Transparent Petee Plastic PET / PE Laminated Film Ma Plastic Aduan Tray

Transparent PET / PE Laminated Film ma Aduan Trays

HSQY yɛ PET/PE laminated film a ɛda adi pefee ma thermoformed aduan trays, form-fill-seal packaging, nam trays, mpataa trays, nkokɔ packs, cheese packaging, deli products ne nnuan trays afoforo a wɔayɛ no nwini.

Adeɛ no yɛ semi-rigid thermoformable ase web a ɛyɛ APET structure layer a wɔaka abom ne PE sealing layer. PET layer no ma transparency, rigidity ne forming support, bere a PE layer no ma ɔhyew-sealing dwumadie ne nsuo a ɛko tia.

Aduru a wɔada no adi no wɔ hɔ wɔ ne nyinaa mu duru fi bɛyɛ 0.23mm kosi 0.58mm. Nkyerɛkyerɛmu adansi de bɛyɛ 50μm PE nsɔano layer di dwuma, bere a PET kɛse, PE kɛse ne laminate nhyehyɛe nyinaa betumi ayɛ nea wɔpɛ sɛnea tray nhyehyɛe ne packaging line.

Wobetumi de nhoma mmobɔwee a emu da hɔ ama wɔ krataa a ne kɛse yɛ nsateakwaa 3 anaa nsateakwaa 6 so a wɔayɛ nhoma mmobɔwee trɛw, nhoma mmobɔwee tenten, nhoma mmobɔwee mu duru, akyi ntwemu ne kwan a wɔfa so twitwiw.

Wobetumi ayɛ peelable ne weld-seal packaging options sɛnea wɔapaw lidding film, sealing ɔhyew, tra bere, nhyɛso, tray-flange nhyehyɛe ne ahwehwɛde bue tumi.

Standard PET / PE ma pefee nkyerɛkyerɛmu, thermoformability ne ahotoso sealing. Ɛsɛ sɛ nneɛma a ɛhia sɛ wɔde sie kyɛ, wim nneɛma a wɔayɛ mu nsakraeɛ anaa oxygen akwansideɛ a ɛkorɔn a wɔakyerɛ sɛ wɔde nhyehyɛeɛ a ɛwɔ OTR ne WVTR gyinapɛn a wɔagye atom, te sɛ PET/EVOH/PE wɔ baabi a ɛfata di dwuma.

Hwehwɛ mu HSQY PET / PE lamination sini ahorow a ɛwɔ hɔ, PET/PE aduan a wɔde kyekyere nneɛma trays ne PET/EVOH/PE trays a ɛwɔ akwanside kɛse.

Bisa PET/PE Film Bo a Wɔbɔ    Bisa Forming ne Sealing Samples

PET/PE Laminated Sini Video a Wɔde Ayɛ Sini

Hwɛ video a ɛwɔ aseɛ ha no na sua pii fa HSQY PET/PE laminated film, thermoforming applications, roll formats ne customized food-packaging solutions ho.

Dɛn Ne PET/PE Laminated Film?

PET/PE laminated film yɛ ade a wɔde kyekyere nneɛma pii a ɛka polyethylene terephthalate a ɛyɛ den anaa nea ɛyɛ den fã ne polyethylene a wɔde kata so bom.

APET de nhyehyɛe titiriw, stiffness, transparency ne thermoforming mmoa ma. PE ma aduane a ɛne no di nkitaho a wotumi seal, nsuo a ɛko tia ne toughness foforɔ.

Bere a wɔreyɛ thermoforming no, wɔtwe laminate a wɔayɛ no hyew no kɔ abura mu de yɛ tray anaasɛ bottom packs. Afei wɔde aduan gu abura a wɔayɛ no mu na wɔde sini a ɛwɔ soro a ɛne no hyia gu tray flange no so.

Wobetumi nso akyerɛkyerɛ ade no mu sɛ APET/PE ase wɛb, PET/PE sini a ɛyɛ den, PET/PE thermoforming roll, tray-forming film a emu da hɔ anaa PET/PE form-fill-seal film.

PET/PE Thermoforming Bottom Film vs. Sini a Wɔde Kata So

Wɔde saa ade yi si hɔ titiriw sɛ PET/PE ase wɛb a wotumi yɛ hyew anaasɛ tray-forming ade sen sɛ wɔde bɛhyɛ nea wɔtaa de di dwuma a ɛyɛ mmerɛw a wɔde kata so.

