HSQY Kastom print fud gred BOPET izi peel perforated lidding film fɔ PP PET kɔp trey fɔ strawberry tomato bluberi chɛri frut

BOPET Izi-Pil Perforated Lidding Film fɔ Frut Trey

HSQY de mek kɔstɔm-printed BOPET izi-pil perforated lidding film fɔ PP, APET, RPET ɛn ɔda kɔmpitabl frut ɛn prodyuz trey.

Dɛn mek di fim fɔ pak strawberry, bluberi, chɛri, chɛri tomato, greps, fresh prodɔkt ɛn ɔda prɔdak dɛn we nid fɔ sikyuɔr trey we dɛn jɔyn wit kɔntrol ventileshɔn.

Di opshɔn dɛn we de inklud laser maykro-perforeshɔn, hot-nidul pɔrfɔreshɔn, makro ol, slit vent, anti-fɔg tritmɛnt, ay klia, kɔstɔm printin ɛn sabstret-spɛsifi k izi-pil sil layers.

Di BOPET layt de gi klia, stiffness, dimɛnshɔnal stebiliti ɛn wan say we dɛn kin print. Wan aplikeshɔn-spɛsifi k silan layt de gi adheshon to di sɛlɛkɛt trey flɛnch.

Di sil layt fɔ mach wit di aktual PP, APET, RPET, PET ɔ CPET trey. Wan standad fɔmyulashɔn nɔ fɔ tek am se i sial ikwal to ɛvri trey sabstret, kɔlɔ, risaykul-kɔntinɛnt lɛvɛl ɔ flɛnch tritmɛnt.

Perforated produce film na breathable bay dizayn. I kin gi wan sikrit sil rawnd di trey flɛnch, bɔt dɛn nɔ fɔ diskraib am se i nɔ go ebul fɔ blo ɔlsay ɔ i nɔ de mek wata akɔdin to di wɛb we gɛt pɔt.

Film tiknes frɔm lɛk 0.05mm to 0.10mm de. Wan nominal 0.06mm strɔkchɔ na kɔmɔn prɔjek statin pɔynt, we de ɔnda pankchɔ rɛsistɛns, silin, printin ɛn pɔrfɔreshɔn rikwaymɛnt.

Kɔmɔn rol wit dɛn inklud 150mm, 230mm ɛn 280mm. Kastom wit, rol lɔng, kɔr dayamita, wayndin dairekshɔn ɛn rol wet de fɔ tre-siling mashin dɛn.

Dediket maykrowevable, stim-venting, ay-baria ɛn dual-ovenable CPET lidding film dɛn de as sɛpret strɔkchɔ dɛn. Dɛn pefɔmɛns klem ya fɔ validet yuz di aktual trey, it, ikwipmɛnt ɛn ɔt kɔndishɔn.

Eksplore di komplit HSQY lidding film range fɔ fresh prodɔkt, chilled it, rɛdi it ɛn kɔstɔmayz tre-siling aplikeshɔn.

Rikwest Lidding Film Prayz    Rikwest Trey-Siling Samples

BOPET Lidding Film Imej dɛn

Wetin Na BOPET Izi-Pil Lidin Film?

BOPET izi-pil lidding film na fleksibul pak film we de yuz biaxially oriented polyester as di outa ɔ sɔpɔtin layt ɛn wan aplikeshɔn-spɛsifi k ɔt-sil layt na di tre-kɔntakt sayd.

Di BOPET layt de gi tɛnsiɛl trɛnk, pankchɔ rɛsistɛns, optik klia, dimɛnshɔnal stebiliti ɛn wan fayn sɔfays fɔ rivas ɔ sɔfays printin.

Di silan layt na injinia fɔ bon to wan patikyula trey matirial ɛn rilis pan wan kɔntrol peel fɔs we di kɔshɔma opin di paket.

Wan kɔmplit strɔkchɔ kin inklud BOPET, adeziv, PE, EVA, modifyed polyolefin, anti-fɔg kɔtin, barɛri kɔtin, prayma ɛn printin ink.

