sini Video

Hwɛ video a ɛwɔ aseɛ ha no na hwɛ HSQY PET krataa sini, roll formats, krataa a wɔyɛ ne thermoforming dwumadie.

Dɛn Ne APET, PETG ne GAG ​​Nkrataa?

APET Krataa a Wɔde Di Dwuma

APET kyerɛ polyethylene terephthalate a ɛnyɛ nea ɛwɔ nipadua no mu. Ɛyɛ polyester krataa a ɛyɛ den a ɛda adi pefee a wɔtaa de yɛ blister packs, clamshells, trays, folding boxes ne thermoformed packaging afoforo.

APET taa ma pefeeyɛ pa, stiffness, dimensional stability ne ɛka a wɔbɔ ma high-volume packaging production.

PETG Krataa a Wɔde Di Dwuma

PETG yɛ glycol-modified copolyester krataa a wɔayɛ sɛ ɛbɛtew crystallization so na ama thermoforming, impact resistance, twa, bending, printing ne fabrication atu mpɔn.

Wɔtaa paw PETG ma deep draws, detailed formed parts, transparent displays, equipment covers, specialty packaging ne nneɛma a ɛhwehwɛ sɛ ɛko tia chipping anaa mpaapaemu.

GAG Krataa a Wɔde Di Dwuma

GAG yɛ polyester krataa a ɛwɔ ntoatoaso abiɛsa a wɔde coextruded a ɛyɛ PETG akyi were ne APET core.

PETG surface layers no betumi ama forming, bonding, printing ne selected sealing processes atu mpɔn, bere a APET core no betumi atew ɛka so na ama stiffness.

PETG-to-APET layer ratio no nyɛ amansan nyinaa de. Ɛsɛ sɛ wɔpaw no sɛnea ne nyinaa mu duru, twetwe bun, bonding kwan, sealing nhyehyɛe, soro adwumayɛ ne ɛka botae.

APET ne PETG ne GAG ​​Ntotoho

APET PETG GAG Krataa no ho nsɛm

Ɛsɛ sɛ nkyerɛkyerɛmu a etwa to no kyerɛ ade pɔtee, resin grade, layer nhyehyɛe, layer ratio, thickness tolerance, nsusuwii, soro, kɔla, ahobammɔ film ne ɔkwan a wɔpɛ sɛ wɔfa so yɛ adwuma.

GAG Layer Nhyehyɛe ne Layer Ratio

Ɛsɛ sɛ adetɔfo kyerɛ PETG honam ani duru nyinaa a wɔhwehwɛ ne nea ɛba fam koraa sen sɛ wɔde wɔn ho bɛto asɛmfua GAG a wɔde di dwuma wɔ ɔkwan a ɛkɔ akyiri so nkutoo so.

PETG nwoma a ɛyɛ tratraa betumi ama nsakrae a ɛfata aba ɔfasu so ama folding-box applications binom, bere a thermoforming anaa bonding akwan a emu dɔ betumi ahwehwɛ sɛ wɔyɛ layer ratio soronko.

Thermoforming Adwumayɛ a Wɔde Yɛ Adwuma

APET, PETG ne GAG ​​nyinaa betumi ayɛ thermoformed, nanso wɔn processing windows ne forming suban yɛ soronko.

Ɛsɛ sɛ sɔhwɛ ahorow a wɔyɛ no hwehwɛ wɛb sag, ɔhyew a ɛyɛ pɛ, abura nkyerɛase, ɔfasu-kɛseɛ kyekyɛ, fitaa, crystallization, shrinkage ne trimming adwumayɛ.

Predrying ahwehwɛde gyina resin pɛpɛɛpɛ, krataa a wɔkora so tebea, thickness ne supplier akwankyerɛ. Ɛsɛ sɛ wɔkwati asɛm a wɔka wɔ ɔkwan a ɛkɔ akyiri so sɛ wobetumi ayɛ grade ahorow nyinaa a wɔmfa nyow.

Folding, Bonding ne Nsɔano

PETG soro betumi ama GAG folding, bonding ne selected sealing adwumayɛ atu mpɔn sɛ wɔde toto standard APET surface ho a.

Adwumayɛ ankasa gyina PETG honam ani duru, adhesive, ink, soro ayaresa, fold akwankyerɛ, scoring bun, ɔhyew, nhyɛso ne tra bere.

