BOPET Izi-Pil Pɛrfɔret Lidin Film

BOPET Izi-Pil Pɛrfɔret Lidin Film fɔ Frut Trey

HSQY de mek kɔstɔm-print BOPET izi-pil perforated lidding film fɔ PP, APET , RPET ɛn ɔda kɔmpatibl frut ɛn prodyuz trey dɛn .

Dɛn mek di fim fɔ pak strawberry, bluberi, chɛri, chɛri tomato, greps, fresh prodɔkt ɛn ɔda prɔdak dɛm we nid fɔ sikyuɔr tre siling we dɛn kam togɛda wit kɔntrol ventileshɔn.

Di opshɔn dɛn we de inklud laser maykro-perforeshɔn, hot-nidul pɔrfɔreshɔn, makro ol, slit vent, anti-fɔg tritmɛnt, ay klia, kɔstɔm printin ɛn sabstret-spɛsifi k izi-pil sil layers.

Di BOPET layt de gi klia, stiffnɛs, dimɛnshɔnal stebiliti ɛn wan say we dɛn kin print. Wan aplikeshɔn-spɛsifi k silan layt de gi adheshon to di tre flɛnch we dɛn dɔn pik.

Di sil layt fɔ mach to di aktual PP, APET , RPET , PET ɔ CPET tre . wan standad fכmyuleshכn nכ fכ asum fכ sial ikwal to εvri tre sabstεrayt, kכla, risaykul-kכntεnt lεvεl כ flenj tritmεnt.

Perforated produce film na breathable bay dizayn. I kin gi wan sikyuɔr sil rawnd di tre flɛnch, bɔt dɛn nɔ fɔ diskrayb am se i kɔmplit wan we nɔ gɛt ɛya ɔ we i tayt lɛk likwid akɔdin to di wɛb we gɛt pɔrfɔt.

Film tiknes frɔm lɛk 0.05mm to 0.10mm de. Wan nominal 0.06mm strɔkchɔ na kɔmɔn prɔjek statin pɔynt, we de ɔnda pankchɔ rɛsistɛns, silin, printin ɛn pɔrfɔreshɔn rikwaymɛnt.

Kɔmɔn rol wit dɛn inklud 150mm, 230mm ɛn 280mm. Kastom wit, rol lɔng, kɔr dayamita, wayndin dairekshɔn ɛn rol wet de fɔ tre -siling mashin dɛn.

Dediket maykrowevable, stim-venting, ay-baria ɛn dual-ovenable CPET lidding film dɛn de as sɛpret strɔkchɔ dɛn. Dɛn pefɔmɛns klem ya fɔ validet yuz di aktual tre , it, ikwipmɛnt ɛn ɔt kɔndishɔn.

Eksplore di komplit HSQY lidding film range fɔ fresh prodɔkt, chilled it, rɛdi it ɛn kɔstɔmayz tre -siling aplikeshɔn.

Rikwest Lidding Film Prayz    Rikwest Trey-Siling Samples

BOPET Lidding Film Imej dɛn

Wetin Na BOPET Izi-Pil Lidin Film?

BOPET izi-pil lidding film na fleksibul pak film we de yuz biaxially oriented polyester as di outa ɔ sɔpɔtin layt ɛn aplikeshɔn-spɛsifi k ɔt-sil layt na di tre -kɔntakt sayd.

Di BOPET layt de gi tɛnsiɛl trɛnk, pankchɔ rɛsistɛns, optik klia, dimɛnshɔnal stebiliti ɛn wan fayn sɔfays fɔ rivas ɔ sɔfays printin.

di silan layεr dεn εnjinia fכ bon to wan spεsifi k tre mεtirial εn rilis pan wan kכntroled pil fכs we di kכnsumiכn opin di paket.

wan komplit strכkchכ kin inklud BOPET , adhesive, PE, EVA, modifyed polyolefin, anti-fכg kכtin, barεri kכt, prayma εn printin ink.

di ekzak strכkchכ fכ sεlekt akɔdin to di tre sabstεrayt, di kayn it, di ikwipmɛnt fכ sial, stכrej tεmprachכ, di fכs we dεn nid fכ pil εn di yus we di kכnsכm want.

