Atikewɔwɔ ƒe Dzeside Rigid PVC Blister Film

Atikewɔwɔ ƒe Dzeside Rigid PVC Blister Film

HSQY atike sesẽ PVC film nye thermoformable wɔwɔ web si wowɔ na blister packaging le tablets, capsules, atikekuiwo kple bubu li ke solid-dose atikewɔnuwo. Film la naa dzedzeme si me kɔ, sesẽ si dzi wokpɔna, wɔwɔme ƒe dɔwɔwɔ si mewɔa tɔtrɔ o eye wòsɔna kple aluminum push-through lidding foil si sɔ.

HSQY naa atike sesẽ PVC film le titrime tso 0.15mm va ɖo 0.5mm, kekeme va ɖo 1000mm kple agbalẽ xatsaxatsa ƒe didime va ɖo 600mm. Nusiwo bɔ ƒe nufiame kekemewo dometɔ aɖewoe nye 130mm kple 250mm, esime slit kekeme, titrime, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe nɔnɔme kple packing ate ŋu atrɔ asi le eŋu le blister mɔ̃a kple nubabla ƒe nɔnɔme si dzi woda asi ɖo nu.

Nukae Nye Atikewɔwɔ ƒe Rigid PVC Blister Film?

Atikewɔwɔ ƒe PVC film sesẽ nye dzoxɔxɔ ƒe aŋe si wometsɔ aŋɔ wɔe o si wozãna abe do si wɔa do ene le atike ƒe ʋuʋudedi ƒe agba geɖe siwo wotsɔ dzoxɔxɔ wɔ me. Le nu babla me la, wodoa dzo na PVC-mɔ̃a, wowɔa wo wòzua dowo, wotsɔa agbɔsɔsɔme si woatsɔ axee la yɔa wo me eye wotrenɛ ɖe nutsyɔnu si sɔ nu.

PVC si me kɔ nana be atikekuiwo kple atikekuiwo nɔa dzedzem hena ŋkuléle ɖe wo ŋu kple wo ɖeɖefia. Woate ŋu ato atike ƒe dzesi siwo le amadede me alo esiwo me mekɔ o hã vɛ ne ehiã be woade dzesi wo, ade dzesi wo alo akpɔ wo ta le kekeli me, le atikeawo ƒe liƒo kple sewo ƒe dodokpɔ nu.

PVC si sesẽ gbadzaa naa dzoxɔxɔ ƒe dɔwɔwɔ si me ga menɔa anyi o eye wòkpɔa nutome takpɔkpɔ veviwo, gake mele be woatiae le eɖokui si na atike siwo te ŋu xɔa tsi nyuie alo esiwo te ŋu xɔa ɔksidzin o. Ele be woatu atikewo ƒe agbalẽvi tiatia ɖe atikewo ƒe liƒo, taɖodzinu ƒe agbenɔƒe, mama ƒe yame ƒe nɔnɔme kple ʋuʋudedi ƒe wɔwɔme bliboa dzi.

Rigid PVC Atikewɔwɔ Film Nɔnɔmetatawo

Atikewɔwɔ Rigid PVC Film ƒe Nɔnɔmewo

Ele be woatsɔ agbalẽ xatsaxatsa ƒe didimewo asɔ kple blister mɔ̃a, awɔ dɔwɔnuwo, unwind system kple ewɔwɔ ƒe duƒuƒu. Ele be woada asi ɖe nɔnɔme mamlɛawo dzi to fli dodokpɔwo kple atikewo ƒe bablawo ƒe dzeside hafi woawɔ wo le asitsatsa me.

Nudidi Veviwo na Atikewɔwɔ ƒe PVC Blister Film

Titrime si nɔa anyi ɖaa

Gauge ƒe ɖekawɔwɔ kpena ɖe ame ŋu doa alɔ do ɖeka ƒe wɔwɔme, web ƒe dɔwɔwɔ si li ke kple nutrenu ƒe nɔnɔme siwo woate ŋu agbugbɔ awɔ. Ele be atikeƒlelawo naɖe atike ƒe titrime kple mɔɖeɖe ɖe nu ŋu ƒe nudidiwo gɔme abe atikewɔmɔnu si dzi woda asi ɖo ƒe akpa aɖe ene.

