Nnuruyɛ Grade Rigid PVC Blister Film

Nnuruyɛ Grade Rigid PVC Blister Film

HSQY nnuru a ɛyɛ den PVC film yɛ thermoformable forming web a wɔayɛ ama blister packaging a tablets, capsules, pills ne afoforo stable solid-dose nnuruyɛ nneɛma. Sini no ma ɛda adi pefee, rigidity a wɔahyɛ so, adwumayɛ a ɛkɔ so daa na ɛne aluminium push-through lidding foil a ɛfata hyia.

HSQY de nnuru a ɛyɛ den PVC film a ne kɛse fi 0.15mm kosi 0.5mm, ne tɛtrɛtɛ kodu 1000mm ne roll diameters a ɛkɔ 600mm ma. Common reference widths no bi ne 130mm ne 250mm, bere a slit trɛw, thickness, roll diameter, core specification ne packing betumi ayɛ customized sɛnea blister afiri ne packaging nkyerɛkyerɛmu a wɔapene so.

Dɛn Ne Nnuruyɛ mu Rigid PVC Blister Film?

Pharmaceutical rigid PVC film yɛ thermoplastic a ɛnyɛ plasticized thermoplastic forming film a wɔde di dwuma sɛ cavity-forming web wɔ thermoformed nnuru blister packs pii mu. Bere a wɔrekyekyere no, wɔma PVC ntaban no yɛ hyew, wɔyɛ no abura, de dodow kratasin no hyɛ mu ma na wɔde kata ade a ɛne no hyia so.

PVC a emu da hɔ ma tablets ne capsules kɔ so da adi ma wɔhwɛ na wɔde kyerɛ. Wobetumi nso ayɛ nnuru a wɔde kɔla ayɛ anaasɛ ɛnyɛ nea ɛda adi pefee bere a ɛho hia sɛ wɔkyerɛ, wɔde ahyɛnsode anaa hann ho banbɔ, a egyina sɛnea nneɛma no gyina pintinn ne mmara kwan so nhwehwɛmu so.

PVC a ɛyɛ den a ɛnyɛ den no ma wonya thermoforming adwumayɛ a ɛho nhia pii na ɛbɔ nneɛma a atwa yɛn ho ahyia ho ban titiriw, nanso ɛnsɛ sɛ wɔpaw no ara kwa ma nnuru a ɛyɛ nsu a ɛyɛ nwini kɛse anaasɛ ɛma oxygen nka. Ɛsɛ sɛ nnuru a wɔde paw nnuru no gyina nnuru a egyina pintinn, bere a wɔde asie a wɔde asi wɔn ani so, wim tebea a wɔkyekyɛ ne akisikuru nhyehyɛe a edi mũ so.

Rigid PVC Nnuruyɛ Film Mfonini ahorow

Nnuruyɛ Rigid PVC Film Nkyerɛkyerɛmu

Ɛsɛ sɛ wɔde roll dimensions hyia blister afiri, forming tooling, unwind nhyehyɛe ne production ahoɔhare. Ɛsɛ sɛ wɔpene nsɛm a etwa to so denam line trials ne nnuru a wɔde kyekyere nneɛma ho ahwehwɛde so ansa na wɔayɛ no aguadi mu.

Ahwehwɛde Titiriw a Ɛfa Nnuru PVC Blister Film ho

Nneɛma a Ɛyɛ Den a Ɛkɔ So Daa

Gauge consistency boa boa uniform cavity formation, stable web handling ne repeatable nsɔano tebea horow. Ɛsɛ sɛ wɔn a wɔtɔ nnuru no kyerɛkyerɛ ahwehwɛde ahorow a ɛfa sɛnea nnuru no mu duru ne nea wɔde gyina ano mu sɛ nea wɔapene so no fã.

Thermoforming a Wotumi De Ho To So

Ɛsɛ sɛ PVC sini no yɛ abura a ɛkɔ so daa a ɛnyɛ teateaa dodo, ɛkyinkyim anaasɛ wɛb ntumi nnyina pintinn. Forming suban gyina film grade, gauge, cavity geometry, heater nhyehyɛe, line ahoɔhare ne forming nhyɛso.

Faako a Ɛho Tew ne Optical Quality

Anka ɛsɛ sɛ nnuruyɛ mu PVC a emu da hɔ hwɛ aniwa so yiye a ɛnyɛ gel, ahwehwɛ nsɛntitiriw, nsensanee tuntum, nsensanee, ahurututu, nhama a ɛsen ne sintɔ afoforo a ebetumi aka sɛnea ɛte anaa mfiri no adwumayɛ kakraa bi.

