Fim ɗin filastik mai haske mai haske PET/PE Fim ɗin filastik mai launi Tire na abinci

Fim ɗin Laminated mai haske PET/PE don Tire na abinci s

HSQY tana ƙera fim mai haske PET/PE don abinci mai tsari tire , marufi mai cike da hatimi, nama tire , kifi tire , fakitin kaji, marufi na cuku, kayayyakin deli da sauran aikace-aikacen abinci mai sanyi.

Kayan yana da wani yanki mai kama da na ƙasa mai kama da na thermoformable wanda ya ƙunshi wani yanki na tsarin APET wanda aka haɗa shi da wani yanki na rufewa na PE. Wannan yanki na PET yana ba da haske, tauri da tallafi na tsari, yayin da layin PE ke ba da aikin rufe zafi da juriya ga danshi.

Samfurin da aka nuna yana samuwa a jimillar kauri daga kimanin 0.23mm zuwa 0.58mm. Tsarin gini yana amfani da kimanin 50µm PE sealing Layer, yayin da kauri PET , kauri PE da jimlar tsarin laminate za a iya keɓance su bisa ga tsarin tire da layin marufi.

Ana iya samar da kwalaye masu haske a kan kwalayen takarda masu inci 3 ko 6 tare da faɗin birgima na musamman, tsawon birgima, nauyin birgima, diamita na waje da kuma alkiblar birgima.

Za a iya ƙirƙirar zaɓuɓɓukan marufi masu cirewa da kuma waɗanda za a iya haɗa su da walda bisa ga fim ɗin murfin da aka zaɓa, zafin rufewa, lokacin zama, matsin lamba, ƙirar flange tire da ƙarfin buɗewa da ake buƙata.

Daidaitaccen PET/PE yana ba da bayyanannen gabatarwa, ƙarfin yanayin zafi da kuma ingantaccen hatimi. Samfuran da ke buƙatar tsawaita lokacin shiryawa, marufi mai kyau na yanayi ko takamaiman shingen iskar oxygen ya kamata su yi amfani da tsari mai ƙimar OTR da WVTR da aka tabbatar, kamar PET/EVOH/PE inda ya dace.

Bincika HSQY PET/PE kewayon fim ɗin lamination, PET/PE marufin abinci tire da kuma PET/EVOH/PE babban shinge tire.

Neman PET/PE Farashin Fim    Nemi Samfura da Rufewa

PET/PE Bidiyon Fim ɗin Laminated

Kalli bidiyon da ke ƙasa don ƙarin koyo game da fim ɗin HSQY PET/PE mai laminated, aikace-aikacen thermoforming, tsarin birgima da mafita na musamman don shirya abinci.

Menene Fim ɗin Laminated PET/PE ?

Fim ɗin da aka PET/PE wani abu ne da aka yi da yadudduka da yawa wanda ya haɗa wani Layer mai tauri ko rabin-tauri na polyethylene terephthalate tare da Layer ɗin rufewa na polyethylene.

APET yana ba da babban tsari, tauri, bayyananne da tallafin thermoforming. PE yana ba da wurin da abinci zai iya rufewa, juriya ga danshi da ƙarin tauri.

A lokacin da ake yin thermoforming, ana zana laminate mai zafi zuwa cikin ramuka don ƙirƙirar tire ko fakitin ƙasa. Sannan ana loda abinci zuwa cikin ramukan da aka yi kuma an rufe fim ɗin saman da ya dace da flange tire .

Ana iya kwatanta kayan a matsayin fim ɗin ƙasa mai PET/PE , fim ɗin { PET/PE PET/PE mai tauri, fim ɗin thermoforming mai haske tire PET/PE ko fim ɗin cike-cika-cika.

PET/PE Fim ɗin Ƙasa na Thermoforming vs. Fim ɗin Lidding

An sanya wannan samfurin a matsayin babban abin da ke samar da zafi mai PET/PE tire kuma kayan da ke samar da zafi mai sauƙi maimakon fim ɗin murfin da aka saba amfani da shi.

