PET Feuilles Composites Films APET PETG GAG

APET, PETG ani GAG sɛbɛnw filimuw ka ɲɛsin thermoforming ma

HSQY bɛ APET, PETG ani GAG sɛbɛnw filimu jɛlenw ni kulɛrilenw dilan walasa ka pakew dilan minnu dilannen don ni funteni ye, kɛsu folilenw, plastiki fɛn sɛbɛnnenw, jiralan yɔrɔw, kartiw datugulanw, lakanani datugulanw ani plastiki dilanni minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

APET, PETG ani GAG ye poliyesitɛri sɛbɛnw ye minnu bɛ tali kɛ ɲɔgɔn na, nka u kɛcogo walima u baarakɛcogo tɛ kelen ye.

APET ye PET sɛbɛn ye min tɛ fɛn ye, min bɛ sugandi tuma caman na walasa ka a foroko jɛlenw kɛ ani ka a kɛ thermoforming ye min musaka ka dɔgɔ. PETG ye kopoliyetɛri ye min sɛgɛsɛgɛra ni glycol ye, min dilannen don walasa ka a dilanni, a gɛlɛya, a dilanni ani a ka baara kɛcogo ɲɛ ka taa a fɛ.

GAG ye sɛbɛn ye min bɛ kɛ ɲɔgɔn fɛ, a bɛ kɛ ni PETG kɛnɛma fariw ye ani APET kɔnɔna. O jɔli bɛ PETG baarakɛcogo ni a sanfɛla cogoyaw fara ɲɔgɔn kan ni APET cɛmancɛ layɛrɛ dɔ ka gɛlɛya n’a musaka dɔgɔyali ye.

A janya minnu bɛ sɔrɔ, olu bɛ daminɛ milimɛtɛrɛ 0,15 ɲɔgɔn na ka se milimɛtɛrɛ 3 ma. Kurukuruw bonya bɛ daminɛ milimɛtɛrɛ 110 ɲɔgɔn na ka se milimɛtɛrɛ 1280 ma, ka sɔrɔ sɛbɛnfura hakɛ dantigɛlenw bɛ milimɛtɛrɛ 915 × 1220 ani milimɛtɛrɛ 1000 × 2000 na.

Transparent, tinted, opaque, matte, frosted, embossed, printable, food-contact, medical, UV-stabilized ani specialty grades bɛ se ka baro kɛ ka kɛɲɛ ni sigicogo wajibiyalen ye, baarakɛcogo ani komandi hakɛ fitinin.

APET, PETG ani GAG ka fɛn dilannenw minnu bɛ kɛ ka kɛɲɛ ni sariya ye, olu man kan ka ɲɛfɔ u yɛrɛma i n’a fɔ kɛnɛma UV hakɛw, u foroko minnu bɛ barika caman sɔrɔ, minnu bɛ dumuni ni ɲɔgɔn cɛ, furakɛli hakɛ walima minnu bɛ bɛn PET seginkanni sira bɛɛ ma. O nafaw bɛ fɛnw ɲɛfɔcogo tigitigi de wajibiya ani sɛgɛsɛgɛli sɛbɛnw minnu bɛ o dɛmɛ.

Sɛgɛsɛgɛli kɛ ka fara o kan HSQY PET sɛbɛnfura ka fɛn dilannenw ani PETG sɛbɛnw furakɛlicogo.

Aw ye APET PETG GAG sɔngɔko ɲini    Aw ye Materiel Samples ɲini

APET, PETG ani GAG ka filimu wideyow

Aw ye wideyo lajɛ min bɛ duguma walasa ka HSQY PET sɛbɛnfura filimuw lajɛ, rollo cogoyaw, sɛbɛnw dilanni ani thermoforming baarakɛcogo.

APET, PETG ani GAG sɛbɛnw ye mun ye?

APET ka sɛbɛn

APET kɔrɔ ye poliyetilɛni tereftalati amɔrifu ye. O ye poliyesitɛri gɛlɛn jɛlen ye min bɛ kɛ ka caya ka kɛ kurukuruw, sɔgɔsɔgɔninjɛw, sanubɔlanw, kɛsu folilenw ani foroko wɛrɛw ye minnu dilannen don ni funteni ye.

A ka c’a la, APET bɛ jɛya ɲuman di, ka gɛlɛya, ka a hakɛ sabati ani ka musaka dɔgɔya walasa ka pakew dilanni kɛ ni hakɛ caman ye.