Di ɛksaktɔl strɔkchɔ fɔ pik akɔdin to di trey sabstret, di kayn it, di ikwipmɛnt fɔ sial, di tɛmpracha fɔ stɔrɔj, di fɔs we dɛn nid fɔ pul am ɛn di we aw di kɔstɔma dɛn want fɔ yuz am.

Perforated prodyuz film vs. ovenable lid film

Dɛn prɔdak ya nid difrɛn strɔkchɔ ɛn dɛn nɔ fɔ sheb wan yunivasal tɛmpracha, barɛri, silin ɔ pɔrfɔreshɔn spɛsifikɛshɔn.

BOPET Easy-Peel Lidding Film Spɛsifikeshɔn dɛn

Faynal spɛsifikɛshɔn dɛn fɔ bi bay di aktual trey, flɛnch kɔndishɔn, it, silin mashin, stɔrɔj ​​tɛmpracha, pɔrfɔreshɔn patɛn, print dizayn ɛn di opin pefɔmɛns we dɛn nid.

Tray Matirial Kɔmpatibiliti

Trey matirial nem dɛn nɔmɔ nɔ go du fɔ dɛn. Sil pefɔmans kin chenj wit risaykul kɔntinyu, pigmɛnt, minral fil, sɔfayz kɔntaminɛshɔn, flɛnch flatnɛs ɛn spɛsifi k rɛsin fɔmyulashɔn.

Micro-Perforated Lidding Film fɔ Fresh Prodyuz

Fresh frut ɛn vɛjitebul dɛn kin kɔntinyu fɔ blo afta dɛn dɔn pak dɛn bay we dɛn de it ɔksijɛn ɛn pul kabon dayɔgzayd, wata vaypa ɛn ɔt.

Wan paket we nɔ fayn we dɛn sial kin mek di kabon dayɔgzayd we pasmak, we nɔ gɛt bɛtɛ ɔksijɛn, kɔndɛns, fɛminɛshɔn, mold ɔ di kwaliti lɔs kwik kwik wan.

Maykro-perforeshכn de introdכks kalibrayt opin dεm we de inkrεs gas εn mכsichכ transmishכn we dεn de mεnten wan mכst klos protεktiv pakej.

Di ol dayamita we dɛn nid, di ol kwantiti ɛn patɛn dipen pan di prodyuz, fil wet, trey volyum, tɛmpracha, kol-chen profayl ɛn target shelf layf.

Prodyus-Spɛsifi k Pɛrfɔreshɔn Dizayn

Di tebul de gi dizayn kɔnsidareshɔn pas fiks pɔrfɔreshɔn rɛsipɛkt. Shelf-layf trayal yuz di aktual prodɔkt ɛn distribyushɔn kɔndishɔn dɛn nid fɔ de.

Izi-Pil Sil Pɔfɔmɛnshɔn

Wan sil we izi fɔ pul fɔ strɔng fɔ protɛkt di paket we dɛn de pak, transpɔt ɛn rital handel we i de kɔntinyu fɔ izi fɔ di pɔsin we de bay fɔ opin.

If di sil trɛnk smɔl pasmak, i kin mek di sil dɛn opin ɛn i kin mek di sik gɛt prɔblɛm. If di sil trɛnk pasmak, i kin te di fim, i kin mek di tre nɔ fayn ɔ i kin mek i nɔ izi fɔ opin di paket.

Anti-Fɔg Lidin Film

Kɔndenseshɔn kin fɔm we dɛn pak wam tin dɛn, we di paket go insay frij stɔrɔj ​​ɔ we di tɛmpracha de chenj we dɛn de sheb am.

Anti-fog tritmεnt de εp fכ kכndens mכsichכ fכ spre insay wan mכr yunifכm layεr pas fכ fכm dכplεt dεm we yu kin si we de obskכr di prכdak.

Anti-fɔg pefɔmɛns dipen pan di kayn tritmɛnt, di sayd we dɛn de kɔt, di kɔndishɔn we di it-kɔntakt, di humiditi, di tɛmpracha we dɛn de kip ɛn di jɔyometri we dɛn de pak.

Di anti-fɔg layt fɔ fayn fɔ di we aw dɛn want fɔ yuz di it-kɔntakt ɛn i nɔ fɔ ambɔg di ɔt silin, printin ɔ perforeshɔn pefɔmɛns.

