HSQY Transparent Kɔlɔ 0.18mm 0.8mm-PC Rigid Film dɛn

HSQY transparent Kɔlɔ PC Rigid Film 0.18mm-0.8mm

HSQY transparent kala PC rigid film na 100% nyu polycarbonate matirial. I fayn fɔ PC kad matirial, polycarbonate ɔvlay film, plastic kad mek, laser engraving kad, laser printin kad, sikyɔriti kad ɛn ɔda prɛsishɔn plastic film aplikeshɔn dɛn.

Polikabɔnɛt rigid film de gi ay transparency, fayn fayn impak rɛsistɛns, strɔng dimɛnshɔnal stebiliti, gud ɔt rɛsistɛns ɛn rili printin pefɔmɛns. Dɛn kin gi am insay transparent, pɔslɛn wayt, milk wayt ɛn kɔstɔmayt kɔlɔ dɛn wit smol, frɔst, glos ɔ mat sɔfays.

PC Rigid Film Prodakt Spɛsifikeshɔn dɛn

HSQY de saplae polycarbonate overlay film ɛn PC kad matirial insay bɔku tiknes, kɔlɔ ɛn surface finish. Dɛn kin arenj di kɔstɔm tik, kɔlɔ, sɔfa ɛn printin kɔmpitibliti akɔdin to wetin di kɔstɔma nid.

Ki Advantej fɔ Polikabɔnɛt Rigid Film

• di ay layt transmishכn, we de rich 88% pan di sem tik we di jεnarכl glas de.

• Eksɛlɛnt impak resistans, lɛk 80 tɛm pas di wan we glas gɛt.

• Weta ɛn UV resistans fɔ lɔng tɛm pefɔmɛns ɛn ridyus yɔlɔ.

• Tεmpratura rεsistεns de frכm -40°C to +120°C.

• Layt wet strɔkchɔ, na lɛk 1/12 nɔmɔ pan di wet fɔ glas wit di sem tik.

• I kin kol bɛn, thermoformed ɛn prosɛs fɔ difrɛn aplikeshɔn dɛn.

• Gud flame resistans wit B1 faya pefomans retinj.

• Eksɛlɛnt fizik, mɛkanikal, ilɛktrik ɛn ɔt pefɔmɛns as injinɛri plastic.

PC Sheet ɛn PC Film Matirial Aplikeshɔn dɛn

Polikabɔnɛt matirial de yuz bɔku bɔku wan fɔ ilɛktronik aplayans, mɛkanikal ikwipmɛnt, mɛdikal ikwipmɛnt, kɔnstrɔkshɔn ɛn kad mek. PC rigid films na spɛshal wan fɔ kad ɔvlay, printin, laser engraving ɛn sikyɔriti kad aplikeshɔn.

• Ilɛktronik aplayans dɛn: insulation plɔg-in, kɔyl freym, tyub sɔkɛtɛ ɛn bateri shel.

• Mekanikal ikwipmɛnt: gia, rɛk, bolt, lev, krankshaft, kɔva ɛn haus.

• Medikal ikwipmɛnt: kɔp, tyub, bɔtul, dɛnt ikwipmɛnt ɛn famasi ikwipmɛnt pat dɛn.

• Kɔnstrɔkshɔn: olo sheet, grin haus glazing, protɛkshɔn panɛl ɛn bildin matirial.

• Fɔ mek kad: plastic kad, laser engraving kad, laser printin kad ɛn sikyɔriti kad.

Pak di PC Rigid Film

HSQY de gi protɛktiv pak fɔ PC rigid film ɛn polycarbonate sheet fɔ ridyus sɔfayz skrat, difɔmeshɔn ɛn transpɔt damej. Yu kin arenj fɔ pak di tin dɛn we yu want fɔ mek akɔdin to di sheet saiz, di fɔmat fɔ di rol ɛn di tin dɛn we yu nid fɔ ɛkspɔt.

