Amanneɛbɔ Acrylic Hann Akwankyerɛ Panel

Amanneɛbɔ Acrylic Hann Akwankyerɛ Panel Manufacturer

HSQY yɛ amanne kwan so acrylic hann akwankyerɛ panels ma edge-lit LED panel akanea, dawurubɔ kanea nnaka, hann nsɛnkyerɛnne, display akyi kanea, X-ray sini viewers, control panels, decorative kanea ne customized optical nhyiam.

Wɔde high-transmission optical-grade PMMA na ɛyɛ hann akwankyerɛ panel biara na wɔayɛ sɛ ɛbɛkyekyɛ hann a efi LED ahorow a wɔde ahyɛ anoano mu wɔ hann no so.

Hann-yi nhwɛsode betumi ayɛ denam laser dotting, laser grid engraving, line engraving, UV tintim anaa screen tintim sɛnea panel nsusuwii, LED gyinabea, hann-input ano ne hann beae a wɔhwehwɛ.

Custom thicknesses fi bɛyɛ 1mm kosi 10mm wɔ hɔ. Wobetumi ayɛ panels sɛ rectangles, squares, circles, ellipses, arcs, triangles, rings ne customized CNC-cut shapes.

Nsusuwii a ɛwɔ ano biako, ano abien ne ano anan a ɛma hann a wɔde hyɛ mu no wɔ hɔ. Wobetumi nso ayɛ hann a ɛma hann a ɛwɔ ɔfã biako anaa abien no sɛnea reflector, diffuser ne dan nhyehyɛe te.

Awiei hann, hann a ɛyɛ adwuma yiye ne biakoyɛ gyina optical nhyehyɛe a edi mũ no so, a LED su, LED ɛnne, input-edge nhyehyɛe, dot nhwɛso, mprɛte thickness, reflector, diffuser, ano wie, dan ne ɔhyew tebea ka ho.

Bisa sɛ wɔmfa LGP ​​Quote mma    Bisa LGP ​​Prototype bi

Acrylic Hann Akwankyerɛ Panel Video

Hwɛ video a ɛwɔ aseɛ ha no na hwɛ HSQY acrylic kanea akwankyerɛ panels ne kanea dwumadie a ɛfa ho.

Amanne Acrylic LGP Aguade Mfonini

Dɛn Ne Acrylic Hann Akwankyerɛ Panel?

Acrylic hann akwankyerɛ panel, a wɔsan frɛ no LGP anaa hann akwankyerɛ mprɛte, yɛ optical PMMA krataa a wɔayɛ sɛ ɛbɛdan hann a efi LED ahorow a wɔde asisi ano no mu ayɛ no kɛse a hann wɔ so.

Hann fa ano biako anaa nea ɛboro saa a wɔayɛ no fɛfɛɛfɛ mu na ɛnam emu nsunsuanso so fa acrylic no mu.

Laser-engraved dots, printed dots, grids, lines anaa optical particles twa hann kwan a ɛwɔ mu no mu na ɛkyerɛ hann afã horow a wɔahyɛ so no fa panel no ani.

Wɔayɛ nsakraeɛ wɔ dot kɛseɛ, emu dɔ, ne nsɛsoɔ ne ne ntam wɔ mprɛte no so de tua kwan a ɛsakyeraeɛ firi LED fibea no ho ka.

Nhyiamu a edi mũ a ɛhyerɛn ano no taa ka LGP ​​no ne ase reflector, anim diffuser, LED strips, frame, ɔhyew-dissipation components ne ahoɔden a ɛfata bom.

Sɛnea Edge-Lit Light Guide Panel Yɛ Adwuma

Acrylic Hann Akwankyerɛ Panel Nkyerɛkyerɛmu

Sɛnea Wobɛpaw Acrylic LGP Thickness

Ɛsɛ sɛ wɔpaw thickness sɛnea LED package no sorokɔ, panel nsusuwii, hann a wɔhwehwɛ, mu duru a wɔma ho kwan, frame bun a ɛwɔ hɔ ne mfiridwuma-boa tebea horow te.

