Acrylic Kekeli Mɔfiamegbalẽ si Wowɔ Ðe Ðoɖo Nu

Acrylic Kekeli Mɔfiame Panel Dɔwɔƒe si wowɔ ɖe ɖoɖo nu

HSQY wɔa acrylic kekeli ƒe mɔfianu siwo wowɔ ɖe ɖoɖo nu na LED-kaɖi siwo ƒe keklẽ le nugbɔ, boblododo ƒe akaɖiɖakawo, dzesi siwo me kekeli le, megbekaɖi siwo woɖena fiana, X-ray film kpɔlawo, dziɖuɖu ƒe akpawo, atsyɔ̃ɖoɖo ƒe akaɖiwo kple ŋkume ƒe kpekpe siwo wowɔ ɖe ɖoɖo nu.

Wowɔa kekeli ƒe mɔfianu ɖesiaɖe tso PMMA si ƒe nukpɔkpɔ deŋgɔ me eye wowɔe be wòama kekeli tso LED siwo wotu ɖe nugbɔ dzi le anyigba si dzi kekeli le la dzi.

Woate ŋu awɔ kekeli-ɖeɖe ƒe nɔnɔmewo to laser dotting, laser grid engraving, line engraving, UV tata alo screen tata le panel ƒe didime, LED ƒe nɔƒewo, kekeli-de nu goawo kple kekeli ƒe teƒe si hiã nu.

Woate ŋu awɔ titrime siwo wowɔ ɖe ɖoɖo nu tso abe 1mm va ɖo 10mm ene. Woate ŋu awɔ panels abe dzogoe ene me, dzogoe ene me, gotagome, ellipses, arcs, dzogoe etɔ̃, asigɛwo kple CNC-cut nɔnɔme siwo wowɔ ɖe ɖoɖo nu.

Nugbɔ ɖeka, nugbɔ eve kple nugbɔ ene ƒe kekeli ƒe nɔnɔmewo li. Woateŋu awɔ kekeli ƒe xɔtuɖoɖo siwo le akpa ɖeka alo akpa eve hã le kekeli ƒe keklẽ, kakaɖenu kple xɔ ƒe ɖoɖo nu.

Kekeli mamlɛtɔ, kekeli ƒe dɔwɔwɔ nyuie kple ɖekawɔwɔ nɔ te ɖe nukpɔkpɔ ƒe ɖoɖo bliboa dzi, si me LED ƒomevi, LED ƒe gbeɖiɖi, input-edge design, dot pattern, plate titrime, reflector, diffuser, edge finish, xɔ kple dzoxɔxɔ ƒe nɔnɔmewo hã le.

Bia LGP ​​ƒe Nyayɔyɔ    Bia be woawɔ LGP ƒe Kpɔɖeŋu

Acrylic Kekeli Mɔfiame Panel Video

Kpɔ video si le ete be nàto HSQY acrylic light guide panels kple akaɖi ƒe dɔwɔwɔ siwo do ƒome kplii me.

Acrylic LGP ƒe Adzɔnu ƒe Nɔnɔmetata si wowɔ ɖe ɖoɖo nu

Nukae Nye Acrylic Kekeli Mɔfiame Dɔwɔƒe?

Acrylic kekeli mɔfianu, si wogayɔna be LGP alo kekeli mɔfianu ƒe agbalẽvi, nye PMMA agbalẽvi si wotsɔa nukpɔkpɔ wɔe si wowɔ be wòatrɔ kekeli tso LED siwo wotu ɖe nugbɔ dzi wòazu nusi lolo wu si me kekeli le.

Kekeli toa go ɖeka alo esi wu nenema si wowɔ nyuie me gena ɖe eme eye wòtoa acrylic la me to ememe ƒe keklẽ me.

Dot siwo wotsɔ laser kpa, dometsotso siwo wota, grids, fliwo alo nukpɔkpɔ ƒe nusuewo doa kplamatse kekeli ƒe mɔ ememetɔ eye wofiaa kekeli ƒe akpa siwo dzi wokpɔna toa ʋuƒoa ƒe anyime.

Wotrɔa asi le dometsotso ƒe lolome, goglome, nɔnɔme kple dometsotso ŋu le agbalẽa dzi be woatsɔ axe fe ɖe didime si le tɔtrɔm tso LED dzɔtsoƒea gbɔ ta.

