Super Kɔkɔ 1mm PVC sesẽ Plastik agbalẽ xatsaxatsa Na Thermoforming.

Super Kɔkɔ 1mm Sesẽ PVC agbalẽ xatsaxatsa na Thermoforming

HSQY wɔa super-kɔ 1mm sesẽ PVC agbalẽ xatsaxatsawo na thermoforming, vacuum wɔwɔ, blister babla, clamshells, trays, asitsaƒewo ɖeɖefia babla, atikewɔwɔ-mɔ̃ trays kple dɔwɔƒewo wɔwɔ akpawo.

Nusi woɖe fia la ƒe titrime le ŋkɔ me nye 1mm. PVC gbadzɛ siwo wowɔ ɖe ɖoɖo nu la li le woƒe titrime tso abe 0.15mm va ɖo 5mm ene, le kekeme si hiã, agbalẽ xatsaxatsa ƒe nɔnɔme, agbalẽ ƒe nɔnɔme kple wo zazã nu.

PVC sesẽ si me kɔ naa nukpɔkpɔ me kɔ nyuie, didime ƒe liƒo kple wɔwɔme ƒe dɔwɔwɔ na nubablɛwo kple dɔwɔƒewo ƒe tɔtrɔ. Ele be woatsɔ ewɔwɔ ƒe kpɔɖeŋu si dzi woda asi ɖo atsɔ aɖo kpe kekeli ƒe kaka, aŋɔ, amadede kple anyigba ƒe nyonyome dzi pɛpɛpɛ.

Dɔwɔwɔ tɔxɛ ƒe atikewo li na dzoxɔxɔ ƒe wɔwɔme bliboa, nuɖuɖu-kadodo ƒe bablawo, atike-mɔ̃wo ƒe agbawo, atikewo ƒe bablawo, agbalẽtata, aɖaka siwo wobla, antistatic dɔwɔwɔwo kple UV-si li ke.

Nuɖuɖu, atikewo kple atikewɔwɔ ƒe dɔwɔwɔwo bia be woaŋlɔ nu tɔxɛwo kple sedziwɔwɔ ŋuti nuŋlɔɖi siwo sɔ. Ðetugbui leaƒe ƒe aŋɔ si le eme ɖeɖe meɖoa kpe edzi be esɔ na nuwuwu zazã si ŋu wowɔ ɖoɖo ɖo o.

Ne èdi nyatakaka bubuwo la, kpɔ... HSQY transparent PVC blister agbalẽ ƒe didime, atikewo ƒe PVC filmwo kple PET thermoforming agbalẽwo.

Bia 1mm PVC Sheet ƒe Asixɔxɔ    Bia be Woawɔ Kpɔɖeŋuwo

Rigid PVC Dzoxɔxɔ ƒe Agbalẽvi Video

Kpɔ video si le ete be nàsrɔ̃ nu geɖe tso HSQY rigid PVC sheet rolls, ewɔwɔ ƒe nɔnɔmewo, wɔwɔme ƒe dɔwɔwɔwo kple customized specifications ŋu.

Nukae Nye 1mm Rigid PVC Thermoforming Sheet?

1mm rigid PVC thermoforming sheet nye polyvinyl chloride nusi me kɔ alo amadede le si wowɔ be wòafa le dzoxɔxɔ si dzi wokpɔ ŋusẽ ɖo me eye wòawɔ ɖe aŋɔ dzi to vacuum, nyaƒoɖeamenu alo mɔ̃ɖaŋununya ƒe kpekpeɖeŋu zazã me.

Ne wowɔe hefae vɔ la, nusi wotsɔ wɔe la léa nɔnɔme si wowɔ la me ɖe asi eye woate ŋu atsoe, aƒoe, atae, aƒoe, atre enu alo aƒoe nu ƒu ɖe agba alo akpa si wowɔ vɔ la me.

Le 1mm ƒe titrime me la, agbalẽa naa sesẽme kple ŋusẽkpɔɖeamedzi takpɔkpɔ geɖe wu atikewo ƒe ʋuʋudedi film tsɛwo eye wòsɔ nyuie wu na tray siwo goglo wu, ʋuʋudedi gãwo, ametakpɔnu ƒe gowo kple dɔwɔƒewo ƒe akpa siwo wowɔ.

