Transparent Kɔkɔ Plastik PET / PE Laminated Film Na Plastik Nuɖuɖu Tray

PET / PE Laminated Film si me kɔ na Nuɖuɖu Trays

HSQY wɔa PET / PE laminated film si me kɔ na thermoformed nuɖuɖu agbawo, form-fill-seal packaging, lã trays, tɔmelã agbawo, koklolã bablawo, cheese bablawo, deli nuwɔna kple nuɖuɖu fafɛ bubuwo zazã.

Nusi wotsɔ wɔe nye afã-sesẽ thermoformable ete web si me APET xɔtuɖoɖo ƒe ƒuƒoƒo si wotsɔ ƒo ƒu kple PE nutrenu ƒuƒoƒo. PET ƒe ƒuƒoƒoa naa nukpɔkpɔ, sesẽ kple wɔwɔme ƒe kpekpeɖeŋu, esime PE ƒuƒoƒoa naa dzoxɔxɔ-nutrenu ƒe dɔwɔwɔ kple tsi ƒe tsitretsitsi.

Adzɔnu si woɖe fia la li le eƒe titrime katã me tso abe 0.23mm va ɖo 0.58mm ene. Nufiame xɔtutu zãa abe 50μm PE nutrenu ƒuƒoƒo, esime PET titrime, PE titrime kple blibo laminate wɔwɔme ate ŋu atrɔ asi le le tray ƒe nɔnɔme kple nubablɛ ƒe fli nu.

Woate ŋu atsɔ agbalẽ xatsaxatsa siwo me kɔ la ana ɖe pepa siwo ƒe didime nye inch 3 alo inch 6 dzi kple agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme, gotagome didime kple mɔ si dzi woaƒoe ɖo.

Woate ŋu ato peelable kple weld-seal packaging tiatiawɔblɔɖe vɛ le tiatia lidding film, nutrenu dzoxɔxɔ, nɔƒe ɣeyiɣi, nyaƒoɖeamenu, tray-flange ƒe nɔnɔme kple ʋuʋu ŋusẽ si hiã.

Standard PET / PE naa nuƒoƒo si me kɔ, dzoxɔxɔ ƒe nɔnɔme kple nutrenu si ŋu kakaɖedzi le. Ele be adzɔnu siwo hiã be woanɔ anyi didi, yame ƒe nubablɛ siwo ŋu wotrɔ asi le alo mɔxenu si me oxygen sɔ gbɔ ɖo si woɖo ɖi la nazã xɔtuɖoɖo si ŋu OTR kple WVTR ƒe asixɔxɔ siwo ŋu woɖo kpee le, abe PET/EVOH/PE ene le afisi wòsɔ le.

Dzro nu me le... HSQY PET / PE lamination film ƒe hatsotso, PET/PE nuɖuɖu bablawo ƒe agbawo kple PET/EVOH/PE ƒe mɔxenu gã ƒe agbawo.

Bia PET/PE Film ƒe Asixɔxɔ    Bia Kpɔɖeŋuwo wɔwɔ Kple Wo Nutrenu

PET/PE Laminated Film Video

Kpɔ video si le ete be nàsrɔ̃ nu geɖe tso HSQY PET/PE laminated film, thermoforming dɔwɔwɔwo, agbalẽ xatsaxatsa ƒe nɔnɔmewo kple nuɖuɖu-babla ƒe kuxiwo gbɔ kpɔnu siwo wowɔ ɖe ɖoɖo nu ŋu.

Nukae Nye PET/PE Laminated Film?

PET/PE laminated film nye nusi wotsɔ blaa nu geɖe si ƒoa polyethylene terephthalate ƒuƒoƒo sesẽ alo afã sesẽ kple polyethylene nutrenu ƒuƒoƒo.

APET naa gbãtɔ ƒe wɔwɔme, sesẽme, gaglãgbe kple dzoxɔxɔ ƒe wɔwɔme ƒe kpekpeɖeŋu. PE naa nuɖuɖu-kadodo ƒe anyigba si woate ŋu atre, tsi ƒe tsitretsitsi kple sesẽ bubu.

Le dzoxɔxɔ ƒe wɔwɔme me la, wohea laminate si wodo dzoe la yia dowo me be woawɔ tray alo ete ƒe agbawo. Emegbe wotsɔa nuɖuɖu dea do siwo wowɔ me eye wotrea film si sɔ ɖe etame nu ɖe ​​tray la ƒe flange ŋu.

Woate ŋu aɖɔ nusi wotsɔ wɔe hã be APET/PE gɔme web, PET/PE film sesẽ, PET/PE thermoforming roll, tray-forming film si me kɔ alo PET/PE form-fill-seal film.

