HSQY Tekstur Polikarbonɛt Sheet

Tekstured Polycarbonate Sheet fɔ Prayvet ɛn Layt Difyushɔn

HSQY tekschur polycarbonate sheet, we dɛn kin kɔl bak embossed polycarbonate sheet ɔ patterned polycarbonate sheet, na wan sɔlid PC sheet wit wan textured surface we dɛn mek fɔ difyuz layt, ridyus glare ɛn limit dairekt visibiliti we i de mentɛn di trɛnk ɛn durabiliti fɔ polycarbonate.

Di tɛkstɔr sɔfays de gi balans fɔ natura layt transmishɔn ɛn vijual prayvet pat, we de mek di shit fayn fɔ batrum glaz, patishɔn, dɛkɔretiv panɛl, layt, siling, skrin, san shed ɛn akitekchral aplikeshɔn usay klia si-thru visibiliti nɔ nid.

HSQY de saplae tɛkstɔr PC sheet dɛn insay klia, grɛn, blu, smok, brawn, opal ɛn kɔstɔmayz kɔlɔ dɛn. Tiknes we de frɔm 1.5mm to 12mm, wit standad wit we inklud 1220mm, 1560mm, 1820mm ɛn 2150mm. Dɛn kin tɔk bɔt di spɛsifikɛshɔn dɛn we dɛn dɔn kɔstɔmayt akɔdin to wetin di prɔjek nid.

       Rikwest Tekstur Polikabonayt Shit Kot    

Tekstur Polikarbonɛt Sheet Vidio

Tekstur vs. Glossy Polikarbonɛt Sheet

Nɔ lɛk wan kɔvɛnshɔnal glos klia polikabɔnɛt shit, tɛkstɔr polikabɔnɛt gɛt patɛn sɔfays we de skata layt we de kam ɛn ridyus di dairekt si-tru visibiliti. Dis de mek i yusful mɔ fɔ aplikeshɔn dɛn we nid fɔ gɛt prayvet pat, layt we saf ɔ we nɔ gɛt bɛtɛ glare.

Wetin Na Tekschɔ Polikabɔnɛt Shit?

Tekschɔ polikabɔnɛt shit na sɔlid polikabɔnɛt panɛl we dɛn mek wit patɛn ɔ ɛmbos sɔfays. Di surface texture de chenj di we aw layt de pas tru di sheet, ɛp fɔ difyuz dairekt layt ɛn obskur ditayla views tru di panɛl.

Di matirial de kip di ki kwaliti dɛm fɔ sɔlid polikabɔnɛt, inklud ay impak rɛsistɛns, lɔw wet, gud tɛmpracha pefɔmɛns ɛn izi fɔ mek. Di tɛkstɔr sɔfays de mek bak wan difrɛn dɛkɔretiv apinans fɔ akitekchral ɛn intɛriɔ dizayn aplikeshɔn dɛn.

Tekschur polycarbonate sheet na in dɛn kin kɔmɔn fɔ fɛn bak as ɛmbos polycarbonate sheet, patterned PC sheet, textured PC sheet, prayvet polycarbonate panel ɛn decorative polycarbonate sheet.

Tekstur Polikarbonɛt Shit Spɛsifikeshɔn dɛn

Ki Ficha dɛn fɔ Tekstɔr Polikabɔnɛt Shit

Layt Difyushɔn: Di tɛkstɔr sɔfays de ɛp fɔ skata dairekt layt, we de prodyuz sɔft ɛn ivin distribyushɔn layt we yu kɔmpia am wit wan kɔmplit smol transparent sɔfays.

Enhanced Privacy: Di patɛn surface de limited klia si-thru visibiliti we stil alaw natura ɔ atifishal layt fɔ pas tru, mek di matirial fayn fɔ prayvet glazing ɛn patishɔn.

Ridyus Glare: Tekstɔrin de ɛp fɔ brok dairekt riflɛkshɔn ɛn harsh layt, we yusful fɔ layt kɔva, skrin, patishɔn ɛn dɛkɔretiv glazing.

