Kastom Akrilik Layt Gayd Panel

Kastom Akrilik Layt Gayd Panel Manufacturer

HSQY de mek kɔstɔm akrilik layt gayd panɛl fɔ ed-lit LED panɛl layt, advatayzmɛnt layt bɔks, sayn dɛn we gɛt layt, displei baklayt, X-ray fim viua, kɔntrol panɛl, dɛkɔretiv layt ɛn kɔstɔmayz optik asɛmbli.

Ɛni layt gayd panɛl na frɔm ay-transmishɔn ɔptik-grɛd PMMA ɛn dɛn mek am fɔ sheb layt frɔm ed-maunt LED dɛn akɔdin to di layt sɔfays.

Layt-ɛkstrakshɔn patɛn kin prodyuz bay laser dotin, laser grid engraving, layn engraving, UV printin ɔ skrin printin akɔdin to di panɛl dimɛnshɔn, LED pozishɔn, layt-input edj ɛn rikwayd iluminɛshɔn eria.

Kastom tiknes frɔm lɛk 1mm to 10mm de. Dɛn kin mek panɛl dɛn lɛk rɛktɛnj, skwea, sɛklɔ, ɛlips, ark, trayangul, ring ɛn kɔstɔmayz CNC-kat shep.

Wan-ɛj, tu-ɛj ɛn 4-ɛj layt-input dizayn dɛn de. Wan-sayd ɔ tu-sayd layt-ɛmit strɔkchɔ dɛn kin divɛlɔp bak akɔdin to di riflɛkta, difyuza ɛn haus kɔnfigyushɔn.

Faynal braytnɛs, luminous efyushɔn ɛn yunifom dipen pan di kɔmplit optik sistɛm, inklud di LED tayp, LED pitch, input-ɛj dizayn, dɔt patɛn, plet tiknes, riflɛkta, difyuza, edj finish, haus ɛn tɛmal kɔndishɔn.

Rikwest fɔ gɛt LGP Kɔt    Rikwest wan LGP Prototype

Akrilik Layt Gayd Panel Vidio

Wach di fim we de dɔŋ fɔ rivyu HSQY akrilik layt gayd panɛl ɛn layt aplikeshɔn dɛn we gɛt fɔ du wit am.

Kastom akrilik LGP Prodakt Imej

Wetin Na Akrilik Layt Gayd Panɛl?

Wan akrilik layt gayd panɛl, we dɛn kin kɔl bak LGP ɔ layt gayd plet, na optik PMMA sheet we dɛn mek fɔ kɔnvɔyt layt frɔm LED dɛn we dɛn kin put na di ɛj to big say we gɛt layt.

Layt kin go insay wan ɔ mɔ polish ɛj dɛn ɛn travul tru di akrilik bay we i de riflekshɔn insay.

Dɔt dɛn we dɛn rayt wit lɛsa, dɔt dɛn we dɛn print, grid dɛn, layn dɛn ɔ optik patikyula dɛn de ambɔg di intanɛnt layt pat ɛn dayrɛkt di pat dɛn we dɛn kin kɔntrol pan layt tru di panɛl sɔfays.

Di dot saiz, dip, shep ɛn spɛs de ajɔst akɔdin to di plet fɔ kɔmpɛns di chenj distans frɔm di LED sɔs.

Wan kɔmplit ed-lit asɛmbli nɔmal fɔ kɔba di LGP wit wan bɔt riflɛkta, wan frɔnt difyuza, LED strip dɛn, wan freym, ɔt-disipeshɔn kɔmpɔnɛnt dɛn ɛn wan fayn pawa saplai.

Aw wan Edj-Lit Layt Gayd Panɛl De Wok

Akrilik Layt Gayd Panel Spɛsifikeshɔn dɛn

Aw fɔ Pik Akrilik LGP Tiknɛs

Tiknes fɔ pik akɔdin to di LED pakej ayt, panɛl dimɛnshɔn, braytnɛs we dɛn nid, wet we dɛn alaw, dip we di freym de ɛn di mɛkanikal-sɔpɔt kɔndishɔn dɛn.

Layt-Input Ɛj Kɔnfigyushɔn dɛn

Laser-Engraved vs. Print Layt Gayd Panɛl dɛn

Optik Pɛfɔmɛns Rikwaymɛnt dɛn

Optik pefɔmɛns fɔ evalyu yuz wan kɔmplit protɔtayp wit di spɛsifikɛd LED dɛn, riflɛkta, difyuza, haus ɛn pawa saplai.