Woɖɔ nusi wotsɔ wɔe hã be enye PVC film sesẽ si me kɔ, vinyl agbalẽ xatsaxatsa sesẽ, PVC vacuum-wɔwɔ agbalẽ, ʋuʋudedi gbadzɛ si me kɔ kple PVC thermoforming agbalẽ xatsaxatsa.

Super Clear PVC Sheet Nɔnɔmetatawo

1mm Rigid PVC Agbalẽvi ƒe Nɔnɔmewo

Ele be nɔnɔme mamlɛtɔ nade dzesi titrime ƒe mɔɖeɖe, kekeme ƒe mɔɖeɖe, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe didime, agbalẽ xatsaxatsa ƒe kpekpeme, gota ƒe didime, ʋuʋudedi ƒe mɔfiame, anyigba, amadede, nukpɔkpɔ ƒe nyonyome kple dɔwɔwɔ ƒe grade.

Optical Quality of Super Kɔkɔ PVC Agbalẽvi

Nya si nye super clear ɖɔa dzesi si me kɔ nyuie le nukpɔkpɔ me, gake ele be eŋutinunyala ƒe nuƒle ŋuti nyatakakawo nazã nukpɔkpɔ kple nusiwo gblẽ ƒe dzidzenu siwo woate ŋu adzidze.

Dzoxɔxɔ ƒe Dɔwɔwɔ

Dzoxɔxɔ si Wowɔ Ðekae

Eƒe titrime kple eƒe wɔwɔme si nɔa anyi ɖaa kpena ɖe agbalẽa ŋu wòxɔa dzo sɔsɔe le teƒe si wowɔe le eye wòɖea teƒea ƒe kekeme si gbɔ eme dzi kpɔtɔna.

Fesre si Wowɔna

Dzoxɔxɔ si wowɔna kple dzoxɔxɔ ƒe ɣeyiɣi nɔ te ɖe PVC ƒe wɔwɔme tututu, eƒe titrime, dzoxɔxɔnamɔ̃ ƒe ƒomevi, mɔ̃a ƒe duƒuƒu, aŋɔ ƒe nɔnɔme kple yame ƒe nɔnɔmewo dzi.

Sheet Sag ƒe agbalẽ

Sag si dzi wokpɔna le vevie na nuwo mama ɣesiaɣi. Ne gliwo ƒu kplakplakpla akpa ate ŋu ana gliwo nagasɔ o, evɔ dzoxɔxɔ si mesɔ gbɔ o ate ŋu ana gliwo nagawɔ blibo o alo ate ɖeɖi wo ŋu.

Deep-Draw Dɔwɔwɔ

Do goglowo kple dzogoe ɖaɖɛwo ate ŋu abia be woakpe ɖe plug ŋu, woawɔ nyaƒoɖeamenu, aŋɔ ƒe didime si sɔ nyuie wu kple atike si wotsɔ ɖe adzɔgbe si kpɔa ŋusẽ ɖe ame dzi ŋutɔ.

Mold Release kple Denesting

Anyigba ƒe glidzaglidza, aŋɔ ƒe ʋuʋu ƒe dzogoe, eƒe nɔnɔme kple eƒe ƒuƒoƒo ƒe nɔnɔme kpɔa ŋusẽ ɖe nenye be akpa siwo wowɔ la doa go tso aŋɔa me eye womana nyuie le wo babla me.

Trimming kple Punching

Ele be woatso agbalẽ si wowɔ la nyuie evɔ womagagbã le mɔ si dzi womeɖu o, ʋuʋudedi si gbɔ eme alo eƒe gowo ƒe ɣie o.

1mm PVC Sheet Dɔwɔwɔwo

• Asitsaƒewo ƒe ʋuʋudedi: Dɔwɔnuwo, elektrɔnikmɔ̃wo, agbalẽŋlɔnuwo, xɔtunuwo, fefenuwo, atsyɔ̃ɖonuwo kple nuƒlelawo.

• Clamshell packaging: Asitsaƒe ƒe agba siwo me kɔ siwo wotsɔ hinged alo eve siwo kpɔa ame ta.

• Thermoformed trays: Dɔwɔƒewo ƒe akpawo, akpawo, kpɔɖeŋuwo kple nusiwo hiã takpɔkpɔ sesẽ.

