HSQY Customized Tik Fud tre /Bɔks Pakɛj Film Silin

Wetin Na Kastɔm ​​Tiknɛs Fɔd Film we de sial di trey ?

Kastom tiknes it tre siling film na fleksibul lidding rolstɔk we dɛn mek ɔ kɔnvɔyt to wan sɛlɛkɛt gej, wit, rol lɔng, kɔr, ɛn fɛnshɔnal strɔkchɔ fɔ sial kɔmpatib it trey dɛn ɛn bɔks dɛn. dis pej de kכba nominal tiknes frכm 0.05mm to 0.10mm, we ikwal to 50–100 maykron.

HSQY de saplae PET - ɔ BOPET -based laminated film wit aplikeshɔn-spɛsifi k siling layers fɔ CPET trey dɛn ɛn ɔda kɔmpatibl tre sɔfays. Di opshɔn dɛn we de inklud klia fim, kɔstɔm printin, izi fɔ pul, midul pil, wɛld sil, anti-fɔg, ay barɛri, MAP , friza-kɔmpatibl, maykrowev-kɔmpatibl, ɛn aplikeshɔn-spɛsifi k ɔvinable strɔkchɔ.

If di fim tik mɔ, i kin mek i stiff, i nɔ kin panch, i kin mek di wɛb stebul, ɛn i kin mek i ebul fɔ ol am, bɔt i kin mek bak di tin we dɛn de yuz fɔ mek di fim, i kin chenj di we aw dɛn kin sidɔm, we dɛn kin kɔt, we dɛn kin pul, wet fɔ rol, ɛn aw di mashin kin wok. So dɛn fɔ pik di kɔrɛkt gej tru tɛst pas fɔ pik di fim we tik pas ɔl bay difɔlt.

Wetin Mek Yu Fɔ Kastɔm ​​di Liding-Film Tiknɛs?

• Mashin stebiliti: Di ​​kɔrɛkt gej kin mek wɛb trakin, tɛnsiɔn kɔntrol, kɔt, ɛn sial pan kɔmɛshɔnal tre sila dɛn bɛtɛ.

• Pankchɔ rɛsistɛns: Wan gej we ebi kin fayn fɔ prɔdak dɛn we gɛt shap ed, bon, komponent dɛn we dɔn frɔz, ɔ dimand fɔ sheb.

• Pakɛj stiffness: Tik film kin gi mɔ substantial fil ɛn ridyus pasmak flutter ɔ kɔl.

• Pil pefɔmɛns: Gej de inflɔws aw di fim de bɛn, te, ɛn pul frɔm di tre rim.

• Tɛmral bihayvya: Tik we i tik kin afɛkt di ɔt transfɔm, shrink, sial rispɔns, ɛn rihit pefɔmɛns.

• Barɛri dizayn: Di tɔtal gej kin chenj we dɛn ad EVOH, PA, kɔtin, ɔ ɔda layers we de wok.

• Material optimization: Yuz di lowest gej we kɔnsistɛntli mit protɛkshɔn ɛn layn-perfɔmans rikwaymɛnt kin ridyus matirial kɔnsɔmshɔn ɛn rol chenj.

50–100 Maykron Tiknɛs Sɛlɛkshɔn Gɛd

Di gayd we de kam biɛn ya de ɛksplen di tipik injinɛri trade-ɔf dɛn. I nɔto tin we ɔlman kin tɔk bɔt. Faynal suitabiliti fɔ kɔnfyus pan di aktual tre , siling ikwipmɛnt, ɛn pak prodak.

Kastom Tiknɛs Silin Film Spɛsifikeshɔn dɛn

Di spesifikeshɔn dɛn we de dɔŋ ya de sɔma di standad valyu dɛn ɛn di prɔjek-spɛsifi k opshɔn dɛn. Faynal garanti valyu dɛn fɔ kɔnfyus insay di tɛknikal data sheet matirial , aprɔv sampul, ɛn bay ɔda.

Fɔd Film we de sial di trey Data Shit dɛn

Di tɛknikal dɔkyumɛnt dɛn we de dɔŋ fɔ kɔrɛkt to di ɛksaktɔl silin-film strɔkchɔ, tik, tɛst we dɛn de du, ɛn di prodak gred we dɛn de evalyu.

Aw di Multilayer Film Structure de Wok

Tray Matirial Kɔmpatibiliti

Film tik nɔ de disayd us tre rɛsin i go sial. Kɔmpatibiliti de kɔntrol mɔ bay di silin layt, tre flɛnch, ɛn prɔses kɔndishɔn dɛn. Test di ekzak tre bifo komershal oda.