PET/PE Film Mfonini ahorow a ɛda adi pefee

APET/PE Laminated Film Nsɛm a Wɔakyerɛkyerɛ Mu

Ɛsɛ sɛ nkyerɛkyerɛmu a etwa to no ka layer nhyehyɛe a edi mũ, ne nyinaa kɛse, ankorankoro layer thicknesses, trɛw tolerance, roll tenten, core diameter, abɔnten diameter, winding akwankyerɛ, optical su, akwanside bo ne sealing ahwehwɛde.

PET ne PE Layer Dwumadie

Peel Nsɔano vs. Weld Nsɔano Nneɛma a Wɔde Gu Mu

Peel anaa weld adwumayɛ yɛ nea wɔbɔ denam package nhyehyɛe a edi mũ no so. Ɛsɛ sɛ wɔbom di ase wɛb, lidding film, sealant layers, tray flange, product efĩ, ɔhyew, nhyɛso ne bere a ɛtra hɔ no ho adanse.

Thermoforming Adwumayɛ ho Ahwehwɛde

Ɔhyew a Ɛyɛ Pɛpɛɛpɛ

Ɛsɛ sɛ PET/PE laminate no yɛ hyew pɛpɛɛpɛ wɔ wɛb no so na ama mpɔtam hɔ a ɛtrɛw dodo, nwi ne nwene a enni mũ no so tew.

Forming Depth ne Draw Ratio a Wɔde Yɛ Adwuma

Ebia abura a emu dɔ, ntwea teateaa ne draw ratios a ɛkorɔn betumi ahwehwɛ sɛ wɔde PET layer a ɛyɛ den, mold radii a wɔayɛ no yiye, plug mmoa anaa nhyɛso a wɔyɛ.

Ɔfasu-Aduru a Wɔkyekyɛ

Ɛsɛ sɛ ntwea ne nkyɛnkyɛn a wɔayɛ no kura mu duru a ɛdɔɔso a ɛbɛma wɔatumi ako atia ntokuru, mpaapaemu ne deformation bere a wɔde ahyɛ mu ma na wɔde rekɔ no.

Layer Adhesion a Wɔde Bata Ho

Ɛsɛ sɛ PET ne PE layers kɔ so bom bere a wɔreyɛ hyew, wɔretrɛw mu, wɔretwitwa, wɔresɔw ano, wɔrebɔ nwini na wɔrebue nneɛma a wɔde ahyɛ mu no.

Mould Release ne Densting a Wɔde Ma

Mold draft, surface friction ne stacking geometry ka release fi mold ne mpaapaemu a wɔawie trays.

Trimming ne Scrap a Wɔde Di Dwuma

Ɛsɛ sɛ laminate a wɔayɛ no twitwa no yiye a enni burrs dodo, mpaapaemu a wontumi nni so anaasɛ delamination wɔ ano a wɔatwa no.

Standard ne High-Barrier PET/PE Nhyehyɛe ahorow

OTR, WVTR ne MAP Ahwehwɛdeɛ

Ɛsɛ sɛ wɔde gyinapɛn ahorow a wɔasusuw na ɛda akwanside adwumayɛ adi sen sɛ wɔde nkyerɛkyerɛmu a ɛkɔ akyiri te sɛ akwanside a ɛkyɛn so anaasɛ ɛkorɔn.

Ɛsɛ sɛ wɔka sɔhwɛ tebea horow, a ɔhyew ne ɔhyew a ɛwɔ hɔ ka ho, ka akwanside bo biara ho.

PET/PE Laminated Film a wɔde di dwuma

• Nam trays a wɔayɛ no foforo: Fa thermoformed packs a emu da hɔ ma nantwinam, mprako nam ne nam a wɔayɛ ho adwuma.

• Nkokoaa a wɔde kyekyere nneɛma: Trays ne form-fill-seal packs a wɔde yɛ akokɔ ne nkokɔ afoforo a wɔayam no nwini.

• Mpataa ne ɛpo mu nnuan: Packs a emu da hɔ a ɛhwehwɛ sɛ ɛko tia nsuo, ɛko tia tokuru ne seal integrity.

• Cheese a wɔde kyekyere nneɛma: Cheese nneɛma a wɔatwitwa, wɔayam, asiw ano na wɔakyekyɛ mu.