PETG ka sɛbɛn

PETG ye kopoliyetɛri sɛbɛn ye min sɛgɛsɛgɛra ni glycol ye, min dilannen don walasa ka kristalize dɔgɔya ani ka thermoforming, impact resistance, cutting, bending, printing ani fabrication ɲɛ ka taa a fɛ.

A ka c’a la, PETG bɛ sugandi ka kɛ ja juguw ye, yɔrɔ minnu dilannen don ka ɲɛ, jiralan jɛlenw, minɛnw datugulanw, pake kɛrɛnkɛrɛnnenw ani fɛn minnu bɛ ɲini ka se ka sɔgɔ walima ka kari.

GAG ka sɛbɛn

GAG ye poliyesitɛri sɛbɛn ye min bɛ kɛ ni ɲɔgɔn ye, a bɛ kɛ ni PETG kɛnɛma fariw ye ani APET kɔnɔna.

PETG sanfɛla laminiw bɛ se ka foroko, sirili, sɛbɛnni ani sigicogo sugandilenw ɲɛ, ka sɔrɔ APET kɔnɔna bɛ se ka musaka dɔgɔya ani ka gɛlɛya di.

PETG ni APET layɛrɛ hakɛ tɛ diɲɛ bɛɛ ta ye. A ka kan ka sugandi ka kɛɲɛ ni a janya bɛɛ lajɛlen ye, a ja juguya, a siricogo, a sigicogo, a sanfɛla baarakɛcogo ani a musaka laɲini.

APET ni PETG ni GAG ka ɲɔgɔn sanga

APET PETG GAG Sɛbɛn ɲɛnamaw

Fɛn labanw ka kan ka fɛn tigitigi jira, resin hakɛ, layini jɔcogo, layini hakɛ, a janya muɲuni, a bonya, a sanfɛla, a kulɛri, a lakanani filimu ani a baaracogo laɲininen.

GAG Layɛrɛ jɔcogo ani Layɛrɛ hakɛ

Sannikɛlaw ka kan ka PETG fari janya bɛɛ lajɛlen wajibiyalenw ni PETG fari bonya hakɛ fitinin fɔ sanni u ka u jigi da GAG daɲɛba dɔrɔn kan.

PETG fari finmanw bɛ se ka kɛ sababu ye ka yɔrɔ caman sɛmɛntiya ka ɲɛ foli-kɛsu baara dɔw la, ka sɔrɔ thermoforming walima bonding kɛcogo jugumanw bɛ se ka kɛ sababu ye ka layini hakɛ wɛrɛ de wajibiya.

Termoforming (Tɛrmoforming) baarakɛcogo

APET, PETG ani GAG bɛɛ bɛ se ka kɛ thermoformed ye, nka u ka baarakɛcogo finɛtiriw ni u dilanni kɛcogo tɛ kelen ye.

Forming trials ka kan ka web sag, heating uniformity, cavity definition, wall-thickness distribution, whitening, cristallization, shrinkage ani trimming baarakɛcogo jateminɛ.

Jali ɲɛfɛla wajibiyalenw bɛ bɔ resin tigitigi la, sɛbɛnfura maracogo, a janya ani a feerela ka cikanw. Kuma bɛɛ lajɛlen min b’a jira ko kalataw bɛɛ bɛ se ka dilan k’a sɔrɔ u ma ja, o ka kan ka kɔlɔsi.

Foli, Bonding ani Sigili

PETG yɔrɔw bɛ se ka GAG ka foli, a sirili ani a sigicogo sugandilenw ɲɛ ni a bɛ tali kɛ APET yɔrɔ sariyalen na.

Baara kɛcogo lakika bɛ bɔ PETG fari bonya la, nɔrɔli, tintiri, yɔrɔ furakɛli, foli sira, jatebɔ juguya, funteni, degun ani sigi waati.

• Die tigɛcogo ni a jatebɔ ka kan ka sɛgɛsɛgɛ ni a dawolo bɛ kari ani ka a fin.

• Nɛnɛ foli ka kan ka jateminɛ walasa ka spring-back ni stress whitening sɔrɔ.

• Nɔrɔli sirili ka kan ka sɛgɛsɛgɛ walasa a jɛlen don, a barika ka bon ani a bɛ bɛn kemikali ma.

