Yu de ya: Os » Pakɛj Silin Film dɛn » Sial Film fɔ APET Trey » BO PET/PE TG Silin Film » EasyPeel PET/PE Lamineshɔn Fim

Share to:

EasyPeel PET/PE Lamineshɔn Film

EasyPeel PET/PE Lamination Film na spɛshal kɔmpɔzit matirial we de kɔba di durabiliti fɔ polyethylene terephthalate ( PET ) wit di izi-open funkshɔnaliti fɔ polyethylene (PE). Dɛn mek am fɔ aplikeshɔn dɛn we nid fɔ akses bɔku tɛm we dɛn de kip di prɔdak freshnɛs, dis fim gɛt kɔntrol trɛnk fɔ di pil, we de alaw fɔ opin we nɔ gɛt rɛsɛdyu we nɔ go kɔmprɔmis di intagriti fɔ di sil. I yunik fɔmyulashɔn de mek shɔ se i kɔmpitabl wit ɔl tu di ɔt-silin ɛn kol-pil teknɔlɔji dɛn, we de mek i fayn fɔ pak it, famasi prodak ɛn kɔshɔma guds usay kɔvinant ɛn protɛkshɔn na di impɔtant tin.

Mak:
HSQY we de wok
Tayp fɔ Prodakt:
Fleksibul Pakɛj Fim dɛn
Kɔlɔ:
Klia, Kɔlɔ

Di tin dɛn we yu kin gɛt:



Aks

EasyPeel PET/PE Lamineshɔn Film

Izi-Pil PET/PE Lamineshɔn Film Vidio

Wetin Na Izi-Pil PET/PE Lamineshɔn Fim?

Izi-pil PET/PE lamination film na wan multilayer fleksibul pakej matirial we de kɔba wan PET ɔ BOPET ɔda wɛb wit wan modifyed PE-based peel-seal layt. PET de gi klia, trɛnk, stiffnɛs, dimɛnshɔnal stebiliti, ɛn wan say we dɛn kin print. Di enjinɛri PE layt de gi ɔt silin ɛn kɔntrol opin frɔm wan kɔmpitabl silin sɔfays.

Nɔ lɛk wan standad pɔrmanent-sil PET/PE laminate, dɛn fɔmulayt wan izi-pil gred fɔ mek i kɔntinyu fɔ gɛt di pakej intɛgriti we dɛn de ful-ɔp, stɔrɔj, handel, ɛn transpɔt we dɛn de alaw di kɔshɔma ɔ ɔpreshɔn fɔ opin di paket wit wan difayn pul fɔs.

Di opshɔn dɛn we de inklud tik frɔm 0.045mm to 0.35mm , wit we go rich 2600mm , klia ɔ print fɔmat, opshɔnal EVOH ɔ PVDC barɛri strɔkchɔ, ɛn MOQ we na 500kg . Di prodak famili kin kɔba tin lid wɛb, wayd rɔlstɔk, ɛn strɔkchɔ dɛn we ebi fɔm ɔ we nɔ de fɔm. Faynal spesifikeshɔn dɛn fɔ mach to di pakej fɔmat ɛn siling sabstret.

Izi-Pil PET/PE Lamineshɔn Film Aplikeshɔn dɛn

Izi-pil PET/PE lamineshɔn fim fayn fɔ wan big rɛnj ɔf fleksibul-pak ɛn kɔnvɔyt rikwaymɛnt, inklud wayd-wɛb rolstɔk, kɔstɔm printin, kɔp lid, tre lid, pauch, barɛri laminat, ɛn prɔjek-spɛsifi k fɔm ɔ nɔ fɔm fim strɔkchɔ.

Packaging Format	Tipik Aplikeshɔn	Ki Sɛlɛkshɔn Fakta dɛn
Standart trey lid film	I izi fɔ opin it trey dɛn ɛn standad kɔnvɔyt lid rol.	Trey matirial kompitibiliti, peel fos, anti-fog pefomans, rol wit, siling kondishon, en opin bihayv.
Izi-Pil PET/PE Lamineshɔn Film	Waid-wɛb laminat, kɔstɔm kɔnvɔshɔn, kɔp, trey dɛn , paus, barɛri strɔkchɔ, ɛn print rolstɔk.	Lay strɔkchɔ, tik, waid, printin, peel mɛkanism, barɛri pefɔmɛns, rol fɔmat, ɛn kɔnvɔyt rikwaymɛnt.