Perforated prodyuz film vs. ovenable lidding film

Dɛn prɔdak ya nid difrɛn strɔkchɔ ɛn dɛn nɔ fɔ sheb wan yunivasal tɛmpracha, barɛri, silin ɔ pɔrfɔreshɔn spɛsifikɛshɔn.

BOPET Izi-Pil Lidding Film Spɛsifikeshɔn dɛn

Faynal spɛsifikɛshɔn dɛn fɔ bi bays pan di aktual tre , flɛnch kɔndishɔn, it, silin mashin, stɔrɔj ​​tɛmpracha, pɔrfɔreshɔn patɛn, print dizayn ɛn di opin pefɔmɛns we dɛn nid.

Tray Matirial Kɔmpatibiliti

Trey matirial nem dɛn nɔmɔ nɔ go du fɔ dɛn. Sil pefɔmɛns kin chenj wit risaykul kɔntinyu, pigmɛnt, minral fil, sɔfayz kɔntaminɛshɔn, flɛnch flatnɛs ɛn spɛsifi k rɛsin fɔmyulashɔn.

Micro-Perforated Lidding Film fɔ Fresh Prodyuz

Fresh frut ɛn vɛjitebul dɛn kin kɔntinyu fɔ blo afta dɛn dɔn pak dɛn bay we dɛn de it ɔksijɛn ɛn pul kabon dayɔgzayd, wata vaypa ɛn ɔt.

Wan paket we nɔ fayn we dɛn sial kin mek di kabon dayɔgzayd we pasmak, we nɔ gɛt bɛtɛ ɔksijɛn, kɔndɛns, fɛminɛshɔn, mold ɔ di kwaliti lɔs kwik kwik wan.

Maykro-perforeshכn de introdכks kalibrayt opin dεm we de inkrεs gas εn mכsichכ transmishכn we dεn de mεnten wan mכst klos protεktiv pakej.

Di ol dayamita we dɛn nid, di ol kwantiti ɛn patɛn dipen pan di prodyuz, fil wet, tre volyum, tɛmpracha, kol-chen profayl ɛn target shelf layf.

Prodyus-Spɛsifi k Pɛrfɔreshɔn Dizayn

Di tebul de gi dizayn kɔnsidareshɔn pas fiks pɔrfɔreshɔn rɛsipɛkt. Shelf-layf trayal yuz di aktual prodɔkt ɛn distribyushɔn kɔndishɔn dɛn nid fɔ de.

Izi-Pil Sil Pɔfɔmɛnshɔn

Wan sil we izi fɔ pul fɔ strɔng fɔ protɛkt di paket we dɛn de pak, transpɔt ɛn rital handel we i de kɔntinyu fɔ izi fɔ di kɔshɔma fɔ opin.

If di sil trɛnk smɔl pasmak, i kin mek di sil dɛn opin ɛn i kin mek di sik gɛt prɔblɛm. If di sil trɛnk pasmak, i kin te di fim, i kin mek di tre nɔ fayn ɔ i kin mek i nɔ izi fɔ opin di paket.

Anti-Fɔg Lidin Film

Kɔndenseshɔn kin fɔm we dɛn pak wam tin dɛn, we di paket go insay frij stɔrɔj ​​ɔ we di tɛmpracha de chenj we dɛn de sheb am.

Anti-fog tritmεnt de εp fכ kכndens mכsichכ fכ spre insay wan mכr yunifכm layεr pas fכ fכm dכplεt dεm we yu kin si we de obskכr di prכdak.

Anti-fɔg pefɔmɛns dipen pan di kayn tritmɛnt, di sayd we dɛn de kɔt, di kɔndishɔn we di it-kɔntakt, di humiditi, di tɛmpracha we dɛn de kip ɛn di jɔyometri we dɛn de pak.

Di anti-fɔg layt fɔ fayn fɔ di we aw dɛn want fɔ yuz di it-kɔntakt ɛn i nɔ fɔ ambɔg di ɔt silin, printin ɔ perforeshɔn pefɔmɛns.

Fruit Trey Lidding Film we dɛn print wit kɔstɔm

Kastom printin kin sho logo, prodak nem, nyutrishɔn infɔmeshɔn, traceability kɔd, opin instrɔkshɔn ɛn rital grafik.

