Transparent Clear Plastique PET/PE Laminés Film Pour Plastique Dumuni Sani

Film transparent PET/PE laminé pour les plateaux du dumuni

HSQY bɛ filimu jɛlen dilan min bɛ kɛ ni PET/PE ye, min bɛ kɛ dumunikɛminɛnw ye minnu dilannen don ni funteni ye, minnu bɛ kɛ ni foroko-falen-sigilenw foroko ye, sogo sagatiw, jɛgɛminɛnw, kɔnɔw forokow, foromazi pakew, delifɛnw ani dumuni nɛnɛma wɛrɛw.

O fɛn ye duguma-yɔrɔ ye min bɛ se ka kɛ ni funteni ye, min bɛ kɛ ni APET sigicogo ye min faralen don ɲɔgɔn kan ni PE sigilan ye. PET layini bɛ kɛnɛya, gɛlɛya ani foroko dɛmɛni di, ka sɔrɔ PE layini bɛ funteni-datugu baarakɛcogo ni ji kunbɛnni di.

Fɛn min jiralen don, o bɛ sɔrɔ a janya bɛɛ lajɛlen na k’a ta milimɛtɛrɛ 0,23 ɲɔgɔn na ka se milimɛtɛrɛ 0,58 ma. Reference construction bɛ baara kɛ ni PE sigilan ye min bɛ se 50μm ma, ka sɔrɔ PET janya, PE janya ani lamini bɛɛ lajɛlen jɔcogo bɛ se ka kɛ ka kɛɲɛ ni sanubɔlan dilanni n’a foroko sira ye.

Kulu jɛlenw bɛ se ka dilan papiye kɔnɔ minnu janya ye santimɛtɛrɛ 3 walima santimɛtɛrɛ 6 ye, ni kurukuruw bonya bɛ kɛ ka kɛɲɛ ni i yɛrɛ sago ye, kurukuru janya, kurukuru girinya, kɛnɛma cɛmancɛ ani kurukuru sira.

Pake suguya minnu bɛ se ka sɔgɔ ani minnu bɛ se ka siri ni welda ye, olu bɛ se ka labɛn ka kɛɲɛ ni datugulan filimu sugandilen ye, datugucogo funteni, sigi waati, degun, sanubɔlan-flange dilanni ani da wuli fanga wajibiyalen.

Standard PET/PE bɛ jiracogo jɛlen di, ka thermoformability ani ka sigicogo dafalen di. Fɛn minnu ka kan ka mara waati jan, fiɲɛ foroko caman sɛmɛntiyalen walima oksizɛni caman balilan kɛrɛnkɛrɛnnen, olu ka kan ka baara kɛ ni fɛn ye min ka OTR ni WVTR hakɛ sɛgɛsɛgɛlen don, i n’a fɔ PET/EVOH/PE ni a bɛnnen don.

Sɛgɛsɛgɛli kɛ HSQY PET/PE lamini filimuw ka ca, PET/PE dumunifɛnw foroko sanubɔlanw ani PET/EVOH/PE sanubɔlanw minnu bɛ barika caman sɔrɔ.

PET/PE Film Pricing ɲini    Aw bɛ Forming ani Sealing Samples ɲini

PET/PE Laminated Film Wideyo

Aw ye wideyo lajɛ min bɛ duguma walasa ka kunnafoni caman sɔrɔ HSQY PET/PE laminated film kan, thermoforming applications, roll formats ani dumunifɛnw foroko furakɛli fɛɛrɛw kan minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

PET/PE Laminated Film ye mun ye?

PET/PE laminated film ye fɛn ye min bɛ kɛ ka fɛn caman kɛ, min bɛ poliyetilɛni tereftalati sɔgɔlen gɛlɛn walima a tilayɔrɔba gɛlɛn ni poliyetilɛni datugulan fara ɲɔgɔn kan.

APET bɛ jɔcogo fɔlɔ, gɛlɛya, kɛnɛya ani thermoforming dɛmɛ di. PE bɛ dumuni ni ɲɔgɔn cɛ yɔrɔ dɔ di min bɛ se ka datugu, ka ji kunbɛn ani ka gɛlɛya wɛrɛw di.

Termoforming waati, laminati sumalen bɛ sama ka don dingɛw kɔnɔ walasa ka sanubɔlanw walima duguma pakew dilan. O kɔfɛ, dumuni bɛ don dingɛw kɔnɔ minnu dilannen don ani ka sanfɛla filimu min bɛ bɛn o ma, o bɛ siri sanubɔlan flansɛ la.