Hann-Input Edge Nsiesiei ahorow

Laser-Engraved vs. Wɔatintim Hann Akwankyerɛ Panels

Optical Adwumayɛ ho Ahwehwɛde

Ɛsɛ sɛ wɔde prototype a edi mũ a LEDs, reflector, diffuser, dan ne power supply a wɔakyerɛ no na ɛsɔ optical adwumayɛ hwɛ.

Nneɛma a Ɛka LGP ​​Hann ne Nsɛsoɔ

• Panel kɛse: Hann-kwan tenten hwehwɛ sɛ wotua nhwɛsode no ka pɛpɛɛpɛ.

• Panel thickness: Thickness nya LED coupling, mu duru, stiffness ne optical kwan so nkɛntɛnso.

• LED ɛnne: Ntrɛwmu akɛse betumi ama nhama a ɛhyerɛn na ɛyɛ sum a wotumi hu abɛn input no ano.

• LED package height: Ɛsɛ sɛ beae a emitting no ne hann-kwankyerɛ ano no hyia.

• Edge polishing: Edge polishing: Edges a ɛyɛ mmerɛw anaasɛ ɛnyɛ pɛpɛɛpɛ betumi atew hann a ɛba no so na ama hann a ɛnteɛ.

• Dot density: Dot density taa kɔ soro bere a ɛne LED fibea no ntam kwan ware no.

• Dot bun ne ne kɛse: Sɛ woyi fi mu dodo wɔ baabi a ɛbɛn LED ahorow no a, ebetumi ama mmeae a ɛhyerɛn aba na ama hann a ɛwɔ akyirikyiri no so atew.

• Reflector quality: Akyi a ɛwɔ reflectance kɛse no ma hann a ɛyera no so tew.

• Diffuser a wɔpaw: Diffuser a ɛkorɔn betumi ama aniwa a ɛyɛ pɛ atu mpɔn nanso ebetumi atew hann a wɔde fa so no so.

• Frame nhyehyɛe: Mfiri nhyɛso, anoano masking ne ntrɛwmu anohyeto betumi aka flatness ne output.

• LED hyew: Ɔhyew a ɛboro so betumi ama LED hann bo akɔ fam ntɛmntɛm na aka kɔla a ɛgyina pintinn.

Acrylic Hann Akwankyerɛ Panels a Wɔde Di Dwuma

• Dawurubɔ kanea nnaka: Poster frame a ɛyɛ tratraa a hann wom ne aguadidan mu nneɛma a wɔde hyɛ nneɛma ho dawuru.

• LED panel akanea: Edge-lit aguadi, adwumayɛbea ne afɛfɛde kanea fixtures.

• Nsɛnkyerɛnne a hann wom: Nsɛnkyerɛnne a ɛkyerɛ sɛnea wofi adi, nsɛnkyerɛnne a ɛkyerɛ ɔkwan a wɔfa so hwehwɛ, kar akwan ho nsɛnkyerɛnne ne nsɛnkyerɛnne a wɔakyerɛw so.

• X-ray sini ahwɛfo: Akyi kanea a ɛyɛ pɛ a wɔde hwɛ sini ne mfiri a wɔde hwehwɛ mu.

• LCD ne display akyi kanea: Akyi kanea a wɔayɛ ama screen ne nnwinnade a wɔapaw.

• Control panels: Buttons, icons, operator interfaces ne instrument panels a hann wom.

• Nneɛma a wɔde kyerɛ wɔ aguadidan mu: Nneɛma a wɔde gu nneɛma so a hann wom, nneɛma a wɔde gyina hɔ, menu boards ne nneɛma a wɔde hyɛ nneɛma ho dawuru.

• Kanea a wɔde siesie: Nneɛma a ɛyɛ kurukuruwa, ɛyɛ kurukuruwa na wɔayɛ no sɛnea wɔpɛ wɔ adansi mu kanea afã horow.

• Kar mu nneɛma: Nneɛma a wɔasiesie a hann wom, mprɛte a ɛwɔ ɔpon ano, sɛnkyerɛnnede ne nneɛma a wɔde kyerɛ.

