HSQY Amadede si me kɔ 0.18mm 0.8mm-PC Sinima sesẽwo

HSQY Amadede si me kɔ PC Sesẽ Film 0.18mm-0.8mm

HSQY amadede si me kɔ PC sesẽ film wowɔ tso 100% yeye polycarbonate nu. Esɔ na PC kaɖi nu, polycarbonate overlay film, plastic kaɖi wɔwɔ, laser engraving kaɖiwo, laser tata kaɖiwo, dedienɔnɔ kaɖiwo kple bubu siwo sɔ pɛpɛpɛ plastic film dɔwo.

Polycarbonate rigid film naa nukpɔkpɔ gã, nu nyui aɖe si tsi tre ɖe ŋusẽkpɔɖeamedzi, sesẽ didime liƒo, dzoxɔxɔ nyui tsitretsitsi kple kakaɖedzi le agbalẽtata ƒe dɔwɔwɔ. Woate ŋu atsɔe ana le amadede siwo me kɔ, porcelain ɣi, notsi ɣi kple esiwo wowɔ ɖe ɖoɖo nu siwo ƒe anyigba le gbadzaa, si me tsikpe le, si le keklẽm alo matte.

PC Rigid Film ƒe Adzɔnuwo Ŋuti Nyatakakawo

HSQY naa polycarbonate overlay film kple PC card nu le titrime, amadede kple anyigba ƒe nuwuwu vovovowo me. Woate ŋu awɔ ɖoɖo ɖe eƒe titrime, amadede, anyigba kple agbalẽtata ƒe ɖekawɔwɔ ŋu le asisiwo ƒe nudidiwo nu.

Viɖe Vevi Siwo Le Polycarbonate Rigid Film Ŋu

• Kekeli ƒe kaka si lolo, si ade 88% le glass si le gbadzaa ƒe titrime ma ke me.

• Tsitretsitsi ɖe nu ŋu nyuie ŋutɔ, anɔ abe ahuhɔ̃e tɔ ƒe teƒe 80 ene.

• Yame ƒe nɔnɔme kple UV ƒe tsitretsitsi na dɔwɔwɔ ɣeyiɣi didi kple ɣie dzi ɖeɖe kpɔtɔ.

• Dzoxɔxɔ ƒe tsitretsitsi tso -40°C va ɖo +120°C.

• Xɔ si me kɔ, si ƒe kpekpeme anɔ abe ahuhɔ̃e si ƒe titrime sɔ ene ƒe 1/12 ko.

• Woate ŋu abɔbɔe le vuvɔ me, awɔ thermoformed eye woawɔ dɔ tso eŋu na dɔ vovovowo wɔwɔ.

• Dzo ƒe tsitretsitsi nyui kple B1 dzo ƒe dɔwɔwɔ ƒe dzidzedzekpɔkpɔ.

• Dzɔdzɔmeŋusẽ, mɔ̃ɖaŋu, elektrik kple dzoxɔxɔ ƒe dɔwɔwɔ nyuie ŋutɔ abe mɔ̃ɖaŋudɔwɔwɔ ƒe plastik ene.

Polycarbonate agbalẽ kple PC Film Nuwo ƒe Dɔwɔnawo

Wozãa polycarbonate nu geɖe le elektrɔnikmɔ̃wo, mɔ̃ɖaŋudɔwɔnuwo, atikewɔnuwo, xɔtutu kple kaɖiwo wɔwɔ me. PC rigid films sɔ vevietɔ na kaɖi ƒe nutsyɔtsyɔ, agbalẽtata, laser nuŋɔŋlɔ kple dedienɔnɔ kaɖi ƒe dɔwɔwɔ.

• Elektrɔnikmɔ̃wo: insulating plug-ins, coil frames, tube sockets kple batri ƒe gowo.

• Mɔ̃ɖaŋunuwo: gears, racks, bolts, levers, crankshafts, nutsyɔnuwo kple xɔwo.

• Atikewɔnuwo: kpluwo, pɔmpiwo, aŋetuwo, aɖudɔwɔnuwo kple atikewɔnuwo ƒe akpa aɖewo.

• Xɔtutu: agbalẽ dzi nyawo s siwo me do le, greenhouse glazing, ametakpɔnu kple xɔtunuwo.

• Kpekpeɖeŋugbalẽviwo wɔwɔ: plastik-kaɖiwo, laser-kaɖiwo, laser-tagbalẽviwo kple dedienɔnɔgbalẽviwo.

PC Rigid Film ƒe babla

HSQY naa ametakpɔnu packing na PC rigid films kple polycarbonate agbalẽ dzi nyawo s be woaɖe anyigba ƒe ʋuʋu, deformation kple ʋuɖoɖo ƒe nugbegblẽ dzi akpɔtɔ. Woateŋu awɔ ɖoɖo ɖe nubablɛ siwo wowɔ ɖe ɖoɖo nu ŋu le agbalẽ dzi nyawo ƒe lolome, agbalẽ xatsaxatsa ƒe nɔnɔme kple nudidiwo nu.

Dɔwɔƒea ƒe Ŋgɔdonya

Changzhou Huisu Qinye Plastic Group Co., Ltd. bi ɖe PC board, PC dzidodo board, PC kaka board kple PC agbalẽ dzi nyawo dɔwɔwɔ kple edzadzra me. Dɔwɔwɔ ƒe dɔwɔnawo dometɔ aɖewoe nye nuŋɔŋlɔ, bending, lãɖeɖe pɛpɛpɛ, punching, polishing, banding, thermoforming, blister wɔwɔ le 2.5 * 6 mita me, ABS titri agbalẽvi blister, UV flatbed tata kple screen tata.

Esi HSQY xɔ ƒe 16 kple edzivɔ ƒe nuteƒekpɔkpɔ le nusiwo wodɔna ɖa ta la, enaa nu nyuiwo PC agbalẽ dzi nyawo s , PC sesẽ filmwo kple polycarbonate nu ƒe kuxiwo gbɔkpɔnu siwo wowɔ ɖe ɖoɖo nu na asisiwo le xexeame katã.

Susu le asiwò be nàtia polycarbonate board kple PC rigid film tso Huisu Qinye Plastic Group gbɔ.

Nyabiasewo ƒe Nyabiasewo

Nukae wozãna na PC rigid film?

PC sesẽ film wozãna na plastic kaɖi wɔwɔ, polycarbonate overlay film, laser engraving kaɖiwo, laser tata kaɖiwo, dedienɔnɔ kaɖiwo, elektrɔnik insulation, agbalẽtata kple bubu siwo sɔ pɛpɛpɛ plastic film dɔwo.

Nukae nye dzo ƒe dzidzenu si le polycarbonate agbalẽ dzi nyawo ŋu ?

Polycarbonate-nu ate ŋu aɖo dzo ƒe dzeside B1, si naa dzo ƒe tsitretsitsi nyuie na dɔwɔwɔ siwo hiã mɔ̃ɖaŋununya ƒe plastik-nu siwo le dedie wu.

Ðe polycarbonate mate ŋu agbã oa?

Polycarbonate te ŋu nɔa te ɖe nusiwo adze ame dzi nu ŋutɔ eye wogblɔna zi geɖe be womate ŋu agbãe kloe ne wozãe le mɔ nyuitɔ nu o. Gake womate ŋu aka ɖe edzi be nu aɖeke mate ŋu agbã 100% le nɔnɔme sesẽwo abe wowó alo ballistic impact ene me o.

Ðe mate ŋu atso polycarbonate agbalẽ dzi nyawo s le aƒemea?

Ɛ̃. Woateŋu atsɔ dɔwɔnuwo abe jigsaw, band saw alo fret saw atso polycarbonate agbalẽ dzi nyawo s. HSQY hã naa subɔsubɔdɔ si wotso ɖe lolome nu be wòakpe ɖe asisiwo ŋu woaɖe dɔwɔwɔ ƒe dɔwɔwɔ dzi akpɔtɔ.

Aleke wòle be makɔ polycarbonate agbalẽ dzi nyawo ŋui ?

Klɔ polycarbonate agbalẽ dzi nyawo kple adzalẽtsi dzodzoe kple avɔ falɛfalɛ. Mègazã nusiwo wotsɔna ƒoa nu, atike sesẽwo alo dɔwɔnu siwo me kɔ o elabena woate ŋu agblẽ nu le anyigba ŋu.

Vovototo kae le polycarbonate kple acrylic dome?

Polycarbonate ƒe ŋusẽ te ŋu nɔa te ɖe nu dzi wu sã eye dzo ƒe dɔwɔwɔ nyo wu acrylic. Acrylic sesẽ wu glass gake ate ŋu agbã alo agbã le ŋusẽ me, gake polycarbonate ya sɔ wu na dɔwɔwɔ siwo me woate ŋu aƒo nu le o.

Ðe PC agbalẽ dzi nyawo s ƒe amadede trɔna le ɣeyiɣi aɖe megbea?

Ne UV takpɔnu si me kɔ la, PC agbalẽ dzi nyawo s ate ŋu anɔ te ɖe amadede ƒe tɔtrɔ kple ɣie nu hena gota zazã ɣeyiɣi didi. Subɔsubɔ ƒe agbenɔƒe nɔ te ɖe nusiwo wotsɔ wɔe ƒe grade, UV takpɔkpɔ, eɖoɖo ƒe nɔnɔme kple beléle na wo dzi.

Nyatakaka kawoe hiã na nyayɔyɔ?

Taflatse na titrime si hiã, amadede, anyigba ƒe nuwuwu, lolome alo agbalẽ xatsaxatsa ƒe nɔnɔme, dɔwɔwɔ, agbalẽtata ƒe nudidiwo, agbɔsɔsɔ kple melidzeƒe si woɖo tae. HSQY ate ŋu akafu PC rigid film alo PC agbalẽ dzi nyawo egbɔkpɔnu siwo sɔ.