Hotunan Fina-finai masu haske PET/PE

Bayanin Fim ɗin Laminated na A PET/PE

Bayanan ƙarshe yakamata su bayyana cikakken tsarin Layer, jimlar kauri, kauri na kowane Layer, haƙurin faɗi, tsawon birgima, diamita na tsakiya, diamita na waje, alkiblar lanƙwasa, ingancin gani, ƙimar shinge da buƙatun rufewa.

PET da Ayyukan Layer na PE

Marufin Hatimin Barewa da Marufin Hatimin Walda

Ana ƙirƙirar aikin bare ko walda ta hanyar cikakken tsarin fakiti. Dole ne a tabbatar da cewa an haɗa yanar gizo ta ƙasa, fim ɗin murfi, yadudduka masu rufewa, flange tire , gurɓatar samfura, zafin jiki, matsin lamba da lokacin zama tare.

Bukatun Aikin Thermoforming

Daidaito tsakanin Dumama

Ya kamata laminate ɗin PET/PE ya yi zafi daidai gwargwado a ko'ina cikin yanar gizo don rage yawan miƙewa, wrinkles da kuma rashin kammalawa.

Zurfin Samarwa da Rabon Zane

Zurfin ramuka, ƙusoshin da suka yi ƙanƙanta da kuma yawan jan abubuwa na iya buƙatar wani kauri mai kauri PET , ingantaccen radius na mold, taimakon toshewa ko samar da matsin lamba.

Rarraba Kauri-Gangara

Kusurwoyi da bangon gefe da aka kafa ya kamata su riƙe isasshen kauri don tsayayya da hudawa, tsagewa da nakasa yayin cikawa da jigilar su.

Mannewa na Layer

Dole ne a ci gaba da haɗa layukan PE da PET yayin dumamawa, shimfiɗawa, gyarawa, rufewa, sanyaya da buɗe fakiti.

Sakin Mold da kuma Rage Mold

Tsarin mold, gogayya ta saman da kuma tsarin tattarawa yana shafar sakin mold ɗin da kuma rabuwar da aka gama tire .

Gyara da Sarrafa tarkace

Ya kamata a gyara laminate ɗin da aka yi da kyau ba tare da burrs masu yawa ba, tsagewa ko ɓarna a gefen da aka yanke.

Tsarin Daidaitacce da Babban Shafi PET/PE

Bukatun OTR, WVTR da MAP

Ya kamata a bayyana aikin shinge ta amfani da ƙimar da aka auna maimakon kwatancen gabaɗaya kamar kyakkyawan shinge ko mafi girma.

Dole ne a bayyana yanayin gwaji, gami da zafin jiki da ɗanɗanon da ya dace, tare da kowace ƙimar shinge.

Amfani da PET/PE Fim ɗin Laminated

• Nama sabo tire : Fakitin da aka tsara da thermoformed don naman sa, naman alade da nama da aka sarrafa.

• Marufin kaji: Tire da fakitin cike fom ɗin da aka rufe don kaji da sauran kaji masu sanyi.

• Kifi da abincin teku: Fakitin da ke buƙatar juriyar danshi, juriyar hudawa da kuma ingancin hatimin.

• Marufin cuku: An yanka, an yayyanka, an toka, an kuma raba kayan cuku.

• Abincin Deli: Nama da aka shirya, salati, kayan abinci masu rage kiba da kuma kayan abinci masu sanyi da aka riga aka shirya.

• Sabbin kayan lambu: 'Ya'yan itace, kayan lambu, namomin kaza da kayan lambu da aka shirya.

• Gidan burodi da kayan zaki: A share tire sannan a nuna marufi don kayayyakin sanyi ko na yanayi.

• Gyaran marufi na yanayi: Tsarin kariya mai ƙarfi wanda aka ƙera don cakuda iskar gas da tsawon lokacin shiryawa.

• Marufi na injin tsotsa: Tsarin fakitin da ke buƙatar hatimi mai ƙarfi da rarraba kayan da aka sarrafa.

Bukatun Sanyi, Daskararre da Zafin Jiki

Ana amfani da PET/PE laminated tire a matsayin abinci mai sanyi da aka zaɓa, amma dole ne a tabbatar da ainihin yanayin zafin sabis don tsarin da aka amince da shi.