O fɛn bɛ se ka ɲɛfɔ fana i n’a fɔ APET/PE duguma web, PET/PE filimu gɛlɛn, PET/PE thermoforming roll, sanubɔlan jɛlen filimu walima PET/PE foroko-fa-sigi filimu.

PET/PE Thermoforming Bottom Film vs. Filimu min bɛ datugu

Nin fura in bɛ bila fɔlɔ i n’a fɔ PET/PE duguma web walima sanubɔlan min bɛ se ka kɛ ni funteni ye, sanni ka kɛ finimugu ye min bɛ se ka wuli ka bɔ a nɔ na.

PET/PE Film Jaw jɛlenw

APET/PE Laminated Film Sεbεncogo

Sɛbɛn labanw ka kan ka layini jɔcogo dafalen fɔ, a janya bɛɛ lajɛlen, layini kelen-kelen bɛɛ janya, a bonya muɲuni, a kuru janya, a kɔnɔna cɛmancɛ, a kɛnɛma cɛmancɛ, a jiginni sira, a ɲɛkisɛ cogoya, a barika hakɛw ani a sigicogo wajibiyalenw.

PET ni PE Layer Baarakɛcogo

Peel Seal vs. Soudure Seal Packaging

Peel walima weld baarakɛcogo bɛ dabɔ pakew sigicogo dafalen fɛ. Jiginni web, datugulan filimu, sigilanw, sanubɔlan flansɛ, fɛn dilannenw nɔgɔli, funteni, tansiyɔn ani sigi waati ka kan ka sɛgɛsɛgɛ ɲɔgɔn fɛ.

Thermoforming baarakɛcogo wajibiyalenw

Sofaw ka kelenya

PET/PE lamini ka kan ka sumaya cogo kelen na ɛntɛrinɛti kan walasa ka sigida ka sɔgɔsɔgɔ kojugu, kurukuruw ani a dilanni dafabali dɔgɔya.

Forming Depth ani Jara hakɛ

Kɔnɔw jugumanw, nkɔni fitininw ani jatebɔ hakɛ caman bɛ se ka kɛ sababu ye ka PET layɛrɛ belebeleba, mɔli radiyali ɲumanw, plug dɛmɛni walima degun dilan.

Kogo-kɛnɛya-jatebɔ

Nkɔni ni kɛrɛfɛla minnu dilannen don, olu ka kan ka to u janya bɛrɛbɛrɛ la walasa ka se ka sɔgɔsɔgɔ, ka kari ani ka fɛn caman tigɛli bali fa ni u ta waati.

Layer Adhesion (Layer Adhesion) ye

PET ni PE layiniw ka kan ka to ɲɔgɔn na funteni, sɔgɔli, tigɛ, datugu, nɛnɛ ani pake dabɔli waati.

Moule bɔli ani Densting

Mold draft, surface friction ani stacking geometry bɛ nɔ bila bɔli la molde la ani sanubɔlan dafalenw farali la.

Trimming ani Scrap Handling (Sɔgɔli ni fɛn tiɲɛnenw minɛcogo).

Laminati min dilannen don, o ka kan ka tigɛ ka saniya ka sɔrɔ a ma kɛ ni jiribuluw ye kojugu, ka kari walima ka a tigɛtigɛ da la min tɛ se ka kunbɛn.

PET/PE jɔcogo minnu bɛ kɛ ni sariya ye ani minnu ka barika ka bon

OTR, WVTR ani MAP ka wajibiw

Barika baarakɛcogo ka kan ka jira ni nafa sumanlenw ye sanni ka ɲɛfɔli caman kɛ i n’a fɔ barika ɲuman walima barika min ka bon.

Kɔrɔbɔli cogoyaw, i n’a fɔ funteni ni nɛnɛ hakɛ, olu ka kan ka fɔ ɲɔgɔn fɛ ni barika hakɛ bɛɛ ye.

PET/PE Laminated Film baarakɛcogo

• Sogo kura sanubɔlanw : Aw bɛ pake jɛlenw kɛ minnu dilannen don ni funteni ye, misisogo, donsokɛ sogo ani sogo dilannenw kama.

• Kɔnɔw foroko: Sani ni foroko-falen-pake minnu bɛ kɛ sogo ni kɔnɔ nɛnɛman wɛrɛw kama.

• Jɛgɛ ni kɔgɔjilafɛnw : Pake jɛlenw minnu bɛ ji kunbɛnni wajibiya, ka sɔgɔsɔgɔninjɛ kunbɛn ani ka sigilan dafalen wajibiya.

