HSQY 0.06-0.1mm Top Silin Film Manufacturer BO PET/PE Pakɛj Silin Film s

Wetin Na BO PET/PE Top Silin Film?

BO PET/PE top siling film na laminated lidding film we dɛn kin yuz fɔ klos kɔmpitabl it trey dɛn ɛn kɔntena dɛn pan tre -siling ikwipmɛnt. Di BOPET ɔda layt de gi klia, stiffnɛs, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, ɛn wan say we dɛn kin print, we di PE-based insay layt de gi ɔt-sil pefɔmɛns.

HSQY de mek ɛn kɔnvɔyt BO PET/PE lidding-film rol dɛn insay nominal tiknɛs frɔm 0.06mm to 0.10mm , wit standad wit we na 150mm, 230mm, ɛn 280mm ɛn kɔstɔm wit we de. Dɛn kin mek klin, print, izi-pil, midul-pil, wɛld-sil, anti-fɔg, ay-baria, friza-kɔmpatibl, ɛn aplikeshɔn-spɛsifi k ɔt-tritabl gred dɛn.

Teknik not: BO PET/PE nɔto yunivasal strɔkchɔ fɔ ɛvri tre ɔ tɛmal prɔses. Sil kɔmpatibiliti dipen pan di tre flɛnch, siling layt, tɛmpracha, prɛshɔn, tɛm fɔ de, ikwipmɛnt, it prodak, stɔrɔj ​​kɔndishɔn, ɛn ɔt saykl. Kɔnvɛnshɔnal-ɔvin pefɔmɛns fɔ validet yuz di ɛksaktɔl fim ɛn kɔmplit pakej.

Wetin Mek Yuz BO PET/PE Lidding-Film Strukchɔ?

• Mɛkanikal trɛnk: BOPET de sɔpɔt ay-spid unwinding, wɛb tɛnsiɔn, kɔt, ɛn sial.

• Optik klia: Di transparent ɔda layt de sɔpɔt di prɔdak visibiliti ɛn glos prɛzɛnteshɔn.

• Printabiliti: Trit BOPET kin sɔpɔt fleksografik ɔ gravur printin afta ink-sistim validɛshɔn.

• Hεt-sil fכnshכnaliti: Di ​​PE-bεys insay layt de mek di sil to wan kompitibl tre sεf.

• Kastom peel bihayvya: Yu kin ajɔst di siling layt fɔ izi fɔ pul, midul pil, ɔ strɔng weld sil.

• Fɔ ɔpgrɛd fɔ wok: Dɛn kin put anti-fɔg, barɛri, printin, pɔrfɔreshɔn, ɛn sɔm ɔt-tritmɛnt kapabiliti dɛn we dɛn dɔn pik.

• Rol kɔnvɔshɔn: Wid, lɔng, kɔr, wayndin dairekshɔn, rol wet, ɛn ɔta dayamita kin mach to tre -siling ikwipmɛnt.

BO PET/PE Top Siling Film Manufacturer Kapabiliti dɛn

• Kastom film tiknes: Nominal 0.06–0.10mm rεnj wit projεkt-spεsifi k tכlerεns rivyu.

• Kastom rol wit: Standart 150mm, 230mm, ɛn 280mm wit plus kɔstɔm slitin.

• Kastom rol konfigyushɔn: Rol lɔng, kɔr insay dayamita, maksimal ɔda dayamita, rol wet, ɛn wayndin dairekshɔn.

• Divεlכpmεnt fכ divεlכpmεnt fכ di sil: I izi-pil, midul-pil, weld-sil, εn aplikεshכn-spεsifi k siling layεr dεm.

• Printin savis: Klia ɔ kɔstɔm-print fim fɔ branding, instrɔkshɔn, kɔdin eria, ɛn traceability.

• Fכnshכnal strכkchכ dεm: Anti-fכg, standad barεri, hεy barεri, MAP , friza-kכmpatibl, εn sεlekt hεt-tritεbl gred dεm.

• Trayal sɔpɔt: Trey-ɛn-film kɔmpatibiliti rivyu, sampul rol, ɛn prodakshɔn-layn tɛst.

• Ɛkspɔt sapɔt: Kastɔm ​​katon, rol lɛbl, palet mak, kɔmɛshɔnal tɛm, ɛn intanashɔnal delivri.

Teknik Spɛsifikeshɔn dɛn

Di tebul we de dɔŋ ya de jɔyn di pej infɔmeshɔn we de naw wit di ɔda spɛsifikɛshɔn dɛn we nɔmal fɔ mek di wan dɛn we de prosɛs di it ɛn di wan dɛn we de chenj di tin dɛn we dɛn de pak, nid. Faynal garanti valyu dɛn fɔ kɔnfyus insay di aprɔv tɛknikal data sheet matirial ɛn bay ɔda.