Thermoforming si ŋu kakaɖedzi le

Ele be PVC film la nawɔ do siwo mewɔa tɔtrɔ o evɔ womawɔ ƒuƒuie fũu akpa, woatɔtɔ alo web ƒe malike o. Nuwɔwɔ ƒe nuwɔna nɔ te ɖe film ƒe grade, gauge, cavity geometry, dzoxɔxɔnamɔ̃ ƒe nɔnɔme, fli ƒe duƒuƒu kple wɔwɔ ƒe nyaƒoɖeamenu dzi.

Dzadzɛ Anyigba kple Nukpɔkpɔ ƒe Nyonyome

Ele be atikewo ƒe PVC si me kɔ nakpɔ nukpɔkpɔ ƒe nyonyome dzi kple gel, kristalo teƒewo, teƒe yibɔwo, ʋuʋudedi, kuɖɔ, sisi ƒe fliwo kple nɔnɔme madeamedzi bubu siwo ate ŋu akpɔ ŋusẽ ɖe dzedzeme alo mɔ̃a ƒe dɔwɔwɔ dzi suetɔ kekeake hafi.

Lay-Flat kple Controlled Winding

Gbadzadza si dzi wokpɔna, ʋuʋudedi ƒe tete, agbalẽ xatsaxatsa ƒe gowo kple anyigba ƒe ʋuʋu kpena ɖe web si le wɔwɔm la ŋu wòƒua du ɣesiaɣi to blister packaging machine la me.

Batch ƒe Traceability

Ele be atikewo ƒe babla ƒlelawo naɖe nudidi siwo hiã na lot ƒe dzeside, agbalẽ xatsaxatsa ƒe dzesidewo, ŋkuléleɖenuŋu ŋuti nuŋlɔɖiwo, ɖaseɖigbalẽ ƒe nuŋlɔɖiwo kple tɔtrɔwo dzi kpɔkpɔ le atikewo ƒe nɔnɔme si dzi woda asi ɖo me.

Atikewo ƒe Blister Packaging Dɔwɔwɔ

Le atikewo ƒe ʋuʋudedi ƒe ɖoɖo si wozãna ɖaa si wotsɔ dzoxɔxɔ wɔe me la, woɖea PVC wɔwɔ ƒe web sesẽa eye wodoa dzoe wòdea dzoxɔxɔ si dzi wokpɔna le wɔwɔme me. Wowɔa web si wodo dzoe la wòzua dowo to yaƒoƒo, nyaƒoɖeamenu alo mɔ̃ ƒe kpekpeɖeŋu zazã me le nusiwo wotsɔ blaa nuawoe nu.

Emegbe wotsɔa atikekui alo atikekuiwo dea doawo me. Wotsɔa aluminum-nutsyɔnu si sɔ la dana ɖe web si wowɔ la dzi eye wotsɔa dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si dzi wokpɔna tsɔ xea nu. Emegbe woŋlɔa kɔda na ʋuʋudedi si wowɔ vɔ la, doa do ɖe eme, lãnɛ heléa ŋku ɖe eŋu le alesi woblae nu.

Ele be woada agbalẽvi si wotsɔ wɔa nu, nutsyɔnu ƒe agbalẽ, dzoxɔxɔ-nutrenu, do ƒe nɔnɔme kple mɔ̃ ƒe ɖoɖowo kpɔ abe nubablɛ ƒe ɖoɖo ɖeka ene tsɔ wu be woanye nusiwo le wo ɖokui si.

Plain PVC vs High-mɔxenu Atikewɔwɔ Blister Films

Wozãa PVC sesẽ gbadzaa geɖe na atikewo ƒe ʋuʋudedi siwo wozãna ɖaa, gake enaa tsi ƒe mɔxenu si bɔbɔ wu xɔ siwo ŋu wofa nu ɖo alo esiwo wotsɔ lãgbalẽ wɔe siwo ƒe mɔxenu lolo wu. Ele be woatia nusi sɔ tso adzɔnuwo ƒe liƒo ŋuti nyatakakawo me tsɔ wu be woatia gazazã alo nuwɔwɔ ƒe dɔwɔwɔ ɖeɖeko.

HSQY ƒe tɔwo            atike PVC babla nu ƒe hatsotso        lɔ PVC sesẽ kple esiwo do ƒome kplii laminated alo coated xɔtuɖoɖowo na vovovowo blister babla nudidiwo.

Alesi Nàtia PVC Film ƒe Titrime na Blister Packaging

Ele be woatia film ƒe titrime le do ƒe nɔnɔme, agbɔsɔsɔme-nɔnɔme ƒe didime, web kekeme, sesẽ si hiã, wɔwɔ ƒe goglome kple blister mɔ̃ ƒe nɔnɔmewo nu. Do si goglo wu alo esi sesẽ wu ate ŋu ana teƒea ƒe ʋuʋu geɖe wu le dzoxɔxɔ ƒe wɔwɔme me.