Easy-Peel PET/PE Fim Imej dɛn

Klia Fim we Izi-Pil

Kastom print izi-pil PET PE lidding film

Film we dɛn print fɔ mek tin dɛn we dɛn kɔl Lidding

I izi fɔ pul PET PE film we dɛn aplay pan it tre

Izi-Pil Tray Aplikeshɔn

Aw di PET/PE Izi-Pil Strukchɔ de Wok

Layer	Praymari Fɔnkshɔn	Tɛknikal Rikwaymɛnt
PET / BOPET Ɔta Wɛb	I de gi klia, stiffness, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, pankchɔ rɛsistɛns, ɛn printabiliti.	Kɔnfɛm gej, haz, glos, shrinkage, tritmɛnt, print sayd, ɛn tɛmal ɛksplɔshɔn.
Lay we de print	I de kɛr branding, instrɔkshɔn, barɔd, kɔdin, ɛn traceability.	Kɔnfɛm sɔfa ɔ rivas printin, ink sistɛm, kɔlɔ, print ripit, ɛn ay mak.
Laminating Adhesive we yu kin yuz	Bכnd di PET כta wεb to di PE כ hεy-baria insay strכkchכ.	Kɔnfɛm di kemistri, di wet we di kɔtin gɛt, di tɛm we i fɔ mɛn, di trɛnk we di bond gɛt, di ɔda tin we de smɛl, di sɔlvɛnt we lɛf, ɛn di maykreshɔn.
Opshɔnal Barɛri Layer	Ad difayn ɔksijɛn, aroma, mɔstɔ, ɔ layt protɛkshɔn.	EVOH, PVDC , mεtalayzεshכn, fכyl, כ kכt mכst spεsifa wit OTR εn WVTR kכndishכn dεm.
Modified PE Izi-Pil Layer	Krio di ɔt sil ɛn kɔntrol di peel initiation, propagation, ɛn failure mod.	Mach di silin to di aktual tre , kɔp, fim, fɔyl, pepa, ɔ sabstret we dɛn kɔt.

Izi-Pil PET/PE Lamineshɔn Film Spɛsifikeshɔn dɛn

Di spɛsifikɛshɔn dɛn we de kam biɛn ya de sɔma di kɔmɛshɔn opshɔn dɛn we de ɛn di men say dɛn we dɛn kin pik. Faynal film strɔkchɔ, dimɛnshɔn, di peel pefɔmɛns, barɛri prɔpati, ɛn kɔnvɔtin ditil fɔ kɔnfɔm fɔ di pakej ɛn ikwipmɛnt we dɛn want.

Prɔpati	we De Opshɔn	Sɛlɛkshɔn Notis
Tayp fɔ Prodakt	Izi-pil PET/PE fleksibul pak laminat	Liding, kɔp lid, paus, rolstɔk, ɛn projɛkt-spɛsifi k fɔm ɔ nɔ fɔm fim
Tin dɛn	PET ɔ BOPET laminated to modifyed PE piel-sil strɔkchɔ	Kɔnfɛm kɔmplit layt strɔkchɔ ɛn ɛni layt tik
Tik we i tik	0,045–0,35mm	Na lɛk 45–350μm; kɔnfɔm us gej dɛn na tɔp wɛb, paus fim, ɔ fɔm fim
Maksimal Width we pɔsin kin gɛt	I go rich 2600mm	Kɔnfɛm yuzable wit, slit tolɛreshɔn, rol dayamita, ɛn ikwipmɛnt kapasiti
Kɔlɔ	Klin, kɔlɔ, ɔ kɔstɔm print	I go rich 13 kɔlɔ dɛn we dɛn print, we gɛt fɔ du wit at wok, ink sistem, ripit lɔng, ɛn prodakshɔn rivyu
Tayp fɔ Pil	Klin izi peel	Spɛsifik intafays, kɔhiv, delaminɛshɔn, layt, midul, ɔ had pil
Di Opshɔn dɛn fɔ Barɛri	EVOH ɔ PVDC we de bay prɔjek	Kɔnfɛm kɔmplit strɔkchɔ, OTR, WVTR, kɔtin sayd, humiditi, ɛn ɛnd yus
Praymari Aplikeshɔn dɛn	Fɔd pak, kɔp, trey dɛn , paus, kɔshɔma guds, ɛn validet spɛshal aplikeshɔn dɛn	Medikal steril-baria yus nid fɔ gɛt dediket mɛdikal gred ɛn validɛshɔn
Fɔ print	Fleksografik ɔ rotogravure printin bay prɔjek	Kɔnfɛm di artwok, ink, kɔlɔ kɔnt, ripit, ay mak, ɛn maykreshɔn rikwaymɛnt
Tayp fɔ Sil	Hɛt-sil izi fɔ pul	Kol peel na post-sealing opening condition, nɔto substitute fɔ ɔt siling
MOQ we gɛt fɔ du wit am	500kg we yu de yuz	Sampul, tray, print, ɛn spɛshal-grɛd kwantiti dipen pan di matirial we de
Lid Taym	Aprɔksimatli 7–15 dez , dipen pan di fim strɔkchɔ, printin, ɔda kwantiti, ɛn spɛsifikɛshɔn aprɔval	Kɔnfɛm afta strɔkchɔ, artwok, sampul, ɛn spɛsifikɛshɔn aprɔval