PET / PE Thermoforming Anyigba Film vs. Nutsyɔnu Film

Woɖoa atike sia koŋ abe PET/PE te web alo tray-forming material si woate ŋu awɔ dzoxɔxɔ ƒe nɔnɔme ene tsɔ wu be woatsɔ nutsyɔnu si te ŋu trɔna bɔbɔe si wozãna ɖaa.

PET/PE Film Nɔnɔmetata siwo me kɔ

APET/PE Laminated Film ƒe Nɔnɔmewo

Ele be mamlɛawo nagblɔ ƒuƒoƒo ƒe wɔwɔme bliboa, eƒe titrime bliboa, ƒuƒoƒo ɖekaɖeka ƒe titrime, kekeme ƒe mɔɖeɖe, agbalẽ xatsaxatsa ƒe didime, nuto ƒe didime, gota ƒe didime, ʋuʋudedi ƒe mɔfiame, nukpɔkpɔ ƒe nyonyome, mɔxenu ƒe asixɔxɔwo kple nutrenu ƒe nudidiwo.

PET kple PE Layer ƒe Dɔwɔwɔwo

Peel Seal vs. Weld Nutrenu ƒe Nubablɛwo

Peel alo weld dɔwɔwɔ nye bliboe package ɖoɖo. Ele be woaɖo kpe ete web, nutsyɔnu film, sealant layers, tray flange, nusi wowɔ ƒe ɖiƒoƒo, dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woanɔ anyi ɖekae.

Thermoforming ƒe Dɔwɔwɔ ƒe Nudidiwo

Dzoxɔxɔ ƒe Ðekawɔwɔ

Ele be PET/PE laminate la naxɔ dzo sɔsɔe le web la dzi be wòaɖe teƒea ƒe kekeme fũ, flitete kple wɔwɔme si mede blibo o dzi akpɔtɔ.

Goglome kple Draw Ratio wɔwɔ

Do goglowo, dzogoe gbadzawo kple draw ratios kɔkɔ ate ŋu abia PET layer si le kpekpem wu, aŋɔ ƒe didime nyuitɔ, plug ƒe kpekpeɖeŋu alo nyaƒoɖeamenu wɔwɔ.

Gli ƒe Titrime ƒe Mama

Ele be dzogoe siwo wowɔ kple axadzigliwo nalé woƒe titrime si sɔ be woatsi tre ɖe tome, gbagbã kple woƒe tɔtrɔ ŋu le wo yɔyɔ kple wo tsɔtsɔ yi teƒe bubuwo me.

Layer ƒe Adhesion

Ele be PET kple PE ƒuƒoƒoawo nanɔ kadodo me le dzoxɔxɔ, keke, lãɖeɖe, nutrenu, fafa kple nubablɛwo ʋuʋu me.

Mold Release kple Denesting

Mold draft, surface friction kple stacking geometry kpɔa ŋusẽ ɖe asiɖeɖe le aŋɔa me kple tray siwo wowɔ vɔ ƒe mama dzi.

Trimming kple Scrap Dɔwɔwɔ

Ele be woatso laminate si wowɔ la nyuie eye burrs si gbɔ eme, gbagbã si dzi womeɖu o alo delamination le nugbɔ si wotso la manɔ eme o.

Standard kple High-Barrier PET/PE Dɔwɔɖoɖowo

OTR, WVTR kple MAP ƒe Nudidiwo

Ele be woazã asixɔxɔ siwo wodzidze atsɔ aɖe mɔxenu ƒe dɔwɔwɔ afia tsɔ wu be woazã numeɖeɖe siwo katã le abe mɔxenu nyuitɔ alo esi de ŋgɔ wu ene.

Ele be woagblɔ dodokpɔ ƒe nɔnɔmewo, siwo dome dzoxɔxɔ kple fafa si sɔ gbɔ le, kpe ɖe mɔxenu ƒe asixɔxɔ ɖesiaɖe ŋu.

PET/PE Laminated Film ƒe dɔwɔwɔ

• Lã yeye ƒe agbawo: Wotsɔ dzoxɔxɔ ƒe agba siwo me kɔ na nyilã, haƒoƒo kple lã si ŋu wotrɔ asi le.

• Koklolã ƒe agbawo: Trays kple form-fill-seal packs na koklolã kple koklolã bubu siwo wofa.

• Tɔmelã kple ƒumelãwo: Akpa siwo me kɔ siwo hiã be woatsi tre ɖe tsi ŋu, woatsi tre ɖe tome kple nutrenu ƒe blibonyenye ŋu.

• Cheese-babla: Cheese-nu siwo wofli, wofli, woxe mɔ na wo eye woma wo ɖe akpa vovovowo me.

• Deli nuɖuɖuwo: Lã siwo woɖa, sabala, antipasti kple nu fafɛ siwo woate ŋu aɖu.