Trɔ asi le agbalẽ xatsaxatsa ƒe nɔnɔmewo ŋu na Blister Packaging Lines

Ele be atikewo ƒe blister-film ƒlelawo nagblɔ nusi wu kekeme kple titrime ko. Roll ƒe ɖoɖowɔwɔ kpɔa ŋusẽ ɖe unwind ƒe liƒo, tɔtrɔ ƒe ɣeyiɣi kple mɔ̃a ƒe dɔwɔwɔ dzi tẽ.

• Film ƒe titrime kple mɔɖeɖe ɖe nu ŋu.

• Slit kekeme kple kekeme ƒe mɔɖeɖe ɖe nu ŋu.

• Core eme didime kple core nu.

• Maximum agbalẽ xatsaxatsa gota didime.

• Agbalẽxatsaxatsa ƒe kpekpeme si sɔ gbɔ wu si dzi mɔ̃a da asi ɖo.

• Mɔfiame si le tsatsam.

• Anyigba ƒe ʋuʋu alo mɔxexe ƒe nudidi.

• Ƒunukpeƒewo alo ƒunukpeƒewo ƒe xexlẽme si ŋu woɖe mɔ ɖo wu.

• Roll label kple batch-traceability ƒe nudidiwo.

• Ametakpɔnu babla kple pallet ƒe nɔnɔme.

Aluminium Lidding Foil ƒe Nusiwo Sɔ Kple Wo Nɔewo

Zi geɖe la, wotrea PVC sesẽ nu ɖe ​​atikewɔnuwo ƒe aluminum-tu-to-gbadzɛ si wotsɔ dzoxɔxɔ-nutrenu ƒe aŋɔ si sɔ kple PVC tsyɔ la ŋu. Nutrenu si ŋu kakaɖedzi le nɔ te ɖe film wɔwɔ, aŋɔ, nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi kple nutrenu-dɔwɔnu ƒe nɔnɔme ƒe ƒuƒoƒo bliboe dzi.

Hafi woada asi ɖe edzi le asitsatsa me la, ele be tɔtrɔla la nada asi ɖe nutrenu ƒe ŋusẽ, dzedzeme, tsi si le dodom ƒe dɔwɔwɔ kple nubablɛ ƒe blibonyenye dzi le ewɔwɔ kple eƒe liƒo ƒe nɔnɔme siwo wogblɔ me.

Atikewɔwɔ ƒe Rigid PVC Film ƒe dɔwɔwɔ

Wozãa PVC sesẽ gbadzaa koŋ abe atikewɔmɔ̃ si wotsɔna wɔa atike sesẽ siwo ƒe agbɔsɔsɔme li ke vie le afisiwo wòhiã be woawɔ nu le gaglãgbe, woawɔ dɔ le wo ŋu le ganyawo gome eye woawɔ dɔ le dzoxɔxɔ me le mɔ si sɔ nu.

Tablet Blister Packaging: Blister ƒe do siwo me kɔ alo esiwo le amadede me na tablet ƒe nɔnɔme goglo, oval kple bubuwo.

Capsule Blister Packaging: Do siwo wotsɔ dzoxɔxɔ wɔe na capsule sesẽwo kple capsule-nu bubu siwo dze.

Atikekui Kple Nunyiame ƒe Nubablɛwo: Lãmesẽnyawo gbɔ kpɔkpɔ kple nunyiametike siwo ƒe agbɔsɔsɔme sesẽ tiatia le nusiwo wotsɔ wɔe kple woƒe liƒo me dzodzro vɔ megbe.

Lãwo ƒe Atikewo ƒe Babla: Lãwo ƒe atikekui kple atikekui tiatia siwo me ʋuʋudedi ƒe wɔwɔme si dzi woda asi ɖo la ɖo atikeawo ƒe nudidiwo gbɔ.

Tsi-dose, suppository kple mɔxenu gã zazã ate ŋu abia be woawɔ xɔtuɖoɖo tɔxɛ siwo wotsɔ laminated alo coated tsɔ wu standard mono rigid PVC.

