Fri Foam Bod
Wan jenɛral-pɔpɔs statin pɔynt we lɔwa wet ɛn wan smol sɔfa impɔtant fɔ displei, print ɔ laytwɛt fabrikeshɔn program.
Mek wi biliv:- Ink ɛn adhesion tɛst
- Flatness ɛn ed kwaliti
- Target density we yu de du
PVC FOAM BOARD MANUFAKTƆR
PVC Foam Bod fɔ Sayn, Fɛnichɔ & Intɛriɔ Projɛkt
Mach di bod kɔnstrɔkshɔn, sɔfa, dɛnsiti ɛn shit fɔmat to yu printin, routin, lamineshɔn ɔ kabinɛt program—dɔn validet di aktual gred bifo dɛn prodyuz.
- Fri fom
- Sɛluka
- Dɛn kin pul am togɛda
- Laminated we dɛn mek
DI KWƐK ANSA
Wetin na PVC fom bod?
PVC fom bod na layt, rigid sheet we dɛn mek wit fom PVC kɔr. Dɛn kin tink bɔt am fɔ sayn, ɛgzibishin displei, fɔnicha kɔmpɔnɛnt ɛn intɛriɔ fit-ɔut bikɔs dɛn kin kɔt am, rout am, drɔ am, print am ɔ lamin am we di gred ɛn di prɔses kɔmpitabl.
Fɔ B2B sɔs, 'PVC fom bod' na jɔs di statin pɔynt. Bɔd kɔnstrɔkshɔn, dɛnsiti, tiknɛs, sɔfa, kɔlɔ ɛn daunstrim prɔsesin fɔ rayt insay di spɛsifikɛshɔn ɛn chɛk pan ripɔt sampul.
BƆD FAMILI SƐLƐKTƆ
Pik di kɔnstrɔkshɔn bifo yu kɔmpia di prayz
Dis na prɛktikal statin pɔynt dɛm, nɔto yunivasal pefɔmɛns klem. Faynal suitability dipen pan di spɛsifikɛd gred, tiknes, density ɛn fabrication prɔses.
Celuka fom bod
Wan had-skin kɔnstrɔkshɔn we dɛn kin evalyu bɔku tɛm fɔ di pat dɛn we dɛn dɔn rout, di kɔmpɔnɛnt dɛn fɔ di fɔnicha ɛn di prɔjɛkt dɛn usay dɛn kin lɛk fɔ gɛt sɔfa ɔ ed we strɔng pas am.
Mek wi biliv:- CNC edj finish fɔ dɔn
- Fastener pefɔmɛns
- Di hadnɛs we di surface gɛt
Fom Bod we dɛn dɔn kɔ-ɛkstrud
Wan layt kɔnstrɔkshɔn we dɛn kin shɔtlist we di wan dɛn we de bay want wan difrɛn skin ɛn kɔr kɔmbayn fɔ displei ɔ di kɔmpɔnɛnt dɛn we dɛn mek.
Mek wi biliv:- Skin kɔnstrɔkshɔn
- Surface kɔnsistɛns
- Kɔt ɛn rout di rizɔlt dɛn
Bod fom we laminated
Wan dɛkɔretiv-sɔfa opshɔn fɔ kabinɛt, wɔl-panɛl ɛn fɔnicha program usay di finish na pat pan di bɔd we dɛn gi.
Mek wi biliv:- Film ɔ finish kɔd
- Bonding ɛn edj ditel dɛn
- Kɔlɔ aprɔval sampul
KƆRƐNT PRODƆKT SƆTLIST
8 PVC fom bod opshɔn dɛn fɔ kɔmpia
Opin wan prɔdak fɔ rivyu di ditil dɛn we i gɛt naw, dɔn sɛn di aplikeshɔn ɛn di we aw dɛn de du am fɔ mek dɛn kɔnfɔm di gred.
CELUKA • FƐNITƆR
Rigid PVC Celuka Bord fo Furniture
Fɔ bayer dɛn we de kɔmpia wan fam-sɔfays bɔd fɔ fɔnicha ɛn pat dɛn we dɛn dɔn rout.
Luk di prɔdak
LAMINATED • KABINƐT
4 × 8 laminated PVC foam bord
Wan dekɔretiv opshɔn fɔ kabinɛt ɛn wɔl-panɛl program dɛn.
Luk di prɔdak
RIGID • HAY DƐNSITI
High-Density rigid PVC fom bod
Fɔ program dɛn we bigin wit wan denser rigid-sheet rikwaymɛnt.
Luk di prɔdak
WAYT • MƆLTI-TIKNƐS
Laytweit wayt PVC fom bod
Tik ɛn big fɔmat opshɔn dɛn we dɛn dɔn pik fɔ rivyu di prɔjek.
Luk di prɔdak
1220×2440 MM • LAMINƐT
Laminated Board fɔ Kichin Kabinɛt dɛn
Wan 4×8-fɔmat dɛkɔretiv bod fɔ evalyu fɔ kabinɛt prɔjek dɛn.
Luk di prɔdak
4×8 • WAYT
4×8 Wait PVC Foam Bord
Wan standad-fɔmat statin pɔynt fɔ sayn ɛn fabrikeshɔn inkyɔri.