• Nuɖuɖu ƒe bablawo: Trak kple nugoe siwo wowɔ tso nuɖuɖu ƒe kadodo ƒe hatsotso si dzi woda asi ɖo ɖe vovo me.

• Atikewɔnuwo ƒe babla: Dɔwɔnuwo ƒe agbawo kple ametakpɔnu siwo zãa atikewɔnuwo ƒe babla siwo ŋu woda asi ɖo.

• Nusiwo woɖena fiana: Nutsyɔnu siwo wotsɔ aŋe wɔe siwo me kɔ, boblododo ɖeɖefiawo kple ametakpɔnu siwo wotsɔ kpɔa wo ta.

• Agbalẽtata kple wo babla: Aɖaka siwo me kɔ, fesrewo, nutsyɔnuwo kple akpa siwo wota to agbalẽtata ƒe dzesi si sɔ zazã me.

Gbãtɔ, Nuɖuɖu, Atikewɔwɔ kple Atikewɔwɔ PVC Dzesidewo

Standard PVC kple High-Barrier PVC xɔtuɖoɖowo

Ne èdi atikewɔmɔnu siwo me mɔxenu gãwo le la, kpɔ... HSQY PVDC-si wofa PVC film ƒe hatsotso.

PVC vs. PET, PETG kple HIPS na Thermoforming

PVC Dzoxɔxɔ ƒe Dzeside tɔxɛwo

Mele be woaɖɔ PVC si me kɔ si wozãna ɖaa le eɖokui si be etsia tsitrenu, si te ŋu nɔa te ɖe UV nu tegbee alo esi me dzo mate ŋu age ɖo o.

Nuɖuɖu-Kadodo ƒe Nudidiwo

Ele be PVC-gbadzɛ sesẽ si woɖo be woatsɔ abla nuɖuɖui nazã atike si sɔ na asi si me woayi kple nɔnɔme siwo woɖo be woatsɔ aƒo nuɖuɖui.

Ele be nuƒlela nade dzesi nuɖuɖu ƒe ƒomevi, dzoxɔxɔ si woatsɔ aƒoe, ɣeyiɣi didi si wòatsɔ aƒoe, nudzraɖoƒe alo nudzraɖoƒe kple nenye be nuɖuɖu si me ami le, aɖi, aha sesẽ alo tsi aƒoe.

Nuŋlɔɖi siwo hiã ate ŋu anye nuɖuɖu ƒe kadodo ŋuti nyatakaka, ʋuʋu dodokpɔ ŋuti nyatakaka, aŋɔ ƒe nyatakaka kple atike siwo ŋu seɖoƒe le ƒe nuŋlɔɖi.

Ele be woaɖe SGS ƒe nyatakaka aɖe me le dodokpɔ siwo tututu wowɔ nu eye mele be woatsɔe afia abe xexeame katã ƒe nuɖuɖu ƒe dedienɔnɔ ŋuti ɖaseɖigbalẽ ene o.

Atikewɔwɔ-Mɔ̃wo ƒe Nubabla ƒe Nudidiwo

Atikewɔnuwo ƒe bablawo bia nu geɖe wu dzedzeme si me kɔ kple dzoxɔxɔ ƒe nɔnɔme ko.

Ele be woada nusi wotsɔ wɔe kple agba si wowɔ la kpɔ abe nubablɛ bliboa ƒe akpa aɖe ene, si me nutsyɔnu ƒe nutsyɔnu, nutrenu ƒe ŋusẽ, agbaa ƒe blibonyenye, dɔlékuiwutike ƒe mɔnu, ʋuɖoɖo kple eƒe agbenɔƒe le.

Ethylene oxide, gamma, electron-beam kple plasma sterilization ateŋu akpɔ ŋusẽ ɖe PVC ƒe wɔwɔme vovovowo dzi le mɔ vovovowo nu. Ele be woaɖo kpe edzi be wosɔ ɖe wo nɔewo nu le dzeside kple agbɔsɔsɔme si tututu woazã ŋu.

Asisi la ƒe agbanɔamedzi gakpɔtɔ nye be wòada asi ɖe mɔxenu mamlɛtɔ si me dɔlékui mele o kple atikewɔnuwo ƒe babla ƒe ɖoɖo mamlɛtɔ dzi.

