3mm UV Resistant Klia & Kɔlɔ Polycarbonate shit
HSQY 3mm UV resistant solid polycarbonate sheet matirial na fɔ glazing, kanopi, protɛktiv panɛl, patishɔn, ikwipmɛnt kɔva ɛn ɔda indo ɔ ɔda aplikeshɔn dɛn we nid transparency, impak resistant ɛn wɛda rɛsistɛns.
Klia, transparent kɔlɔ ɛn opaque kɔlɔ opshɔn dɛn de. Standart sheet matirial saiz dɛn inklud 1220 × 2400mm ɛn 1200 × 2150mm, wit kɔstɔm saiz dɛn we de fɔ di prɔjek ɛn industrial rikwaymɛnt dɛn.
Baya dɛn kin spɛsifa di tiknes we dɛn nid, dimɛnshɔn, kɔlɔ, UV protɛkshɔn, fabrikeshɔn we, aplikeshɔn ɛn ɔda kwantiti fɔ di prɔjek-bɛs saplai.
Rikwest 3mm Polycarbonate shit Prayz Rikwest fɔ wan Sampul
UV Resistant Polycarbonate shit Spɛsifikeshɔn dɛn
| Prɔpati |
Spɛsifikeshɔn |
| Ɛgzampul |
PC sheet matirial |
| Mak |
HSQY we de wok |
| Kɔd |
PC-06 |
| Tiknɛs we dɛn sho |
3mm na di 3mm |
| Tiknɛs Rɛnj |
0,8-15mm na wan |
| Sayz |
1220 * 2400/1200 * 2150mm / Kastom Saiz |
| Kɔlɔ |
Klia/Klia wit kala/Opak kala |
Di 3mm spesifikeshɔn fayn fɔ bayer dɛn we nid wan rili laytwɛt sɔlid PC panɛl. Atikul tiknes insay di 0.8-15mm rεnj de fכ difrεn prכjek rikwaymεnt dεm.
Send Yu Spɛsifikeshɔn we Yu Rikwayd
Wetin Mek Yu Pik 3mm Sɔlid Polikabɔnɛt Shit ?
wan 3mm sכlid polikabכnet sheet matirial de gi wan kכntinyu panεl strכkchכ we nכ gεt di intanεt chεnal dεm we dεn fכnshכn insay mכltiwal polikabכnayt. I de kɔba rili lɔw sheet matirial wet wit yusful rigiditi fɔ fayn glaz, kɔva, patishɔn ɛn panɛl dɛn we dɛn mek.
Faynal tiknes sɛlɛkshɔn fɔ tink bɔt panɛl dimɛnshɔn, sɔpɔtin strɔkchɔ, impak rikwaymɛnt, briz lod, bɛnd rikwaymɛnt ɛn instɔleshɔn we.
UV Resistant Polycarbonate fɔ Aplikeshɔn dɛn na do
UV resistant polycarbonate na fɔ aplikeshɔn usay sheet matirial s kin de pan san layt ɛn ɔda wɛda kɔndishɔn.
wan ultraviolet coextruded film na di sheet matirial surface de εp fכ ridyus di rεsin fכ taya εn yכlכ we kכz fכ ultraviolet εkspכzכn.
Fɔ ruf, glaz, kanopi, grɛnhɔus panɛl ɛn ɔda ɔda prɔjek dɛn we de na do, sho di UV protɛkshɔn kɔnfigyushɔn we yu nid we yu de aks fɔ kot.
Klir ɛn Kɔlɔ 3mm Polycarbonate shit
Di opshɔn dɛn we de inklud klia, klia wit kɔlɔ ɛn opaque kɔlɔ fɔ difrɛn vijual ɛn funkshɔn rikwaymɛnt dɛn.
Klia polycarbonate fayn usay di visibiliti ɛn de layt transmishɔn impɔtant. Transparent kala sheet matirial s de gi wan tinted apinans, we opaque kala kin yuz usay vijual skrinin nid.
Di wan dɛn we de bay we nid fɔ gɛt difayn kɔlɔ, haz, glos ɔ layt transmishɔn fɔ gi di prɔjek we dɛn nid bifo dɛn prodyuz bɔku bɔku wan.
Polycarbonate shit Pɔfɔmɛnshɔn
High Light Transmission: I go rich 88% dat na di sem tik we di jenɛral glas gɛt.
Impact Resistance: Eksɛlɛnt impak resistans, we dɛn rayt am 80 tɛm pas di wan we glas gɛt.
Weta ɛn UV Resistance: UV protɛkshɔn de ɛp fɔ ridyus di rɛsin taya ɛn yɔlɔ we kin kam bikɔs ɔf ɔltra vayolɛt.
Temperatur Resistans: 40 ° C ~ +120 ° C.
Layt Weyt: Dɛn rayt am na 1/12 nɔmɔ pan di wet fɔ glas we gɛt di sem tik.
Fɔmabiliti: Polycarbonate kin kol bɛnt ɛn thermal shep fɔ fayn aplikeshɔn.
Flame Resistance: Ay faya pefɔmɛns raytin na Klas B1.
Saund ɛn Ɔt Insuleshɔn: Dɛn kin tink bɔt polikabɔnɛt fɔ aplikeshɔn dɛn we nid fɔ mek sawnd ɛn tɛmal insuleshɔn wok fayn.
Aplikeshɔn dɛn fɔ 3mm UV Resistant Polycarbonate shit
| Aplikeshɔn |
Baya Kɔnsidɛreshɔn |
| Glazing we de na do |
UV protɛkshɔn, transparency, dimɛnshɔn ɛn mawntin sistem |
| Kanopi dɛn we dɛn kin yuz |
Panel dimɛnshɔn, UV ɛksplɔshɔn, bɛnd ɛn strɔkchɔral sɔpɔt |
| Panɛl dɛn we de protɛkt pɔsin |
Impekt rikwaymɛnt, dimɛnshɔn ɛn instɔleshɔn we dɛn de yuz |
| Ikwipmɛnt Kɔva dɛn |
Di tin dɛn we dɛn nid fɔ kɔt, bɛn, drɔ ɛn di envayrɔmɛnt we dɛn nid |
| Di pat dɛn we dɛn kin sheb |
Transparency, kala, dimɛnshɔn ɛn freym sɔpɔt |
| Grinhaus Panɛl dɛn |
UV protɛkshɔn, layt transmishɔn, dimɛnshɔn ɛn sɔpɔt spɛshal |
| Komponent dɛn we dɛn dɔn mek |
Finish jɔyometri, tolɛreshɔn ɛn fɔm rikwaymɛnt |
Ɔda Polikabɔnɛt Matirial Aplikeshɔn dɛn
Ilɛktronik Aplayans: Dɛn kin yuz polikabɔnɛt fɔ mek insulin plɔg-in, kɔyl freym, tiub sɔkɛtɛ ɛn bateri shel fɔ fayn aplikeshɔn dɛn.
Mɛkanikal Ikwipmɛnt: Dɛn kin yuz polikabɔnɛt bak fɔ sɔm gia, rɛk, bolt, lev, krankshaft, haus, kɔva ɛn freym.
Mɛdikal Ikwipmɛnt: Fɔ mek dɛn yuz am fɔ mɛn pipul dɛn, dɛn nid fɔ gɛt di rayt polikabɔnɛt gred ɛn di dɔkyumɛnt dɛn we dɛn fɔ yuz fɔ di wok.
Kɔnstrɔkshɔn: Dɛn kin yuz polikabɔnɛt bak fɔ du fayn grin haus ɛn bildin panɛl aplikeshɔn dɛn.
Polycarbonate shit Imej dɛn
![3mm UV Resistant Polycarbonate shit]()
UV Resistant Sɔlid Polikabɔnɛt Shit
![UV Resistant Polycarbonate shit Aplikeshɔn dɛn]()
Polycarbonate shit Aplikeshɔn dɛn
![Klia ɛn Kɔlɔ Polycarbonate shit Aplikeshɔn dɛn]()
Klia ɛn Kɔlɔ Polikabɔnɛt Aplikeshɔn dɛn
Fabrikɛshɔn ɛn Prɔsesin Opshɔn dɛn
| Proses |
Infɔmeshɔn fɔ Gi |
| Prɛsishɔn Kɔt |
Finished wit, lɔng ɛn dimɛnshɔnal tolɛreshɔn |
| Fɔ mek tin dɛn we dɛn rayt |
Patna, dip ɛn sɔfayz rikwaymɛnt |
| Fɔ bɛn |
Rikwayd bend rayus ɛn finish jɔyometri |
| Panch / Drilin we yu de du |
Hol dimɛnshɔn, spays ɛn mawntin arenjmɛnt |
| Fɔ polish |
Di edj finish we dɛn nid |
| Bonding we gɛt fɔ du wit dɛnsɛf |
Assembly strɔkchɔ ɛn bonding rikwaymɛnt dɛn |
| Tɛmofɔmin we dɛn de mek |
Start tik, mold jɔyometri ɛn fɔm dip |
| UV Flatbed Printin we dɛn kin yuz fɔ print |
Printing surface ɛn di aplikeshɔn we dɔn dɔn |
| Fɔ Print na Skrin |
Ink kompitibiliti ɛn di print rizɔlt we dɛn nid |
PC Kad Matirial ɛn Polikabɔnɛt Ɔvlay Film
| Prɔpati |
Spɛsifikeshɔn |
| Di Prodak Nem |
PC Card Material , polikabɔnɛt ɔvlay film |
| Tin dɛn |
100% nyu matirial polycarbonate |
| Kɔlɔ |
posin wayt, milk wayt,Transparent |
| Sho |
smol, frɔst Glossy, Mat |
| Tiknɛs rɛnj |
0.05/0.06/0.075/0.10/0.125/0.175/0.25mm ɔ we dɛn kɔstɔmayz |
| We |
Kalɛnda we dɛn de du |
| Aplay fɔm |
plastic kad mek, Laser engraving kad,Laser printin kad |
| Di Tin dɛn we Yu Go Du fɔ Print |
CMYK Ɔfset Printin, Silk-skrin printin, UC sikyɔriti printin, Laser printin |
Wetin Baya dɛn Fɔ Kɔnfɛm Bifo Dɛn Ɔda
| Rikwaymɛnt |
Infɔmeshɔn fɔ Gi |
| Tik we i tik |
3mm ɔ tik we dɛn nid |
| Sayz fɔ di Shit |
1220 × 2400mm, 1200 × 2150mm ɔ kɔstɔm dimɛnshɔn dɛn |
| Kɔlɔ |
Klia, transparent kɔlɔ ɔ opaque kɔlɔ |
| Protɛkshɔn fɔ UV |
Rikwayd UV protɛkshɔn kɔnfigyushɔn ɛn ɛksplɔshɔn ɛnvayrɔmɛnt |
| Aplay fɔm |
Glazing, kanopi, protɛktiv panɛl, patishɔn, grin haus ɔ fabricated kɔmpɔnɛnt |
| Optik Rikwaymɛnt |
Transparency, tint, haze ɔ apruv sampul |
| Impekt Rikwaymɛnt |
Aplikeshɔn tɛst rikwaymɛnt ɔ prɔjek pefɔmɛns |
| Fabrikeshɔn fɔ mek tin dɛn |
Fɔ kɔt, drɔ, bɛnd, polish, bon, tɛmɔfɔm ɔ print |
| Ɔmɔs |
Sampul kwantiti, trayal ɔda ɛn bɔlk kwantiti |
| Usay yu de go |
Kɔntri, pɔt ɛn di delivri schedule we dɛn nid |
Get wan 3mm UV Polycarbonate shit Kot
Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm
Dis prodakt de insay 3mm tiknes?
Yɛs. Dis prodakt de ofa as 3mm UV resistant solid polycarbonate sheet matirial . Atikul tiknes insay di 0.8-15mm rεnj de bak.
Us sheet matirial saiz dɛn de?
Di saiz dɛn we de na 1220 × 2400mm, 1200 × 2150mm ɛn kɔstɔma-sayz opshɔn dɛn.
Us kɔlɔ dɛn de?
Di opshɔn dɛn inklud klia, klia wit kɔlɔ ɛn opaque kɔlɔ.
Dis polycarbonate sheet matirial fayn fɔ yuz na do?
UV resistant polycarbonate kin yuz fɔ fayn ɔda aplikeshɔn dɛn. Faynal suitabiliti dipen pan UV protɛkshɔn, ɛksplɔshɔn kɔndishɔn, strɔkchɔral dizayn ɛn instɔleshɔn rikwaymɛnt.
Wetin na di layt transmishɔn?
Up to 88% layt transmishɔn de list fɔ fayn polycarbonate kɔnfigyushɔn. Aktual pefɔmans kin difrɛn wit tik, kɔlɔ, sɔfa ɛn matirial gred.
Yu tink se 3mm polycarbonate sheet matirial kin bɛn?
Polikabɔnɛt kin kol bɛnt fɔ fayn aplikeshɔn dɛn. Gi di panɛl dimɛnshɔn dɛn we yu nid ɛn di bɛnd rayus we yu de aks fɔ kot.
Yu tink se di sheet matirial kin thermoformed?
Yɛs. Tɛmofɔmin de fɔ fayn PC sheet matirial prɔjɛkt dɛn. Provayd di mold jɔyometri, fɔm dip ɛn finish-pat rikwaymɛnt.
HSQY kin saplae kɔstɔm-kat polikabɔnɛt sheet matirial s?
Yɛs. Kastom saiz ɛn prɛsishɔn kɔt de. Gi di rikwayd finish dimɛnshɔn ɛn tolɛreshɔn wit yu inkwyuizhɔ.
Us faya raytin de?
Klas B1 de na di list fɔ di matirial. If faya pefɔmɛns nid fɔ de, kɔnfɔm di tɛst standad we de ɛn ripɔt fɔ di gred ɛn tik we yu dɔn pik.
Aw fɔ klin polikabɔnɛt sheet matirial ?
Yuz wam wata we gɛt sop ɛn klos we saf. Nɔ yuz abrasive klin matirial dɛn we kin skrach ɔ pwɛl di sheet matirial sɔfays.
Yu tink se polikabɔnɛt nɔ kin brok atɔl?
Nɔ. Polikabɔnɛt de gi ay impak rɛsistɛns, bɔt siriɔs impak, lod pasmak, mashin damej ɔ inkɔrɛkt instɔleshɔn kin stil damej di sheet matirial .
Us infɔmeshɔn a fɔ gi fɔ kot?
Gi di tiknes we yu nid, sheet matirial dimɛnshɔn, kɔlɔ, UV kɔnfigyushɔn, aplikeshɔn, optik rikwaymɛnt, fabrikeshɔn rikwaymɛnt, kwantiti ɛn ples fɔ go.
Rikwest 3mm Polycarbonate shit Prayz
Fɔ pak tin dɛn
Bɔt HSQY Plastik Grup
Changzhou Huisu Qinye Plastic Group Co., Ltd. spɛshal pan PC sheet matirial prodak ɛn kɔstɔmayz polikabɔnɛt prɔsesin fɔ intanashɔnal kɔstɔma dɛn.
Prosesin kapabiliti inklud engraving, bend, prɛsishɔn kɔt, panch, polish, bond, thermoforming, blista prɔsesin, UV flatbed printin ɛn skrin printin.
HSQY gɛt pas 16 ia ɛkspɔt ɛkspiriɛns fɔ saplae PC sheet matirial s to kɔstɔma dɛn ɔlsay na di wɔl.
Kontakt HSQY fɔ Sampul ɛn Prayz