Izi Pil Na di Failure Mechanism De Difayn am

Peel Mechanism	Aw I De Opin	Tipik Rizult
Intafɛshɔnal Pil	Di sialant de separet frɔm di sial sabstret na di intafɛs.	I kin gi klin rim wit smɔl ɔ nɔ gɛt ɛni rɛsɛdyu we pɔsin kin si we dɛn mach am fayn.
Pil we gɛt wanwɔd	di peel layεr de split insay we i de opin.	I de gi kɔntrol peel fɔs ɛn i kin lɛf wan dizayn sial patɛn.
Delamination ɔ Bɔst Pil	Wan tin sil layt de separet frɔm wan strɔkchɔral layt we de nia am.	Kin gi klia film ɛn opshɔnal barɛri funkshɔnaliti, bɔt layt dizayn ɛn bond kɔntrol impɔtant.
Film Tear we de na di fim	Di lidding ɔ laminate de tear instead fɔ peel.	Bɔku tɛm i nɔ kin fayn fɔ klin-pil paket ɛn i kin sho se di sil trɛnk pasmak ɔ i nɔ kin kɔmpit fayn.

Pil Initieshɔn, Propageshɔn, ɛn Wan-Pis Opin

Peel Parameter	Wetin I Mezhɔ	Wetin Mek I Impɔtant
Di Initiashɔn fɔ Pil	Fos we yu nid fɔ bigin fɔ opin na di tab ɔ kɔna.	Kontrol fɔs-opin aksessibiliti ɛn pakej sikyɔriti.
Pil Prɔpageshɔn	Fɔs we dɛn nid fɔ kɔntinyu fɔ opin akɔdin to di sil.	Wan stebul fos de gi smol, prɛdiktibɛl opin.
Wan-Pis Pil we dɛn kɔl	Abiliti fɔ pul di lid we nɔ gɛt film shard, pul ripit, ɔ te we yu nɔ kɔntrol.	Impɔtant fɔ kɔshɔma kɔvinant ɛn klin separeshɔn.
Rɛsidyu ɔ Stringing	Visible sialant we de lɛf pan di sabstret ɔ we de strɛch we dɛn de opin.	Akseptans dipen pan di spɛsifikɛd peel mɛkanism ɛn hajɛns rikwaymɛnt.
Peel Afta yu dɔn kip am	Opin pefɔmɛns afta dɛn dɔn kol, frɔz, ambient, ɔ aksɛleret ol.	Di fɔs we di pil kin chenj wit di tɛm, di tɛmpracha, di humidity, ɛn di prɔdak kɔntakt.

Sabstret Kɔmpatibiliti

Sial Sabstret	Kɔmpatibiliti Gaydɛns	Rikɔmɛnd Aprɔch
PET/PE ɔ PE-Kɔt Trey	Suitabl wen di tre flɛnch prɛzɛnt wan kɔmpitabl PE silin sɔfays.	Konfam PE gred, flange width, peel tab, kontamineshɔn, ɛn target peel fɔs.
PE Kɔp ɔ Fim	I kin fayn fɔ kɔp lid ɔ film-to-film pak wit di kɔrɛkt PE pil fɔmyulashɔn.	Test sil initieshɔn, hot tak, peel fɔs, lik, ɛn prodak kɔntakt.
Plɛn APET / r PET / CPET	Wan plein PET sɔfays kin nɔ sial kɔrɛkt wan to wan standad PE izi-pil layt.	Yuz PET -kɔmpatibl silin, kɔt sɔfa, ɔ kwalifay yunivasal gred.
PP Kɔp ɔ Trey	PP jεnarali nid fכ PP-kכmpatibl pil layεr.	Yuz PP-based izi-pil strɔkchɔ ɔ wan verified yunivasal silan.
PS / HIPS / PVC	Rikways sabstrat-spɛsifi k peel kemistri.	Test di aktual kɔp, tre , blista, ɔ sheet matirial bifo spɛsifikɛshɔn aprɔval.
Aluminium Foil ɔ Pepa we Dɛn Kɔt	I nid fɔ gɛt kɔmpitabl ɔt-sil kɔtin ɔ pil layt.	Spɛsifik di lak, kɔtin, pepa fayba-ti limit, ɛn di we aw yu want fɔ mek i nɔ wok.
Tyvek ɔ Mɛdikal Pepa	Mɛdikal stɛriyl pak nid fɔ kɔntrol di pil, maykrobial barɛri, sterilayz kɔmpatibiliti, ɛn validet siling.	Yuz ɔl wan dediket mɛdikal-grɛd strɔkchɔ wit di rikwayd rigyuletɔri ɛn prɔses validɛshɔn.