Zi geɖe la, kpekpe blibo si me kekeli le le nugbɔ ƒoa LGP ​​la nu ƒu kple ete ƒe keklẽŋusẽ, ŋgɔgbe kakaɖemɔ̃, LED-kaɖiwo, xɔtunu, dzoxɔxɔ-kaka ƒe akpawo kple elektrikŋusẽnamɔ̃ si sɔ.

Alesi Edge-Lit Light Guide Panel Dɔwɔnae

Acrylic Kekeli Mɔfiame Panel ƒe Nɔnɔmewo

Alesi Nàtia Acrylic LGP ƒe Titrime

Ele be woatia titrime le LED package ƒe kɔkɔme, panel ƒe didime, keklẽ si hiã, kpekpeme si ŋu woɖe mɔ ɖo, frame ƒe goglome si li kple mɔ̃ɖaŋu-kpekpeɖeŋu nɔnɔmewo nu.

Kekeli-Input Edge ƒe Ðoɖowo

Laser-Engraved vs. Ta Kekeli Mɔfiame Panels

Optical Dɔwɔwɔ ƒe Nudidiwo

Ele be woada ŋku ƒe dɔwɔwɔ kpɔ to kpɔɖeŋu blibo si me LED siwo wogblɔ, reflector, diffuser, xɔ kple elektrikŋusẽnamɔ̃ siwo wogblɔ la zazã me.

Nusiwo Kpɔa Ŋusẽ Ðe LGP ƒe Kekeli Kple Ðekawɔwɔ Ŋu

• Panel ƒe lolome: Kekeli ƒe mɔzɔzɔ didiwo bia be woaxe kpɔɖeŋu ƒe fexexe si sɔ pɛpɛpɛ wu.

• Panel ƒe titrime: Titrime kpɔa ŋusẽ ɖe LED coupling, kpekpeme, sesẽme kple optical mɔ dzi.

• LED ƒe gbeɖiɖi: Dometsotso gãwo ate ŋu ana ka siwo le keklẽm kple esiwo do viviti siwo woate ŋu akpɔ le nusiwo wotsɔ de eme ƒe nugbɔ gbɔ.

• LED package ƒe kɔkɔme: Ele be teƒe si woɖea ya le la nasɔ kple kekeli-mɔfianu ƒe nugbɔ.

• Edge polishing: Nugbɔ siwo le gbadzaa alo esiwo mesɔ o ate ŋu aɖe kekeli ƒe gege ɖe eme dzi akpɔtɔ eye wòana keklẽ si mesɔ o nado.

• Dot density: Zi geɖe la, dot density dzina ɖe edzi ne wole adzɔge tso LED dzɔtsoƒea gbɔ.

• Dot ƒe goglome kple lolome: Ne woɖee fũu akpa le LED-awo gbɔ ate ŋu ana teƒe siwo klẽna nadze eye wòaɖe keklẽ si le didiƒe ʋĩ dzi akpɔtɔ.

• Reflector ƒe nyonyome: Megbe ƒe akpa si me keklẽŋusẽ le ŋutɔ ɖea kekeli ƒe bu dzi kpɔtɔna.

• Diffuser tiatia: Diffuser si lolo wu ate ŋu ana nukpɔkpɔ ƒe ɖekawɔwɔ nanyo ɖe edzi gake ate ŋu aɖe keklẽ si woɖona ɖe amewo dzi akpɔtɔ.

• Frame ƒe nɔnɔme: Mɔ̃ ƒe nyaƒoɖeamenu, nugbɔ ƒe nutsyɔtsyɔ kple kekeɖenudɔwɔwɔ ƒe mɔxexe ate ŋu akpɔ ŋusẽ ɖe gbadzaƒe kple eƒe dodo dzi.

• LED ƒe dzoxɔxɔ: Dzoxɔxɔ si gbɔ eme ate ŋu ana LED-kaɖi ƒe asixɔxɔ naɖiɖi kabakaba eye wòakpɔ ŋusẽ ɖe amadede ƒe liƒo dzi.

Acrylic Kekeli Mɔfiamewo ƒe Dɔwɔwɔwo

• Boblododo ƒe akaɖiɖakawo: Aɖaka siwo me kekeli le tsɛwo kple asitsaƒewo ƒe boblododowo.

