Transparent Klia Plastik PET/PE Laminated Film Fɔ Plastik Fud tre

Transparent PET/PE Laminated Film fɔ Fud tre s

HSQY de mek transparent PET/PE laminated film fɔ thermoformed it trey dɛn , fɔm-fil-sil pak, mit trey dɛn , fish trey dɛn , pɔltri pak, chiz pak, deli prodak ɛn ɔda chilled it aplikeshɔn.

di matirial na semi-rigid thermoformable bottom web we kכnsis fכ wan APET strכkchכral layεr we kכmbayn wit wan PE siling layεr. Di PET layt de gi transparency, rigiditi ɛn fɔm sɔpɔt, we di PE layt de gi ɔt-silin funkshɔnaliti ɛn mɔstɔ rɛsistɛns.

Di prodak we dɛn sho de insay totɛl tik frɔm lɛk 0.23mm to 0.58mm. Wan rεfrεns kכnstrכkshכn de yuz wan aprכksimatli 50μm PE siling layεr, we di PET tiknes, PE tiknes εn tכtal laminat strכkchכ kin kכstom akɔdin to di tre disayn εn pak layn.

Yu kin gi klia rol pan 3-inch ɔ 6-inch pepa kɔr wit kɔstɔmayz rol wit, rol lɔng, rol wet, ɔdasay dayamita ɛn waynd dairekshɔn.

Pilabl ɛn weld-sil pak opshɔn dɛn kin divɛlɔp akɔdin to di lidding film we dɛn dɔn pik, siling tɛmpracha, dwɛl tɛm, prɛshɔn, tre -flɛnj dizayn ɛn nid fɔ opin fɔs.

Standard PET/PE de gi klia prɛzɛntɛnshɔn, thermoformability ɛn rili silin. Prodakt dɛn we nid fɔ gɛt ɛkstend shelf layf, modifyed atmosfɛs pak ɔ wan spɛsifikɛd ay ɔksijɛn barɛri fɔ yuz wan strɔkchɔ wit verified OTR ɛn WVTR valyu, lɛk PET/EVOH/PE usay i fayn.

Eksplɔrɔ di HSQY PET/PE lamineshɔn film rɛnj, PET/PE it pak trey dɛn ɛn PET/EVOH/PE ay-barɛri trey dɛn.

Rikwest PET/PE Fim Prayz    Rikwest Fɔm ɛn Sial Sampul dɛn

PET/PE Laminated Film Vidio

Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY PET/PE laminated film, thermoforming aplikeshɔn, rol fɔmat ɛn kɔstɔmayt it-pak sɔlvishɔn.

Wetin Na PET/PE Laminated Film?

PET/PE laminated film na wan mכltilayεr pak mεtirial we de kכmbayn wan rigid כ sεmi-rigid polyethylene terephthalate layεr wit wan polyethylene siling layεr.

APET de gi di praymar strכkchכ, stiffnεs, transparency εn tεmכfכm sכpכt. PE de gi wan say we yu kin sial wit it-kɔntakt, mɔstɔ rɛsistɛns ɛn ɔda tafnɛs.

di tεm we dεn de tεmכfכm, dεn de drכ di laminat we dεn hεt insay kכva fכ mek trey dɛn כ bכtכm pak dεm. afta dat dεn de lod it insay di fכm kεviti dεm εn dεn de sial wan kכmpatibl tכp film to di tre flenj.

di matirial kin dεskrεb bak as A PET/PE bכtכm wεb, rigid PET/PE film, PET/PE tεmכfכm rol, klia tre -fכm film כ PET/PE fכm-fil-sil film.

PET/PE Tεrmofכmεnt Bכtכm Film vs. Liding Film

Dis prodakt de fכs posishכn as tεmכfכmabl PET/PE bכtכm wεb כ tre -fכm mεtirial pas kכvεshכnal fleksibul lid film.

Transparent PET/PE Fim Imej dɛn

A PET/PE Laminated Film Spɛsifikeshɔn dɛn

Faynal spesifikeshɔn dɛn fɔ tɔk bɔt di kɔmplit layt strɔkchɔ, totɛl tiknes, wan wan layt tiknes, wit tolɛreshɔn, rol lɔng, kɔr dayamita, ɔdasay dayamita, wayndin dairekshɔn, optik kwaliti, barɛri valyu ɛn siling rikwaymɛnt.