Factors We Afɛkt LGP Braytnɛs ɛn Yunifɔmiti

• Panɛl saiz: Lɔng layt-travul distans nid mɔ prɛsis patɛn kɔmpɛnshɔn.

• Panel tiknes: Tiknes de afɛkt LED kɔpl, wet, stiffness ɛn optik pat.

• LED pitch: Big spɛshal kin mek brayt ɛn dak band dɛn we pɔsin kin si nia di input edj.

• LED pakej ayt: Di emit eria fɔ alaynɛd ​​wit di layt-gayd edj.

• Ɛj polish: Ɛj dɛn we rɔf ɔ we nɔ ivin kin mek layt nɔ kam ɛn mek di layt nɔ brayt ɔltɛm.

• Dot density: Dot density nɔmal fɔ inkrisayz wit distans frɔm di LED sɔs.

• Dot dip ɛn saiz: If yu pul pasmak nia di LED dɛn, dat kin mek say dɛn we brayt ɛn ridyus di brayt we de fa fawe.

• Riflɛkta kwaliti: Wan layt we gɛt ay riflɛkɛshɔn biɛn de ridyus di layt we de lɔs.

• Difyuza sɛlɛkshɔn: difyushɔn we ay kin mek di vishɔnal yunifom bɛtɛ bɔt i kin ridyus di braytnɛs we dɛn kin transmit.

• Fram dizayn: Mɛkanikal prɛshɔn, ed mask ɛn ɛkspɛnshɔn ristrikshɔn kin afɛkt flatnɛs ɛn ɔtput.

• LED temperechur: If yu wam pasmak, i kin mek di LED layt go dɔŋ kwik kwik wan ɛn i kin afɛkt di we aw di kɔlɔ kin tinap tranga wan.

Aplikeshɔn fɔ Akrilik Layt Gayd Panɛl dɛn

• Advatayz layt bɔks dɛn: Slim posta freym dɛn we gɛt layt ɛn rital prɔmoshɔnal displei dɛn.

• LED panɛl layt dɛn: Edj-lit kɔmɛshɔnal, ɔfis ɛn dɛkɔretiv layt fiks.

• Sayn dɛn we gɛt layt: Sayn dɛn fɔ kɔmɔt, sayn dɛn fɔ fɛn we, trafik sayn dɛn ɛn sayn dɛn we gɛt brand.

• X-ray film viewers: Yunifɔm baklayt fɔ fim wach ɛn inspekshɔn divays dɛn.

• LCD ɛn displei baklayt dɛn: Baklayt we dɛn mek fɔ di skrin ɛn inschrumɛnt dɛn we yu dɔn pik.

• Kɔntrol panɛl dɛn: Bɔtin dɛn we gɛt layt, aykɔn dɛn, ɔpreshɔn intafɛs ɛn inschrumɛnt panɛl dɛn.

• Ritayl displei: Shelf we gɛt layt, prodak stand, menyu bod ɛn prɔmoshɔnal fiks.

• Dekorativ laytin: Sɛkɔral, kɔba ɛn kɔstɔm-shep akitɔk layt ficha dɛn.

• Intɛriɔ fɔ motoka: Trim dɛn we gɛt layt, plet dɛn we gɛt domɔt-sil, simbul dɛn ɛn displei kɔmpɔnɛnt dɛn.

• Inspekshɔn laytin: Mashin-vishɔn, AOI ɛn vijual inspekshɔn iluminɛshɔn we de yuz wan ɛnjinɛri ɔptik sistɛm.

Kastom LGP Shep ɛn Fabrikɛshɔn

• Rɛktangul ɛn skwea panɛl dɛn.

• Sɛkɔral ɛn ɛliptik panɛl dɛn.

• Ark, ring ɛn kɔba profayl dɛn.

• Triangul ɛn pɔligɔnal panɛl dɛn.

• Kastom CNC-cut kontɔr dɛn.

• Maunt ol, slot, notch ɛn kebul opin.

• Polished LED input edj dɛn.

• Riflεktiv tritmεnt pan nכn-input edj dεm.

• Logo, simbul ɛn dɛkɔretiv pɔtn dɛn we dɛn rayt wit laser.

• Wan-sayd ɔ tu-sayd protɛktiv masking.

• Hεt-bεnt כ kכv kכmכpכnt dεm we de sכbjεkt to optik validεshכn.

