Yu de ya: Os » Lidding Films we dɛn kin mek » Sial Film fɔ APET Trey » BOPET/PETG Film we de silin » Jɛnɛral PET/PE Laminɛshɔn Fim

Share to:

Jɛnɛral PET/PE Lamineshɔn Film

Jɛnɛral PET/PE lamination film na wan ay-pafɔmɛnshɔn kɔmpɔzit matirial we fayn fɔ difrɛn pak ɛn protɛktiv aplikeshɔn dɛn. I de kɔba di supiriɔr mɛkanikal trɛnk ɛn tɛmal stebiliti fɔ polyethylene terephthalate (PET) wit di fayn fayn siling prɔpati ɛn fleksibiliti fɔ polyethylene (PE). I dual-layer strɔkchɔ de gi ɛksepshɔnal durabiliti, mɔstɔ rɛsistɛns ɛn adaptabiliti to wan rich industrial ɛn kɔmɛshɔnal rikwaymɛnt. I fayn fɔ ɔl tu ɔtomatik ɛn manual pak prɔses, dɛn de yuz am bɔku bɔku wan na di it, famasitik, industri ɛn kɔshɔma guds industri.

Mak:
HSQY we de wok
Tayp fɔ Prodakt:
Fleksibul Pakɛj Fim dɛn
Kɔlɔ:
Klia

Di tin dɛn we yu kin gɛt:



Aks

Jɛnɛral PET/PE Lamineshɔn Film

PET/PE Lamination Film Ovaviu Vidio

Wetin Na Jɛnɛral PET/PE Lamineshɔn Fim?

Jɛnɛral PET/PE lamination film na fleksibul maltilayer pak matirial we de kɔba wan PET ɔ BOPET ɔta wɛb wit wan polyethylene siling layt. PET de gi klia, stiffness, tensil strɛngth, dimɛnshɔnal stebiliti, ɔt rɛsistɛns we dɛn de kɔnvɔyt, ɛn wan fayn sɔfays fɔ rivas printin. PE de gi fleksibiliti, pankchɔ rɛsistɛns, mɔstɔ protɛkshɔn, ɛn ɔt siling.

Dɛn kin gi di strɔkchɔ as rolstɔk we dɛn print ɔ we dɛn nɔ print fɔ paus, sachet, bag, flɔ-rap pak, trey lid, protɛktiv pak, ɛn fɔm-fil-sil aplikeshɔn. Di rayt fim kɔnstrɔkshɔn fɔ bi akɔdin to di prɔdak we dɛn pak, di we aw dɛn sial am, di tɛmpracha fɔ ful-ɔp, di barɛri we dɛn nid, di spid we di mashin de spid, di kɔndishɔn fɔ kip di fim, ɛn di tin dɛn we dɛn nid fɔ fala di say we dɛn de go-maket.

Wan jenɛral PET/PE laminate nɔ fɔ ɔtomɛtik diskrayb as ay barɛri, retortable, ovenable, friza sef, risaykul, ɔ kɔmpitabl wit ɛvri trey ɛn siling mashin. Dɛn prɔpati ya nid fɔ gɛt aplikeshɔn-spɛsifi k strɔkchɔ ɛn validɛshɔn.

Krio Kɔrɛkshɔn to di Pej we De Naw

di bכdi kכntεnt we de naw na rPET rigid-shit tεmplat fכ blista pak εn tεmכfכm. I de diskraib 0.12–6mm shit, 1400mm wit, vaykum fɔm, GRS risaykul kɔntinyu, ɛn ESD opshɔn dɛn. Dɛn spɛsifikɛshɔn dɛn de nɔ de diskrayb di Jɛnɛral PET/PE Lamineshɔn Film we dɛn sho na di prɔdak taytul.

So dɛn fɔ riples di pej bɔdi, FAQ, midia kapshɔn, spɛsifikɛshɔn tebul, aplikeshɔn fil, ɛn kɔmplians stetmɛnt wit fleksibul-pak laminat infɔmeshɔn. Di HTML we yu kin si dɔŋ ya, dɛn rayt am fɔ PET/PE rolstɔk pas fɔ rigid rPET shit.

