BO PET/PE Pakɛj Silin Film s we nɔ de ɔt, I izi fɔ Pil Tre Pakɛj Silin Film dɛn

Wetin Na BO we Nɔ De Ɔt PET/PE Pakɛj Silin Film ?

Hεt-rεsistant BO PET/PE lidding film na laminated tre -siling film wit biaxially oriented PET כta layt εn PE-bεys כ aplikεshכn-spεsifi k hεt-sil layεr. Di BOPET layt de gi klia, dimɛnshɔnal stebiliti, tɛnsiɛl trɛnk, pankchɔ rɛsistɛns, ɛn printabiliti, we di silan layt de mek di bon to wan kɔmpitabl it tre ɔ kɔntena.

HSQY de saplae nominal tiknes frɔm 0.052mm to 0.09mm , rol wit frɔm 150mm to 900mm , ɛn standad 500m rol wit kɔstɔm kɔnvɛnshɔn we de. Dɛn kin divɛlɔp klia, print, izi-pil, midul-pil, wɛld-sil, anti-fɔg, ɛn barɛri gred fɔ rɛdi it, prɔses it, ketɛning, ɛn ɔda tre -pak aplikeshɔn dɛn.

Impɔtant: 'Hɛt resistant' kin diskrayb sɔm difrɛn rikwaymɛnt dɛn, lɛk ay silin tɛmpracha, ɔt filin, pastɔrayzeshɔn, maykrowev rihit, ɔ kɔvɛnshɔnal-ɔvin yus. Wan standad BO PET/PE laminate nɔ fɔ ɔtomɛtik diskrayb as −25°C to 200°C dual-ovenable film. Di ekzak laminat, tre , it, tεmprachכ, di tεm we i de tek, εn di sial prכsεs fכ validet.

Wetin I Min fɔ Lid Fim?

Difrɛn we dɛn we dɛn kin pak di it kin mek di fim gɛt difrɛn kayn ɔt. Di gred we dɛn nid fɔ pik akɔdin to di aktual prɔses pas wan jenɛral tɛmpracha klem.

Hɛt-Resistant BO PET/PE Film Spɛsifikeshɔn dɛn

Di spɛsifikɛshɔn dɛn we de dɔŋ ya de kip di kɔrɛnt prodak infɔmeshɔn we dɛn de separet standad valyu dɛn frɔm aplikeshɔn-spɛsifi k klem dɛn. Faynal garanti pefɔmɛns fɔ de na di tɛknikal data sheet matirial , apruv sampul, ɛn bay ɔda.

Aw di Film Strukchɔ De Sɔpɔt Hɛt Resistɛns

Film Gred dɛn we nɔ de mek ɔt

Tray Matirial Kɔmpatibiliti

Di BOPET kyaria nɔ de disayd tre kɔmpitibliti. Di ɔt-sil layt fɔ mach to di tre flɛnch kemistri. Wan fizik tre sampul na di mכst rilibul bεsis fכ tεst.

Easy-Peel ɛn Weld-Seal Opshɔn dɛn

Di fɔs we di pil kin chenj afta dɛn dɔn kol am, friz am, i dɔn ɔt am bak na maykrowev, ɔ i dɔn ɔt am na ɔvin. Test di sil bifo ɛn afta di kɔmplit stɔrɔj ​​ɛn ɔt saykl.

Anti-Fɔg ɛn Ay-Baria Opshɔn dɛn

Anti-fog tritmɛnt de ɛp fɔ mek kɔndenseshɔn nɔ mek di it nɔ klia we dɛn de sho am kol. Wan anti-fɔg strɔkchɔ we nɔ de ɔt fɔ kip ɔl tu di klia ɛn sil trɛnk di tɛm we dɛn nid fɔ kip am ɛn rihit am bak.

hεy-baria film dεm kin inkכrporεt EVOH כ כda fכnshכnal layεr fכ MAP . Di wan dɛn we de bay fɔ gi di target OTR, WVTR, gas miksɔp, di kayn it, di tɛmpracha we dɛn de kip, di saykl we dɛn de ɔt, ɛn di shelf layf we dɛn nid.