• Ɛsɛ sɛ wɔsɔ die cutting ne scoring hwɛ sɛ ebia anoano mu apaapae na ayɛ fitaa anaa.

• Ɛsɛ sɛ wɔsɔ cold folding hwɛ sɛ spring-back ne stress whitening anaa.

• Ɛsɛ sɛ wɔsɔ adhesive bonding hwɛ sɛ emu da hɔ, ahoɔden ne nnuru a ɛne ne ho hyia anaa.

• Ɛsɛ sɛ wogye tom sɛ wɔde frequency a ɛkorɔn, ultrasonic anaa thermal sealing di dwuma wɔ nhyehyɛe ankasa no so.

• Ɛsɛ sɛ wɔsɔ mmeae a wɔatintim no hwɛ sɛ ink apaapae bere a wɔabobɔw awie no.

• Aduan ne nnuru a wɔde kyekyere nneɛma ho hia sɛ wɔde nneɛma a wɔde nkata so ne nea wɔde kata so a wɔapene so.

Ntintim ne Nneɛma a Wɔde Siesie

APET, PETG ne GAG ​​Nkrataa a wɔde di dwuma

• Thermoformed packaging: Nsuo a ɛyɛ kurukuruwa, clamshells, trays, inserts ne nkatasoɔ a ɛda adi.

• Nnaka a wɔbobɔw: Nnaka a ɛyɛ mmerɛw a wɔde yɛ ahosiesie, ɛlɛtrɔnik mfiri, akyɛde, agode ne nneɛma a wɔde di dwuma.

• Nneɛma a wɔde kyekyere nneɛma: UV offset, screen-printed ne dijitaal tintim plastic nnaka.

• Aduan a wɔde kyekyere nneɛma: Tray ne nsukorade a wɔde aduan a wɔde di nkitaho a wɔapene so di dwuma.

• Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma: Trays, blisters ne mfiri a wɔde kyekyere nneɛma a wɔde aduruyɛ mu abasobɔde a wɔagye atom di dwuma.

• Nneɛma a wɔde kyerɛ: POP nneɛma a wɔde kyerɛ, nneɛma a wɔde di dwuma wɔ aguadidan mu, nneɛma a wɔde kura nneɛma ne panels a ɛda adi pefee.

• Kaad no afã horow: Layers a wɔatintim, overlays, identification cards ne access-control cards.

• Akatasoɔ a ɛbɔ ho ban: Nnwinnadeɛ katasoɔ, mfiri awɛmfoɔ ne adan a ɛda adi a wɔde ne kɛseɛ a ɛfata di dwuma.

• Nneɛma a wɔde yɛ dan mu nneɛma: Nneɛma a wɔde siesie fie, nneɛma a wɔde hyɛ shelf ne nneɛma a wɔde kyerɛ.

Aduan a Wɔde Di Dwuma Ho Ahwehwɛde Ahorow

Ɛnsɛ sɛ wɔkyerɛkyerɛ APET, PETG ne GAG ​​mu ara kwa sɛ ɛne aduan a wɔde di nkitaho hyia a egyina polymer din no nkutoo so.

Aduan a wɔde di nkitaho a ɛfata no gyina resin pɔtee, copolyester a ɛwɔ mu, nneɛma a wɔde ka ho, nneɛma a wɔasan de adi dwuma, kɔla, nneɛma a wɔde kata so, ink, ade a wɔde nkata so ne nneɛma a wɔde di dwuma so.

Ɛsɛ sɛ adetɔfo kyerɛ aduan ko, ɔhyew a wɔde di nkitaho, bere tenten a wɔde di nkitaho, ɔhyew tebea, tebea a wɔde sie ne baabi a wɔrekɔ-gua ho mmara.

Ɛsɛ sɛ atutra sɔhwɛ ne mpaemuka ahorow fa ɔdan a wɔawie no nyinaa ho sen sɛ wɔde bedi dwuma wɔ nnyinaso resin no nkutoo ho.

Standard ne High-Barrier Packaging a wɔde ahyɛ mu

Kaad ne Identification Applications a Wɔde Di Dwuma

Wobetumi de PETG ne GAG ​​adi dwuma sɛ layers a wɔatintim, overlays, core layers anaa lamination components wɔ identification cards, access-control cards, loyalty cards ne specialty card products mu.