Luk di prɔdak
KƆ-ƐKSTRUD • DISPLAY
4×8 Ko-ekstrud Bod fɔ Displei dɛn
Wan ko-extruded shit opshɔn fɔ displei ɛn fabricated-pat sampling.
Luk di prɔdak
CELUKA • SMƆL TƆK: HAD SƆFƐS
High-Density Had Sɛluka Shit
Fɔ bayer dɛn we de evalyu wan had-sɔfa Celuka kɔnstrɔkshɔn.
Luk di prɔdakAPPLIKƐSHƆN RƆUTIN
Start wit di yus kes, dɔn tɛst di prɔses
Gi di spɔlayt di finish-pat rikwaymɛnt—nɔto jɔs di sheet saiz—so di matirial we dɛn pik go akɔn fɔ di fabrication ɛn apinans.
Sayn dɛn & Dairekt Printin
Tɔk di we aw dɛn de print, di ink sistem, distans fɔ si, di kɔlɔ, di say we di bɔd de ɛn if dɛn go put di bɔd ɔ dɛn go mek am wit freym.
Sampul tɛst: ink adheshon, kɔlɔ, flatnɛs ɛn kɔt ed.Displei & Ɛgzibishin dɛn
Sheb pat dimɛnshɔn, fold ɔ asɛmbli we, lod pɔynt, grafik aplikeshɔn ɛn transpɔt rikwaymɛnt.
Sampul tɛst: routin, bonding, asɛmbli ɛn pak-pat handlin.Kabinɛt & Fɛnichɔ
Difayn do ɔ kakas yuz, finish, CNC tulpat, edj tritmɛnt, hadwae ɛn di ɛkspɛkt savis ɛnvayrɔmɛnt.
Sampul tɛst: mashin edj, fastɛns, laminɛshɔn ɛn kɔlɔ mach.Intɛriɔ Panɛl & Patishɔn dɛn
Gi di sistem drɔin, fiks we, finish, mentenɛns nid ɛn ɛni prɔjek-spɛsifi k kɔmplians dɔkyumɛnt.
Sampul tɛst: jɔyn ditel, fiks we, sɔfa ɛn instɔleshɔn mɔk-ap.SPƐSIFIKƐSHƆN-FƆS RFQ
Send wan kɔmparabl rikwest fɔ kot
Wan kɔmplit RFQ de ridyus bak-ɛn-fɔd ɛn mek i izi fɔ kɔmpia di kot fɔ di saplay dɛn. If wan valyu nɔ disayd, diskrayb di aplikeshɔn ɛn aks fɔ wan rɛkɛmɔnded sampling rɛnj.
Impɔtant: Tɛm dɛn lɛk 'outdoor,' 'fire-retardant,' 'fud contact' ɔ 'chemical resistant' nid fɔ gɛt gred we gɛt fɔ du wit am ɛn rayt dɔkyumɛnt. Nɔ tink se dɛn de aplay to ɛvri PVC fom bod.
| RFQ fild | Wetin fɔ tɔk | Wetin mek i impɔtant |
|---|---|---|
| Aplay fɔm | Finish prodak ɛn savis ɛnvayrɔmɛnt | Fram di gred sɛlɛkshɔn |
| Bɔd famili | Fri fom, Sɛluka, kɔ-ɛkstrud ɔ laminated | Chenj di surface/core konstrakshɔn |
| Fɔmat fɔ di shit | Lɛngth × wit, trim tolɛreshɔn ɛn gren/finish dairekshɔn | Impacts yield ɛn pak |
| Tiknɛs & density we dɛn kin gɛt | Target ɛn akseptabl tolɛreshɔn/rɛnj | Influens di wet ɛn fabrication bihayvya |
| Surface & kɔlɔ | Kɔlɔ kɔd, finish, fim ɔ apruv rɛfrɛns | Set di vijual akseptans standad |
| Di we aw dɛn de du di wok | Print, CNC route, saw, drɔl, bond, laminate ɔ fasten | Difayn di sampul tɛst dɛn |
| Dokumɛnt dɛn | Na di standad ɔ ripɔt dɛn nɔmɔ we di prɔjek nid | Avɔyd fɔ tink bɔt tin dɛn we dɛn nɔ sɔpɔt |
| Biznɛs | Annual volyum, ɔda kwantiti, pak, pɔt ɛn target de | Sɔpɔt wan kot we pɔsin kin yuz |
FABRIKƐSHƆN CHƐKPOINT DƐN
Validate di aktual bod wit yu prodakshɔn we yu de du
Matirial diskripshɔn nɔ kin tek ples fɔ wan prɔses trayal. Yuz ripɔt ikwipmɛnt, kɔnsumabl ɛn sɛtin ɛnisay we i pɔsibul.
Dairekt print & grafik
Chek ink ɔ adhesive kompitibiliti, surface pripiamɛnt, curre kondishɔn, kala ɛn adhesion pan di nominated fes.
Sawing & CNC routing we yu de yuz
Kɔnfɛm tul, fid, spid, ɔt, bur, edj apinans ɛn dimɛnshɔnal ripitabiliti pan di tiknɛs we dɛn dɔn pruv.