• LED panel akaɖiwo: Edge-lit asitsatsa, ɔfis kple atsyɔ̃ɖoɖo akaɖiwo.

• Dzesi siwo me kekeli le: Dzesi siwo dzi woato ado le eme, mɔfiadzesiwo, ʋu ƒe dzesiwo kple dzesi siwo ŋu woŋlɔ ŋkɔ ɖo.

• X-ray film kpɔlawo: Megbekaɖi si sɔ na filmkpɔkpɔ kple ŋkuléleɖenuŋumɔ̃wo.

• LCD kple nukpɔkpɔ ƒe megbekaɖiwo: Megbekaɖi si wowɔ ɖe ɖoɖo nu na screen kple haƒonu tiatia aɖewo.

• Dzɔdzɔmeŋusẽfianu: Abɔta siwo me kekeli le, dzesiwo, dɔwɔla ƒe ŋgɔdonyawo kple dɔwɔnuwo ƒe akpawo.

• Nudzraƒewo ƒe ɖeɖefiawo: Agbalẽdzraɖoƒe siwo me akaɖi le, nudzraɖoƒewo, nuɖuɖudzraɖoƒewo kple boblododonuwo.

• Atsyɔ̃ɖoɖo ƒe akaɖiwo: Xɔtuɖaŋu ƒe akaɖi ƒe nɔnɔme siwo le gota, siwo le goglo eye wowɔ wo ɖe ɖoɖo nu.

• Ʋuwo ƒe xɔmenuwo: Ʋu ƒe akpa siwo ŋu kekeli le, ʋɔtru ƒe agbalẽvi, dzesiwo kple nusiwo woɖena fiana.

• Dzodzro ƒe akaɖi: Mɔ̃-nukpɔkpɔ, AOI kple nukpɔkpɔ ƒe ŋkuléleɖenuŋu ƒe kekeli si zãa mɔ̃ɖaŋununya ƒe nukpɔkpɔ ƒe ɖoɖo.

LGP Nɔnɔmewo Kple Woƒewɔwɔ si wowɔ ɖe ɖoɖo nu

• Dzogoe ene me kple dzogoe ene me ʋuƒo.

• Kplɔ̃ siwo le gota kple esiwo le dzogoe ene me.

• Arc, ring kple curved profiles.

• Dzogoe etɔ̃ kple dzogoe geɖe ƒe akpa siwo le dzogoe ene me.

• Dekɔnu CNC-tso contours.

• Dowo, ʋuƒo, notches kple ka ƒe ʋuʋu.

• LED ƒe nyawo tsɔtsɔ de eme ƒe goawo si wokɔ.

• Atikewɔwɔ si me wobua tame le le go siwo menye nusiwo wotsɔ de eme o dzi.

• Laser-kpa dzesiwo, dzesiwo kple atsyɔ̃ɖoɖo ƒe nɔnɔmewo.

• Axa ɖeka alo akpa eve ƒe ametakpɔnu ƒe nutsyɔnu.

• Dzoxɔxɔ-bɔbɔ alo ƒokpli ƒe akpa siwo ŋu woate ŋu aɖo kpee le nukpɔkpɔ me.

Mɔfiame Siwo Ku Ðe Eɖoɖo Kple Dzoxɔxɔ Kekeɖenudɔ Ŋu

• Na mɔɖeɖe si sɔ na PMMA ƒe dzoxɔxɔ ƒe kekeɖenudɔwɔwɔ kple didime ƒe tɔtrɔ si do ƒome kple fafa.

• Mègabla xɔtunu gãwo sesĩe ale gbegbe be kekeɖenudɔa ana woabɔbɔ alo ana woƒe nugbɔ nate ɖe wo dzi o.

• Zã nusiwo wotsɔna léa nu ɖe ​​te siwo le tsia dzi alo do siwo ƒe lolome sɔ be woatsɔ aɖoe le afisi wòhiã le.

• Na LED ƒe dodo ƒe anyigba nasɔ kple LGP ƒe nyawo tsɔtsɔ yi eme ƒe nugbɔ si wowɔ nyuie.

• Ðe vovototo si le LED kple panel dome le nukpɔkpɔ me dzi kpɔtɔ esime nèle kekeɖenudɔa ƒe ʋuʋu ta.