Rivas printin kin posishun ink bitwin film layers ɛn ridyus dairekt abrashɔn ɔ fud-kɔntakt ɛksplɔshɔn, sɔbjɛkt to di fim kɔnstrɔkshɔn we yu dɔn pik.

Di artwok fɔ akɔn fɔ di tre siling flɛnch, perforeshɔn ples, ay mak, mashin dairekshɔn, ripit lɔng, peel tab ɛn print rɛjista.

Lɛbul, ink kɔvarej ɔ varnish nɔ fɔ blok di pɔrfɔreshɔn dɛn we dɛn nɔ want ɔ ridyus di gas-transmishɔn pefɔmɛns we dɛn bin want.

CPET Rɛdi-Mil Lidin Film Rikwaymɛnt dɛn

CPET trey dɛn na tin we dɛn kin pik fɔ rɛdi it dɛn we nid fɔ friz, maykrowev ɔt ɔ kɔvɛnshɔnal-ɔvin ɔt.

Wan frut- tre BO PET/PE perforated film nɔ fɔ yuz ɔtomɛtik wan as CPET dual-ovenable lid.

Ovenable lidding nid fɔ gɛt dediket strɔkchɔ we nɔ de ɔt, kɔmpitabl adeziv, ink we nɔ de ɔt ɛn wan sil layt we dɛn mek fɔ di CPET flɛnch.

Di kɔmplit paket fɔ validet yuz di aktual it, tre dimɛnshɔn, fil wet, ɔt tɛm, ɔt tɛmpracha, ɔvin tayp ɛn kɔshɔma instrɔkshɔn.

• Kɔnfɛm if di fim de kɔntinyu fɔ de na di tre we dɛn de kuk ɔ dɛn fɔ pul am.

• Kɔnfɛm if stim vent, laser skɔring ɔ kɔshɔma piercing nid fɔ de.

• Test film shrinkage, curling, brittleness ɛn sial trɛnk afta yu dɔn ɔt.

• Test ink, adhesive ɛn anti-fog stebiliti ɔnda di intended ɔt kɔndishɔn dɛn.

• Kɔnfɛm se di tre flɛnch nɔ de distɔrj ɛn brok di sil we yu de kuk.

• Kɔnfɛm di maksimal ɔt tɛmpracha tru kɔmplit pakej validɛshɔn bifo kɔmɛshɔnal yuz.

Fɔd-Kɔntakt Kɔmplians Rikwaymɛnt

Fɔd-kɔntakt kɔmplians fɔ kɔba di kɔmplit lidding-film strɔkchɔ pas fɔ jɔs kɔba di BOPET bays film.

Di asesmɛnt fɔ inklud di BOPET rɛsin, silant rɛsin, adeziv, prayma, ink, pigmɛnt, anti-fɔg ɛjɛn, prɔsesin ɛd ɛn ɛni barɛri kɔtin.

Di kɔstɔma dɛn fɔ sho di kayn it, di dairekt ɔ indayrɛkt kɔntakt, di tɛm we dɛn fɔ kip am, di tɛmpracha we dɛn de kip am, di kɔndishɔn fɔ ɔt ɛn di say we dɛn de go na di makit.

Di dɔkyumɛnt dɛn we dɛn kin yuz kin inklud diklareshɔn fɔ kɔmplians, fɔmyulashɔn stetmɛnt, ɔvala maykreshɔn tɛst, spɛshal maykreshɔn tɛst ɛn sɔpɔt rigyuletɔri infɔmeshɔn.

Baria ɛn Shelf-Layf Rikwaymɛnt dɛn

Perforated produk pakej ɛn ay-baria pak de sɔlv difrɛn shelf-layf prɔblɛm dɛn.

Prodyuz film yuz perforations fɔ inkrisayz kɔntrol gas ɛkshɛnj. Fim we gɛt ay barɛri de ridyus di gas ɔ mɔstɔ transmishɔn fɔ protɛkt prɔdak lɛk mit, chiz ɔ it we dɛn dɔn pripia.