• Foromazi foroko : Foromazi fɛnw tigɛlenw, u sɔgɔlen, u blokiw ani u tilalen don ɲɔgɔn na.

• Deli dumuniw : Sogo labɛnnenw, salatiw, antipasti ani nɛnɛ labɛnnenw.

• Sɛnɛfɛn kuraw: Jiridenw, nakɔfɛnw, ɲɛgɛnw ani fɛn labɛnnenw.

• Buuru ni dumunifɛnw dilanni: Aw bɛ sanubɔlanw jɛya ani ka fɛnw jira minnu bɛ kɛ ka fɛnw nɛnɛ walima minnu bɛ lamini fɛnw na.

• Fiɲɛbɔlan minnu bɛ fɛn caman sɛmɛntiya: Barika caman bɛ sɔrɔ minnu na, olu dabɔra gazi ɲagaminen wajibiyalenw ni a marali waati kama.

• Vacuum packaging: Pake dilanni minnu bɛ sigilan barikamaw ni fɛnw tilatilali kɔlɔsilen de wajibiya.

Nɛnɛ, Nɛnɛ ani Funteni wajibiyalenw

PET/PE lamini sanubɔlanw bɛ dilan tuma caman na dumuni nɛnɛmaw ni dumuni sumalenw kama minnu sugandira, nka baarakɛcogo-funteni hakɛ tigitigi ka kan ka tiɲɛ ka ɲɛsin sigicogo ma min dagalen don.

Funteni dɔgɔyalen sɔgɔli, sanubɔlan karilen, sigilan fanga, delamination ani drop baarakɛcogo ka kan ka sɛgɛsɛgɛ nɛnɛ waati wajibiyalen kɔfɛ.

APET/PE sariyalen man kan ka fɔ a yɛrɛma ko a bɛnnen don mikro-onde tasuma ma, foro kɔrɔw, retort baara walima pastɛri kɛli funteni caman na.

Fɛn minnu bɛ funteni kunbɛnni wajibiya, olu ka kan ka baara kɛ ni sigida ye min dilannen don kɛrɛnkɛrɛnnenya la ani min sɛgɛsɛgɛra ka kɛɲɛ ni funteni, waati ani funteni fɛɛrɛ laɲininen ye.

Dumuni-ɲɔgɔn-ɲini ani sariyaw ka wajibiw

Dumuni ni ɲɔgɔn cɛ bɛnnen don, o bɛ bɔ PET resin, PE resin, adhesive walima tie layer, faralifɛnw, fɛn minnu bɛ segin ka kɛ fɛn wɛrɛw ye, kulɛriw ani a dilanni taabolo.

Sannikɛlaw ka kan ka taa jamana min na, dumuni suguya, a sɔrɔcogo funteni, a magali waati, a nɛnɛ cogoya ani ni dumuni ye tuluma ye, asidi bɛ a la, ni dɔlɔ bɛ a la, nɔnɔ bɛ bɔ a la walima ni a bɛ ji la.

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ dumuni ni ɲɔgɔn cɛ jirali ye, mɔgɔw ka jiginni bɛɛ lajɛlen ni kɛrɛnkɛrɛnnenw, resin jirali, fɛnw dantigɛlenw ani jogoɲumanya seereyaw.

SGS ka rapɔɔri ka kan ka ɲɛfɔ ka kɛɲɛ ni sɛgɛsɛgɛli tigitigi ye min dafara, wa a tɛ sariya labatoli sigi a yɛrɛma jamana walima ɲinini bɛɛ kɔnɔ.

RoHS ɲɛsinnen bɛ fɔlɔ fɛnw ma minnu dantigɛlen don kuran ni ɛntɛrinɛti minɛnw kɔnɔ, wa a man kan ka kɛ dalilu jɔnjɔn ye dumuni ni ɲɔgɔn cɛ lakanani na.

Fura ni furakɛli foroko

Furakɛcogo ni furakɛli kɛcogo bɛ PET/PE hakɛ kɔlɔsi min bɛ kɔlɔsi danfara la sanni ka dumunikɛminɛnw ɲɛfɔcogo bɛɛ lajɛlen kɛ.

Sannikɛla ka kan ka fɛn min bɛ foroko kɔnɔ, a datugulan, a sterilize kɛcogo, a saniyacogo, a bɔcogo, a ka jiginni wajibiyalenw ani a foroko-sɛgɛsɛgɛli sariya dɔn.