PET ɛn PE Lay Fɔnkshɔn dɛn

Peel Seal vs. Weld Sial Paket

Peel ɔ weld pefɔmɛns na di kɔmplit pak sistɛm de mek am. Di bɔt wɛb, liding film, silan layers, tre flɛnch, prodak kɔntaminɛshɔn, tɛmpracha, prɛshɔn ɛn di tɛm we dɛn de de fɔ validet togɛda.

Thermoforming Pɛfɔmɛns Rikwaymɛnt dɛn

Yunifɔmiti fɔ Ɔt

di PET/PE laminate fכ hεt ivin kכros di wεb fכ ridyus lokal כva strεch, wrinkles εn inkכmplit fכm.

Fɔm Dip ɛn Draw Rɛshɔn

Dip kaviti, smɔl kɔna ɛn ay drɔ rɛsɛshɔn kin nid fɔ gɛt tik PET layt, ɔptimayz mold rayus, plɔg ɛp ɔ prɛshɔn fɔm.

Distribyushɔn fɔ di Tik we di Wɔl Tik

Di kɔna ɛn saydwɔl dɛn we dɔn fɔm fɔ gɛt inof tik fɔ mek dɛn nɔ panch, krak ɛn difɔmeshɔn we dɛn de ful-ɔp ɛn transpɔt.

Layer Adhesion we de na di wɔl

PET εn PE layεr dεm fכ de bכnd we dεn de hεt, strεch, trim, sial, chil εn pכket opin.

Mold Rilis ɛn Denest

Mold draft, surface friction en stacking geometry afekt rilis frכm di mold εn separeshכn fכ finish trey dɛn .

Trim ɛn Skrap Handling

Di laminat we dɛn dɔn fɔm fɔ trim klin wan we nɔ gɛt bɔku bɔku bɔr, krak krak we dɛn nɔ kɔntrol ɔ delamination na di ed we dɛn kɔt.

Standart ɛn Ay-Baria PET/PE Strukchɔ dɛn

OTR, WVTR ɛn MAP Rikwaymɛnt dɛn

Barɛri pefɔmɛns fɔ ɛksprɛs yuz valyu dɛn we dɛn mɛzhɔ pas jenɛral diskrɔpshɔn lɛk ɛksɛlɛnt ɔ supia barɛri.

Di kɔndishɔn fɔ tɛst, inklud di tɛmpracha ɛn rilitiv humiditi, fɔ tɔk togɛda wit ɛvri barɛri valyu.

Aplikeshɔn dɛn fɔ PET/PE Laminated Film

• Fresh mit trey dɛn : Klia thermoformed pak fɔ bif, bɔd ɛn prosɛs mit.

• Pɔltri pak: Trey ɛn fɔm-fil-sil pak fɔ chukchuk ɛn ɔda kol bɔd.

• Fish ɛn sifud: Klia pak dɛn we nid fɔ mek yu nɔ gɛt mɔstɔ, yu nid fɔ mek yu nɔ pank ɛn yu nid fɔ mek di sil nɔ gɛt wanwɔd.

• Chiz pak: Slais, grated, blok ɛn portion chiz prodakt.

• Deli it: Mit we dɛn dɔn pripia, salad, antipasti ɛn kol rɛdi fɔ it.

• Fresh prodɔkt: Frut, vɛjitebul, mɔs ɛn tin dɛn we dɛn dɔn pripia.

• Bekeri ɛn kɔnfɛkshɔn: Klia trey dɛn ɛn displei pak fɔ chill ɔ ambient prodak.

• Modified atmosphere packaging: Dɛn dɔn divɛlɔp ay-baria strɔkchɔ fɔ di gas miksɔp we dɛn nid ɛn shelf layf.

• Vaykum pak: Pak dizayn dɛn we nid strɔng sil ɛn kɔntrol matirial distribyushɔn.

Chilled, Frozen ɛn Tɛmpratura Rikwaymɛnt dɛn

PET/PE laminated trey dɛn na dεn kכmכn fכ divεlכp fכ kol εn sεlekt fכs it dεm, bכt di εksakεt savis-tεmprachכ rεnj mכs validet fכ di strכkchכ we dεn apruv.