Ɛnsɛ sɛ wɔka krataa bi ho asɛm sɛ ɛyɛ credit card anaa sikatua kaad a edi mũ a wɔmfa kaad nhyehyɛe no nyinaa nyɛ nokware.

Kaad nhyehyɛe ahorow betumi ahwehwɛ sɛ wɔakyerɛkyerɛ mu kɛse, shrinkage, print adhesion, lamination temperature, peel ahoɔden, bending durability, chip compatibility, magnetic-stripe compatibility ne ahobammɔ ahwehwɛde ahorow.

Nnwuma a Wɔde Di Dwuma wɔ Dan Mu ne Abɔnten

Standard clear APET, PETG ne GAG ​​nkrataa no titiriw na wɔpaw ma dan mu packaging, tintim, displays ne fabricated components.

Abɔnten so nsɛnkyerɛnne, nkataso anaa panels a ɛtra hɔ kyɛ no hwehwɛ sɛ wɔde UV-stabilized anaa UV-protected grade a wɔde di dwuma pɔtee bi di dwuma.

Ɛsɛ sɛ adetɔfo kyerɛ bere a wɔhwɛ kwan sɛ wɔbɛkɔ abɔnten, wim tebea, owia hann a ɛbɛba tẽẽ, kɔla, anohyeto a ɛbɛma ayɛ kɔkɔɔ, ahwehwɛde a ɛfa gloss-retention ne ɔkwan a wɔfa so sɔ wim tebea hwɛ.

Ɛnsɛ sɛ wɔde standard PETG skins a ɛwɔ GAG krataa mu no kyerɛ ara kwa sɛ UV-protection layer a wɔatu ho ama.

Nneɛma a Wɔsan De Di Dwuma ne Nneɛma a Wɔde Hu

Ɛnsɛ sɛ APET, PETG ne GAG ​​kyɛ sika koro no ara a ɛfa nneɛma a wɔde di dwuma bio ho.

Wobetumi agye APET thermoforms a wɔahyɛ da ayɛ no atom wɔ PET recycling nhyehyɛe ahorow bi mu, nanso gye ankasa gyina mpɔtam hɔ nhyehyɛe a wɔde hyehyɛ, boaboa ano ne nea wɔde di dwuma so.

PETG yɛ amorphous copolyester na ebia ɛne PET toa a wɔsan de di dwuma a wɔtaa yɛ no nhyia.

GAG kura PETG surfaces ne APET core, enti ɛsɛ sɛ wɔsɔ ne hyia hwɛ sɛ multilayer adansi a edi mũ.

Nkyerɛwde, ink, ade a wɔde nkata so, nneɛma a wɔde kata so, kɔla ne nneɛma a wɔde abata ho nso betumi aka sɛnea wɔhyehyɛ ne nea wɔsan de di dwuma bio.

Akwankyerɛ a ɛfa Twitwa ne Nneɛma a Wɔyɛ ho

• Fa guillotines a ano yɛ nnam, saws, routers, punches anaa steel-rule dies di dwuma.

• Boa krataa no bere a woretwitwa no na ama wosow ne anoano mpaapaemu so atew.

• Si punch clearance ne edge distance no so dua sɛnea ne kɛse te.

• Yi akataso a ɛbɔ ho ban fi mmeae a ɛyɛ hyew a ɛyɛ hyew bere a ɛho hia no.

• Sɔ awɔw mu bending hwɛ sɛ ɛyɛ fitaa, mpaapaemu ne spring-back.

• Paw adhesives sɛnea APET, PETG anaa GAG surface chemistry kyerɛ.

• Ɛsɛ sɛ wɔde laser twa di dwuma bere a wɔagye nneɛma no grade pɔtee, nnwinnade ne nhyehyɛe a wɔde yiyi mu no atom nkutoo.

• Fa mframa a ɛfata di dwuma bere a woreyɛ hyew, woreyɛ welding, woreyɛ bonding na woretintim no.

Sɔhwɛ ahorow a Wɔkamfo Kyerɛ a Wɔde Hwɛ Nneɛma a Ɛyɛ Paara So

• Resin ne nneɛma-grade nokwaredi.

• APET, PETG anaa GAG nhyehyɛe a wɔde si so dua.