Di Kɔmni Introdyushɔn

Changzhou Huisu Qinye Plastic Group Co., Ltd. spɛshal pan di prodakshɔn ɛn sɛl fɔ PC bod, PC ɛnjɔymɛnt bɔd, PC difyushɔn bɔd ɛn PC shit prɔsesin. Prɔsesin savis dɛn inklud engraving, bɛnd, prɛsishɔn kɔt, panch, polish, bond, thermoforming, blista fɔm insay 2.5*6 mita, ABS tik plet blista, UV flatbed printin ɛn skrin printin.

Wit mɔ pas 16 ia ɛkspɔt ɛkspiriɛns, HSQY de gi ay-kwaliti PC sheets , PC rigid films ɛn kɔstɔmayz polycarbonate matirial sɔlvishɔn to kɔstɔma dɛn ɔlsay na di wɔl.

Yu gɛt rizin fɔ pik polycarbonate bod ɛn PC rigid film frɔm Huisu Qinye Plastic Group.

FAQ we dɛn kin aks

Wetin dɛn kin yuz PC rigid film fɔ?

PC rigid film de yuz fɔ mek plastic kad, polycarbonate ɔvlay film, laser engraving kad, laser printin kad, sikyɔriti kad, ilɛktronik insuleshɔn, printin ɛn ɔda prɛsishɔn plastic film aplikeshɔn dɛn.

Wetin na di faya raytin fɔ polycarbonate sheet?

Polycarbonate matirial kin rich B1 faya retinj, we de gi gud flame resistance fɔ aplikeshɔn dɛn we nid sef injinɛri plastic matirial.

Yu tink se polikabɔnɛt nɔ kin brok?

Polycarbonate na tin we nɔ de ambɔg bɔku impak ɛn bɔku tɛm dɛn kin tɔk bɔt am se i nɔ kin brok we dɛn de yuz am nɔmal wan. Bɔt, nɔ matirial nɔ kin gɛt garanti fɔ 100% we nɔ go brok ɔnda ekstrim kɔndishɔn lɛk eksplɔshɔn ɔ balistik impak.

A kin kɔt polikabɔnɛt sheet dɛn na os?

Yɛs. Yu kin kɔt polikabɔnɛt shit wit tul dɛn lɛk jigsaw, band saw ɔ fret saw. HSQY de gi kɔt-to-sayz savis bak fɔ ɛp kɔstɔma dɛn fɔ ridyus di wok we dɛn de du fɔ prosɛs.

Aw a fɔ klin di polikabɔnɛt sheet?

Klin di polikabɔnɛt sheet wit wam sop wata ɛn wan saf klos. Nɔ yuz abrasive matirial, harsh solvent ɔ rough klin tul bikɔs dɛn kin pwɛl di surface.

Wetin na di difrɛns bitwin polikabɔnɛt ɛn akrilik?

Polikabɔnɛt gɛt bɔku ay impak rɛsistɛns ɛn bɛtɛ faya pefɔmɛns pas akrilik. Akrilik strɔng pas glas bɔt i kin brok ɔ brok ɔnda fɔs, we polikabɔnɛt fayn fɔ yuz we nɔ gɛt impak.

Yu tink se PC sheet dɛn kin chenj in kɔlɔ as tɛm de go?

Wit wan transparent UV protɛktiv layt, PC sheet dɛn kin rɛsist diskɔlɔreshɔn ɛn yɔlɔ fɔ yuz fɔ lɔng tɛm na do. Savis layf dipen pan matirial gred, UV protɛkshɔn, instɔleshɔn ɛnvayrɔmɛnt ɛn mentenɛns.

Us infɔmeshɔn dɛn nid fɔ kot?

Duya gi di tik we yu nid, kɔlɔ, di say we yu want fɔ dɔn, di sayz ɔ rol fɔmat, di aplikeshɔn, di tin dɛn we yu nid fɔ print, di kwantiti ɛn di say we yu want fɔ go. HSQY kin rεkomεnd fayn PC rigid film כ PC shit sכlushכn.