• Nhwehwɛmu kanea: Mfiri-aniso, AOI ne aniwa nhwehwɛmu hann a wɔde engineered optical system di dwuma.

Custom LGP Shapes ne Nneɛma a Wɔde Yɛ

• Nnua a ɛyɛ ahinanan ne ahinanan.

• Nnua a ɛyɛ kurukuruwa ne nea ɛyɛ kurukuruwa.

• Arc, ring ne curved profile ahorow.

• Nnua a ɛyɛ ahinanan ne ahinanan pii.

• Amanneɛbɔ CNC-twitwa contours.

• Mounting ntokuru, slots, notches ne nhama a wobue.

• LED a wɔde hyɛ mu no anoano a wɔayɛ no fɛfɛɛfɛ.

• Reflective ayaresa wɔ non-input anoano.

• Laser-engraved logos, sɛnkyerɛnnede ne afɛfɛde nsusuwso.

• Ɔfã biako anaa ɔfã abien ahobammɔ masking.

• Ɔhyew-bent anaa curved nneɛma a ɛhyɛ optical validation ase.

Installation ne Thermal Expansion Akwankyerɛ

• Ma kwan ma kwan a ɛfata ma PMMA ɔhyew ntrɛwmu ne nsuo a ɛfa nsuo mu nsakraeɛ.

• Mfa nnua akɛse nkyekyere denneennen araa ma ntrɛwmu bɛma woakotow anaasɛ anoano nhyɛso aba.

• Fa nneɛma a ɛsensɛn nsu so anaasɛ ntokuru a wɔde si so a ne kɛse fata di dwuma wɔ baabi a ɛho hia.

• Ma LED emitting surface no ne LGP input edge a wɔayɛ no fɛfɛɛfɛ no nhyia.

• Minimize optical gap a ɛda LED ne panel ntam bere a kora ntrɛwmu clearance so.

• Kwati mfutuma, nsateaa nkyerɛwee, adhesive nkae ne nsensanee wɔ optical surfaces no so.

• Fa ɔhyew a ɛfata ma LED strips ne modules.

• Siw reflector ne diffuser layers kwan sɛ ɛremma optical bonding anaa pressure marks a wɔmpɛ.

• Fa edge-reflective tape anaa frame treatment di dwuma wɔ ano a ɛnyɛ input so wɔ baabi a ɛho hia.

• Sɔ nhyiam a edi mũ no hwɛ wɔ ɔsom mu hyew a wɔhwɛ kwan a ɛkorɔn na ɛba fam sen biara mu.

Nnwuma a Wɔde Di Dwuma wɔ Dan Mu ne Abɔnten

Standard custom LGP assemblies yɛ titiriw ama controlled dan mu kanea ne display mmeae gye sɛ wɔakyerɛ abɔnten ahwehwɛde.

Abɔnten so fata gyina PMMA grade, LED modules, tintim nhwɛso, reflector, diffuser, adhesive, frame, nsɔano ne anyinam ahoɔden enclosure.

Ɛsɛ sɛ abɔnten so nnwuma kyerɛ UV a ɛbɛda adi, ɔhyew a ɛwɔ hɔ, nsuo a ɛtɔ, osuo a ɛtɔ, ahobanbɔ a ɛhia wɔ hyɛn mu, nnɔnhwereɛ a wɔde yɛ adwuma ne berɛ a wɔhwɛ kwan sɛ wɔde bɛyɛ adwuma.

Ɛsɛ sɛ wotintim ɔsom nkwa nna ho asɛm a wɔahyɛ da ayɛ bere a nhyehyɛe no nhyehyɛe a edi mũ, nneɛma a ɛwom no ho nkyerɛkyerɛmu, onyin a ɛkɔ ntɛmntɛm ne warranty nsɛm foa so nkutoo.

Aduruyɛ ne Nhwehwɛmu Kanea a Wɔde Di Dwuma

Wobetumi de acrylic kanea akwankyerɛ panels adi dwuma sɛ optical components wɔ X-ray film viewers, nhwehwɛmu akanea ne aduruyɛ-adwinnade akyi kanea a wɔapaw.