Jɛnɛral PET/PE Laminɛshɔn Film Imej dɛn

Klia PET PE laminated fleksibul pakej film rol

Klir PET/PE laminat rol

Transparent PET PE fleksibul pak ɛn silin film rol dɛn

Fim rol dɛn we dɛn dɔn chenj

Kastom-width PET PE laminated rollstock fɔ pak mashin dɛn

Rolstɔk we gɛt kɔstɔm-wid

PET/PE Pakɛj Aplikeshɔn Imej dɛn

PET PE lidding film we dɛn yuz pan wan it trey silin layn

Aplikeshɔn fɔ sial trey

Klia PET PE laminate we de protɛkt wan it trey we dɛn dɔn pripia

Paket we dɛn dɔn pripia fɔ it

PET PE pak film we dɛn yuz wit ɔtomɛtik trey silin ikwipmɛnt

Otomatik pak layn

Ɔda Pikchɔ dɛn we De Na di Prodak we De

PET pak matirial rɛfrɛns imej we dɔn de we dɛn kip frɔm di pej we de naw

PET pakej matirial rɛfrɛns

Di pak aplikeshɔn rɛfrɛns imej we dɔn de we dɛn kip frɔm di pej we de naw

Pakɛj aplikeshɔn rɛfrɛns

PET pak aplikeshɔn rɛfrɛns imej we dɔn de we dɛn kip frɔm di pej we de naw

Pakɛj aplikeshɔn rɛfrɛns

Aw di PET/PE Laminate Strukchɔ De Wok

Layer	Primary Function	Wetin Baya dɛn fɔ Kɔnfɛm
PET / BOPET Ɔta Wɛb	I de gi trɛnk, stiffness, klia, tɛmal stebiliti we dɛn de print ɛn lamine, ɛn wan prɛmiɔm printabl sɔfays.	Tik, haz, glos, shrinkage, korona tritmɛnt, prayma, print sayd, ɛn sɔfa-ɛnaji ritɛnshɔn.
Lay we de print	I de kɛr branding, prodak infɔmeshɔn, barɔd, instrɔkshɔn, ɛn traceability.	Sɔfayz ɔ rivas printin, ink kemistri, kɔlɔ kɔnt, print ripit, ay mak, ɛn maykreshɔn rikwaymɛnt.
Laminating Adhesive we yu kin yuz	Bond di PET ɔta wɛb to di PE silin wɛb.	Sɔlvɛnt-bɛs, sɔlvɛnt-fri, wata-bɛs, ɔ ɛkstrushɔn laminɛshɔn; di tɛm fɔ mɛn, di trɛnk we di bond gɛt, di ɔda we aw i de smɛl, ɛn di we aw i de muf.
PE Strukchɔral Layer	I de gi fleksibiliti, tafnɛs, pankchɔ rɛsistɛns, ɛn mɔstɔ-baria kɔntribyushɔn.	LDPE, LLDPE, mLLDPE, HDPE, ɔ blɛnd; tik, dart impak, pankshכn, εn fleks-krak rεsistεns.
PE Sealant Layer we de mek yu fil	Provayd ɔt silin ɛn hot-tak pefɔmɛns.	Sil initiashɔn tɛmpracha, sil winda, ɔt tak, kɔntaminɛshɔn tolɛreshɔn, sil trɛnk, ɛn prodak-kɔntakt kɔndishɔn.
Opshɔnal Fɔnshɔnal Laya	Ad ɔksijɛn barɛri, layt barɛri, aroma barɛri, anti-statik, anti-fɔg, mat, ɔ ɔda prɔpati dɛn.	EVOH, mɛtalayzeshɔn, fɔyl, kɔtin, aditiv, ɔ ɔda wɛb fɔ difayn sɛpret wan.

Jɛnɛral PET/PE Laminɛshɔn Film Spɛsifikeshɔn dɛn

Di prodak pej we de naw nɔ de pablish wan verified film tik, rol wit, rol lɔng, ɔ layt rεshɔn. Di fכlכw spεsifikεshכn fכm de avכyd fכ kכri ova di kכrekt rPET shit data. Faynal kɔmɛshɔnal valyu dɛn fɔ kɔnfyus insay di saplay kot ɛn apruv tɛknikal data shit.

Prɔpati	we De ɔ Projɛkt-Spɛsifi k Opshɔn	Sɛlɛkshɔn Rikwaymɛnt
Tayp fɔ Prodakt	Jɛnɛral-pɔpɔs PET/PE fleksibul pak laminat	Rollstock, pouch film, bag film, ɔ tre-siling gred
Tipik Strukchɔ	PET / adeziv / PE	Kɔnfɛm if PET min BOPET ɛn difayn ɛni layt
Film Tiknɛs	Kastom bay aplikeshɔn	Spɛsifik totɛl gej, PET gej, PE gej, ɛn tolɛreshɔn
Rol Width we yu de yuz	Kastom slitin we dɛn kin yuz	Spɛsifik wɛb wit, tolɛreshɔn, edj kwaliti, ɛn mashin limit
Di Lɛngth fɔ Rol	Wetin kɔmɔn	Spɛsifik kɔr ID, rol ɔdasay dayamita, rol wet, ɛn splais limit
Aw a luk	Klia, print, wayt, mɛtal, mat, ɔ kɔstɔm	Kɔnfɛm di krayteria fɔ di haz, glos, opasiti, ɛn di we aw pɔsin de si
Fɔ print	Gravure ɔ fleksografik; ɔda sistɛm dɛn bay prɔjek	Kɔnfɛm ink sistɛm, kɔlɔ dɛn, ripit, ay mak, ɛn sayd we dɛn de print
Laminɛshɔn we dɛn kin yuz	Sɔlvɛnt-bɛs, sɔlvɛnt-fri, ɛkstrushɔn, ɔ prɔjɛkt-spɛsifi k	Konfam adhesive, bon, kur, rεsidyual sכlvεnt, εn maygrεshכn
Tayp fɔ Sil	Lɔk sil, izi fɔ pul, ɔ standad ɔt sil bay prɔjek	di sil bihayvya na di PE fכmyuleshכn εn sabstεrayt de kכntro am
Sɔntin we stɔp yu	Standart, midul, ɔ ay barɛri bay strɔkchɔ	Spɛsifik OTR, WVTR, layt barɛri, aroma barɛri, ɛn tɛst kɔndishɔn dɛn
Yuz di Tɛmpratura	Ambient, chilled, frozen, hot fil, pasteurization, ɔ thermal prɔsesin bay gred	Nɔ tink se yu de yuz retort, maykrowev, ɔ ɔvin
Fɔd Kɔntakt	Yu kin gɛt fɔ di gred dɛn we dɛn dɔn gri fɔ fɔ pak it	Spɛsifik di kayn it, di tɛm, di tɛmpracha, ɛn di rigyuleshɔn fɔ di say we yu want fɔ go-maket
MOQ we gɛt fɔ du wit am	Kɔnfɔm bay strɔkchɔ ɛn kɔnvɔshɔn rikwaymɛnt	Print, spɛshal, narrow-width, ɔ high-barrier ɔda dɛn kin gɛt ay MOQ
Lid Taym	Kɔnfɛm afta spɛsifikɛshɔn ɛn artwok aprɔval	Dipen pan di fim strɔkchɔ, printin, adhesive cure, ɛn ɔda saiz