• GAG nyinaa thickness ne layer-ratio nhwehwɛmu.

• Thickness ne thickness a wotumi gyina ano.

• Roll trɛw, krataa nsusuwii ne diagonal tolerance.

• Roll mu duru, roll tenten, core kɛse ne winding su.

• Flatness, curl, telescoping ne ano a ɛne ne ho hyia.

• Hann a ɛkɔ, haze, tint ne gloss.

• Nsonsonoe tuntum, gel, ahurututu, nhama a ɛsen ne efĩ.

• Tensile ahoɔden, elongation, modulus ne impact adwumayɛ.

• Vicat softening ne ɔhyew-deflection adwumayɛ.

• Thermoforming mfɛnsere ne krataa sag.

• Twe bun, cavity nkyerɛase ne ɔfasu-thickness kyekyɛ.

• Crystallization, fitaa ne shrinkage bere a wɔayɛ akyi.

• Printing adhesion ne curing a ɛne ne ho hyia.

• Die twa, scoring ne folding adwumayɛ.

• Adhesive bonding ne sealing ahoɔden.

• Aduan a wɔde di nkitaho a wotu kɔtra baabi foforo anaasɛ aduruyɛ mu nneɛma a wɔde ahyɛ mu ho sɔhwɛ wɔ baabi a ɛho hia.

• UV-weathering sɔhwɛ ahorow a wɔde hwehwɛ abɔnten so abasobɔde ahorow.

• Packing, pallet ne container-loading nhwehwɛmu.

APET PETG GAG Krataa a Wɔapaw no Amanneɛbɔ

• Ne kɛse fi bɛyɛ 0.15mm kosi 3mm.

• Roll trɛw fi bɛyɛ 110mm kosi 1280mm.

• 915 × 1220mm ne 1000 × 2000mm gyinapɛn nkrataa.

• Nkratafa a wɔayɛ no sɛnea wɔpɛ ne nkratafa a wɔatwa no sɛnea ne kɛse te.

• APET, PETG ne PETG/APET/PETG GAG nhyehyɛe ahorow.

• GAG PETG-honam ani ne APET-core ratios a wɔayɛ no sɛnea wɔpɛ.

• Kɔla ahorow a emu da hɔ, tint, translucent na opaque.

• Glossy, matte, frosted ne embossed soro.

• Ɔfã biako anaa ɔfã abien ahobammɔ masking.

• Ntintim, folding-box ne thermoforming grades.

• Aduan a wɔde di nkitaho ne aduruyɛ mu abasobɔde ahorow a ɛsɛ sɛ wɔpene so.

• UV-a ɛyɛ den, antistatic ne impact-modified grades.

• Virgin, recycled-content ne customized nneɛma a wɔpaw a ɛgyina validation so.

• Amanneɛbɔ labels, rolls, cartons, pallets ne po so hyɛn agyiraehyɛde.

Nsɛm a Ɛho Hia ma Nsɛm a Wɔafa Ka

• APET, PETG anaa GAG nneɛma.

• Ɛhwehwɛ sɛ ne nyinaa yɛ kɛse na ɛma wotumi gyina ano.

• GAG layer nhyehyɛe ne honam ani nsusuwii a wɔhwehwɛ.

• Roll trɛw anaa krataa no nsusuwii.

• Ahwehwɛde roll tenten, roll mu duru ne krataa core.

• Ɛda adi pefee, tint, translucent anaasɛ opaque hwɛbea.

• Glossy, matte, frosted anaasɛ embossed soro.

• Protective-film ahwehwɛde.

• Thermoforming bun, nkuku nsusuwii ne nnwinnade.

• Printing, folding, sealing, bonding anaa fabrication nhyehyɛe.

• Aduan a wɔde di nkitaho, aduruyɛ, UV anaa antistatic ahwehwɛde ahorow.

• Akwanside a ɛhwehwɛ, OTR anaa WVTR adwumayɛ.

• Ɔha biara mu nkyem a wɔasan de adi dwuma a wɔhwehwɛ.

• Sɔhwɛ amanneɛbɔ a wɔhwehwɛ ne baabi a wɔrekɔ gua.

• Mfiase no dodow a wɔkra ne afe afe ahwehwɛde a wɔasusuw ho.