• Deli nnuan: Nam a wɔasiesie, salad, antipasti ne nneɛma a wɔasiesie sɛ wobedi a ɛyɛ nwini.

• Nneɛma a wɔayɛ no foforo: Nnuaba, nhabannuru, nsenia ne nneɛma a wɔasiesie.

• Bakery ne confectionery: Tew tray ahorow mu na fa nneɛma a wɔde kyekyere nneɛma a wɔayɛ no nwini anaa nea atwa ho ahyia no kyerɛ.

• Wim tebea mu nneɛma a wɔayɛ mu nsakrae: Wɔyɛɛ adan a akwanside kɛse wom ama gas a wɔde afra a wɔhwehwɛ ne bere a wɔde bɛkora so.

• Vacuum packaging: Pack designs a ɛhwehwɛ sɛ wɔde nsɔano a emu yɛ den ne nneɛma kyekyɛ a wɔahyɛ so.

Chilled, Frozen ne Ɔhyew a Wɔhwehwɛ

Wɔtaa yɛ PET/PE laminated trays ma nnuan a wɔayɛ no nwini ne nea wɔapaw a wɔahyɛ no nwini, nanso ɛsɛ sɛ wogye ɔsom-ɔhyew pɔtee no tom ma nhyehyɛe a wɔapene so no.

Ɛsɛ sɛ wɔsɔ ɔhyew a ɛba fam nkɛntɛnso, tray a ɛpaapae, nsɔano ahoɔden, delamination ne drop adwumayɛ hwɛ wɔ bere a wɔhwehwɛ sɛ wɔde sie awɔw mu no akyi.

Ɛnsɛ sɛ wɔka standard APET/PE ho asɛm ara kwa sɛ ɛfata ma microwave ɔhyew, fononoo a wɔtaa de di dwuma, retort processing anaa pasteurization a ɛyɛ hyew kɛse.

Ɛsɛ sɛ nneɛma a ɛhia sɛ ɛko tia ɔhyew di dwuma de nhyehyɛe a wɔayɛ pɔtee na wɔasɔ ahwɛ wɔ ɔhyew, bere tenten ne ɔhyew kwan a wɔahyɛ da ayɛ no ho.

Aduan-Nkitahodi ne Mmara mu Ahwehwɛde ahorow

Aduan a wɔde di nkitaho a ɛfata no gyina PET resin, PE resin, adhesive anaa tie layer, additives, nneɛma a wɔasan de adi dwuma, colorants ne manufacturing process so.

Ɛsɛ sɛ adetɔfoɔ kyerɛ ɔman a wɔrekɔ, aduane ko, ɔhyew a wɔde di nkitaho, bere tenten a wɔde di nkitaho, tebea a ɛwɔ frigye mu ne sɛ ebia aduan no yɛ srade, asikre, nsa, nufusu anaa nsu.

Nwoma a ɛwɔ hɔ no betumi ayɛ aduane a wɔde di nkitaho ho mpaemuka, atutena ho amanneɛbɔ a ɛfa ne nyinaa ne nea ɛyɛ pɔtee, resin mpaemuka, nnuru a wɔabara ho amanneɛbɔ ne adansedie a ɛfa nneɛma a ɛyɛ papa ho.

Ɛsɛ sɛ wɔkyerɛkyerɛ SGS amanneɛbɔ mu sɛdeɛ sɔhwɛ pɔtee a wɔawie no teɛ na ɛnkyerɛ sɛ wɔdi mmara so wɔ ɔman anaa akwammisa biara mu.

RoHS fa nneɛma a wɔabara wɔ anyinam ahoɔden ne ɛlɛtrɔnik mfiri mu ho titiriw na ɛnsɛ sɛ wɔde di dwuma sɛ adanse titiriw a ɛkyerɛ sɛ aduan a wɔde di nkitaho no ahobammɔ.

Nnuru ne Aduruyɛ mu Nneɛma a Wɔde Gu Nneɛma Mu

Nnuru ne aduruyɛ mu dwumadie hwehwɛ sɛ wɔde PET/PE grade a wɔahyɛ so wɔ ɔkwan soronko so mmom sen sɛ wɔbɛkyerɛkyerɛ aduane-tray mu wɔ ɔkwan a ɛkɔ akyiri so.