Fruit Trey Lidding Film we dɛn print wit kɔstɔm

Kastom printin kin sho logo, prodak nem, nyutrishɔn infɔmeshɔn, traceability kɔd, opin instrɔkshɔn ɛn rital grafik.

Rivas printin kin posishun ink bitwin film layers ɛn ridyus dairekt abrashɔn ɔ fud-kɔntakt ɛksplɔshɔn, sɔbjɛkt to di fim kɔnstrɔkshɔn we yu dɔn pik.

Di artwok fɔ akɔn fɔ di trey silin flɛnch, di say dɛn we di pɔrfɔreshɔn de, di ay mak dɛn, di mashin dairekshɔn, di ripit lɔng, di tab we dɛn pul di tab ɛn di rɛjista we dɛn print.

Lɛbul, ink kɔvarej ɔ varnish nɔ fɔ blok di pɔrfɔreshɔn dɛn we dɛn nɔ want ɔ ridyus di gas-transmishɔn pefɔmɛns we dɛn bin want.

CPET Rɛdi-Mil Lidding Film Rikwaymɛnt dɛn

Dɛn kin pik CPET trey fɔ rɛdi it dɛn we nid fɔ friz, maykrowev ɔt ɔ kɔvɛnshɔnal-ɔvin ɔt.

Wan frut-trey BOPET/PE perforated film nɔ fɔ yuz ɔtomɛtik wan as CPET dual-ovenable lid.

Ovenable lidding nid fɔ gɛt dediket strɔkchɔ we nɔ de ɔt, kɔmpitabl adeziv, ink we nɔ de ɔt ɛn wan sil layt we dɛn mek fɔ di CPET flɛnch.

Di kɔmplit paket fɔ validet yuz di aktual it, trey dimɛnshɔn, fil wet, ɔt tɛm, ɔt tɛmpracha, ɔvin tayp ɛn kɔshɔma instrɔkshɔn.

• Kɔnfɛm if di fim de kɔntinyu fɔ de na di tre we dɛn de kuk ɔ dɛn fɔ pul am.

• Kɔnfɛm if stim vent, laser skɔring ɔ kɔshɔma piercing nid fɔ de.

• Test film shrinkage, curling, brittleness ɛn sial trɛnk afta yu dɔn ɔt.

• Test ink, adhesive ɛn anti-fog stebiliti ɔnda di intended ɔt kɔndishɔn dɛn.

• Kɔnfɛm se di trey flɛnch nɔ de distɔrj ɛn brok di sil we yu de kuk.

• Publish di maksimal hεtin tεmprachכ כnli afta komplit pakej validεshכn.

Fɔd-Kɔntakt Kɔmplians Rikwaymɛnt

Fɔd-kɔntakt kɔmplians fɔ kɔba di kɔmplit lidding-film strɔkchɔ pas fɔ jɔs kɔba di BOPET bays film.

Di asɛsmɛnt fɔ inklud di BOPET rɛsin, silant rɛsin, adeziv, prayma, ink, pigmɛnt, anti-fɔg ɛjɛn, prɔsesin ɛd ɛn ɛni barɛri kɔtin.

Di kɔstɔma dɛn fɔ sho di kayn it, di dairekt ɔ indayrɛkt kɔntakt, di tɛm we dɛn fɔ kip am, di tɛmpracha we dɛn de kip am, di kɔndishɔn fɔ ɔt ɛn di say we dɛn de go na di makit.

Di dɔkyumɛnt dɛn we dɛn kin yuz kin inklud diklareshɔn fɔ kɔmplians, fɔmyulashɔn stetmɛnt, ɔvala maykreshɔn tɛst, spɛshal maykreshɔn tɛst ɛn sɔpɔt rigyuletɔri infɔmeshɔn.

Baria ɛn Shelf-Layf Rikwaymɛnt dɛn

Perforated produk pakej ɛn ay-baria pak de sɔlv difrɛn shelf-layf prɔblɛm dɛn.

Prodyuz film yuz perforations fɔ inkrisayz kɔntrol gas ɛkshɛnj. Fim we gɛt ay barɛri de ridyus di gas ɔ mɔstɔ transmishɔn fɔ protɛkt prɔdak lɛk mit, chiz ɔ it we dɛn dɔn pripia.