Sɛ wɔde di dwuma wɔ aduruyɛ mfiri mu a, ebetumi ahwehwɛ sɛ wɔhwɛ hann, biakoyɛ, kɔla hyew, flicker, anyinam ahoɔden ahobammɔ, ahotew a ɛko tia ne nea wotumi hwehwɛ mu no so bio.

Hann akwankyerɛ panel anaa nneɛma ho adansedi krataa mfa ne ho nhyɛ adansedi krataa a ɛfa aduruyɛ mfiri a edi mũ no ho.

LGP Quality-Control Sɔhwɛ ahorow a wɔkamfo kyerɛ

• PMMA nneɛma ne optical-grade nokwaredi.

• Panel thickness ne thickness tolerance.

• Ne tenten, ne tɛtrɛtɛ, ne diagonal ne ne profile nsusuwii.

• Tokuru, slot ne notch gyinabea pɛpɛɛpɛ.

• Panel a ɛyɛ tratraa, bow ne warpage.

• Input-edge polishing ne soro roughness.

• Dot pattern kɛse, emu dɔ, density ne gyinabea.

• Printed-dot adhesion ne ayaresa.

• Nneɛma a ɛwɔ soro, efĩ, ahurututu ne nsensanee tuntum.

• Sɛ wɔkyekyem pɛpɛɛpɛ a, hann a ɛba fam ne nea ɛsen biara.

• Luminance uniformity a wɔde susuw grid a wɔapene so no di dwuma.

• Kɔla-ɔhyew ne chromaticity a ɛyɛ pɛ.

• LED hotspot ne input-edge hyerɛn-band nhwehwɛmu.

• Far-edge esum-beae nhwehwɛmu.

• Hann a ɛretu fi anoano ne akyi nneɛma a wɔmfa nni dwuma mu.

• Reflector ne diffuser fit nhwehwɛmu.

• Ɔhyew kyinhyia ne dimensional-stability sɔhwɛ.

• Ɔhyew a ɛkɔ soro ne ɔhyew a ɛkɔ soro onyin wɔ baabi a ɛho hia.

• UV onyin a wɔde di dwuma wɔ abɔnten.

• Protective-film, packing ne po so hyɛn nhwehwɛmu.

Nsɛm a Ɛho Hia ma Custom LGP Quote

• Panel tenten, ne tɛtrɛtɛ, ne kɛse ne ne nsusuwii.

• Engineering mfonini ne dimensional tolerance.

• Ntokuru, slots, notches ne ano aduru a ɛho hia.

• Hann a ɛba ɔfã biako anaa ɔfã abien.

• LED input a ɛwɔ ano biako, ano abien, ano abiɛsa anaa ano anan.

• LED yɛfo ne model nɔma.

• LED package nsusuwii ne emitting-surface sorokɔ.

• LED pitch, dodow ne kwan a ɛda LGP ​​ano.

• LED kɔla hyew, CRI, beam anim ne hann flux.

• LED voltage, mprempren ne tumi.

• Reflector-film nhwɛso ne reflectance.

• Diffuser nneɛma, ne kɛse, ne transmission ne haze.

• Target average luminance ne pɛyɛ.

• Ɔkwan a wɔhwehwɛ sɛ wɔfa so susuw nneɛma ne gyinapɛn a wogye tom.

• Baabi a wɔyɛ adwuma wɔ dan mu anaa abɔnten.

• Ɔhyew a ɛba fam ne nea ɛsen biara a atwa yɛn ho ahyia.

• Ɔsom nkwa nna a wɔhwehwɛ ne nnɔnhwerew a wɔde yɛ adwuma da biara da.

• Prototype dodow ne mass-production dodow.

• Packing, destination ne da a wɔhwehwɛ sɛ wɔde bɛkɔ.

Fa Wo LGP Mfonini ne LED Data Mena

Adansedi nkrataa ne Dwumadie Nwoma

Nwoma a ɛwɔ hɔ no betumi ayɛ PMMA nneɛma ho nsɛm nkrataa, dimensional inspection amanneɛbɔ, optical test amanneɛbɔ, restricted-substance amanneɛbɔ ne quality-management certificates.

Ɛsɛ sɛ optical adwumayɛ amanneɛbɔ kyerɛ panel no nsusuwii, ne kɛse, LED mfonini, LED mprempren, input anoano, reflector, diffuser, susuw kwan ne sɔhwɛ kwan.

Ɛnsɛ sɛ wɔde nneɛma ho adansedi krataa a ɛfa nneɛma nyinaa ho di dwuma sɛ adanse a ɛkyerɛ sɛnea kanea a wɔaboaboa ano awie no hyerɛn, ɛyɛ pɛ, nkwa nna anaa abɔnten so adwumayɛ.

Dɛn Nti na Wopaw HSQY ma Custom Acrylic LGPs?

• Optical-grade PMMA hann akwankyerɛ panels.

• Customized thicknesses fi bɛyɛ 1mm kosi 10mm.

• Nneɛma a ɛyɛ ahinanan, kurukuruwa, ɛyɛ kurukuruwa na ɛnyɛ pɛpɛɛpɛ.

• Laser-dot, laser-grid ne nea wɔatintim-dot nsusuwii.

• Nsusuwii a ɛwɔ ano biako, ano abien, ano abiɛsa ne ano anan hann-input designs.

• Nneɛma a ɛma mframa bɔne a ɛwɔ ɔfã biako ne ɔfã abien.

• CNC twa, drilling, routing ne ano polishing.

• Prototype nkɔso ansa na wɔayɛ no pii.

• Optical testing sɛnea adwuma no tebea horow a wɔapene so te.

• Customized ahobammɔ masking ne export packaging.

• Mmoa a wɔde ma wɔn a wɔyɛ kanea, nsɛnkyerɛnne, nneɛma a wɔde kyerɛ ne nnwinnade.

Ansa na wɔbɛyɛ no pii no, HSQY kamfo kyerɛ sɛ wɔnyɛ na wɔnsɔ nhwɛsode a edi mũ nhwɛ denam adetɔfo no LED ankasa, reflector, diffuser, frame ne anyinam ahoɔden nhyehyɛe so.

Bisa Custom LGP Nhwɛsode ne Bo

Nsɛm a Wɔtaa Bisa Fa Acrylic Light Guide Panels Ho

Dɛn ne amanne kwan so acrylic hann akwankyerɛ panel?

Ɛyɛ PMMA panel a ɛyɛ optical-grade a wɔayɛ sɛ ɛbɛkyekyɛ hann a efi LED ahorow a wɔde asisi ano no mu wɔ baabi kɛse a hann wɔ so.

Ɔkwan bɛn so na acrylic hann akwankyerɛ mprɛte yɛ adwuma?

Hann fa panel ano a wɔayɛ no fɛfɛɛfɛ so hyɛn mu, fa PMMA no mu na ɛnam laser-engraved, printed anaa molded optical patterns so yi.

Nsonsonoe bɛn na ɛwɔ LGP ne diffuser plate ntam?

LGP de edge hann kɔ na ɛyi, berɛ a diffuser plate trɛw hann a ɛfiri mu ba no mu na ɛboa ma nsensaneeɛ a wotumi hu, mmeaeɛ a ɛyɛ hyeɛ ne hann nsonsonoeɛ so tew.

So LGP hwehwɛ sɛ wonya ade a ɛma wohu ade?

Nhyehyɛe dodow no ara a ɛma mframa bɔ wɔ ɔfã biako no de akyi hann a ɛma hann no san kɔ fam kɔ ​​baabi a hann wɔ no na ɛtew aniwa a ɛyera so.

Nneɛma a ɛyɛ den bɛn na ɛwɔ hɔ?

Custom acrylic LGPs wɔ hɔ a ne kɛse fi bɛyɛ 1mm kosi 10mm.

LGP thickness bɛn na ɛsɛ sɛ mepaw?

Ɛsɛ sɛ wɔpaw ne kɛse sɛnea LED package no sorokɔ, panel kɛse, hann-akwantu kwan, hann a wɔhwehwɛ, emu duru ne beae a ɛwɔ hɔ a wɔde besisi hɔ te.

