HSQY 0.06mm Printable Sial Film Rol Suppliers Fɔ CPET Fɔd Trey

Wetin Na 0.06mm Printable Lidding Film fɔ CPET Trey?

0.06mm printable lidding film na 60-maykron fleksibul siling film we dɛn mek fɔ kɔmpitabl CPET fud trey ɛn dɛn de saplae insay kɔstɔm-wid rol fɔ tre-siling ikwipmɛnt. Di PET ɔ BOPET ɔda layt de gi klia, dimɛnshɔnal stebiliti, ɛn wan say we dɛn kin print, we di aplikeshɔn-spɛsifi k insay layt de gi di ɔt-sil ɛn di peel pefɔmɛns.

Kastom printin de alaw di wan dɛn we de mek it ɛn prayvet-lɛbul brand dɛn fɔ put logo, prɔdak nem, ingridiɛnt, instrɔkshɔn fɔ kuk, deti-kɔd eria, traceability infɔmeshɔn, prɔmoshɔnal grafik, ɛn handel instrɔkshɔn dairekt pan di lidding film.

Di las strɔkchɔ we dɛn print fɔ validet wit di aktual trey, siling mashin, artwok, ink, adeziv, it prodak, stɔrɔj ​​kɔndishɔn, ɛn ɔt saykl. Wan standad BOPET/PE film nɔ fɔ ɔtomɛtik diskrayb se i kɔmpitabl wit ɛvri CPET, PET, PP, maykrowev, friza, ɔ kɔvɛnshɔnal-ɔvin aplikeshɔn.

Wetin Mek Yu Yuz Kastɔm ​​Print Liding Fim?

• Brand visibility: Grafik dɛn we dɛn print kin tɔn di lid to praymar branding surface.

• Infɔmeshɔn bɔt di wan dɛn we de bay: Dɛn kin put instrɔkshɔn dɛn fɔ kuk, gayd fɔ kip di tin dɛn, di tin dɛn we dɛn fɔ yuz fɔ kuk, wɔnin dɛn, ɛn di stɛp dɛn fɔ pripia insay di dizayn.

• Traceability: Dɛn kin put dediket eria fɔ batch kɔd, de, barɔd, QR kɔd, ɛn vayriɔbul data.

• Ridyus sɛkɔndari lɛbl dɛn: Dairekt fim printin kin ridyus di nid fɔ gɛt sɛpret prɛshɔn-sɛnsitiv lɛbl dɛn, we dɛn kin du di las dizayn fɔ pak di tin dɛn.

• Ritayl difrɛns: Ay-glos, mat, transparent-windo, ɛn sɛlɛktiv-print kɔnsɛpt kin mek di shelf prɛzɛntɛnshɔn bɛtɛ.

• Kɔnsistɛns rɛjista: Dɛn kin mek di ripit lɔng we dɛn print ɛn di ay mak dɛn mach wit di tre-sila kɔt sistɛm.

• Kastom funkshɔnaliti: Yu kin jɔyn printin wit izi peel, anti-fɔg, ay barɛri, MAP, ɛn sɔm ɔvinable strɔkchɔ dɛn.

0.06mm Printable Sial Film Spesifikasi

Di infɔmeshɔn we de dɔŋ ya de sho di kɔmɛnt kɔnfigyushɔn fɔ dis pej naw. Faynal printin spɛsifikɛshɔn, tolɛreshɔn, sil pefɔmɛns, tɛmal suitabiliti, kɔmplians dɔkyumɛnt, ɛn artwok aprɔval fɔ kɔnfɔm bifo dɛn prodyuz.

Aw Wan Print Liding-Fim Strukchɔ De Wok

Di we aw fɔ Print ɛn di we aw fɔ Dizayn

Artwok ɛn Prepress Rikwaymɛnt dɛn

Fɔ pripia di at wok kɔrɛkt wan impɔtant bikɔs di ripit we dɛn print fɔ alaynɛd ​​wit di tre-sila tul ɛn di pozishɔn we dɛn de kɔt. Saplae vektɔ artwok we yu kin ɛdit ɛnitɛm we i pɔsibul ɛn no ɔl di font dɛn, pikchɔ dɛn we gɛt link, barɔd dɛn, spɔt kɔlɔ dɛn, ɛn transparency ifɛkt dɛn.