• Sigili min bɛ kɛ ni frequence caman ye, ultrasonic walima thermal sealing ka kan ka tiɲɛ a jɔcogo yɛrɛ kan.

• Yɔrɔ minnu sɛbɛnnen don, olu ka kan ka sɛgɛsɛgɛ ni enki bɛ kari, u dabɔlen kɔfɛ.

• Dumuni ni furaw foroko bɛ mago ɲɛ nɔrɔli ni u datugucogo la minnu dagalen don.

Sɛbɛnni ni finidoncogo

APET, PETG ani GAG sɛbɛnw baarakɛcogo

• Foroko minnu bɛ kɛ ni funteni ye : Kurukuruw, wuluwuluw, sanubɔlanw, fɛnw dontaw ani datugulan jɛlenw.

• Box folilenw : Kartɔn jɛlenw ye ɲɛgɛnw, ɛntɛrinɛti, kadow, tulonkɛfɛnw ani mɔgɔw ka fɛnw ye.

• Foroko sɛbɛnnenw: UV offset, ekran sɛbɛnnen ani plastiki kɛsu minnu sɛbɛnnen don nizɛrikan na.

• Dumuni foroko: Safinɛw ni minɛn minnu bɛ kɛ ni dumunifɛnw sɔrɔcogo hakɛ ye min dagalen don.

• Furakɛcogo: Sanubɔlanw, kurukuruw ani minɛnw foroko ni furakɛli jatew ye minnu sɛgɛsɛgɛra.

• Ɲɛjiraliw: POP jiralanw, feerekɛyɔrɔw, fɛn dilannenw marayɔrɔw ani panɛri jɛlenw.

• Karti yɔrɔw: Layɛrɛ sɛbɛnnenw, da datugulenw, mɔgɔ dɔnni kartiw ani doncogo-kɔlɔsili kartiw.

• Lakanali datugulanw : Minɛnw datugulanw, masinw kɔlɔsibagaw ani so jɛlenw ni u janya bɛnnen don.

• Mebɛri yɔrɔw: Masirifɛnw doncogo, fɛnw bilayɔrɔ ani jiralanw.

Dumuni ni ɲɔgɔn cɛ foroko wajibiyalenw

APET, PETG ani GAG man kan ka fɔ u yɛrɛma ko u bɛ dumuni ni ɲɔgɔn cɛ ka kɛɲɛ ni polimɛri tɔgɔ dɔrɔn ye.

Dumuni ni ɲɔgɔn cɛ bɛnnen bɛ bɔ resin tigitigi la, kopoliyesitɛri kɛcogo, faralifɛnw, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, kulɛriw, finiw, enki, nɔrɔlanw ani a dilanni kɔlɔsili.

Sannikɛlaw ka kan ka dumuni suguya, a sɔrɔcogo funteni, a sɔrɔ waati, a funteni cogoya, a maracogo ani a taayɔrɔ-sɔgɔcogo sariyaw fɔ.

Kɔnɔnafili sɛgɛsɛgɛli ni fɔli ka kan ka kɛ jɔli dafalen dafalen na sanni ka kɛ basigi resin dɔrɔn ye.

Foroko minnu bɛ kɛ ni sariya ye ani minnu ka barika ka bon

Karti ni Identifikasiyɔn Sɛbɛnw

PETG ni GAG bɛ se ka kɛ layɛrɛ sɛbɛnnenw ye, layɛrɛw, layɛrɛw kolomaw walima lamini yɔrɔw ye dantigɛlisɛbɛnw kɔnɔ, dondaw kɔlɔsili kartiw, kantigiya kartiw ani karti kɛrɛnkɛrɛnnenw fɛnw na.

Sɛbɛn man kan ka ɲɛfɔ iko karti dafalen walima wari sarali karti ni karti jɔcogo bɛɛ ma tiɲɛ.

Karti porogaramuw bɛ se ka kɛ sababu ye ka a janya ɲɛfɔlen, a dɔgɔyali, a sɛbɛnni nɔrɔli, a lamini funteni, a ɲɛkisɛ fanga, a kurulen muɲuli, a bɛ bɛn puwɛnti ma, a bɛ bɛn ni magnetic-stripe ye ani a lakanani wajibiyalenw.

So kɔnɔ ani kɛnɛma baarakɛcogo

Standard clear APET, PETG ani GAG sɛbɛnw bɛ sugandi fɔlɔ so kɔnɔ pakew dilanni, sɛbɛnni, jiralanw ani fɛn dilannenw kama.