Lay-Flat ne Winding a Wɔhyɛ So

Controlled flatness, winding tension, roll edges ne surface slip boa forming web no tu mmirika daa fa blister packaging afiri no mu.

Batch Traceability a Wɔde Di Dwuma

Ɛsɛ sɛ wɔn a wɔtɔ nnuru a wɔde kyekyere nnuru no kyerɛkyerɛ ahwehwɛde ahorow a ɛfa lot a wɔde kyerɛ, roll labels, nhwehwɛmu kyerɛwtohɔ, adansedi nkrataa ne nsakrae a wɔhwɛ so wɔ nneɛma a wɔde ma ho nkyerɛkyerɛmu a wɔapene so no mu.

Nnuruyɛ mu Blister Packaging Adeyɛ

Wɔ nnuru a wɔde yɛ akisikuru a wɔde ɔhyew ayɛ mu no, wobue PVC a ɛyɛ den no mu na wɔma ɛyɛ hyew ma ɛyɛ hyew a wɔahyɛ so. Wɔde vacuum, pressure anaa mfiri mmoa na ɛyɛ web a ɛyɛ hyew no ma ɛbɛyɛ abura a egyina nnwinnade a wɔde kyekyere nneɛma so.

Afei wɔde tablet anaa capsules gu abura no mu. Wɔde aluminium lidding foil a ɛne no hyia si web a wɔayɛ no so na wɔde ɔhyew, nhyɛso ne bere a wɔde tra hɔ a wɔahyɛ so na ɛsɔ ano. Afei wɔde code hyehyɛ blister a wɔawie no mu, wɔto mu, twa na wɔhwɛ mu sɛnea wɔde ahyɛ mu no.

Ɛsɛ sɛ wɔsɔ forming web, lidding foil, heat-seal lacquer, cavity design ne mfiri nhyehyeɛ hwɛ sɛ packaging system baako sen sɛ wɔbɛyɛ nneɛma a ɛde ne ho.

Plain PVC vs High-Akwansideɛ Nnuruyɛ Blister Films

Wɔde PVC a ɛyɛ den a ɛnyɛ den di dwuma kɛse ma nnuru a wɔde yɛ akisikuru a wɔtaa de di dwuma, nanso ɛma nsu a ɛyɛ nwini a ɛba fam sen adan a wɔde akwanside a ɛkorɔn akata so anaasɛ wɔayɛ no laminated. Ɛsɛ sɛ wɔpaw nneɛma a ɛfata fi product-stability data mu sen sɛ wɔbɛpaw ɛka anaasɛ forming performance nkutoo.

HSQY deɛ no            nnuruyɛ PVC packaging nneɛma ahorow no bi        ne rigid PVC ne nea ɛfa ho laminated anaasɛ coated structures ma blister packaging ahwehwɛde ahorow.

Sɛnea Wɔpaw PVC Film Thickness ma Blister Packaging

Ɛsɛ sɛ wɔpaw film no mu duru sɛnea cavity geometry, dosage-form dimensions, web width, stiffness a wɔhwehwɛ, forming depth ne blister machine tebea te. Abura a emu dɔ anaasɛ ɛyɛ den betumi ama mpɔtam hɔ ayɛ mmerɛw kɛse bere a wɔreyɛ thermoforming no.

Custom Roll Nkyerɛkyerɛmu ma Blister Packaging Lines

Ɛsɛ sɛ wɔn a wɔtɔ nnuru a wɔde yɛ blister-film no kyerɛ nea ɛboro ne tɛtrɛtɛ ne ne kɛse so. Roll nhyehyeɛ nya unwind stability, nsakraeɛ frequency ne mfiri dwumadie so nkɛntɛnsoɔ tẽẽ.

• Film kɛse ne abodwokyɛre.

• Slit trɛw ne ntrɛwmu tolerance.

• Core mu diameter ne core nneɛma.

• Maximum roll abɔnten diameter.

• Maximum roll weight a afiri no gye tom.

• Winding akwankyerɛ.

• Surface slip anaasɛ blocking ahwehwɛde.

• Nkwammoaa anaa nhama dodow a wɔma ho kwan a ɛsen biara.

• Roll label ne batch-traceability ahwehwɛde ahorow.

• Ahobammɔ packaging ne pallet specification.

Aluminium Lidding Foil a ɛne ne ho hyia

Wɔtaa kata PVC a ɛyɛ den so wɔ nnuruyɛ mu aluminium a wɔde piapia mu a wɔde ɔhyew-nsɔano lacquer a ɛne PVC hyia akata so. Nsɔano a wotumi de ho to so gyina nkabom koraa a ɛyɛ film, lacquer, nsɔano hyew, nhyɛso, bere a wɔde tra hɔ ne nsɔano-adwinnade nhyehyɛe.