• Nu yeyewo: Atikutsetse, amagbewo, lãmi kple nusiwo wodzra ɖo.

• Abolomeƒe kple nuɖuɖuvivinuwo: Klɔ agbawo me eye nàɖe nusiwo wobla ɖe wo ŋu siwo wofa fafɛ alo esiwo ƒo xlãe afia.

• Yame ƒe nubablɛ siwo ŋu wotrɔ asi le: Woto mɔxenu gãwo vɛ na gas ƒe tsakatsaka si hiã kple eƒe agbenɔƒe.

• Vacuum packaging: Nubablɛ ƒe nɔnɔme siwo bia be woatsɔ nutrenu sesẽwo aɖo wo ŋu eye woama nusiwo dzi wokpɔna.

Chilled, Frozen kple Dzoxɔxɔ ƒe Nudidiwo

Zi geɖe la, wowɔa PET/PE laminated trays na nuɖuɖu siwo wofa kple esiwo wotia le tsikpe me, gake ele be woaɖo kpe subɔsubɔ ƒe dzoxɔxɔ ƒe didime tututu dzi na xɔtuɖoɖo si dzi woda asi ɖo.

Ele be woado dzoxɔxɔ si bɔbɔ ƒe ŋusẽkpɔɖeamedzi, tray ƒe gbagbã, nutrenu ƒe ŋusẽ, delamination kple drop ƒe dɔwɔwɔ kpɔ le vuvɔŋɔli ƒe ɣeyiɣi si hiã la megbe.

Mele be woaɖɔ APET/PE si wozãna ɖaa le eɖokui si be esɔ na dzoxɔxɔ le microwave me, dzodoƒe bɔbɔewo, retort dɔwɔwɔ alo dzoxɔxɔ gã me pasteurization o.

Ele be nusiwo hiã dzoxɔxɔ ƒe tsitretsitsi nazã xɔtuɖoɖo si wowɔ koŋ eye wodoe kpɔ le dzoxɔxɔ, ɣeyiɣi didi kple dzoxɔxɔ ƒe mɔnu si woɖo be woawɔ nu.

Nuɖuɖu-Kadodo Kple Ðoɖowɔwɔ ƒe Nudidiwo

Nuɖuɖu-kadodo ƒe nyonyo nɔ te ɖe PET resin, PE resin, adhesive alo tie layer, kpeɖeŋutɔ, nusiwo wogbugbɔ zã, amadedewo kple ewɔwɔ ƒe mɔnu dzi.

Ele be nuƒlelawo nade dzesi dukɔ si me woayi, nuɖuɖu ƒomevi, dzoxɔxɔ si woatsɔ aƒo wo nu, ɣeyiɣi didi si woatsɔ aƒo wo nu, nɔnɔme si me wole nufamɔ̃ me kple nenye be ami, acid, aha sesẽ, nyinotsi alo tsi le nuɖuɖua me.

Nuŋlɔɖi siwo li ate ŋu anye nuɖuɖu ƒe kadodo ŋuti nyatakakawo, ʋuʋu ŋuti nyatakakawo katã kple esiwo ku ɖe wo ŋu koŋ, aŋɔ ƒe gbeƒãɖeɖewo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo kple nyonyome dzikpɔkpɔ ŋuti ɖaseɖigbalẽwo.

Ele be woaɖe SGS ƒe nyatakaka aɖe me le dodokpɔ si tututu wowu enu nu eye meɖo kpe edzi le eɖokui si be wowɔ ɖe se dzi le dukɔ alo dɔbiagbalẽvi ɖesiaɖe me o.

RoHS ku ɖe nusiwo ŋu seɖoƒe le le elektrik kple elektrɔnik dɔwɔnuwo me koŋ ŋu eye mele be woazãe abe kpeɖodzi vevitɔ ene na nuɖuɖu ƒe kadodo ƒe dedienɔnɔ o.

Atikewo Kple Atikewɔwɔ Ŋuti Nubablɛwo

Atikewɔwɔ kple atikewɔwɔ ƒe dɔwɔwɔ bia be woaɖo PET/PE ƒe dzesi si dzi wokpɔna ɖe vovo tsɔ wu be woagblɔ nuɖuɖugoe ƒe nɔnɔme si wozãna le mɔ gbadza nu.

Ele be nuƒlela nade dzesi nusi wobla ɖe agba me, nusiwo wotsɔ nutrenue, dɔlékuiwutikewo zazã ƒe mɔnu, dzadzɛnyenye ƒe nudidiwo, nusiwo woate ŋu aɖe, ʋuʋu ƒe nudidiwo kple nusiwo wobla ɖe agba me ƒe kpeɖodzinana ƒe dzidzenu.