Lɔw-tɛmpracha impak, tre krak krak, sil trɛnk, delaminɛshɔn ɛn drɔp pefɔmɛns fɔ tɛst afta di kol-stɔrɔj ​​tɛm we dɛn nid.

Standard A PET/PE nɔ fɔ ɔtomɛtik diskrayb se i fayn fɔ maykrowev ɔt, kɔvɛnshɔnal ɔvin, rɛtɔt prɔsesin ɔ ay-tɛmpracha pastɔrayzeshɔn.

Prodakt dɛn we nid fɔ mek dɛn nɔ ɔt fɔ yuz wan strɔkchɔ we dɛn dɔn mek spɛshal wan ɛn we dɛn dɔn tɛst fɔ di tɛmpracha, di tɛm we dɛn fɔ tek ɛn di we aw dɛn fɔ ɔt.

Fɔd-Kɔntakt ɛn Rigyuletɔri Rikwaymɛnt dɛn

di fכd-kכntakt suitabiliti dipכnt pan di PET rεsin, PE rεsin, adhesive כ tay layεr, aditiv, risaykul kכntεnt, kכlarant εn mεnεkshכn prכsεs.

Di wan dɛn we de bay fɔ no di kɔntri we dɛn de go, di kayn it we dɛn de it, di tɛmpracha we dɛn go kɔntakt, di tɛm we dɛn go kɔntakt am, di kɔndishɔn we dɛn de na frij ɛn if di it gɛt fat, asid, alkol, dairy-based ɔ akyu.

Di dɔkyumɛnt dɛn we de kin inklud fɔd-kɔntakt diklareshɔn, ɔvala ɛn spɛshal maykreshɔn ripɔt, rɛsin diklareshɔn, ristrikt-sɔbstans ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Dɛn fɔ diskrayb wan SGS ripɔt akɔdin to di ɛksaktɔl tɛst we dɛn dɔn kɔmplit ɛn i nɔ de ɔtomɛtiks establish kɔmplians na ɛvri kɔntri ɔ aplikeshɔn.

RoHS rili gɛt fɔ du wit tin dɛn we dɛn dɔn stɔp fɔ yuz na ilɛktrik ɛn ilɛktronik ikwipmɛnt ɛn dɛn nɔ fɔ yuz am as di prinsipal pruf fɔ sef we pɔsin kin gɛt wit it.

Famasiutik ɛn Mɛdikal Pakɛj

Famasiutik ɛn mɛdikal aplikeshɔn dɛn nid fɔ gɛt sɛpret kɔntrol PET/PE gred pas wan jenɛral it- tre spɛsifikɛshɔn.

Di pɔsin we bay fɔ no di prɔdak we dɛn pak, di tin we dɛn de yuz fɔ sidɔm, di we aw dɛn de sterilayz, di tin dɛn we dɛn nid fɔ klin, di tin dɛn we dɛn kin pul, di tin dɛn we dɛn nid fɔ du fɔ maykreshɔn ɛn di standad we dɛn fɔ yuz fɔ mek di pakej-validɛshɔn.

Di kɔmplit mɛdikal ɔ famasitik pakej fɔ validet afta dɛn dɔn fɔm, sial, sterilayz, transpɔt ɛn shelf-layf tɛst.

PET/PE Laminat Risayklɛbiliti

PET εn PE na difrεn polimכr famili, so wan PET/PE laminate nכ fכ כtomatכk dεskrεb as mכno-matεrial כ yunivasal risaykul pכket.

Risaykul kɔmpatibiliti dipen pan di PET pasɛnt, PE pasɛnt, adeziv, EVOH ɔ ɔda fɛnshɔnal layers, kɔlɔ, lɛbl, printin ɛn di risaykul sistɛm we dɛn yuz na di dɛstineshɔn makit.

Prεdominantli PET strכkchכ dεm wit kεriכl kכntrol nכn- PET layεr kin gi bεtε kompitibiliti wit PET tεmכfכm risaykul sistεm, bכt di komplit pakej fכ evaluate εgεst aplikεbl dizayn-fכ-rεsayklin gayd.