Kritikal Tɛst fɔ Maykrowev ɛn Ɔvin Projɛkt

• Dimenshɔnal stebiliti: Chɛk shrinkage, kɔl, wrinkling, ɛn distɔrshɔn.

• Sil ritɛnshɔn: Mekɔp di sil trɛnk bifo ɛn afta yu dɔn kip am ɛn ɔt am.

• Pil bihayvya: Kɔnfɛm se di fim opin klin wan na di tɛmpracha we di kɔshɔma nid.

• Delamination resistance: Verifay se di laminate nɔ blista ɔ separet.

• Ink ɛn kɔtin rɛsistɛns: Chɛk di kɔlɔ, rɔb, smel, transfa, ɛn adheshon afta yu dɔn ɔt.

• Lik ɛn bɔrst pefɔmɛns: Evaluate stim prɛshɔn, likwid, ɔyl, ɛn it kɔntaminɛshɔn.

• Ventin: Kɔnfɛm if dɛn nid fɔ mek pɔrfɔreshɔn, slit vent, ɔ kɔshɔma piercing instrɔkshɔn dɛn nid.

• If yu fit fɔ kɔntakt yu it: Fɔ chɛk di rayt fim, ink, adeziv, di kayn it, di tɛm, ɛn di tɛmpracha.

Tray-Sealer ɛn Rol Kɔmpatibiliti

Gi di tre -sila brand ɛn mɔdel, film wit, kɔr insay dayamita, maksimal ɔda dayamita, rol wet, wayndin dairekshɔn, sil-sayd ɔriɛnteshɔn, ay-mak sɛns, tul layout, ɔpreshɔn spid, tɛmpracha, prɛshɔn, ɛn tɛm fɔ de.

Prodakshɔn trayal fɔ evalyu wɛb trakin, tɛnsiɔn, kɔt, print rɛjista, sil kɔntinyuiti, pil fɔs, lik, kɔntaminɛshɔn tolɛreshɔn, anti-fɔg pefɔmɛns, tɛmal shrinkage, ɛn paket pefɔmɛns afta di kɔmplit ɔt saykl.

Aplikeshɔn dɛn

• CPET rɛdi it fɔ maykrowev ɔ validet kɔvɛnshɔnal-ɔvin rihit

• Di it dɛn we dɛn dɔn pripia we dɛn dɔn frɔz ɛn kol

• Aylayn, relwe, ɔspitul, skul, ɛn institiushɔnal ketɛning

• Hot-fil ɛn pasteurized it pak afta validɛshɔn

• Mit, bɔd, sifud, ɛn pripia-fud MAP aplikeshɔn dɛn

• Dairy, bakery, deli, salad, ɛn it dɛn we dɛn dɔn prosɛs

• Prayvet-lɛbul it dɛn we nid fɔ print instrɔkshɔn fɔ ɔt

• Fɔd-savis ɛn kɔntrakt-pak ɔpreshɔn

Eksplɔrɔ HSQY dɛn CPET tre rɛnj ɛn lidding-film kategori fɔ kɔmpitabl pak opshɔn dɛn.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