• Ƒo asa na ke, asibidɛ ƒe dzesiwo, nusiwo wotsɔna léa nu ɖe ​​nu ŋu ƒe nugbagbevi siwo susɔ kple ƒoƒo ɖe nukpɔkpɔ ƒe anyigbawo dzi.

• Na dzoxɔxɔ si sɔ na LED strips kple modules.

• Xɔ mɔ na reflector kple diffuser layers be woagawɔ optical bonding alo pressure dzesi siwo womedi o.

• Zã edge-reflective tape alo frame treatment le non-input edges dzi le afisi wòhiã le.

• Do kpekpe bliboa kpɔ le subɔsubɔ ƒe dzoxɔxɔ si wokpɔ mɔ na si kɔkɔ wu kple esi bɔbɔ wu me.

Xɔmenuwo Kple Gbedoxɔ Me Dɔwɔwɔwo

Wotrɔ asi le LGP kpekpe siwo wowɔ ɖe ɖoɖo nu koŋ ŋu na xɔme akaɖi kple nukpɔkpɔ ƒe nɔnɔme siwo dzi wokpɔna negbe ɖe wogblɔ gotagome nudidiwo ko hafi.

Gbedoxɔ me dzedze nɔ te ɖe PMMA ƒe dzeside, LED modules, nɔnɔmetata si wota, reflector, diffuser, adhesive, frame, nutrenu kple elektrik enclosure.

Ele be gotagome dɔwo nade dzesi UV ƒe keklẽ, dzoxɔxɔ ƒe didime, fafa, tsidzadza, gege ɖe eme takpɔkpɔ ƒe nudidi, dɔwɔwɔ ƒe gaƒoƒo kple dɔwɔwɔ ƒe ɣeyiɣi si wokpɔ mɔ na.

Ne ɖoɖoa ƒe ɖoɖo bliboa, eƒe akpa aɖewo ƒe nɔnɔmewo, tsitsi kabakaba kple mɔɖegbalẽ ƒe ɖoɖowo do alɔe ko hafi wòle be woata subɔsubɔ ƒe agbenɔƒe ƒe nya si woɖo ɖi.

Atikewɔwɔ Kple Dzodzro ƒe Akaɖiwo ƒe Dɔwɔnawo

Woate ŋu azã acrylic kekeli ƒe mɔfianu ƒe akpawo abe nukpɔkpɔ ƒe akpawo ene le X-ray film kpɔlawo, ŋkuléleɖenuŋu ƒe akaɖiwo kple atikewɔnuwo ƒe megbekaɖi tiatia aɖewo me.

Atikewɔnu zazã le atikewɔnu me ate ŋu abia be woakpɔ keklẽ, ɖekawɔwɔ, amadede ƒe dzoxɔxɔ, flitete, elektrikŋusẽ ƒe dedienɔnɔ, dzadzɛnyenye ƒe tsitretsitsi kple alesi woate ŋu akplɔe ɖo dzi geɖe wu.

Kekeli ƒe mɔfianu alo nusiwo wotsɔ wɔe ƒe ɖaseɖigbalẽ meɖoa atikewɔnu bliboa ƒe ɖaseɖigbalẽ anyi le eɖokui si o.

LGP ƒe Nyonyome Dzikpɔkpɔ Dodokpɔ siwo Wokafu

• PMMA nu kple optical-grade ƒe kpeɖodzi.

• Panel ƒe titrime kple titrime ƒe mɔɖeɖe ɖe nu ŋu.

• Didime, kekeme, diagonal kple profile ƒe didimewo.

• Do, slot kple notch ƒe nɔƒe ƒe nyateƒetoto.

• Panel gbadzaa, dati kple warpage.

• Input-edge polishing kple anyigba ƒe ƒuƒuiƒe.

• Dot ƒe kpɔɖeŋu ƒe lolome, goglome, eƒe kpekpeme kple eƒe nɔƒe.

• Printed-dot ƒe adhesion kple eƒe dɔyɔyɔ.

• Anyigba ƒe ƒoƒo, ɖiƒoƒo, kuɖɔ kple teƒe yibɔwo.

• Kekeli si le mama dedie nu, suetɔ kekeake kple esi sɔ gbɔ wu.

• Kekeli ƒe ɖekawɔwɔ to dzidzenu si dzi wolɔ̃ ɖo zazã me.