Ansa na wɔbɛpene aguadi so no, ɛsɛ sɛ converter no di nsɔano ahoɔden, ne hwɛbea, leak adwumayɛ ne package no mudi mu kura ho adanse wɔ production ne stability tebea horow a wɔakyerɛ no ase.

Nnuruyɛ mu Rigid PVC Film a wɔde di dwuma

Wɔde PVC a ɛyɛ den a ɛnyɛ den di dwuma titiriw sɛ ntama a wɔde yɛ nnuru a ɛyɛ den a ɛyɛ den kakra wɔ baabi a ɛho hia sɛ wɔyɛ no pefee, wɔyɛ no sikasɛm mu mfaso ne thermoforming adwumayɛ a ɛyɛ gyinapɛn.

Tablet Blister Packaging: blister cavities a emu da hɔ anaasɛ ɛwɔ kɔla ma tablet formats kurukuruwa, oval ne afoforo.

Capsule Blister Packaging: Cavities a wɔayɛ no hyew a wɔde yɛ capsules a ɛyɛ den ne capsule nneɛma afoforo a ɛfata.

Pill ne Nutraceutical Packaging: Wɔapaw solid-dose akwahosan ne nutraceutical nneɛma bere a wɔayɛ nneɛma ne sɛnea ɛyɛ den ho nhwehwɛmu akyi.

Mmoa Nnuru a Wɔde Hyehyɛ: Mmoa ho nnuru a wɔapaw ne capsules a ɛwɔ baabi a blister nhyehyɛe a wɔapene so no di nneɛma a wɔhwehwɛ ho dwuma.

Nsu-dose, suppository ne high-barrier dwumadie betumi ahwehwɛ sɛ wɔde laminated anaa coated structures titire sen sɛ standard mono rigid PVC.

Nnuruyɛ Pa ne Nwoma a Wɔhwehwɛ

Nnuru a wɔde kyekyere nneɛma titiriw hwehwɛ sɛ wonya nneɛma pɔtee bi ho ahwehwɛde. Ɛnsɛ sɛ wobu adwumakuw no adansedi nkrataa a ɛfa nneɛma nyinaa ho anaasɛ nnipa foforo nhwehwɛmu amanneɛbɔ sɛ adanse a ɛdɔɔso a ɛkyerɛ sɛ wɔapene PVC grade pɔtee bi so ama aduru biara anaa gua biara.

Ɛsɛ sɛ adetɔfo si nkrataa a wɔhwehwɛ ma nneɛma no grade pɔtee, beae a wɔyɛ ne gua a wɔde kɔ no so dua. Ɛdenam nhyehyɛe a wɔde hwehwɛ ahwehwɛde so no, ebia nea ɛka nneɛma a wɔabisa no ho:

• Aguade ho nkyerɛkyerɛmu a wɔapene so.

• Adansedie krataa a ɛkyerɛ sɛ wɔayɛ nhwehwɛmu anaa Adansedie krataa a ɛkyerɛ sɛ wɔayɛ adwuma wɔ baabi a ɛfata.

• Batch ne roll a wɔde hwehwɛ nneɛma mu.

• Raw-material ne restricted-substance ho nsɛm.

• Nnuru a wɔde kyekyere nneɛma ho anaa nnuruyɛ ho nkrataa a ɛfata wɔ baabi a ɛwɔ.

• Nwoma a ɛfa nneɛma pa ho a ɛfa beaeɛ a ɛfa nneɛma a wɔyɛ no ho.

• Nsakrae-hwɛ ne amanneɛbɔ ahwehwɛde ahorow.

• Nsɛm a wɔkora so, bere a wɔde sie ne nea wɔsan sɔ hwɛ wɔ baabi a ɛfata.

Nneɛma a Wɔde Hwɛ Nneɛma a Ɛyɛ Paara

Nnuru PVC Film a Wɔkora So ne Nea Wɔde Di Dwuma

Fa nnuru a wɔde yɛ PVC nhoma mmobɔwee no sie wɔn mfitiase ahobammɔ nneɛma mu wɔ baabi a ɛho tew, ɛhɔ yɛ kusuu na mframa wom a wɔde sie a ɛnyɛ owia hann tẽẽ, ɔhyew a ɛboro so, mfutuma ne efĩ.

Sɛ wɔde nhoma mmobɔwee fi adekoradan a awɔw wom mu kɔ baabi a wɔyɛ nneɛma a ɛhɔ yɛ hyew a, ma bere a ɛfata de siesie ansa na woabue nneɛma a wɔde bɔ ho ban no na ama asiane a ɛwɔ hɔ sɛ nsu a ɛbɛtɔ sini no ani no so atew.

