0.3mm & 0.4mm Rigid Polikarbonayt Kad Kor Film

HSQY 0.3mm ɛn 0.4mm rigid polycarbonate kad film na fɔ laminated ID kad, smart kad, kad kɔr, drayva laysens kad, paspɔt-rilayt kad strɔkchɔ ɛn ɔda pɔshɔnal kad-manufakchurin aplikeshɔn usay dimɛnshɔnal stebiliti, printin, lamineshɔn ɛn pɔsnalayzeshɔn pefɔmɛns impɔtant.

Di gej dɛn we dɛn sho na dis pej na 0.3mm ɛn 0.4mm. Di brada listed PC kad-film rɛnj inklud bak 0.05mm, 0.06mm, 0.075mm, 0.10mm, 0.125mm, 0.175mm ɛn 0.25mm fɔ difrɛn layers insay laminated kad kɔnstrɔkshɔn dɛn.

Di kɔlɔ dɛn we de na di sɔs-list inklud pɔslɛn wayt, milk wayt ɛn supa klia, wit glos, fayn mat ɛn velvet sɔfays opshɔn dɛn. Di wan dɛn we de bay fɔ spɛsifa if di layt we dɛn nid na kɔr, layt we dɛn kin print, layt we transparent ɔ layt-pɔsɔnalayzeshɔn layt bifo dɛn mek bɔku ɔda.

0.3mm–0.4mm Rigid PC Kad Film Vidio

Polikabɔnɛt kad film imej dɛn

0.3mm & 0.4mm PC kad film spesifikasi

Wetin Na Polikabɔnɛt Kad Kɔr Film?

Polycarbonate card film na wan tin rigid PC matirial we dɛn kin yuz fɔ mek multilayer kad kɔnstrɔkshɔn. Dipen pan di kad dizayn, difrɛn PC layers kin sav as opaque kor, printable layers, transparent protective layers ɔ laser-personalization layers.

We dɛn de mek kad, dɛn kin gɛda kɔmpitabl PC layers ɛn laminate ɔnda kɔntrol prɔsesin kɔndishɔn dɛn. Dɔn dɛn kin du printin, pɔsnalayzeshɔn, panch, chip ɔ ɛntena intagreshɔn ɛn ɔda manufakchurin ɔpreshɔn dɛn akɔdin to di kad dizayn we dɔn dɔn.

Di rayt fim gred impɔtant. Wan wayt kad-kɔr fim, transparent fim, printable PC film ɛn laserable PC film nɔ fɔ trit ɔtomɛtik wan lɛk di sem matirial.

0.3mm vs. 0.4mm Polikarbonat kad film

Ɔl tu 0.3mm ɛn 0.4mm na ficha gej fɔ dis prodak pej, bɔt di kɔrɛkt chuk dipen pan di kɔmplit kad-layer stak ɛn target finish kɔnstrɔkshɔn pas tiknes nɔmɔ.

No wan yunivasal tik nɔ de we de aplay to ɛvri aydentiti, faynɛns ɔ smat-kad program. Di wan dɛn we de bay fɔ gi di kɔmplit target kad kɔnstrɔkshɔn usay i pɔsibul.

PC Film fɔ Laminated ID Kad Kɔnstrɔkshɔn

Polikabɔnɛt kad kin yuz bɔku layers wit difrɛn wok dɛn. Wan projɛkt kin inklud klia ɔda layers, print layers, opaque kor film ɛn funkshɔnal pɔsnalayzeshɔn layers dipen pan di dɔkyumɛnt dizayn.

Saksesful lamination dipen pan kompitibiliti bitwin di PC layers togeda wit temperechur, preshos, dwell taim, surface kondishon en di total stak tiknes.

Fɔ nyu kad projɛkt, gi di kɔmplit layt stak, target finish tiknɛs ɛn kɔrɛnt lamination paramita dɛn we yu de aks fɔ film rɛkɛmɔndeshɔn.

PC Kad Kor Film fɔ ID Kad dɛn

ID kad na wan pan di praymar aplikeshɔn dɛn we dɛn rayt fɔ dis rigid polycarbonate film. Yu kin pik wayt ɔ klia PC layers akɔdin to di kad akitɛkɛt, printin, pɔsnalayzeshɔn ɛn vijual rikwaymɛnt dɛn.