Ɛsɛ sɛ adetɔfoɔ no hunu adeɛ a wɔakyekyere, nneɛma a wɔde ahyɛ mu, ɔkwan a wɔfa so de sterilization, ahotew ho ahwehwɛdeɛ, extractables, migration requirements ne package-validation standard.

Ɛsɛ sɛ wɔgye aduruyɛ anaa nnuru a wɔde ahyɛ mu no nyinaa di dwuma wɔ bere a wɔayɛ, asɔ ano, ayɛ no sterilization, de akɔ ne bere a wɔde sie ho sɔhwɛ awie no.

PET/PE Laminate a Wɔsan De Di Dwuma

PET ne PE yɛ polymer mmusua ahorow, enti ɛnsɛ sɛ wɔka PET/PE laminate ho asɛm ara kwa sɛ mono-material anaasɛ amansan nyinaa recyclable package.

Nneɛma a wɔsan de di dwuma a ɛne ne ho hyia no gyina PET ɔha biara mu nkyem, PE ɔha biara mu nkyem, ade a wɔde nkata so, EVOH anaa nneɛma afoforo a ɛyɛ adwuma, kɔla, nkyerɛwde, tintim ne nneɛma a wɔsan de di dwuma nhyehyɛe a wɔde di dwuma wɔ gua a wɔde rekɔ no so.

PET nhyehyeɛ titire a ɛwɔ ahwɛyie a wɔhwɛ so a ɛnyɛ PET layers no betumi ama ɛne PET thermoform recycling systems ahyia yie, nanso ɛsɛ sɛ wɔsɔ package a wɔawie no hwɛ de gyina akwankyerɛ a ɛfata a ɛfa design-for-recycling ho.

Asɛm a ɛyɛ nokware paa ne sɛ ɛsɛ sɛ wɔde laminate nhyehyɛe a edi mũ ne nneɛma a wɔboaboa ano, hyehyɛ na wɔsan de di dwuma a ɛwɔ mpɔtam hɔ no na ɛhwɛ sɛnea wobetumi asan de adi dwuma bio.

Sɔhwɛ ahorow a Wɔkamfo Kyerɛ a Wɔde Hwɛ Nneɛma a Ɛyɛ Paara So

• PET, PE, adhesive ne additive nokwaredi.

• Total thickness ne ankorankoro layer thicknesses.

• Transverse thickness profile ne thickness tolerance.

• Roll trɛw, roll tenten, net mu duru ne krataa-core nsusuwii.

• Roll abɔnten diameter, winding akwankyerɛ ne winding nhyɛso.

• Roll flatness, telescoping, siw ne ano su.

• Hann a ɛkɔ, ahum, emu da hɔ, tint ne aniwa mu sintɔ ahorow.

• PET-to-PE laminate nkitahodi ahoɔden.

• Delamination akyi ayɛ, sealing, awɔw ne peeling.

• Tensile ahoɔden, elongation, stiffness ne impact resistance.

• Puncture ne sharp-bone resistance wɔ baabi a ɛho hia.

• Thermoforming mfɛnsere, wɛb sag ne ɔhyew biakoyɛ.

• Forming bun ne ɔfasu-thickness kyekyɛ.

• Mould release, stacking ne densting adwumayɛ.

• Trimming ne cut-edge su a ɛyɛ fɛ.

• Seal mfiase ɔhyew ne seal mfɛnsere.

• Peel ahoɔden anaa weld-seal ahoɔden.

• Seal efĩ, leakage ne burst sɔhwɛ.

• OTR, WVTR ne CO2 a wɔde fa baabi a wɔakyerɛ.

• MAP gas-retention sɔhwɛ wɔ baabi a ɛho hia.

• Cold-storage, freezing, drop ne akwantuo sɔhwɛ.

• Aduan a wɔde di nkitaho atutra ne nkrataa mu nhwehwɛmu.

• Packing, pallet ne container-loading nhwehwɛmu.

Amanneɛbɔ PET / PE Laminated Film Options

• Ne nyinaa mu duru firi bɛyɛ 0.23mm kɔsi 0.58mm.

• PET ne PE layer a wɔayɛ no sɛnea wɔpɛ.

• Standard PET / PE ne akwanside kɛse PET / EVOH / PE nhyehyɛe.

• Virgin PET ne application-specific rPET nhyehyɛe ahorow.

• Kɔla ahorow a emu da hɔ, bruu a ɛyɛ hann, tuntum, fitaa ne amanne kwan so kɔla ahorow.

• Customized roll trɛw, tenten, mu duru ne abɔnten diameter.

• Krataa a ɛyɛ nsateakwaa 3 ne nsateakwaa 6.

• PE afã kɔ mu anaa PE fã fi akyi winding.

• Peelable ne weld-seal packaging nhyehyɛe ahorow.

• Vacuum, MAP ne aduan a wɔayɛ no nwini a wɔde kyekyere nneɛma ho grades.

• Anti-fog top-film a ɛne ne ho hyia mmoa.

• Nhwɛsoɔ a wɔde yɛ, nsɔano ne akwansideɛ sɔhwɛ.

• Customized roll labels, cartons, pallets ne po so hyɛn agyiraehyɛde.

Nsɛm a Ɛho Hia ma PET/PE Film Quote

• Aduan anaa ade a wɔakyekyere.

• Nkwa nna a wɔhwehwɛ ne ɔhyew a wɔde sie.

• Vacuum, mframa, MAP anaa nneɛma foforo a wɔde kyekyere nneɛma ho wim tebea.

• Ɛhwehwɛ sɛ film no mu duru nyinaa yɛ kɛse.

• PET, PE ne akwanside-layer a ɛyɛ den a wɔhwehwɛ.

• Wɔhwehwɛ sɛ wɔde roll trɛw ne ne trɛw tolerance.

• Ahwehwɛde roll tenten, roll mu duru ne maximum abɔnten diameter.

• Krataa a ne kɛse yɛ nsateakwaa 3 anaa nsateakwaa 6.

• PE afã wɔ anaa PE fã fi winding kwankyerɛ.

• Hwɛ a emu da hɔ, kɔla anaa opaque.

• Thermoforming-afiri nhwɛso ne line ahoɔhare.

• Mould dimensions, cavity bun ne twetwe ratio.

• Wɔapaw lidding-film nneɛma ne ne kɛse.

• Peelable anaa weld-seal ahwehwɛde.

• Nsɔano hyew, nhyɛso ne bere a ɛtra hɔ a wɔhwehwɛ.

• OTR, WVTR anaa CO2 a wɔhwehwɛ.

• Ɛhwehwɛ sɛ wɔyɛ puncture, impact ne leak adwumayɛ.

• Destination market ne aduan a wɔde di nkitaho ho nkrataa.

• Mfiase no dodow a wɔkra ne afe afe ahwehwɛde a wɔasusuw ho.

• Packing, destination port ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

Fa Wo PET/PE Film Ahwehwɛde ahorow no mena

Nneɛma a Wɔde Gu Mu ne Nea Wɔde Kɔma

Nhwɛsoɔ a wɔde gu mu: Wobetumi de A4 nkrataa, nhwɛsoɔ a wɔatwa ne sɔhwɛ nwoma ntiantiaa ahyɛ nkotokuo a ɛbɔ ho ban ne nnaka a wɔde kɔma nkurɔfoɔ mu.

Roll packing: PET / PE rolls betumi abɔ PE film, nsu-resistant ade, kraft krataa ne ano ahobammɔ.

Core ahobanbɔ: Wobetumi abɔ krataa cores ne roll ends ho ban de atew abubu, efĩ ne anoano asɛe so.

Pallet packing: Reference pallet loading yɛ bɛyɛ 500-2000kg a egyina roll dimensions ne handling ahwehwɛde so.

Container loading: Reference loading yɛ bɛyɛ tɔn 20, ɛgyina roll diameter, pallet nhyehyeɛ, container volume ne mmara kwan so mu duru anohyeto so.

Nhwɛsode a wɔde mena: Wobetumi de nhwɛsode amena denam DHL, FedEx, UPS, TNT anaa obi foforo a wɔapene so sɛ wɔde bɛmena.

Production lead time: Standard production taa hwehwɛ bɛyɛ adwuma nnafua 10-14 wɔ specification, sample, packaging ne payment confirmation akyi.

PET Mfiridwuma ho Nsɛm Krataa

Wɔde PET data krataa a ɛwɔ hɔ no asie wɔ aseɛ ha sɛdeɛ ɛbɛyɛ a wɔbɛhwɛ mu nyinaa.