Ɛsɛ sɛ bere a wɔde sie, ahwehwɛde ahorow a wɔsan sɔ hwɛ ne nneɛma a atwa yɛn ho ahyia anohyeto biara di nneɛma ho nkyerɛkyerɛmu a wɔapene so a wɔde ama ama grade pɔtee no akyi.

Nsɛm a Ɛho Hia ma Nnuru PVC Film Quote

• Wɔhwehwɛ sɛ ɛyɛ kɛse na ɛyɛ nea wotumi gyina ano.

• Slit roll trɛw ne abodwokyɛre.

• Core mu diameter.

• Maximum roll diameter anaa roll mu duru.

• Kɔla a emu da hɔ, tinted anaa opaque ahwehwɛde.

• Blister mfiri yɛfo ne model wɔ baabi a ɛwɔ.

• Cavity nsusuwii anaasɛ blister mfonini.

• Tablet, capsule anaasɛ dosage-form type foforo.

• Ɛho hia sɛ wɔde kata so foil ne sealing system.

• Target gua ne nnuruyɛ ho nkrataa a wɔhwehwɛ.

• Dodow a edi kan ne afe afe dodow a wobu akontaa.

• Packing ahwehwɛde ne destination hyɛn gyinabea.

Adansedi ne Nwoma a Ɛfoa So

Wɔakora abodin krataa mfonini a ɛwɔ aseɛ ha no so afiri mfitiaseɛ afiri kratafa no so. Ɛsɛ sɛ adetɔfo bisa nkrataa a ɛwɔ hɔ mprempren, a ɛfa nneɛma pɔtee bi ho ma nnuru PVC grade pɔtee ne beae a wɔyɛ no sen sɛ wɔde wɔn ho bɛto adansedi krataa mfonini a ɛwɔ hɔ nyinaa so nkutoo.

Sɛ wo ahwehwɛdeɛ nhyehyɛeɛ no hwehwɛ sɛ wokyerɛw nnuruyɛ, mmara, DMF, quality-system anaa restricted-substance ho nkrataa pɔtee bi a, fa nkrataa a wɔhwehwɛ no din ma ansa na woapene nhwɛsoɔ so anaasɛ woahyɛ aguadi.

HSQY Plastic Kuw Wiase Nyinaa Nneɛma a Wɔde Kyerɛkyerɛ

HSQY Plastic Kuw no hyia nnuru a wɔde kyekyere nneɛma a wɔsakra, wɔn a wɔkyekyɛ ne mfiridwuma mu adetɔfo wɔ amanaman ntam ɔyɛkyerɛ ahorow mu de susuw nneɛma nhyehyɛe, blister-machine specifications, trial rolls, quality requirements ne bere tenten a wɔde ma ho nhyehyɛe ahorow ho.

Nsɛm a Wɔtaa Bisa Fa Nnuru PVC Film Ho

Dɛn ne nnuru a ɛyɛ den PVC sini?

Nnuru a ɛyɛ den PVC film yɛ thermoformable forming web a wɔde yɛ cavities wɔ blister packs ma tablets, capsules ne afoforo a ɛfata solid-dose nneɛma.

PVC film a ɛyɛ duru bɛn na wɔde yɛ nnuru a wɔde yɛ akisikuru?

Saa HSQY nneɛma a wɔakyerɛw yi kata 0.15mm kosi 0.5mm so. Gauge a ɛteɛ no gyina cavity bun, dosage-form dimensions, blister tooling ne production tebea so.

So wɔtaa de 250 micron PVC di dwuma de kyekyere akisikuru?

Bɛyɛ micron 250 yɛ ade a wɔtaa de kyerɛ PVC a ɛyɛ den a wɔde yɛ nnuru, nanso ɛnsɛ sɛ wɔpaw no ara kwa. Ɛsɛ sɛ gauge a wɔapene so no ne cavity geometry, blister machine ne drug-packaging validation no hyia.

Nsonsonoe bɛn na ɛwɔ PVC ne PVC/PVDC blister film ntam?

Plain PVC ma forming nnyinaso ne mfitiase akwanside. PVC/PVDC de PVDC akwanside a ɛma nsuo ne oxygen tumi gyina ano kɛseɛ ka ho, na ɛma ɛfata kɛseɛ ma nnuru a ɛyɛ mmerɛw.

So PVC a ɛnyɛ den fata ma aduru biara?