Ya kamata a gwada tasirin ƙarancin zafin jiki, tsagewar tire , ƙarfin hatimi, raguwar aiki da kuma raguwar aiki bayan lokacin ajiyar sanyi da ake buƙata.

Bai kamata a bayyana Standard A PET/PE ta atomatik a matsayin wanda ya dace da dumama microwave, tanda na gargajiya, sarrafa retort ko kuma pasteurization mai zafi sosai ba.

Kayayyakin da ke buƙatar juriya ga zafi ya kamata su yi amfani da tsarin da aka tsara musamman kuma aka gwada don zafin jiki, tsawon lokaci da hanyar dumama da aka yi niyya.

Bukatun Hulɗa da Abinci da Dokokin da Aka Doka

Dacewar hulɗa da abinci ya dogara ne da resin PET , resin PE, manne ko layer ɗin ɗaure, ƙarin abubuwa, abubuwan da aka sake yin amfani da su, launuka da tsarin ƙera su.

Masu siye ya kamata su gano ƙasar da za su je, nau'in abincin, zafin jikin da za su yi hulɗa da shi, tsawon lokacin da za su yi hulɗa da shi, yanayin sanyaya abincin da kuma ko abincin mai mai ne, mai tsami, mai giya, mai kitse ko kuma mai ruwa-ruwa.

Takardun da ake da su na iya haɗawa da sanarwar hulɗa da abinci, rahotannin ƙaura gabaɗaya da takamaiman bayanai, sanarwar resin, rahotannin ƙayyadadden abubuwa da takaddun shaida na kula da inganci.

Ya kamata a bayyana rahoton SGS bisa ga ainihin gwajin da aka kammala kuma ba ya tabbatar da bin ƙa'idodi ta atomatik a kowace ƙasa ko aikace-aikacen ba.

RoHS ya shafi takamaiman abubuwan da ke cikin kayan lantarki da na lantarki kuma bai kamata a yi amfani da su azaman babban shaida don amincin hulɗa da abinci ba.

Marufi da Marufi na Likitanci

Aikace-aikacen magunguna da na likitanci suna buƙatar takamaiman matakin PET/PE maimakon takamaiman takamaiman abinci- tire .

Mai siye ya kamata ya gano samfurin da aka shirya, kayan rufewa, hanyar tsaftacewa, buƙatun tsafta, abubuwan da za a iya cirewa, buƙatun ƙaura da kuma ma'aunin tabbatar da fakiti.

Dole ne a tabbatar da cikakken kunshin magani ko magunguna bayan an yi shi, an rufe shi, an yi masa tiyata, an yi masa jigilar kaya, an kuma gwada tsawon lokacin da zai ɗauka.

PET/PE Sake Amfani da Laminate

PET da PE nau'ikan polymer ne daban-daban, don haka bai kamata a kwatanta laminate PET/PE ta atomatik a matsayin kayan aiki ɗaya ko kuma fakitin da za a iya sake amfani da shi a duk duniya ba.

Dacewar sake amfani da na'urori ya dogara da kashi PET , kashi PE, manne, EVOH ko wasu yadudduka masu aiki, launi, lakabi, bugu da tsarin sake amfani da na'urorin da ake amfani da su a kasuwar da ake zuwa.

Mafi yawan tsare-tsare PET tare da yadudduka marasa PET da aka sarrafa da kyau na iya samar da mafi kyawun jituwa tare da tsarin sake amfani da thermoform PET , amma ya kamata a kimanta fakitin da aka kammala bisa ga jagorar ƙira don sake amfani da shi.

Mafi daidaiton da'awa ita ce dole ne a tantance yadda za a sake amfani da kayan aikin ta amfani da cikakken tsarin laminate da kuma kayan aikin tattarawa, rarrabawa da sake amfani da kayan aikin da ake da su a yankin.

Gwaje-gwajen Kula da Inganci da Aka Ba da Shawara

• PET , PE, tabbatar da mannewa da ƙari.

• Jimlar kauri da kauri na kowane Layer.

• Bayanin kauri mai jurewa da kuma juriyar kauri.

• Faɗin birgima, tsawon birgima, nauyin da aka tara da kuma girman da ke cikin takarda.