• Packing, destination port ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

Send Wo APET PETG GAG Ahwehwɛde ahorow

Adansedi nkrataa ne Sɔhwɛ Nwoma

Nwoma a ɛwɔ hɔ no betumi ayɛ mfiridwuma ho nsɛm nkrataa, ahobanbɔ ho nsɛm nkrataa, honam fam agyapadeɛ ho amanneɛbɔ, nneɛma a wɔabara ho amanneɛbɔ, aduane a wɔde di nkitaho ho mpaemuka, atutena ho amanneɛbɔ ne adansedie a ɛfa nneɛma pa ho.

Ɛsɛ sɛ wɔhwɛ krataa biara mu hwɛ sɛnea resin pɔtee, nneɛma a wɔayɛ, ne kɛse, kɔla, nneɛma a wɔasan de adi dwuma, beae a wɔyɛ ne sɛnea wɔpɛ sɛ wɔde bedi dwuma.

Ɛsɛ sɛ wɔkyerɛkyerɛ SGS mu sɛnea sɔhwɛ no kɛse te na ɛnsɛ sɛ wɔde ma sɛ amansan nyinaa nneɛma ho adansedi krataa.

HSQY Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

Nneɛma a Wɔyɛ ne Nneɛma a Wɔde Gu Mu

Wobetumi de APET, PETG ne GAG ​​nneɛma ama sɛ nhoma mmobɔwee, nkratafa anaa asinasin a wɔatwa sɛnea ne kɛse ne nsakrae kwan a wɔhwehwɛ no te.

Wobetumi de PE film ne kraft krataa abɔ nneɛma a wɔde roll no ho ban, bere a wobetumi de nneɛma a wɔde krataa ayɛ no ahyɛ nkotoku a ɛbɔ ho ban, nnaka anaasɛ wɔ nneɛma a wɔde kɔ amannɔne a ɛyɛ den so.

Ɛsɛ sɛ packing specifications kyerɛ roll mu duru, krataa-core diameter, abɔnten diameter, winding akwankyerɛ, pallet nsusuwii, krataa dodow ne pallet mu duru a ɛsen biara.

Dɛn Nti na Wopaw HSQY sɛ Wo APET PETG GAG Supplier?

• APET, PETG ne PETG/APET/PETG GAG nhyehyɛe ahorow.

• Ne kɛse fi bɛyɛ 0.15mm kosi 3mm.

• Roll trɛw fi bɛyɛ 110mm kosi 1280mm.

• Standard ne customized krataa nsusuwii.

• GAG layer ratios ne soro nhyehyɛe ahorow a wɔayɛ no sɛnea wɔpɛ.

• Nneɛma a emu da hɔ, kɔla, matte, frosted ne embossed nneɛma.

• Thermoforming, folding-box, tintim ne fabrication grades.

• Nhwɛsoɔ a wɔde yɛ, tintim, bonding ne sealing nhwehwɛmu.

• Quality inspection sɛnea wɔapene so specifications.

• Customized rolls, nkratafa, pallets ne export packaging.

Ansa na wɔbɛyɛ nneɛma pii no, HSQY kamfo kyerɛ sɛ wɔnsɔ nneɛma a wɔapaw no nhwɛ wɔ adetɔfo no ankasa thermoforming, printing, die-cutting, folding, bonding ne sealing mfiri so.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

Nsɛm a Wɔtaa Bisa Fa APET PETG ne GAG ​​Nkrataa Ho

Dɛn ne APET krataa?

APET yɛ PET krataa a ɛnyɛ nsɛso a wɔtaa de yɛ nneɛma a wɔde thermoformed a ɛda adi pefee, trays, blisters, clamshells ne folding boxes.

Dɛn ne PETG krataa?

PETG yɛ glycol-modified copolyester krataa a wɔayɛ ama thermoforming a ɛkɔ anim, toughness, printing, bonding ne fabrication.

Dɛn ne GAG ​​krataa?

GAG yɛ krataa a ɛwɔ ntoatoaso abiɛsa a wɔde coextruded a PETG akyi were ne APET core.

So APET, PETG ne GAG ​​yɛ nneɛma koro?

Dabi APET ne PETG yɛ polyester nnuru ahorow, bere a GAG yɛ nhyehyɛe a ɛwɔ ntoatoaso pii a ɛka PETG soro ne APET core bom.