Atikewo ƒe Nyonyome Kple Nuŋlɔɖiwo ƒe Nudidiwo

Atikewo ƒe nubablɛ gbãtɔwo bia be woaxɔ dzeside si ku ɖe nusiwo wotsɔ wɔe ŋu koŋ. Mele be woabu dɔwɔƒea ƒe ɖaseɖigbalẽwo alo ame etɔ̃lia ƒe ŋkuléleɖenuŋu ŋuti nyatakakawo be wonye kpeɖodzi si sɔ be woda asi ɖe PVC ƒe dzesi aɖe koŋ dzi na atike ɖesiaɖe alo asi ɖesiaɖe o.

Ele be nuƒlelawo naɖo kpe nuŋlɔɖi siwo hiã na nusiwo wotsɔ wɔe ƒe hatsotso si tututu, afisi wowɔe le kple asi si me woayi la dzi. Le dzedze ƒe ɖoɖoa nu la, agbalẽvi si wobia la ate ŋu anye:

• Adzɔnuwo ŋuti nyatakaka si dzi woda asi ɖo.

• Kukuɖenuŋu ƒe Ðaseɖigbalẽ alo Sewɔtakpekpe ƒe Ðaseɖigbalẽ le afisi wòsɔ le.

• Batch kple roll traceability.

• Nyatakaka siwo ku ɖe nu xoxowo kple nusiwo ŋu woxe mɔ ɖo ŋu.

• Atikewo ƒe babla siwo sɔ alo atikewo ŋuti nuŋlɔɖi siwo sɔ le afisiwo wole.

• Dzɔdzɔmeŋutete-dzikpɔkpɔ ŋuti nuŋlɔɖi siwo ƒo nu tso nuto si me wowɔa nu le si ŋu nya ku ɖo ŋu.

• Tɔtrɔwo dzi kpɔkpɔ kple nyatakaka nana ƒe nudidiwo.

• Nyatakakawo dzadzraɖo, woƒe agbenɔƒe kple wo gbugbɔdo kpɔ le afisi wòsɔ le.

Nusiwo Wozãna Le Dzesidede Dɔwɔnawo Me

Atikewɔwɔ ƒe PVC Film ƒe Dzadzraɖo Kple Eŋudɔwɔwɔ

Na atikewo ƒe PVC agbalẽ xatsaxatsawo nanɔ woƒe ametakpɔnu gbãtɔwo me le nudzraɖoƒe si le dzadzɛ, si ƒu eye ya le eme, si didi tso ɣe ƒe keklẽ tẽ, dzoxɔxɔ si gbɔ eme, ke kple ɖiƒoƒo gbɔ.

Ne woɖe agbalẽ xatsaxatsawo tso nudzraɖoƒe si fa miamiamia yi teƒe si wowɔa nu le si me dzoxɔxɔ le wu la, na ɣeyiɣi si sɔ na wo ɖɔɖɔɖo hafi nàʋu ametakpɔnuawo be wòaɖe afɔku si le film la ƒe tsidzadza me dzi akpɔtɔ.

Ele be nudzraɖoƒe ƒe ɣeyiɣi, dodokpɔ ake ƒe nudidiwo kple nutome ƒe seɖoƒe ɖesiaɖe nazɔ ɖe adzɔnu ƒe nɔnɔme si dzi woda asi ɖo si wona na grade tututu dzi.

Nyatakaka Siwo Hiã Na Atikewɔwɔ ƒe PVC Film Quote

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Slit roll kekeme kple mɔɖeɖe ɖe nu ŋu.

• Core ememe didime.

• Agbalẽxatsaxatsa ƒe didime alo agbalẽ xatsaxatsa ƒe kpekpeme si sɔ gbɔ wu.

• Amadede si me kɔ, tinted alo opaque ƒe nudidi.

• Blister mɔ̃ wɔla kple eƒe kpɔɖeŋu le afisi wòle.

• Do ƒe didime alo blister ƒe nɔnɔmetata.

• Tablet, capsule alo agbɔsɔsɔme-nɔnɔme ƒomevi bubu.

• Wobia be woatsɔ nutsyɔnu kple nutrenu ƒe ɖoɖo.

• Asi si woɖo taɖodzinu na kple atikewo ŋuti nuŋlɔɖiwo ƒe nudidiwo.

• Agbɔsɔsɔ gbãtɔ kple ƒe sia ƒe ƒe agbɔsɔsɔme si wobu.

• Packing nudidi kple yiyi melidzeƒe.