Instɔlɛshɔn ɛn Tɛmral Ɛkspɛnshɔn Gaydlain

• Alaw sufayf kliarens fɔ PMMA tɛmal ɛkspɛnshɔn ɛn humiditi-rilayt dimɛnshɔnal chenj.

• Nɔ klem big panɛl dɛn so tayt dat we dɛn de ɛkspɛn, dat go mek yu bɔw ɔ strɛs na di ed.

• Yuz sɔpɔt dɛn we de flɔt ɔ ol dɛn we gɛt di rayt sayz fɔ put di tin dɛn usay nid de.

• Kip di LED ɛmitin sɔfays alaynɛd ​​wit di polish LGP input edj.

• Minimiz di optik gap bitwin di LED ɛn panɛl we yu de kip di ɛkspɛnshɔn kliarens.

• Nɔ gɛt dɔst, finga prɛnt, adhesive rɛsɛdyu ɛn skrach na di optik sɔfays.

• Gi fayn ɔt sink fɔ LED strip ɛn modul dɛn.

• Prɛvent riflɛkta ɛn difyuza layers fɔ mek optik bonding ɔ prɛshɔn mak dɛn we yu nɔ want.

• Yuz ed-riflɛktiv tep ɔ freym tritmɛnt pan edj dɛn we nɔ gɛt input usay nid de.

• Test di kɔmplit asɛmbli na di ays ɛn lɔs ɛkspɛkt savis tɛmpracha.

Indo ɛn Ɔda Aplikeshɔn dɛn

Standart kɔstɔm LGP asɛmbli dɛn na fɔ kɔntrol indo layt ɛn displei ɛnvayrɔmɛnt pas nɔmɔ dɛn spɛsifa di ɔda tin dɛn we dɛn nid.

Di we aw yu go fit fɔ de na do dipen pan di PMMA gred, LED mɔdyul, print patɛn, riflɛkta, difyuza, adeziv, freym, sil ɛn ilɛktrik ɛnklɔzhɔ.

Di projɛkt dɛn we de na do fɔ no di UV we dɛn go de, di tɛmpracha rɛnj, di humidity, ren we de kam, di ingress-protection rikwaymɛnt, di awa dɛn we dɛn de wok ɛn di tɛm we dɛn de op fɔ gɛt di savis.

Wan fiks savis-layf klem fɔ jɔs pablish we di kɔmplit sistɛm dizayn, kɔmpɔnɛnt spɛsifikɛshɔn, aksɛleret ol ɛn warranty tɛm dɛn sɔpɔt am.

Medikal ɛn Inspekshɔn Layt Aplikeshɔn dɛn

Yu kin yuz akrilik layt gayd panɛl dɛn as optik kɔmpɔnɛnt dɛn na ɛkstrem rayt fim viua dɛn, inspekshɔn layt dɛn ɛn sɔm mɛdikal-ikwipmɛnt baklayt dɛn.

Yuz insay mɛdikal divays kin nid fɔ gɛt ɔda kɔntrol fɔ di layt, yunifom, kɔlɔ tɛmpracha, flik, ilɛktrik sef, klin resistans ɛn traceability.

Layt gayd panɛl ɔ matirial sɛtifiket nɔ de indipɛndɛnt fɔ establish sɛtifiket fɔ di kɔmplit mɛdikal divays.

Rikɔmɛnd LGP Kwaliti-Kɔntrol Tɛst dɛn

• PMMA matirial ɛn optik-grɛd verifyeshɔn.

• Panel tiknes ɛn tiknɛs tolɛreshɔn.

• Lɛngth, wit, dayagɔnal ɛn profayl dimɛnshɔn.

• Hol, slot ɛn notch pozishɔn akkuracy.

• Panel flatness, bow ɛn wɔp.

• Input-edj polish ɛn sɔfays rɔfnɛs.

• Dot patɛn saiz, dip, density ɛn pozishɔn.

• Print-dot adhesion ɛn fɔ mɛn.

• Surface skrat, kɔntaminɛshɔn, bɔbul ɛn blak spat.

• Avrej, minim ɛn maksimal luminans.

• Luminans yunifɔmiti yuz di agreed mɛzhɔmɛnt grid.

• Kɔlɔ-tɛmpracha ɛn kromatik yunifɔmiti.

• LED hotspot ɛn input-ɛj brayt-band inspekshɔn.

• Far-edj dak-eria inspekshɔn.

• Layt lik frɔm di ed dɛn we dɛn nɔ yuz ɛn di say dɛn we de biɛn.

• Riflɛkta ɛn difyuza fit inspekshɔn.