Furakɛcogo walima furakɛli foroko dafalen ka kan ka tiɲɛ, a dilanni, a datugulen, a sterilize, a tacogo ani a maracogo sɛgɛsɛgɛli kɔfɛ.

PET/PE Laminate Segin-ka-bɔnye

PET ni PE ye polimɛri denbayaw ye minnu tɛ kelen ye, o la PET/PE lamini man kan ka ɲɛfɔ a yɛrɛma i n’a fɔ fɛn kelen walima fɛn min bɛ se ka segin ka kɛ fɛn wɛrɛ ye diɲɛ bɛɛ kɔnɔ.

Segin-ka-bɔnye bɛnkan bɛ bɔ PET kɛmɛsarada la, PE kɛmɛsarada la, nɛgɛ, EVOH walima baarakɛcogo wɛrɛw la, kulɛri, labeliw, sɛbɛnni ani segin-ka-bɔ-cogo min bɛ kɛ yɔrɔ sugu la.

A fanba la, PET jɔli minnu bɛ ni layɛrɛw ye minnu tɛ PET ye, olu kɔlɔsira koɲuman, olu bɛ se ka kɛ sababu ye ka bɛnkan ɲuman di ni PET thermoform recycling systems ye, nka foroko dafalen ka kan ka jateminɛ ka kɛɲɛ ni dilancogo-la-segincogo ɲɛfɔli ye min bɛ sirataama.

Kuma min bɛ fɔ ka ɲɛ kosɛbɛ, o ye ko fɛnw lasegincogo ka kan ka jateminɛ ni laminati jɔcogo dafalen ye ani fɛnw dalajɛ, u tilacogo ani u lasegincogo minnu bɛ sɔrɔ sigida la.

Sɛgɛsɛgɛli minnu bɛ kɛ ka ɲɛsin jogoɲumanya kɔlɔsili ma

• PET, PE, nɔrɔlen ani farali sɛgɛsɛgɛli.

• Total thickness ani kelen-kelen layɛrɛ janya.

• Transverse thickness profile ani thickness muɲuni.

• Kulu bonya, kuru janya, a girinya jɛlen ani papiye-kɔnɔna hakɛ.

• Aw bɛ kɛnɛma diameter, winding direction ani winding tension.

• Roli flakɛli, teleskɔpi, bloki ani dakun cogoya.

• Yeelen tali, sisi, jɛya, tintin ani ɲɛnayeli nafama.

• PET-to-PE laminati sirili fanga.

• Delamination (bɔli) kɛli kɔfɛ, a datugulen, a nɛnɛni ani a bɔli kɔfɛ.

• Tensile strength, elongation, stiffness ani a bɛ se ka sɔgɔsɔgɔ.

• Puncture ani sharp-bone resistance yɔrɔ minnu na a mago bɛ a la.

• Fenɛtiri thermoforming, web sag ani sofa kelen-kelen.

• Foroko juguya ni kogo-kɛnɛya tilali.

• Mold bɔli, stacking ani densting baarakɛcogo.

• Trimming ani cut-edge jogo ɲuman.

• Aw bɛ daminɛ funteni ni sigili finɛtiri sigi.

• Peel fanga walima weld-seal fanga.

• Sigilanw nɔgɔli, ji bɔli ani u pɛrɛnni sɛgɛsɛgɛli.

• OTR, WVTR ani CO2 cili yɔrɔ minnu ɲɛfɔlen don.

• MAP gazi-maracogo sɛgɛsɛgɛli yɔrɔ minnu na a mago bɛ a la.

• Nɛnɛ-marayɔrɔ, nɛnɛ, jigincogo ani taa-ni-segin sɛgɛsɛgɛli.

• Dumuni ni ɲɔgɔn cɛ jiginni ani sɛbɛnw lajɛ.

• Pake, palɛti ani minɛnw doni sɛgɛsɛgɛli.

PET/PE Laminated Film Sugandili minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

• A janya bɛɛ lajɛlen bɛ daminɛ milimɛtɛrɛ 0,23 ɲɔgɔn na ka se milimɛtɛrɛ 0,58 ma.

• PET ni PE layɛrɛ janya minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• PET/PE standard ani PET/EVOH/PE jɔcogo minnu bɛ barika caman sɔrɔ.

• PET npogotiginin ani rPET sigicogo kɛrɛnkɛrɛnnenw.

• Kulɛri jɛlenw, bulu jɛman, nɛrɛma, fin ani ladamu.