Izi-Pil, Midul-Pil, ɛn Wɛld-Sil Opshɔn dɛn

Di sil ɛn di peel pefɔmɛns kin chenj we di film gej chenj. Ɛni tik we dɛn prɔpɔz fɔ tɛst fɔ sil initieshɔn, ɔpreshɔn winda, pik pik fɔs, klin-pil bihayvya, lik, ɛn tre -rim damej.

Anti-Fɔg, Ay-Baria, ɛn MAP Strukchɔ dɛn

Anti-fog tritmɛnt de ɛp fɔ ridyus kɔndenseshɔn ɛn fɔ mek yu si am fayn fayn wan na frij displei. di ay-baria gred dεm kin inkכrporεt EVOH כ כda fכnshכnal layεr fכ kכntrכl כksijεn εn mεnten wan modifyed atmosfεr.

Fɔ barɛri projɛkt, gi di OTR, WVTR, gas miksɔp we dɛn nid, di kayn it, di tɛmpracha we dɛn de ful-ɔp, di tɛmpracha we dɛn de kip, ɛn di shelf layf we dɛn want. Di barɛri pefɔmɛns fɔ mɛzhɔ pan di aprɔv kɔmplit laminat, nɔto infɛr frɔm tiknes nɔmɔ.

Friza, Maykrowev, ɛn Ɔvin Aplikeshɔn dɛn

Friza, maykrowev, ɛn ɔvin fit fɔ dipen pan di ɛksaktɔl film strɔkchɔ ɛn validet aplikeshɔn kɔndishɔn. Di thermal suitability of a CPET tre nɔ de ɔtomɛtik aplay to di lid film, ink, adeziv, kɔtin, ɔ sil.

Fɔ thermal aplikeshɔn, gi di lɔs stɔrɔj ​​tɛmpracha, maksimam ɔt tɛmpracha, di tɛm we i fɔ tek, it lod, venting rikwaymɛnt, if di lid stil de pan we yu de kuk, ɛn di rilevɛns it-kɔntakt lɔ dɛn. Kɔndɔkt kɔmplit-pak tɛst bifo yu lanch.

Efεkt כf Tiknes pan Tray-Sealer Pεrformεns

• Rol wet: Tik film de inkrisayz rol wet fɔ di sem wit ɛn lɔng.

• Mita fɔ wan rol: Wan tik gej kin ridyus di lɔng we de insay di mashin in maksimal rol dayamita.

• Hɛt transfa: Gej kin chenj di siling rispɔns ɛn di tɛmpracha, prɛshɔn, ɔ di tɛm we dɛn nid fɔ de.

• Fɔ kɔt: Di fim we ebi kin nid fɔ gɛt difrɛn naif kɔndishɔn, fɔ kɔt prɛshɔn, ɔ fɔ mek di tul dɛn fayn.

• Wɛb tɛnsiɔn: Di tɛnsiɔn sɛtin dɛn kin nid fɔ ajɔst fɔ mek yu nɔ rɔtin, strɛch, ɔ nɔ trak fayn.

• Pil bihayvya: Fim we tik kin fil stif ɛn i kin chenj di angul ɔ fɔs we dɛn nid fɔ opin di paket.

• Layn spid: Verifay stebul opareshon na di plan komershal spid, no onli durin slo sampul trial.

Gej Optimayzeshɔn ɛn Sastaynabiliti

Fim we tik pasmak nɔ kin bi bɛtɛ fim ɔtomɛtik wan. Gej ɔptimayzeshɔn aim fɔ yuz di tik we smɔl pas ɔl we kɔnsistɛntli mit pankchɔ, barɛri, silin, pil, distribyushɔn, ɛn mashin-pɔfɔmɛnshɔn rikwaymɛnt dɛn. Dis kin mek di matirial wet, chenj di rol, transpɔt wet, ɛn di kɔst fɔ pak di tin dɛn nɔ bɔku.

Ɛni risaykul klem fɔ asɛs fɔ di kɔmplit tre -ɛn-film sistɛm, inklud rɛsin, adeziv, ink, kɔtin, lɛbl, lokal kɔlɛkshɔn lɔ, ɛn aktual risaykul infrastukchɔ.