Kɛnɛma taamasiɲɛw, datugulanw walima panɛriw minnu bɛ mɛn senna, olu bɛ UV sabatili walima UV lakanani hakɛ kɛrɛnkɛrɛnnen de wajibiya.

Sannikɛlaw ka kan ka kɛnɛma waati makɔnɔnen, waati cogoya, tile yeelen tilennen, kulɛri, jɛman dan, kɛnɛya sabatili wajibiyalen ani waati sɛgɛsɛgɛli fɛɛrɛ fɔ.

PETG fari standard minnu bɛ GAG sɛbɛn kɔnɔ, olu man kan ka jira u yɛrɛma i n’a fɔ UV-protection layɛrɛ kɛrɛnkɛrɛnnen.

Segin-ka-bɔnye ani fɛnw dɔnni

APET, PETG ani GAG man kan ka tila u yɛrɛma ka segin-ka-bɔnye ɲinini kelen kɛ.

APET thermoforms standards bɛ se ka sɔn PET lasegincogo porogaramu dɔw kɔnɔ, nka sɔnni yɛrɛ bɛ bɔ sigida ka fɛnw sɛgɛsɛgɛli, u lajɛcogo ani u baarakɛcogo la.

PETG ye kopoliyetɛri ye min tɛ fɛn ye, wa a bɛ se ka kɛ a tɛ bɛn PET buteliw lasegincogo sariyalenw ma.

GAG kɔnɔ, PETG sanfɛlanw ni APET kɔnɔna dɔ bɛ yen, o la, a bɛnkan ka kan ka jateminɛ i n’a fɔ fɛn caman jɔli dafalen.

Labɛliw, enkiw, nɔrɔlanw, finiw, kulɛriw ani fɛn minnu nɔrɔlen don, olu fana bɛ se ka nɔ bila fɛnw bɔli la ani u lasegincogo la.

Tigɛcogo ni dilancogo ɲɛfɔli

• Aw bɛ gilotini nɔgɔlenw, sɔgɔlanw, routeurs, punches walima steel-rule dies kɛ.

• Aw bɛ sɛbɛnfura dɛmɛ tigɛtuma na walasa ka dɔ bɔ a yɛrɛyɛrɛli ni a dawolo kari la.

• Aw bɛ punch clearance ni edge distance dafa ka kɛɲɛ ni a janya ye.

• Aw bɛ lakana masiki bɔ foroko yɔrɔw la minnu sumana ni a mago bɛ a la.

• Aw bɛ nɛnɛ kɔrɔtacogo kɔrɔbɔ walasa ka a fin, ka kari ani ka spring-back sɔrɔ.

• Aw bɛ nɔrɔlanw sugandi ka kɛɲɛ ni APET, PETG walima GAG sanfɛla chimie ye.

• Laser tigɛ ka kan ka kɛ dɔrɔn ni fɛn hakɛ tigitigi, minɛnw ani bɔli kɛcogo tiɲɛna.

• Aw bɛ fiɲɛbɔlan bɛnnen kɛ funteni, solda, sirili ani sɛbɛnni waati.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• Resin ni matériel-grade sɛgɛsɛgɛli.

• APET, PETG walima GAG sigicogo dafalen.

• GAG bɛɛ lajɛlen janya ni layɛrɛ-ratio sɛgɛsɛgɛli.

• A bonya ni a bonya muɲuni.

• Rollo bonya, sɛbɛnfura hakɛ ani diagonal tolerance.

• Rollo girinya, roll janya, a kɔnɔna hakɛ ani a winding cogoya.

• Flatness, curl, telescoping ani dakunw ɲɔgɔndan.

• Yeelen tali, sisi, tint ani gloss.

• Nɔgɔ nɛrɛma, jeli, bugun, jibɔyɔrɔw ani nɔgɔ.

• Tensile fanga, janya, modulus ani impact performance.

• Vicat softening ani funteni-deflection baarakɛcogo.

• Thermoforming window ni sɛbɛnfura sag.

• Ja juguya, kɔnɔna ɲɛfɔli ani kogo-janya tilali.

• Kristaliyali, a finman ani a dɔgɔyali a dabɔlen kɔfɛ.

• Printing adhesion ani furakɛli bɛnkan.

• Die tigɛ, scoring ani foli kɛcogo.