• Rollo bonya, a janya, a girinya ani a kɛnɛma cɛmancɛ bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Paper cores 3-inch ani 6-inch.

• PE fan in walima PE fan out winding.

• Peelable ani weld-seal pakew dilancogo.

• Vacuum, MAP ani dumuni nɛnɛmaw foroko hakɛw.

• Anti-fog top-film bɛnkan dɛmɛni.

• Misaliw minnu bɛ kɛ ka foroko, sigili ani barika sɛgɛsɛgɛliw kɛ.

• Rollo labels, cartons, palettes ani shipping marks minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

Kunnafoni minnu ka kan ka kɛ PET/PE Film Quote kama

• Dumuni walima fɛn dilannen min bɛ pake kɔnɔ.

• A marali waati wajibiyalen ani a maracogo funteni.

• Vacuum, fiɲɛ, MAP walima pakew fiɲɛbɔyɔrɔ wɛrɛ.

• Filimu bɛɛ lajɛlen janya wajibiyalen don.

• PET, PE ani barikalan-yɔrɔ janya wajibiyalenw.

• Rollo bonya ni a bonya muɲuni wajibiyalen.

• Kuru janya wajibiyalen, kuru girinya ani kɛnɛma cɛmancɛ hakɛ min ka ca.

• Paper core 3-inch walima 6 inch.

• PE fan in walima PE fan out winding direction.

• A ɲɛ jɛlen don, a ɲɛ ye kulɛri ye walima a ɲɛ tɛ ye.

• Thermoforming-machine model ani layini teliya.

• Moule hakɛw, cavity depth ani draw ratio.

• Lidding-film material sugandilen ani a janya.

• Peelable walima weld-seal wajibiyalen don.

• Sigiyɔrɔ funteni, tansiyɔn ani sigi waati wajibiyalen.

• OTR, WVTR walima CO2 cili wajibiyalen don.

• Puncture, impact ani leak baarakɛcogo wajibiyalen.

• Laɲini sugu ani dumuniko sɛbɛnw.

• Koman fɔlɔ hakɛ ani san ɲinini jateminɛlen.

• Packing, destination port ani delivery don wajibiyalen.

Aw ye aw ka PET/PE Film wajibiyalenw ci

Packing ani Delivery

Misaliw foroko : A4 sɛbɛnw, misali tigɛlenw ani sɛgɛsɛgɛli sɛbɛn surunw bɛ se ka pake lakanabagaw ka bɔrɔw ni cidenw ka kartɔnw kɔnɔ.

Kuluw pake : PET/PE kurukuruw bɛ se ka siri ni PE filimu ye, ni fɛn ye min tɛ ji bɔ, ni kraft papier ye ani ni dakun lakanani ye.

Core protection: Paper cores ni roll ends bɛ se ka lakana walasa ka dɔ bɔ u mugucili la, u ka nɔgɔli la ani u dawolo tiɲɛni na.

Palɛti pake : Palɛti doni min bɛ tali kɛ a la, o bɛ se kilo 500-2000 ma ka kɛɲɛ ni kuru hakɛ ni a minɛcogo wajibiyalenw ye.

Minɛn doni : Reference doni bɛ kɛ tɔni 20 ɲɔgɔn ye, ka kɛɲɛ ni rollo cɛmancɛ ye, palɛti labɛncogo, minɛn hakɛ ani sariya girinya danw.

Misaliw cicogo: Misaliw bɛ se ka ci DHL, FedEx, UPS, TNT walima ciden wɛrɛ fɛ min bɛnna a kan.

Sɛnɛfɛnw dilanni waati : A ka c’a la, sɛnɛcogo jɔnjɔn bɛ baarakɛdon 10-14 ɲɔgɔn de wajibiya, a ɲɛfɔcogo, a misali, a foroko ani a sarali dafalen kɔfɛ.

PET ka kunnafonidilan fɛɛrɛbɔsɛbɛn

PET kunnafonidilan min bɛ sɔrɔ, o bɛ mara jukɔrɔ walasa ka kunnafoni bɛɛ lajɛlen sɔrɔ.

Sani aw ka baara kɛ n’a ye sanni walima sariya siratigɛ la, aw bɛ a sɛgɛsɛgɛ ko a kɛcogo, PET layini, PE layini, nɔrɔlan, a janya, a dilanni yɔrɔ ani a bɔli don bɛ tali kɛ PET/PE laminati tigitigi la min bɛ di.