PET ɛn PE de Du Difrɛn Fɔnkshɔn dɛn

Prɔpati	PET / BOPET Layer	PE Layer
Mekanikal Rol we pɔsin kin du	Stifnɛs, tɛnsiɛl trɛnk, dimɛnshɔnal stebiliti, ɛn print rɛjista.	Fleksibiliti, tafnɛs, pankchɔ rɛsistɛns, ɛn impak pefɔmɛns.
Di Rol fɔ Print	Dɛn kin yuz am as di rivas-print ɔda wɛb.	Yu kin print am insay sɔm strɔkchɔ dɛn we yu dɔn pik bɔt na di silan wɛb mɔ.
Di Rol we di Hɛt-Silin De Du	Standard BOPET na nɔmal wan nɔto di men ɔt-sil layt.	I de gi ɔt silin, ɔt tak, ɛn pakej klos.
Moisture Barɛri fɔ di wata	I de gi limited wata-vapour protɛkshɔn we yu kɔmpia am wit polyolefin silan.	כltu i de gi di praymar mכsichכ-barεri kכntribyushכn.
Ɔksijɛn Barɛri	I de gi yusful jenɛral ɔksijɛn ɛn aroma protɛkshɔn bɔt nɔto ɔtomɛtik ay barɛri.	Jɛnɛral wan, di ɔksijɛn barɛri kin smɔl; Dɛn kin ad EVOH, fɔyl, mɛtalayzeshɔn, ɔ kɔtin.
Tɛmral Kɔnvɔtmɛnt	I de ɛp fɔ mek i nɔ tinap tranga wan we dɛn de print, drɛy, ɛn lamin.	Silant tεmprachכ εn tεmral εkspכzכn dipכnt pan di PE fכmyuleshכn.

PET/PE Nɔto Ɔtomɛtik wan Ay-Baria Film

Wan standad klia PET/PE laminate de gi yusful protɛkshɔn, bɔt i nɔ fɔ ɔtomɛtik diskrayb as ay-baria strɔkchɔ. Fɔ pak fɔ ɔksijɛn-sɛnsitiv, aroma-sɛnsitiv, layt-sɛnsitiv, ɔ lɔng-shɛlf-layf prodak kin nid EVOH, mɛtalayz PET, aluminiɔm fɔyl, PVDC, AlOx, SiOx, ɔ ɔda fɛnshɔnal barɛri.

Strukchɔ	Tipik Barɛri Fɔnkshɔn	Kɔmɔn Sɛlɛkshɔn Rizin
Klia PET / PE we yu kin yuz	Jɛnɛral mɛkanikal protɛkshɔn, mɔstɔ rɛsistɛns, silin, ɛn mɔdaret gas protɛkshɔn.	Dray it, tin dɛn we dɛn kin mek na os, tin dɛn we dɛn kin mek na injɔstri, ɛn jenɛral fleksibul pak.
PET / EVOH-PE we de na di wɔl	כksijεn εn aroma barεri we hכy wit transparent strכkchכ.	MAP, mit, chiz, it dɛn we dɛn dɔn pripia, ɛn tin dɛn we gɛt ɔksijɛn.
PET / PE we dɛn dɔn mek wit mɛtal	Impruv layt, ɔksijɛn, ɛn aroma protɛkshɔn.	Snek, kɔfi, paoda, it fɔ animal dɛn, ɛn prɔdak dɛn we nid fɔ gɛt opaque mɛtal barɛri.
PET / Aluminiɔm Foil / PE	Layt we rili ay, ɔksijɛn, mɔs, ɛn aroma protɛkshɔn.	Famasi, kemikal, kɔfi, paoda, ɛn dimand fɔ yuz fɔ lɔng tɛm.
PET / PE we dɛn kɔt	Barɛri ɔ sɔfayz funkshɔnaliti akɔdin to di kɔtin.	Speshal transparent barɛri, anti-fɔg, mat, ɔ kemikal-rɛsistɛns aplikeshɔn dɛn.