• Nɔrɔli sirili ni a sirili fanga.

• Dumuni ni ɲɔgɔn cɛ jiginni walima furakɛli-pake sɛgɛsɛgɛli yɔrɔ minnu na a mago bɛ a la.

• UV-weathering sɛgɛsɛgɛliw kɛnɛma kalataw kama.

• Pake, palɛti ani minɛnw doni sɛgɛsɛgɛli.

APET PETG GAG sɛbɛn ɲɛ sugandiliw

• A janya bɛ daminɛ milimɛtɛrɛ 0,15 ɲɔgɔn na ka se milimɛtɛrɛ 3 ma.

• Aw bɛ wuli ka bɔ milimɛtɛrɛ 110 ɲɔgɔn na ka se milimɛtɛrɛ 1280 ma.

• 915 × 1220mm ani 1000 × 2000mm standard sɛbɛnw.

• Rollo bonya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye ani sɛbɛnw tigɛlenw ka kɛɲɛ ni u bonya ye.

• APET, PETG ani PETG/APET/PETG GAG sigicogo.

• GAG PETG-fari ni APET-core hakɛw bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Kulɛri jɛlenw, tintin, translucent ani opaque.

• Surfaces glossy, matte, frosted ani embossed.

• Fɛnɲɛnɛmafagalan min bɛ kɛ fan kelen walima fan fila fɛ.

• Sɛbɛnni, foli-kɛsu ani thermoforming grades.

• Dumuni-sɔrɔ-cogo ni furakɛli-kalan hakɛw ni sɔnni kɛra.

• UV-stabilisé, antistatique ani impact-modified grades.

• Virgin, recycled-content ani customized material options ka kɛɲɛ ni tiɲɛni ye.

• Labɛnw, rollow, kartɔnw, palɛtiw ani cikan taamasiyɛnw.

Kunnafoni minnu ka kan ka kɛ walasa ka Quotation sɔrɔ

• APET, PETG walima GAG fɛnw.

• A ka kan ka kɛ a bɛɛ lajɛlen janya ni a muɲuni ye.

• GAG layɛrɛ jɔcogo ni fari hakɛ wajibiyalen.

• Kurukuru bonya walima sɛbɛnfura hakɛw.

• Rollo janya wajibiyalen, rollo girinya ani papiye kɔnɔna.

• A ɲɛ jɛlen don, a ɲɛ ye bulama ye, a bɛ yeelen bɔ walima a ɲɛ tɛ ye.

• Surface glossy, matte, frosted walima embossed.

• Protective-film wajibiyalen don.

• Thermoforming juguya, mɔbili hakɛw ani minɛnw.

• Sɛbɛnni, foli, sigili, sirili walima fɛn dilanni taabolo.

• Dumuni-ɲini, furakɛli, UV walima antistatique wajibiyalenw.

• Barika wajibiyalen, OTR walima WVTR baarakɛcogo.

• Kɛmɛsarada la, fɛn minnu bɛ segin-ka-bɔ, olu wajibiyalen don.

• Kɔrɔbɔli rapɔɔri wajibiyalenw ani taayɔrɔ suguya.

• Koman fɔlɔ hakɛ ani san ɲinini jateminɛlen.

• Packing, destination port ani delivery don wajibiyalen.

Aw ye aw ka APET PETG GAG wajibiyalenw ci

Sɛbɛnw ni Kɔrɔbɔli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛɛrɛko kunnafoniw ye, lakana kunnafoniw sɛbɛnw, farikolo-nafolo kunnafoniw, fɛn dantigɛlenw kunnafoniw, dumuni ni ɲɔgɔn cɛ jirali, mɔgɔw ka bɔnɔgɔla kunnafoniw ani jogoɲumanya seereyaw.

Sɛbɛn kelen-kelen bɛɛ ka kan ka lajɛ ni resin tigitigi ye, a kɛcogo, a janya, a kulɛri, a kɔnɔfɛnw minnu bɛ segin ka kɛ fɛn wɛrɛw ye, a dilanni yɔrɔ ani a kɛcogo laɲininen.

SGS ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli hakɛ tigitigi ye, wa a man kan ka jira iko diɲɛ bɛɛ ka fɛn dilannenw seereyali.