Ðaseɖigbalẽwo Kple Kpekpeɖeŋugbalẽwo

Wolé ɖaseɖigbalẽ ƒe nɔnɔmetata si le ete la ɖe asi tso adzɔnu gbãtɔ ƒe axa dzi. Ele be nuƒlelawo nabia agbalẽ siwo li fifia, siwo ku ɖe nusiwo wozãna koŋ ŋu hena atikewɔƒe ƒe PVC ƒe hatsotso kple afisi wowɔe le tsɔ wu be woaɖo ŋu ɖe ɖaseɖigbalẽ ƒe nɔnɔmetata si wozãna le mɔ gbadza nu ko ŋu.

Ne wò dzedze ƒe ɖoɖoa bia be nàŋlɔ atikewo ŋuti nuŋlɔɖi tɔxɛwo tso atikewo ŋuti nuŋlɔɖi, ɖoɖowɔwɔ, DMF, nyonyome ƒe ɖoɖo alo atike siwo ŋu seɖoƒe le ŋu la, ke tsɔ nuŋlɔɖi siwo hiã ƒe xexlẽdzesiwo na hafi nàda asi ɖe kpɔɖeŋu dzi alo nàbia nu le asitsatsa me.

HSQY Plastic Group Xexeame Katã ƒe Nukpɔkpɔwo

HSQY Plastic Group doa go atikewo ƒe bablawo trɔlawo, mamalawo kple dɔwɔƒewo ƒe nuƒlelawo le dukɔwo dome ɖeɖefiawo me be woadzro nuwo ƒe wɔwɔme, blister-machine ƒe nɔnɔmewo, dodokpɔ ƒe agbalẽ xatsaxatsawo, nyonyome ƒe nudidiwo kple ɣeyiɣi didi ƒe nuzazãwo ƒe ɖoɖowo me.

Nya Siwo Wobiaa Enuenu Tso Atikewɔwɔ ƒe PVC Film Ŋu

Nukae nye atikewɔmɔnu sesẽ PVC film?

Atikewɔwɔ ƒe PVC film sesẽ nye dzoxɔxɔ ƒe wɔwɔme web si wozãna tsɔ wɔa dowo le blister packs me na tablets, capsules kple nu bubu siwo dze le solid-dose nu.

PVC film ƒe titrime kae wozãna na atikewo ƒe ʋuʋudedi?

HSQY ƒe adzɔnuwo ƒe xexlẽdzesi sia xɔ 0.15mm va ɖo 0.5mm. Gauge nyuitɔ nɔ te ɖe do ƒe goglome, agbɔsɔsɔme-nɔnɔme ƒe didime, blister tooling kple ewɔwɔ ƒe nɔnɔmewo dzi.

Ðe wozãa PVC micron 250 zi geɖe tsɔ blaa ʋuʋudediwoa?

Anɔ abe micron 250 ene nye nusi wozãna tsɔ dzidzea atikewo ƒe PVC sesẽ, gake mele be woatiae le eɖokui si o. Ele be gauge si dzi woda asi ɖo la nasɔ kple cavity geometry, blister machine kple atike-babla ƒe kpeɖodzi.

Vovototo kae le PVC kple PVC/PVDC blister film dome?

PVC gbadzaa naa gɔmeɖoanyi si le wɔwɔm kple mɔxenu vevitɔ. PVC/PVDC tsɔa PVDC mɔxenu si naa tsi kple oxygen te ŋu nɔa te ɖe enu geɖe wu kpena ɖe eŋu, si wɔnɛ be wòsɔna na atike siwo sea veve wu.

Ðe PVC gbadzaa sɔ na atike ɖesiaɖea?

Ao, zi geɖe la, wotiaa PVC gbadzaa na atike siwo li ke vie eye wohiã mɔxenu si sɔ. Atike siwo sea tsidzadza, oxygen-sesẽ alo kekeli ate ŋu ahiã be woatsɔ mɔxenu si lolo wu alo kekeli takpɔnu babla wo le woƒe liƒo me dzodzro vɔ megbe.

Ðe HSQY ate ŋu atrɔ asi le PVC film ƒe kekeme ŋua?

Ɛ̃. HSQY ate ŋu adzro slit kekeme siwo wowɔ ɖe ɖoɖo nu vaseɖe web kekeme gãtɔ si woŋlɔ ɖi si nye 1000mm. Na blister mɔ̃a, dɔwɔnu ƒe kekeme kple mɔɖeɖe si hiã ne èle biabiam be woaxe fe ɖe eta.

Nukae nye agbalẽ xatsaxatsa ƒe didime si sɔ gbɔ wu?

Fifia ƒe adzɔnuwo ŋuti nyatakaka yɔ agbalẽ xatsaxatsa ƒe didime si sɔ gbɔ wu si ade 600mm. Ele be woatsɔ agbalẽ xatsaxatsa mamlɛtɔ ƒe didime kple agbalẽ xatsaxatsa ƒe kpekpeme nasɔ kple asisi la ƒe ʋuʋu ƒe ɖoɖoa.