Ansa na wode bedi dwuma de atɔ anaa mmarahyɛ atirimpɔw ahorow no, si so dua sɛ nneɛma no grade, PET layer, PE layer, adhesive, thickness, manufacturing site ne da a wɔde mae no fa PET/PE laminate pɔtee a wɔde rema no ho.

   Twe PET Data Krataa no

Adansedi nkrataa ne Sɔhwɛ Nwoma

Nwoma a ɛwɔ hɔ no betumi ayɛ nneɛma no ho nsɛm, aduane a wɔde di nkitaho ho mpaemuka, atutena ho amanneɛbɔ, nneɛma a wɔabara ho amanneɛbɔ, akwansideɛ sɔhwɛ amanneɛbɔ ne adansedie a ɛkyerɛ sɛnea wɔhwɛ nneɛma a ɛyɛ papa so.

Ɛsɛ sɛ wɔde PET resin, PE resin, adhesive, nneɛma a wɔasan de adi dwuma, ne nyinaa mu duru, layer structure ne beae a wɔyɛ no di adanseɛ sɛ krataa biara te.

Ɛsɛ sɛ wɔkyerɛkyerɛ SGS, RoHS ne REACH amanneɛbɔ mu sɛnea wɔn sɔhwɛ no kɛse te sen sɛ wɔbɛfa no sɛ aduan a wɔde di nkitaho ho adansedi nkrataa a wotumi sesa.

Dɛn Nti na Wopaw HSQY sɛ Wo PET/PE Film Supplier?

• PET/PE thermoforming ase web ma aduan trays.

• Ne nyinaa mu duru firi bɛyɛ 0.23mm kɔsi 0.58mm.

• PET ne PE layer adansi a wɔayɛ no sɛnea wɔpɛ.

• Nneɛma a emu da hɔ, kɔla ne dwumadie pɔtee bi.

• Standard ne akwanside kɛse a wɔde kyekyere nneɛma a wɔpaw.

• Peelable ne weld-seal package-nkɔso mmoa.

• 3-inch ne 6-inch roll cores.

• Customized roll trɛw, tenten, mu duru ne winding akwankyerɛ.

• Nhwɛsode a wɔde yɛ thermoforming, sealing ne akwanside nhwehwɛmu.

• Aduan-nkitahodi nkrataa mmoa a egyina abasobɔde a wɔapaw no so.

• Nhwehwɛmu a wɔyɛ wɔ nneɛma pa ho a wɔde tia nsɛm a wɔapene so.

• Export packing ne amanaman ntam po so hyɛn mmoa.

Ansa na wɔbɛyɛ no pii no, HSQY kamfo kyerɛ sɛ wɔnsɔ PET/PE sini a wɔapaw no nhwɛ wɔ adetɔfo no afiri a ɛma ɔhyew ankasa, nkuku, nhama a wɔde hyɛ mu, sini a wɔde kata so ne mfiri a wɔde siw tray ano no so.

Di HSQY nkitaho na woanya Nhwɛsode ne Bo

Nsɛm a Wɔtaa Bisa Fa PET/PE Laminated Film Ho

Dɛn ne PET/PE laminated sini?

Ɛyɛ multilayer ade a ɛka PET structure layer ne PE sealing layer bom ma thermoformed trays ne aduan-packaging applications.

So eyi yɛ ase ntaban anaasɛ sini a wɔde kata so?

Saa ade yi yɛ semi-rigid thermoforming bottom web titiriw a wɔde yɛ trays anaasɛ package cavities a ɛwɔ fam.

Nsonsonoe bɛn na ɛda bottom web ne lidding film ntam?

Wɔde thermoformed a ɛwɔ ase ntaban no mu kɔ tray no mu, bere a nea ɛyɛ tratraa a wɔde kata so no siw ade a wɔahyɛ no ma no so.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Mprempren nneɛma a wɔde yɛ no bɛyɛ 0.23-0.58mm wɔ ne nyinaa mu duru mu.

So PE layer no yɛ 50μm bere nyinaa?

Bɛyɛ 50μm yɛ nhwɛsode nhyehyɛe. Wobetumi asiesie PE no kɛse sɛnea nsɔano ne nea wɔde di dwuma ahwehwɛde ahorow te.

Dɛn na PET layer no yɛ?

PET ma transparency, rigidity, dimensional stability ne mmoa bere a thermoforming.

Dɛn na PE layer no yɛ?

PE ma ɔhyew-sealing soro, nsu a ɛko tia ne toughness foforo.