Dodokpɔ Siwo Wokafu be Woatsɔ Akpɔ Dzedzeme Dzi

• PVC resin, additive kple atikewɔwɔ ƒe kpeɖodzi.

• Titrime kple transverse titrime profile.

• Roll ƒe kekeme, agbalẽ ƒe didime kple diagonal tolerance.

• Roll ƒe didime, net weight, core diameter kple gota diameter.

• Mɔfiame si le tsatsam, ʋuʋudedi ƒe teteɖeanyi kple didiƒekpɔmɔ̃.

• Kekeli ƒe kaka, afu, eme kɔ, amadede kple keklẽ.

• Teƒe yibɔwo, tɔmelãwo ƒe ŋkuwo, gelwo, kuɖɔwo kple sisi ƒe dzesiwo.

• Anyigba ƒe ʋuʋudedi, ɖiƒoƒo kple nugbɔ ƒe gbegblẽ.

• Tensile ŋusẽ, didime, sesẽ kple ŋusẽkpɔɖeamedzi dɔwɔwɔ.

• Dzoxɔxɔ ƒe ʋuʋu le didiƒe kple esi le tsia dzi.

• Thermoforming fesre, agbalẽ sag kple dzoxɔxɔ ɖekawɔwɔ.

• He goglome kple gli-titrime mama si wowɔ.

• Mold ƒe dodo kple formed-part denesting.

• Punching, trimming kple nugbɔ ƒe nyonyome.

• Agbalẽtata, welding kple nutrenu ƒe sɔsɔ le afisi wòhiã le.

• Antistatic, UV alo dzo dodokpɔ hena dzesi tɔxɛwo.

• Nuɖuɖu-kadodo, atike alo atikewɔwɔ ŋuti nuŋlɔɖiwo me toto.

• Packing, pallet kple nugoe-agbawo me dzodzro.

Trɔ asi le Rigid PVC Thermoforming Tiatiawɔblɔɖe

• Featured 1mm sesẽ PVC agbalẽ.

• Wotrɔ asi le woƒe titrime ŋu tso abe 0.15mm va ɖo 5mm ene.

• Master rolls, slit rolls, agbalẽ gbadzawo kple kakɛ siwo wotso.

• Wotrɔ asi le agbalẽ xatsaxatsa ƒe kekeme, agbalẽ xatsaxatsa ƒe didime kple agbalẽ xatsaxatsa ƒe kpekpeme ŋu.

• Trɔ asi le pepa-nu vevi diameter kple winding mɔfiame.

• Super eme kɔ, kekeli-blɔ kɔ, ɣi, opaque kple dekɔnu amadedewo.

• Glossy, matte, frosted kple embossed anyigbawo.

• General vacuum-wɔwɔ kple deep-draw dzesiwo.

• Nuɖuɖu-kadodo kple atikewo ƒe babla ƒe dzesiwo.

• Atikewɔwɔ-mɔ̃wo ƒe tray ƒe dzesiwo.

• Antistatic, UV-stabilized kple dzo-siwo me dzo mele o ƒe dzesiwo.

• Slitting, sheeting, ametakpɔ film kple customized export packing.

Nyatakaka Siwo Hiã Na PVC Sheet Quote

• Wobia be wòanye titrime kple mɔɖeɖe ɖe nu ŋu.

• Agbalẽxatsaxatsa ƒe kekeme alo agbalẽa ƒe didime siwo hiã.

• Roll, agbalẽ alo lãɖeɖe-nuzazã ƒe nɔnɔme.

• Roll ƒe didime, roll ƒe kpekpeme kple pepa-core ƒe didime.

• Amadede si me kɔ, si ƒe amadede nye blɔ, si me mekɔ o alo esi wowɔ ɖe ɖoɖo nu.

• Glossy, matte, frosted alo embossed anyigba.

• Kekeli ƒe kaka, ahomya kple nukpɔkpɔ ƒe gbɔdzɔgbɔdzɔ ƒe seɖoƒe siwo hiã.

• Nusi wowɔ vɔ kple nuwɔwɔ ƒe goglome.