HSQY Duniya Ɲɛjiraliw

Sɛnɛfɛnw dilanni ni u forokoni

APET, PETG ani GAG ka fɛn dilannenw bɛ se ka dilan i n’a fɔ kurukuruw, sɛbɛnw walima tigɛlenw ka kɛɲɛ ni u janya ni u jiginni kɛcogo wajibiyalen ye.

Rolifɛnw bɛ se ka siri ni PE filimu ni kraft papier ye, ka sɔrɔ sɛbɛnfura dilannenw bɛ se ka kɛ bɔrɔw kɔnɔ minnu bɛ u tanga, kartɔnw kɔnɔ walima ka u bila jamana kɔkan palɛti gɛlɛnw kan.

Packing specifications ka kan ka rollo girinya, papier-core cɛmancɛ, kɛnɛma cɛmancɛ, winding direction, pallet hakɛw, sheet jate ani pallet girinya hakɛ danmadɔ jira.

Mun na i bɛ HSQY sugandi ka kɛ i ka APET PETG GAG feerela ye?

• APET, PETG ani PETG/APET/PETG GAG sigicogo.

• A janya bɛ daminɛ milimɛtɛrɛ 0,15 ɲɔgɔn na ka se milimɛtɛrɛ 3 ma.

• Aw bɛ wuli ka bɔ milimɛtɛrɛ 110 ɲɔgɔn na ka se milimɛtɛrɛ 1280 ma.

• Sɛbɛn hakɛ minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• GAG layɛrɛ hakɛw ni dugukolo sanfɛla jɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Fɛn jɛlenw, kulɛrilenw, matte, frosted ani embossed.

• Thermoforming, folding-box, sɛbɛnni ani fɛn dilanni hakɛw.

• Misaliw minnu bɛ kɛ ka foroko, sɛbɛnni, sirili ani sigili jateminɛ.

• Jogoɲumanya sɛgɛsɛgɛli ka kɛɲɛ ni fɛnw ye minnu dabɔra.

• Rollo, sheets, palettes ani export pakew minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Sani u ka fɛn caman dilan, HSQY b’a ɲini ka fɛn sugandilenw kɔrɔbɔ kiliyan ka thermoforming, printing, die-cutting, folding, bonding ani sealing minɛn lakikaw kan.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na APET PETG ni GAG sɛbɛnw kan

APET sɛbɛn ye mun ye?

APET ye PET sɛbɛn ye min tɛ fɛn ye, min bɛ kɛ ka caya ka kɛ pakew ye minnu dilannen don ni funteni ye, sanubɔlanw, kurukuruw, wuluwuluw ani kɛsu folilenw.

PETG sɛbɛn ye mun ye?

PETG ye kopoliyesitɛri sɛbɛn ye min sɛmɛntiyalen don ni glycol ye, min dilannen don walasa ka thermoforming, toughness, printing, bonding ani fabrication ɲɛ ka taa a fɛ.

GAG sɛbɛn ye mun ye?

GAG ye sɛbɛn ye min bɛ kɛ ɲɔgɔn fɛ, a bɛ kɛ ni PETG kɛnɛma fariw ye ani APET kɔnɔna.

Yala APET, PETG ani GAG ye fɛn kelen ye wa?

Ayi APET ni PETG ye poliyesitɛri furakisɛw ye minnu tɛ kelen ye, ka sɔrɔ GAG ye fɛn caman ye minnu bɛ PETG yɔrɔw ni APET kɔnɔna fara ɲɔgɔn kan.

Fɛn jumɛn de ka fisa ni thermoforming ye?

APET bɛ kɛ ka caya sɔrɔko pakew dilanni na, PETG ka fisa ni ja juguw ni kunnafoni gɛlɛnw ye, ani GAG bɛ balansi di PETG sanfɛla baarakɛcogo ni APET musaka cɛ.

GAG layɛrɛ jɔcogo ye mun ye?

Ɲɛfɔli sariyalen ye PETG/APET/PETG ye, PETG bɛ kɛnɛma yɔrɔ fila bɛɛ la, APET bɛ cɛmancɛ la.

Yala PETG ni APET layɛrɛ hakɛ bɛ sigi sen kan wa?

Ayi, layɛrɛ hakɛ bɛ se ka ladilan ka kɛɲɛ ni a bonya ye, a dilanni juguya, a sirili, a sirili, a sanfɛla baarakɛcogo ani a musaka.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

A janya minnu bɛ sɔrɔ, olu bɛ daminɛ milimɛtɛrɛ 0,15 ɲɔgɔn na ka se milimɛtɛrɛ 3 ma.

