0.5mm Polikabɔnɛt Film Rol fɔ Print ɛn Kad Aplikeshɔn
HSQY polycarbonate film roll na fɔ mek plastic kad, polycarbonate ɔvlay aplikeshɔn, laser engraving, laser printin ɛn ɔda printin ɔ kɔnvɔyt prɔses we nid PC film matirial.
Di matirial opshɔn dɛn we de inklud transparent, pɔslɛn wayt ɛn milk wayt polikabɔnɛt, wit smol, frɔst, glos ɛn mat sɔfays fɔ difrɛn printin, lamination ɛn finish-kad rikwaymɛnt dɛn.
Fɔ 0.5mm polycarbonate film rol inkyɔri, di wan dɛn we de bay fɔ gi di rol ɔ sheet matirial fɔmat we dɛn nid, wit, sɔfayz finish, kɔlɔ, printin prɔses, ɛnd-yuz aplikeshɔn ɛn ɔda kwantiti fɔ kɔnfɔmeshɔn.
Rikwest 0.5mm PC Film Prayz Rikwest fɔ wan Sampul
Di Spɛsifikeshɔn dɛn fɔ di Prodak
| Prɔpati |
Spɛsifikeshɔn |
| Di Nem fɔ Prodak |
PC Card Material , polikabɔnɛt ɔvlay film |
| Tin dɛn |
100% nyu matirial polycarbonate |
| Kɔlɔ |
posin wayt, milk wayt,Transparent |
| Sho |
smol, frɔst Glossy, Mat |
| Tiknɛs rɛnj |
0.05/0.06/0.075/0.10/0.125/0.175/0.25mm ɔ we dɛn kɔstɔmayz |
| We |
Kalɛnda we dɛn de du |
| Aplay fɔm |
plastic kad mek, Laser engraving kad,Laser printin kad |
| Di Opshɔn dɛn fɔ Print |
CMYK Ɔfset Printin, Silk-skrin printin, UC sikyɔriti printin, Laser printin |
Baya dɛn we nid spɛsifikɛshɔn ausayd di tiknes rɛnj we dɛn dɔn list fɔ gi di film tiknes, fɔmat ɛn aplikeshɔn we dɛn nid fɔ kɔnfɔm bifo dɛn mek ɔda.
Send Yu PC Film Spɛsifikeshɔn
Polikarbonɛt film Rol fɔ B2B Kɔnvɔyt
Rol-fɔmat polycarbonate film kin sɔpɔt kɔntinyu fɔ print ɛn kɔnvɔyt ɔpreshɔn usay manifakta dɛn nid PC matirial fɔ kad prodakshɔn, ɔvlay, print kɔmpɔnɛnt ɔ daunstrim fabrikeshɔn.
Di tin dɛn we dɛn nid fɔ bay fɔ difayn di fayn tik, di rol wit, di fɔmat we di rol fɔmat, di sɔfa tɛkstɔr, di kɔlɔ ɛn di we aw dɛn de print so dat dɛn go ebul fɔ evalyu di matirial agens di pɔsin we bay in prodakshɔn ikwipmɛnt.
| Rol Rikwaymɛnt |
Infɔmeshɔn fɔ Gi |
| Tik we i tik |
Rikwayd finish film tiknes |
| Rol Width we yu de yuz |
Rikwayd rol wit fɔ yu kɔnvɔyt ikwipmɛnt |
| Rol Fɔmat |
Rikwayd rol kɔnfigyushɔn ɛn pak rikwaymɛnt dɛn |
| Kɔlɔ |
Transparent, pɔslɛn wayt ɔ milk wayt |
| Sho |
Smɔl, frɔst, glos ɔ mat |
| Di we aw dɛn de print |
CMYK ɔfset, silk-skrin, UC sikyɔriti ɔ laser printin |
| Aplay fɔm |
Kad matirial, ɔvlay film, laser engraving ɔ ɔda kɔnvɔyt aplikeshɔn |
Di Opshɔn dɛn fɔ Print
| Printing Method |
Bayer Kɔnsidɛreshɔn |
| CMYK Ɔfset Printin |
Konfam ink sistem, printin sayd ɛn daunstrim prɔsesin |
| Silk-skrin we dɛn de print |
Kɔnfɛm ink kɔmpatibiliti ɛn di fim sɔfays we yu dɔn pik |
| UC Sekyuriti Printin we dɛn de print |
Spɛsifik sikyɔriti-printin prɔses ɛn kad kɔnstrɔkshɔn |
| Laser Printing we dɛn de print |
Gi laser-printing ɔ laser-processing rikwaymɛnt dɛn |
Kɔmɛshɔnal printin pefɔmɛns fɔ tɛst yuz di bayer in aktual ink, ikwipmɛnt, kɔring prɔses ɛn daunstrim kɔnvɔtin kɔndishɔn bifo bɔlk prodakshɔn.