Ele be woaɖo kpe atikewɔwɔ alo atikewo ƒe agbalẽvi bliboa dzi le ewɔwɔ, nutrenu, dɔlékuiwutike wɔwɔ, etsɔtsɔ yi teƒe bubu kple eƒe agbenɔƒe dodokpɔ vɔ megbe.

PET / PE Laminate Gbugbɔgazã

PET kple PE nye polymer ƒome vovovowo, eyata mele be woaɖɔ PET/PE laminate le eɖokui si be enye nu ɖeka alo nusi woate ŋu azã ake le xexeame katã o.

Gbugbɔgazã ƒe sɔsɔ nɔ te ɖe PET ƒe alafa memamã, PE ƒe alafa memamã, adhesive, EVOH alo dɔwɔwɔ ƒe ƒuƒoƒo bubuwo, amadede, dzesidewo, agbalẽtata kple gbugbɔgazã ƒe ɖoɖo si wozãna le asi si woɖo tae me dzi.

PET ƒe xɔtuɖoɖo siwo koŋ ŋu wokpɔa ŋusẽ ɖo nyuie le ƒuƒoƒo siwo menye PET o ate ŋu ana woawɔ ɖeka nyuie wu kple PET thermoform recycling systems, gake ele be woada agbalẽvi si wowu enu la akpɔ le mɔfiame si sɔ ɖe aɖaŋuwɔwɔ na nuwo gbugbɔgazã ŋu nu.

Nya si wogblɔ si sɔ wue nye be ele be woazã laminate ƒe xɔtuɖoɖo bliboa kple nuƒoƒoƒu, vovototodedeameme kple wo gbugbɔgazã ƒe xɔtuɖoɖo siwo li le nutoa me atsɔ ada nusiwo woate ŋu azã ake la kpɔ.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PET, PE, adhesive kple additive ƒe kpeɖodzi.

• Titrime bliboa kple ƒuƒoƒo ɖekaɖeka ƒe titrime.

• Transverse titrime profile kple titrime dzigbɔɖi.

• Roll ƒe kekeme, roll ƒe didime, net weight kple pepa-core ƒe didime.

• Roll gota didime, winding mɔfiame kple winding tension.

• Roll gbadzaa, didiƒekpɔmɔ̃, mɔxexe kple nugbɔ ƒe nyonyome.

• Kekeli ƒe kaka, afu, eme kɔ, amadede kple nukpɔkpɔ ƒe gbɔdzɔgbɔdzɔ.

• PET-to-PE laminate ƒe kadodo ƒe ŋusẽ.

• Delamination le wɔwɔ, nutrenu, fafa kple peeling megbe.

• Tensile ŋusẽ, didime, sesẽ kple ƒoƒo tsitretsitsi.

• Puncture kple sharp-bone tsitretsitsi le afisi wòhiã le.

• Thermoforming fesre, web sag kple dzoxɔxɔ ɖekawɔwɔ.

• Forming goglome kple gli-titrime mama.

• Aŋɔ ƒe asiɖeɖe le, stacking kple densting dɔwɔwɔ.

• Trimming kple cut-edge nyonyome.

• Nutrenu gɔmedzedze ƒe dzoxɔxɔ kple nutrenu fesre.

• Peel ŋusẽ alo weld-seal ŋusẽ.

• Seal ƒe ɖiƒoƒo, sisi kple gbagbã dodokpɔ.

• OTR, WVTR kple CO2 ƒe kaka le afisi wogblɔe le.

• MAP gas-léle ƒe dodokpɔ le afisi wòhiã le.

• Dodokpɔ le nufamɔ̃ me, tsikpe me, tsɔa nu ƒua gbe kple ʋuɖoɖo.

• Nuɖuɖu-kadodo ƒe ʋuʋu kple nuŋlɔɖiwo me toto.

• Packing, pallet kple nugoe-agbawo me dzodzro.

Trɔ asi le PET / PE Laminated Film Tiatiawɔblɔɖe

• Eƒe titrime katã tso abe 0.23mm va ɖo 0.58mm.

• PET kple PE ƒe ƒuƒoƒo ƒe titrime siwo wowɔ ɖe ɖoɖo nu.

• PET / PE kple mɔxenu gã PET / EVOH / PE xɔtuɖoɖowo.

• Ðetugbi Nɔaƒe PET kple dɔwɔwɔ-koŋ rPET xɔtuɖoɖowo.

• Amadede siwo me kɔ, blɔ keklẽ, yibɔ, ɣi kple esiwo wowɔ ɖe ɖoɖo nu.

• Wotrɔ asi le agbalẽ xatsaxatsa ƒe kekeme, didime, kpekpeme kple gotagome didime ŋu.

• Pepa ƒe nu vevi siwo ƒe didime nye inch 3 kple inch 6.