Ay Layt Transmishɔn: Klia gred kin gi layt transmishɔn we pas 85%, i dipen pan di tik we di shit tik, di kɔlɔ, di patɛn we de na di say ɛn di gred we di prɔdak gɛt.

High Impact Resistance: Polycarbonate de gi strɔng impak resistance ɛn i nɔ kin brok bɛtɛ pas kɔvɛnshɔnal glas, we kin mek i yusful fɔ glazing ɛn intɛriɔ aplikeshɔn usay i impɔtant fɔ mek i te.

UV ɛn Wɛda Resistans: UV-resistant tritmɛnt opshɔn dɛn de ɛp fɔ protɛkt di sheet frɔm lɔng tɛm na do ɛn ridyus di pwɛl pwɛl we ɔltra vayolɛt raytin kin mek.

Waid Tɛmpratura Pɔfɔmɛnshɔn: Dɛn mek di prɔdak fɔ yuz insay wan tɛmpracha rɛnj we de lɛk -40°C to +120°C akɔdin to di HSQY prodak spɛsifikɛshɔn we de naw.

Layt: Polikabɔnɛt nɔ tu layt, i de ɛp fɔ mek i izi fɔ transpɔt, fɔ ol, fɔ mek ɛn fɔ instɔl am.

I izi fɔ mek: Dɛn kin kɔt, drɔl ɛn prosɛs PC sheet dɛn we gɛt tɛkstɔr bay we dɛn yuz di rayt we fɔ mek polikabɔnɛt.

Dɛkɔretiv Apiyans: Di ɛmbos sɔfays de gi vishɔnal tɛkstɔr ɛn i kin ɛp fɔ mek smɔl smɔl sɔfays mak dɛn less visually prominent pas pan di transparent sheet dɛn we gɛt ay glos.

Tekstur Polikarbonɛt vs. Klia Glɔs Polikabɔnɛt

Aplikeshɔn dɛn fɔ Tekstɔr Polikabɔnɛt Shit

Tekschɔd polycarbonate sheet dɛn fayn fɔ aplikeshɔn dɛn we nid fɔ gɛt kɔmbayn layt transmishɔn, prayvet pat, dɛkɔretiv apinans ɛn impak rɛsistɛns.

Bathroom and Privacy Glazing: Di tɛkstɔr sɔfays de alaw layt fɔ kam insay we i de mek di ditayl visibiliti nɔ klia, we de mek di sheet fayn fɔ batrum panɛl, shawa-eria glazing ɛn prayvet winda.

Intɛriɔ Patishɔn: Dɛn kin yuz am fɔ ɔfis patishɔn, rum divayda, dɛkɔretiv skrin ɛn ɔda intɛriɔ panɛl usay natura layt ɛn prayvet pat ɔl tu nid.

Layt Aplikeshɔn: Di tɛkstɔr sɔfays kin difyuz layt ɛn ridyus dairekt glare, mek tɛkstɔr PC fayn fɔ sɔm layt kɔva dɛn, dɛkɔretiv laytin ɛn panɛl dɛn we gɛt layt.

Intɛriɔ Dɛkɔreshɔn: Patɛn polikabɔnɛt de mek wan dɛkɔretiv translucent ifɛkt fɔ wɔl panɛl, displei, fɔnicha kɔmpɔnɛnt ɛn akitɔkchral dizayn ficha dɛn.

Siling ɛn Skrin: I fayn fɔ dɛkɔret siling panɛl, suspɛnd siling aplikeshɔn, skrin ɛn ɔda translucent akitekchral ɛlimɛnt dɛn.

Sanshed ɛn Ɔda Aplikeshɔn: Dɛn kin tink bɔt gred dɛn we dɛn trit wit UV fɔ sɔm ɔda aplikeshɔn dɛn usay layt transmishɔn, wɛda rɛsistɛns ɛn dɛkɔretiv apinɛns nid fɔ de.

       Diskus Yu Tekstur PC Shit Aplikeshɔn    

Aw fɔ Pik di Rayt Tekstɔr Polikabɔnɛt Shit

1. Pik di Tik we yu nid

HSQY textured polycarbonate sheets de frɔm 1.5mm to 12mm akɔdin to di ditayl prodak spesifikeshɔn we de naw. Tiknes fɔ pik akɔdin to panɛl saiz, sɔpɔt strɔkchɔ, impak rikwaymɛnt ɛn fayn aplikeshɔn.

2. Ditarmin di Prayvesi Lɛvɛl we yu nid

Aplikeshɔn dɛn lɛk batrum ɛn patishɔn dɛn jɔs nid fɔ mek yu si mɔ tin dɛn pas fɔ mek yu dekɔret glaz ɔ layt. Tɛl HSQY aw bɔku si-thru visibiliti ɛn layt difyushɔn yu prɔjek nid.

3. Pik Klia ɔ Kɔlɔ Polikabɔnɛt

Klia tɛkstɔr polikabɔnɛt de gi ay natura layt transmishɔn, we grɛn, blu, smok, brawn ɛn opal opshɔn dɛn de gi difrɛn dɛkɔretiv ɛn vijual ifɛkt dɛn. Dɛn kin tɔk bɔt di kɔstɔm kɔlɔ dɛn akɔdin to di kwantiti we dɛn ɔda ɛn di tin dɛn we dɛn nid fɔ mek.

4. Kɔnfɔm di Surface Pattern

Difrɛn tɛkstɔr patɛn kin prodyuz difrɛn lɛvɛl dɛn fɔ prayvet, layt difyushɔn ɛn dɛkɔretiv apinɛns. Send wan rɛfrɛns foto, sampul ɔ rikwayd sɔfays spɛsifikɛshɔn so di aprɔpriet patɛn we de fɔ kɔnfyus bifo dɛn prodyuz.

5. Kɔnfɛm Yuz insay os ɔ na do

Fɔ lɔng tɛm instɔleshɔn na do, sho se di sheet go de na di san ɛn di wɛda so dat dɛn go ebul fɔ evalyu di rayt UV-resistant prodak opshɔn.

6. Kɔnfɛm Finished Shit Sayz

Standart wit dɛn inklud 1220mm, 1560mm, 1820mm ɛn 2150mm. Gi yu rikwayd wit, lɔng, kwantiti ɛn kɔt rikwaymɛnt so dat dɛn go ebul fɔ evaluate matirial yutilizeshɔn ɛn shiping.

Tekstur Polikarbonɛt Sheet Fabrikeshɔn

Polycarbonate na rili izi fɔ mek we yu kɔmpia am wit bɔku glazing matirial dɛn. Yu kin kɔt ɛn drɔl sheet dɛn we gɛt tɛkstɔr bay we yu yuz fayn tul dɛn ɛn kɔrɛkt we fɔ prosɛs.

We yu de mek ɔ instɔl PC sheet dɛn, alaw fɔ mek dɛn gɛt tɛmal ɛkspɛnshɔn ɛn avɔyd fɔ klem pasmak rawnd di ol dɛn we dɛn dɔn drɔ ɛn di ed dɛn we dɛn dɔn drɔ. Dɛn fɔ pik di kɔndishɔn fɔ prosɛs akɔdin to di tik we di shit tik, di dimɛnshɔn ɛn di las aplikeshɔn.

Infɔmeshɔn Nid fɔ wan Tɛkschɔ Polikabɔnɛt Shit Kɔt

Fɔ ɛp HSQY fɔ rɛkɔmɛnd di kɔrɛkt tɛkstɔr PC sheet ɛn fɔ gi kɔrɛkt kot, duya sɛn dɛn infɔmeshɔn ya we i de:

• Tik we dɛn nid

• Shit wit ɛn lɔng

• Klia, grɛn, blu, smok, brawn, opal ɔ kɔstɔm kɔlɔ

• Rikwayd tɛkstɔr ɔ rɛfrɛns sɔfa patɛn

• Prayvet ɔ layt-difyushɔn rikwaymɛnt

• Yuz insay os ɔ na do

• UV protɛkshɔn we dɛn nid

• Faynal aplikeshɔn

• Kwantiti we dɛn nid

• Sɛtifiket ɔ tɛst ripɔt dɛn we dɛn nid

• Di kɔntri ɔ pɔt usay dɛn de go

       Get Tekstur Polikarbonɛt Sheet Prays    

Packaging ɛn Delivery fɔ Tekschɔd Polikabɔnɛt Shit

• Sampul Pak: Shit dɛn we de insay PE bag wit kraft pepa ɛn pak insay katon.

• Sheet Packaging: Na lɛk 30kg fɔ wan bag ɔ akɔdin to wetin di kɔstɔma nid.

• Pallet Packaging: 500-2000kg fɔ wan plai wud palet akɔdin to di sheet dimɛnshɔn ɛn ɔda rikwaymɛnt dɛn.

• Kɔntinɛnt Lod: Dɛn kin ɔptimayz kɔntena lod fɔ 20ft ɔ 40ft kɔntena.

• Dilivri Tɛm dɛn: FOB, CIF ɛn EXW.

• Lid Taym: Aprɔksimatli 7-15 dez afta dipɔsit dipen pan ɔda kwantiti, spɛsifikɛshɔn ɛn prodakshɔn schedule.

Sɛtifiket dɛn we dɛn kin gi

HSQY kin gi kwaliti ɛn prodak dɔkyumentri we de akɔdin to di polycarbonate gred we dɛn dɔn pik ɛn di tin dɛn we di kɔstɔma nid. If yu prɔjek nid fɔ gɛt wan patikyula faya, UV, impak, kɔnstrɔkshɔn ɔ rigyuletɔri standad, duya gi di rayt standad bifo yu ɔda so dat dɛn go kɔnfyus di rilevɛns dɔkyumentri.

Globɛl Ɛgzibishin dɛn

HSQY Plastic Group de mit kɔstɔma ɛn industri patna dɛn tru intanashɔnal plastic, pak ɛn matirial ɛgzibishin dɛn na big big glob ɔl makɛt dɛn.

FAQ Bɔt Tekschɔ Polikabɔnɛt Shit

Wetin na wan tɛkstɔr polikabɔnɛt sheet?

Tekstur polycarbonate sheet na solid PC sheet wit embossed ɔ patern surface. Di tɛkstɔr de ɛp fɔ difyuz layt, ridyus glare ɛn ɔbskɔr dairekt visibiliti we i de kip di durabiliti ɛn impak rɛsistɛns fɔ polycarbonate.

Yu tink se tɛkstɔr polikabɔnɛt na di sem wit ɛmbos polikabɔnɛt?

Dɛn kin yuz di wɔd dɛn fɔ di sem kayn prɔdak dɛn. Teks, ɛmbos ɛn patɛn polikabɔnɛt jɔs de diskrayb PC shit wit wan nɔ-smol sɔfa patɛn we dɛn mek fɔ dɛkɔretiv, prayvet ɔ layt-difyushɔn aplikeshɔn.

Yu tink se tɛkstɔr polycarbonate de gi prayvet pat?

Yɛs. Di surface patɛn de obskur ditayla visibiliti tru di sheet we stil alaw layt transmishɔn. Dis de mek tɛkstɔr polikabɔnɛt fayn fɔ batrum glaz, patishɔn, skrin ɛn ɔda prayvet aplikeshɔn dɛn.

Yu tink se polycarbonate we gɛt tɛkstɔr de mek layt skata?

Yɛs. Di patɛn sɔfays de skata layt we de kam ɛn ɛp fɔ mek wan soft vijual ifɛkt we yu kɔmpia am wit kɔmplit smol transparent polycarbonate. Aktual difyushכn dipכnt pan di sכfayz patεn, kכla εn shit spεsifikεshכn.

Aw bɔku layt we gɛt tɛkstɔr polikabɔnɛt de transmit?

Akɔdin to di HSQY prodak infɔmeshɔn we de naw, di rayt gred dɛn kin gi layt transmishɔn we pas 85%. Di aktual valyu kin difrɛn akɔdin to di kɔlɔ, tik, tɛkstɔr ɛn spɛshal prɔdak gred.

Us tik tik dɛn de?

Di kɔrɛnt ditayl HSQY spɛsifikɛshɔn de list tɛkstɔr polycarbonate sheet frɔm 1.5mm to 12mm, wit kɔstɔmayz spesifikeshɔn dɛn we de dipen pan prodakshɔn rikwaymɛnt.

Us kɔlɔ dɛn de fɔ tɛkstɔr PC sheet?

Di kɔlɔ dɛn we de na klia, grɛn, blu, smok, brawn ɛn opal. Dɛn kin tɔk bak bɔt di kɔlɔ dɛn we dɛn mek fɔ di wan dɛn we dɛn want fɔ mek, akɔdin to di kwantiti ɛn di tin dɛn we dɛn nid fɔ mek.

Yu kin yuz tɛkstɔr polycarbonate sheet na do?

Yɛs. Fɔ lɔng tɛm fɔ yuz na do, dɛn fɔ pik wan fayn gred we nɔ de mek UV. Gi di instɔleshɔn ɛnvayrɔmɛnt ɛn ɛkspɛkt ɔda ɛksplɔshɔn we yu de aks fɔ kot.

Yu tink se dɛn kin kɔt ɔ drɔl polikabɔnɛt sheet we gɛt tɛkstɔr?

Yɛs. Dɛn kin kɔt ɛn drɔ polikabɔnɛt sheet dɛn bay we dɛn yuz di rayt tul dɛn ɛn di we aw dɛn kin mek dɛn. Dɛn fɔ mek di rayt alawɛns fɔ di tik we di shit tik, di ed distans ɛn fɔ mek i gɛt tɛmal ɛkspɛnshɔn.

Aw a go klin di polikabɔnɛt sheet we gɛt tɛkstɔr?

Yuz klin wata, sop we nɔ gɛt wan bɔt ɛn klos ɔ spɔnj we saf. Nɔ yuz abrasive klin tul dɛn ɛn agresiv kemikal dɛn we kin skrach ɔ pwɛl di polycarbonate surface.

A kin aks fɔ sampul bifo a ɔda?

Yɛs. Wan sampul yusful fɔ chɛk di tɛkstɔr, transparency, prayvet ifɛkt, kɔlɔ ɛn layt-difyushɔn pefɔmɛns bifo yu mek bɔku ɔda.

Us infɔmeshɔn a fɔ gi fɔ kot?

Duya gi di tik, waid, lɔng, kɔlɔ, tɛkstɔr we yu nid, aplikeshɔn, yuz insay ɔ na do, UV we yu nid, kwantiti ɛn usay yu want fɔ go. Rifrɛns foto ɔ drɔin dɛn kin ɛp bak we dɛn nid fɔ mek wan patikyula sɔfa patɛn.

Bɔt HSQY Plastik Grup

HSQY Plastic Group gɛt pas 20 ia ɛkspiriɛns fɔ saplae plastic sheet ɛn film prodak to intanashɔnal kɔstɔma dɛn. I polycarbonate prodakt rɛnj de sɔpɔt kɔnstrɔkshɔn, akitekchral, ​​laytin, dɛkɔreshɔn ɛn industrial aplikeshɔn dɛn.

HSQY de sɔpɔt B2B kɔstɔma dɛn wit spɛsifikɛshɔn sɛlɛkshɔn, kɔstɔmayz kɔlɔ ɛn dimɛnshɔn, sampul ɛvalueshɔn, ɛkspɔt pak ɛn projɛkt-bɛs saplai. Di wan dɛn we de bay kin gi drɔin, rɛfrɛns sɛmpul ɔ aplikeshɔn rikwaymɛnt fɔ tɛknikal diskishɔn bifo dɛn ɔda.

       Get Quote & Rikwest wan Sampul