Ðe PVC film sesẽ ate ŋu atre aluminum blister foil nua?

Ẽ, ne aluminum-nutsyɔnu ƒe agbalẽvi zã dzoxɔxɔ-nutrenu lacquer si sɔ kple PVC eye nutrenu ƒe dzoxɔxɔ la, woɖo kpe nyaƒoɖeamenu kple ɣeyiɣi si wònɔa anyi dzi nyuie.

Ðe woate ŋu ade ama atikewo ƒe PVC filma?

Woate ŋu adzro amadede alo dzesi siwo me mekɔ o me hena dzesidede, dzedzeme alo kekeli takpɔkpɔ ƒe nudidi tiatia aɖewo. Ele be woato atike si wowɔ la me eye woadze na atikewɔmɔnu si woɖo be woazã.

Ðe PVC sesẽ sɔ na tsi alo atike si wotsɔ blaa nu mea?

Mele be woagblɔ standard mono rigid PVC le eɖokui si na dɔ siawo wɔwɔ o. Zi geɖe la, tsi-agbɔsɔsɔme kple atikekui ƒe bablawo bia be woawɔ xɔtunu tɔxɛ siwo wotsɔ lãgbalẽ wɔe siwo wotia na nutrenu, atikewo ƒe ɖekawɔwɔ, asitɔtrɔ le nɔnɔmewo ŋu kple nɔnɔme siwo me woakɔe ɖo.

Nuŋlɔɖi kawoe wòle be mabia hena atikewɔ PVC film?

Nuŋlɔɖiwo wɔwɔ nɔ te ɖe asi si woɖo taɖodzinu na kple dzedze ƒe ɖoɖo dzi. Ele be nuƒlelawo nabia agbalẽ siwo ƒo nu tso atikeawo ƒe hatsotso kple teƒe si wowɔ wo le tututu ŋu, siwo dometɔ aɖewoe nye atikeawo ƒe nɔnɔme si dzi woda asi ɖo, agbalẽ siwo woŋlɔ ɖe hatsotsowo me kple atikewo alo sewo ŋuti kpeɖodzigbalẽ siwo sɔ.

Ðe mate ŋu axɔ kpɔɖeŋuwo hena blister machine dodokpɔa?

Woate ŋu aɖo kpe kpɔɖeŋu ƒe anyinɔnɔ dzi le eƒe titrime kple kekeme nu. Dodokpɔ ƒe agbalẽ xatsaxatsa nyo wu ne wole web-dɔwɔwɔ, ewɔwɔ, yɔyɔ kple nutrenu le asitsaƒe ƒe ʋuʋudedi ƒe ka dzi dzrom.

Nyatakaka kawoe hiã na nyayɔyɔ?

Taflatse na titrime, slit kekeme, nu vevi ƒe lolome, agbalẽ xatsaxatsa ƒe didime alo agbalẽ xatsaxatsa ƒe kpekpeme, agbɔsɔsɔme ƒe nɔnɔme, blister mɔ̃, do ƒe didime, amadede, ƒe sia ƒe ƒe didi, sedziwɔwɔ ƒe asi, nuŋlɔɖi ƒe nudidiwo, packing mɔnu kple yiyi melidzeƒe.

Nukatae Nàƒle Atikewɔwɔ ƒe PVC Film tso HSQY gbɔ?

HSQY naa PVC film sesẽ kple atike siwo do ƒome kplii ƒe blister packaging materials na atikewɔlawo, atikewo ƒe babla trɔlawo kple mamalawo. Asitsalawo ate ŋu adzro dzidzenu si wowɔ ɖe ɖoɖo nu, slit kekeme, agbalẽ xatsaxatsa ƒe didime, amadede, packing kple dodokpɔ nu le woƒe blister fliwo nu.

Ðo HSQY wò blister mɔ̃ ƒe kpɔɖeŋu, do ƒe nɔnɔmetata, agbɔsɔsɔme-nɔnɔme seselelãme, taɖodzinu asi kple ƒe sia ƒe nuƒle agbɔsɔsɔme. Míaƒe ƒuƒoƒoa ate ŋu ada asɔ nenye be ele be woabu PVC gbadzaa alo mɔxenu si kɔkɔ wu ƒe ʋuʋudedi ƒe xɔtuɖoɖo ŋu na dɔa.