• PE axa si le eme alo PE axa ɖe gota winding.

• Peelable kple weld-seal nubablawo ƒe nɔnɔmewo.

• Vacuum, MAP kple nuɖuɖu siwo wofa fafɛ ƒe babla ƒe dzesiwo.

• Anti-fog top-film ƒe kpeɖeŋutɔ si sɔ kple wo nɔewo.

• Kpɔɖeŋuwo na wɔwɔ, nutrenu kple mɔxenu dodokpɔwo.

• Wotrɔ asi le agbalẽ xatsaxatsa ƒe dzesidewo, kakɛwo, pallets kple meliɖoɖo ƒe dzesiwo ŋu.

Nyatakaka Siwo Hiã Na PET/PE Film Quote

• Nuɖuɖu alo nusi wobla ɖe agba me.

• Agbenɔƒe si wobia be woatsɔ adzrae ɖo kple dzoxɔxɔ si woatsɔ adzrae ɖo.

• Vacuum, ya, MAP alo nubablɛ ƒe yame ƒe nɔnɔme bubu.

• Wobia tso film ƒe titrime bliboa si.

• PET, PE kple mɔxenu-kplu ƒe titrime siwo hiã.

• Wobia be woate ŋu alɔ̃ ɖe agbalẽ xatsaxatsa ƒe kekeme kple kekeme dzi.

• Wobia tso agbalẽ xatsaxatsa ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme kple gotagome didime si sɔ gbɔ wu.

• Pepa si ƒe didime nye inch 3 alo inch 6.

• PE akpa ɖe eme alo PE akpa do go mɔ si le tsatsam.

• Dzedzeme si me kɔ, amadede alo esi me mekɔ o.

• Thermoforming-mɔ̃ ƒe kpɔɖeŋu kple fli ƒe duƒuƒu.

• Mould dzidzeme, cavity goglome kple draw ratio.

• Tiatia lidding-film nu kple titrime.

• Peelable alo weld-seal nudidi.

• Nutrenu ƒe dzoxɔxɔ, nyaƒoɖeamenu kple ɣeyiɣi si woanɔ anyi si hiã.

• OTR, WVTR alo CO2 ƒe kaka si hiã.

• Wobia tso puncture, impact kple leak dɔwɔwɔ.

• Asitsaƒe si woayi kple nuɖuɖu-kadodo ŋuti nuŋlɔɖiwo.

• Gbãtɔ ƒe nudɔdɔ ƒe agbɔsɔsɔme kple ƒe sia ƒe ƒe didi si wobu.

• Packing, destination port kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò PET/PE Film Nudidiwo ɖa

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo babla: Woate ŋu abla A4 agbalẽwo, kpɔɖeŋu siwo wotso kple dodokpɔ ƒe agbalẽ xatsaxatsa kpuiwo ɖe ametakpɔkotokuwo kple agbalẽɖoɖoɖaɖakawo me.

Roll packing: Woate ŋu abla PET / PE agbalẽ xatsaxatsawo kple PE film, tsi-tsi-tsitretsitsi nu, kraft pepa kple nugbɔ takpɔkpɔ.

Nu veviwo takpɔkpɔ: Woate ŋu akpɔ pepa ƒe nu veviwo kple agbalẽ xatsaxatsa ƒe nugbɔwo ta be woaɖe woƒe ŋeŋe, ɖiƒoƒo kple nugbɔ ƒe gbegblẽ dzi akpɔtɔ.

Pallet packing: Nufiame pallet agba le abe 500-2000kg le agbalẽ xatsaxatsa ƒe didime kple asiléle ƒe nudidiwo nu.

Agbatsɔtsɔ le nugoe me: Agba si wotsɔ ɖoa ​​nu me la ade tɔn 20, le agbalẽ xatsaxatsa ƒe didime, pallet ƒe ɖoɖo, nugoe ƒe lolome kple kpekpeme ƒe seɖoƒe si le se nu nu.

Kpɔɖeŋuwo ɖoɖoɖa: Woate ŋu aɖo kpɔɖeŋuwo ɖa to DHL, FedEx, UPS, TNT alo amedɔdɔ bubu si dzi wolɔ̃ ɖo dzi.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, ewɔwɔ si sɔ la bia abe dɔwɔŋkeke 10-14 ene le nyatakaka, kpɔɖeŋu, babla kple fexexe ƒe kpeɖodzi megbe.

PET ƒe Mɔ̃ɖaŋununya Ŋuti Nyatakakagbalẽvi

Wodzra PET ƒe nyatakaka gbalẽvi si li la ɖo ɖe ete be woate ŋu akpɔe le afisiafi.