Dabi, wɔtaa paw PVC a ɛnyɛ den ma nnuru a ɛyɛ den kakra a akwanside a ɛho hia a ɛkɔ fam. Nnuru a ɛyɛ nsuo, oxygen-te nka anaa hann-te nka no betumi ahia sɛ wɔde akwansideɛ a ɛkorɔn anaa hann bɔ ho ban wɔ nneɛma a wɔde kyekyere nneɛma ho wɔ bere a wɔahwɛ sɛnea ɛgyina pintinn akyi.

So HSQY betumi ayɛ PVC sini no trɛw sɛnea wɔpɛ?

Aane. HSQY betumi asusuw slit trɛw a wɔayɛ no sɛnea wɔpɛ ho akosi wɛb trɛw a ɛsen biara a wɔakyerɛw no 1000mm. Fa blister afiri no, tooling trɛw ne abodwokyɛre a wɔhwehwɛ ma bere a worebisa quotation.

Dɛn ne roll diameter a ɛsen biara?

Mprempren nneɛma ho nsɛm kyerɛ sɛnea roll diameter a ɛsen biara bɛyɛ 600mm. Ɛsɛ sɛ wɔde roll diameter a etwa to ne roll no mu duru hyia customer no unwind system no.

So PVC sini a ɛyɛ den betumi asɔ aluminium blister foil ano?

Yiw, sɛ aluminium lidding foil no de heat-seal lacquer a ɛne PVC hyia di dwuma na sealing temperature, nhyɛso ne bere a ɛtra hɔ no yɛ nea wogye tom yiye.

So wobetumi de kɔla ayɛ nnuru a wɔde yɛ PVC sini?

Wobetumi asusuw kɔla anaa opaque grades ho de ahu, sɛnea ɛte anaa hann-ahobammɔ ahwehwɛde ahorow a wɔapaw. Ɛsɛ sɛ wɔhwɛ nnuru a wɔde yɛ no mu na wɔfata ma nnuru a wɔahyɛ da ayɛ no.

So PVC a ɛyɛ den fata ma nsu anaa suppository a wɔde kyekyere nneɛma?

Ɛnsɛ sɛ wɔkyerɛ standard mono rigid PVC no ara kwa ma saa dwumadie yi. Nsu-dose ne suppository packaging taa hwehwɛ laminated structures soronko a wɔapaw ama sealing, nnuru a ɛne ne ho hyia, flexibility ne filling tebea horow.

Nwoma bɛn na ɛsɛ sɛ mebisa ma nnuru a wɔde yɛ PVC film?

Nwoma a wɔkyerɛw no gyina gua a wɔde wɔn ani asi so ne nhyehyɛe a wɔde hwehwɛ ahwehwɛde no so. Ɛsɛ sɛ adetɔfo bisa nkrataa a ɛfa aduru no grade pɔtee ne beae a wɔyɛ no ho, a nea ɛka ho ne nkyerɛkyerɛmu a wɔapene so, batch nkrataa ne nnuru anaa mmara a ɛboa nkrataa a ɛfata.

So metumi anya nhwɛsode ahorow de ayɛ blister mfiri mu nhwehwɛmu?

Wobetumi asi nhwɛsode a ɛwɔ hɔ no so dua sɛnea ne kɛse ne ne tɛtrɛtɛ te. Sɔhwɛ nhoma mmobɔwee yɛ papa bere a wɔresusuw wɛb ho dwumadie, nhyehyɛɛ, ahyɛ mu ma ne nsɔano wɔ aguadi blister line so.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Yɛsrɛ sɛ fa thickness, slit trɛw, core size, roll diameter anaa roll weight, dosage form, blister machine, cavity dimensions, kɔla, afe afe ahwehwɛde, mmara kwan so gua, nkrataa ahwehwɛde, packing kwan ne destination port ma.

Dɛn Nti na Wotɔ Nnuru PVC Film fi HSQY?

HSQY de PVC film a ɛyɛ den ne nnuru a ɛfa ho a wɔde kyekyere nnuru ma wɔn a wɔyɛ nnuru, wɔn a wɔdannan nnuru a wɔde kyekyere nneɛma ne wɔn a wɔkyekyɛ. Adetɔfo betumi asusuw customized gauge, slit trɛw, roll diameter, kɔla, packing ne sɔhwɛ nneɛma sɛnea wɔn blister lines.

Send HSQY wo blister mfiri model, cavity drawing, dosage-form sensitivity, botae gua ne afe afe adetɔ dodow. Yɛn kuw no betumi ahwɛ sɛ ebia ɛsɛ sɛ wosusuw PVC a ɛnyɛ den anaasɛ akisikuru a ɛwɔ akwanside a ɛkorɔn ho ma adwuma no anaa.