So wobetumi ayɛ PET/PE sini no thermoformed?

Aane. Wobetumi de vacuum anaa pressure ayɛ thermoforming grade a wɔapene so ayɛ no trays ne bottom packages.

So sini no fata ma mfiri a wɔde hyɛ krataa a wɔde hyɛ mu ma?

Wobetumi ayɛ no ama form-fill-seal mfiri akyi afiri no, ne tɛtrɛtɛ, forming bun, roll diameter ne lidding nhyehyɛe no asi so dua.

Roll cores bɛn na ɛwɔ hɔ?

Standard options bi ne krataa a ɛyɛ nsateakwaa 3 ne nsateakwaa 6.

So wobetumi ayɛ nhoma mmobɔwee no trɛw sɛnea wɔpɛ?

Aane. Wobetumi ayɛ roll trɛw sɛnea afiri no ne nkuku nhyehyɛe te.

Dɛn na PE side in anaa PE side out kyerɛ?

Ɛkyerɛkyerɛ sɛ ebia PE sealing layer no hwɛ kuru no mu anaa akyi. Akwankyerɛ a ɛteɛ no gyina afiri a wɔde kyekyere nneɛma no so.

Dɛn ne PET/PE a wɔde ahyɛ mu a wotumi yiyi mu?

Ɛyɛ ade a wɔayɛ sɛ ɛbɛkora nsɔano no mudi mu kura bere a wɔrekyekyɛ bere a ɛma sini a ɛwɔ soro no tumi yiyi fi tray no mu denam ahoɔden a wɔahyɛ so no.

Dɛn ne weld-seal package?

Ɛde nsɔano a ɛyɛ den a wɔayɛ ama dwumadie a ɛhia nsɔano ahobanbɔ a ɛkorɔn, nsuo a ɛtwetwe anaa adanseɛ a wɔde sesa.

So ase ntaban no nkutoo na ɛkyerɛ sɛnea peel no mu yɛ den?

Dabi Peel ahoɔden gyina ase web, lidding film, sealing layers, ɔhyew, nhyɛso, tra bere ne flange tebea.

So standard PET/PE yɛ sini a oxygen akwanside pii wom?

Ɛnyɛ nea ɛba ara kwa. Ɛsɛ sɛ wɔde OTR botae a ɛfa laminate nhyehyɛe pɔtee no ho di oxygen-akwanside adwumayɛ ho adanse.

Bere bɛn na wɔhwehwɛ sɛ wɔyɛ PET/EVOH/PE?

Ebia ɛho behia sɛ wɔde EVOH akwanside a ɛwɔ nnuan a oxygen nka ho, bere tenten a wɔde sie ne wim nneɛma a wɔayɛ mu nsakrae.

So wobetumi de sini no ayɛ MAP nneɛma a wɔde kyekyere nneɛma?

Yiw, bere a wɔayɛ nhyehyɛe, OTR, CO2 transmission, sealing system ne gas mixture no ho nhyehyɛe na wɔagye atom ama ade no.

So PET/PE sini betumi akyekye nam a wɔayɛ no foforo?

Aane. Ɛsɛ sɛ wɔpaw akwansideɛ, tokuru, nsɔano ne MAP su a ɛhia sɛdeɛ nam a wɔde yɛ aduane ne ne nkwa nna a wɔde asie no teɛ.

So ebetumi akyekye mpataa ne ɛpo mu nnuan?

Aane. Ɛsɛ sɛ wɔhyɛ nsuo, akuturuku, nsuo a ɛtwetwe, awɔw mu nneɛma a wɔde sie ne hua-akwanside ahwehwɛdeɛ so dua.

So ebetumi akyekye kyiisi?

Aane. Ɛsɛ sɛ wɔde akwanside ne CO2 a ɛkɔ nipadua no mu no hyia kyiisi ko ne sɛ ebia ɛkɔ so nyin wɔ ade a wɔde ahyɛ mu no mu.

So PET/PE sini fata ma nnuan a wɔahyɛ no nwini?

Wobetumi de grade a ɛfata adi dwuma bere a wɔasɔ ɔhyew a ɛba fam nkɛntɛnso, nsɔano, delamination ne drop adwumayɛ ahwɛ akyi.

So wobetumi de PET/PE tray ahorow no ahyɛ microwave mu?