Di wan dɛn we de bay we nid fɔ gɛt shelf-layf target fɔ gi di ɔksijɛn-transmishɔn rit we dɛn want, wata-vaypa-transmishɔn rit, pak edspɛs, stɔrɔj ​​tɛmpracha ɛn di prɔdak respirashɔn ɔ ɔksidɛshɔn rikwaymɛnt.

Shelf layf fɔ kɔnfyus tru kɔmplit paket tɛst pas fɔ infɛr frɔm di bays-film matirial nɔmɔ.

Risaykul ɛn Matirial Opshɔn dɛn

wan BO PET/PE laminat gεt mכr dan wan polimכr famili εn i nכ fכ dεskrεb am כtomatכk se i kin risaykul na εvri mכket.

Aktual risaykulbiliti dipen pan layt rεshכ, adeziv, ink, kכtin, pεrforeshכn, pakej separeshכn εn lokal kכlekshכn εn prכsεsin infrastכkchכ.

PP-based easy-peel lidding kin bi evaluate we di kɔstɔma want fɔ impɔtant kɔmpatibiliti wit wan PP tre risaykul strim.

Risaykul klem fɔ bi bays pan di kɔmplit pakej dizayn ɛn wan aplikebul makɛt-spɛsifi k asɛsmɛnt.

Aplikeshɔn dɛn fɔ BOPET Lidding Film

• Strawberry trey dɛn : Maykro-perforated, anti-fog film we dɛn disayn rawnd di pak wet ɛn kol chen.

• Blueberry trey dɛn : Breathable izi-pil film fɔ mek yu ebul fɔ si ɛn kɔntrol di mɔstɔ.

• Cherry trey dɛn : Print ɔ klia perforated film fɔ chilled rital pak.

• Chɛri tomato trey dɛn : Prodyuz-spɛsifi k ventileshɔn ɛn anti-fɔg opshɔn dɛn.

• Grep trey dɛn : Film we gɛt pɔrfɔret we dɛn mek fɔ mek di wata ɛn gas chenj.

• Fresh-kot prodyuz: Kastamayz gas-transmishɔn dizayn ɛn kol-chen validɛshɔn.

• Salad trey dɛn : Anti-fɔg ɛn izi-pil lid we dɛn mach to PP ɔ PET trey dɛn .

• Bakery trey dɛn : Klia ɔ print izi-pil film fɔ kol ɔ ambient prodak.

• PP fud trey dɛn : PP-kompatibl lid we de yuz wan validet sil layt.

• CPET rɛdi it: Dediket nɔ-perforated ɔ stim-venting ovenable lidding film.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• Film strɔkchɔ ɛn raw-matirial verifyeshɔn.

• Total tiknes ɛn individyual layt tiknɛs.

• Rol wit, rol lɔng, rol wet ɛn kɔr dayamita.

• Winding dairekshɔn, rol tɛnsiɔn, tɛliskɔp ɛn ed alaynɛshɔn.

• Tensile strength, elongation ɛn pankchɔ rɛsistɛns.

• Optik klia, haz ɛn glos.

• Printin kɔlɔ, rɛjista ɛn ripit lɔng.

• Ink adhesion, rub resistans ɛn blok.

• Residual-solvent testing usay i apɔynt.

• Perforeshכn dayamita, kwantiti, posishכn εn patεn akכda.

• Ɔksijɛn ɛn wata-vaypa transmishɔn usay dɛn nid am.

• Anti-fog testing na di spɛsifikɛd kol kɔndishɔn dɛn.

• Sil initiashɔn tɛmpracha ɛn ɔpreshɔn sil winda.

• Sil trɛnk yuz di aktual tre .

• Izi-pil fɔs ɛn peel-mɔd inspekshɔn.

• Burst, vacuum, dye-penetration ɔ ɔda lik tɛst we dɛn gri pan.

• Sil-through-contamination testing usay dɛn nid am.

• Kol-stɔrɔj ​​ɛn distribyushɔn tɛst.

• Maykrowev ɛn ɔvin tɛst fɔ dediket ɔt gred dɛn.

• Oval ɛn spɛshal maykreshɔn tɛst usay i apɔynt.

• Pak, palet ɛn kɔntena-lod inspekshɔn.