• Thermoforming-mɔ̃ ƒomevi kple dzoxɔxɔ mɔnu.

• Aŋɔ ƒe didime, ya ƒe dzogoewo kple do ƒe goglome.

• Wobia be woawɔ ŋusẽkpɔɖeamedzi, sesẽme kple shrinkage ƒe dɔwɔwɔ.

• Agbalẽtata, welding, dzoxɔxɔ nutrenu alo lamination ɖoɖo.

• Nuɖuɖu, atikewo, atikewɔwɔ alo dɔwɔƒewo zazã.

• Antistatic, dzo alo UV ƒe nɔnɔme siwo hiã.

• Asi si me woayi kple nuŋlɔɖi siwo hiã.

• Agbɔsɔsɔ gbãtɔ kple ƒe sia ƒe ƒe didi si wobu.

• Nubablɛ, melidzeƒe si woɖo tae kple ŋkeke si dzi woatsɔe vɛ.

Ðo Wò PVC Thermoforming Nudidiwo ɖa

Nubablɛwo Kple Wo Ðoɖoɖa

Kpɔɖeŋuwo babla: Woate ŋu abla A4 agbalẽwo kple kpɔɖeŋu siwo wotso ɖe ametakpɔkotokuwo kple agbalẽɖoɖoɖaɖakawo me.

Roll packing: Nufiame roll kpekpeme anɔ abe 50kg, kple roll kpekpeme siwo wowɔ ɖe ɖoɖo nu li le titrime, kekeme kple dɔwɔnuwo nu.

Roll takpɔkpɔ: Woate ŋu abla agbalẽ xatsaxatsawo kple PE film, kraft paper, tsi si me tsi mele o film kple nugbɔ takpɔkpɔ.

Sheet packing: Woateŋu abla flat sheets ɖe PE kotokuwo, kraft paper kple rigid export pallets me.

Pallet packing: Nufiame pallet kpekpeme anɔ abe 500-2000kg le nusi wowɔ ƒe nɔnɔme kple seɖoƒewo nu.

Agbatsɔtsɔ le nugoe me: Agba si wotsɔ ɖoa ​​nu me la ade tɔn 20, le agbalẽ xatsaxatsa ƒe didime, pallet ƒe nɔnɔme, nugoe ƒe lolome kple mɔxexe ɖe kpekpeme nu le se nu nu.

Ɣeyiɣi si woatsɔ awɔe: Zi geɖe la, ewɔwɔ si sɔ la bia abe ŋkeke 7-15 ene le eƒe nɔnɔme, kpɔɖeŋu, babla kple deposit ƒe kpeɖodzi megbe.

PVC Dedienɔnɔ Ŋuti Nyatakakagbalẽvi

Wodzra PVC ƒe dedienɔnɔ ŋuti nyatakaka gbalẽvi si li fifia ɖo ɖe ete be woate ŋu akpɔe.

Hafi nàzã agbalẽa hena nuƒle, agbalẽdzikpɔkpɔ alo ɖoɖowɔwɔ ɖe eŋu la, ɖo kpe edzi be dɔwɔƒea ƒe ŋkɔ, nusi wowɔ ƒe nɔnɔme, eƒe wɔwɔme, eƒe titrime, kekeme, nusiwo wotsɔ kpe ɖe eŋu kple ŋkeke si dzi woɖee ɖe go la sɔ kple nusi tututu wotsɔ na wò.

Wɔ PVC MSDS si Li Fifia ƒe kɔpi

Ðaseɖigbalẽwo Kple Dodokpɔ Ŋuti Nuŋlɔɖiwo

Nuŋlɔɖi siwo li ate ŋu anye adzɔnuwo ŋuti nyatakakawo, dedienɔnɔ ŋuti nyatakakawo, nunɔamesi ŋutɔŋutɔwo ŋuti nyatakakawo, atike siwo ŋu seɖoƒe le ŋuti nyatakakawo, nuɖuɖu ƒe kadodo ŋuti nyatakakawo kple woƒe nyonyome dzikpɔkpɔ ŋuti ɖaseɖigbalẽwo.

Ele be woaɖo kpe nuŋlɔɖi ɖesiaɖe dzi le PVC ƒe hatsotso si tututu wowɔ, eƒe wɔwɔme, amadede, eƒe titrime, afisi wowɔe le kple alesi wozãe nu.