• Amadede-dzoxɔxɔ kple amadede ƒe ɖekawɔwɔ.

• LED hotspot kple input-edge keklẽ-band ŋkuléle ɖe.

• Le didiƒe ʋĩ do viviti-nutowo me dzodzro.

• Kekeli ƒe sisi tso goawo kple megbe siwo womezã o gbɔ.

• Reflector kple diffuser ƒe nɔnɔme me dzodzro.

• Dzoxɔxɔ ƒe tsatsam kple didime-li ke dodokpɔ.

• Tsitsi le dzoxɔxɔ gã kple fafa gã me le afisi wòhiã le.

• UV tsitsi na gota dɔwɔwɔ.

• Ametakpɔnu-film, packing kple meliɖoɖo me dzodzro.

Nyatakaka Siwo Hiã Na LGP ​​Quote si Wowɔ Ðe Ðoɖo Nu

• Panel ƒe didime, kekeme, eƒe titrime kple eƒe nɔnɔme.

• Mɔ̃ɖaŋununya ƒe nɔnɔmetata kple didime ƒe mɔɖeɖe ɖe nu ŋu.

• Dowo, dowo, notchwo kple nugbɔ ƒe atikewɔwɔ siwo hiã.

• Kekeli si dona le akpa ɖeka alo akpa eve.

• Nugbɔ ɖeka, nugbɔ eve, nugbɔ etɔ̃ alo nugbɔ ene LED input.

• LED wɔla kple eƒe kpɔɖeŋu xexlẽdzesi.

• LED package dzidzeme kple emitting-anyigba ƒe kɔkɔme.

• LED ƒe gbeɖiɖi, agbɔsɔsɔme kple didime tso LGP ƒe nugbɔ.

• LED amadede dzoxɔxɔ, CRI, beam dzogoe kple kekeli ƒe sisi.

• LED voltage, fifia kple ŋusẽ.

• Reflector-film ƒe kpɔɖeŋu kple reflectance.

• Diffuser nu, titrime, kaka kple haze.

• Taɖodzinu le mama dedie nu ƒe keklẽ kple ɖekawɔwɔ.

• Dzidzenu si wobia kple lɔlɔ̃ ɖe edzi ƒe dzidzenu.

• Dɔwɔƒe si me wowɔa dɔ le le xɔ me alo gota.

• Yame ƒe dzoxɔxɔ suetɔ kple esi sɔ gbɔ wu.

• Subɔsubɔ ƒe agbenɔƒe si wobia kple gbesiagbe dɔwɔwɔ ƒe gaƒoƒo.

• Prototype agbɔsɔsɔme kple agbɔsɔsɔme si wowɔna le agbɔsɔsɔ gã me.

• Nubablɛ, teƒe si woayi kple ŋkeke si wobia be woatsɔe vɛ.

Ðo Wò LGP Nutata kple LED Nyatakakawo ɖa

Ðaseɖigbalẽwo Kple Dɔa ƒe Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye PMMA ƒe nuzazãwo ŋuti nyatakaka gbalẽviwo, didime me dzodzro ŋuti nyatakakawo, ŋkumekpɔkpɔ ƒe dodokpɔ ŋuti nyatakakawo, nusiwo ŋu seɖoƒe le ƒe nyatakakawo kple nyonyome-dzikpɔkpɔ ƒe ɖaseɖigbalẽwo.

Ele be optical dɔwɔwɔ ŋuti nyatakakawo nade dzesi panel ƒe didime, titrime, LED ƒe kpɔɖeŋu, LED fifia, input goawo, reflector, diffuser, dzidzenu didime kple dodokpɔ mɔnu.

Mele be woazã nusiwo wotsɔ wɔe ƒe ɖaseɖigbalẽ si wozãna le mɔ gbadza nu abe kpeɖodzi le kekeli ƒe akpa si woƒo ƒu bliboe ƒe keklẽ, ɖekawɔwɔ, agbenɔƒe alo gota dɔwɔwɔ ŋu o.

Nukatae Nàtia HSQY na Acrylic LGP siwo wowɔ ɖe ɖoɖo nu?

• Optical-grade PMMA kekeli mɔfiame ʋuƒo.

• Wotrɔ asi le woƒe titrime ŋu tso abe 1mm va ɖo 10mm ene.