Standart PET/PE vs. EVOH ɛn PVDC Barɛri Gred dɛn

Strukchɔ	Tipik Fɔnkshɔn	Tɛknikal Limiteshɔn
Standart PET/PE I izi fɔ Pil	Klari, trɛnk, printabiliti, mɔstɔ protɛkshɔn, ɛn PE-kɔmpatibl peel siling.	Standard PET/PE de gi yusful pak pefɔmans bɔt i nid fɔ ad barɛri layt we dɛn spɛsifa lɔw OTR.
PET/EVOH/PE I izi fɔ Pil	ad transparent oksijεn εn aroma barεri fכ MAP εn כksidεshכn-sεnsitiv prodakt dεm.	OTR dipen pan EVOH gred, tik, humidity, ɛn kɔmplit strɔkchɔ.
PVDC -Kɔt ɔ PVDC -Kɔntinɛnt Strukchɔ	I kin ad ɔksijɛn, mɔstɔ, ɛn aroma barɛri dipen pan di kɔtin ɔ layt dizayn.	Dɛn fɔ chɛk di sayd we dɛn de kɔt, di wet we di kot gɛt, di tin dɛn we dɛn nid fɔ du, di tin dɛn we dɛn fɔ du fɔ risaykul, ɛn di tin dɛn we dɛn nɔ fɔ du na di say we dɛn de go-maket.
Laminat we dɛn mek wit mɛtal ɔ Foyl	Ad ay layt, ɔksijɛn, mɔstɔ, ɛn aroma protɛkshɔn.	Ridyus transparency ɛn chenj risaykul, ditekshɔn, ɛn fleks-krak kɔnsidareshɔn.

OTR ɛn WVTR fɔ Spɛsifiket Separet wan

Barrier Prɔpati	Purpose	Rikwayd Test Infɔmeshɔn
OTR we dɛn kɔl OTR	i de mכsu כksijεn transmishכn εn i imכtant fכ כksidεshכn-sεnsitiv it dεm εn MAP .	cc/m²/de, tεmprachכ, rilitiv humiditi, tεst mεtכd, εn komplit film strכkchכ.
WVTR	I de mɛzhɔ wata-vapour transmishɔn ɛn afɛkt di dray, tɛkstɔr, mɔstɔ we de gɛt, ɛn di prɔdak stebiliti.	g/m²/de, tεmprachכ, rilitiv humiditi, tεst mεtכd, εn komplit film strכkchכ.
Ɔl-Pak Gas Ritɛnshɔn	Measure aktual pakej lik ɛn gas stebiliti.	Trey ɔ paus, sil, edspɛs, gas miksɔp, ɔksijɛn we lɛf, ɛn di kɔndishɔn fɔ kip.

Sil Windo ɛn Mashin Validɛshɔn

Wan prɛktikal fim we izi fɔ pul nid fɔ gɛt inof wayd sil winda. Di film fɔ gi akseptabl pakej intɛgriti ɛn peel fɔs akɔs nɔmal fluktueshɔn dɛn na siling tɛmpracha, prɛshɔn, dwɛl tɛm, layn spid, sabstret tɛmpracha, prodak kɔntaminɛshɔn, ɛn tul kɔndishɔn.

Minimum sil-initiashɔn tɛmpracha
Ɔpa tɛmpracha bifo pasmak peel fɔs, distɔrshɔn, ɔ film damej
Prɛshɔn we dɛn nid fɔ sial ɛn di tɛm we dɛn fɔ de
Hot-tak trɛnk wantɛm wantɛm afta dɛn dɔn sial am
Faynal peel fos afta kol en kondishon
Pɔfɔmɛnshɔn pan klin ɛn kɔntaminɛt silin sɔfays
Kɔnsistɛns akɔdin to ɛvri kaviti, kɔna, ɛn sil wit
Wɛb trak, kɔt, ay-mak rɛjista, ɛn winding bihayvya