Nneɛma bɛn na eye sen biara ma thermoforming?

Wɔtaa de APET di dwuma ma sikasɛm mu nneɛma a wɔde kyekyere nneɛma, wɔpɛ PETG ma deep draws ne nsɛm a ɛyɛ den, na GAG ma kari pɛ wɔ PETG soro adwumayɛ ne APET ka ntam.

Dɛn ne GAG ​​layer nhyehyɛe no?

Nkyerɛkyerɛmu a ɛyɛ gyinapɛn ne PETG/APET/PETG, a PETG wɔ akyi nyinaa na APET wɔ mfinimfini.

So wɔasiesie PETG ne APET layer ratio no?

Dabi, wobetumi ayɛ nsakrae wɔ layer ratio no mu sɛnea ne kɛse te, nea ɛyɛ bun, bonding, sealing, surface performance ne ɛka.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Nsuo a ɛwɔ hɔ no firi bɛyɛ 0.15mm kɔsi 3mm.

Nhoma mmobɔwee ntrɛwmu bɛn na ɛwɔ hɔ?

Roll trɛw fi bɛyɛ 110mm kosi 1280mm wɔ hɔ.

Nkratafa akɛse bɛn na ɛwɔ hɔ?

Nkratafa akɛseɛ a wɔahyɛ da ayɛ no bi ne 915 × 1220mm ne 1000 × 2000mm, a ne kɛseɛ a wɔahyɛ da ayɛ wɔ hɔ.

So wobetumi atintim APET PETG ne GAG?

Wobetumi de screen printed grades a ɛfata, UV offset printed, UV inkjet printed anaasɛ hot stamped wɔ adhesion ne curing sɔhwɛ ahorow akyi.

So wobetumi de GAG ​​krataa adi dwuma de ayɛ nnaka a wɔbobɔw?

Aane. Wɔtaa paw GAG ma nnaka a wɔbobɔw a ɛda adi pefee a ɛhwehwɛ sɛ wotintim, wɔkyerɛw nkyerɛwde, wɔbobɔw ne nea wɔde nkata so.

So wobetumi de ɔhyew akata GAG krataa no so?

GAG nhyehyeɛ a wɔapaw no tumi boa thermal, high-frequency anaa ultrasonic sealing, nanso ɛsɛ sɛ wɔsɔ nhyehyeɛ, nnwinnadeɛ ne dwumadie tebea hwɛ.

So PETG hwehwɛ sɛ wodi kan dry ansa na wɔayɛ no thermoforming?

Wobetumi ayɛ PETG krataa grade ahorow bi a wonni kan nwura bere a wɔde asie yiye no, nanso ɛsɛ sɛ wodi akwankyerɛ pɔtee a nea ɔde ma no ne nsu tebea no akyi.

So APET betumi ayɛ ahwehwɛ bere a wɔreyɛ thermoforming no?

Ɔhyew a ɛboro so anaasɛ ɛnteɛ betumi ama APET ayɛ crystallization, haze anaasɛ brittleness, enti ɛsɛ sɛ wɔhwɛ ɔhyew ne cycle bere so.

So PETG mu yɛ den sen APET?

PETG taa ma toughness a ɛkɔ anim ne ahoɔden a ɛko tia mpaapaemu, nanso adwumayɛ pɛpɛɛpɛ gyina grade, thickness ne sɔhwɛ kwan so.

So PETG betumi asi polycarbonate ananmu?

PETG betumi asi polycarbonate ananmu wɔ displays, covers ne thermoformed afã horow bi mu, nanso polycarbonate taa ma ɔhyew ne impact adwumayɛ a ɛkorɔn.

So PETG betumi asi acrylic ananmu?

PETG betumi ayɛ mmerɛw sɛ wɔbɛhyehyɛ na ɛnyɛ den sɛ ɛbɛpaapae sen acrylic a wɔtaa de di dwuma, bere a acrylic betumi ama ne soro ayɛ den yiye na ama abɔnten so wim tebea ayɛ den bere tenten.

So PETG ne GAG ​​nkrataa a wɔahyɛ da ayɛ no fata wɔ abɔnten?

Wɔayɛ standard grades titiriw ama dan mu dwumadie. Bere tenten a wɔde di dwuma wɔ abɔnten no hwehwɛ sɛ wɔde UV-a ɛyɛ den anaasɛ UV-bɔ ho ban.