Di wan dɛn we de bay we nid fɔ gɛt shelf-layf target fɔ gi di ɔksijɛn-transmishɔn rit we dɛn want, wata-vaypa-transmishɔn rɛt, pak edspɛs, stɔrɔj ​​tɛmpracha ɛn di prɔdak respirashɔn ɔ ɔksidɛshɔn rikwaymɛnt.

Shelf layf fɔ kɔnfyus tru kɔmplit paket tɛst pas fɔ infɛr frɔm di bays-film matirial nɔmɔ.

Risaykul ɛn Matirial Opshɔn dɛn

Wan BOPET/PE laminate gɛt mɔ pas wan polima famili ɛn dɛn nɔ fɔ diskrayb am ɔtomɛtik wan se i kin risaykul na ɛvri makit.

Aktual risaykulbiliti dipen pan layt rεshכ, adeziv, ink, kכt, pεrforeshכn, pakej separeshכn εn lokal kכlekshכn εn prכsεsin infrastכkchכ.

PP-based izi-pil lidding kin evaluet we di kɔstɔma want fɔ impɔtant kɔmpatibiliti wit wan PP trey risaykul strim.

Risaykul klem fɔ bi bays pan di kɔmplit pakej dizayn ɛn wan aplikebul makɛt-spɛsifi k asɛsmɛnt.

Aplikeshɔn dɛn fɔ BOPET Lidding Film

• Strawberry trey: Maykro-perforated, anti-fog film we dɛn mek rawnd di pak wet ɛn kol chen.

• Bluberry trey: Breathable easy-peel film fɔ mek yu ebul fɔ si ɛn kɔntrol di mɔstɔ.

• Chɛri trey: Print ɔ klia perforated film fɔ chill rital pak.

• Chɛri tomato trey: Prodyuz-spɛsifi k ventileshɔn ɛn anti-fɔg opshɔn dɛn.

• Grep trey: Fim we gɛt pɔt we dɛn mek fɔ chenj wet ɛn gas.

• Fresh-kot prodyuz: Kastamayz gas-transmishɔn dizayn ɛn kol-chen validɛshɔn.

• Salad trey: Anti-fog ɛn izi-pil lid we dɛn mach wit PP ɔ PET trey.

• Bekeri trey: Klia ɔ print fim we izi fɔ pul fɔ kol ɔ ambient prodak.

• PP fud trey: PP-kompatibl lidding yuz wan validet sil layt.

• CPET rɛdi it: Dediket nɔ-perforated ɔ stim-venting ovenable lidding film.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• Film strɔkchɔ ɛn raw-matirial verifyeshɔn.

• Total tiknes ɛn individyual layt tiknɛs.

• Rol wit, rol lɔng, rol wet ɛn kɔr dayamita.

• Winding dairekshɔn, rol tɛnsiɔn, tɛliskɔp ɛn ed alaynɛshɔn.

• Tensile strength, elongation ɛn pankchɔ rɛsistɛns.

• Optik klia, haz ɛn glos.

• Printin kɔlɔ, rɛjista ɛn ripit lɔng.

• Ink adhesion, rub resistans ɛn blok.

• Residual-solvent testing usay i apɔynt.

• Perforeshכn dayamita, kwantiti, posishכn εn patεn akכda.

• Ɔksijɛn ɛn wata-vaypa transmishɔn usay dɛn nid am.

• Anti-fog testing na di spɛsifikɛd kol kɔndishɔn dɛn.

• Sil initiashɔn tɛmpracha ɛn ɔpreshɔn sil winda.

• Sial trɛnk yuz di aktual trey.

• Izi-pil fɔs ɛn peel-mɔd inspekshɔn.

• Burst, vacuum, dye-penetration ɔ ɔda lik tɛst we dɛn gri pan.

• Sil-through-contamination testing usay dɛn nid am.

• Kol-stɔrɔj ​​ɛn distribyushɔn tɛst.

• Maykrowev ɛn ɔvin tɛst fɔ dediket ɔt gred dɛn.

• Oval ɛn spɛshal maykreshɔn tɛst usay i apɔynt.

• Pak, palet ɛn kɔntena-lod inspekshɔn.