Rollo bonya jumɛnw bɛ sɔrɔ?

Kurukuruw bonya bɛ bɔ milimɛtɛrɛ 110 ɲɔgɔn na ka se milimɛtɛrɛ 1280 ma.

Sɛbɛn hakɛ jumɛnw bɛ sɔrɔ?

Sɛbɛn hakɛ dantigɛlenw ye 915 × 1220mm ani 1000 × 2000mm ye, ni hakɛw bɛ sɔrɔ minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Yala APET PETG ni GAG bɛ se ka sɛbɛn wa?

Karamɔgɔ bɛnnenw bɛ se ka sɛbɛn ekran kan, ka UV offset sɛbɛn, ka UV inkjet sɛbɛn walima ka taamasiyɛn kɛ ni funteni ye, nɔrɔli ni kɛnɛyali sɛgɛsɛgɛliw kɔfɛ.

Yala GAG sɛbɛn bɛ se ka kɛ ka kɛsu foli kɛ wa?

Awɔ. GAG bɛ sugandi ka caya ka ɲɛsin kɛsu dafalenw ma minnu bɛ se ka sɛbɛnni kɛ, ka jatebɔ kɛ, ka foli kɛ ani ka nɔrɔli kɛ.

Yala GAG sɛbɛn bɛ se ka datugu ni funteni ye wa?

GAG jɔcogo sugandilenw bɛ se ka dɛmɛ don ka sigicogo sumaya, ni frequence haute walima ultrasonic ye, nka a jɔcogo, a minɛnw ani a kɛcogo cogoyaw ka kan ka kɔrɔbɔ.

Yala PETG bɛ a ɲini ka jalen kɛ ka kɔn sani a ka kɛ thermoforming ye wa?

PETG sɛbɛnfura dɔw bɛ se ka dilan k’a sɔrɔ u ma ja ka kɔn ni u maralen don ka ɲɛ, nka u ka kan ka tugu furakɛlikɛlaw ka cikan tigitigiw ni ji cogoya la.

Yala APET bɛ se ka kɛ kristali ye thermoforming waati la wa?

Ni funteni caya kojugu walima ni a ma kɛ kelen ye, o bɛ se ka kɛ sababu ye ka APET kɛ kristali ye, ka kɛ sisi ye walima ka a kari, o la, funteni ni a cycle waati ka kan ka kɔlɔsi.

Yala PETG barika ka bon ka tɛmɛ APET kan wa?

A ka c’a la, PETG bɛ gɛlɛya fisaman di ani ka se ka kari, nka a kɛcogo tigitigi bɛ bɔ a hakɛ, a bonya ani a sɛgɛsɛgɛli kɛcogo la.

Yala PETG bɛ se ka kɛ polikarbonati nɔ na wa?

PETG bɛ se ka polikarbonati bila a nɔ na jiralan dɔw la, datugulan dɔw la ani yɔrɔ minnu dilannen don ni funteni ye, nka a ka c’a la, polikarbonati bɛ funteni ni nɔ bilali baarakɛcogo caman di.

Yala PETG bɛ se ka kɛ akiriliki nɔ na wa?

PETG bɛ se ka nɔgɔya ani ka sɔgɔsɔgɔ kosɛbɛ ka tɛmɛ akiriliki sariyalen kan, ka sɔrɔ akiriliki bɛ se ka kɛ sababu ye ka yɔrɔ gɛlɛya ka ɲɛ ani ka kɛnɛma waati jan kɛ.

Yala PETG ni GAG sɛbɛnw bɛnnen don kɛnɛma wa?

Standard grades dabɔra kosɛbɛ so kɔnɔ baarakɛcogo la. Kɛnɛma baara kuntaalajan bɛ a ɲini ka kɛ ni UV-stabilized walima UV-protected grade ye.

Yala APET PETG ni GAG dumuniw farati tɛ wa?

Dumunifɛnw ni ɲɔgɔn cɛ hakɛ kɛrɛnkɛrɛnnen bɛ se ka di ni resin, faralifɛnw, a jɔcogo ani sɛbɛnw bɛnnen don yɔrɔ sugu la ani baarakɛcogo cogoyaw ma.

Yala o fɛnw bɛnnen don furakɛli foroko kɔnɔ wa?

Furakɛcogo pakew bɛ furakɛli hakɛ sɛgɛsɛgɛlen de wajibiya, u dilanni kɔlɔsili, u nɔfɛtaama, u ka sterilize bɛnkan, pakew ni u dafalen sɛgɛsɛgɛli ani sariyaw sɛbɛnw.

Yala APET PETG ni GAG ye fɛnw ye minnu bɛ se ka bali kosɛbɛ wa?

Standard grades tɛ fɛnw ye minnu bɛ barika caman sɔrɔ u yɛrɛma. Fɛn minnu bɛ se ka kɛ, olu bɛ se ka kɛ EVOH, ACLAR, finimugu walima barikalan wɛrɛ ye.

Yala GAG bɛ se ka ɲɛfɔ iko PET sɛbɛn kelen wa?

APET ni PETG bɛ GAG kɔnɔ, olu fila bɛɛ ye poliyesitɛriw ye nka u ka kristalizecogo ni u lasegincogo tɛ kelen ye. Segin-ka-bɔnye fɔlenw ka kan ka sɛgɛsɛgɛ walasa ka ɲɛsin jɔli dafalen ma.

Yala PETG bɛ bɛn PET buteliw lasegincogo sariyalen ma wa?

PETG bɛ se ka kɛ a tɛ bɛn PET buteliw lasegincogo sariyalen ma bawo a ka kristali ni a wulicogo tɛ kelen ye ni PET ye min bɛ kɛ minɛn kɔnɔ.

Yala PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ wa?

Sugandili minnu bɛ kɛ ni fɛnw ye minnu bɛ segin ka kɛ fɛn wɛrɛw ye, olu bɛ se ka jateminɛ ka kɛɲɛ ni u jɛlen ye, ka kɛɲɛ ni u kulɛri ye, ka kɛɲɛ ni u nɔgɔli ye, ka kɛɲɛ ni masinw ka baarakɛcogo ye, ka kɛɲɛ ni dumuniko wajibiyalenw ye ani ka kɛɲɛ ni kiliyanw ka fɛnw ye.

Yala PETG walima GAG bɛ se ka kɛ kartiw ye wa?

PETG ni GAG bɛ se ka kɛ layɛrɛw walima yɔrɔw ye kartiw kɔnɔ, nka wari sarali karti dafalenw bɛ u jɔcogo, lakanani ani baarakɛcogo tiɲɛni danfaralenw de wajibiya.

Yala filimu min bɛ mɔgɔ tanga, o bɛ sɔrɔ wa?

Fara kelen walima fan fila lakanani masiki bɛ se ka di sɛbɛnw janya ni u kɛcogo sugandilenw na.

Koman hakɛ fitinin ye mun ye?

Reference minimum order hakɛ bɛ 2000kg ɲɔgɔn bɔ. Ladamuni sigicogo, kulɛriw ani kalasi kɛrɛnkɛrɛnnenw bɛ se ka MOQ wɛrɛ wajibiya.

Yala misaliw bɛ sɔrɔ wa?

A4 sɛbɛnw ni tigɛlenw bɛ se ka sɔrɔ minnu bɛ yen. GAG jɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye, olu bɛ se ka kɛ sababu ye ka kɔrɔbɔli kɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ fɛn dilannenw, u jɔcogo, u bonya, u bonya, u kulɛri, u ɲɛda, u kɛcogo, u dilanni taabolo, u mago kɛrɛnkɛrɛnnenw, u hakɛ, u pakew ani u taayɔrɔ di.

Aw ye APET PETG GAG sɛbɛnfura Quote sɔrɔ

HSQY Plastic Group ko la

HSQY Plastic Group bɛ APET sɛbɛnw, PETG sɛbɛnw, GAG sɛbɛnw, PET thermoforming filimuw, PVC sɛbɛnw, PP sɛbɛnw ani plastiki fɛnw di diɲɛ kɔnɔ B2B kuntigiw ma.

HSQY bɛ dɛmɛ don pakew tigɛbagaw ma, thermoforming sosiyetew, foli-kɛsu dilannikɛlaw, sɛbɛnnikɛlaw, karti dilannikɛlaw, jiralan dilannikɛlaw, fɛnw donbagaw ani u tilabagaw ni fɛnw sugandili ye, misali sɛgɛsɛgɛli, u dilanni kɛcogo la, jogoɲini sɛgɛsɛgɛli ani fɛnw bɔli jamana wɛrɛw la.

Quote ni Sample ɲini