Ɔksijɛn Barɛri ɛn Mɔstɔ Barɛri fɔ Spɛsifiket Separet wan

Prɔpati	Wetin I Mezhɔ	Aw fɔ Spɛsifik am
OTR we dɛn kɔl OTR	Oksijɛn transmishɔn tru di laminat.	Stet cc/m²/de, temperechur, rilitiv humiditi, we, ɛn kɔmplit film strɔkchɔ.
WVTR	Wata-vapour transmishɔn tru di laminat.	Stet g/m²/de, temperechur, rilitiv humiditi, we, ɛn kɔmplit film strɔkchɔ.
Aroma Barɛri	Ritεnshכn כf aroma εn rεsistεns to כdor tכnfכs.	Yuz prodak-spɛsifi k sɛns ɔ pɔrmieshɔn tɛst usay nid de.
Layt Barɛri	Protekshɔn frɔm layt we pɔsin kin si ɛn we gɛt ɔltra vayolɛt.	Spesifi k opasiti, optik density, UV transmishɔn, ɔ transmishɔn spɛktrum.
Whole-Pack Barɛri fɔ di wan dɛn we de na di wɔl	Kɔmbayn pefɔmɛns fɔ fim, sil, kloz, ɛn pak jɔyometri.	Validɛt di paus, bag, ɔ trey we dɔn dɔn pas fɔ yuz di fim data nɔmɔ.

Wetin fɔ Print ɛn Grafik

PET/PE laminat dɛn kin rivas print bɔku tɛm na di PET sɔfays bifo dɛn laminate. Dis de protɛkt di ink we de insay di strɔkchɔ ɛn i de mek i gɛt glos ɛkstirian, bɔt di printin sistem fɔ mach wit di tritmɛnt, prayma, adeziv, prɔdak, ɛn di we aw dɛn de yuz am ɛnd.

Di we aw dɛn kin print: rotogravure, flexographic, UV-flexo, dijital, ɔ ɔda we we kwalifay
Ink sistem: solvent-based, wata-based, UV, EB, ɔ low-migration
Surface treatment: korona, kemikal prayma, ɔ spɛshal kɔtin
Surface ɔ rivas printin we dɛn kin print
Kɔlɔ kɔnt, spat kɔlɔ, wayt ink, mɛtal ink, ɛn varnish
Print ripit, ay-mak dimɛnshɔn, ɛn kɔt pozishɔn
Barkod ɛn QR-kɔd verifyeshɔn
Rɔb rɛsistɛns, ɔt rɛsistɛns, laytfastnɛs, ɛn kemikal rɛsistɛns
Residual-solvent ɛn ɔda limit dɛn
Maygrɛshɔn ɛn dizayn fɔ kɔntakt it

Adhesive Lamination ɛn Bond Strɔng

Lamination Sistem	Advantej	Valideshɔn Fokus
Adhesive we gɛt sɔlvɛnt	Strɔng pefɔmɛns ɛn brayt kɔmpatibiliti fɔ dimand strɔkchɔ dɛn.	Di wet we di kɔtin gɛt, we i de drɛy, di sɔlvɛnt we lɛf, i de mɛn am, i gɛt trɛnk fɔ bon, i de smɛl, ɛn i de muf.
Adhesive we nɔ gɛt sɔlvɛnt	Lɔw sɔlvɛnt ɛmishin ɛn efishɔnal ay-spid laminɛshɔn.	Miks rεshכn, kכt wet, kכl, slip intarakshכn, tכnel dεfεkt, εn bond divεlכpmεnt.
Adhesive we dɛn de yuz fɔ mek wata	Yuzful fɔ sɔm strɔkchɔ dɛn we dɛn dɔn pik ɛn sastaynabiliti ɔbjɛktiv dɛn.	Dray, humidity, surface compatibility, wata resistance, ɛn fainal bond.
Ekstrushɔn Laminɛshɔn	Yuz molten polimכr fכ bon wεb dεm εn i kin ad strכkchכ כ siling fכnshכnaliti.	Mεlt tεmprachכ, כksidεshכn, prayma, nεk-in, adheshon, tiknes yunifכmiti, εn tεmral histri.

Di laminate nɔ fɔ rilis fɔ kɔnvɔshɔn te di adeziv dɔn rich di kɔrɛkt we dɛn nid ɛn di trɛnk we i gɛt fɔ bond. If yu slit bifo tɛm, mek paus, ɔ ful-ɔp it kin mek yu delamination, smel, residual migration, ɛn seal failure.

Hɛt-Sil ɛn Hot-Tak Rikwaymɛnt dɛn

Paramita	Wetin Mek I	Impɔtant Kɔntrol we Dɛn Rikɔmɛnd
Sil Initiashɔn Tɛmpratura	Di tɛmpracha we smɔl pas ɔl we de mek wan sil we dɛn kin aksept.	Difayn wit di aktual mashin, di tɛm fɔ de, prɛshɔn, ɛn sil-jaw matirial.
Sil Window	Rɛnj bitwin minim ifɛktiv silin ɛn film damej ɔ distɔrshɔn.	Yuz wan tɛmpracha-prɛshɔn-dwɛl matris.
Hot Tak we yu de du	Strɔng we di sil gɛt we i stil wam afta di jaw dɛn opin.	Krio fɔ vertikal fɔm-fil-sil, likwid, paoda, ɛn ay-spid pak.
Sil Strɔng	Faynal pakej klos afta kol ɛn kondishɔn.	Difayn spɛshal in wit, tɛst spid, kɔndishɔn, ɛn akseptabl rɛnj.
Kɔntaminɛshɔn Tolɛreshɔn	Abiliti fɔ sial tru ɔyl, paoda, mɔstɔ, krɔm, ɔ prɔdak rɛsɛdyu.	Rɔn klin ɛn kɔntaminɛt-sil trayal dɛn.
I izi fɔ Pil ɔ Lɔk Sil	Kontrol di konsuma opin ɔ pɔrmanent pakej klos.	Yuz wan spɛshal fɔmulayt PE silan pas fɔ asum standad bihayvya.