Kastom Lidding Film Opshɔn dɛn

• di film tiknes frכm lεk 50 to 100 maykron.

• Nominal 60-maykron frut-trey lid film.

• 150mm, 230mm, 280mm ɛn kɔstɔm rol wit.

• Kastamayz rol lɔng, rol wet ɛn kɔr dayamita.

• Fim dɛn we klia, we klia ɛn we dɛn print bay dɛnsɛf.

• Surface ɔ rivas printin we dɛn kin print.

• Laser maykro-pɔrfɔreshɔn.

• Hot-nidul perforeshɔn.

• Makro ol ɛn slit vent dɛn.

• Opshɔnal anti-fɔg tritmɛnt.

• Izi-pil, midul-pil, had-pil ɛn weld-sil opshɔn dɛn.

• Sil layers fɔ PP, APET, RPET, PET ɛn CPET trey dɛn.

• Breathable prodyuz strɔkchɔ dɛn.

• Stɔkchɔ dɛn we gɛt ay barɛri fɔ pak it.

• Dediket maykrowevable ɛn dual-ovenable strɔkchɔ dɛn.

• PP-based mono-material-oriented opshɔn dɛn usay teknik wan fit.

• Kastom katon, lɛbl, palet ɛn shiping mak dɛn.

Infɔmeshɔn we Yu nid fɔ mek yu gɛt Lidding Film Quote

• Trey matirial, spɔlayt ɛn prodak kɔd.

• Tray drawing, flange width ɛn ɔdasay dimɛnshɔn dɛn.

• Trey kala ɛn risaykul-kɔntinɛnt pasɛnt.

• Food prodak ɛn fil wet.

• Pak tempɔret ɛn stɔrɔj ​​tɛmpracha.

• Rikwayd shelf layf ɛn kol-chen profayl.

• Rikwayd film tik ɛn wit.

• Rol lɔng, maksimal rol dayamita ɛn kɔr saiz.

• Winding dairekshɔn ɛn print-sayd ɔriɛnteshɔn.

• Siling-mashin manifakta ɛn mɔdel.

• Sial tɛmpracha, prɛshɔn, tɛm fɔ de ɛn layn spid.

• Rikwayd peel fos ɛn sil mod.

• Maykro-perforeshɔn, makro-hol ɔ slit-vent rikwaymɛnt.

• Target gas-transmishɔn ɔ prodyuz shelf-layf rikwaymɛnt.

• Anti-fog rikwaymɛnt ɛn tɛst kɔndishɔn dɛn.

• Printin artwok, kala kɔnt ɛn ripit lɔng.

• Maykrowev, friza ɔ ɔvin-yuz kɔndishɔn dɛn.

• Rigyuleshɔn ɛn dɔkyumɛnt dɛn we dɛn nid fɔ kɔntakt fɔ it.

• Initial kwantiti ɛn ɛstimat ɛni ia dimand.

• Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu Trey ɛn Fim Rikwaymɛnt dɛn

BOPET Lidding Film Data Sheet we de na di fim

Daunlod di BOPET lidding film data sheet we de dɔŋ ya.

Bifo yu pablish dis link, kɔnfɔm se di PDF de na di rod we yu dɔn tɔk bɔt ɛn di dɔkyumɛnt de sho di fim strɔkchɔ, di we aw di tre go kɔmpit, di we aw dɛn de tɛst am ɛn di tɛmpracha kɔndishɔn dɛn we dɛn go yuz.

   Daunlod BOPET Lidding Film Data Sheet

Prodakshɔn ɛn Pak Imej dɛn

Pak ɛn Delivri

Sampul pak: Dɛn kin pak smɔl rol ɛn film sɛmpul dɛn insay bag dɛn we de protɛkt ɛn rigid katon dɛn.

Rol protɛkshɔn: Dɛn kin rap rol wit PE film, baria bag, kraft pepa ɔ ɔda tin dɛn we dɛn gri fɔ protɛkt.

Kor ɛn edj protɛkshɔn: Dɛn kin protɛkt di rɔl ɛnd ɛn kɔr fɔ ridyus di krɔsh, kɔntaminɛshɔn ɛn ed damej.