• Mirgina diamita na waje, alkiblar lanƙwasa da kuma tashin hankali na lanƙwasa.

• Naɗewa da lanƙwasa, na'urar hangen nesa, toshewa da ingancin gefen.

• Watsa haske, hazo, haske, launin fata da lahani na gani.

• PET -ƙarfin haɗin laminate zuwa PE.

• Ragewar gashi bayan an yi shi, an rufe shi, an yi masa sanyi da kuma bare shi.

• Ƙarfin tauri, tsayi, tauri da juriyar tasiri.

• Hudawa da juriyar ƙashi mai kaifi inda ake buƙata.

• Tagar thermoforming, lalacewar yanar gizo da daidaiton dumama.

• Zurfin da kauri na tsari da kuma rarrabawar bango.

• Sakin mold, tarawa da kuma rage aikin mold.

• Gyara da kuma ingancin kayan aiki.

• Zafin fara aiki da taga rufewa.

• Ƙarfin barewa ko ƙarfin hatimin walda.

• Gurɓatar da hatimi, yaɗuwar ruwa da gwajin fashewa.

• Watsawar OTR, WVTR da CO₂ inda aka ƙayyade.

• MAP gwajin riƙe iskar gas inda ake buƙata.

• Gwajin adanawa da sanyi, daskarewa, zubar da ruwa da jigilar kaya.

• Shigewa da fita daga abinci da kuma yin bitar takardu.

• Duba kaya, fakiti da kuma duba kwantena.

Zaɓuɓɓukan Fim ɗin Laminated na Musamman PET/PE

• Jimlar kauri daga kimanin 0.23mm zuwa 0.58mm.

• An keɓance PET da kauri na Layer PE.

• Tsarin PET/PE na yau da kullun da kuma babban shingen PET/EVOH/PE .

• Tsarin Virgin PET da tsarin r PET na musamman ga aikace-aikace.

• Launuka masu haske, shuɗi-mai haske, baƙi, fari da launuka na musamman.

• Faɗin birgima na musamman, tsayi, nauyi da diamita na waje.

• Takardun tsakiya masu inci 3 da inci 6.

• gefen PE ko gefen PE yana juyawa.

• Tsarin marufi masu iya cirewa da kuma rufewa da walda.

• injin tsotsar na'urar injin tsotsar na'urar, MAP da kuma marufin abinci mai sanyi.

• Tallafin daidaita fim ɗin anti-hazo.

• Samfurori don gwaje-gwajen ƙira, rufewa da shinge.

• Lakabin birgima na musamman, kwalaye, pallets da alamun jigilar kaya.

Ana Bukatar Bayanin da ake Bukata don PET/PE Bayanin Fim

• Abinci ko samfuri da aka shirya.

• Tsawon lokacin shiryayye da zafin ajiya da ake buƙata.

• Injin injin tsotsa, iska, MAP ko wani yanayi na marufi.

• Kauri da ake buƙata na fim ɗin gaba ɗaya.

• Ana buƙatar PET , PE da kauri mai shinge.

• Faɗin birgima da kuma jurewar faɗin da ake buƙata.

• Tsawon birgima da ake buƙata, nauyin birgima da kuma matsakaicin diamita na waje.

• Takarda mai inci 3 ko inci 6 a tsakiya.

• Hanyar juyawa ta gefen PE ko kuma hanyar fita ta gefen PE.

• Bayyananne, mai launi ko kuma wanda ba a iya gani.

• Tsarin injin thermoforming da saurin layi.

• Girman mold, zurfin rami da rabon jawowa.

• Zaɓaɓɓen kayan murfin-film da kauri.

• Bukatar da za a iya cirewa ko kuma a yi amfani da shi wajen haɗa hatimin walda.

• Zafin hatimin da ake buƙata, matsin lamba da lokacin zama.

• Ana buƙatar watsa OTR, WVTR ko CO₂.

• Ana buƙatar aikin hudawa, tasiri da kuma zubewa.

• Kasuwar da za a je da kuma takardun da za a iya tuntuɓar abinci.

• Adadin odar farko da kuma ƙimar buƙata ta shekara-shekara.

• Shiryawa, tashar jiragen ruwa da ake zuwa da kuma ranar isarwa da ake buƙata.

Aika Bukatun Fim ɗinka PET/PE

Shiryawa da Isarwa

samfurin marufi: A4 takardar abu s, samfuran da aka yanke da gajerun na'urorin gwaji a cikin jakunkuna masu kariya da kwalaye na jigilar kaya. Ana iya takardar abu

Marufin birgima: Ana iya naɗe birgima PET/PE da fim ɗin PE, kayan da ba sa jure da danshi, takarda kraft da kuma kariyar gefuna.

Kariyar asali: Ana iya kare ƙwallan takarda da ƙarshen birgima don rage niƙa, gurɓatawa da lalacewar gefen.

Marufin fale-falen: Loda fale-falen da aka ambata yana da nauyin 500-2000kg dangane da girman birgima da buƙatun sarrafawa.

Lodawa a cikin kwantena: Lodawa ta hanyar amfani da na'urar aunawa tana da kimanin tan 20, tana da alaƙa da diamita na birgima, tsarin fakiti, girman kwantena da iyakokin nauyin doka.

Jigilar samfura: Ana iya aika samfuran ta hanyar DHL, FedEx, U PS , TNT ko wani mai aika saƙo da aka amince da shi.

Lokacin samar da kayayyaki: Tsarin samar da kayayyaki na yau da kullun yana buƙatar kimanin kwanaki 10-14 na aiki bayan ƙayyadewa, samfuri, marufi da tabbatar da biyan kuɗi.

PET Takardar Bayanan Fasaha

Bayanan PET da ke akwai takardar abu an ajiye su a ƙasa don amfani na gaba ɗaya.

Kafin amfani da shi don siye ko dalilai na ƙa'ida, tabbatar da cewa matakin kayan, matakin PET , matakin PE, manne, kauri, wurin ƙera da ranar fitarwa sun shafi ainihin laminate ɗin PET/PE da ake bayarwa.

   Sauke Takardar Bayanai PET

Takaddun shaida da Takardun Gwaji

Takardun da ake da su na iya haɗawa da takamaiman bayanai game da samfura, sanarwar hulɗa da abinci, rahotannin ƙaura, rahotannin ƙayyadadden abubuwa, rahotannin gwajin shinge da takaddun shaida na kula da inganci.

Ya kamata a tabbatar da kowace takarda bisa ga ainihin PET resin, resin PE, manne, abubuwan da aka sake yin amfani da su, kauri gabaɗaya, tsarin Layer da wurin ƙera su.

Ya kamata a bayyana rahotannin SGS, RoHS da REACH bisa ga ainihin iyakokin gwajinsu maimakon a ɗauke su a matsayin takaddun shaida na hulɗa da abinci da za a iya musanyawa.

Me Yasa Za Ka Zabi HSQY A Matsayin Mai Samar Da Fina-finai PET/PE ?

• PET/PE gidan yanar gizo na thermoforming don abinci tire .

• Jimlar kauri daga kimanin 0.23mm zuwa 0.58mm.

• Tsarin PET da kuma tsarin PE da aka keɓance.

• Tsarin da aka tsara a sarari, masu launi da kuma takamaiman aikace-aikace.

• Zaɓuɓɓukan marufi na yau da kullun da na babban shinge.

• Tallafin haɓaka fakitin da za a iya cirewa da kuma rufewa da walda.

• ƙwallan birgima masu inci 3 da inci 6.

• Faɗin birgima na musamman, tsayi, nauyi da kuma alkiblar juyawa.

• Samfura don thermoforming, sealing da kimanta shinge.

• Tallafin takardar hulɗa da abinci bisa ga matakin da aka zaɓa.

• Duba inganci bisa ga ƙa'idodin da aka amince da su.

• Shirya kayan fitarwa da tallafin jigilar kaya na ƙasashen waje.

Kafin a samar da adadi mai yawa, HSQY ya ba da shawarar a gwada fim ɗin PET/PE da aka zaɓa a kan ainihin injin thermoforming na abokin ciniki, mold, layin cikawa, fim ɗin rufewa da kayan aikin rufewa tire .