• Tεmכl sayklin εn dimεnshכnal-stεbiliti tεst.

• Ay-tɛmpracha ɛn ay-humidity ol usay dɛn nid am.

• UV aging fɔ aplikeshɔn dɛn na do.

• Protektiv-film, pak ɛn shiping inspekshɔn.

Infɔmeshɔn we Yu nid fɔ mek yu gɛt Kastɔm ​​LGP Kɔt

• Panel lɔng, wit, tik ɛn shep.

• Enjinia drɔin ɛn dimɛnshɔnal tolɛreshɔn.

• Hol, slot, notch ɛn ed tritmɛnt dɛn we dɛn nid.

• Wan-sayd ɔ tu-sayd layt we de kɔmɔt.

• Wan-edj, tu-edj, tri-edj ɔ 4-edj LED input.

• LED manifakta ɛn mɔdel nɔmba.

• LED pakej dimɛnshɔn ɛn ɛmitin-sɔfays ayt.

• LED pitch, kwantiti ɛn distans frɔm di LGP edj.

• LED kala temperechur, CRI, bim angle ɛn luminous fluks.

• LED vɔlɔt, kɔrɛnt ɛn pawa.

• Riflɛkta-film mɔdel ɛn riflɛkɛshɔn.

• Difyuza matirial, tik, transmishɔn ɛn haz.

• Target avrej luminans ɛn yunifɔmiti.

• Rikwayd mɛzhɔmɛnt mɛtɔd ɛn akseptɛns standad.

• Envayrɔmɛnt fɔ ɔpreshɔn insay ɔ na do.

• Minimum ɛn maksimal ambiɛnt tɛmpracha.

• Di savis layf we dɛn nid ɛn di awa dɛn we dɛn de wok ɛvride.

• Prototype kwantiti ɛn mas-prɔdakshɔn kwantiti.

• Packing, destination ɛn di de we dɛn nid fɔ sɛn am.

Send Yu LGP Drawing ɛn LED Data

Sɛtifiket ɛn Projɛkt Dokumɛnt dɛn

Di dɔkyumɛnt dɛn we de kin inklud PMMA matirial data shit, dimɛnshɔnal inspekshɔn ripɔt, optik tɛst ripɔt, ristrikt-sɔbstans ripɔt ɛn kwaliti-mɛnejmɛnt sɛtifiket.

Optik pefɔmɛns ripɔt fɔ no di panɛl dimɛnshɔn, tiknes, LED mɔdel, LED kɔrɛnt, input edj, riflɛkta, difyuza, mɛzhɔmɛnt distans ɛn tɛst we.

Dɛn nɔ fɔ yuz jenɛral matirial sɛtifiket as pruf fɔ di layt, yunifom, layfspan ɔ ɔda pefɔmɛns fɔ wan kɔmplit layt panɛl we dɛn dɔn gɛda.

Wetin Mek Yu Pik HSQY fɔ Kastɔm ​​Akrilik LGP dɛn?

• Optik-grɛd PMMA layt gayd panɛl dɛn.

• Tiknes we dɛn kɔstɔmayz frɔm lɛk 1mm to 10mm.

• Rɛktangul, sɛkɔral, kɔba ɛn irɛgyula shep dɛn.

• Laser-dot, laser-grid ɛn print-dɔt patɛn.

• Wan-ɛj, tu-ɛj, tri-ɛj ɛn 4-ɛj layt-input dizayn dɛn.

• Wan-sayd ɛn tu-sayd ɛmishin strɔkchɔ dɛn.

• CNC kot, drɔlin, routin ɛn ed polish.

• Prototype divεlכpmεnt bifo mas prodakshכn.

• Optik tɛst akɔdin to di kɔndishɔn dɛn we dɛn gri pan di prɔjek.

• Kastomized protective masking ɛn ɛkspɔt pak.

• Sɔpɔt fɔ layt, sayn, displei ɛn ikwipmɛnt manifakta dɛn.

Bifo mas prodakshɔn, HSQY rikɔmɛnd fɔ prodyuz ɛn tɛst wan kɔmplit protɔtayp yuz di kɔstɔma in aktual LED, riflɛkta, difyuza, freym ɛn ilɛktrik sɛtin.

Rikwest Kastɔm ​​LGP Sampul ɛn Prayz

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm Bɔt Akrilik Layt Gayd Panɛl dɛn

Wetin na kɔstɔm akrilik layt gayd panɛl?

Na optik-grɛd PMMA panɛl we dɛn mek fɔ sheb layt frɔm ed-mawnt LED dɛn akɔdin to wan big layt we gɛt layt.

Aw akrilik layt gayd plet de wok?

Layt de go insay tru wan polish panɛl ed, de travul tru di PMMA ɛn dɛn de pul am tru laser-engraved, printed ɔ molded optical patterns.

Wetin na di difrɛns bitwin LGP ɛn difyuza plet?

Wan LGP de transpɔt ɛn pul di ed layt, we wan difyuza plet de spre di layt we de kɔmɔt ɛn ɛp fɔ ridyus di dɔt dɛn we pɔsin kin si, di hotspɔt dɛn ɛn di difrɛns bitwin di braytnɛs.

LGP nid fɔ gɛt riflɛkta?

Mɔs pan di wan-sayd-emishɔn sistem dɛn kin yuz wan riya riflɛkta fɔ ritɔn di layt we de dɔŋ to di say we layt ɛn ridyus di optik lɔs.

Us tik tik dɛn de?

Kastom akrilik LGP dɛn de insay tiknɛs frɔm lɛk 1mm to 10mm.

Us LGP tiknes a fɔ pik?

Tiknes fɔ pik akɔdin to di LED pakej ayt, panɛl saiz, layt-travul distans, braytnɛs we dɛn nid, wet ɛn instɔleshɔn spɛs we de.

Yu tink se dɛn kin kɔstɔmayt di panɛl saiz?

Yɛs. Lɛngth, wit, tik, ol, slot, notch ɛn ed tritmɛnt dɛn kin kɔstɔmayz akɔdin to injinɛri drɔin dɛn.

Yu tink se dɛn kin mek akrilik LGP dɛn insay kɔstɔm shep dɛn?

Yɛs. Dɛn kin mek sɛklɔ, ɛlips, ak, trayangul, ring ɛn irɛgyula CNC-kat shep dɛn.

Wetin na laser-dot layt gayd panɛl?

Na PMMA panɛl we gɛt wan arenjmɛnt we dɛn mek wit kɔmpyuta we gɛt maykrodɔt dɛn we dɛn rayt wit lɛsa we de pul ɛn sheb layt.

Wetin na print-dɔt LGP?

I de yuz UV-print ɔ skrin-print riflɛktiv dɔt dɛn na di PMMA sɔfa fɔ pul layt frɔm di panɛl.

Yu tink se fɔ rayt wit lɛsa bɛtɛ pas dɔt dɛn we dɛn print?

Nɔn pan dɛn tu we ya nɔ bɛtɛ ɔlsay na di wɔl. Di kɔrɛkt we fɔ du am dipen pan di panɛl saiz, di braytnɛs we dɛn nid, di kwantiti we dɛn de mek, di kɔst, di prɛsishɔn fɔ di patɛn ɛn di kɔndishɔn dɛn we de na di envayrɔmɛnt.

Yu tink se yu kin layt wan LGP frɔm wan ɛj?

Yɛs. Wan-ɛj layt pɔsibul, bɔt di we aw dɛn de pul am fɔ kɔmpɛns di layt we dɔn ridyus na di fa say.

Yu tink se yu kin layt LGP frɔm 4 ɛj?

Yɛs. Fo-edj input kin gi ay braytnɛs fɔ big panɛl bɔt i nid mɔ LED, pawa, waya ɛn ɔt manejmɛnt.

Yu tink se ɔl tu di say dɛn na akrilik LGP kin mek layt kɔmɔt?

Yɛs. Tu-sayd-emishɔn strɔkchɔ dɛn kin disayn we di riflɛkta ɛn sɔfayz kɔnstrɔkshɔn alaw layt fɔ kɔmɔt frɔm ɔl tu di fes dɛn.

Us LED infɔmeshɔn dɛn nid fɔ disayn di dɔt patɛn?

Gi di LED mɔdel, paket saiz, ɛmitin ayt, pitch, luminous fluks, bim angle, kala tɛmpracha, kɔrɛnt ɛn distans frɔm di panɛl edj.

Aw dɛn de mɛzhɔ LGP yunifom?

Dɛn kin mɛzhɔ yunifɔmiti bay we dɛn de yuz wan grid we dɛn gri pan fɔ di luminans pɔynt dɛn ɛn wan fɔmula we dɛn dɔn difayn lɛk di minim luminans we dɛn sheb wit avɛrej ɔ maksimal luminans.

Wetin mek dɛn kin si LED dɛn as brayt ples dɛn nia di ed?

LED imej dɛn we pɔsin kin si kin kɔmɔt frɔm di LED spɛshal we pasmak, distans we dɛn nɔ kin miks, di ed alaynɛshɔn we nɔ fayn, wan dɔt patɛn we nɔ fayn ɔ difyushɔn we nɔ kin du.

Wetin mek di say we de fa na di panɛl dak pasmak?

Di fa say kin dak we di layt-travul distans tu lɔŋ ɔ di ɛkstrakshɔn patɛn de pul tumɔs layt nia di LED ed.

Yu tink se dɛn kin yuz di panɛl na do?

Yuz na do na afta we dɛn dɔn validet di PMMA gred, LED modul, print patɛn, riflɛkta, difyuza, sil, freym ɛn ingres protɛkshɔn.

Wetin na di opareshɔn-tɛmpracha rɛnj?

Di fainal opareshɔn rɛnj dipen pan di PMMA gred, LED, ink, adeziv, riflɛkta, difyuza ɛn haus. Di kɔmplit asɛmbli fɔ gɛt tɛmal tɛst.

Aw lɔng akrilik layt gayd panɛl kin las?

Savis layf dipen pan LED tɛmpracha, opareshɔn awa, kɔrɛnt, PMMA gred, print patɛn, mɔstɔ, UV ɛksplɔshɔn ɛn di kɔmplit layt asɛmbli.

Yu tink se dɛn kin yuz di LGP fɔ mek pɔsin we de wach di fim dɛn we dɛn kin yuz fɔ mek ɛkstrem rayt?

Yɛs. Dɛn kin yuz kɔstɔmayz LGP dɛn as optik kɔmpɔnɛnt dɛn na ɛkstrem rayt fim viua dɛn, we de ɔnda di luminans, yunifɔmiti, kɔlɔ tɛmpracha ɛn divays standad dɛn we dɛn nid.

Yu tink se akrilik LGP nid fɔ gɛt ɛkspɛnshɔn kliarens?

Yɛs. PMMA de pan ɛn kɔntrakt wit tɛmpracha ɛn humiditi, so big panɛl dɛn nid fayn instɔleshɔn kliarens.

Yu tink se dɛn kin bɛn akrilik layt gayd panɛl?

Di PMMA panɛl dɛn we dɛn dɔn pik kin bɛn dɛn wit ɔt, bɔt di bɛnd prɔses kin afɛkt flatnɛs, intanɛnt strɛs ɛn optik yunifɔmiti ɛn dɛn fɔ validet dɛn.

PMMA beta pas PS fo layt gayd plet?

PMMA jɔs de gi strɔng optik klia ɛn wɛda pefɔmɛns, we dɛn kin pik PS fɔ lɔwa-kɔst indo aplikeshɔn dɛn. Di kɔrɛkt matirial dipen pan di optik, tɛmal, mɛkanikal ɛn kɔst rikwaymɛnt.

Yu tink se dɛn nid fɔ mek wan protɔtayp bifo dɛn mek am bɔku bɔku wan?

Dɛn kin rili kɔmɛnt fɔ mek wan protɔtayp bikɔs optik pefɔmɛns de dipen pan di aktual LED dɛn, riflɛkta, difyuza, freym ɛn ilɛktrik sɛtin dɛn.

Us fayl dɛn nid fɔ mek yu gɛt kɔstɔm LGP?

Gi wan dimɛnshɔnal PDF, DXF, DWG, AI ɔ STEP fayl togɛda wit LED ɛn optik-pɔfɔmɛnshɔn rikwaymɛnt dɛn.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di panɛl dimɛnshɔn, tik, shep, LED data, layt-input edj, riflɛkta, difyuza, target braytnɛs, yunifom, kwantiti ɛn ples fɔ go.

Get wan Kastom Akrilik LGP Kot

Bɔt HSQY Plastik Grup

HSQY Plastik Grup de saplae kɔstɔm akrilik layt gayd panɛl, akrilik shit, PVC shit, PET shit, PP shit ɛn kɔstɔmayz plastic kɔmpɔnɛnt to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt layt manifakta, sayn kɔmni, displei manifakta, ikwipmɛnt prodyusɔ, impɔt ɛn distribyushɔn wit matirial sɛlɛkshɔn, drɔin, protɔtayp, kɔstɔmayz prodakshɔn, inspekshɔn ɛn ɛkspɔt pak.

Rikwest wan Kot ɛn Prɔtotayp