Di Kɔmɔn Fɔmat dɛn fɔ Pak

Fɔmat	Tipik Yuz fɔ PET/PE Laminate	Ki Rikwaymɛnt
Premade Pouches we dɛn mek	Stand-ap, flat, tri-sayd-sil, zip, ɔ spɔt fɔmat dɛn.	Pouch stiffness, seal strength, drop resistance, zip ɔ spout kɔmpatibiliti.
Fɔm-Fil-Sil Rolstɔk	Vɛtikal ɔ ɔrizɔntal pak fɔ it, paoda, likwid, ɛn tin dɛn we pipul dɛn kin yuz.	Hot tak, COF, wɛb trakin, ay mak, layn spid, ɛn sil kɔntaminɛshɔn.
Sachet ɛn Stik Pak dɛn	Paoda, wata, kɔsmɛtik, os, ɛn mɛrɛsin we dɛn kin yuz wan tɛm nɔmɔ.	Smɔl-fɔmat rɛjista, kɔt, sial, barɛri, ɛn tear opin.
Tray Lidding we dɛn kin yuz	Hɛt-sial tɔp wɛb fɔ wan kɔmpitabl PE ɔ PE-kɔt flɛnch.	Trey kompitibiliti, sil winda, peel ɔ weld bihayvya, anti-fɔg, ɛn kɔt.
Protective Overwrap we de protɛkt pɔsin	Protɛkshɔn frɔm dɔst, mɔs, abrashɔn, ɔ fɔ ol.	Klar, taf, sial, shrinkage, ɛn pak apinans.
Indastrial Rolstɔk	Pakɛj fɔ komponent, hadwae, kemikal, ɛn kɔstɔma prodak.	Pankchɔ, kemikal kɔmpatibiliti, statik kɔntrol, ɛn traysabiliti.

Tipik Aplikeshɔn dɛn

Dray it, snek, kɔnfɛkshɔn, tin dɛn we dɛn kin mek fɔ mek bred, ɛn paoda dɛn
Sos, sizin, likwid, ɛn pat pak we yu de yuz kwalifay silin
Kɔfi, ti, it fɔ animal dɛn, ɛn prɔdak dɛn we gɛt aroma we de yuz wan ɔpgrɛd barɛri strɔkchɔ
Frɔzɛn, kol, ɔ ambient it dɛn we yu de yuz wan aplikeshɔn-spɛsifi k gred
Di tin dɛn we dɛn kin pak na os, fɔ kia fɔ yusɛf, fɔ mek yu bɔdi fayn, ɛn fɔ klin
Famasiutik ɛn mɛdikal pak afta matirial ɛn rigyuletɔri validɛshɔn
Indastrial komponent, hadwae, ilɛktroniks, ɛn protɛktiv pak
Print paus, bag, sachet, flɔ wrap, ɛn fɔm-fil-sil rolstɔk
Tray lidding fɔ wan kɔmpatib PE silin sɔfays

Mashin ɛn Rol Kɔmpatibiliti

Gi di pak-mashin brand ɛn mɔdel, ɔrizɔntal ɔ vertikal prɔses, maksimal wɛb wit, kɔr insay dayamita, maksimal rol ɔdasay dayamita, rol wet, unwind dairekshɔn, print ɔriɛnteshɔn, ay-mak sɛns, wɛb tɛnsiɔn, layn spid, silin-jaw dizayn, tɛmpracha, prɛshɔn, ɛn tɛm fɔ de.

Trayal fɔ evalyu rol trak, kɔl, statik, blɔk, COF, print rɛjista, kɔt, ɔt tak, fayn sil trɛnk, kɔntaminɛshɔn tolɛreshɔn, laminat bɔnd, pankchɔ, drɔp pefɔmɛns, ɛn pakej lik.

Kwaliti-Kɔntrol Rikwaymɛnt dɛn

Tɔtɔl tik ɛn layt rɛsɛshɔn: Kɔnfɛm totɛl gej, PET gej, PE gej, ɛn tolɛreshɔn.
Lamination bond: Test initial ɛn ful cured bond trɛnk.
Rizidul sɔlvɛnt: Difayn limit fɔ print ɛn adhesive-laminated it pak.
Sil initieshɔn, hot tak, ɛn sial trɛnk: Mach di pak mashin ɛn di prɔdak.
OTR ɛn WVTR: Stet tɛst kɔndishɔn dɛn we dɛn de klem barɛri.
Pankchɔ ɛn impak: Mach di edj dɛn fɔ di prɔdak, di ayt we di drɔp dɛn gɛt, ɛn di kɔndishɔn dɛn we dɛn de sheb.
COF ɛn blok: Kɔntrol di ay-spid fidin, unwinding, ɛn bag mek.
Optik kwaliti: Kɔnfɛm haz, glos, transparency, print apinans, ɛn difrɛns.
Rol kwaliti: Inspek di ed alaynɛshɔn, wrinkles, tɛliskɔp, splays, kɔr, ɛn wayndin dairekshɔn.
Odor ɛn maykreshɔn: Verifay afta ful adhesive cure ɛn pakej kondishɔn.