   PET Data Sheet telesarse

Sɛbɛnw ni Kɔrɔbɔli sɛbɛnw

Sɛbɛn minnu bɛ sɔrɔ, olu bɛ se ka kɛ fɛn dilannenw ɲɛfɔcogo ye, dumuni ni ɲɔgɔn cɛ jiracogo, mɔgɔw ka jiginni kunnafoniw, fɛnw dantigɛlenw kunnafoniw, barika sɛgɛsɛgɛli kunnafoniw ani jogoɲumanya seereyaw.

Sɛbɛn kelen-kelen bɛɛ ka kan ka sɛgɛsɛgɛ ka kɛɲɛ ni PET resin tigitigi ye, PE resin, nɔrɔlan, a kɔnɔfɛnw, a janya bɛɛ lajɛlen, a layini jɔcogo ani a dilanni yɔrɔ.

SGS, RoHS ani REACH ka kunnafoniw ka kan ka ɲɛfɔ ka kɛɲɛ n’u ka sɛgɛsɛgɛli hakɛ yɛrɛ ye sanni u ka jate i n’a fɔ dumuni ni ɲɔgɔn cɛ seereyaw minnu bɛ se ka ɲɔgɔn falen.

Mun na i bɛ HSQY sugandi ka kɛ i ka PET/PE Film dilanbaga ye?

• PET/PE thermoforming duguma web ye dumunikɛminɛnw ye.

• A janya bɛɛ lajɛlen bɛ daminɛ milimɛtɛrɛ 0,23 ɲɔgɔn na ka se milimɛtɛrɛ 0,58 ma.

• PET ni PE layɛrɛ jɔli minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Jatebɔ jɛlenw, kulɛrilenw ani baarakɛcogo kɛrɛnkɛrɛnnenw.

• Pake suguya minnu bɛ kɛ ka kɛɲɛ ni sariya ye ani minnu bɛ se ka barika ka bon.

• Peelable ani weld-seal pake-yiriwa dɛmɛ.

• 3-inch ani 6-inch roll cores.

• Rollo bonya, a janya, a girinya ani a wulicogo min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.

• Misaliw minnu bɛ kɛ ka thermoforming, sealing ani barrier evaluation kɛ.

• Dumuni-sɔrɔ-sɛbɛnw dɛmɛni ka da kalasi sugandilen kan.

• Jogoɲumanya sɛgɛsɛgɛli ka kɛɲɛ ni fɛn ɲɛfɔlenw ye minnu dabɔra.

• Export packing ani diɲɛ kɔnɔ kurunbokari dɛmɛ.

Sani u ka caman dilan, HSQY b’a fɔ ko aw ka PET/PE filimu sugandilen kɔrɔbɔ kiliyan ka thermoforming machine lakika kan, a ka mɔli, a ka fasa sira, a dawolo filimu ani a ka sanubɔlanw kan.

Aw ye HSQY lajɛ walasa ka misaliw ni sɔngɔko dɔn

Ɲininkali minnu bɛ kɛ tuma caman na PET/PE Laminated Film kan

PET/PE laminé film ye mun ye?

O ye fɛn ye min bɛ kɛ ni fɛn caman ye, min bɛ PET sigicogo ni PE sigilan fara ɲɔgɔn kan, ka kɛ sanubɔlanw ye minnu dilannen don ni funteni ye ani dumunifɛnw foroko kɔnɔ.

Yala nin ye duguma-yɔrɔ ye wa walima ɲɛda-filimu ye wa?

Nin fura in ye duguma-yɔrɔ ye min bɛ kɛ ni thermoforming semi-rigide ye, min bɛ kɛ ka sanubɔlanw walima pakew duguma yɔrɔw dilan.

Danfara jumɛn bɛ duguma web ni lidding film cɛ?

Jiginni web bɛ kɛ ni funteni ye ka don sanubɔlan kɔnɔ, ka sɔrɔ a datugulan filimu finman bɛ datugu foroko falen kan.

Fɛnɲɛnɛma jumɛnw bɛ sɔrɔ?

Sisan fɛn dilannenw hakɛ bɛ Taa 0,23-0,58mm ɲɔgɔn na a bɛɛ lajɛlen janya la.

Yala PE layɛrɛ ye 50μm ye tuma bɛɛ wa?

50μm ɲɔgɔn ye 'sènfɛjuru ye. PE janya bɛ se ka ladilan ka kɛɲɛ ni sigili ni a kɛcogo wajibiyalenw ye.

PET layɛrɛ bɛ mun kɛ?