Di klem we kɔrɛkt pas ɔl na dat dɛn fɔ asɛs risaykulbiliti yuz di kɔmplit laminat strɔkchɔ ɛn di kɔlɛkshɔn, sɔt ɛn risaykul infrastukchɔ we de na di lokal.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• PET , PE, adhesive ɛn aditiv verifyeshɔn.

• Total tiknes ɛn individyual layt tiknes.

• Transvas tiknes profayl ɛn tiknɛs tolɛreshɔn.

• Rol wit, rol lɔng, net wet ɛn pepa-kɔr dimɛnshɔn.

• Rol ausayd dayamita, winding dairekshɔn ɛn winding tɛnsiɔn.

• Rol flatnɛs, tɛliskɔp, blɔk ɛn edj kwaliti.

• Layt transmishɔn, haz, klia, tint ɛn vishɔnal difrɛns.

• PET -to-PE laminat bond trɛnk.

• Delamination afta fכm, sial, chil εn pil.

• Tensile strength, elongation, stiffness ɛn impak rɛsistɛns.

• Pankchɔ ɛn shap-bɔn rɛsistɛns usay dɛn nid am.

• Tɛrmofɔmin winda, wɛb sag ɛn itin yunifɔmiti.

• Fɔm dip ɛn wɔl-tiknɛs distribyushɔn.

• Mold rilis, stak ɛn denest pefɔmɛns.

• Trim ɛn kɔt-ɛj kwaliti.

• Sil initiashɔn tɛmpracha ɛn sial winda.

• Pil fos ɔ weld-sil trɛnk.

• Sil kɔntaminɛshɔn, lik ɛn bɔrst tɛst.

• OTR, WVTR ɛn CO2 transmishɔn usay dɛn spɛsifa.

• MAP gas-ritɛnshɔn tɛst usay dɛn nid am.

• Kol-stɔrɔj, friz, drɔp ɛn transpɔt tɛst.

• Fɔd-kɔntakt maykreshɔn ɛn dɔkyumɛnt rivyu.

• Inspekshɔn fɔ pak, palet ɛn kɔntena-lod.

Kastom PET/PE Laminated Film Opshɔn dɛn

• Tכtal tiknes frכm aprכksimatli 0.23mm to 0.58mm.

• Kastomiz PET ɛn PE layt tiknɛs.

• Standart PET/PE ɛn ay-baria PET/EVOH/PE strɔkchɔ dɛn.

• Virgin PET ɛn aplikeshɔn-spɛsifi k r PET strɔkchɔ dɛn.

• Klia, layt-blu, blak, wayt ɛn kɔstɔm kɔlɔ dɛn.

• Kastomiz rol wit, lɔng, wet ɛn ɔdasay dayamita.

• 3-inch ɛn 6-inch pepa kɔr dɛn.

• PE sayd in ɔ PE sayd aut winding.

• Dizayn dɛn we dɛn kin yuz fɔ pak tin dɛn we dɛn kin pul ɛn weld-sil.

• Vaykum, MAP ɛn chill-fud pak gred dɛn.

• Anti-fog top-film maching sɔpɔt.

• Sampul fɔ fɔm, sial ɛn barɛri tɛst.

• Kastomiz rol lebul, katon, palet ɛn shiping mak.

Infɔmeshɔn we dɛn nid fɔ mek PET/PE Film Quote

• Fɔd ɔ prɔdak we dɛn pak.

• Shelf layf we dɛn nid ɛn tɛmpracha fɔ kip.

• Vaykum, ay, MAP ɔ ɔda pak atmosfɛs.

• Rikwayd tot ɔl film tik.

• Rikwayd PET , PE ɛn barɛri-layer tiknɛs.

• Rikwayd rol wit ɛn wit tolɛreshɔn.

• Rikwayd rol lɔng, rol wet ɛn maksimal ɔdasay dayamita.

• 3-inch ɔ 6-inch pepa kɔr.

• PE sayd in ɔ PE sayd aut winding dairekshɔn.

• Klin, kɔlɔ ɔ opaque apinans.

• Thermoforming-mashin mɔdel ɛn layn spid.

• Mold dimɛnshɔn, kaviti dip ɛn drɔ ratio.

• Selekt lidding-film matirial ɛn tik.

• Peelable ɔ weld-sial rikwaymɛnt.