Hafi nàzãe hena nuƒle alo ɖoɖowɔwɔ ƒe taɖodzinuwo la, ɖo kpe edzi be nusi wotsɔ wɔe ƒe hatsotso, PET ƒuƒoƒo, PE ƒuƒoƒo, adhesive, titrime, teƒe si wowɔe kple ŋkeke si dzi woɖee ɖe go la ku ɖe PET/PE laminate si tututu wole tsɔtsɔm na ŋu.

   Wɔ PET Data Sheet ƒe kɔpi

Ðaseɖigbalẽwo Kple Dodokpɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye atikewo ƒe nɔnɔmewo, nuɖuɖu ƒe kadodo ŋuti nyatakakawo, ʋuʋu ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo, mɔxenuwo dodokpɔ ŋuti nyatakakawo kple nyonyome dzikpɔkpɔ ƒe ɖaseɖigbalẽwo.

Ele be woaɖo kpe nuŋlɔɖi ɖesiaɖe dzi le PET resin, PE resin, adhesive, nusiwo wogbugbɔ zã, eƒe titrime bliboa, layer ƒe wɔwɔme kple teƒe si wowɔe le tututu.

Ele be woaɖɔ SGS, RoHS kple REACH ƒe nyatakakawo le woƒe dodokpɔ ƒe lolome ŋutɔŋutɔ nu tsɔ wu be woabu wo abe nuɖuɖu ƒe kadodo ŋuti ɖaseɖigbalẽ siwo woate ŋu atrɔ ene.

Nukatae Nàtia HSQY be wòanye Wò PET/PE Film Dɔwɔƒe?

• PET/PE thermoforming ete web na nuɖuɖu agbawo.

• Eƒe titrime katã tso abe 0.23mm va ɖo 0.58mm.

• PET kple PE layer xɔtutu siwo wowɔ ɖe ɖoɖo nu.

• Xɔtuɖoɖo siwo me kɔ, siwo le amadede vovovowo me eye wosɔ na wo zazã koŋ.

• Standard kple mɔxenu gã ƒe nubabla ƒe tiatia.

• Peelable kple weld-seal package-ŋgɔyiyi kpekpeɖeŋu.

• 3-inch kple 6-inch roll cores.

• Trɔ asi le agbalẽ xatsaxatsa ƒe kekeme, didime, kpekpeme kple ʋuʋudedi ƒe mɔfiame ŋu.

• Kpɔɖeŋuwo na thermoforming, nutrenu kple mɔxenu ƒe dodokpɔ.

• Nuɖuɖu-kadodo ŋuti nuŋlɔɖi ƒe kpekpeɖeŋu si wotu ɖe dzeside si wotia dzi.

• Dzɔdzɔmeŋutete me dzodzro le nɔnɔme tɔxɛ siwo dzi woda asi ɖo nu.

• Export packing kple dukɔwo dome meliɖoɖo ƒe kpekpeɖeŋu.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY ɖo aɖaŋu be woado PET/PE film si wotia la kpɔ le asisi la ƒe dzoxɔxɔ ƒe mɔ̃ ŋutɔŋutɔ, aŋɔ, ka si wotsɔ yɔa nu, nutsyɔnu film kple tray-sealing dɔwɔnuwo dzi.

Te ɖe HSQY ŋu hena Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Tso PET/PE Laminated Film Ŋu

Nukae nye PET/PE laminated film?

Enye nusi wotsɔ ƒo ƒui si me wotsɔa PET xɔtuɖoɖo ƒe ƒuƒoƒo kple PE ƒe nutrenu ƒokpli ƒoa ƒui na agba siwo wotsɔ dzoxɔxɔ wɔe kple nuɖuɖu-babla dɔwo.

Ðe esia nye web si le ete loo alo film si wotsɔ tsyɔa nu nu dzia?

Adzɔnu sia koŋ nye dzoxɔxɔ ƒe akpa si sesẽna le ete ƒe web si wozãna tsɔ wɔa agbawo alo nubablɛ siwo le anyime ƒe dowo.

Vovototo kae le bottom web kple lidding film dome?

Wowɔa dzoxɔxɔ ƒe nɔnɔme si le ete la ɖe agbaa me, esime nutsyɔnu si le tsɛ wu la xea nu ɖe ​​agba si yɔ fũu la dzi.

Titrime kawoe li?

Fifia ƒe adzɔnuwo ƒe hatsotso anɔ abe 0.23-0.58mm le woƒe titrime katã me.

Ðe PE ƒe ƒuƒoƒoa nyea 50μm ɣesiaɣia?

Anɔ abe 50μm ene nye nufiame xɔtuɖoɖo. Woate ŋu atrɔ asi le PE ƒe titrime ŋu le nutrenu kple eŋudɔwɔwɔ ƒe nudidiwo nu.

Nukae PET layer la wɔna?