• Nɔnɔme siwo le dzogoe ene me, siwo le gota, siwo le goglo eye womele ɖoɖo nu o.

• Laser-dot, laser-grid kple agbalẽtata-dot ƒe nɔnɔmewo.

• Nugbɔ ɖeka, nugbɔ eve, nugbɔ etɔ̃ kple nugbɔ ene ƒe kekeli-dede ƒe nɔnɔmewo.

• Akpa ɖeka kple akpa eve ƒe ya si dona le yame ƒe xɔtuɖoɖowo.

• CNC lãɖeɖe, tomekuku, mɔɖeɖe kple nugbɔ polishing.

• Kpɔɖeŋu ƒe wɔwɔme hafi woawɔe le agbɔsɔsɔ gã me.

• Nukpɔkpɔ dodokpɔ le dɔa ƒe nɔnɔme siwo dzi wolɔ̃ ɖo nu.

• Ametakpɔnu masking si wowɔ ɖe ɖoɖo nu kple nusiwo wotsɔ ɖoa ​​duta.

• Kpekpeɖeŋu na akaɖiwo, dzesiwo, nukpɔkpɔ kple dɔwɔnuwo wɔlawo.

Hafi woawɔe le agbɔsɔsɔ gã me la, HSQY kafui be woawɔ kpɔɖeŋu blibo aɖe ahadoe kpɔ to asisi la ƒe LED ŋutɔŋutɔwo, reflector, diffuser, frame kple elektrik ƒe ɖoɖowo zazã me.

Bia Custom LGP Kpɔɖeŋuwo kple Asixɔxɔ

Nya Siwo Wobiaa Enuenu Tso Acrylic Light Guide Panels Ŋu

Nukae nye acrylic-kaɖi ƒe mɔfianu si wowɔ ɖe ɖoɖo nu?

Enye PMMA-kplu si woate ŋu akpɔ kple ŋku si wowɔ be wòama kekeli si tso LED siwo wotu ɖe nugbɔ dzi la ɖe anyigba si lolo wu si dzi kekeli le dzi.

Aleke acrylic-kaɖi ƒe mɔfianu ƒe agbalẽvi wɔa dɔe?

Kekeli gena ɖe eme to ʋuƒo ƒe nugbɔ si wowɔ nyuie me, zɔa mɔ to PMMA la me eye woɖenɛ toa nukpɔkpɔ ƒe nɔnɔme siwo wotsɔ laser kpa, wota alo wotrɔ asi le wo ŋu me.

Vovototo kae le LGP kple diffuser plate dome?

LGP tsɔa nugbɔ kekeli heɖenɛ ɖa, esime diffuser plate kaka kekeli si dona eye wòkpena ɖe ame ŋu be dometsotso siwo wokpɔna, teƒe siwo dzoxɔxɔ le kple keklẽ ƒe vovototowo dzi naɖe akpɔtɔ.

Ðe LGP hiã na nusi naa nukpɔkpɔa?

Akpa ɖeka ƒe keklẽŋusẽ ƒe mɔ̃ akpa gãtɔ zãa megbe keklẽŋusẽ tsɔ trɔa kekeli si yia anyime yia anyigba si dzi kekeli le gbɔ eye wòɖea nukpɔkpɔ ƒe bu dzi kpɔtɔna.

Titrime kawoe li?

Acrylic LGP siwo wowɔ ɖe ɖoɖo nu la li le woƒe titrime tso abe 1mm va ɖo 10mm ene.

LGP ƒe titrime kae wòle be matia?

Ele be woatia titrime le LED package ƒe kɔkɔme, panel ƒe lolome, kekeli-mɔzɔzɔ ƒe didime, keklẽ si hiã, kpekpeme kple teƒe si woate ŋu aɖo nu.

Ðe woate ŋu atrɔ asi le panel la ƒe lolome ŋua?

Ɛ̃. Woate ŋu atrɔ asi le didime, kekeme, titrime, dowo, dowo, notches kple edge treatments ŋu le mɔ̃ɖaŋununya ƒe nɔnɔmetatawo nu.

Ðe woate ŋu awɔ acrylic LGP-wo le nɔnɔme siwo wowɔ ɖe ɖoɖo nu mea?