Tipik Aplikeshɔn dɛn

• CPET rɛdi-mɛl trey dɛn

• Di it dɛn we dɛn dɔn pripia we dɛn dɔn frɔz ɛn kol

• Aylayn, relwe, ɔspitul, skul, ɛn institiushɔnal ketɛning

• It dɛn we gɛt shap, ebi, ɔ frɔzɛn it kɔmpɔnɛnt dɛn

• Fɔd we gɛt bɔku kɔmpawtmɛnt ɛn we gɛt big fɔmat trey dɛn

• Bekeri prodak, dɛzat, deli it, ɛn snek dɛn we dɛn dɔn pripia

• MAP pak fɔ mit, bɔd, sifud, ɛn it we dɛn dɔn pripia

• Kastom print prayvet-lɛbul it pak

Eksplɔrɔ HSQY dɛn CPET tre rɛnj ɛn lidding film kategori fɔ rilayt tre -ɛn-film pak opshɔn dɛn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Gi dɛn infɔmeshɔn ya so dat HSQY go ebul fɔ rɛkɔmɛnd di kɔrɛkt tik, strɔkchɔ, ɛn rol kɔnfigyushɔn:

1. Trey matirial, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul

2. Trey ɔdasay dimɛnshɔn, flɛnch wit, kɔmpawtmɛnt, ɛn fil wet

3. Di kayn it, shap ed, bon, frɔz komponent, ɔ risk fɔ pank

4. Trey-siling mashin brand, model, tul layout, ɛn kɔmɛshɔnal layn spid

5. Rikwayd nominal tik ɛn akseptabl tolɛreshɔn

6. Rol wit, lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn waynd dairekshɔn

7. I izi fɔ pul, midul-pil, ɔ weld-sil rikwaymɛnt

8. Friza, maykrowev, ɔvin, MAP , hot-fil, pasteurisation, ɔ retort prɔses

9. Anti-fɔg, ɔksijɛn barɛri, mɔstɔ barɛri, printin, pɔrfɔreshɔn, ɔ venting rikwaymɛnt

10. Fɔd-kɔntakt, maykreshɔn, kwaliti, ɛn dɛstineshɔn-maket dɔkyumɛnt dɛn we dɛn nid

11. Trayal kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn di de we dɛn aks fɔ lanch

Rikwest Kastɔm ​​Tiknɛs Film Sampul dɛn

Kastamayzeshɔn Savis dɛn

• Kastom 50–100 maykron nominal tik ɛn tolɛreshɔn

• Kastom 150mm, 230mm, 280mm, ɛn nɔ-standad rol wit

• Kastom rol lɔng, kɔr, ɔta dayamita, rol wet, ɛn waynd dairekshɔn

• I izi fɔ pul, midul-pil, ɛn weld-sil strɔkchɔ dɛn

• Anti-fɔg, standad-baria, ay-baria, MAP , friza-kɔmpatibl, ɛn ɔt-trit gred dɛn

• Fleksografik ɔ gravu printin fɔ logo, instrɔkshɔn, ɛn traceability

• Kastom ay mak, print ripit, transparent winda, perforeshɔn, ɛn ventin

• Sampul, tre kompitibiliti rivyu, ɛn prodakshɔn-layn trayal

• Kastom katon, rol lɛbl, palet mak, ɛn intanashɔnal delivri

Pak Pikchɔ fɔ Fɔd Film we de sial di trey

Di Opshɔn dɛn fɔ Pak ɛn Delivri

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumɛnt dɛn we de fɔ di fim gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di tɛknikal data sheet matirial , sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, rol inspekshɔn krayteria, ɛn dɛstineshɔn-maket dɔkyumɛnt dɛn we dɛn nid fɔ di ɛksaktɔ laminat.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifiket ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ sef fɔ it-kɔntakt. FDA ɔ SGS klem fɔ no di rayt ripɔt, di fim strɔkchɔ, di tɛst skɔp, di de, ɛn di kɔndishɔn dɛn we dɛn kin yuz fɔ kɔntakt it.

Globɛl Ɛgzibishin dɛn

Kwɛstyɔn dɛn we Dɛn Kin Aks Bɔku tɛm

Wetin na kɔstɔm tiknɛs it tre silin film?

Na lidding-film rollstock we dɛn mek ɔ kɔnvɔyt to wan sɛlɛkɛt nominal gej, wit, rol kɔnfigyushɔn, silin layt, ɛn fɛnshɔnal strɔkchɔ fɔ wan spɛshal tre ɛn pak prɔses.

Us tik tik dɛn de?

di nominal tiknes dεm we de fכm de frכm 0.05mm to 0.10mm, we ikwal to 50–100 maykron. Faynal tolerans fɔ kɔnfɔm insay di apruv tɛknikal spɛsifikɛshɔn.

Yu tink se fim we dɛn kin sial we tik kin bɛtɛ ɔltɛm?

Nɔ, di fim we tik kin mek i stif ɛn i nɔ kin panch, bɔt i kin mek bak di tin dɛn we dɛn kin yuz, di wet we dɛn kin rol, ɛn di tin dɛn we dɛn nid fɔ transfa ɔt mɔ ɛn mɔ. Di optimum gej na di tik we smɔl pas ɔl di paket ɛn layn tɛst dɛn.

Aw tiknɛs de afɛkt tre -sila pefɔmɛns?