Prɔblɛm dɛn we Kɔmɔn ɛn Akshɔn dɛn fɔ Kɔrɛkt

Prɔblɛm	Posisibul Kɔz	Rikɔmɛnd Chɛk
Laminate Delaminɛshɔn we dɛn kin yuz	Nɔ kia fɔ am, i nɔ gɛt bɛtɛ adhesive coating weight, i nɔ trit am fayn, i nɔ gɛt dɔti, ɔ i nɔ kɔmpitabl adhesive.	Chek di enaji we de na di safa, di wet we di kɔtin gɛt, di we aw i dɔn mɛn, di trɛnk we di bond gɛt, ɛn di we aw i de kip am.
Wik Hɛt Sil	Lɔw tɛmpracha, nɔ inɔf dwel ɔ prɛshɔn, rɔng PE gred, ɔ kɔntaminɛshɔn.	Bil wan silin-windo matris ɛn tɛst di aktual pak prodak.
Sil De Opin We I Hot	Insufishɛnt hot tak ɔ pasmak prodak lod pan di sil.	Selekt wan silan we gɛt ay-ɔt-tak ɛn mek di mashin taym fayn.
Rol Krɔl dɛn	Laya tɛnsiɔn we nɔ balans, adhesive shrinkage, thermal history, ɔ tik we nɔ ivin.	Rivyu wɛb tɛnsiɔn, kɔrej, layt rɛsɛshɔn, ɛn stɔrɔj.
Ink ɔ Adhesive Ɔda	Di drying we nɔ kɔmplit, kɔnvɔshɔn bifo tɛm, sɔlvɛnt we lɛf pasmak, ɔ we nɔ gɛt inɔf fɔ mɛn.	Mekɔp di tin dɛn we lɛf, ɛkstɛnd di mɛrɛsin, ɛn rivyu di sɛtin dɛn we di drɔya de.
Pɔt Print Rɛjista	PET shrink, tɛnsiɔn we nɔ stebul, rol tɛliskɔp, ay-mak mistek, ɔ ɔt pasmak we i de drɛy.	Kontrol thermal shrinkage, tension, rol bild, ɛn sɛns sɛtup.

Fɔd-Kɔntakt ɛn Kɔmplians Dokumɛnt

Food-contact suitability de aplay to di komplit apruv film strכkchכ, nכto jכs to PET כ PE as jεnεrik polimכr nem dεm. Di wan dɛn we de bay fɔ difayn di kayn it, dairekt ɔ indayrɛkt kɔntakt, di tɛm we dɛn de kip am, di tɛmpracha, di we aw dɛn de ful-ɔp, di fat we de insay, di asid, ɛn di say we dɛn de go na di makit.

Komplit layt strɔkchɔ ɛn raw-matirial diklareshɔn dɛn
Teknik data shit ɛn sɛtifiket fɔ analisis
Fɔd-kɔntakt diklareshɔn fɔ di makit we dɛn want
Ɔl ɛn spɛshal maykreshɔn ripɔt usay dɛn nid am
Ink, adeziv, prayma, ɛn aditiv kɔmplians
Residual-solvent ɛn ɔda kɔntrol dɛn
Traceability, lot coding, ɛn chenj-kɔntrol prɔses
OTR, WVTR, sil, bond, ɛn mɛkanikal tɛst ripɔt usay dɛn klem

Risaykul ɛn Dizayn-fɔ-Risaykul Kɔnsidɛreshɔn

PET/PE na wan multi-polymer laminate ɛn i nɔ fɔ ɔtomɛtik diskrayb as risaykul na ɛvri makit. Di las rizɔlt dipen pan PET-to-PE rishɔ, adeziv, ink, kɔtin, zip, spɔt, lɛbl, prɔdak rɛsɛdyu, paket saiz, lokal kɔlɛkshɔn lɔ, ɛn risaykul infrastukchɔ.

We risaykul na di prayoritɛd, kɔmpia di kɔvɛnshɔnal PET/PE laminat wit wan MDO-PE/PE, BOPE/PE, ɔ ɔda PE-dominant dizayn. Ɛni ɔda we fɔ stil mit di tin dɛn we dɛn nid fɔ print, barɛri, stiffness, hot-tak, sial, pankchɔ, shelf-layf, ɛn mashin we dɛn nid.