Ɛ̃. Woate ŋu awɔ gotagome, ellipses, arcs, dzogoe etɔ̃, rings kple CNC-cut nɔnɔme siwo mesɔ o.

Nukae nye laser-dot kekeli ƒe mɔfianu?

Enye PMMA-kpa si me wotsɔ kɔmpiuta dzi nu suesuesue siwo wotsɔ laser kpa siwo ɖea kekeli hemaae la le.

Nukae nye LGP si dzi woŋlɔ nu ɖo?

Ezãa UV-ta alo screen-printed reflective dots le PMMA ƒe anyigba dzi tsɔ ɖea kekeli tso panel la me.

Ðe laser-nuŋɔŋlɔ nyo wu dometsotso siwo wotaa?

Mɔnu eveawo dometɔ aɖeke menyo wu le xexeame katã o. Mɔnu nyuitɔ nɔ te ɖe panel ƒe lolome, keklẽ si hiã, ewɔwɔ ƒe agbɔsɔsɔ, gazazã, kpɔɖeŋu ƒe pɛpɛpɛ kple nutome ƒe nɔnɔmewo dzi.

Ðe woate ŋu aklẽ LGP ɖeka tso go ɖeka dzia?

Ɛ̃. Woate ŋu atsɔ akaɖi si le go ɖeka dzi, gake ele be alesi woɖea akaɖia le la naxe kekeli si dzi ɖe kpɔtɔ le akpa si le didiƒe ʋĩ la teƒe.

Ðe woate ŋu aklẽ LGP tso go enea?

Ɛ̃. Ene-edge input ateŋu ana kekeli si lolo wu na panels gãwo gake ebia LED geɖe, ŋusẽ, ka kple dzoxɔxɔ dzikpɔkpɔ.

Ðe acrylic LGP ƒe akpa eveawo ate ŋu ana kekeli nadoa?

Ɛ̃. Woate ŋu awɔ xɔtunu siwo me woɖea ya le le axa eve me ne kekeli ƒe keklẽ kple anyigba ƒe xɔtutu ɖe mɔ be kekeli nado tso mo eveawo me.

LED nyatakaka kawoe hiã be woatsɔ awɔ dot ƒe nɔnɔme?

Na LED ƒe kpɔɖeŋu, agbalẽvi ƒe lolome, emitting kɔkɔme, gbeɖiɖi, kekeli ƒe sisi, keklẽ ƒe dzogoe, amadede ƒe dzoxɔxɔ, fifia kple didime tso panel ƒe nugbɔ.

Aleke wodzidzea LGP ​​ƒe ɖekawɔwɔe?

Wozãa kekeli ƒe teƒewo ƒe ƒuƒoƒo si dzi wolɔ̃ ɖo kple mɔfiame si woɖe fia abe keklẽ suetɔ kekeake si woma ɖe keklẽ si le mama dedie nu alo esi sɔ gbɔ wu ene tsɔ dzidzea ɖekawɔwɔ.

Nukatae wokpɔa LED-wo abe teƒe siwo klẽna le nugbɔa gbɔ ene?

LED nɔnɔmetata siwo wokpɔna ate ŋu atso LED ƒe dometsotso si gbɔ eme, tsakatsaka ƒe didime si mesɔ o, nugbɔ ƒe ɖoɖowɔwɔ nyuie o, dometsotso ƒe nɔnɔme si mesɔ o alo kaka si mesɔ o gbɔ.

Nukatae ʋuƒoa ƒe akpa si le didiƒe ʋĩ la do viviti wu?

Akpa si le didiƒe ate ŋu ado viviti wu ne kekeli kple mɔzɔzɔ ƒe didime didi akpa alo eɖeɖe ƒe ɖoɖoa ɖe kekeli geɖe ɖa le LED ƒe go gbɔ.

Ðe woate ŋu azã panel la le gotaa?

Ne woda asi ɖe PMMA ƒe dzeside, LED modules, nɔnɔmetata si wota, reflector, diffuser, seal, frame kple ingress protection dzi ko hafi woate ŋu azãe le gota.

Nukae nye dɔwɔwɔ ƒe dzoxɔxɔ ƒe didime?

Dɔwɔwɔ ƒe didime mamlɛtɔ nɔ te ɖe PMMA ƒe dzeside, LEDs, ink, adhesive, reflector, diffuser kple xɔ dzi. Ele be woado kpekpe bliboa kpɔ le dzoxɔxɔ gome.