Kontaminɛshɔn Tolɛreshɔn ɛn Sil Intɛgriti

Prɔblɛm	Posisibul Kɔz	Rikɔmɛnd Chɛk
Seal Na Tu Wik	Lɔw tɛmpracha, shɔt tɛm fɔ de, lɔw prɛshɔn, kɔntaminɛshɔn, ɔ sabstret we nɔ kɔmpitabl.	Krio wan temperechur-prɛshɔn-dwɛl matris yuz di aktual pakej.
Sil Na Tu Strɔng	Tɛmral input pasmak ɔ wan layt we nɔ fayn fɔ pul.	Ridyus di siling ɛnaji ɛn pik di kɔrɛkt peel fɔmyulashɔn.
Film Tia ɔ Shred	Ay peel fos, film stiffness we nɔ fayn, wik lamination, ɔ po peel-tab dizayn.	Rivyu totכl tiknes, bond strכng, peel mεkanism, εn pakej jכmetri.
Risidyu we pasmak	Cohesive failure ausayd di target rεnj כ pasmak hεt.	Difayn di fayl mod we yu want ɛn tɛst afta yu dɔn kip am.
Chanɛl Lik	Wrinkles, it patikyula, ɔyl, mɔstɔ, paoda, rim we dɔn pwɛl, ɔ tul we nɔ ivin.	Yuz vaykum, prɛshɔn-dɛkay, day, ɔ bɔbul tɛst.
Delaminɛshɔn	Nɔ inɔf adhesive cure, wik bond, pasmak ɔt, ɔ layers we nɔ kɔmpitabl.	Test bond strength bifo ɛn afta sial, ol, ɛn distribyushɔn simulshɔn.

Fɔ Aplikeshɔn fɔ Pak Fɔd

Dairy kɔp, yogɔt, dɛzat, jeli, chiz, ɛn dip
Chilled ɛn frozen rɛdi it dɛn
Fresh prodɔkt, salad, bekeri, ɛn it dɛn we dɛn dɔn pripia
Mit, bɔd, sifud, ɛn MAP pak dɛn we de yuz kwalifay barɛri gred
Kɔp dɛn we dɛn kin gi wan tɛm nɔmɔ, pɔshɔn pak dɛn, ɛn lid dɛn we dɛn kin pul
PET/PE ɛn PE-kɔt trey dɛn wit kɔmpitabl silin sɔfays
Print liding film ɛn wayd-wɛb kɔnvɔyt rolstɔk
Paus ɛn fim-to-film paket dɛn we nid fɔ kɔntrol fɔ opin

Yuz fɔ Mɛdikal ɛn Famasi, I Nid fɔ gɛt Sɛparet Gret

Medikal-divays ɛn famasitik pak nid fɔ gɛt wan dediket, validet fim gred. Standart fud-pakεj PET/PE izi-pil laminat nכ min fכ prεzεnt as stεril-baria mεdikal film pas di spεsifi k strכkchכ εn pak sistεm dεn bin validet fכ dat yus.

Medikal-divays pak kin nid fɔ kɔntrol ɛn ripit di pil fɔs, lɔw patikyula jɛnɛreshɔn, maykrobial-baria pefɔmɛns, kɔmpitibliti wit di sɛlɛkɛt stɛrilayzeshɔn we, sil-prɔses validɛshɔn, pak-intɛgriti tɛst, ol, distribyushɔn tɛst, ɛn fɔ fala di aplikebul mɛdikal-pakɛj spɛsifikɛshɔn.

Eksakt mɛdikal divays ɛn shap-ɛj risk
Sterilization method: EO, redyushɔn, stim, ɔ ɔda validet prɔses
Tyvek, mɛdikal pepa, fim, ɔ ɔda lid sabstret
Rikwayd peel-fɔs rɛnj ɛn patikyula ɔ fayv-ti limit
Maykrobial-baria ɛn pak-intɛgriti rikwaymɛnt dɛn
Sial ikwipmɛnt, tɛmpracha, prɛshɔn, tɛm fɔ de, ɛn di prɔses validɛshɔn
Akselɛret ɛn rial-taym ol
Distribushɔn, vaybreshɔn, drɔp, ɛn pankchɔ tɛst
Aplikabl ISO 11607 ɛn dɛstineshɔn-maket rikwaymɛnt dɛn

Print ɛn Rol-Kɔnvɔshɔn Rikwaymɛnt dɛn

Di we aw dɛn kin print: Grev, fleksografik, ɔ ɔda we we dɛn dɔn validet.
Ink sistem: Solvent-based, wata-based, UV, ɔ low-migration sistem.
Printin sayd: Sɔfayz ɔ rivas print na di PET ɔda wɛb.
Kɔlɔ kɔnt: Dɛn kin ebul fɔ chɛk 13 kɔlɔ dɛn akɔdin to di art wok, di we aw dɛn de print, di lɔng we dɛn ripit, di ink sistem, ɛn di tin dɛn we dɛn nid fɔ mek.
Print ripit: Mach di kɔp, tre , paus, ɔ kɔt layout.
Ay mak: Difayn saiz, kɔlɔ, ed pozishɔn, ɛn di tin dɛn we di sɛns nid.
Rol width: Kɔnfɔm yusable wɛb width, slit tolɛreshɔn, ɛn edj kwaliti.
Kor ɛn rol: Spɛsifik kor ID, ɔta dayamita, rol wet, lɔng, ɛn unwind dairekshɔn.
Tritmɛnt sayd: Fɔ no di say dɛn we dɛn dɔn trit wit korona, we dɛn kɔt wit prayma, ɔ we de fes di silan.
Splais kɔntrol: Difayn maksimal splais kɔnt ɛn splais aydentifikeshɔn.