Infɔmeshɔn we Yu nid fɔ gɛt Kɔrɛkt Kɔt

Fɔmat fɔ pak: rolstɔk, paus, sachet, bag, liding film, ɔ fim we de protɛkt
Prodakt we dɛn pak, fil wet, ɔyl, mɔstɔ, asid, aroma, paoda, ɛn shap-ɛj risk
Rikwayd totכl tiknes εn PET/PE layεr rεshכ
Di wit we dɛn nid, di wit we dɛn kin tolɛreshɔn, di lɔng we di rol lɔng, di kɔr ID, di ɔta dayamita, di wet we di rol gɛt, ɛn di dairekshɔn we dɛn kin waynd
Printin prɔses, kɔlɔ kɔnt, art wok, ripit lɔng, ay mak, ɛn print ɔriɛnteshɔn
Lamination method, adhesive tayp, ɛn bond-strɛngth rikwaymɛnt
Sil initiashɔn tɛmpracha, ɔt tak, sil trɛnk, izi fɔ pul, ɔ lɔk-sil rikwaymɛnt
OTR, WVTR, layt, aroma, ɔ kemikal-baria rikwaymɛnt wit tɛst kɔndishɔn
Ambient, chilled, frozen, hot-fil, pasteurization, retort, ɔ ɔda tɛmal kɔndishɔn
Pakɛj-mashin brand, mɔdel, spid, tɛmpracha, prɛshɔn, ɛn tɛm fɔ de
Fɔd-kɔntakt, famasitik, industri, sastaynabiliti, ɛn dɛstineshɔn-maket dɔkyumentri
Trayal kwantiti, anual volyum, dilivri dɛstineshɔn, ɛn lanch schedule

Rikwest PET/PE Laminate Sampl ɛn Prayz

Kastamayzeshɔn Savis dɛn

Kastom PET, PE, ɛn totɛl laminat tiknɛs
Kastom slit wit, rol lɔng, kɔr ID, ɔta dayamita, rol wet, ɛn wayndin dairekshɔn
Klia, print, wayt, mɛtal, mat, ɛn spɛshal vijual fɔmat dɛn
Gravure, flexographic, ɛn aplikeshɔn-spɛsifi k printin
Sɔlvɛnt-bɛs, sɔlvɛnt-fri, wata-bɛs, ɛn ɛkstrushɔn-laminɛshɔn strɔkchɔ dɛn
Standart sil, ay hot tak, lɔk sil, izi fɔ pul, ɛn silin dɛn we nɔ gɛt kɔntaminɛshɔn
EVOH, mɛtalayz PET, fɔyl, transparent barɛri kɔtin, anti-fɔg, anti-statik, ɛn UV opshɔn dɛn
Ambient, chilled, frozen, hot-fil, pasteurization, ɛn spɛshal tɛmal gred dɛn
Pɔch-mɛkin, tre-sial, flɔ-rap, ɛn fɔm-fil-sil prodakshɔn trayal
Kastom lɛbl, katon, palet mak, ɛn ɛkspɔt pak

Pakɛj ɛn Delivri

Packaging Item	Standart Arenjmɛnt	Kastamayzeshɔn
Sampul we dɛn de pak	Smɔl rol ɔ kɔt sɛmpul dɛn we dɛn protɛkt insay PE bag ɛn katon.	Lebul wit strɔkchɔ, tik, wit, tritmɛnt sayd, ɛn lɔt.
Rol Pakɛj we dɛn kin yuz fɔ mek tin dɛn	Rol dɛn we dɛn rap agens dɔst, mɔs, ed damej, ɛn tɛliskɔp.	Kor plɔg, suspension pak, katon, ɔ protɛktiv film.
Palet we dɛn kin pak	Plywood ɔ ɛkspɔt palet dɛn we dɛn pik akɔdin to di rol dimɛnshɔn.	Palet wet, stak, kɔna protɛkshɔn, ɛn strɛch rap.
Kɔntinɛnt we dɛn de lod	Lod optimized fɔ 20ft ɔ 40ft kɔntena dɛn.	Lod plan akɔdin to di rol dayamita, palet, ɛn di say we yu want fɔ go.
Di Tɛm dɛn fɔ Delivri	FOB, CIF, EXW, ɔ ɔda tin dɛn we dɛn gri pan.	Kɔnfɛm di say we yu de go, Inkɔtɛm, inshɔrans, ɛn kɔstɔm dɔkyumɛnt dɛn.
Lid Taym	Konfam afta strɔkchɔ ɛn artwok aprɔval.	Inklud printin, lamination, adhesive cure, slit, inspekshɔn, ɛn pak.

Kwaliti ɛn Kɔmplians Dokumɛnt

HSQY kin gi di tɛknikal, kwaliti-mɛnejmɛnt, inspekshɔn, ɛn matirial dɔkyumentri we de fɔ di PET/PE laminat we dɛn dɔn gri fɔ. Rikwest di tɛknikal data shit, kɔmplit strɔkchɔ, sɛtifiket fɔ analisis, fud-kɔntakt diklareshɔn usay i apɔynt, maykreshɔn ripɔt, bond-strɛng we, rɛsɛdyual-sɔlvɛnt kɔntrol, ɛn rol inspekshɔn krayteria.

ISO 9001 na kwaliti-mɛnejmɛnt-sistim sɛtifikeshɔn ɛn dɛn nɔ fɔ prɛzɛnt am as prodak-spɛsifi k pruf fɔ fud-kɔntakt sef, risaykul, barɛri, ɔ paket pefɔmɛns. SGS, FDA, RoHS, REACH, GRS, ɔ ɔda klem dɛn fɔ no di rayt fim, ripɔt, skɔp, ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

Kwaliti ɛn kɔmplians dɔkyumentri fɔ jenɛral PET PE lamination film

Globɛl Ɛgzibishin dɛn

2017 Shanghai Ɛgzibishin

2018 Shanghai Ɛgzibishin

2023 Saudi Ɛgzibishin

2023 Amɛrikan Ɛgzibishin

2024 Ɔstrelia Ɛgzibishin

2024 Amɛrikan Ɛgzibishin

2024 Mɛksiko Ɛgzibishin

2024 Paris Ɛgzibishin

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET/PE Lamination Film

Wetin na PET/PE lamineshɔn fim?