Kastom Lidding Film Opshɔn dɛn

• di film tiknes frכm lεk 50 to 100 maykron.

• Nominal 60-maykron frut- tre liding film.

• 150mm, 230mm, 280mm ɛn kɔstɔm rol wit.

• Kastamayz rol lɔng, rol wet ɛn kɔr dayamita.

• Fim dɛn we klia, we klia ɛn we dɛn print bay dɛnsɛf.

• Surface ɔ rivas printin we dɛn kin print.

• Laser maykro-pɔrfɔreshɔn.

• Pɔrfɔreshɔn wit ɔt-nidul.

• Makro ol ɛn slit vent dɛn.

• Opshɔnal anti-fɔg tritmɛnt.

• Izi-pil, midul-pil, had-pil ɛn weld-sil opshɔn dɛn.

• Sil layers fɔ PP, APET , RPET , PET ɛn CPET trey dɛn .

• Breathable prodyuz strɔkchɔ dɛn.

• Stɔkchɔ dɛn we gɛt ay barɛri fɔ pak it.

• Dediket maykrowevable ɛn dual-ovenable strɔkchɔ dɛn.

• PP-based mono-material-oriented opshɔn dɛn usay teknik wan fit.

• Kastomized katon, lebul, palet ɛn shiping mak.

Infɔmeshɔn we Yu nid fɔ mek yu gɛt Lidding Film Quote

• Trey matirial, spɔlayt ɛn prodak kɔd.

• Tray drawing, flange width ɛn ɔdasay dimɛnshɔn dɛn.

• Trey kala ɛn risaykul-kɔntinɛnt pasɛnt.

• Food prodak ɛn fil wet.

• Pak tempɔret ɛn stɔrɔj ​​tɛmpracha.

• Rikwayd shelf layf ɛn kol-chen profayl.

• Rikwayd film tik ɛn wit.

• Rol lɔng, maksimal rol dayamita ɛn kɔr saiz.

• Winding dairekshɔn ɛn print-sayd ɔriɛnteshɔn.

• Siling-mashin manifakta ɛn mɔdel.

• Sial tɛmpracha, prɛshɔn, tɛm fɔ de ɛn layn spid.

• Rikwayd peel fos ɛn sil mod.

• Maykro-perforeshɔn, makro-hol ɔ slit-vent rikwaymɛnt.

• Target gas-transmishɔn ɔ prodyuz shelf-layf rikwaymɛnt.

• Anti-fog rikwaymɛnt ɛn tɛst kɔndishɔn dɛn.

• Printin artwok, kala kɔnt ɛn ripit lɔng.

• Maykrowev, friza ɔ ɔvin-yuz kɔndishɔn dɛn.

• Rigyuleshɔn ɛn dɔkyumɛnt dɛn we dɛn nid fɔ kɔntakt fɔ it.

• Initial kwantiti ɛn ɛstimat ɛni ia dimand.

• Packing, destination port ɛn di de we dɛn nid fɔ sɛn am.

Send Yu Trey ɛn Fim Rikwaymɛnt dɛn

BOPET Lidding Film Data Shit

Daunlod di BOPET lidding film data we de sheet matirial dɔŋ ya.

Di teknikol data sheet matirial fɔ kɔrɛspɔnd to di ɛksaktɔ film strɔkchɔ, tre kɔmpatibiliti, tɛst mɛtɔd ɛn aplikebul tɛmpracha kɔndishɔn dɛn we dɛn de ɛvaluet.

Daunlod BOPET Lidding Film Data Sheet

Prodakshɔn ɛn Pak Imej dɛn

Pak ɛn Deliv

Sampul pak: Dɛn kin pak smɔl rol ɛn film sɛmpul dɛn insay bag dɛn we de protɛkt dɛn ɛn rigid katon dɛn.

Rol protɛkshɔn: Dɛn kin rap rol wit PE film, baria bag, kraft pepa ɔ ɔda tin dɛn we dɛn gri fɔ protɛkt.

Kor ɛn edj protɛkshɔn: Dɛn kin protɛkt di rɔl ɛnd ɛn kɔr fɔ ridyus di krɔsh, kɔntaminɛshɔn ɛn ed damej.