Kwaliti-Kɔntrol Rikwaymɛnt dɛn

Tכtal tiknes εn layt rεshכ: Kכnfכm PET , adhesive, PE, εn opshכnal barεri layεr dεm.
Pil fכs: Difayn sabstεrayt, spεshal wit, pil angle, spid, kondishכn, εn akseptabl rεnj.
Failure mod: Spɛsifik intafays, kɔhisiv, delamination, ɔ ɔda aprɔv peel.
Sil initieshɔn ɛn hot tak: Match di prodakshɔn ikwipmɛnt ɛn di paket lod.
Lamination bond: Verifay afta ful cure, storage, ɛn thermal exposure.
OTR ɛn WVTR: Stet kɔndishɔn dɛn we dɛn de klem barɛri pefɔmɛns.
Optik kwaliti: Kɔntrol di haz, glos, jel, skrat, ɛn di we aw dɛn print am.
Mɛkanikal pefɔmɛns: Kɔnfɔm tɛnsiɛl, ɛlɔngeshɔn, pankchɔ, tear, ɛn fleks rɛsistɛns.
COF ɛn blok: Kɔntrol ay-spid unwinding ɛn mashin transpɔt.
Rol kwaliti: Inspek di ed alaynɛshɔn, wrinkles, tɛliskɔp, kɔr kɔndishɔn, ɛn wayndin dairekshɔn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Pakɛj fɔmat: tre lid, kɔp lid, paus, fim-to-fim pak, fɔm fim, ɔ nɔ fɔm wɛb
Sabstret matirial, spɔlayt, gred, kɔtin, drɔ, ɔ fizik sampul
Rikwayd totכl tiknes, layt rεshכn, wit, rol lεngth, kכr, כta dayamita, εn rol wet
Target peel fכs εn prεfrεd intafεys, kכhεsiv, כ delaminεshכn fεil mכd
Di kayn prɔdak, di tɛmpracha fɔ ful-ɔp, ɔyl, mɔstɔ, paoda, sos, ɛn di risk dɛn we kin mek i gɛt dɔti
Di kɔndishɔn fɔ stɔrɔj, distribyushɔn, di shelf layf we dɛn want, ɛn di tɛmpracha we dɛn de opin
Rikwayd OTR, WVTR, EVOH, PVDC , mɛtalayzeshɔn, fɔyl, ɔ ɔda barɛri
Di we aw dɛn de print, di kɔlɔ dɛn, di art wok dɛn, di ripit, ay mak, transparent winda, ɛn kɔdin
Mashin brand, mɔdel, layn spid, tɛmpracha, prɛshɔn, tɛm fɔ de, ɛn we fɔ kɔt
Fɔd-kɔntakt, famasi, mɛrɛsin, industri, ɔ ples-maket rikwaymɛnt dɛn
Sterilization ɛn ISO 11607 rikwaymɛnt dɛn if dɛn prɔpos fɔ yuz mɛdikal aplikeshɔn
Sampul kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn lanch schedule

Rikwest Easy-Peel Film Samples ɛn Prayz

Kastamayzeshɔn Savis dɛn

Kastom 0.045–0.35mm totכl tiknes εn layt rεshכ
Kastom widths op to 2600mm, subjekt to gred ɛn prodakshɔn kapabiliti
Kastom rol lɔng, kɔr ID, ɔta dayamita, rol wet, ɛn wayndin dairekshɔn
Intafeshal, kohεsiv, delaminεshכn, layt, mεdiכm, εn had-pil strכkchכ dεm
PET/PE , PET/EVOH/PE , PVDC -we gɛt, mɛtal, fɔyl, ɛn projɛkt-spɛsifi k barɛri laminat
Klia, kɔlɔ, print, anti-fɔg, mat, anti-statik, ɛn spɛshal gred dɛn
Grev ɔ fleksografik printin, ay mak, transparent winda, ɛn kɔdin eria
Fɔd trey dɛn , kɔp, pauch, film-to-film, industrial, ɛn sɛpret validet mɛdikal strɔkchɔ
Pil-fɔs, sil-windo, bond, lik, barɛri, ol, ɛn prodakshɔn-layn trayal
Kastom lɛbl, katon, palet mak, ɛn ɛkspɔt pak