• Atwok fɔmat: Dɛn kin lɛk fɔ ɛdit AI, EPS, ɔ PDF fayl dɛn we rɛdi fɔ print.

• Kɔlɔ rɛfrɛns: Gi Pantone, CMYK, ɔ fizik kɔlɔ standad dɛn we dɛn dɔn gri fɔ.

• Print ripit: Tɔk di ripit lɔng we di trey ɛn di tin we dɛn de kɔt nid.

• Ay mak: Kɔnfɔm saiz, kɔlɔ, pozishɔn, ɛn distans frɔm di wɛb ed.

• Zon dɛn we nɔ gɛt sil: Kip impɔtant tɛks ɛn grafik dɛn fa frɔm di say dɛn we dɛn sial ɛn kɔt.

• Bakɔd ɛn QR verifyeshɔn: Test di kɔd ridabiliti afta yu print, sial, stɔrɔj, ɛn ɔt.

• Teks ɛn rigyuletɔri rivyu: Di pɔsin we bay fɔ gri fɔ di tin dɛn we dɛn yuz fɔ mek di it, di wɔnin dɛn, di tin dɛn we de insay di it, di instrɔkshɔn dɛn fɔ kuk, ɛn di langwej we dɛn fɔ yuz.

• Pruf aprɔval: Apruv di dijital pruf, kɔlɔ pruf, print layout, winding dairekshɔn, ɛn rol lɛbl bifo mas prodakshɔn.

Print Kwaliti ɛn Rɛjista Kɔntrol

• Kɔlɔ kɔnsistɛns: Gri wit akseptabl kɔlɔ tolɛreshɔn ɛn rɛfrɛns standad.

• Rejista akchualiti: Spɛsifik akseptabl muvmɛnt bitwin kɔlɔ ɛn bitwin print ɛn kɔt pozishɔn.

• Ink adhesion: Test tep adhesion, rub resistance, ɛn resistance to condensation, ɔyl, friz, ɛn ɔt.

• Blɔk rɛsistɛns: Kɔnfɛm print rol dɛn unwind klin wan witout ink transfa bitwin layers.

• Grafik oriɛnteshɔn: Verifay di say we yu de rid, di say we yu de print insay/ɔdasay, di say we yu de sil, ɛn di say we yu de waynd.

• Di we aw di wɔl de luk: Difayn di pinhol dɛn, strik dɛn, skrat dɛn, jel dɛn, kɔntaminɛshɔn, ɛn print dɛfɛkt dɛn we dɛn kin aksept.

• Variable coding area: Rizav wan fayn say fɔ thermal-transfer, inkjet, laser, ɔ ɔda kɔdin sistem dɛn we nid de.

Izi-Pil, Midul-Pil, ɛn Wɛld-Sil Opshɔn dɛn

Tray Matirial Kɔmpatibiliti

Di ɔda layt we dɛn print nɔ de sho us trey di fim go sial. Di kɔmpatibiliti de kɔntrol mɔ bay di silin layt, trey flɛnch, ɛn di silin kɔndishɔn.

Anti-Fɔg, Ay-Baria, ɛn MAP Opshɔn dɛn

Anti-fog tritmɛnt de ɛp fɔ ridyus di kɔndenseshɔn ɛn fɔ mek pipul dɛn si di it we dɛn pak. I rili impɔtant we di dizayn we dɛn print gɛt wan winda we de mek pɔsin si di prɔdak klia wan.

Di fim dɛn we dɛn print we gɛt ay barɛri kin gɛt EVOH ɔ ɔda barɛri layt fɔ mek dɛn pak di atmosfɛs we dɛn dɔn chenj. Di wan dɛn we de bay fɔ gi di target OTR, WVTR, gas miksɔp, stɔrɔj ​​tɛmpracha, di kayn it, ɛn di shelf layf we dɛn nid.