• Rikwayd sil tempɔret, prɛshɔn ɛn tɛm fɔ de.

• OTR, WVTR ɔ CO2 transmishɔn we dɛn nid.

• Rikwayd pankchɔ, impak ɛn lik pefɔmɛns.

• Destination market ɛn fud-kɔntakt dɔkyumɛnt dɛn.

• Initial ɔda kwantiti ɛn ɛstimat ɛni ia dimand.

• Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu PET/PE Film Rikwaymɛnt dɛn

Pak ɛn Deliv

Sampul pak: A4 sheet matirial s, kot sampl ɛn shɔt tɛst rol dɛn kin pak insay protɛktiv bag ɛn kɔriɔ katon.

Rol pak: PET/PE rol kin rap wit PE film, moisture-resistant matirial, kraft pepa ɛn edj protɛkshɔn.

Kor protɛkshɔn: Dɛn kin protɛkt pepa kɔr ɛn rol ɛnd fɔ ridyus krɔsh, kɔntaminɛshɔn ɛn ed damej.

Palet pak: Rifrɛns palet lod na lɛk 500-2000kg dipen pan di rol dimɛnshɔn ɛn di tin dɛn we dɛn nid fɔ handle.

Kɔntena lod: Rifrɛns lod na lɛk 20 tan, we de ɔnda di rol dayamita, palet layout, kɔntena volyum ɛn ligal wet limit.

Sampul shiping: Dɛn kin sɛn sampul dɛn bay DHL, FedEx, U PS , TNT ɔ ɔda kɔriɔ we dɛn gri fɔ.

Prodakshɔn lida tɛm: Standart prodakshɔn nɔmal wan nid lɛk 10-14 wok dez afta spɛsifikɛshɔn, sampul, pak ɛn pemɛnt kɔnfɔmeshɔn.

PET Teknik Data Shit

Di PET data sheet matirial we de, dɛn kip am dɔŋ fɔ jenɛral rɛfrɛns.

Bifo yu yuz am fɔ bay ɔ fɔ rigul, kɔnfɔm se di matirial gred, PET layt, PE layt, adeziv, tiknɛs, say we dɛn mek am ɛn di de we dɛn gi am, de aplay to di ɛksaktɔl PET/PE laminate we dɛn de saplae.

   Daunlod PET Data Shit

Sɛtifiket ɛn Tɛst Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt di prɔdak spɛsifikɛshɔn, it-kɔntakt diklareshɔn, maykreshɔn ripɔt, ristrikt-sɔbstans ripɔt, barɛri tɛst ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Ɛni dɔkyumɛnt fɔ verify agens di ɛksaktɔl PET rɛsin, PE rɛsin, adeziv, risaykul kɔntinyu, tɔtal tiknɛs, layt strɔkchɔ ɛn di say we dɛn mek am.

SGS, RoHS ɛn REACH ripɔt dɛn fɔ diskrayb akɔdin to dɛn aktual tɛst skɔp pas fɔ trit dɛn as intachɛnjabl it-kɔntakt sɛtifiket.

Wetin Mek Yu Pik HSQY as Yu PET/PE Film Supplier?

• PET/PE thermoforming bottom web fɔ it trey dɛn .

• Tכtal tiknes frכm aprכksimatli 0.23mm to 0.58mm.

• Kastomiz PET ɛn PE layt kɔnstrɔkshɔn dɛn.

• Klia, kɔlɔ ɛn aplikeshɔn-spɛsifi k strɔkchɔ dɛn.

• Standart ɛn ay-baria pak opshɔn dɛn.

• Peelable ɛn weld-sil pakej-divɛlɔpmɛnt sɔpɔt.

• 3-inch ɛn 6-inch rol kɔr dɛn.

• Kastomiz rol wit, lɔng, wet ɛn winding dairekshɔn.

• Sampul fɔ thermoforming, siling ɛn barɛri ɛvalueshɔn.

• Fɔd-kɔntakt dɔkyumɛnt sɔpɔt bays pan di gred we yu dɔn pik.

• Kwaliti inspekshɔn agens di spɛsifikɛshɔn dɛn we dɛn dɔn gri fɔ.

• Ekspɔt pak ɛn intanashɔnal shiping sɔpɔt.