Pakɛj ɛn Delivri

Packaging Item	Standart Arenjmɛnt	Kastamayzeshɔn
Sampul we dɛn de pak	Smɔl rol ɔ kɔt sɛmpul dɛn we dɛn protɛkt insay PE bag ɛn katon.	Lebul wit strɔkchɔ, tik, waid, peel gred, ɛn lɔt.
Rol Pakɛj we dɛn kin yuz fɔ mek tin dɛn	Rol dɛn we de protɛkt frɔm dɔst, mɔs, ed damej, ɛn tɛliskɔp.	Katon, suspension pak, kor plɔg, ɛn protɛktiv rap.
Palet we dɛn kin pak	Ekspɔt plai wud palet dɛn we dɛn pik akɔdin to di rol dimɛnshɔn.	arawnd 500–2000kg pan wan palet usay i fayn.
Kɔntinɛnt we dɛn de lod	Lod optimized fɔ 20ft ɔ 40ft kɔntena dɛn.	Lod plan bays pan rol dayamita, palet, ɛn ples fɔ go.
Di Tɛm dɛn fɔ Delivri	FOB, CIF, EXW, ɔ ɔda tin dɛn we dɛn gri pan.	Kɔnfɛm di say we yu de go, Inkɔtɛm, inshɔrans, ɛn kɔstɔm dɔkyumɛnt dɛn.
Lid Taym	Aprɔksimatli 7–15 dez , dipen pan di fim strɔkchɔ, printin, ɔda kwantiti, ɛn spɛsifikɛshɔn aprɔval.	Fɔ print kɔstɔm, barɛri strɔkchɔ, fɔ mɛn, ɛn fɔ validet kin nid mɔ tɛm.

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi di tɛknikal, kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumentri we de fɔ di fim gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di kɔmplit strɔkchɔ, tɛnki data sheet matirial , sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn usay i rili impɔtant, maykreshɔn ripɔt, peel-fɔs we, barɛri ripɔt, rɛsɛdyual-sɔlvɛnt kɔntrol, ɛn rol inspekshɔn krayteria.

ISO 9001 gɛt fɔ du wit di kwaliti-mɛnejmɛnt sistɛm. Di prɔdak-spɛsifi k it-kɔntakt, barɛri, mɛdikal, risaykul, ɔ paket-intɛgriti rikwaymɛnt dɛn fɔ sɔpɔt bay dɔkyumɛnt dɛn we de aplay to di ɛksaktɔl fim gred ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz. Di wan dɛn we de bay kin aks fɔ rilevɛns tɛst ripɔt, diklareshɔn, ɛn kwaliti dɔkyumɛnt fɔ di strɔkchɔ we dɛn dɔn gri fɔ.

Kwaliti ɛn kɔmplians dɔkyumentri fɔ izi-pil PET PE lamination film

Tin dɛn fɔ Tink bɔt fɔ Risaykul

PET/PE na wan multi-polymer laminate, ɛn in risaykulbiliti dipen pan di PET -to-PE ratio, adeziv, barɛri layers, PVDC , ink, kɔtin, lid, trey dɛn , lɛbl, prodak rɛsɛdyu, paket saiz, lokal kɔlɛkshɔn lɔ, ɛn risaykul infrastukchɔ we de.

We dizayn fɔ risaykul na prɔyoritɛt, kɔmpia di kɔrɛnt PET/PE strɔkchɔ wit wan MDO-PE/PE, BOPE/PE, PP-dominant, PET -dominant, ɔ ɔda risaykul-oriɛnted izi-pil sistɛm. Ɛni ɔda we fɔ stil mit di tin dɛn we dɛn nid fɔ mek di pil, barɛri, stiffness, printin, sil, shelf-layf, ɛn mashin rikwaymɛnt dɛn.

Globɛl Ɛgzibishin dɛn

2017 Shanghai Ɛgzibishin

2018 Shanghai Ɛgzibishin

2023 Saudi Ɛgzibishin

2023 Amɛrikan Ɛgzibishin

2024 Ɔstrelia Ɛgzibishin

2024 Amɛrikan Ɛgzibishin

2024 Mɛksiko Ɛgzibishin

2024 Paris Ɛgzibishin

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt Easy-Peel PET/PE Film

Wetin na Izi-Pil PET/PE lamineshɔn fim?

Na fleksibul laminat we de kɔba wan PET ɔ BOPET ɔta wɛb wit wan modifyed PE pil-sil layt fɔ kɔntrol ɔt silin ɛn opin.

Aw i difrɛn frɔm standad PET/PE lamination film?

Standard PET/PE nכmal wan de tכk bכt pεrmanεnt hεt silin. Easy-peel PET/PE de yuz wan spεshal fכmulayt sil layt fכ gi wan kכntroled pil fכs.