So wobetumi ayɛ panel no kɛse sɛnea wɔpɛ?

Aane. Wobetumi ayɛ tenten, ne tɛtrɛtɛ, ne kɛse, ntokuru, slots, notches ne edge treatments sɛnea engineering mfonini ahorow kyerɛ.

So wobetumi ayɛ acrylic LGP ahorow a wɔayɛ no sɛnea wɔpɛ?

Aane. Wobetumi ayɛ kurukuruwa, ellipses, arcs, triangles, rings ne CNC-twit shapes a ɛnkɔ so daa.

Dɛn ne laser-dot hann akwankyerɛ panel?

Ɛyɛ PMMA panel a kɔmputa so mfonini nketenkete a wɔde laser ayɛ a ɛyi hann na ɛkyekyɛ wom.

Dɛn ne LGP a wɔatintim-dot?

Ɛde nsensanee a ɛma hann a UV tintim anaa screen-printed wɔ PMMA ani di dwuma de yi hann fi panel no mu.

So laser nkyerɛwee ye sen nsensanee a wɔatintim?

Ɔkwan abien no mu biara nni hɔ a eye sen biara wɔ amansan nyinaa mu. Ɔkwan a ɛteɛ no gyina panel kɛse, hann a wɔhwehwɛ, dodow a wɔyɛ, ɛka, nhwɛso no pɛpɛɛpɛ ne nneɛma a atwa yɛn ho ahyia tebea so.

So wobetumi ahyerɛn LGP biako afi ano biako?

Aane. Kanea a ɛwɔ ano biako betumi aba, nanso ɛsɛ sɛ ɔkwan a wɔfa so yi kanea no tua hann a ɛso atew wɔ ɔfã a ɛwɔ akyirikyiri no so ka.

So wobetumi ahyerɛn LGP bi afi ano anan?

Aane. Four-edge input betumi ama hann a ɛkorɔn ama panel akɛse nanso ɛhwehwɛ LED pii, tumi, wiring ne ɔhyew nhyehyɛe.

So acrylic LGP afã abien no nyinaa betumi ama hann aba?

Aane. Wobetumi ayɛ adan a ɛwɔ afã abien a ɛma mframa bɔne bere a reflector ne surface construction ma kwan ma hann fi anim abien no nyinaa mu ba no.

LED nsɛm bɛn na ɛho hia na wɔde ayɛ dot pattern no?

Fa LED mfonini, package kɛse, emitting sorokɔ, ɛnne, hann flux, beam angle, kɔla hyew, mprempren ne kwan a ɛda panel ano no ma.

Ɔkwan bɛn so na wɔsusuw LGP biakoyɛ?

Wɔde hann nsɛntitiriw a wɔapene so ne nsusuwii a wɔakyerɛkyerɛ mu te sɛ hann a ɛba fam a wɔakyekyɛ mu de hann a ɛsen biara anaa nea ɛsen biara na ɛsusuw pɛyɛ.

Dɛn nti na wotumi hu LED ahorow sɛ mmeae a ɛhyerɛn a ɛbɛn anoano?

LED mfonini ahorow a wotumi hu betumi afi LED ntam kwan a ɛboro so, afrafra kwan a ɛnnɔɔso, anoano a ɛnyɛ pɛpɛɛpɛ, nsensanee nsusuwii a ɛmfata anaasɛ ntrɛwmu a ɛnnɔɔso mu aba.

Dɛn nti na panel no fã a ɛwɔ akyirikyiri no yɛ sum?

Ebia ɔfã a ɛwɔ akyirikyiri no bɛyɛ sum bere a hann ne akwantu kwan no ware dodo anaasɛ ɔkwan a wɔfa so yiyi no yi hann pii a ɛbɛn LED ano no fi hɔ no.

So wobetumi de panel no adi dwuma wɔ abɔnten?

Abɔnten so dwumadie no yɛ yie berɛ a wɔagye PMMA grade, LED modules, printed pattern, reflector, diffuser, seal, frame ne ingress ahobanbɔ atom akyi nko ara.