Bifo bɔlk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di PET/PE fim we dɛn dɔn pik pan di kɔstɔma in aktual tɛmfɔmin mashin, mold, filin layn, lidin fim ɛn tre -siling ikwipmɛnt.

Kontakt HSQY fɔ Sampul ɛn Prayz

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET/PE Laminated Film

Wetin na PET/PE laminated film?

Na wan multilayer matirial we de kɔba wan PET strɔkchɔral layt wit wan PE siling layt fɔ thermoformed trey dɛn ɛn fud-pakage aplikeshɔn.

Dis na bottom web ɔ na lidding film?

Dis prodakt na fכs fכ sεmi-rigid tεmכfכm bכtכm wεb we dεn de yuz fכ fכm trey dɛn כ lכw paket kεviti dεm.

Wetin na di difrɛns bitwin bottom wɛb ɛn lidding film?

di bכtכm wεb de tεmכfכm insay di tre , we di tin liding film de sial oba di ful pakej.

Us tik tik dɛn de?

di kכrant prodakt rεnj na aprכksimatli 0.23-0.58mm in tכtal tiknes.

Di PE layt de ɔltɛm 50μm?

aprכksimatli 50μm na rεfrεns strכkchכ. Di PE tiknes kin adjɔst akɔdin to siling ɛn aplikeshɔn rikwaymɛnt.

Wetin di PET layt de du?

PET de gi transparency, rigiditi, dimɛnshɔnal stεbiliti ɛn sɔpɔt di tɛm we dɛn de tεmכfכm.

Wetin di PE layt de du?

PE de gi di ɔt-silin sɔfa, mɔstɔ rɛsistɛns ɛn ɔda tafnɛs.

Yu tink se PET/PE film kin thermoformed?

Yɛs. Wan apruv thermoforming gred kin bi vaykum ɔ prɛshɔn fɔm insay trey dɛn ɛn bottom pakej.

Yu tink se di fim fayn fɔ yuz fɔm-fil-sil mashin dɛn?

I kin divɛlɔp fɔ fɔm-fil-sil ikwipmɛnt afta di mashin, wit, fɔm dip, rol dayamita ɛn lidding sistɛm dɔn kɔnfyus.

Us rol kɔr dɛn de?

Standart opshɔn dɛn inklud 3-inch ɛn 6-inch pepa kɔr.

Yu tink se dɛn kin kɔstɔmayt di rol wit?

Yɛs. Rol width kin kɔstɔmayz akɔdin to di mashin ɛn mold layout.

Wetin PE sayd in ɔ PE sayd aut min?

i de dεskrεb if di PE siling layεr de fεs insay כ ausayd di wund rol. Di kɔrɛkt dairekshɔn dipen pan di mashin we dɛn de pak.

Wetin na PET/PE pakej we yu kin pul?

Na pakej we dɛn mek fɔ kip di sil intɛgriti we dɛn de sheb am we i de alaw di tɔp fim fɔ pul frɔm di tre wit kɔntrol fɔs.

Wetin na weld-sil paket?

I de yuz wan strɔng sil we dɛn mek fɔ aplikeshɔn dɛn we nid ay sil sikyɔriti, lik rɛsistɛns ɔ tamper ɛvidɛns.

Na di bottom web nɔmɔ de sho di trɛnk we di peel gɛt?

Nɔ. di trɛnk we di pis de dipen pan di bɔt wɛb, di liding film, di layers we de silin, di tɛmpracha, prɛshɔn, di tɛm we i de de ɛn di kɔndishɔn we di flɛnch de.

Na standad PET/PE na ay-ɔksijɛn-baria fim?

Nɔto ɔtomɛtik wan. כksijεn-baria pεrformεns fכ vεrifik yuz wan OTR valyu fכ di εksakεt laminat strכkchכ.

Ustɛm dɛn nid PET/EVOH/PE ?

EVOH barεri layεr kin nid fכ כksijεn-sεnsitiv it dεm, lכng shelf layf εn modify atmosfεr pak.

Yu tink se yu kin yuz di fim fɔ MAP pak?

Yes, we dɛn disayn ɛn validet di strɔkchɔ, OTR, CO2 transmishɔn, silin sistɛm ɛn gas miksɔp fɔ di prɔdak.