PET bɛ kɛnɛya, gɛlɛya, hakɛ sabatili ani dɛmɛ di thermoforming waati.

PE layɛrɛ bɛ mun kɛ?

PE bɛ funteni-datugulan-yɔrɔ di, ji-yɔrɔ-ko ani gɛlɛya wɛrɛw.

Yala PET/PE filimu bɛ se ka kɛ thermoformé ye wa?

Awɔ. Furakɛcogo min dagalen don, o bɛ se ka kɛ ni vacuum ye walima ni degun ye ka kɛ sanubɔlanw ni duguma pakew ye.

Yala o filimu bɛnnen don foroko-falen-sigi-masinw ma wa?

A bɛ se ka labɛn foroko-fa-sigi-minɛnw kama masin, a bonya, a foroko juguya, a kurukuru cɛmancɛ ani a datugucogo dafalen kɔfɛ.

Rollo cores jumɛnw bɛ sɔrɔ?

Sugandili jɔnjɔnw ye papiye kɔnɔfɛnw ye minnu janya ye santimɛtɛrɛ 3 ye ani santimɛtɛrɛ 6.

Yala rollo bonya bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye wa?

Awɔ. Rollo bonya bɛ se ka ladilan ka kɛɲɛ ni masin ni mɔbili labɛncogo ye.

PE fan in walima PE fan out kɔrɔ ye mun ye?

A bɛ a ɲɛfɔ ni PE sirilan ɲɛsinnen bɛ joginda kurulen kɔnɔna walima a kɔkanna ma. A sira ɲuman bɛ bɔ pakew dilanni masin de la.

PET/PE foroko min bɛ se ka bɔ a la, o ye mun ye?

O ye pake ye min dilannen don walasa ka sigilan dafalen mara a tilatilali waati la ka sɔrɔ ka a to sanfɛla filimu ka bɔ sanubɔlan na ni fanga kɔrɔsilen ye.

Weld-seal pake ye mun ye?

A bɛ baara kɛ ni sigilan barikama ye min dabɔra baarakɛminɛnw kama minnu bɛ sigilan lakananiba de wajibiya, ka se ka bɔgɔbɔgɔ walima ka fɛn dɔw sɛgɛsɛgɛ.

Yala duguma-yɔrɔ dɔrɔn de bɛ ɲɛgɛnw fanga dantigɛ wa?

Ayi.

Yala PET/PE standard ye filimu ye min bɛ oksizɛni caman bali wa?

A tɛ kɛ a yɛrɛma. Oksizɛni-bariyɛri baarakɛcogo ka kan ka sɛgɛsɛgɛ ni OTR hakɛ ye lamini jɔcogo tigitigi la.

PET/EVOH/PE ka kan ka kɛ tuma jumɛn?

EVOH barikalan bɛ se ka kɛ dumuniw na minnu bɛ oksizɛni sɔrɔ, u marali waati jan ani fiɲɛ foroko caman caman cili.

Yala filimu bɛ se ka kɛ ka MAP pakew kɛ wa?

Ɔwɔ, ni a jɔcogo, OTR, CO2 cicogo, a sigicogo ani a gazi ɲagaminen dabɔra ka a sɛmɛntiya fura in kama.

Yala PET/PE filimu bɛ se ka sogo kuraw pake wa?

Awɔ. Barika, sɔgɔli, sigili ani MAP jogo wajibiyalenw ka kan ka sugandi ka kɛɲɛ ni sogo fura ye ani a marali waati laɲini.

Yala a bɛ se ka jɛgɛ ni kɔgɔjilafɛnw pake wa?

Awɔ. Ji, sɔgɔsɔgɔninjɛ, bɔgɔbɔli, nɛnɛ marali ani kasa-dafirili wajibiyalenw ka kan ka dafa.

Yala a bɛ se ka foromazi pake wa?

Awɔ. Barika ni CO2 tali ka kan ka bɛn foromazi suguya ma ani n’a bɛ taa a fɛ ka kɔgɔ foroko kɔnɔ.

Yala PET/PE filimu bɛnnen don dumuni sumalenw ma wa?

Kalansen bɛnnen bɛ se ka kɛ ni funteni dɔgɔyalen sɔgɔli, sigilan, delamination ani drop baarakɛcogo kɔrɔbɔlen kɔfɛ.

Yala PET/PE sanubɔlanw bɛ se ka bila mikro la wa?

APET/PE foroko kɛcogo kɔrɔ man kan ka jate ko a tɛ se ka kɛ mikrowɛn na. Furakɛcogo min bɛ se ka funteni kunbɛn ani a kɛcogo sɛgɛsɛgɛli de ka kan.