Di Opshɔn dɛn fɔ Finish di Surface
| Sɔfays |
Sɛlɛkshɔn Kɔnsidɛreshɔn |
| Fayn |
Fɔ aplikeshɔn dɛn we nid fɔ gɛt wan smol PC film sɔfays |
| Frosted we dɛn mek |
Fɔ aplikeshɔn dɛn we nid fɔ gɛt tɛkstɔr ɔ difyuz apinans |
| Glossy, we de shayn |
Fɔ wan ay-glos vijual finish |
| Mat |
Fɔ aplikeshɔn usay dɛn kin lɛk fɔ mek i luk lɛk se i nɔ gɛt bɛtɛ glare |
Polikabɔnɛt Matirial Pɔfɔmɛnshɔn
High Light Transmission: I go rich 88% dat na di sem tik we di jenɛral glas gɛt.
Impact Resistance: Eksɛlɛnt impak resistans, we dɛn rayt am 80 tɛm pas di wan we glas gɛt.
Weta ɛn UV Rɛsistɛns: Tɛmpratura rɛsistɛns rɛnj na 40°C ~ +120°C, wit wan ɔltra vayolɛt kɔɛkstrud fim na di sheet matirial sɔfays. I kin ɛp fɔ mek di rɛsin nɔ taya ɔ fɔ mek i yɔlɔ bikɔs ɔf ɔltra vayolɛt.
Layt Weyt: Dɛn rayt am na 1/12 nɔmɔ pan di wet fɔ glas we gɛt di sem tik.
Fɔmabiliti: Di matirial kin kol bɛnt ɛn thermal shep fɔ fayn aplikeshɔn.
Flame Resistance: Dɛn rayt di ay faya pefɔmɛns raytin as Klas B1.
Saund ɛn Ɔt Insuleshɔn: Dɛn tɔk bak se polikabɔnɛt de gi sawnd ɛn tɛmal insuleshɔn pefɔmɛns.
Ɛnjinia Pɔfɔmɛnshɔn: Polikabɔnɛt de jɔyn fizik, mɛkanikal, ilɛktrik ɛn tɛmal prɔpati fɔ injinɛri aplikeshɔn dɛn.
Polikabɔnɛt Film Aplikeshɔn dɛn
Plastik Kad Manufakchurin: Di list prodak aplikeshɔn dɛn inklud plastic kad mek, kad matirial ɛn polycarbonate ɔvlay film.
Laser Engraving and Printing: Laser engraving kad ɛn laser printin kad aplikeshɔn dɛn de insay di prɔdak spɛsifikɛshɔn.
Ilɛktronik Aplayans: Dɛn kin yuz polikabɔnɛt fɔ mek insulin plɔg-in, kɔyl freym, tiub sɔkɛtɛ ɛn bateri shel fɔ fayn aplikeshɔn dɛn.
Mɛkanikal Ikwipmɛnt: Dɛn kin yuz polikabɔnɛt fɔ sɔm gia dɛn, rɛk, bolt, lev, krankshaft, haus, kɔva, freym ɛn ɔda tin dɛn.
Medikal Ikwipmɛnt: Mɛdikal aplikeshɔn dɛn nid fɔ gɛt di rayt matirial gred ɛn aplikeshɔn-spɛsifi k tɛknikal ɔ rigyuletɔri dɔkyumentri.
Kɔnstrɔkshɔn: Dɛn kin yuz polikabɔnɛt bak fɔ du fayn grin haus ɛn kɔnstrɔkshɔn aplikeshɔn dɛn.
Polikabɔnɛt Prodakt Imej dɛn
Wetin Baya dɛn Fɔ Kɔnfɛm Bifo Dɛn Ɔda
| Rikwaymɛnt |
Infɔmeshɔn fɔ Gi |
| Tik we i tik |
Rikwayd PC film tiknes |
| Fɔmat |
Rol ɔ sheet matirial rikwaymɛnt |
| Rol Width / Shit Sayz |
Dimɛnshɔn dɛn we dɛn nid fɔ prodakshɔn ikwipmɛnt |
| Kɔlɔ |
Transparent, pɔslɛn wayt ɔ milk wayt |
| Sho |
Smɔl, frɔst, glos ɔ mat |
| Fɔ print |
CMYK ɔfset, silk-skrin, UC sikyɔriti ɔ laser printin |
| Aplay fɔm |
Kad matirial, ɔvlay film, laser engraving kad ɔ ɔda ɛnd yus |
| Ɔmɔs |
Sampul, trayal ɔda ɛn bɔlk kwantiti |
| Usay yu de go |
Kɔntri, pɔt ɛn dilivrɛshɔn rikwaymɛnt dɛn |
Gɛt wan Polikabɔnɛt Film Kɔt
Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm
Wetin dɛn kin yuz fɔ mek polikabɔnɛt fim rol?
Di aplikeshɔn dɛn we dɛn rayt na di list inklud plastic kad manufakchurin, polycarbonate ɔvlay film, laser engraving kad ɛn laser printin kad.
Us tiknes dɛn de na di list fɔ di polycarbonate kad matirial?
Di prodak spesifikeshɔn list 0.05mm, 0.06mm, 0.075mm, 0.10mm, 0.125mm, 0.175mm ɛn 0.25mm, wit kɔstɔmayz tiknɛs dɛn we de fɔ tɔk bɔt.
A kin aks fɔ 0.5mm polycarbonate film rol?
Baya dɛn we nid 0.5mm matirial fɔ gi di rol wit we dɛn nid, kɔlɔ, sɔfays, printin prɔses, aplikeshɔn ɛn kwantiti so dat dɛn go kɔnfɔm di ɛksaktɔl spɛsifikɛshɔn bifo dɛn ɔda.
Us kɔlɔ dɛn de?
Di kala opshɔn dɛn we de na di list na pɔslɛn wayt, milk wayt ɛn transparent.
Us surface finish dɛn de we dɛn kin yuz?
Surface opshɔn dɛn inklud smol, frosted, glossy ɛn mat.
Yu tink se dɛn kin print di fim?
Di printin opshɔn dɛn we de na di list inklud CMYK ɔfset printin, silk-skrin printin, UC sikyɔriti printin ɛn laser printin.
Yu tink se di tin we dɛn yuz fɔ mek di tin dɛn we dɛn dɔn yuz fɔ mek kad dɛn we dɛn kin yuz lɛsa?
Laser engraving kad aplikeshɔn dɛn de insay di prɔdak spɛsifikɛshɔn. Di wan dɛn we de bay fɔ gi dɛn laser-prosɛsin rikwaymɛnt ɛn di las kad kɔnstrɔkshɔn bifo dɛn prodyuz bɔku bɔku wan.
Wetin na di layt transmishɔn fɔ di matirial?
Layt transmishכn dεn list am to 88% dat fכ di sem tiknes fכ jεnarכl glas. Aktual pefomans kin difrεn wit tik, kכla εn sכfa.
Us impak resistans de na di list?
Dɛn rayt di impak rɛsistɛns pan 80 tɛm pas di wan we glas gɛt. Projɛkt dɛn we nid fɔ gɛt difayn tɛst valyu fɔ kɔnfɔm di aplikebul tɛknikal data fɔ di matirial we dɛn dɔn pik.
Us faya rɛytin de na di list?
Klas B1 de na di list insay di matirial infɔmeshɔn. If fɔmal faya kɔmplians nid fɔ de, kɔnfɔm di aplikebul tɛst standad ɛn dɔkyumentri fɔ di ɛksaktɔl fim gred ɛn tiknes.
Yu tink se polikabɔnɛt nɔ kin brok atɔl?
Polikabɔnɛt de gi ay impak rɛsistɛns, bɔt dɛn nɔ fɔ trit am lɛk se i nɔ go brok ɔl ɔnda ɛvri lod, eksplɔziv ɔ balistik kɔndishɔn.
Yu tink se dɛn kin kɔt polikabɔnɛt wit kɔmɔn tin dɛn?
Di prodak infɔmeshɔn de list jigsaw, band saw ɛn fret saw fɔ fayn kɔt aplikeshɔn dɛn. Dɛn fɔ pik di we aw dɛn de kɔt akɔdin to di tik we di matirial tik ɛn di tin dɛn we dɛn nid fɔ mek di pat we dɔn dɔn.
Aw dɛn fɔ klin polikabɔnɛt?
Yuz wam sop wata wit saf klos ɛn nɔ yuz abrasive klin matirial dɛn we go afɛkt di say we yu de.
Wetin na di difrɛns bitwin polikabɔnɛt ɛn akrilik?
Polycarbonate na jεnarali sεlekt usay big impak rεsistεns εn prכsεsin fleksibiliti nid. Eksakt mɛkanikal, optik ɛn flaym pefɔmɛns fɔ kɔmpia yuz gred-spɛsifi k tɛknikal data.
Yu tink se polikabɔnɛt nɔ kin mek di kɔlɔ chenj?
Di matirial infכmeshכn de dεskrεb wan ultraviolet protεktiv layt we dεn intend fכ ridyus rεsin fכ taya כ yכlכ we kכz fכ UV εkspos. Kɔnfɛm di gred we dɛn nid fɔ UV-rɛsistant fɔ di aplikeshɔn we dɛn want fɔ yuz.
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi di tiknes we yu nid, di rol wit ɔ sheet matirial saiz, kɔlɔ, sɔfayz finish, we fɔ print, aplikeshɔn, kwantiti ɛn di say we yu want fɔ go.
Fɔ pak tin dɛn
Di Introdyushɔn fɔ di Kɔmni
Changzhou Huisu Qinye Plastic Group Co., Ltd. spɛshal pan di prodakshɔn ɛn sɛl fɔ PC bod, PC ɛnjɔymɛnt bɔd, PC difyushɔn bɔd ɛn PC bod prɔsesin.
Prosesin kapabiliti inklud engraving, bend, prɛsishɔn kɔt, panch, polish, bond, thermoforming, blista prɔsesin, UV flatbed printin ɛn skrin printin. Dɛn kin prosɛs drɔin ɛn sampul dɛn bak akɔdin to wetin di kɔstɔma nid.
HSQY gɛt pas 16 ia ɛkspɔt ɛkspiriɛns fɔ saplae PC sheet matirial s to kɔstɔma dɛn ɔlsay na di wɔl.
Kontakt HSQY fɔ Sampul ɛn Prayz