Palet pak: Dɛn kin lod lɛk 500–1000kg pan plai wud ɔ fumigation-fri palet akɔdin to di rol dimɛnshɔn ɛn di limit fɔ handel.

Kɔntena lod: Kɔntena lod kin bi lɛk 20 tan, we de ɔnda di palet kɔnfigyushɔn, kɔntena limit ɛn ligal wet ristrikshɔn.

Stɔrej: Stɔr di rol dɛn insay os insay klin, dray kɔndishɔn fa frɔm dairekt san layt, ɔt pasmak, mɔstɔ, dɔst ɛn strɔng smel.

Dilivri tɛm: EXW, FOB, CNF, CIF, DDU ɛn ɔda Incoterms we dɛn gri fɔ de.

Lid tɛm: Stɛndad prodakshɔn jɔs nid lɛk 10–12 wok dez afta dɛn dɔn kɔnfyus di strɔkchɔ, artwok, trayal rizɔlt, dipɔsit ɛn pak.

Sɛtifiket ɛn Kɔmplians Dɔkyumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin gɛt tɛknikal data sheet matirial s, sefty data sheet matirial s, diklareshɔn fɔ kɔmplians, maykreshɔn ripɔt, ristrikt-sɔbstans ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Dɛn fɔ diskrayb SGS akɔdin to di ɛksaktɔl tɛst we dɛn du ɛn dɛn nɔ fɔ prɛzɛnt am as yunivasal fud-sefty, ovenability, anti-fog ɔ risaykul sɛtifiket.

ISO 9001 gɛt fɔ du wit di manifakta in kwaliti-mɛnejmɛnt sistɛm ɛn i nɔ de indipɛndɛnt fɔ establish fud-kɔntakt, silin, pil, maykrowev ɔ ɔvin pefɔmɛns.

We dɛn nid fɔ gɛt ISO 9001 dɔkyumentri, kɔnfɔm di aplikebul sɛtifiket vɛshɔn, di pɔsin we gɛt am, di adrɛs fɔ mek am, di sɛtifiket skɔp ɛn di validiti tɛm fɔ di saplai fasiliti.

Ɛvri ripɔt fɔ kɔrɛkt to di ɛksaktɔl fim strɔkchɔ, print sistɛm, pɔrfɔreshɔn patɛn, tre sabstret ɛn di kɔndishɔn dɛn we dɛn bin want fɔ yuz.

HSQY Globɛl Ɛgzibishin dɛn

Wetin Mek Yu Pik HSQY as Yu Lidding Film Supplier?

• BOPET izi-pil lid film fɔ PP ɛn PET -based trey dɛn .

• Perforated prodyuz film fɔ bɛri, frut ɛn vɛjitebul.

• Laser maykro-perforeshɔn, hot-nidul perforeshɔn ɛn makro ol dɛn.

• Opshɔnal anti-fɔg ɛn ay-klariti pefɔmɛns.

• Strukchɔ dɛn we klia ɛn we dɛn print bay dɛnsɛf.

• Substrate-spɛsifi k izi-pil sil layers.

• Kastom film tik, wit, lɔng, kɔr ɛn wayndin dairekshɔn.

• Dediket chilled, baria, maykrowevable ɛn ovenable gred dɛn.

• Trayal rol fɔ tre -sial ɛn shelf-layf tɛst.

• Kastomiz rol lebul, katon ɛn palet pak.

• Intanɛshɔnal B2B prodakshɔn ɛn ɛkspɔt sɔpɔt.

Bifo bɔlk prodakshɔn, HSQY rikɔmɛnd fɔ tɛst di fim we yu dɔn pik yuz di kɔstɔma in aktual tre , silin mashin, it, stɔrɔj ​​kɔndishɔn, printin dizayn ɛn distribyushɔn prɔses.

Kontakt HSQY fɔ Trial Rol ɛn Prayz

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt BOPET Lidding Film

Wetin na BOPET izi-pil lidding film?

Na tre -silin film we de yuz BOPET sɔpɔt layt ɛn kɔntrol-pil ɔt-sil layt we mach wit di tre matirial.

Wetin izi fɔ pul am min?