Drill & fastenin we yu de du
Test ol kwaliti, edj distans, hadwae, pul-aut bihayvya en joyn dizain pan di density en tiknes we yu pik.
Bonding & lamineshɔn fɔ di tin dɛn
Validate adhesive ɔ film, prɛshɔn, tɛmpracha, dwɛl tɛm, edj ditel ɛn apinans afta kondishɔn.
FƆM SAMPUL TO PRODƆKSHƆN
Yuz wan standad we dɛn rayt fɔ gri fɔ yu
- 1
Wetin i min
Sheb di yus we dɔn dɔn, drɔin, prɔsesin, akseptans krayteria ɛn kɔmɛshɔnal nid dɛn.
- 2
Ɛgzampul
Selekt wan rilevɛns kɔnstrɔkshɔn, tik, dens, sɔfa ɛn kɔlɔ fɔ tray.
- 3
Validɛt yu
Rɔn printin, mashin, bond, fiks ɔ asɛmbli tɛst yuz di prɔses we yu want.
- 4
Gri
Rikɔd di spesifikeshɔn we dɛn aksept, apia rɛfrɛns, pak ɛn di dɔkyumɛnt dɛn we dɛn nid bifo yu ɔda.
FAQ WE YU DE BAY
PVC foam bod sos kweshon dem
Short ansa fɔ di tim dɛn we de bay, di wan dɛn we de mek prɔdak ɛn di wan dɛn we de mek tin dɛn.
Aks wan kwɛstyɔn we gɛt fɔ du wit di prɔjekWetin na di difrɛns bitwin fri fom ɛn Celuka PVC fom bod?
Dɛn de yuz difrɛn prɔses kɔnstrɔkshɔn dɛn. Fri fom na kɔmɔn fɔ shɔtlist fɔ laytwɛt print ɛn displei wok, we dɛn kin evalyu Sɛluka bɔku tɛm usay dɛn kin lɛk fɔ gɛt skin we at ɔ ed we dɛn mek wit mashin we strɔng. Kכmpεr aktual sεmpl dεm biכs dεnsiti, fכmyuleshכn εn tiknes de afekt di risכlt dεm bak.
Yu tink se ɛvri PVC fom bod fayn fɔ yuz na do?
No blanket asɔmpshɔn nɔ fɔ mek. Stet di ɛksplɔshɔn, di say, di tɛm we dɛn fɔ tek, di mawnt, kɔlɔ ɛn di prɔjek rikwaymɛnt dɛn, dɔn aks fɔ wan fayn gred ɛn sɔpɔtin dɔkyumentri usay nid de.
Yu tink se dɛn kin print PVC fom bod dairekt wan?
Bɔku PVC fom bod dɛn kin yuz fɔ print sayn ɛn displei wok, bɔt di kɔmpatibiliti dipen pan di bod sɔfays, ink sistɛm ɛn di pripiamɛnt. Apruv ink adheshon, cure ɛn kala pan di aktual sheet.
Yu kin CNC routed ɛn fasten am?
Dis na kɔmɔn fabrikeshɔn rod fɔ di rayt gred. Test tul sɛtin, edj finish, ɔt, skru ɔ insɛt dizayn, edj distans ɛn di density/tiknes we yu dɔn pik bifo prodakshɔn.
Us ditil dɛn nid fɔ kot?
Send aplikeshɔn, bod famili, saiz, tik, density ɔ gred, sɔfa/kɔlɔ, prɔsesin we, kwantiti, pak, ples fɔ go ɛn di dɔkyumɛnt dɛn we dɛn nid. Fɔto we dɛn dɔn drɔ ɔ we gɛt pat we dɔn dɔn, kin fayn we i de.
A fɔ gri fɔ mek wan sampul bifo a ɔda bɔku bɔku tin dɛn?
Yɛs. Wan ripɔt sampul de mek yu tim chɛk aw i tan, aw dɛn de tolɛret ɛn aw dɛn de du am. Rikɔd di aprɔv spɛsifikɛshɔn ɛn sampul rɛfrɛns so ɔl tu di pati dɛn yuz di sem akseptɛns beslayn.
Aw a fɔ kɔmpia kot frɔm difrɛn spɔlayt dɛn?
Kɔmpia lɛk fɔ lɛk: bod kɔnstrɔkshɔn, dimɛnshɔn ɛn tolɛreshɔn, dɛnsiti/grɛd, sɔfa, kɔlɔ, pak, dɔkyumentri, tɛst sampul ɛn tred tɛm. Prays fɔ wan sheet nɔmɔ kin ayd difrɛns pan matirial ɔ pak.
YU RƐDI FƆ TƐKNIKAL MATCH?
Send yu drɔin, prɔses ɛn ɛni ia dimand
HSQY kin yuz yu projɛkt brif fɔ smɔl di bɔd famili ɛn pripia wan sampul ɔ kot fɔ kɔnfɔm.
Rikwest Samples & Quote
Inklud: yuz • saiz • tik • density • surface • kwantiti • ples fɔ go