Tiknɛs kin afɛkt di rol wet, mita fɔ wan rol, wɛb tɛnsiɔn, ɔt transfa, kɔt, trak, sil winda, peel fɔs, ɛn maksimal prodakshɔn spid.

Wan film tiknes kin sial ɛvri tre matirial?

Nɔ. Trey kɔmpatibiliti dipen mɔ pan di siling layt ɛn tre flɛnch kemistri. CPET , APET , PET/PE , PP, aluminiɔm, ɛn pepabɔd kin nid difrɛn strɔkchɔ.

Yu tink se i izi fɔ pul kɔstɔm tik fim?

Yɛs. I izi-pil, midul-pil, ɛn wɛl-sil strɔkchɔ dɛn kin evalyu pan difrɛn gej dɛn. Ɛni tik we dɛn prɔpɔz fɔ tɛst pan di aktual tre .

Yu tink se dɛn kin ad anti-fɔg?

Yɛs. Dɛn kin ad anti-fɔg tritmɛnt fɔ it dɛn we de na frij ɛn we gɛt mɔstɔ usay kɔndenseshɔn kin mek di prɔdak nɔ si di prɔdak.

Yu tink se dɛn kin saplae ay-baria fim fɔ MAP ?

Yɛs. Hεy-baria strכkchכ dεm kin evaluate fכ MAP . Gi di OTR, WVTR, gas miksɔp we dɛn nid, di kayn it, di tɛmpracha we dɛn de kip, ɛn di shelf-layf target.

Yu kin yuz standad BO PET/PE film frɔm −40°C to 220°C?

Wan yunivasal tɛmpracha klem nɔ fɔ aplay to ɛvri strɔkchɔ. Di ɛksaktɔl fim, tre , sil, it lod, stɔrɔj ​​kɔndishɔn, ɛn ɔt saykl fɔ tɛst togɛda.

Yu tink se dɛn kin print di fim bay dɛnsɛf?

Yɛs. Dɛn kin evalyu flexografik ɔ gravu printin fɔ logo, prodak infɔmeshɔn, kuk instrɔkshɔn, barɔd, QR kɔd, ɛn traceability.

Us rol dimɛnshɔn dɛn yu kin kɔstɔmayt?

Tiknes, wit, lɔng, kɔr ID, kɔr lɔng, rol wet, maksimal ɔta dayamita, sil-sayd ɔriɛnteshɔn, ɛn wayndin dairekshɔn kin kɔstɔmayz sɔbjɛkt to fisibiliti.

Wetin kin mek tik tik lid fim nɔ kin rɔtin ɔ trak fayn?

Di tin dɛn we kin mek i apin na we dɛn nɔ gɛt di rayt tɛnsiɔn, di we aw dɛn nɔ bil di rɔl fayn, di ed dɛn we dɔn pwɛl, di wet we di rɔl gɛt pasmak, di kɔr nɔ alaynɛd, di tik we dɛn kin chenj, di we aw dɛn nɔ kin kɔntrol di we aw dɛn kin unwind fayn, ɔ di mashin sɛtin dɛn we nɔ rayt.

Wetin na di minimum ɔda kwantiti?

Di MOQ na 500kg. Trial kwantiti dipen pan stok, strɔkchɔ, gej, wit, printin, ɛn kɔnvɔshɔn rikwaymɛnt.

Aw lɔng di prodakshɔn lida tɛm de?

Tipik lida tɛm na lɛk 10–14 dez afta dipɔsit ɛn fayn spɛsifikɛshɔn aprɔval. Print, ay-baria, ɔ spɛshal tɛmal gred kin nid mɔ tɛm.

A kin aks fɔ sampul bifo bɔku bɔku prodakshɔn?

Yɛs, i go bi se na di tin dɛn we de ɛn di tin dɛn we dɛn tɔk bɔt. Send di tre sampul, dimɛnshɔn, mashin ditil, gej we dɛn nid, it aplikeshɔn, stɔrɔj ​​kɔndishɔn, ɛn ɔt prɔses.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae kɔstɔm tiknɛs it tre silin film, BO PET/PE laminat, CPET , PET ɛn PP trey dɛn , plastic sheet matirial s, ɛn rilat pak prodak fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt gej sɛlɛkshɔn, fim-strɔkchɔ divɛlɔpmɛnt, rol kɔnvɔshɔn, printin, pil-fɔs divɛlɔpmɛnt, anti-fɔg ɛn barɛri sɛlɛkshɔn, sɛmpul, layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri fɔ it manifakta dɛn, kɔntrakt pak, pak distribyushɔn, aylayn keta, ɛn institiushɔnal it-savis saplay dɛn.

Kontakt HSQY fɔ Kastɔm ​​Tiknɛs Film