I izi fɔ pul di lid min se dɛn kin pul di lid we dɛn sial bay we yu yuz kɔntrol fɔ opin we nɔ gɛt bɔku film tear, tre damej ɔ sil rɛsɛdyu.

Wan liding film de sial PP, PET ɛn CPET trey dɛn ?

Wan film famili kin inklud vεshכn fכ sεvεra tre mεtirial dεm, bכt di hεt-sil layt fכ mach εn tεst wit di aktual tre sabstεrayt.

Dis fim kin sial APET ɛn RPET frut trey dɛn ?

Yes, we dɛn yuz PET -kɔmpatibl sil layt ɛn sil trɛnk validet wit di aktual APET ɔ RPET tre .

Dis film kin sial PP trey dɛn ?

Yes, yuz wan PP-kompatibl silan strɔkchɔ ɛn validet silin tɛmpracha, prɛshɔn, tɛm ɛn peel-fɔs rɛnj.

Wetin na perforated lidding film?

Na liding film we gɛt kɔntrol maykro ol, makro ol ɔ vent we de alaw gas ɛn mɔstɔ fɔ chenj tru di paket.

Wetin mek dɛn kin yuz fim we gɛt pɔt fɔ pak frut?

Fresh prodɔkt kin kɔntinyu fɔ blo afta dɛn dɔn pak am. Pɔrfɔreshɔn kin ɛp fɔ balans ɔksijɛn, kabɔn dayɔgzayd ɛn mɔstɔ insay di paket.

Yu tink se di fim we gɛt lid we gɛt pɔt nɔ kin mek di briz nɔ go insay?

Nɔ, di flɛnch sil kin sikrit, bɔt di fim we gɛt pɔt kin mek pɔsin blo bay wilful ɛn i nɔ kin mek di briz krɔs di wɛb.

Yu tink se frut fim we gɛt pɔrfɔt nɔ kin lik?

Di flɛnch sil kin tɛst fɔ intɛgriti, bɔt pɔrfɔreshɔn dɛn de alaw gas ɛn pɔtɛnɛshɛl likwid paseshɔn ɛn dɛn nɔ fɔ diskrayb am as kɔmplit likwid-tayt.

Wetin na di difrɛns bitwin maykro ɛn makro pɔrfɔreshɔn?

Maykro-perforeshɔn na smɔl kɔntrol ol dɛn we dɛn kin yuz fɔ kalibrayt gas ɛkshɛnj, we makro ol dɛn kin gi big big ventileshɔn we pɔsin kin si.

Aw dɛn kin pik di pɔrfɔreshɔn patɛn?

Dɛn kin pik am akɔdin to di kayn prodyuz, di pak wet, tre volyum, stɔrɔj ​​tɛmpracha, kol-chen profayl ɛn di shelf layf we dɛn nid.

Yu tink se di sem pɔrfɔreshɔn fayn fɔ strawberry ɛn bluberi?

Nɔto fɔ se na so i bi. Difrɛn kayn prodɔkt, pak saiz ɛn kol-chen kɔndishɔn kin nid difrɛn ol saiz, kɔnt ɛn patɛn.

Yu tink se anti-fog tritmɛnt de?

Yɛs. Fɔd-kɔntakt-suitable anti-fɔg tritmɛnt kin de fɔ kol frut, prodɔkt ɛn ɔda frij pak.

Yu tink se anti-fɔg fim de mek di kɔndenseshɔn nɔ kam kpatakpata?

Anti-fog tritmɛnt de ridyus di drɔp dɛn we pɔsin kin si, bɔt di pefɔmɛns stil dipen pan di prodakt tɛmpracha, humiditi, kol-chen chenj ɛn di paket dizayn.

Yu tink se dɛn kin print di fim we de na di lid bay kɔstɔm?

Yɛs. Yu kin print logo, infɔmeshɔn bɔt di prɔdak, instrɔkshɔn fɔ opin, trasibiliti grafik ɛn rital dizayn.

Yu tink se we dɛn de print fɔ blok di ol dɛn we de mek di pɔt dɛn?

At wok, lɛbl ɔ kɔtin kin ambɔg di perforeshɔn, so di print ɛn perforeshɔn pozishɔn fɔ rɛjista we dɛn de disayn.