Ɛnsɛ sɛ wosusuw sɛ standard APET/PE packaging no yɛ nea microwave ahobammɔ wom. Ɛho hia sɛ wɔyɛ nhyehyɛe a ɛko tia ɔhyew ne sɛnea wɔde di dwuma ho sɔhwɛ.

So PET/PE sini mu aduan yɛ nea asiane biara nni ho?

Ɛsɛ sɛ wɔsi aduane a wɔde di nkitaho no fata so dua ma PET, PE, adhesive, additives, aduane su, ɔhyew ne baabi a wɔrekɔ gua no pɛpɛɛpɛ.

So SGS amanneɛbɔ bi kyerɛ sɛ wodi aduan a wɔde di nkitaho no so?

Amanneɛbɔ a ɛfa aduru no pɔtee, ɔkwan a wɔfa so sɔ hwɛ ne anohyeto ahorow a ɛwɔ hɔ nkutoo na ebetumi afoa asɛm pɔtee bi a wɔde di mmara so.

So RoHS di adanse sɛ nneɛma a wɔde kyekyere nneɛma no yɛ nea asiane biara nni ho wɔ aduan mu?

Dabi RoHS di nneɛma a ɛyɛ hu a ɛwɔ anyinam ahoɔden ne ɛlɛtrɔnik mfiri mu ho dwuma titiriw na ɛnyɛ nea wɔde besi aduan a wɔde di nkitaho ho sɔhwɛ ananmu.

So wobetumi de PET a wɔasan de adi dwuma adi dwuma?

Wobetumi asusuw rPET nhyehyeɛ a ɛfa dwumadie pɔtee bi ho sɛdeɛ ɔha mu nkyekyɛmu a wɔasan de adi dwuma, akwansideɛ a ɛtu mpɔn ne baabi a wɔrekɔ-gua aduane-nkitahodiɛ ahwehwɛdeɛ teɛ.

So wotumi san de PET/PE laminated film di dwuma bio?

Nneɛma a wɔsan de di dwuma no gyina laminate nhyehyɛe a edi mũ ne nhyehyɛe a wɔde boaboa ano, hyehyɛ ne nea wɔsan de di dwuma a ɛwɔ gua a wɔde kɔ baabi a wɔrekɔ no so.

Dɛn ne dodow a ɛba fam koraa a wɔkra?

MOQ a ɛyɛ gyinapɛn no bɛyɛ 1000kg. Amanneɛbɔ nhyehyɛe, kɔla ne akwanside soronko grades betumi ahwehwɛ dodow soronko.

So nhwɛsode ahorow wɔ hɔ?

A4 nkratafa a ɛwɔ hɔ dedaw, asinasin a wɔatwitwa anaa sɔhwɛ nhoma mmobɔwee a anohyeto wom betumi aba a wɔde bɛyɛ, asɔw ne akwanside nhwehwɛmu.

Dɛn ne bere a wɔde yɛ adwuma no?

Standard production taa hwehwɛ bɛyɛ adwuma nnafua 10-14 wɔ specification, sample, packaging ne payment confirmation akyi.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa ade no, shelf nkwa, ne nyinaa kɛse, layer nhyehyɛe, trɛw, roll dimensions, forming bun, lidding film, seal type, akwanside botae, dodow ne destination ma.

Nya Amanneɛbɔ PET / PE Film Quote

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Kuo no de PET/PE laminated films, PET/EVOH/PE barrier films, PET aduan trays, CPET trays, lidding films, PET sheets, PVC sheets ne nneɛma a wɔayɛ no sɛnea wɔpɛ ma amanaman ntam B2B adetɔfo.

HSQY boa nnwumakuw a wɔyɛ thermoforming, wɔn a wɔyɛ nam, wɔn a wɔhyehyɛ po mu nnuan, wɔn a wɔyɛ kyiisi, wɔn a wɔdannan nnuan a wɔde kyekyere nneɛma, wɔn a wɔde nneɛma ba amannɔne ne wɔn a wɔkyekyɛ no denam nneɛma a wɔpaw, nhwɛsode sɔhwɛ, nea wɔyɛ no sɛnea wɔpɛ, nhwehwɛmu a wɔyɛ no yiye ne nneɛma a wɔde kɔ amannɔne so.

Bisa Quote ne Nhwɛsode

HSQY Nneɛma a Wɔde kyekyere Nneɛma Ho Ɔyɛkyerɛ ahorow