Print Film fɔ Ovenable ɛn Maykrowevable CPET Trey

We dɛn de print, dɛn kin ad ink, adeziv, kɔtin, ɛn sɔntɛnde lak to di fim strɔkchɔ. Ɛni kɔmpɔnɛnt fɔ stil fayn di tɛm we dɛn want fɔ mek di maykrowev ɔ kɔvɛnshɔnal-ɔvin saykl. Di tɛmal retinj fɔ di CPET trey nɔ fɔ ɔtomɛtik aplay pan di lid we dɛn print.

Fɔ aplikeshɔn dɛn we dɛn dɔn ɔt, gi di maksimal tɛmpracha, di tɛm we dɛn de ɔt, if di fim de na di tre we dɛn de kuk, di kayn it we dɛn de it, di wet we dɛn ful-ɔp, di we aw dɛn fɔ pul di briz, di kɔndishɔn fɔ kip di tin dɛn, ɛn di tin dɛn we dɛn nid fɔ gɛt fɔ kɔntakt it na di say we dɛn want fɔ go na di makit.

Tipik Aplikeshɔn dɛn

• Kastom-branded CPET rɛdi it dɛn

• Frɔzɛn it ɛn tin dɛn we dɛn kin yuz fɔ pripia fɔ it

• Aylayn, relwe, ɔspitul, skul, ɛn institiushɔnal ketɛning

• Prayvet-lɛbul supamakit rɛdi it dɛn

• Trey dɛn fɔ it we gɛt bɔku bɔku kɔmpawtmɛnt dɛn

• Bekeri prodak, dɛzat, deli it, ɛn snek dɛn we dɛn dɔn pripia

• MAP ɛn ɛkstend-shɛlf-layf it pak

• Prodakt dɛn we nid fɔ print infɔmeshɔn fɔ kuk, fɔ kip, ɔ fɔ tray fɔ no

Eksplɔrɔ HSQY dɛn CPET trey renj ɛn CPET siling film sɔlvishɔn fɔ divɛlɔp wan kɔmpitabl print tre-ɛn-film pakej.

Tray-Sealer Kɔmpatibiliti ɛn Layn Tɛst

Di fim we dɛn print fɔ trak, rɛjista, sial, ɛn kɔt ɔltɛm wit spid we dɛn de mek. Kɔnfɛm di mashin brand, mɔdel, kɔr dayamita, maksimal ɔta dayamita, wayndin dairekshɔn, ay-mak sɛns, wɛb pat, ɔpreshɔn spid, tɛmpracha, prɛshɔn, ɛn tɛm fɔ de.

Bifo mas prodakshɔn, tɛst print rɛjista, ay-mak ditekshɔn, kɔd ridabiliti, wɛb trak, kɔt pozishɔn, sil kɔntinyuiti, pil fɔs, lik, ink adheshon, rɔb rɛsistɛns, blɔk, anti-fɔg pefɔmɛns, friza pefɔmɛns, MAP ritɛnshɔn, maykrowev pefɔmɛns, ɛn ɔvin pefɔmɛns we i apɔynt.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Gi dɛn infɔmeshɔn ya so dat HSQY go ebul fɔ pripia di kɔrɛkt print-fim strɔkchɔ, artwok layout, ɛn kɔmɛshɔnal kot:

1. Trey matirial, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul

2. Trey ɔdasay dimɛnshɔn, flɛnch wit, kɔmpawtmɛnt, ɛn fil wet

3. Trey-siling mashin brand, model, tul layout, ay-mak sistem, ɛn opareshɔn spid

4. Tiknes we yu nid, rol wit, lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn waynd dairekshɔn

5. I izi fɔ pul, midul-pil, ɔ weld-sil rikwaymɛnt

6. Atwok fayl, di nɔmba fɔ di kɔlɔ dɛn, di we aw dɛn print am, di lɔng we dɛn ripit am, di say we dɛn de mek di ay-mak, ɛn di we aw dɛn go ebul fɔ rɛjista

7. Surface print ɔ rivas print rikwaymɛnt

8. Di kayn it we dɛn kin it, di tɛmpracha we dɛn kin ful-ɔp, di kɔndishɔn we dɛn kin kip am, ɛn di tɛm we dɛn want fɔ kip di it

9. Friza, maykrowev, kɔvɛnshɔnal ɔvin, MAP, hot-fil, pasteurization, ɔ retort prɔses

10. Anti-fɔg, barɛri, transparent winda, pɔrfɔreshɔn, vent, barɔd, ɔ kɔdin rikwaymɛnt

11. Trayal kwantiti, diman we dɛn kin aks fɔ ɛvri ia, usay dɛn kin sɛn di tin, ɛn di de we dɛn aks fɔ lanch

Rikwest Print Fim Sampul ɛn Prayz

Kastom Printable Lidding-Film Savis dɛn

• Kastom tik, waid, lɔng, kɔr, rol wet, ɛn ɔda dayamita

• Fleksografik ɔ gravu printin we de ɔnda di artwok ɛn ɔda tin dɛn we dɛn nid

• Surface printing ɔ rivas printin akɔdin to di fayn laminat

• Kastom kɔlɔ separeshɔn, print ripit, ay mak, ɛn transparent winda

• I izi-pil, midul-pil, ɛn weld-sil pefɔmɛns

• Anti-fɔg, ay-baria, MAP, friza-kɔmpatibl, ɛn aplikeshɔn-spɛsifi k ɔvinable gred dɛn

• Kastom katon, rol lɛbl, palet mak, ɛn prayvet-lɛbul ɛkspɔt pak

• Atwok rivyu, pruf aprɔval, trey kɔmpatibiliti tɛst, ɛn prodakshɔn-layn trayal sɔpɔt

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi kwaliti-mɛnejmɛnt, inspekshɔn, fim, ink, adeziv, ɛn it-kɔntakt dɔkyumentri we de fɔ di strɔkchɔ we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di tɛknikal data shit, sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, print-aprɔval rɛkɔd, ɛn rol inspekshɔn krayteria we dɛn nid fɔ di dɛstineshɔn makit.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifiket ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ sef fɔ it-kɔntakt. Dɛn fɔ ebul fɔ no if di fim we dɛn print de fala fɔ di kɔmplit film, ink, adeziv, kɔtin, di kayn it, di kɔndishɔn we dɛn de kip am, ɛn di we aw dɛn de ɔt am.

HSQY Intanɛshɔnal Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

Pak ɛn Delivri

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm

Wetin di fim we dɛn kin print fɔ lid min?

Liding film we yu kin print gɛt ɔda say ɔ intanɛnt print layt we dɛn mek fɔ gɛt grafik, tɛks, barɔd, instrɔkshɔn fɔ kuk, ɛn branding we i de kip di tre-siling pefɔmɛns we dɛn nid.

0.06mm na di sem wit 60 maykron?

Yɛs. wan milimita ikwal to 1,000 maykron, so 0.06mm ikwal to 60 maykron. Di akseptabl manufakchurin tolɛreshɔn fɔ de na di aprɔv spesifikeshɔn.

Us we dɛn de fɔ print?

Dɛn kin ebul fɔ no aw fɔ print fleksografik ɔ gravyu akɔdin to di kwaliti fɔ di at wok, di nɔmba fɔ di kɔlɔ dɛn, di we aw dɛn kin print am, di volyum we dɛn kin print ɛvri ia, ɛn di tin dɛn we dɛn nid fɔ du na di kɔmɛshɔn.

Wetin na di difrɛns bitwin sɔfayz printin ɛn rivas printin?

We dɛn print di fim na di say we di fim de, i kin put di ink na do. Rivas printin de put di ink na di insay fes fɔ di ɔda PET layt ɛn trap am insay di laminat, we de protɛkt di grafik frɔm abrashɔn.

Yu tink se dɛn kin put transparent winda dɛn insay di dizayn?

Yɛs. Di say dɛn we dɛn dɔn pik kin stil de we dɛn nɔ print so dat di wan dɛn we de bay kin si di prɔdak. Di winda pozishɔn, di anti-fɔg rikwaymɛnt, ɛn di print rɛjista fɔ kɔnfɔm.

Yu tink se dɛn kin print barɔd ɛn QR kɔd na di fim?

Yɛs, bɔt di kɔd saiz, kɔntrast, kwayɛt zon, print kwaliti, distɔjyushɔn, ɛn skan pefɔmɛns fɔ validet afta dɛn print, sial, stɔrɔj, ɛn ɔt.

Yu tink se dɛn kin yuz fim we dɛn print pan CPET trey dɛn?

Yes, we di silan layt kɔmpitabl wit di aktual CPET trey ɛn di print laminat fayn fɔ di saykl we dɛn want fɔ kip ɛn ɔt.

Yu tink se fim we dɛn kin print fɔ lid we izi fɔ pul kin de?

Yɛs. Dɛn kin ebul fɔ evalyu di wan dɛn we izi fɔ pul, we gɛt midul, ɛn weld-sil. Di target peel fos fɔ test wit di aktual trey ɛn prodakshɔn sɛtin.

Yu tink se anti-fog print lidding film de?

Yɛs. Dɛn kin jɔyn anti-fɔg tritmɛnt wit fim we dɛn print, inklud dizayn dɛn we gɛt transparent winda fɔ si fɔ it dɛn we dɔn kol.

Yu tink se dɛn kin gi fim we dɛn print fɔ mek dɛn pak di MAP?

High-barrier printed structures kin bi evaluet fɔ MAP. Gi di OTR, WVTR, gas miksɔp we dɛn nid, di kɔndishɔn fɔ stɔrɔj, di kayn it, ɛn di shelf-layf target.

Yu tink se yu kin yuz standad print BOPET/PE film na 220°C?

I nɔ fɔ tek am se ɛvri BOPET/PE laminat we dɛn print fayn fɔ 220°C. Di fim, ink, adeziv, kɔtin, trey, it, tɛmpracha, ɛn di tɛm we dɛn de ɔt fɔ validet togɛda.

Us artwok fayl dɛn a fɔ gi?

Dɛn kin lɛk AI, EPS, ɔ PDF fayl dɛn we rɛdi fɔ print. Inklud linked imej, font, Pantone ɔ CMYK rɛfrɛns, ripit lɔng, ay-mak pozishɔn, transparent winda, ɛn rigyuletɔri tɛks.

Wetin na di MOQ fɔ kɔstɔm print fim?

Di fim MOQ we dɛn dɔn tɔk naw na 500kg, bɔt print-film MOQ kin dipen bak pan artwok, kɔlɔ kɔnt, di we aw dɛn print, di rol wit, ɛn di tin dɛn we dɛn nid fɔ print-tul.

A kin aks fɔ sampul we dɛn print bifo a prodyuz bɔku bɔku wan?

Dɛn kin tɔk bɔt wan trial ɔ pruf prɔses. Di sampul fɔmat we de dipen pan di artwok, di we aw dɛn print am, di we aw dɛn mek di fim, di tul dɛn, ɛn di kwantiti we dɛn nid.

Aw dɛn fɔ kip di lid-film rol dɛn we dɛn print?

Stɔr di rol dɛn na di fɔs tin we dɛn bin dɔn pak fɔ protɛkt dɛn na say we klin ɛn dray we nɔ gɛt san, ɔt, mɔs, dɔst, sɔlvɛnt, ɛn strɔng smel. Alaw di rol dɛn we dɛn dɔn kol kol fɔ aklimatiz bifo yu opin.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae CPET, PET, PP, ɛn ɔda it trey dɛn togɛda wit printabl lidding film, fleksibul pak film, plastic sheet, ɛn rilat pak prodak fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt fim-grɛd sɛlɛkshɔn, artwok rivyu, print-ripit planin, rol kɔnvɛnshɔn, pil-fɔs divɛlɔpmɛnt, anti-fɔg ɛn barɛri sɛlɛkshɔn, sɛmpul, layn tray, inspekshɔn dɔkyumɛnt, ɛkspɔt pak, ɛn intanashɔnal delivri fɔ it manifakta, prayvet-lɛbul brand, kɔntrakt pak, pak distribyushɔn, aylayn keta, ɛn institiushɔnal fud-savis saplayers.

Kontakt HSQY fɔ Print Lidding Film