Us tik tik dɛn de?

Kastom tiknes frɔm lɛk 0.05mm to 0.10mm de, wit 0.06mm we dɛn kin yuz as prɔjek statin pɔynt.

Us rol wit dɛn de?

Di kɔmɔn wit dɛn inklud 150mm, 230mm ɛn 280mm. Kastom widths kin slit akɔdin to tre ɛn mashin dimɛnshɔn.

Us rol lɔng de?

Wan standad rol lɔng na lɛk 500m, wit kɔstɔmayz lɔng we de akɔdin to mashin ɛn hanlin rikwaymɛnt.

Yu tink se yu kin yuz dis BO PET/PE film na 220°C?

wan standad BO PET/PE frut-film strכkchכ nכ fכ כtomatik rayt fכ 220°C. Kɔnvɛnshɔnal-ɔvin yuz nid fɔ gɛt wan dediket ɔvinable strɔkchɔ ɛn kɔmplit paket tɛst.

Yu tink se dɛn kin yuz dis fim na maykrowev?

Maykrowev yus nid fɔ gɛt wan dediket strɔkchɔ, kɔmpitabl tre ɛn validet stim-vent ɛn ɔt instrɔkshɔn.

Yu tink se dɛn kin yuz di fim na friza?

Yuz friza na afta dɛn dɔn tɛst di film, sil ɛn tre fɔ brit, sil ritɛnshɔn ɛn opin pefɔmɛns na di tɛmpracha we dɛn nid.

BOPET lidding film fud sef?

Fɔd-kɔntakt suitabiliti dipen pan di kɔmplit film strɔkchɔ, it we dɛn want, tɛmpracha, kɔntakt durayshɔn ɛn dɛstineshɔn-maket rigyuleshɔn.

Yu tink se SGS ripɔt de pruv se dɛn de fala di lɔ we pɔsin kin gɛt wit it?

Na we di ripɔt kɔba di ɛksaktɔl fim strɔkchɔ, aplikebul rigyuleshɔn, it simulɛnt ɛn di kɔndishɔn dɛn we dɛn want fɔ yuz.

ISO 9001 pruv se di fim na fud gred?

Nɔ ISO 9001 na kwaliti-mɛnejmɛnt-sistim standad ɛn i nɔ de pruv indipɛndɛnt wan se i de fala di tin dɛn we pɔsin kin du wit it.

Na BO PET/PE lidding film risaykul?

BO PET/PE na wan multi-material laminate ɛn i nɔ fɔ ɔtomɛtik diskrayb as risaykul. Kɔmpatibiliti dipen pan di kɔmplit strɔkchɔ ɛn lokal risaykul sistɛm.

Yu tink se wan mono-material lidding film de?

PP-based mono-material-oriented lidding options kin evaluet fɔ PP trey dɛn we sial, klia, barɛri ɛn prɔsesin rikwaymɛnt dɛn alaw.

Wetin na di minimum ɔda kwantiti?

Di MOQ na lɛk 500kg. Kastom printin, sil layers, width ɛn perforation dizayn kin nid difrɛn kwantiti.

Yu tink se trial rol dɛn de?

Film samplε dεm we de naw εn limited trial rol dεm kin de fכ sil, pil, pεrforeshכn εn shelf-layf tεst.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshכn jεnarali nid fכ lεk 10–12 wok de afta dεn kכnfכm di strכkchכ, artwok, sεmpl, dipכsit εn pak.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di tre matirial, dimɛnshɔn, fim wit, it prodak, silin kɔndishɔn, pɔrfɔreshɔn, anti-fɔg, printin, kwantiti, pak ɛn ples fɔ go.

Get wan BOPET Lidding Film Quote

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae izi-pil lid film, perforated prodyuz film, anti-fog film, CPET trey dɛn , PP trey dɛn , PET fud kɔntena ɛn kɔstɔmayz it-pak matirial to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt frut pak, fud prɔsesɔ, tre manifakta, pak kɔnvɔta, impɔt ɛn distribyushɔn wit matirial sɛlɛkshɔn, tre -silin sɛmpul, kɔstɔmayz printin, prodakshɔn, inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ kot di prayz ɛn Trayal Rol