PET naa nuwɔwɔ le gaglãgbe, sesẽ, didime ƒe liƒo kple kpekpeɖeŋu le dzoxɔxɔ ƒe wɔwɔme me.

Nukae PE layer la wɔna?

PE naa dzoxɔxɔ-nutrenu ƒe anyigba, tsi ƒe tsitretsitsi kple sesẽ bubu.

Ðe woate ŋu awɔ PET/PE film si me dzoxɔxɔ lea?

Ɛ̃. Woate ŋu atsɔ dzoxɔxɔ alo nyaƒoɖeamenu awɔ dzoxɔxɔ ƒe dzesi si dzi woda asi ɖo wòazu agbawo kple nusiwo le ete.

Ðe film la sɔ na mɔ̃ siwo wotsɔ yɔa agbalẽviwo mea?

Woate ŋu atrɔ asi le eŋu na nɔnɔme-yɔyɔ-nutrenu dɔwɔnuwo ne woɖo kpe mɔ̃a, kekeme, wɔwɔme ƒe goglome, agbalẽ xatsaxatsa ƒe didime kple nutsyɔnu ƒe ɖoɖoa dzi vɔ.

Roll cores kawoe li?

Tiatia siwo wozãna ɖaa dometɔ aɖewoe nye pepa siwo ƒe didime nye inch 3 kple inch 6.

Ðe woate ŋu atrɔ asi le agbalẽ xatsaxatsaa ƒe kekeme ŋua?

Ɛ̃. Woate ŋu atrɔ asi le agbalẽ xatsaxatsa ƒe kekeme ŋu le mɔ̃a kple aŋɔa ƒe ɖoɖo nu.

Nukae PE side in alo PE side out fia?

Eɖɔ nenye be PE ƒe nutrenu la dze ŋgɔ abi ƒe agbalẽ xatsaxatsaa ƒe eme alo egodo. Mɔfiame nyuitɔ nɔ te ɖe mɔ̃ si wotsɔ blaa nu dzi.

Nukae nye PET/PE ƒe agbalẽvi si woate ŋu aɖe ɖa?

Enye agbalẽvi si ŋu wotrɔ asi le be wòalé nutrenu ƒe blibonyenye me ɖe asi le emamaɣi esime wòɖea mɔ na film si le etame la be wòaɖe le agbaa me kple ŋusẽ si dzi woɖu.

Nukae nye weld-seal package?

Ezãa nutrenu si sesẽ wu si wowɔ na dɔwɔwɔ siwo hiã nutrenu ƒe dedienɔnɔ gã, tsi si le dodom ƒe tsitretsitsi alo kpeɖodzi be woatrɔ asi le eŋu.

Ðe lãgbalẽgolo si le ete ɖeɖekoe afia alesi lãgbalẽa ƒe ŋusẽ sesẽa?

Ao, Peel ƒe ŋusẽ nɔ te ɖe ete web, lidding film, sealing layers, dzoxɔxɔ, nyaƒoɖeamenu, ɣeyiɣi si wònɔa anyi kple flange ƒe nɔnɔme dzi.

Ðe PET/PE si wozãna ɖaa nye sinima si me oxygen sɔ gbɔ ɖoa?

Menye le eɖokui si o. Ele be woatsɔ OTR ƒe asixɔxɔ aɖo kpe oxygen-mɔxenu ƒe dɔwɔwɔ dzi na laminate ƒe wɔwɔme tututu.

Ɣekaɣie wobiaa PET/EVOH/PE?

Woate ŋu ahiã EVOH mɔxenu ƒe ƒuƒoƒo na nuɖuɖu siwo me oxygen sea nu le, woƒe agbenɔƒe didi wu kple yame ƒe nubablɛ siwo ŋu wotrɔ asi le.

Ðe woate ŋu azã sinima la atsɔ awɔ MAP ƒe nubablɛwoa?

Ẽ, ne wowɔ xɔtuɖoɖo, OTR, CO2 ƒe kaka, nutrenu ƒe ɖoɖoa kple gas ƒe tsakatsaka eye woda asi ɖe edzi na nusi wowɔ.

Ðe PET/PE film ate ŋu abla lã yeyewoa?

Ɛ̃. Ele be woatia mɔxenu, nutrenu, nutrenu kple MAP ƒe nɔnɔme siwo hiã le lãgbalẽa kple eƒe agbenɔƒe ƒe taɖodzinu nu.

Ðe wòate ŋu abla tɔmelã kple ƒumelãwo ɖe agba mea?

Ɛ̃. Ele be woaɖo kpe tsidzadza, do, tsi si le dodom, nufamɔ̃ kple ʋeʋẽ-mɔxenu ƒe nudidiwo dzi.

Ðe wòate ŋu abla cheese ɖe agba mea?