Na fleksibul laminat we de kɔba wan PET ɔ BOPET ɔta wɛb wit wan polyethylene siling wɛb fɔ print, trɛnk, mɔstɔ protɛkshɔn, tafnɛs, ɛn ɔt siling.

Wetin na di difrɛns bitwin PET/PE film ɛn PET sheet?

PET/PE film na fleksibul laminated rollstock fɔ pauch, bag, lid, ɛn pak. PET shit na tik rigid ɔ sɛmi-rigid matirial fɔ thermoforming ɛn blister pak.

PET/PE na di sem wit BOPET/PE?

Bɔku PET/PE fleksibul laminat dɛn de yuz BOPET as di ɔta wɛb, bɔt di tɛknikal data shit fɔ no di ɛksaktɔ PET gred ɛn ɔriɛnteshɔn.

Wetin di PET layt de du?

PET de gi stiffness, tensile strength, clarity, dimɛnshɔnal stebiliti, printabiliti, ɛn kɔnvɔyt ɔt rɛsistɛns.

Wetin di PE layt de du?

PE de gi fleksibiliti, pankchɔ rɛsistɛns, mɔstɔ-baria kɔntribyushɔn, ɔt tak, ɛn ɔt silin.

Na standad PET/PE film ay barɛri?

Nɔto ɔtomɛtik wan. Ay-baria aplikeshɔn dɛn kin nid EVOH, mɛtalayz PET, aluminiɔm fɔyl, ɔ spɛshal kɔtin wit mɛzhɔ OTR ɛn WVTR.

Yu tink se dɛn kin print PET/PE fim bay dɛnsɛf?

Yɛs. Gravure ɛn flexographic printin na tin we kɔmɔn, wit artwok, kɔlɔ, ripit, ay mak, ink, ɛn printin sayd we dɛn dɔn difayn fɔ di prɔjek.

Yu kin yuz PET/PE film fɔ paus?

Yɛs. I kin chenj to flat, stand-ap, zip, spouted, ɛn tri-sayd-sil paus dɛn we dɛn mek di strɔkchɔ fɔ di prodak ɛn paus fɔmat.

Yu kin yuz PET/PE film fɔ sial trey?

Yes, wen di PE sialant kompitibul wit di trey flange. Plɛn PET, PP, CPET, PS, ɔ aluminiɔm kin nid difrɛn silin layt.

Yu kin yuz PET/PE film fɔ frɔzɛn it?

Dɛn kin mek wan friza-grɛd laminat, bɔt dɛn fɔ tɛst di pankchɔ, impak, sil ritɛnshɔn, drɔp, fleks, ɛn post-friz pefɔmɛns.

Yu tink se dɛn kin ritort ɔ yuz PET/PE fim na ɔvin?

Wan jenɛral PET/PE laminat nɔ fɔ tek am se i fayn fɔ yuz rɛtɔt, maykrowev, ɔ ɔvin. Dɛn prɔses ya nid fɔ gɛt wan dediket strɔkchɔ ɛn validɛshɔn.

Wetin na hot tak?

Hot tak na di trɛnk we ɔt sil gɛt jɔs afta di siling jaw opin, bifo di sil dɔn fulɔp.

Wetin mek PET/PE laminate de delaminate?

Di kɔmɔn tin dɛn we kin mek i sik na we dɛn nɔ gɛt bɛtɛ adhesive curre, we dɛn nɔ de trit di korona fayn, di kɔntaminɛshɔn, di wet we di kɔtin nɔ kɔrɛkt, wet, we ɔt pasmak, ɔ tin dɛn we nɔ kɔmpitabl.

Yu tink se dɛn kin yuz PET/PE fim bak?

I nɔ fɔ ɔtomɛtik diskrayb se i kin risaykul ɔlsay bikɔs PET ɛn PE na difrɛn polima famili. Evaluate di komplit pakej ɛn lokal risaykul lɔ dɛn.

A kin aks fɔ sampul ɛn mashin trial?

Yes, i go bi se na di spesifikeshɔn ɛn di matirial we de. Gi di prɔdak, paket fɔmat, mashin, strɔkchɔ, printin, barɛri, sial, ɛn rol we yu nid.

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae PET/PE lamination films, print ɛn nɔ print fleksibul-pakej rolstɔk, lidding film, EVOH ay-baria film, BOPET ɛn BOPP film, PET ɛn PP trey, plastic sheet, ɛn rilat pak matirial fɔ intanashɔnal B2B kɔstɔma dɛn.

Di tim kin sɔpɔt laminate-strakchɔ sɛlɛkshɔn, printin, adhesive lamination, silant divɛlɔpmɛnt, barɛri rikwaymɛnt, rol kɔnvɔshɔn, pauch ɛn pak-layn trayal, kwaliti dɔkyumentri, ɛkspɔt pak, ɛn intanashɔnal delivri.

Kontakt HSQY fɔ PET/PE Lamineshɔn Film

Bifo:

Nɛks: