HSQY Kɔla a ɛda adi pefee 0.18mm 0.8mm-PC Rigid Films

HSQY Transparent Kɔla PC Rigid Film 0.18mm-0.8mm

HSQY transparent kɔla PC rigid film yɛ fi 100% foforo polycarbonate ade. Ɛfata ma PC kaad nneɛma, polycarbonate kata sini, plastic kaad yɛ, laser engraving kaad, laser tintim kaad, ahobammɔ kaad ne afoforo pɛpɛɛpɛ plastic film applications.

Polycarbonate rigid film ma transparency a ɛkorɔn, impact resistance a ɛkyɛn so, dimensional stability a emu yɛ den, ɔhyew a ɛko tia pa ne tintim adwumayɛ a wotumi de ho to so. Wobetumi de ama wɔ kɔla a ɛyɛ mmerɛw, porcelain fitaa, nufusu fitaa ne nea wɔayɛ no sɛnea wɔpɛ a ɛwɔ soro a ɛyɛ torotoro, frosted, glossy anaa matte.

PC Rigid Film Nneɛma a Wɔyɛ no Ho Nsɛm

HSQY de polycarbonate overlay film ne PC card nneɛma a ɛwɔ thicknesses, kɔla ne surface finishes pii ma. Wobetumi ayɛ nhyehyɛe a ɛfa sɛnea adetɔfo hwehwɛ, ne kɔla, ɔfasu ne tintim a ɛne ne ho hyia no yɛ nea wɔahyɛ da ayɛ.

Mfaso Titiriw a Ɛwɔ Polycarbonate Rigid Film so

• Hann a ɛkɔ soro, ɛkɔ 88% wɔ ahwehwɛ a ɛwɔ hɔ nyinaa mu duru koro no ara mu.

• Ɛko tia nsunsuanso a ɛkyɛn so, bɛyɛ ahwehwɛ de mmɔho 80.

• Wim tebea ne UV a ɛko tia ma ɛyɛ adwuma bere tenten ne kɔkɔɔ a ɛso tew.

• Ɔhyew a ɛko tia no fi -40°C kosi +120°C.

• Ɔdan a emu yɛ hare, ahwehwɛ a ne kɛse yɛ pɛ no mu duru bɛyɛ 1/12 pɛ.

• Wobetumi ayɛ awɔw bent, thermoformed na wɔayɛ ho adwuma ama dwumadie ahodoɔ.

• Ogya a ɛko tia pa ne B1 ogya adwumayɛ rating.

• Honam fam, mfiridwuma, anyinam ahoɔden ne ɔhyew adwumayɛ a ɛkyɛn so sɛ mfiridwuma mu plastic.

PC Krataa ne PC Film Nneɛma a Wɔde Di Dwuma

Wɔde polycarbonate nneɛma di dwuma kɛse wɔ ɛlɛtrɔnik mfiri, mfiridwuma nnwinnade, nnuruyɛ mfiri, adansi ne kaad a wɔyɛ mu. PC rigid films fata titiriw ma card overlay, tintim, laser engraving ne ahobammɔ card applications.

• Ɛlektrɔnik mfiri: insulating plug-ins, coil frames, tube sockets ne battery shells.

• Mfiridwuma mu nneɛma: gears, racks, bolts, levers, crankshafts, nkataso ne adan.

• Aduruyɛ nnwinnade: nkuruwa, nsukorade, nkotoku, nsensan ho nnwinnade ne nnuruyɛ nnwinnade afã horow.

• Adansi: ntama a ɛyɛ tokuru, greenhouse glazing, ahobammɔ panels ne adansi nneɛma.

• Kaad a wɔyɛ: plastic kaad, laser engraving kaad, laser tintim kaad ne ahobammɔ kaad.

PC Rigid Film a wɔde ahyɛ mu

HSQY de ahobammɔ packing ma PC rigid films ne polycarbonate sheets de tew surface scratches, deformation ne transportation ɔsɛe so. Wobetumi ayɛ nhyehyɛe a wɔahyɛ da ayɛ packing sɛnea krataa kɛse, roll format ne export ahwehwɛde ahorow te.

Company Nnianim Asɛm

Changzhou Huisu Qinye Plastic Group Co., Ltd. yɛ adwuma titiriw wɔ PC board, PC boasetɔ board, PC diffusion board ne PC krataa a wɔyɛ ne ne tɔn mu. Nnwuma a wɔyɛ no bi ne engraving, bending, precision cutting, punching, polishing, bonding, thermoforming, blister forming wɔ mita 2.5 * 6 mu, ABS thick plate blister, UV flatbed tintim ne screen tintim.

Ɛnam sɛ HSQY de bɛboro mfeɛ 16 ayɛ adwuma wɔ nneɛma a wɔde kɔ amannɔne so nti, ɛde nneɛma a ɛkorɔn ma PC sheets , PC rigid films ne customized polycarbonate nneɛma ano aduru ma adetɔfo wiase nyinaa.

Wowɔ ntease a enti ɛsɛ sɛ wopaw polycarbonate board ne PC rigid film fi Huisu Qinye Plastic Kuw.

FAQ

Dɛn na wɔde PC rigid film di dwuma?

PC rigid film yɛ de di dwuma ma plastic kaad yɛ, polycarbonate overlay film, laser engraving kaad, laser tintim kaad, ahobammɔ kaad, ɛlɛtrɔnik insulation, tintim ne afoforo pɛpɛɛpɛ plastic film applications.

Dɛn ne ogya dodow a wɔde yɛ polycarbonate krataa?

Polycarbonate nneɛma betumi adu B1 ogya dodow, a ɛma ogyaframa a ɛko tia yiye ma nnwuma a ɛhwehwɛ mfiridwuma mu plastic nneɛma a ahobammɔ wom.

So polycarbonate ntumi mmubu?

Polycarbonate yɛ nea ɛko tia kɛse na wɔtaa ka ho asɛm sɛ ɛkame ayɛ sɛ entumi mmu bere a wɔde di dwuma daa no. Nanso, wontumi nhyɛ bɔ sɛ ade biara rentumi mmubu 100% wɔ tebea horow a emu yɛ den te sɛ ɔtopae anaa ballistic impact mu.

So metumi atwitwa polycarbonate nkratafa wɔ fie?

Aane. Wobetumi de nnwinnade te sɛ jigsaw, band saw anaa fret saw atwitwa polycarbonate nkratafa. HSQY nso de nnwuma a wɔatwa no kɛse ma de boa adetɔfo ma wɔatew adwuma a wɔyɛ de di dwuma no so.

Ɔkwan bɛn so na ɛsɛ sɛ mehohoro polycarbonate krataa no ho?

Fa samina nsu a ɛyɛ hyew ne ntama a ɛyɛ mmerɛw hohoro polycarbonate krataa no ho. Mfa nneɛma a ɛyɛ abrasive, solvents a ɛyɛ den anaa nnwinnade a ɛyɛ den a wɔde tew nneɛma ho nni dwuma efisɛ ebetumi asɛe nea ɛwɔ soro no.

Nsonsonoe bɛn na ɛda polycarbonate ne acrylic ntam?

Polycarbonate wɔ ahoɔden a ɛkorɔn kɛse a ɛko tia ogya na ɛyɛ adwuma yiye sen acrylic. Acrylic mu yɛ den sen ahwehwɛ nanso ebetumi abubu anaasɛ abubu wɔ ahoɔden mu, bere a polycarbonate fata kɛse ma nneɛma a ɛrentumi nsɛe no.

So PC nkrataa kɔla sesa bere a bere kɔ so no?

Sɛ wɔde UV ahobammɔ a ɛda adi pefee di dwuma a, PC nkrataa betumi ako atia kɔla a ɛbɛsakra na ayɛ kɔkɔɔ ma wɔde adi dwuma bere tenten wɔ abɔnten. Ɔsom nkwa gyina nneɛma grade, UV ahobammɔ, installation tebea ne nsiesie.

Nsɛm bɛn na ehia ma asɛm bi a wɔafa aka?

Yɛsrɛ sɛ fa nea wɔhwehwɛ no kɛse, kɔla, ɔfasu awie, kɛse anaa roll format, application, printing ahwehwɛde, dodow ne destination port ma. HSQY betumi akamfo PC rigid film anaa PC krataa ano aduru a ɛfata akyerɛ.