PET/PE kin film pak fresh mit?

Yɛs. di barεri, pankshכn, siling εn MAP prכpati dεm we dεn nid fכ pik akɔdin to di mit prodakt εn shelf-layf tכgεt.

I kin pak fish ɛn sifud?

Yɛs. Mɔstɔ, pankchɔ, lik, kol stɔrɔj ​​ɛn ɔda-baria rikwaymɛnt dɛn fɔ kɔnfɔm.

I kin pak chiz?

Yɛs. Baria ɛn CO2 transmishɔn fɔ mach wit di kayn chiz ɛn if i kɔntinyu fɔ machɔ insay di paket.

PET/PE film fayn fɔ frɔzɛn it?

Dɛn kin yuz wan fayn gred afta dɛn dɔn tɛst di lɔw-tɛmpracha impak, sil, delaminɛshɔn ɛn drɔp pefɔmɛns.

Yu tink se PET/PE trey dɛn kin bi maykrowev?

Standard A PET/PE pak nɔ fɔ tek am se i sef na maykrowev. Wan strɔkchɔ we nɔ de ɔt ɛn aplikeshɔn tɛst nid fɔ de.

PET/PE film fud sef?

Fɔd-kɔntakt suitability fɔ kɔnfyus fɔ di ɛksaktɔ PET , PE, adeziv, aditiv, it tayp, tɛmpracha ɛn dɛstineshɔn makɛt.

Yu tink se SGS ripɔt de pruv se dɛn de fala di lɔ we pɔsin kin gɛt wit it?

Na wan ripɔt nɔmɔ we de kɔba di ɛksaktɔl prodak, di we aw dɛn de tɛst ɛn di limit dɛn we dɛn kin yuz kin sɔpɔt wan patikyula kɔmplians stetmɛnt.

RoHS pruv se pak na tin we sef fɔ it?

Nɔ, RoHS de tɔk mɔ bɔt tin dɛn we de mek pɔsin sɔfa na ilɛktrik ɛn ilɛktronik ikwipmɛnt ɛn i nɔ de tek ples fɔ tɛst fɔ kɔntakt it.

Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul?

Aplikeshɔn-spɛsifi k r PET strɔkchɔ dɛn kin evalyu akɔdin to di risaykul pasɛnt, ifɛktiv barɛri ɛn dɛstineshɔn-maket it-kɔntakt rikwaymɛnt.

Na PET/PE laminated film risaykul?

Risaykul dipen pan di kɔmplit laminat strɔkchɔ ɛn di kɔlɛkshɔn, sɔt ɛn risaykul sistɛm dɛn we de na di dɛstineshɔn makit.

Wetin na di minimum ɔda kwantiti?

Di standad MOQ na aprɔksimatli 1000kg. Kastom strɔkchɔ, kɔlɔ ɛn spɛshal barɛri gred kin nid difrɛn kwantiti.

Yu tink se sampul dɛn de?

A4 sheet matirial s we de naw, kɔt pis ɔ limited tɛst rol kin de fɔ fɔm, sial ɛn barɛri ɛvalueshɔn.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshɔn jɔs nid lɛk 10-14 wok dez afta spɛsifikɛshɔn, sampul, pak ɛn pemɛnt kɔnfɔmeshɔn.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di prodak, shelf layf, totɛl tiknes, layt strɔkchɔ, wit, rol dimɛnshɔn, fɔm dip, lidding film, sil tayp, barɛri target, kwantiti ɛn dɛstineshɔn.

Get wan Kastɔm PET/PE Fim Kɔt

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae PET/PE laminated film, PET/EVOH/PE baria film, PET fud trey dɛn , CPET trey dɛn , lidding film, PET sheet matirial s, PVC sheet matirial s ɛn kɔstɔmayz fud-pak matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt thermoforming kɔmni dɛn, mit prɔsesɔ, sifud pak, chiz manifakta, fud-pak kɔnvɔta, impɔtɔ ɛn distribyushɔn wit matirial sɛlɛkshɔn, sampul tɛst, kɔstɔm prodakshɔn, kwaliti inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ kot di prayz ɛn Sampul

HSQY Pakɛj Ɛgzibishin dɛn