Dɛn ne oprehyɛn-ɔhyew a ɛwɔ hɔ?

Adwumayɛbea a etwa to no gyina PMMA grade, LEDs, ink, adhesive, reflector, diffuser ne dan so. Ɛsɛ sɛ wɔsɔ nhyiam a edi mũ no hwɛ wɔ ɔhyew mu.

Acrylic kanea akwankyerɛ panel no di bere tenten ahe?

Ɔsom nkwa gyina LED hyew, adwumayɛ nnɔnhwerew, mprempren, PMMA grade, tintim nhwɛso, nsu, UV a ɛda adi ne kanea nhyiam a edi mũ.

So wobetumi de LGP no adi dwuma wɔ X-ray sini a wɔhwɛ mu?

Aane. Wobetumi de LGP ahorow a wɔayɛ no sɛnea wɔpɛ adi dwuma sɛ nneɛma a wɔde hwɛ ade wɔ X-ray sini ahwɛfo mu, a egyina hann a wɔhwehwɛ, biakoyɛ, kɔla hyew ne mfiri gyinapɛn ahorow so.

So acrylic LGP hwehwɛ sɛ wɔtrɛw mu?

Aane. PMMA trɛw na ɛtwetwe bere a ɔhyew ne nsu a ɛyɛ nwini no, enti panel akɛse hwehwɛ sɛ wɔma kwan a ɛfata sɛ wɔde besisi hɔ.

So wobetumi abɔ acrylic kanea akwankyerɛ panel bi?

PMMA panels a wɔapaw no betumi ayɛ ɔhyew bent, nanso bend nhyehyɛe no betumi aka flatness, emu nhyɛso ne optical uniformity na ɛsɛ sɛ wɔgye tom.

So PMMA ye sen PS ma hann akwankyerɛ mprɛte?

PMMA taa ma aniwa mu pefeeyɛ a emu yɛ den ne wim tebea adwumayɛ, bere a wobetumi apaw PS ama dan mu dwumadie a ne bo nyɛ den. Nneɛma a ɛteɛ no gyina optical, thermal, mechanical ne ɛka a wɔhwehwɛ so.

So ɛho hia sɛ wɔyɛ nhwɛsode ansa na wɔayɛ no pii?

Wɔkamfo prototype kyerɛ denneennen efisɛ optical adwumayɛ gyina LEDs ankasa, reflector, diffuser, frame ne anyinam ahoɔden nhyehyɛe so.

Fael bɛn na ɛho hia ma LGP ​​a wɔahyɛ da ayɛ?

Fa PDF, DXF, DWG, AI anaa STEP fael a wɔasusuw ho ka LED ne optical-performance ahwehwɛde ahorow ho ma.

Nsɛm bɛn na wɔhwehwɛ na wɔafa aka asɛm?

Fa panel no nsusuwii, ne kɛse, ne nsusuwii, LED data, hann-input anoano, reflector, diffuser, botae hyerɛn, biakoyɛ, dodow ne baabi a wɔrekɔ ma.

Nya Amanneɛbɔ Acrylic LGP Quote

Ɛfa HSQY Plastic Kuw ho

HSQY Plastic Kuw no de amanne kwan so acrylic hann akwankyerɛ panels, acrylic nkrataa, PVC nkrataa, PET nkrataa, PP nkrataa ne customized plastic afã horow ma amanaman ntam B2B adetɔfo.

HSQY boa wɔn a wɔyɛ kanea, nnwumakuw a wɔyɛ nsɛnkyerɛnne, wɔn a wɔyɛ nneɛma a wɔde kyerɛ, wɔn a wɔyɛ nnwinnade, wɔn a wɔde ba amannɔne ne wɔn a wɔkyekyɛ denam nneɛma a wɔpaw, mfonini, nhwɛsode, nneɛma a wɔayɛ, nhwehwɛmu ne nneɛma a wɔde kɔ amannɔne a wɔayɛ no sɛnea wɔpɛ so.

Bisa Quote ne Prototype