Tuntuɓi HSQY don Samfura da Farashi

Tambayoyin da Ake Yawan Yi Game da PET/PE Fim ɗin Laminated

Menene fim ɗin da aka yi wa laminated PET/PE ?

Kayan aiki ne mai layuka da yawa wanda ya haɗa da tsarin PET Layer tare da PE sealing Layer don thermoformed tire da aikace-aikacen marufi na abinci.

Shin wannan gidan yanar gizo ne na ƙasa ko fim ɗin rufewa?

Wannan samfurin galibi wani yanki ne mai kama da na ƙasa mai kama da thermoforming wanda ake amfani da shi don ƙirƙirar ramukan tire ko ƙananan ramuka.

Menene bambanci tsakanin shafin yanar gizo na ƙasa da fim ɗin lidding?

An yi amfani da layin ƙasan thermoform cikin tire , yayin da siririn fim ɗin murfin ke rufe fakitin da aka cika.

Wadanne kauri ake samu?

Jerin samfuran da ake amfani da su a yanzu yana da kauri kusan 0.23-0.58mm.

Shin Layer ɗin PE koyaushe yana da 50µm?

Kimanin 50µm tsari ne na tunani. Ana iya daidaita kauri na PE bisa ga buƙatun hatimi da aikace-aikace.

Me matakin PET yake yi?

PET yana samar da bayyananne, tauri, daidaiton girma da tallafi yayin aikin thermoforming.

Menene aikin Layer na PE?

PE yana samar da saman rufe zafi, juriya ga danshi da ƙarin tauri.

Za a iya yin fim ɗin PET/PE mai siffar zafi?

Eh. An amince da matakin thermoforming ko matsin lamba da aka samar a cikin fakitin tire da na ƙasa.

Shin fim ɗin ya dace da injunan cike fom-cika-hatimi?

Ana iya ƙera shi don kayan aikin cike fom-cika bayan an tabbatar da injin, faɗi, zurfin tsari, diamita na birgima da tsarin rufewa.

Wadanne ƙwayayen roll ne ake samu?

Zaɓuɓɓukan da aka saba amfani da su sun haɗa da ƙwallan takarda masu inci 3 da inci 6.

Za a iya keɓance faɗin birgima?

Eh. Ana iya keɓance faɗin birgima bisa ga tsarin injin da ƙirar.

Menene ma'anar ɓangaren PE ko ɓangaren PE?

Yana bayyana ko layin rufewar PE yana fuskantar ciki ko wajen naɗin rauni. Alkiblar da ta dace ta dogara ne da injin marufi.

Menene fakitin PET/PE mai iya barewa?

Kunshin fakiti ne da aka ƙera don kiyaye amincin hatimi yayin rarrabawa yayin da ake barin babban fim ɗin ya bare daga tire da ƙarfi mai sarrafawa.

Menene kunshin hatimin walda?

Yana amfani da hatimin da ya fi ƙarfi wanda aka tsara don aikace-aikacen da ke buƙatar babban tsaro na hatimi, juriya ga zubewa ko shaidar ɓarna.

Shin ƙasan yanar gizo kaɗai ke tantance ƙarfin barewa?

A'a. Ƙarfin barewa ya dogara da layin ƙasa, fim ɗin rufewa, yadudduka na rufewa, zafin jiki, matsin lamba, lokacin zama da yanayin flange.

Shin misali PET/PE fim ne mai hana iskar oxygen?

Ba ta atomatik ba. Ya kamata a tabbatar da ingancin shingen iskar oxygen ta amfani da ƙimar OTR don ainihin tsarin laminate.

Yaushe ake buƙatar PET/EVOH/PE ?

Ana iya buƙatar Layer na shinge na EVOH don abinci mai saurin kamuwa da iskar oxygen, tsawon lokacin shiryawa da kuma marufi na yanayi da aka gyara.

Za a iya amfani da fim ɗin don marufi na MAP ?

Eh, lokacin da aka tsara kuma aka tabbatar da tsarin, OTR, watsawar CO₂, tsarin rufewa da haɗin iskar gas don samfurin.

Za PET/PE iya sanya nama sabo a cikin jaka?

Eh. Ya kamata a zaɓi shingen da ake buƙata, huda, rufewa da kuma halayen MAP bisa ga samfurin nama da kuma abin da ake son adanawa.

Za a iya haɗa kifi da abincin teku?

Eh. Ya kamata a tabbatar da buƙatar danshi, hudawa, zubewa, ajiyar sanyi da kuma hana wari.

Za a iya sanya cuku a cikin kwali?

Eh. Ya kamata a daidaita shinge da yaduwar CO₂ da nau'in cuku da kuma ko zai ci gaba da girma a cikin kunshin.

Shin fim ɗin PET/PE ya dace da abincin daskararre?

Ana iya amfani da matakin da ya dace bayan an gwada tasirin ƙarancin zafin jiki, hatimi, cirewa da kuma rage gudu.

Za a iya saka PET/PE tire a cikin microwave?

Bai kamata a ɗauka cewa marufi na Standard A PET/PE ba shi da illa ga microwave. Ana buƙatar tsarin da gwajin amfani da shi wanda ba shi da zafi.

Shin abincin fim PET/PE lafiya ne?

Dole ne a tabbatar da dacewa da hulɗar abinci da abinci don ainihin PET , PE, manne, ƙari, nau'in abinci, zafin jiki da kasuwar da za a je.

Shin rahoton SGS ya tabbatar da bin ƙa'idodin hulɗa da abinci?

Rahoton da ya shafi ainihin samfurin, hanyar gwaji da iyakokin da suka dace ne kawai zai iya tallafawa takamaiman bayanin bin ƙa'ida.

Shin RoHS ta tabbatar da cewa marufi yana da aminci ga abinci?

A'a. RoHS galibi yana magance abubuwa masu haɗari a cikin kayan lantarki da na lantarki kuma ba madadin gwajin hulɗa da abinci bane.

Za a iya amfani da sake yin amfani da PET ?

Ana iya kimanta tsarin r PET na musamman bisa ga kaso mai sake yin amfani da shi, shinge mai tasiri da buƙatun hulɗa da abinci a kasuwar da za a je.

Shin ana iya sake yin amfani da fim ɗin da aka yi wa laminate PET/PE ?

Amfani da sake amfani da shi ya dogara ne da cikakken tsarin laminate da tsarin tattarawa, rarrabawa da sake amfani da shi da ake da shi a kasuwar da ake zuwa.

Menene mafi ƙarancin adadin oda?

Matsakaicin MOQ shine kimanin 1000kg. Tsarin musamman, launuka da matakan shinge na musamman na iya buƙatar adadi daban-daban.

Ana samun samfuran?

Ana iya samun A4 takardar abu s, guntu-guntu da aka yanke ko na'urorin gwaji masu iyaka don ƙirƙirar, rufewa da kimanta shinge.

Menene lokacin samar da jagora?

Tsarin samarwa na yau da kullun yana buƙatar kimanin kwanaki 10-14 na aiki bayan ƙayyadewa, samfuri, marufi da tabbatar da biyan kuɗi.

Wane bayani ake buƙata don yin ƙiyasin farashi?

Samar da samfurin, tsawon lokacin shiryawa, kauri gabaɗaya, tsarin Layer, faɗi, girman birgima, zurfin tsari, fim ɗin murfin, nau'in hatimi, manufa ta shinge, adadi da inda za a nufa.

Sami Bayanin Fim na Musamman PET/PE

Game da Ƙungiyar Roba ta HSQY

HSQY Plastic Group tana samar da fina-finan PET/PE masu laminated, fina-finan shinge, { PET/EVOH/PE PET abinci tire , CPET tire , fina-finan rufewa, PET takardar abu s, PVC takardar abu s da kayan shirya abinci na musamman ga abokan cinikin B2B na ƙasashen duniya.

HSQY tana tallafawa kamfanonin samar da thermoforming, masu sarrafa nama, masu tattara abincin teku, masu kera cuku, masu sauya fakitin abinci, masu shigo da kaya da masu rarrabawa tare da zaɓin kayan aiki, gwajin samfura, samarwa na musamman, duba inganci da kuma marufi na fitarwa.

Nemi faɗar farashin da Samfura

Nunin Marufi na HSQY