So APET PETG ne GAG ​​aduan yɛ nea asiane biara nni ho?

Wobetumi de aduan a wɔde di nkitaho grade a wɔatu ho ama ama bere a resin, nneɛma a wɔde ka ho, nhyehyɛe ne nkrataa no fata ma gua a wɔde kɔ ne tebea horow a wɔde di dwuma no.

So saa nneɛma yi fata ma nnuru a wɔde kyekyere nneɛma?

Aduruyɛ mu nneɛma a wɔde kyekyere nneɛma hwehwɛ sɛ wonya aduruyɛ mu gyinapɛn a wɔagye atom, nneɛma a wɔyɛ a wɔahyɛ so, sɛnea wotumi hwehwɛ, sɛnea wɔde sterilization hyia, nneɛma a wɔde kyekyere nneɛma ho sɔhwɛ ne mmara kwan so nkrataa.

So APET PETG ne GAG ​​yɛ nneɛma a akwanside kɛse wom?

Standard grades nyɛ nneɛma a akwanside kɛse wom a ɛba ara kwa. Ebia nneɛma a ɛyɛ mmerɛw no behia EVOH, ACLAR, ade a wɔde kata so anaasɛ akwanside nhyehyɛe foforo.

So wobetumi aka GAG ho asɛm sɛ mono-PET krataa?

GAG kura APET ne PETG, a ne nyinaa yɛ polyesters nanso ɛsono crystallization ne recycling suban. Ɛsɛ sɛ wɔhwɛ sɛ wɔkyerɛ sɛ wɔasan de nneɛma adi dwuma bio ama ɔdan no nyinaa.

So PETG ne PET toa a wɔsan de di dwuma bio a wɔtaa de di dwuma no hyia?

Ebia PETG ne PET toa a wɔsan de di dwuma daa no nhyia efisɛ ne crystallization ne melting suban yɛ soronko wɔ container-grade PET ho.

So wobetumi de PET a wɔasan de adi dwuma adi dwuma?

Wobetumi asusuw nneɛma a wɔasan de adi dwuma a wɔpaw no ho sɛnea emu da hɔ, kɔla, efĩ, mfiri a wɔde yɛ adwuma, aduan a wɔde di nkitaho ahwehwɛde ne adetɔfo ho nsɛm te.

So wobetumi de PETG anaa GAG adi dwuma de ayɛ credit card?

Wobetumi de PETG ne GAG ​​adi dwuma sɛ layers anaa components wɔ card products mu, nanso payment cards a edi mũ hwehwɛ sɛ wɔde structure, security ne performance validation a ɛsono emu biara di dwuma.

So sini a ɛbɔ ho ban wɔ hɔ?

Wobetumi de ɔfã biako anaa ɔfã abien ahobammɔ akataso ama ama krataa a wɔapaw no kɛse ne dwumadie.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

Reference minimum order dodow no bɛyɛ 2000kg. Amanneɛbɔ nhyehyɛe, kɔla ne abasobɔde soronko betumi ahwehwɛ MOQ soronko.

So nhwɛsode ahorow wɔ hɔ?

Ebia A4 nkrataa a ɛwɔ hɔ dedaw ne nhwɛsode a wɔatwa no wɔ hɔ. Ebia GAG nhyehyɛe ahorow a wɔayɛ no sɛnea wɔpɛ no behia sɛ wɔsɔ hwɛ.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa nneɛma, nhyehyɛe, kɛse, nsusuwii, kɔla, soro, dwumadie, ɔkwan a wɔfa so yɛ, ahwehwɛdeɛ soronko, dodoɔ, packing ne destination ma.

Nya APET PETG GAG Krataa a Wɔakyerɛw

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Group de APET nkrataa, PETG nkrataa, GAG nkrataa, PET thermoforming films, PVC nkrataa, PP nkrataa ne plastic nneɛma a wɔayɛ no sɛnea wɔpɛ ma amanaman ntam B2B adetɔfo.

HSQY boa packaging converters, thermoforming nnwumakuw, folding-box manufacturers, printers, card producers, display manufacturers, importers ne distributors denam nneɛma a wɔpaw, nhwɛsode sɔhwɛ, customized production, quality inspection ne export packing.

Bisa Quote ne Nhwɛsode