Ɛ̃. Ele be woatsɔ mɔxenu kple CO2 ƒe kaka asɔ kple cheese ƒomevi kple nenye be eyi edzi le tsitsim le agbaa me.

Ðe PET/PE film sɔ na nuɖuɖu siwo wofa tsikpe mea?

Woateŋu azã dzesi si sɔ ne wodo dzoxɔxɔ si bɔbɔ ƒe ŋusẽkpɔɖeamedzi, nutrenu, delamination kple drop ƒe dɔwɔwɔ kpɔ vɔ.

Ðe woate ŋu atsɔ PET/PE-gbadzɛwo ade microwave mea?

Mele be woabui be APET/PE ƒe babla siwo wozãna ɖaa la mele microwave me o. Wohiã xɔtuɖoɖo si te ŋu nɔa te ɖe dzoxɔxɔ nu kple dodokpɔ si woatsɔ awɔe.

Ðe PET/PE film nuɖuɖu le dediea?

Ele be woaɖo kpe nuɖuɖu-kadodo ƒe nyonyo dzi na PET, PE, adhesive, additives, nuɖuɖu ƒomevi, dzoxɔxɔ kple asi si tututu woayi.

Ðe SGS ƒe nyatakaka aɖe ɖo kpe nuɖuɖu ƒe kadodo dzi sewo dzia?

Nyatakaka si ƒo nu tso atike si tututu wowɔ, dodokpɔmɔnu kple seɖoƒe siwo li ŋu koe ate ŋu aɖo kpe sedziwɔwɔ ŋuti nya aɖe koŋ dzi.

Ðe RoHS ɖo kpe edzi be nubablɛwo nye nuɖuɖu dediea?

Ao, afɔkunu siwo le elektrik kple elektrɔnik dɔwɔnuwo me koŋue RoHS ƒoa nu tsoe eye menye nusi woatsɔ aɖɔli nuɖuɖu ƒe kadodo dodokpɔ o.

Ðe woate ŋu azã PET si wogbugbɔ zãa?

Woate ŋu ada rPET ƒe xɔtuɖoɖo siwo ku ɖe dɔwɔwɔ koŋ ŋu kpɔ le alafa memamã si wogbugbɔ zã, mɔxenu si wɔa dɔ nyuie kple nuɖuɖu-kadodo ƒe nudidiwo nu.

Ðe woate ŋu agbugbɔ PET/PE laminated film awɔ dɔa?

Gbugbɔgazã nɔ te ɖe laminate ƒe wɔwɔme bliboa kple nuƒoƒoƒu, hatsotsowo me toto kple wo gbugbɔgazã ƒe ɖoɖo siwo li le asi si me woayi la dzi.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna ɖaa la ade 1000kg. Xɔtuɖoɖo siwo wowɔ ɖe ɖoɖo nu, amadedewo kple mɔxenu ƒe dzesi tɔxɛwo ate ŋu abia agbɔsɔsɔ bubu.

Ðe kpɔɖeŋuwo lia?

A4 gbadzɛ siwo li fifia, kakɛ siwo wotso alo dodokpɔ ƒe agbalẽ xatsaxatsa siwo seɖoƒe li na ate ŋu anɔ anyi hena wɔwɔ, nutrenu kple mɔxenuwo ƒe dodokpɔ.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si sɔ la bia abe dɔwɔŋkeke 10-14 ene le nyatakaka, kpɔɖeŋu, babla kple fexexe ƒe kpeɖodzi megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na nusi wowɔ, nudzraɖoƒe ƒe agbenɔƒe, eƒe titrime bliboa, ƒuƒoƒo ƒe wɔwɔme, kekeme, agbalẽ xatsaxatsa ƒe didime, wɔwɔ ƒe goglome, nutsyɔnu film, nutrenu ƒomevi, mɔxenu ƒe taɖodzinu, agbɔsɔsɔ kple yiyiƒe.

Na PET / PE Film Quote si wowɔ ɖe ɖoɖo nu

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa PET / PE laminated films, PET / EVOH / PE mɔxenu films, PET nuɖuɖu agbawo, CPET agbawo, nutsyɔnu films, PET agbalẽwo, PVC agbalẽwo kple nuɖuɖu-babla nu siwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ thermoforming dɔwɔƒewo, lãwo dzralawo, ƒumelãwo ƒe bablawo, cheese wɔlawo, nuɖuɖu-bablɛwo trɔlawo, nusiwo wotsɔ tso duta vɛ kple wo mamalawo kple nusiwo woatsɔ awɔ dɔe tiatia, kpɔɖeŋu dodokpɔ, wɔwɔ ɖe ɖoɖo nu, nyonyome me toto kple nusiwo wobla ɖe duta.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu

HSQY ƒe Nubablɛwo ƒe Adzɔnuwo Ðeɖefia