Palet pak: Na lɛk 500-1000kg kin lod pan plai wud ɔ fumigation-fri palet akɔdin to di rol dimɛnshɔn ɛn di limit fɔ handel.

Kɔntena lod: Wan rɛfrɛns lod kwantiti na lɛk 20 tan, we de ɔnda di palet kɔnfigyushɔn, kɔntena limit ɛn ligal wet ristrikshɔn.

Stɔrej: Stɔr di rol dɛn insay os insay klin, dray kɔndishɔn fa frɔm dairekt san layt, ɔt pasmak, mɔstɔ, dɔst ɛn strɔng smel.

Dilivri tɛm: EXW, FOB, CNF, CIF, DDU ɛn ɔda Incoterms we dɛn gri fɔ de.

Lid tɛm: Standart prodakshɔn jɔs nid lɛk 10-12 wok dez afta dɛn dɔn kɔnfyus di strɔkchɔ, artwok, trayal rizɔlt, dipɔsit ɛn pak.

Sɛtifiket ɛn Kɔmplians Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt tɛknikal data shit, sefty data shit, diklareshɔn fɔ kɔmplians, maykreshɔn ripɔt, ristrikt-sɔbstans ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Dɛn fɔ diskrayb SGS akɔdin to di ɛksaktɔ tɛst we dɛn du ɛn dɛn nɔ fɔ prɛzɛnt am as yunivasal fud-sefty, ovenability, anti-fog ɔ risaykul sɛtifiket.

ISO 9001 gɛt fɔ du wit di manifakta in kwaliti-mɛnejmɛnt sistɛm ɛn i nɔ de indipɛndɛnt fɔ establish fud-kɔntakt, silin, pil, maykrowev ɔ ɔvin pefɔmɛns.

ISO 9001:2008 dɔn pul am. Di sɛtifiket vɛshɔn we de naw, di pɔsin we gɛt am, di adrɛs we dɛn mek am, di sɛtifiket skɔp ɛn di tɛm we di sɛtifiket de wok, dɛn fɔ chɛk am bifo dɛn pablish am.

Ɛvri ripɔt fɔ kɔrɛkt to di ɛksaktɔl fim strɔkchɔ, print sistɛm, pɔrfɔreshɔn patɛn, trey sabstret ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz.

HSQY Globɛl Ɛgzibishin dɛn

Wetin Mek Yu Pik HSQY as Yu Lidding Film Supplier?

• BOPET izi-pil lidding film fɔ PP ɛn PET-based trey.

• Perforated prodyuz film fɔ bɛri, frut ɛn vɛjitebul.

• Laser maykro-perforeshכn, hot-nidul pεrforeshכn εn makro ol dεm.

• Opshɔnal anti-fɔg ɛn ay-klariti pefɔmɛns.

• Strukchɔ dɛn we klia ɛn we dɛn print bay dɛnsɛf.

• Substrate-spɛsifi k izi-pil sil layers.

• Kastom film tik, wit, lɔng, kɔr ɛn wayndin dairekshɔn.

• Dediket chilled, baria, maykrowevable ɛn ovenable gred dɛn.

• Trayal rol fɔ tray-siling ɛn shelf-layf tɛst.

• Kastomiz rol lebul, katon ɛn palet pak.

• Intanɛshɔnal B2B prodakshɔn ɛn ɛkspɔt sɔpɔt.

Bifo dɛn prodyuz bɔku bɔku wan, HSQY se yu fɔ tɛst di fim we yu dɔn pik yuz di kɔstɔma in aktual trey, siling mashin, it, stɔrɔj ​​kɔndishɔn, printin dizayn ɛn distribyushɔn prɔses.

Kontakt HSQY fɔ Trial Rol ɛn Prayz

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt BOPET Lidding Film

Wetin na BOPET izi-pil lidding film?

Na trey-siling film we de yuz BOPET sɔpɔt layt ɛn kɔntrol-pil ɔt-sil layt we mach wit di tre matirial.

Wetin izi fɔ pul am min?

I izi fɔ pul di lid min se yu kin pul di lid we dɛn sial bay we yu yuz kɔntrol fɔ opin we nɔ gɛt bɔku film tear, trey damej ɔ sil rɛsɛdyu.

Wan liding film de sial PP, PET ɛn CPET trey dɛn?

Wan film famili kin inklud vɛshɔn fɔ sɔm trey matirial dɛn, bɔt di ɔt-sil layt fɔ mach ɛn tɛst wit di aktual trey sabstret.

Dis fim kin sial APET ɛn RPET frut trey dɛn?

Yes, we dɛn yuz wan PET-kɔmpatibl sil layt ɛn dɛn validet di sil trɛnk wit di aktual APET ɔ RPET trey.

Dis film kin sial PP trey dɛn?

Yes, yuz wan PP-kompatibl silan strɔkchɔ ɛn validet silin tɛmpracha, prɛshɔn, tɛm ɛn peel-fɔs rɛnj.

Wetin na perforated lidding film?

Na liding film we gɛt kɔntrol maykro ol, makro ol ɔ vent we de alaw gas ɛn mɔstɔ fɔ chenj tru di paket.

Wetin mek dɛn kin yuz fim we gɛt pɔt fɔ pak frut?

Fresh prodɔkt kin kɔntinyu fɔ blo afta dɛn dɔn pak am. Pɔrfɔreshɔn kin ɛp fɔ balans ɔksijɛn, kabɔn dayɔgzayd ɛn mɔstɔ insay di paket.

Yu tink se di fim we gɛt lid we gɛt pɔt nɔ kin mek di briz nɔ go insay?

Nɔ, di flɛnch sil kin sikrit, bɔt di fim we gɛt pɔt kin mek pɔsin blo bay wilful ɛn i nɔ kin mek di briz krɔs di wɛb.

Yu tink se frut fim we gɛt pɔrfɔt nɔ kin lik?

Di flɛnch sil kin tɛst fɔ integriti, bɔt pɔrfɔreshɔn dɛn de alaw gas ɛn pɔtɛnɛshɛl likwid pasej ɛn dɛn nɔ fɔ diskrayb am as kɔmplit likwid-tayt.

Wetin na di difrɛns bitwin maykro ɛn makro pɔrfɔreshɔn?

Maykro-perforeshɔn na smɔl kɔntrol ol dɛn we dɛn kin yuz fɔ kalibrayt gas ɛkshɛnj, we makro ol dɛn kin gi big big ventileshɔn we pɔsin kin si.

Aw dɛn kin pik di pɔrfɔreshɔn patɛn?

Dɛn kin pik am akɔdin to di kayn prodyuz, pak wet, trey volyum, stɔrɔj ​​tɛmpracha, kol-chen profayl ɛn shelf layf we dɛn nid.

Yu tink se di sem pɔrfɔreshɔn fayn fɔ strawberry ɛn bluberi?

Nɔto fɔ se na so i bi. Difrɛn kayn prodɔkt, pak saiz ɛn kol-chen kɔndishɔn kin nid difrɛn ol saiz, kɔnt ɛn patɛn.

Yu tink se anti-fog tritmɛnt de?

Yɛs. Fɔd-kɔntakt-suitable anti-fɔg tritmɛnt kin de fɔ kol frut, prodɔkt ɛn ɔda frij pak.

Yu tink se anti-fɔg fim de mek di kɔndenseshɔn nɔ kam kpatakpata?

Anti-fog tritmɛnt de ridyus di drɔp dɛn we pɔsin kin si, bɔt di pefɔmɛns stil dipen pan di prɔdak in tɛmpracha, di humidity, kol-chen chenj ɛn di paket dizayn.

Yu tink se dɛn kin print di fim we de na di lid bay kɔstɔm?

Yɛs. Yu kin print logo, infɔmeshɔn bɔt di prɔdak, instrɔkshɔn fɔ opin, trasibiliti grafik ɛn rital dizayn.

Yu tink se we dɛn de print fɔ blok di ol dɛn we de mek di pɔt dɛn?

At wok, lɛbl ɔ kɔtin kin ambɔg di perforeshɔn, so di print ɛn perforeshɔn pozishɔn fɔ rɛjista we dɛn de disayn.

Us tik tik dɛn de?

Kastom tiknes frɔm lɛk 0.05mm to 0.10mm de, wit 0.06mm we dɛn kin yuz as prɔjek statin pɔynt.

Us rol wit dɛn de?

Di kɔmɔn wit dɛn inklud 150mm, 230mm ɛn 280mm. Di kɔstɔm wit dɛn kin slit akɔdin to di trey ɛn mashin dimɛnshɔn.

Us rol lɔng de?

Wan rɛfrɛns rol lɔng na lɛk 500m, wit kɔstɔmayt lɔng dɛn we de akɔdin to di mashin ɛn hanlin rikwaymɛnt dɛn.

Yu kin yuz dis BOPET/PE film na 220°C?

Wan standad BOPET/PE frut-film strɔkchɔ nɔ fɔ ɔtomɛtik rayt fɔ 220°C. Kɔnvɛnshɔnal-ɔvin yuz nid fɔ gɛt wan dediket ɔvinable strɔkchɔ ɛn kɔmplit paket tɛst.

Yu tink se dɛn kin yuz dis fim na maykrowev?

Yuz maykrowev nid fɔ gɛt wan dediket strɔkchɔ, kɔmpitabl trey ɛn validet stim-venting ɛn ɔt instrɔkshɔn dɛn.

Yu tink se dɛn kin yuz di fim na friza?

Yuz friza pɔsibul ɔl afta dɛn dɔn tɛst di film, sil ɛn trey fɔ brit, sil ritɛnshɔn ɛn opin pefɔmɛns na di tɛmpracha we dɛn nid.

Yu tink se BOPET lidding film it sef?

Fɔd-kɔntakt suitabiliti dipen pan di kɔmplit film strɔkchɔ, it we dɛn want, tɛmpracha, kɔntakt durayshɔn ɛn dɛstineshɔn-maket rigyuleshɔn.

Yu tink se SGS ripɔt de pruv se dɛn de fala di lɔ we pɔsin kin gɛt wit it?

Na we di ripɔt kɔba di ɛksaktɔl fim strɔkchɔ, aplikebul rigyuleshɔn, it simulɛnt ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz.

ISO 9001 pruv se di fim na fud gred?

Nɔ ISO 9001 na kwaliti-mɛnejmɛnt-sistim standad ɛn i nɔ de pruv indipɛndɛnt wan se i de fala di tin dɛn we pɔsin kin du wit it-kɔntakt.

Yu tink se BOPET/PE lidding film yu kin risaykul?

BOPET/PE na laminat we gɛt bɔku tin dɛn ɛn i nɔ fɔ mek dɛn tɔk am ɔtomɛtik wan se i kin risaykul. Kɔmpatibiliti dipen pan di kɔmplit strɔkchɔ ɛn lokal risaykul sistɛm.

Yu tink se wan mono-material lidding film de?

PP-based mono-material-oriented lidding options kin bi evaluate fɔ PP trey we dɛn sial, klia, barɛri ɛn prɔsesin rikwaymɛnt dɛn alaw.

Wetin na di minimum ɔda kwantiti?

Di rεfrεns MOQ na aprכksimatli 500kg. Kastom printin, sil layers, width ɛn perforation dizayn kin nid difrɛn kwantiti.

Yu tink se trial rol dɛn de?

Film samplε dεm we de naw εn limited trial rol dεm kin de fכ sil, pil, pεrforeshכn εn shelf-layf tεst.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshɔn jɔs nid lɛk 10-12 wok dez afta dɛn dɔn kɔnfyus di strɔkchɔ, artwok, sɛmpul, dipɔsit ɛn pak.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di trey matirial, dimɛnshɔn, fim wit, it prodak, silin kɔndishɔn, pɔrfɔreshɔn, anti-fɔg, printin, kwantiti, pak ɛn ples fɔ go.

Get wan BOPET Lidding Film Quote

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae izi-pil lid film, perforated prodyuz film, anti-fog film, CPET trey, PP trey, PET fud kɔntena ɛn kɔstɔmayz it-pak matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt frut pak, fud prɔsesɔ, tre manifakta, pak kɔnvɔta, impɔt ɛn distribyushɔn wit matirial sɛlɛkshɔn, tre-silin sɛmpul, kɔstɔmayz printin, prodakshɔn, inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ Kot ɛn Trayal Rol