1. Trey matirial, spɔlayt, prodak kɔd, drɔin, ɔ fizik sampul

2. Trey dimɛnshɔn, flɛnch wit, kɔmpatmɛnt, ɛn fil wet

3. Di kayn it, di ɔyl we de insay, di mɔstɔ lɛvɛl, ɛn di tɛmpracha we dɛn de ful-ɔp

4. Tɛmral prɔses we dɛn nid: fɔ sial nɔmɔ, fɔ ful-ɔp wit ɔt, pastɔrayzeshɔn, maykrowev, ɔ kɔvɛnshɔnal ɔvin

5. Minimum ɛn maksimal tɛmpracha ɛn totɛl ɛksplɔshɔn tɛm

6. If di lid de kɔntinyu fɔ de we dɛn de ɔt am bak ɛn if dɛn nid fɔ pul di briz

7. Tray-siling mashin brand, mɔdel, tul layout, ɛn layn spid

8. Film tiknes, wit, lɔng, kɔr ID, maksimal ɔta dayamita, rol wet, ɛn wayndin dairekshɔn

9. I izi-pil, had-pil, ɔ weld-sil rikwaymɛnt

10. Anti-fɔg, barɛri, printin, pɔrfɔreshɔn, ɔ transparent-windo rikwaymɛnt dɛn

11. Di dɔkyumɛnt dɛn we dɛn nid fɔ kɔntakt fɔ it, fɔ muv, fɔ kwaliti, ɛn fɔ de na di makit usay yu want fɔ go

12. Trayal kwantiti, ɛni ia volyum, ples fɔ go, ɛn di de we dɛn lanch

Rikwest Film Samples we Nɔ De Ɔt

Kastamayzeshɔn Savis dɛn

• Kastom 0.052–0.09mm tik ɛn tolɛreshɔn

• Kastom 150–900mm rol wit

• Kastom rol lɔng, kɔr, rol wet, ɔta dayamita, ɛn wayndin dairekshɔn

• I izi fɔ pul, midul-pil, had-pil, ɛn weld-sil strɔkchɔ dɛn

• Anti-fɔg, ay-baria, MAP , maykrowev-kɔmpatibl, ɛn kwalifay ɔvinable gred dɛn

• Fleksografik ɔ gravu printin we yu de yuz ink ɛn adeziv dɛn we fit di prɔjek

• Kastom ay mak, print ripit, transparent winda, perforeshɔn, ɛn slit vent

• Trey kompitibiliti rivyu, sampul rol, ɛn prodakshɔn-layn trayal

• Kastom katon, rol lɛbl, palet mak, ɛn intanashɔnal delivri

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumɛnt dɛn we de fɔ di fim gred we dɛn dɔn gri fɔ. Di wan dɛn we de bay fɔ aks fɔ di tɛknikal data sheet matirial , sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn, maykreshɔn ɔ kɔmplians ripɔt, tɛmal tɛst ripɔt, ɛn rol inspekshɔn krayteria fɔ di ɛksaktɔ laminat.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifiket ɛn nɔto prodak-spɛsifi k pruf fɔ sef fɔ it-kɔntakt. SGS ɔ it-kɔntakt klem fɔ sho di rayt ripɔt, di fim strɔkchɔ, di kayn it, di tɛmpracha, di tɛm we dɛn fɔ tek, ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

HSQY Intanɛshɔnal Ɛgzibishin dɛn

Prodakshɔn ɛn Pak

Pakɛj ɛn Delivri

Kwɛstyɔn dɛn we Dɛn Kin Aks Bɔku tɛm

Wetin na BO PET/PE lidding film we nɔ de wam?

Na laminated lidding film wit BOPET ɔta layt ɛn ɔt-sil strɔkchɔ we dɛn mek fɔ spɛsifikɛd ɛlevɛt-tɛmpracha silin, fil, rihit, ɔ kuk kɔndishɔn.

Na evri BO PET/PE lidding film ovenable?

No. BO PET/PE de diskraib wan brayt matirial famili. Kɔnvɛnshɔnal-ɔvin yus nid fɔ gɛt kwalifay strɔkchɔ we dɛn dɔn tɛst in fim, silan, adeziv, ink, tre , ɛn it sistɛm togɛda.

Yu tink se dɛn kin yuz di fim na maykrowev?

Aplikeshɔn-spɛsifi k maykrowev-kɔmpatibl gred dɛn kin divɛlɔp. Dɛn fɔ tɛst di paket fɔ si if i gɛt ventilashɔn, if i gɛt stim prɛshɔn, if i de kip di sil, if i gɛt ɔyl fɔ it, ɛn if i de opin.

Us tɛmpracha di fim go ebul fɔ bia?

Di valid tempɔret rɛnj dipen pan di ɛksaktɔ laminat ɛn ɛksplɔshɔn tɛm. Wan singl −25°C to 200°C klem nɔ fɔ aplay witout prodak-spɛsifi k tɛmal tɛst data.

Us trey dɛn fayn fɔ ovenable lidding film?

CPET na tin we dɛn kin yuz fɔ it rɛdi it dɛn we dɛn kin ɔvin. APET , PP, PET/PE , aluminiɔm, ɛn pepabɔd nid sɛpret kɔmpitibliti ɛn tɛmal-prɔses ɛvalueshɔn.