Ele be woalé ŋku ɖe ɖaseɖigbalẽa tɔ, tata si wozãna ɖaa, afisi wòakeke ɖo kple ɣeyiɣi si wòawɔ dɔ le dɔdzikpɔkpɔ-ɖoɖo ƒe ɖaseɖigbalẽ ɖesiaɖe ŋu hafi woatae.

HSQY Xexeame Katã ƒe Nukpɔkpɔwo

Nukatae Nàtia HSQY abe Wò Rigid PVC Sheet Dɔwɔƒe ene?

• Featured 1mm super-kɔkɔ sesẽ PVC agbalẽ.

• Roll, sheet kple cut-to-lolome nuzazã ƒe nɔnɔmewo.

• Wotrɔ asi le woƒe titrime, kekeme, amadedewo kple anyigbadzinuwo ŋu.

• Vacuum-wɔwɔ kple goglo-he nu tiatia.

• Nuɖuɖu, atikewɔwɔ, atikewɔnyawo kple dɔwɔƒewo ƒe dzesiwo.

• Nukpɔkpɔ kple ŋutilã ƒe nyonyome-dzikpɔkpɔ ƒe kpekpeɖeŋu.

• Kpɔɖeŋuwo na wɔwɔme, lãɖeɖe, agbalẽtata kple nutrenu dodokpɔwo.

• Dekɔnu agbalẽ xatsaxatsa kpekpeme, nu vevi ƒe didime kple winding mɔfiame.

• Ametakpɔnu babla, pallets kple dukɔwo dome meliɖoɖo.

• Mɔ̃ɖaŋu-nuŋlɔɖi ƒe kpekpeɖeŋu si wotu ɖe dzesi si wotia dzi.

Hafi woawɔ nu geɖe la, HSQY kafui be woado PVC agbalẽ si wotia la kpɔ le asisi la ƒe dzoxɔxɔ ƒe mɔ̃ ŋutɔŋutɔ, aŋɔ, lãɖeɖe ƒe ɖoɖo kple nubablɛ ƒe fli si wowu enu la dzi.

Nya Siwo Wobia Enuenu Ku Ðe 1mm Rigid PVC Sheets Ŋu

Nukae wozãna na PVC gbadzɛ si ƒe didime nye 1mm?

Wozãnɛ na dzoxɔxɔ ƒe agbawo, ʋuʋudedi gãwo, clamshells, ametakpɔnu siwo me kɔ, asitsaƒewo ƒe agbawo, ɖeɖefia ƒe akpawo kple dɔwɔƒewo ƒe akpa siwo wowɔ.

Ðe nusi woɖe fia la ƒe titrime nye 1mm pɛpɛpɛa?

Ɛ̃. Nusi woɖe fia ƒe nɔnɔme nye 1mm, esime woate ŋu atrɔ asi le titrime bubuwo ŋu.

Ðe woate ŋu ana PVC sesẽ si ƒe didime nye 1mm le agbalẽ xatsaxatsawo mea?

Ẽ, le kekeme si wobia, agbalẽ xatsaxatsa ƒe didime, nu vevi ƒe lolome, agbalẽ xatsaxatsa ƒe kpekpeme kple xaxa ƒe nɔnɔmewo nu. 1mm ƒe nusiwo keke alo kpekpe ŋutɔ ate ŋu asɔ wu abe agbalẽwo ene.

Agbalẽxatsaxatsa ƒe kekeme kawoe li?

Woate ŋu awɔ agbalẽ xatsaxatsa ƒe kekeme siwo wowɔ ɖe ɖoɖo nu vaseɖe abe 1280mm ene, le eƒe titrime kple ewɔwɔ ƒe dɔwɔnuwo nu.

Nukae PVC si me kɔ ŋutɔ fia?

Efia dzeside si wokpɔna le nukpɔkpɔ me si me kɔ ŋutɔ. Ele be woaɖe nudidi siwo sɔ pɛpɛpɛ gɔme to kekeli ƒe kaka, aŋɔ, amadede, keklẽ kple nusiwo gblẽ ƒe seɖoƒewo me.

Ðe amadede aɖeke mele PVC si me kɔ ŋu kura oa?

Menye nenema kokoko o. PVC si me kɔ ate ŋu anye esi ƒe amadede nye akpaɖekedzimademade, blɔ si me kɔ alo dzoxɔxɔ vie le alesi wowɔe nu.

Ðe woate ŋu awɔ PVC sesẽwo le vacuum mea?

Ɛ̃. Woate ŋu awɔ PVC sesẽ ƒe hatsotso si sɔ le dzoxɔxɔ kple dɔwɔwɔ ƒe nyonyome megbe.

Ðe woate ŋu azã 1mm PVC hena nutata gogloa?

Woate ŋu azãe na nɔnɔme siwo goglo wu ne nu ƒe grade, aŋɔ ƒe didime, dzoxɔxɔ ƒe nɔnɔme, plug ƒe kpekpeɖeŋu kple draw ratio sɔ.

Dzoxɔxɔ ƒe dzoxɔxɔ kae wòle be woazã?

Dzoxɔxɔ nyuitɔ nɔ te ɖe atike si wowɔ, eƒe titrime, dzoxɔxɔnamɔ̃, mɔ̃, aŋɔ kple ɣeyiɣi si wotsɔ ƒoa xlãe dzi. Ele be dodokpɔwo wɔwɔ nafia nusi woawɔ ƒe fesre.

Ðe PVC dzi ɖena kpɔtɔna le dzoxɔxɔ ƒe nɔnɔme wɔwɔ vɔ megbea?

Dimension ƒe tɔtrɔ aɖewo ate ŋu adzɔ le dzoxɔxɔ kple fafaɣi. Ele be woado didime kple axadzi ƒe ʋuʋu kpɔ hena dzesi si wotia.

Ðe woate ŋu aƒo PVC sesẽwo ahatsoe wòakua?

Ɛ̃. Woateŋu azã dɔwɔnu siwo sɔ na punching, trimming kple die cutting le wɔwɔ vɔ megbe.

Ðe woate ŋu ata PVC si me kɔa?

Agbalẽtata ƒe dzesiwo ateŋu ado alɔ offset, screen, UV kple digital tata tiatia le ink kple adhesion dodokpɔ megbe.

Ðe woate ŋu atsɔ ga awɔ PVC-gbadzɛwoa?

Woate ŋu atsɔ PVC ƒe dzesi siwo sɔ akpe ɖe eŋu to ɣeyiɣi si me wowɔa nu geɖe, dzoxɔxɔ alo welding ƒe mɔnu bubu siwo sɔ me le kpeɖodzinana megbe.

Ðe 1mm ƒe agbalẽ sia sɔ na tablet blister packs?

Zi geɖe la, wozãa atikewɔgbalẽ siwo wotsɔ ɖe adzɔgbee siwo le tsɛ wu le tablet kple capsule blister packs me. Wotiaa 1mm ƒe agbalẽa wu na tray siwo le kpekpem wu kple ametakpɔnu siwo wowɔ ƒe agbawo.

Ðe PVC-gbadzɛa le dedie na nuɖuɖu babla mea?

Nuɖuɖu ƒe kadodo ƒe dzeside tɔxɛ si me nuŋlɔɖi siwo sɔ ɖe asi si me woayi kple nɔnɔme siwo me woazãe le koe wòle be woatia.

Ðe ɖetugbui leaƒe ƒe PVC ɖoa nuɖuɖu ƒe kadodo ƒe nudidiwo gbɔ le eɖokui sia?

Ao, ele be atike bliboa, si me nusiwo naa li ke, nusiwo wotsɔ wɔa dɔe, amadede kple nu bubu siwo wotsɔ kpena ɖe eŋu hã le, nasɔ na dɔwɔwɔ.

Ðe woate ŋu azã nu sia atsɔ awɔ atikewo ƒe agba siwo me dɔlékui mele oa?

Woate ŋu azã atikewɔwɔ ƒe nubablɛ ƒe dzesi ne woda asi ɖe sterile-barrier system bliboa, wɔwɔ, nutrenu, dɔlékuiwutike kple eƒe agbenɔƒe dzi vɔ megbe.

Ðe PVC si wozãna ɖaa nye film si me mɔxenu gãwo lea?

Mele be woawɔ nu ɖe ​​standard monolayer PVC ŋu abe xexeame katã ƒe mɔxenu gã ƒe film ene o. Woate ŋu abia PVC alo PVC/PCTFE xɔtuɖoɖo siwo ŋu wofa PVDC ɖo na nusiwo ŋu woate ŋu awɔ nuvevii.

Ðe PVC si me kɔ si wozãna ɖaa nye antistatic?

Ao, antistatic ƒe dɔwɔwɔ bia be woawɔ atike tɔxɛ aɖe kple afisi woɖoe be wòate ŋu anɔ te ɖe anyigba ƒe nɔnɔme nu.

Ðe PVC-gbadzɛa te ŋu nɔa te ɖe UV nua?

Mele be woatsɔe be UV ƒe dɔwɔwɔ ɣeyiɣi didi o. Gbedoxɔ me dɔwɔwɔwo bia be woatsɔ UV-si li ke grade kple yame ƒe nɔnɔme dodokpɔ ƒe nudidiwo.

Ðe PVC sesẽwo mate ŋu axɔ dzo oa?

Mele be woagblɔ tso plastik-gbadzɛ aɖeke ŋu be dzo mate ŋu age ɖe eme keŋkeŋ o. Ele be woatsɔ dodokpɔ aɖe si woatsɔ akpɔ alesi wowɔe pɛpɛpɛ kple eƒe titrime aɖo kpe dzo ƒe dɔwɔwɔ dzi.

Ðe woate ŋu atrɔ asi le amadedea kple eƒe gota gome ŋua?

Ɛ̃. Woate ŋu ada nusiwo me kɔ, siwo me mekɔ o kple esiwo le amadede vovovowo me siwo ƒe akpa siwo le keklẽm, matte, frosted alo embossed la akpɔ.

Ðe woate ŋu akpɔ kpɔɖeŋuwo femaxeea?

A4 alo esiwo wotso ƒe kpɔɖeŋu siwo li fifia ate ŋu anɔ anyi nuwo ƒe fe aɖeke maxɔmaxɔe, evɔ zi geɖe la, asisi lae xea dukɔwo dome agbatsɔʋuwo ƒe agbawo.

Nukae nye nudɔdɔ ƒe agbɔsɔsɔ suetɔ kekeake?

MOQ si wozãna ɖaa la ade 1000kg. Dzeside tɔxɛwo, amadedewo kple kekeme siwo wowɔ ɖe ɖoɖo nu ate ŋu abia agbɔsɔsɔ bubu.

Nukae nye ɣeyiɣi si woatsɔ awɔe?

Zi geɖe la, ewɔwɔ si wozãna ɖaa xɔa abe ŋkeke 7-15 ene le esi woɖo kpe eƒe nɔnɔme, kpɔɖeŋu, babla kple nusi wotsɔ de eme dzi vɔ megbe.

Nyatakaka kawoe hiã hafi woate ŋu ayɔ nyayɔyɔ?

Na eƒe titrime, kekeme, agbalẽ xatsaxatsa alo agbalẽ ƒe nɔnɔme, amadede, anyigba, wɔwɔme ƒe goglome, dɔwɔwɔ, dzesi tɔxɛ, agbɔsɔsɔme, babla kple teƒe si woayi.

Na Custom Rigid PVC Sheet Nyayɔyɔ

Ku ɖe HSQY Plastic Group ŋu

HSQY Plastic Group naa PVC agbalẽ sesẽwo, PVC blister filmwo, atikewo ƒe babla filmwo, PET thermoforming agbalẽwo, PP agbalẽwo kple plastic nu siwo wowɔ ɖe ɖoɖo nu na dukɔwo dome B2B asisiwo.

HSQY doa alɔ thermoforming dɔwɔƒewo, nubablɛwo trɔlawo, atike-mɔ̃wo ƒe babla wɔlawo, agbalẽtalawo, nusiwo wotsɔ tso duta vɛ kple mamalawo kple nusiwo wotsɔ tia, kpɔɖeŋu dodokpɔ, ewɔwɔ si wowɔ ɖe ɖoɖo nu, nyonyome me toto kple nubablɛ siwo wotsɔ ɖoa ​​duta.

Bia Nya Siwo Woagblɔ Kple Kpɔɖeŋu