Wetin na di difrɛns bitwin intafays ɛn kɔhisiv peel?

Intafeshal peel de separet na di sabstret intafeys. di kohεsiv peel split insay di peel layεr εn i kin lεf wan disayn sialant patεn.

Yu tink se dɛn kin mek di peel fɔs we yu want?

Yɛs. Layt, midul, ɔ had pil kin divɛlɔp insay prɛktikal limit yuz di aktual sabstret, sil kɔndishɔn, ɛn gri fɔ tɛst we.

Di fim kin gi wan-pies peel?

Wan-pies peel kin bi target tru film strɔkchɔ, sabstret maching, peel-tab dizayn, ɛn siling kɔndishɔn, bɔt i fɔ validet pan di fayn paket.

Us sabstret dɛn kin PET/PE izi-pil film sial?

I de fכs fכ kompitibl PE כ PE-kכt sεf dεm. Plɛn PET , PP, PS , PVC , fɔyl, pepa, ɛn Tyvek kin nid difrɛn peel kemistri.

Na standad PET/PE film ay barɛri?

Standart PET/PE film nɔto fɔ se na ay-ɔksijɛn-baria strɔkchɔ. di ay-baria gred dεm tipikli yuz EVOH, PVDC , mεtalayzεshכn, fכyl, כ כda difayn barεri layεr εn dεn fכ spεsifa wit mεzjכd OTR εn WVTR kכndishכn dεm.

Wetin na di difrɛns bitwin EVOH ɛn PVDC barɛri opshɔn?

Dɛn tu kin mek di barɛri wok fayn, bɔt dɛn ɔksijɛn, mɔstɔ, kɔtin, rigyuletɔri, risaykul, ɛn humidity kwaliti dɛn difrɛn. Spɛsifik di kɔmplit strɔkchɔ ɛn tɛst data.

Yu tink se dɛn kin print di fim bay dɛnsɛf?

Yɛs. Grev ɔ fleksografik printin kin inklud branding, instrɔkshɔn, barɔd, QR kɔd, ay mak, ɛn transparent winda.

Yu tink se dɛn kin yuz am fɔ pak tin dɛn we dɛn kin yuz fɔ mɛn pipul dɛn?

Na wan sɛpret validet mɛdikal-grɛd strɔkchɔ nɔmɔ dɛn fɔ yuz. stεril pak nid fכ pil, maykrobial-baria, stεrilayzεshכn, ol, pak-integriti, εn prכsεs validεshכn.

Yu tink se dɛn kin sial am to Tyvek?

Tyvek aplikeshɔn dɛn nid fɔ gɛt wan dediket mɛdikal pil strɔkchɔ ɛn wan validet steril-baria pak sistɛm. Wan standad fud-pakej PET/PE izi-pil film nɔto dairekt sɔbstityuyt.

Us tik ɛn waid dɛn de?

di opshכn dεm we de inklud 0.045–0.35mm tiknes εn widths te to 2600mm. Di aplikebul rεnj dipכnt pan di film strכkchכ we dεn nid, di pakej fכmat, εn di kכnvכt prכsεs.

Wetin kin mek di fim te ɔ di tin dɛn we lɛf?

Di tin dɛn we kin mek i apin na we di tɛmpracha we di silin kin pasmak, di kemistri we nɔ kɔrɛkt fɔ di pil, di fim we nɔ fayn fɔ stiff, wik lamination, di sabstret nɔ mach, ɔ di we aw dɛn nɔ mek di peel-tab fayn.

PET/PE izi-pil film risaykul?

I nɔ fɔ ɔtomɛtik diskrayb se i kin risaykul ɔlsay bikɔs i kin jɔyn difrɛn polima famili dɛn ɛn i kin gɛt adeziv, ink, ɛn barɛri layers.

A kin aks fɔ sampul ɛn mashin trial?

Yes, i go bi se na di spesifikeshɔn ɛn di matirial we de. Gi di sabstret, pakej fɔmat, mashin, peel target, dimɛnshɔn, barɛri, printin, ɛn kɔmplians rikwaymɛnt.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae izi-pil PET/PE lamineshɔn film, standad PET/PE laminat, PET/EVOH/PE barɛri film, tre lidding film, print fleksibul-pak rolstɔk, PET ɛn PP trey dɛn , plastic sheet matirial s, ɛn rilat pak matirial fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt laminate-strakchɔ sɛlɛkshɔn, peel-fɔs divɛlɔpmɛnt, sabstret kɔmpatibiliti, printin, barɛri rikwaymɛnt, rol kɔnvɔshɔn, sɛmpul, prodakshɔn-layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri.

Kontakt HSQY fɔ Izi-Pil PET/PE Film

Bifo:

Nɛks: