Frosted Polycarbonate shit fɔ Prayvesi & Intɛriɔ Panɛl dɛn

Frosted Polycarbonate shit fɔ Prayvesi & Intɛriɔ Panɛl dɛn

HSQY frosted polycarbonate sheet matirial de kam togɛda wit wan mat ɔ frosted surface wit di tafness of solid polycarbonate, we de gi ridyus dairekt visibiliti we i de alaw layt fɔ pas tru di panɛl.

I de insay 1.5-12mm tik ɛn waid frɔm 1220mm to 2100mm, di sheet matirial fayn fɔ prayvet patishɔn, batrum skrin, intɛriɔ dɛkɔreshɔn, dɛkɔretiv panɛl, siling, san shed ɛn ɔda aplikeshɔn dɛn we nid fɔ gɛt translucent ɔ visually obscured surface.

Klia, smoky, grey, blu, grɛn, brawn ɛn kɔstɔmayz kɔlɔ dɛn de na di HSQY rɛnj we de naw. Di las lɛvɛl fɔ prayvet pat, layt transmishɔn ɛn vijual apinɛns dipen pan di kɔlɔ, tik ɛn di frɔst sɔfays we yu dɔn pik.

Frosted Polycarbonate shit Spɛsifikeshɔn dɛn

Spɛsifikeshɔn Notis: Di kɔrɛnt sɔs de list '600mm' fɔ lɔng we tik na ≥4.5mm bɔt i nɔ de gi kɔmplit lɔng rɛnj. Kɔnfɛm standad sheet matirial lɔng, kɔt-to-sayz kapabiliti ɛn dimɛnshɔnal tolɛreshɔn fɔ di tik we dɛn nid bifo yu ɔda.

Wetin Na Frɔst Polycarbonate shit ?

Frosted polycarbonate na wan solid PC sheet matirial wit mat ɔ frosted surface we dɛn mek fɔ ridyus dairekt vijual klia tru di panɛl we i de mentɛn yusful layt transmishɔn.

Nɔ lɛk kɔvɛnshɔnal klia polikabɔnɛt, we dɛn kin pik we di visibiliti tru di sheet matirial impɔtant, dɛn kin yuz frɔst sɔfays we dɛn kin lɛk prayvet pat, ridyus glare ɔ dɛkɔretiv translucent apinans.

Di las rizɔlt dipen pan di sheet matirial kɔlɔ, tik, tɛkstɔr ɛn layt kɔndishɔn na ɛni say na di panɛl. Di wan dɛn we de bay fɔ evalyu di sampul dɛn usay dɛn nid fɔ gɛt wan patikyula prayvesi lɛvɛl.

Prayvesi We Nɔ Blɔk Layt Kɔmplit

Wan pan di men rizin dɛn fɔ spɛsifa wan frɔst polikabɔnɛt panɛl na fɔ ridyus di dairekt visibiliti we dɛn de kip di layt we dɛn transmit.

Dis de mek frosted PC yusful na spes usay wan opaque panɛl go blok tumɔs layt bɔt wan klia transparent sheet matirial go gi insufishɛnt prayvet pat.

Fɔ prɔjek dɛn we gɛt difayn prayvesi rikwaymɛnt, spɛsifa if silhouettes, kɔlɔ ɔ ɔbjɛkt ditil dɛn kin stil de fɔ si ɛn evalyu di panɛl ɔnda di frɔnt ɛn bak layt kɔndishɔn dɛn we dɛn want.

Matt Surface fɔ Ridyus Glare

Mat surface de ridyus shap surface riflekshɔn we yu kɔmpia am wit wan smol glossy panɛl ɛn i kin gi wan soft vijual apinans na intɛriɔ spɛs.

Dis kwaliti yusful fɔ patishɔn, dɛkɔretiv glaz, sayn ɛn ɔda aplikeshɔn usay strɔng riflekshɔn frɔm winda ɔ atifishal layt kin nɔ fayn.

Layt Transmishɔn & Prayvesi Balans

Di ɔrijinal HSQY prodak infɔmeshɔn se layt transmishɔn kin pas 85%. Dis fɔ trit am lɛk prodak-rɛnj rɛfrɛns pas fɔ bi yunivasal valyu fɔ ɛvri kɔlɔ ɛn tik.

Klia frɔst matirial, smoky grey, blu, grɛn ɛn brawn sheet matirial s nɔ go rili gi di sem optik pefɔmɛns. If yu tik mɔ ɔ yu pik wan tint we dak, dat kin chenj bak di layt we yu de transmit.

Di wan dɛn we de bay wit akitɔkchral de layt ɔ ilɛmineshɔn rikwaymɛnt fɔ aks fɔ layt-transmishɔn data fɔ di ɛksaktɔl kɔlɔ, tik ɛn sɔfays finish we de insay di ɔda.

Frosted Polycarbonate fɔ Ɔfis Patishɔn dɛn

Yu kin yuz frɔst PC na ɔfis divayda, mitin-rum patishɔn, prayvet panɛl ɛn dɛkɔretiv intɛriɔ skrin usay de layt nid fɔ pas bitwin ples dɛn we nɔ de gi pɔsin we nɔ gɛt ɛnitin fɔ du wit am.

I sɔlid polycarbonate kɔnstrɔkshɔn de mek i rili impɔtant bak usay dɛn lɛk wan taf plastic panɛl pas kɔvɛnshɔnal dɛkɔretiv glazing matirial dɛn.

Frosted Polycarbonate fɔ Bathroom & Prayvesi Skrin dɛn

Bathrum panɛl ɛn prayvet skrin na list aplikeshɔn dɛn na di HSQY prodak infɔmeshɔn we de naw.

Fɔ wet-eria prɔjek, di ɔl instɔleshɔn fɔ tink bɔt ed siling, fiks we, klin kemikal ɛn ɛkspɛnshɔn alawɛns apat frɔm di sheet matirial sɛf.

Frosted Polycarbonate fɔ Intɛriɔ Dɛkɔreshɔn

Di frɔst sɔfays kin yuz as dɛkɔretiv akitekchral ɛlimɛnt insay patishɔn, wɔl panɛl, siling ficha, skrin ɛn ɔda intɛriɔ aplikeshɔn dɛn.

Klia ɛn tint kɔlɔ opshɔn dɛn de alaw dizayna ɛn fabricatɔ fɔ jɔyn prayvet pat wit difrɛn vijual ifɛkt dɛn. Dɛn kin rɛkɔmɛnd fɔ tek fizik sɛmpul usay di ɛksaktɔ kɔlɔ ɔ translusɛns impɔtant.

Frosted Polycarbonate fɔ Siling & Skrin dɛn

Siling ɛn skrin dɛn de insay di HSQY aplikeshɔn dɛn we de naw. Wan panɛl we gɛt frɔst kin gi layt we dɛn kin transmit togɛda wit wan say we yu kin si we sof.

Strukchɔral sɔpɔt spɛshal, fastɛns, tɛmal ɛkspɛnshɔn ɛn aplikebul bildin rikwaymɛnt dɛn fɔ disayd akɔdin to panɛl dimɛnshɔn, tiknes ɛn instɔleshɔn kɔndishɔn.

Frosted Polycarbonate fɔ Sanshades & Ɔda Panɛl dɛn

Di ɔrijinal HSQY pej inklud san shed bitwin di aplikeshɔn dɛn ɛn i se di sheet matirial sɔfays de gɛt UV-rɛsistant wɛda tritmɛnt.

Di prɔjek dɛn we de na do fɔ stil kɔnfɔm if di gred we dɛn dɔn pik gɛt UV protɛkshɔn na wan say ɔ ɔl tu di say dɛn, us say fɔ fes na do, di rilevɛns wɛda data ɛn ɛni warranty we de.

Kɔlɔ Opshɔn fɔ Frɔst Polikabɔnɛt

1.5-12mm Tiknɛs Rɛnj

Di HSQY spɛsifikɛshɔn we de naw de list tiknes frɔm 1.5mm to 12mm, wit kɔstɔmayz tiknes dɛn we dɛn rɛfrɛns bak.

Tin sheet matirial s kin pik usay di panɛl wet we smɔl ɛn we izi fɔ mek na prɔyoritɛt, we tik sheet matirial s kin fayn usay dɛn nid fɔ gɛt mɔ panɛl rigiditi.

Faynal tiknes selekshɔn fɔ tink bɔt panɛl dimɛnshɔn, sɔpɔt spɛshal, mawntin we, ɛkspɛkt lod ɛn di lɛvɛl we dɛn nid fɔ stiffnɛs.

Widths frɔm 1220mm to 2100mm

Di wit we dɛn dɔn pablish de frɔm 1220mm to 2100mm, we de alaw di wan dɛn we de bay fɔ pik panɛl dɛn we wayd fɔ patishɔn, dɛkɔretiv instɔleshɔn ɛn ɔda fabrik aplikeshɔn dɛn.

Di sɔs we de naw nɔ de gi wan kɔmplit standad lɔng tebul. Kɔnfɔm di wit, lɔng, tik ɛn kɔt tolɛreshɔn we yu nid we yu de aks fɔ kot.

UV & Wɛda Rifrɛns we dɛn dɔn pablish

Di HSQY prodak infכmeshכn we de naw se di sheet matirial sεf de gεt UV-rεsistant wεda tritmεnt we dεn bin intend fכ ridyus yכlכ we dεn kכz bay UV εkspכzכn.

Bikɔs di pej nɔ tɔk bɔt UV-layer tik, wan-sayd ɔ tu-sayd protɛkshɔn, tɛst we ɔ di warranty tɛm, di wan dɛn we de bay na do fɔ aks fɔ di aplikebul gred dɔkyumentri bifo dɛn spɛsifa di matirial fɔ lɔng tɛm ɛkstirian ɛksplɔshɔn.

Pɔblish Impɛkt Rɛsistɛns Rifrɛns

Di HSQY sɔs we de naw se di impak trɛnk na lɛk 10 tɛm di wan we ɔdinari glas gɛt, 3-5 tɛm di wan we ɔdinari kɔrɛg sheet matirial ɛn 2 tɛm pas di wan we di ɔdinari glas gɛt.

Dɛn kin kip dɛn kɔmpiashɔn valyu ya frɔm di prɔdak infɔmeshɔn we de naw, bɔt di pej nɔ de sho di tik we di matirial tik, di tɛst standad ɔ di impak-tɛst kɔndishɔn dɛn. Baya dɛn we gɛt impak rikwaymɛnt fɔ aks fɔ tɛst data fɔ di ɛksaktɔl gred ɛn tiknes.

Pɔblished Flame-Retardant Rifrɛns

Di ɔrijinal prodak infɔmeshɔn de rifer to 'Klas I' flame-retardant pefɔmɛns ɛn i se nɔ faya drɔp ɔ pɔyzin gas nɔ de.

Nɔ patikyula tɛst standad, sampul tik ɔ sɛtifikeshɔn nɔmba nɔ de fɔ dis stetmɛnt. Projɛkt dɛn we nid UL 94, EN 13501, ASTM, GB ɔ ɔda difayn faya klasifikeshɔn fɔ tɔk di ɛksaktɔ standad ɛn di raytin we dɛn nid fɔ kɔnfɔm.

Di Tɛmpratura Rifrɛns we dɛn dɔn Publish

di HSQY prodakt diskripshכn we de naw se di prodakt nכ de difכm insay wan rεnj we de arawnd -40°C to +120°C.

Kɔntinyu savis tɛmpracha, shɔt tɛm tɛmpracha ɛksplɔshɔn ɛn ɔt-diflɛkshɔn tɛmpracha na difrɛn injinɛri paramita dɛn. Baya dɛn wit tɛmpracha-kritikal aplikeshɔn fɔ aks fɔ gred-spɛsifi k tɛknikal data pas fɔ abop pan di rɛnj nɔmɔ we dɛn dɔn pablish.

Laytwɛt & Fabrikeshɔn

Di ɔrijinal prodak infɔmeshɔn de diskraib di sheet matirial as layt ɛn fayn fɔ kɛr, drɔ, kɔnstrɔkshɔn ɛn prɔsesin.

Fɔ kɔt, drɔ ɔ fɔm, yuz tul ɛn fabrikeshɔn prosidyuz dɛn we fayn fɔ polikabɔnɛt. Fabrikatɔ dɛn fɔ akɔntayn fɔ tɛmal ɛkspɛnshɔn ɛn avɔyd pasmak klem strɛs rawnd drɔl ol ɛn fiks edj dɛn.

Surface Scratch & Abrasion Kɔnsidɛreshɔn dɛn

Di ɔrijinal HSQY diskripshɔn de rɛfrɛns skrach rɛsistɛns fɔ ɔfis, os ɛn print-prɔdakt aplikeshɔn dɛn.

Di sɔs we de naw nɔ de pablish wan pensil-hadnɛs, Taber abrashɔn ɔ had-kɔtin spɛsifikɛshɔn. So, frosted finish nɔ fɔ trit ɔtomɛtik wan lɛk abrasion-resistant had-coated polycarbonate gred.

Aplikeshɔn dɛn we dɛn kin was ɔltɛm, pɔblik kɔntakt ɔ abraziv klin fɔ spɛsifa di skrach ɔ abrashɔn pefɔmɛns we dɛn nid sɛpret wan.

Frosted vs. Klia Polycarbonate shit

Frosted Polycarbonate vs. LED Difyuza Shit

Frosted polycarbonate ɛn LED diffuser sheet matirial kin ɔl tu skata layt, bɔt dɛn kin pik dɛn fɔ difrɛn praymari wok dɛn.

Aw fɔ Pik Frɔst Polycarbonate shit

Us Infɔmeshɔn Yu Fɔ Gi Fɔ Kot?

• Tik we dɛn nid

• Wid ɛn lɔng we dɛn nid

• Klia frosted ɔ rikwayd kɔlɔ

• Prayvesi lɛvɛl ɔ sampul rɛfrɛns we dɛn nid

• Aplikeshɔn insay os ɔ na do

• Patishɔn, batrum, skrin, siling, sayn ɔ ɔda aplikeshɔn

• Rikwayd layt-transmishɔn valyu if i apɔynt

• UV/weda pefɔmɛns we dɛn nid

• Rikwayd faya klasification if i apɔynt

• Di tin dɛn we dɛn nid fɔ kɔt, drɔ, print ɔ thermoforming

• Ɔda kwantiti ɛn ɛkspɛkt ɛni ia dimand

• Di kɔntri we dɛn de go ɛn di pɔt

Pak ɛn Delivri fɔ Frɔst Polycarbonate shit

• Sampul Pak: Shit dɛn we de insay PE bag wit kraft pepa, we dɛn pak insay katon.

• Sheet Packaging: 30kg fɔ wan bag ɔ as fɔ wan klaynt rikwaymɛnt.

• Palet Palet: 500-2000kg fɔ wan plai wud palet.

• Kontena Lod: 20 tan, optimiz fɔ 20ft/40ft kɔntena.

• Dilivri Tɛm dɛn: FOB, CIF, EXW.

• Lid Taym: 7-15 dez afta dipɔsit, dipen pan ɔda volyum.

Sɛtifiket Dokumɛnt dɛn

HSQY de sho setifikeshɔn dɔkyumentri wit in polycarbonate prodak dɛm. Di wan dɛn we de bay we nid patikyula sɛtifiket, tɛst ripɔt ɔ pefɔmɛns gred fɔ kɔnfɔm se di dɔkyumɛnt de aplay to di ɛksaktɔl frɔst polikabɔnɛt spɛsifikɛshɔn we de insay di ɔda.

HSQY Globɛl Ɛgzibishin dɛn

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Frɔst Polycarbonate shit

Wetin na frɔst polikabɔnɛt sheet matirial ?

Na wan sɔlid polikabɔnɛt panɛl wit mat ɔ frɔst sɔfays we de ridyus dairekt vishɔn klia we i de alaw layt fɔ pas tru di matirial.

Frosted polycarbonate fit fɔ prayvet patishɔn?

Yɛs. Intɛriɔ patishɔn ɛn prayvet skrin dɛn de pan di men aplikeshɔn dɛn we dɛn rayt fɔ dis prɔdak. Di prayvet lɛvɛl we dɛn nid fɔ bi, dɛn fɔ evalyu am ɔnda di layt kɔndishɔn dɛn we dɛn want.

Layt kin stil pas tru frɔst polikabɔnɛt?

Yɛs. Frosting de obskur dairekt vishכn pas fכ mek di sheet matirial komplitli opaque. Di HSQY sɔs we de naw de rɛfrɛns layt transmishɔn ɔp 85%, bɔt di ɛksaktɔ valyu fɔ kɔnfyus fɔ di kɔlɔ ɛn tik we dɛn dɔn pik.

Us tik tik dɛn de?

Di HSQY spesifikeshɔn we de naw de list 1.5-12mm tiknes, wit kɔstɔmayz opshɔn dɛn we dɛn rɛfrɛns bak.

Us wayd dɛn de?

Di prodak rɛnj we de naw de list di wit frɔm 1220mm to 2100mm.

Us kɔlɔ dɛn de?

Di spesifikeshɔn we de naw de sho klia, smoky, grey, blu, grɛn ɛn brawn, wit kɔstɔmayt kɔlɔ dɛn we de bak.

Yu tink se klia frɔst polikabɔnɛt transparent?

I de stil de transmit layt bɔt di frɔst sɔfays de ridyus dairekt vishɔn klia. So dɛn fɔ tek am se i translucent ɔ prayvet-oriɛnted pas fɔ ikwal to smol klia polycarbonate glazing.

Yu tink se dɛn kin yuz frɔst polikabɔnɛt na batrum?

Bathroom aplikeshɔn dɛn de insay di HSQY prodak infɔmeshɔn we de naw. Di las instɔleshɔn fɔ tink bak bɔt fɔ klin kemikal, fɔ sidɔm na di ed, fɔ fiks am ɛn fɔ muv wit tɛmal.

Yu tink se dɛn kin yuz frɔst polikabɔnɛt fɔ mek ɔfis patishɔn dɛn?

Yɛs. I fayn fɔ ɔfis divayda, prayvet panɛl ɛn mitin-rum patishɔn usay layt transmishɔn nid fɔ de togɛda wit ridyus visibiliti.

Yu tink se di mat finish de ridyus glare?

Mat surface de ridyus shap riflekshɔn we yu kɔmpia am wit wan smol glos surface ɛn i kin gi yu saf vishɔnal apinans.

Frosted polycarbonate na di sem wit LED difyuza sheet matirial ?

Nɔ, dɛn kin pik frɔst polycarbonate fɔs fɔ prayvet, ridyus glare ɛn dɛkɔretiv translucency. Wan dediket LED difyuza sheet matirial na in dɛn pik yuz optik paramita dɛn lɛk transmishɔn, haz ɛn LED hotspɔt ayd.

Na di sheet matirial UV resistant?

Di ɔrijinal HSQY infɔmeshɔn se di sɔfa de gɛt UV-rɛsistant wɛda tritmɛnt. Di prɔjek dɛn we de na do fɔ kɔnfɔm di ɛksaktɔl gred we dɛn protɛkt wit UV, sayd we dɛn protɛkt ɛn di dɔkyumɛnt dɛn we dɛn kin yuz fɔ di wɛda.

Yu tink se dɛn kin yuz frɔst polikabɔnɛt na do?

Di ɔrijinal aplikeshɔn list gɛt san shed ɛn rɛfrɛns UV wɛda tritmɛnt. Kɔnfɛm di ɛksaktɔl ɛkstirian gred ɛn UV kɔnfigyushɔn bifo yu yuz am na do fɔ lɔng tɛm.

Yu tink se frɔst polikabɔnɛt nɔ kin skrach?

Di ɔrijinal HSQY diskripshɔn de rɛfrɛns skrach rɛsistɛns, bɔt dɛn nɔ pablish ɛni abrashɔn ɔ had-kot tɛst valyu. Aplikeshɔn dɛn we nid difayn abrashɔn rɛsistɛns fɔ aks fɔ wan tɛst had-kɔt gred if i de.

Wetin na di impak resistans?

Di kɔrɛnt HSQY sɔs de pablish kɔmparativ impak-strɛng klem versus ɔdinari glas, kɔrɛkt sheet matirial ɛn tɛmpɛd glas, bɔt i nɔ de gi di asosiet tɛst we ɔ tik. Rikwest gred-spɛsifi k tɛst data usay impak pefɔmɛns impɔtant.

Wetin na di faya raytin?

Di pej we de naw de rifer to 'Klas I' flame-retardant pefɔmɛns bɔt i nɔ de tɔk bɔt di tɛst standad ɔ tiknes. Gi di faya standad ɛn raytin we dɛn nid fɔ kɔnfɔm bifo yu spɛsifa di sheet matirial fɔ aplikeshɔn dɛn we dɛn dɔn rigul.

Us tɛmpracha rɛnj dɛn rayt?

Di kɔrɛnt prodak infɔmeshɔn de rɛfrɛns lɛk -40°C to +120°C. Tempracha-kritikal projɛkt dɛn fɔ aks fɔ gred-spɛsifi k savis-tɛmpracha ɛn ɔt-pɔfɔmɛnshɔn data.

Yu tink se dɛn kin kɔt ɔ drɔ di sheet matirial ?

Di ɔrijinal prodak infɔmeshɔn de diskraib di matirial as fayn fɔ kɔt, drɔ ɛn fɔ mek. Yuz tul ɛn fabrikeshɔn prɔsis we fit fɔ polikabɔnɛt.

Aw a fɔ pik di kɔrɛkt kɔlɔ ɛn tik?

Pik akɔdin to prayvesi we yu nid, layt transmishɔn, apinans, panɛl dimɛnshɔn, strɔkchɔral sɔpɔt ɛn yuz insay ɔ na do. Dɛn kin rɛkɔmɛnd fɔ tek fizik sɛmpul dɛn fɔ mek dɛn ebul fɔ evalyu di tin dɛn we dɛn de si.

Wetin na di lida tɛm we dɛn rayt?

Di HSQY infɔmeshɔn we de naw de list 7-15 dez afta dipɔsit dipen pan di ɔda volyum. Faynal lida tɛm fɔ kɔnfyus agens di kɔlɔ, tik, saiz ɛn kwantiti we dɛn nid.

Us infɔmeshɔn a fɔ gi fɔ kot?

Gi tik, waid, lɔng, kɔlɔ, aplikeshɔn, prayvesi we dɛn nid ɛn layt-transmishɔn lɛvɛl, yuz insay ɔ na do, UV rikwaymɛnt, faya rikwaymɛnt, fabrication nid, kwantiti ɛn dɛstineshɔn.