Aw di BO PET/PE Laminate De Wok

Di Top Silin Film Gred dɛn we de

Tray Matirial Kɔmpatibiliti

Di BOPET ɔda layt nɔ de disayd tre kɔmpitibliti. Di siling layt fɔ mach di tre flɛnch kemistri. Gi di tre spɔlayt, rɛsin, prodak kɔd, drɔin, ɔ fizik sampul bifo kɔmɛshɔnal prodakshɔn.

Easy-Peel vs. Weld-Sil Pɔfɔmɛnshɔn

Peel pefomans kin chenj wit siling temperechur, prɛshɔn, dwɛl tɛm, tre fɔmyulashɔn, rim klin, filin tɛmpracha, friz, stɔrɔj, ɛn rihit. Establish di akseptabl siling winda ɛn peel-fɔs tɛst mɛtɔd di tɛm we dɛn de tray fɔ layn.

Anti-Fɔg, Ay-Baria, ɛn MAP Opshɔn dɛn

Anti-fog tritmɛnt de ɛp fɔ mek kɔndɛns nɔ mek di it we dɛn pak insay frij displei nɔ klia. hכy-baria strכkchכ dεm kin inkכrporεt EVOH כ כda fכnshכnal layεr fכ kכntrכl כksijεn transmishכn εn rεtεn wan modifyed atmosfεr.

Fɔ di barɛri projɛkt, gi di kayn it, di shelf layf we dɛn de ɛkspɛkt, di tɛmpracha we dɛn de kip, di pak gas miksɔp, di ɔksijɛn transmishɔn rit we dɛn nid, di wata-vaypa transmishɔn rit, ɛn ɛni pastɔrayzeshɔn ɔ rihit prɔses.

Tɛmpratura Resistans ɛn Ovenability

Di pej we de naw de tɔk bɔt aw di brayt friza, maykrowev, ɛn ɔvin de wok. Dɛn fɔ tɔk bɔt dɛn kayn tin ya fɔ wan gred we dɛn dɔn gri fɔ fɔ di aplikeshɔn. Wan standad BO PET/PE laminate nɔ fɔ ɔtomɛtik trit lɛk 220°C ovenable film.

Fɔ ɔt-tritmɛnt prɔjek, spɛsifa di maksimal tɛmpracha, di tɛm we i fɔ tek, if di lid stil de na di tre , it lod, venting rikwaymɛnt, friza ɔ kol stɔrɔj, ink ɛn adeziv rikwaymɛnt, ɛn rilevɛns it-kɔntakt rigyuleshɔn. Validate di kɔmplit tre -ɛn-film pakej bifo lanch.

Tray-Sealing Machine ɛn Rol Kɔmpatibiliti

Top siling film fɔ mach di unwind sistem ɛn tul fɔ di tre sial. Gi di mashin brand ɛn mɔdel, wɛb wit, pepa-kɔr dayamita, maksimal rol dayamita, rol wet, waynd dairekshɔn, sil-sayd ɔriɛnteshɔn, ay-mak sɛns, kɔt layout, ɛn ɔpreshɔn spid.

Bifo mas prodakshɔn, tɛst fim trak, tɛnsiɔn, kɔt akkuracy, sil kɔntinyuiti, pil fɔs, lik, bɔrst trɛnk, wrinkling, print rɛjista, anti-fɔg pefɔmɛns, MAP gas ritɛnshɔn, friza pefɔmɛns, ɛn maykrowev ɔ ɔvin pefɔmɛns we i apɔynt.

Kwaliti-Kɔntrol Rikwaymɛnt dɛn

• Tiknes profayl: Afɛkt rol bild, stiffness, sil pefɔmans, ɛn wɛb trak.

• Bond strכng: Konfכm di BOPET εn PE layεr dεm de rεmain sikyuכri laminated.

• Surface tritmεnt: I de kכntro ink εn adhesive adheshon pan di BOPET surface.

• Coefficient of friction: I de inflɔws unwinding, wɛb transpɔt, ɛn mashin spid.

• Ɔt shrinkage: Impɔtant we yu de print, lamin, sial, ɛn ri-ɔt.

• Sil trɛnk ɛn peel fɔs: I fɔ de insay di opareshɔn winda we dɛn gri fɔ.

• Optik kwaliti: I gɛt haz, glos, jel, blak spat, skrat, ɛn kɔntaminɛshɔn.

• Rol kwaliti: Inklud ed alaynɛshɔn, tɛliskɔp, wrinkles, jɔyn, kɔr kɔndishɔn, ɛn wayndin dairekshɔn.