Ɣeyiɣi didi kae acrylic-kaɖi ƒe mɔfianu xɔna?

Subɔsubɔ ƒe agbenɔƒe nɔ te ɖe LED ƒe dzoxɔxɔ, dɔwɔwɔ gaƒoƒo, fifia, PMMA ƒe dzeside, tata ƒe nɔnɔme, tsidzadza, UV ƒe ɖeɖefia kple akaɖi ƒe kpekpe bliboa dzi.

Ðe woate ŋu azã LGP la le X-ray sinimakpɔmɔ̃ mea?

Ɛ̃. Woate ŋu azã LGP siwo wowɔ ɖe ɖoɖo nu abe nukpɔkpɔ ƒe akpawo ene le X-ray film kpɔlawo me, le keklẽ, ɖekawɔwɔ, amadede ƒe dzoxɔxɔ kple mɔ̃a ƒe dzidzenu siwo hiã nu.

Ðe acrylic LGP hiã kekeɖenudɔwɔwɔ ƒe mɔɖeɖea?

Ɛ̃. PMMA kekena ɖe enu eye wòtsina ɖe enu ne dzoxɔxɔ kple fafa le eme, eyata xɔtunu gãwo hiã na mɔ si sɔ na wo ɖoɖo ɖe wo ɖoɖo ŋu.

Ðe woate ŋu abɔbɔ acrylic-kaɖi ƒe mɔfianu ƒe akpa aɖea?

Woateŋu atsɔ dzoxɔxɔ abɔbɔ PMMA-kpa tiatia aɖewo, gake wobɔbɔ ƒe ɖoɖoa ateŋu akpɔ ŋusẽ ɖe gbadzaƒe, ememe nuteɖeamedzi kple nukpɔkpɔ ƒe ɖekawɔwɔ dzi eye ele be woaɖo kpe edzi.

Ðe PMMA nyo wu PS na kekeli ƒe mɔfianu gbadzɛwoa?

Zi geɖe la, PMMA naa nukpɔkpɔ me kɔ nyuie kple yame ƒe nɔnɔme ƒe dɔwɔwɔ sesẽ, esime woate ŋu atia PS na xɔme dɔwɔwɔ siwo ƒe asi bɔbɔ. Nusi sɔ la nɔ te ɖe nukpɔkpɔ, dzoxɔxɔ, mɔ̃ɖaŋu kple gazazã ƒe nudidiwo dzi.

Ðe wòhiã be woawɔ kpɔɖeŋu hafi woawɔe le agbɔsɔsɔ gã mea?

Wokafu kpɔɖeŋu vevie elabena nukpɔkpɔ ƒe dɔwɔwɔ nɔ te ɖe LED ŋutɔŋutɔwo, reflector, diffuser, frame kple elektrik ƒe ɖoɖowo dzi.

Fail kawoe hiã na LGP ​​si wowɔ ɖe ɖoɖo nu?

Na PDF, DXF, DWG, AI alo STEP faɛl si ƒe lolome le ɖekae kple LED kple optical-performance ƒe nudidiwo.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na panel ƒe didime, titrime, nɔnɔme, LED nyatakakawo, kekeli-de nu goawo, reflector, diffuser, taɖodzinu ƒe keklẽ, ɖekawɔwɔ, agbɔsɔsɔme kple yiyi.

Na Acrylic LGP Quote si wowɔ ɖe ɖoɖo nu

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa custom acrylic kekeli mɔfiame panels, acrylic agbalẽwo, PVC agbalẽwo, PET agbalẽwo, PP agbalẽwo kple customized plastic akpawo na dukɔwo dome B2B asisiwo.

HSQY doa alɔ akaɖiwɔlawo, dzesi dɔwɔƒewo, ɖeɖefia wɔlawo, dɔwɔnuwo wɔlawo, nusiwo wotsɔ tso duta vɛ kple wo mamalawo kple nusiwo wotsɔ tia, nutatawo, kpɔɖeŋuwo, ewɔwɔ si wowɔ ɖe ɖoɖo nu, ŋkuléle ɖe nu ŋu kple nusiwo wotsɔ ɖoa ​​duta ƒe bablawo.

Bia Nya Siwo Woyɔ Kple Kpɔɖeŋu