Yu tink se fim we izi fɔ pul we nɔ gɛt wam de?

Yɛs. Dɛn kin ebul fɔ evalyu di wan dɛn we izi fɔ pul, midul-pil, had-pil, ɛn weld-sil vɛshɔn dɛn. Pεl fכs fכ mכsu bifo εn afta di ful tεmכl saykl.

Yu tink se fim we nɔ de mek fɔg nɔ wam, de?

Yɛs. Anti-fog kin kam togεda wit sεlekt strכkchכ dεm we nכ de hεt fכ kol it dεm we leta dεn kin hεt bak.

Yu tink se dɛn kin yuz ay-baria fim fɔ MAP rɛdi it?

Yes, i de ɔnda di strɔkchɔ divɛlɔpmɛnt. Gi di OTR, WVTR, gas miksɔp we dɛn nid, stɔrɔj ​​tɛmpracha, ɔt saykl, di kayn it, ɛn di shelf layf we dɛn want.

Yu tink se dɛn kin print di fim bay dɛnsɛf?

Yɛs. Print kin inklud branding, prodak infɔmeshɔn, instrɔkshɔn fɔ kuk, barɔd, QR kɔd, ɛn fɔ tray fɔ no. Di ink ɛn adeziv dɛn fɔ fit fɔ di tɛmal prɔses we dɛn want fɔ du.

Us tik ɛn waid dɛn de?

Di pej we de naw de list 0.052–0.09mm tik ɛn 150–900mm waid, wit kɔstɔm rol lɔng ɛn kɔnvɔshɔn we de.

Wetin mek di fim kin shrink ɔ wrinkle we dɛn de sial am?

Di tin dɛn we kin mek i apin na we di tɛmpracha pasmak, di tɛm we i de de fɔ lɔng tɛm, di prɛshɔn we nɔ ivin, di tɛnsiɔn we di fim gɛt ay, di ɔt we nɔ fayn fɔ shrink, di tul we nɔ kɔrɛkt, ɔ wan strɔkchɔ we nɔ kɔmpitabl.

Wetin mek di sil kin pwɛl afta i dɔn ɔt di ɔvin?

If i nɔ wok, i kin bi bikɔs ɔf wan silan we nɔ fayn, we de adhesive softening, tre difɔmeshɔn, kɔntaminɛshɔn, stim prɛshɔn, it ɔyl, tɛmal shrinkage, ɔ wan saykl we pasmak tɛm-tɛmpracha.

Wetin na di minimum ɔda kwantiti?

Di MOQ we dɛn se naw na 1000kg. Sampul ɛn trayal kwantiti dipen pan di stok we de, strɔkchɔ, wit, printin, ɛn kɔnvɔshɔn rikwaymɛnt dɛn we de.

Aw lɔng di prodakshɔn lida tɛm de?

Tipik lida tɛm na lɛk 10–15 dez afta dipɔsit ɛn fayn spɛsifikɛshɔn aprɔval. Strukchɔ dɛn we dɛn print ɔ spɛshal ɔvin kin nid mɔ tɛm.

A kin aks fɔ sampul bifo bɔku bɔku prodakshɔn?

Yɛs, i go bi se di tin dɛn we de de ɛn di tin dɛn we dɛn tɔk bɔt. Send di tre sampul, mashin ditel, fud aplikeshɔn, tɛmpracha, ɔt tɛm, fim dimɛnshɔn, ɛn sil rikwaymɛnt.

Bɔt HSQY Plastik Grup

HSQY Plastic Group de saplae hot-resistant lidding films, BO PET/PE laminates, CPET , PET ɛn PP fud trey dɛn , plastic sheet matirial s, ɛn rilat pak prodak fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt fim-grɛd sɛlɛkshɔn, tɛmal-prɔses rivyu, tre kɔmpatibiliti, rol kɔnvɔshɔn, printin, pik-fɔs divɛlɔpmɛnt, anti-fɔg ɛn barɛri sɛlɛkshɔn, sɛmpul, prodakshɔn-layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri.

Kontakt HSQY fɔ Ɔt-Resistant Lidding Film