Tipik Aplikeshɔn dɛn

• CPET rɛdi-mɛl trey dɛn

• Di it dɛn we dɛn dɔn pripia we dɛn dɔn frɔz ɛn kol

• Aylayn, relwe, ɔspitul, skul, ɛn institiushɔnal ketɛning

• Pasta, rays, mit, vɛjitebul, ɛn it dɛn we gɛt bɔku bɔku kɔmpawtmɛnt dɛn

• Bekeri prodak, dɛzat, deli it, ɛn snek dɛn we dɛn dɔn pripia

• MAP pak fɔ mit, bɔd, sifud, ɛn it dɛn we dɛn dɔn pripia

• Prayvet-lɛbul prodak dɛn we nid kɔstɔm print lidding film

• Fɔd-savis ɛn kɔntrakt-pak ɔpreshɔn

Eksplore HSQY's CPET tre rɛnj ɛn CPET siling film solushɔn fɔ kɔmpitabl tre -ɛn-film pak sistɛm dɛn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Gi di infɔmeshɔn we de dɔŋ ya so dat HSQY go ebul fɔ pik di kɔrɛkt BO PET/PE strɔkchɔ, rol kɔnfigyushɔn, ɛn siling pefɔmɛns:

1. Trey matirial, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul

2. Trey ɔdasay dimɛnshɔn, flɛnch wit, kɔmpawtmɛnt, ɛn fil wet

3. Tray-siling mashin brand, model, tul layout, ɛn opareshɔn spid

4. Tik, waid, rol lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn waynd dairekshɔn we dɛn nid

5. I izi fɔ pul, midul-pil, ɔ weld-sil rikwaymɛnt

6. Di kayn it we dɛn kin it, di tɛmpracha we dɛn kin ful-ɔp, di tɛmpracha we dɛn kin kip am, ɛn di tɛm we dɛn want fɔ kip di it

7. Friza, maykrowev, kɔvɛnshɔnal ɔvin, MAP , hot-fil, pasteurisation, ɔ retort prɔses

8. Anti-fɔg, ɔksijɛn barɛri, mɔstɔ barɛri, printin, pɔrfɔreshɔn, ɔ venting rikwaymɛnt

9. Fɔd-kɔntakt, maykreshɔn, kwaliti, ɔ dɛstineshɔn-maket dɔkyumɛnt dɛn we dɛn nid

10. Trayal kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn di de we dɛn aks fɔ lanch

Rikwest BO PET/PE Film Sampul ɛn Prayz

Kastɔm ​​Manufakchurin Savis dɛn

• Kastom 0.06–0.10mm film tiknes ɛn tolɛreshɔn

• Kastom 150mm, 230mm, 280mm, ɛn nɔ-standad rol wit

• Kastom rol lɔng, pepa kɔr, rol wet, ɛn ɔda dayamita

• I izi fɔ pul, midul-pil, ɛn weld-sil strɔkchɔ dɛn

• Anti-fɔg, standad-baria, ay-baria, MAP , friza-kɔmpatibl, ɛn ɔt-trit gred dɛn

• Fleksografik ɔ gravu printin fɔ branding ɛn pripia instrɔkshɔn

• Kastom ay mak, print ripit, perforation, ɛn winding dairekshɔn

• Trey-ɛn-film kɔmpatibiliti rivyu, sampul, ɛn prodakshɔn-layn trayal

• Kastom katon, rol lɛbl, palet mak, ɛn intanashɔnal delivri

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumentri we de fɔ di fim gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di tɛknikal data sheet matirial , sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, sefty data, rol inspekshɔn krayteria, ɛn dɛstineshɔn-maket dɔkyumentri we dɛn nid fɔ di ɛksaktɔl strɔkchɔ.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifikeshɔn ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ fud-kɔntakt kɔmplians. Risaykulbiliti fɔ evalyu fɔ di kɔmplit tre -ɛn-film pakej ɛn di kɔlɛkshɔn ɛn risaykul sistɛm dɛn na di dɛstineshɔn makit.

HSQY Intanɛshɔnal Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

Pak ɛn Deliv

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm

Wetin na BO PET/PE top silin film?

Na laminated lidding film wit BOPET ɔda layt fɔ trɛnk, klia, ɛn printabiliti ɛn PE-based insay layt fɔ ɔt sial to wan kɔmpitabl tre sɔfays.

Us tiknes HSQY kin mek?

Dis prodak pej de target nominal tiknes frɔm 0.06mm to 0.10mm. Di fainal gej ɛn tolɛreshɔn fɔ kɔnfyus insay di spɛsifikɛshɔn we dɛn dɔn gri fɔ.

Us rol wit dɛn de?

Standart wit dɛn inklud 150mm, 230mm, ɛn 280mm. Dɛn kin ebul fɔ evalyu di kɔstɔm wit, di rol lɔng, di kɔr, di say we dɛn de waynd, di wet we di rol gɛt, ɛn di dayamita dɛn we de na do.

BO PET/PE kin film sial ɛvri CPET tre ?

Nɔ. CPET tre fɔmyulashɔn ɛn flɛnch sɔfays kin difrɛn. Di film fɔ tɛst wit di aktual tre , silin mashin, it prodak, ɛn tɛmral prɔses.

BO PET/PE kin film sil APET , PET/PE , ɔ PP trey dɛn ?

Difrɛn tre matirial dɛn kin nid difrɛn silin layers. CPET gred nɔ fɔ yuz ɔtomɛtik fɔ APET , PET/PE , PP, aluminiɔm, ɔ pepabɔd we dɛn kɔt we nɔ gɛt kɔmpatibiliti tɛst.

Yu tink se izi-pil BO PET/PE lidding film de?

Yɛs. Dɛn kin mek we dɛn we izi fɔ pul, we gɛt midul, ɛn weld-sil. Di target peel fos ɛn fayl mod fɔ tɛst pan di aktual tre .

Yu tink se anti-fog BO PET/PE fim de?

Yɛs. Dɛn kin gi anti-fɔg tritmɛnt fɔ it we dɛn dɔn kol, mit, prodɔkt, bekɛri, dairy, ɛn ɔda it dɛn we gɛt mɔstɔ.

HSQY kin saplae ay-baria film fɔ MAP ?

Hεy-baria strכkchכ dεm kin evaluate fכ MAP . Gi di target OTR, WVTR, gas miksɔp, di kayn it, tɛmpracha fɔ stɔrɔj, ɛn di shelf layf we dɛn nid.

Yu tink se yu kin yuz standad BO PET/PE film na 220°C?

i nכ fכ tek am se εvri BO PET/PE laminat fit fכ 220°C. Yuz ɔvin nid fɔ gɛt aplikeshɔn-spɛsifi k strɔkchɔ we dɛn validet wit di ɛksaktɔ film, tre , it, tɛmpracha, ɛn di tɛm we dɛn de ɔt.

Yu tink se dɛn kin print di fim we dɛn kin yuz fɔ sidɔm ɔp?

Yɛs. Dɛn kin evalyu flexografik ɔ gravu printin fɔ logo, grafik, prɔdak infɔmeshɔn, instrɔkshɔn fɔ kuk, barɔd, QR kɔd, ɛn traceability.

Wetin mek top siling film de lik?

Lik kin kɔmɔt frɔm di silant kemistri we nɔ kɔmpitabl, tre -rim kɔntaminɛshɔn, inkɔrɛkt tɛmpracha, nɔ inɔf prɛshɔn ɔ tɛm fɔ de, nɔ ivin tul, fim tɛnsiɔn, tre difɔmeshɔn, ɔ nɔ fayn stɔrɔj ​​kɔndishɔn.

Us mashin infɔmeshɔn a fɔ gi?

Gi di tre -sila brand ɛn mɔdel, tul layout, film wit, kɔr ID, maksimal rol dayamita, wayndin dairekshɔn, ɔpreshɔn spid, tɛmpracha, prɛshɔn, ɛn tɛm fɔ de.

Wetin na di minimum ɔda kwantiti?

Di MOQ we dɛn se naw na 500kg. Trial kwantiti dipen pan stok, film strɔkchɔ, wit, printin, ɛn kɔnvɔshɔn rikwaymɛnt.

Aw lɔng di prodakshɔn lida tɛm de?

Tipik lida tɛm na lɛk 10–14 wok de afta dipɔsit ɛn fayn spɛsifikɛshɔn aprɔval. Di gred dɛn we dɛn print, we gɛt ay barɛri, ɔ spɛshal tɛmal gred kin nid mɔ tɛm.

A kin aks fɔ sampul bifo bɔku bɔku prodakshɔn?

Yɛs, i go bi se na di tin dɛn we de ɛn di tin dɛn we dɛn tɔk bɔt. Send di tre sampul, dimɛnshɔn, mashin ditel, di film strɔkchɔ we dɛn nid, stɔrɔj ​​kɔndishɔn, ɛn di ɔt prɔses.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae BO PET/PE top siling film, PET ɛn BOPET film, CPET , PET ɛn PP fud trey dɛn , plastic sheet matirial s, ɛn rilat pak matirial fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt fim-strɔkchɔ sɛlɛkshɔn, rol kɔnvɔshɔn, printin, pil-fɔs divɛlɔpmɛnt, anti-fɔg ɛn barɛri sɛlɛkshɔn, sɛmpul, prodakshɔn-layn trayal, inspekshɔn dɔkyumɛnt, ɛkspɔt pak, ɛn intanashɔnal delivri fɔ it manifakta dɛn, kɔntrakt pak, pak distribyushɔn, aylayn ketɛn, ɛn institiushɔnal it-savis saplay dɛn.

Kontakt HSQY fɔ BO PET/PE Pakɛj Silin Film