Fɔ aydentifikeshɔn-kad prɔjek, di wan dɛn we de bay fɔ spɛsifa di kayn kad, di layt pozishɔn, di tik we dɛn nid, di say we dɛn fɔ dɔn di sɔfa, di opasiti ɔ transmishɔn, di we aw dɛn de print, di we aw dɛn de print, di we aw dɛn de mek di layt ɛn di kɔndishɔn dɛn we dɛn fɔ lamin.

Polycarbonate Film fɔ Drayva Laysens Kad dɛn

Rigid PC film kin evalyu fɔ drayva laysens kad strɔkchɔ usay dɛn spɛsifa polycarbonate as pat pan wan laminated kad sistem.

Di rayt matirial gred fɔ pik akɔdin to di dɔkyumɛnt program in printin, pɔsnalayzeshɔn, durabiliti, sikyɔriti ɛn rigyuletɔri rikwaymɛnt dɛn.

Polikabɔnɛt Film fɔ Paspɔt Data Strukchɔ dɛn

Dɛn rayt di paspɔt aplikeshɔn dɛn na di prɔdak pej we de naw. Usay dɛn de yuz polikabɔnɛt na paspɔt data strɔkchɔ, di fim sɛlɛkshɔn dipen pan di kɔmplit maltilayer dizayn ɛn di pɔsnalayzeshɔn prɔses we dɛn nid.

Projɛkt dɛn we gɛt rigyulayt dɔkyumɛnt rikwaymɛnt dɛn fɔ spɛsifa di aplikebul program standad ɛn aks fɔ dɔkyumentri fɔ di ɛksaktɔl PC gred pas fɔ abop pan jenɛrik kad-fim data.

Polikarbonɛt Film fɔ Smat Kad Kɔr

Smart kad na ɔda aplikeshɔn we de na di list we gɛt sɔs. Wan smat-kad kɔnstrɔkshɔn kin nid fɔ tink bɔt chip mɔdyul dɛn, ɛntena ɔ inlay pozishɔn, kad tiknɛs ɛn lamineshɔn kɔndishɔn dɛn apat frɔm di PC film spɛsifikɛshɔn.

Gi di kɔmplit smat-kad kɔnstrɔkshɔn ɛn prɔsesin rikwaymɛnt dɛn we yu de ɛvaluet 0.3mm ɔ 0.4mm matirial.

Polikarbonɛt Film fɔ Bank Kad Kɔr

Bank kad kɔr de insay di prɔdak aplikeshɔn dɛn we de naw. Polycarbonate fɔ pik ɔl usay dɛn spɛsifa PC fɔ di kad kɔnstrɔkshɔn ɛn prodakshɔn prɔses we dɛn want.

Faynanshɛl-kad manifakta dɛn fɔ difayn matirial tayp, tik, printin, laminɛshɔn, chip intagreshɔn ɛn ɛni pefɔmɛns dɔkyumentri we dɛn nid bifo dɛn gri fɔ di fim.

Laserable vs. Standart Polikarbonɛt Kad Film

Laser engraving de list bitwin di prɔsesin dairekshɔn fɔ dis prodak famili. Bɔt, dɛn fɔ trit laser pɔsnalayzeshɔn as gred-spɛsifi k rikwaymɛnt.

If laser personalization nid fɔ de, validet di aktual prodakshɔn film wit di intended laser sistem ɛn kɔmplit laminated kad kɔnstrɔkshɔn bifo volyum bay.

Porcelain White, Milk White ɛn Supa Klia Opshɔn dɛn

Di kɔrɛnt prodak spesifikeshɔn list pɔslɛn wayt, milk wayt ɛn supa klia PC fim.

Fɔ kɔntrol kad program dɛn, spɛsifa di opasiti, waytnɛs, transmishɔn ɔ aprɔv sampul apinans we dɛn nid pas fɔ ɔda jɔs bay di jenɛral kɔlɔ nem.

Glossy, Fayn Mat ɛn Vɛlvet Surface dɛn

Surface finish de afɛkt di apinɛns, printin, handel, lamination ɛn di fainal taktil fil fɔ wan kad layt. Di kɔrɛnt prodak famili de list glos, fayn mat ɛn velvet opshɔn dɛn.

Fɔ prɛsishɔn lamination projɛkt, spɛsifa di say we yu nid na ɛni say na di fim if di tu fes dɛn gɛt difrɛn wok dɛn.