Yala PET/PE filimu dumuniw farati tɛ wa?

Dumuni ni ɲɔgɔn cɛ bɛnnen ka kan ka dafa PET, PE, nɛgɛ, faralifɛnw, dumuni suguya, funteni ani taayɔrɔ sugu tigitigi la.

Yala SGS ka kunnafoni dɔ b’a jira ko dumuni ni ɲɔgɔn cɛ sariya labatoli bɛ kɛ wa?

Raporo min bɛ fura tigitigi, sɛgɛsɛgɛli kɛcogo ani dan minnu bɛ sirataama, olu dɔrɔn de bɛ se ka sariya labatoli fɔlen kɛrɛnkɛrɛnnen dɔ dɛmɛ.

Yala RoHS b’a jira ko pakew ye dumuni nafama ye wa?

Ayi RoHS bɛ fɛn faratilenw ɲɛnabɔ fɔlɔ kuran ni ɛntɛrinɛti minɛnw kɔnɔ, wa a tɛ dumuni ni ɲɔgɔn cɛ sɛgɛsɛgɛli nɔnabila ye.

Yala PET min bɛ segin ka kɛ fɛn wɛrɛ ye, o bɛ se ka kɛ wa?

rPET sigicogo kɛrɛnkɛrɛnnenw bɛ se ka jateminɛ ka kɛɲɛ ni kɛmɛsarada la min bɛ segin ka kɛ fɛn wɛrɛ ye, barika min bɛ se ka kɛ ani ka kɛɲɛ ni yɔrɔ-sɔgɔli dumuni-ɲɔgɔnna wajibiyalenw ye.

Yala filimu lamininen PET/PE bɛ se ka segin ka kɛ fɛn wɛrɛ ye wa?

Segin-ka-bɔnye bɛ bɔ laminati jɔcogo dafalen na ani fɛnw dalajɛ, u tilacogo ani u lasegincogo minnu bɛ sɔrɔ yɔrɔ sugu la.

Koman hakɛ fitinin ye mun ye?

MOQ sariyalen bɛ kilo 1000 ɲɔgɔn bɔ. Laada jɔcogo, kulɛriw ani barika kɛrɛnkɛrɛnnenw bɛ se ka hakɛ wɛrɛ de wajibiya.

Yala misaliw bɛ sɔrɔ wa?

A4 sɛbɛnw minnu bɛ yen, tigɛlenw walima sɛgɛsɛgɛli sɛbɛn danmadɔw bɛ se ka sɔrɔ walasa ka u dilan, ka u datugu ani ka u bali ka u jateminɛ.

A dilanni ɲɛminɛ waati ye mun ye?

A ka c’a la, sɛnɛfɛnw dilanni sariyalen bɛ baarakɛdon 10-14 ɲɔgɔn de wajibiya, a ɲɛfɔli, a misali, a foroko ani a sarali dafalen kɔfɛ.

Kunnafoni jumɛnw de ka kan ka kɛ walasa ka quotation sɔrɔ?

Aw bɛ fɛn dilannen, a marali waati, a janya bɛɛ lajɛlen, a layɛrɛ jɔcogo, a bonya, a wulicogo, a dilanni juguya, a datugucogo filimu, a sigilan suguya, a barika laɲini, a hakɛ ani a taayɔrɔ di.

Aw ye PET/PE Film Quote sɔrɔ min bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye

HSQY Plastic Group ko la

HSQY Plastic Group bɛ PET/PE lamini filimuw, PET/EVOH/PE barika filimuw, PET dumunikɛminɛnw, CPET sanubɔlanw, datugulan filimuw, PET sɛbɛnw, PVC sɛbɛnw ani dumunifɛnw foroko fɛnw di diɲɛ B2B kuntigiw ma.

HSQY bɛ dɛmɛ don thermoforming tɔnw ma, sogo dilannikɛlaw, kɔgɔjilafɛnw pakew dilannikɛlaw, foromazi dilannikɛlaw, dumunifɛnw foroko caman tigɛlikɛlaw, fɛnw donbagaw ni u feerelaw ni fɛnw sugandili ye, misali sɛgɛsɛgɛli, u dilanni ka kɛɲɛ ni mɔgɔw sago ye, u ka jogo sɛgɛsɛgɛli ani u ka pakew bɔli jamana wɛrɛw la.

Quote ni Sample ɲini

HSQY ka pakew jirali