Ofset Printin pan PC Kad Film

Ɔfset printin de pan di opshɔn dɛn we dɛn de yuz naw fɔ prosɛs. Printin pefɔmɛns dipen pan di ɛksaktɔl film sɔfays, ink sistɛm, di kɔndishɔn fɔ kɔrɛkt, print sayd ɛn di lamination prɔses we de afta dat.

Di wan dɛn we de mek kad fɔ tɛst ink adheshon, kɔlɔ riprodakshɔn ɛn post-laminɛshɔn apinans yuz di aktual prodakshɔn-grɛd fim bifo ful-volyum printin.

Silk-Skrin Printin pan Polikabɔnɛt Film

Silk-skrin printin de bak na di list fɔ dis PC kad-fim rɛnj ɛn dɛn kin yuz am fɔ sɔm grafik dɛn, funkshɔnal print eria ɛn kad-manufakchurin prɔses.

Spɛsifik ink kemistri, print-sayd sɔfays, drying ɔ curing prɔses ɛn lamination rikwaymɛnt dɛn we yu de evaluate kɔmpatibiliti.

Flatness ɛn Kad Laminɛshɔn

Di sɔs prodak infɔmeshɔn de aydentify flatnɛs as impɔtant kwaliti fɔ kad lamination.

Fɔ prodakshɔn program usay flatnɛs, kɔl ɔ dimɛnshɔnal stebiliti impɔtant, inklud mɛzhɔbal akseptɛns krayteria insay di spɛsifikɛshɔn fɔ bay pas fɔ abop pan diskrɔtif tɛm dɛn nɔmɔ.

Rol stɔrɔj, wayndin kɔndishɔn, tɛmpracha, humiditi ɛn kɔnvɔyt kɔndishɔn kin inflɔws bak aw fɔ handle di tɛm we dɛn de prodyuz kad dɔŋstrim.

Impekt ɛn Tear Resistance

Impact ɛn tear resistance de list bitwin di kwaliti dɛm fɔ di kɔrɛnt PC kad-film rɛnj.

We kad program nid fɔ gɛt patikyula mɛkanikal rizɔlt, bɛnd tɛst, impak tɛst ɔ durabiliti rikwaymɛnt, aks fɔ tɛknikal data fɔ di ɛksaktɔ tik ɛn gred we dɛn de gi.

PC Kad Film Aplikeshɔn Ɛgzampul

Aw fɔ Spɛsifik 0.3mm & 0.4mm PC Kad Film

Di tin dɛn we yu nid fɔ handle ɛn pak di rol

Kad-film sɔfays fɔ protɛkt frɔm skrat, dɔst ɛn handel kɔntaminɛshɔn we dɛn de kip, kɔnvɔyt ɛn transpɔt.

Fɔ rol ɔda, di wan dɛn we de bay fɔ spɛsifa di rol wit, di kɔr insay dayamita, maksimal rol ɔdasay dayamita ɔ wet, sɔfayz protɛkshɔn, lɛbl infɔmeshɔn ɛn palet rikwaymɛnt usay dɛn paramita ya de afɛkt di ikwipmɛnt dɛn we de dɔŋstrim.

Stɔr ɛn handle di fim akɔdin to wetin di PC gred we yu dɔn pik ɛn daunstrim kad-prɔdakshɔn prɔses nid.

Sɛtifiket ɛn Dokumɛnt

Di prodak pej we de naw de sho SGS, ISO 9001:2008, RoHS ɛn REACH dɔkyumentri. Di wan dɛn we de bay fɔ aks fɔ di kɔpi dɛn we de naw ɛn chɛk di ɔganayzeshɔn we de gi di kɔpi, di validiti, di skɔp ɛn di aplikebiliti fɔ di ɛksaktɔl PC kad-fim gred we dɛn de ɔda.

HSQY Globɛl Ɛgzibishin dɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt PC Card Film

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae polycarbonate film ɛn plastic sheet matirial matirial to kad manifakta, printin kɔmni, laminator, kɔnvɔta, distribyushɔn ɛn ɔda pɔshɔnal industrial bayer.

Fɔ 0.3mm ɛn 0.4mm PC kad-film projɛkt, gi di kad kɔnstrɔkshɔn, layt fɛnshɔn, tik ɛn tolɛreshɔn we dɛn nid, kɔlɔ, sɔfa, printin ɔ laser-pɔsɔnalayzeshɔn rikwaymɛnt, rol dimɛnshɔn, kwantiti ɛn ples fɔ go so dat dɛn go ebul fɔ rivyu di aprɔpriet spɛsifikɛshɔn.