Factory High Density Rigid PVC Fom Bod ɛn PVC Shit Manufacturer

High Density Rigid PVC Foam Bod Manufakchur

HSQY de mek rigid PVC fom bod fɔ sayn, dijital printin, fɔnicha, kichin ɛn batrum kabinɛt, intɛriɔ panɛl, patishɔn, ɛgzibishin displei, CNC-mashin kɔmpɔnɛnt ɛn jenɛral plastic fabrikeshɔn.

di tiknes dεm we de fכm de frכm lεk 1mm to 35mm, wit dεnsiti opshכn dεm frכm lεk 0.35 to 1.0g/cm³. Standart shit saiz dɛn inklud 1220 × 2440mm, 915 × 1830mm, 1560 × 3050mm ɛn 2050 × 3050mm.

Wait na di standad kala fɔ print, sayn, kabinɛt ɛn intɛriɔ dɛkɔreshɔn. Blak, rɛd, yɔlɔ, blu, grɛn ɛn ɔda kɔstɔmayt kɔlɔ dɛn kin bak akɔdin to di density, tik ɛn minim ɔda kwantiti we dɛn nid.

Di prodakt list we dɛn sho na 18mm rigid PVC fom bod we gɛt wayt ɔ kɔstɔmayz kɔlɔ, wit standad saiz we na 1220 × 2440mm. Ɔda tik, dimɛnshɔn, dens ɛn sɔfayz finish de fɔ bɔku ɔda.

Di density rεnj we de inklud laytwεt, midul-dεnsiti εn ay-dεnsiti gred dεm. Di wan dɛn we de bay fɔ spɛsifa di ɛksaktɔl density we dɛn nid instead fɔ abop pan di jenɛral diskripshɔn nɔmɔ 'high density PVC foam board.'

Eksplore di komplit HSQY PVC fom bod renj fɔ fri-fom, ay-dɛnsiti ɛn kɔstɔmayz shit opshɔn dɛn.

Rikwest PVC Foam Bod Prayz    Rikwest Bɔd Sampul dɛn

PVC foam bord prodakt vidio

Wach di fim we de dɔŋ fɔ lan mɔ bɔt HSQY rigid PVC fom bod dɛn, tiknes dɛn we de, sheet saiz dɛn, sɔfays kwaliti, di we aw dɛn de mek ɛn di opshɔn dɛn fɔ aplikeshɔn.

Wetin Na Ay Densiti Rigid PVC Fom Bɔd?

High-density rigid PVC foam bod na wan expanded polyvinyl chloride sheet wit fayn selula kor en rigid outa surface.

I sεlyul strכkchכ de ridyus wet kכmpεr wit sכlid rigid PVC we i de rεtεn yusful stiffnεs, sכfayz hadnεs, mכsichכ rεsistεns εn fabricashכn pεrformεns.

Dɛn kin kɔl di matirial bak ɛkspanda PVC shit, PVC fom shit, fom PVC bod, rigid PVC fom panɛl, Fɔrɛks bod ɔ PVC sayn bod.

Di gred dɛn we gɛt ay density jɔs de gi big rigiditi, sɔfays hadnɛs, impak rɛsistɛns, skru ritɛnshɔn ɛn mashin stebiliti pas laytwɛt displei gred dɛn.

Density rikwaymɛnt nɔ standad akɔdin to ɛvri manifakta. So wan ɔda fɔ no di ɛksaktɔ density insay g/cm³, togɛda wit di tiknes we dɛn nid, tolɛreshɔn ɛn aplikeshɔn.

PVC fom bod nɔto ɔtomɛtik wan strɔkchɔral bildin panɛl. Shelf, kabinɛt, patishɔn ɛn lod-bearing kɔmpɔnɛnt dɛn fɔ disayn ɛn tɛst akɔdin to di bod tik, dɛnsiti, span, fastɛns ɛn lod we dɛn de ɛkspɛkt.

Rigid PVC foam bord prodakt imej dɛn

Rigid PVC foam bod spesifikasi

Faynal tiknɛs tolɛreshɔn, density tolɛreshɔn, dimɛnshɔn, kɔlɔ, sɔfa, protɛktiv fim, ɔda pefɔmɛns ɛn mɛkanikal prɔpati dɛn fɔ kɔnfyus insay wan aprɔv rayt spɛsifikɛshɔn.

Fri-Fɔm, Sɛluka ɛn Kɔ-Ɛkstrud PVC Fom Bɔd

Di tri we dɛn fɔ mek tin dɛn nɔ fɔ trit dɛn lɛk di sem prɔdak. Di wan dɛn we de bay fɔ spɛsifa if di prɔyoritɛt na print kwaliti, lɔw wet, had skin, skru holdin, lamination ɔ CNC edj kwaliti.

Aw fɔ Pik PVC Fom Bɔd Density

Densiti de afɛkt di sheet wet, rigiditi, bɛnd rɛsistɛns, sɔfays hadnɛs, skru ritɛnshɔn, mashin stebiliti ɛn matirial kɔst.

Dɛn density rɛnj ya na sɛlɛkshɔn gaydlayn pas fɔ bi yunivasal industri klasifikeshɔn. Faynal pכrfomans dipכnt pan fכmyuleshכn, prodakshכn mεtכd, tik, skin strכkchכ εn tεst.

PVC foam bod tiknes gayd

Tik nɔmɔ nɔ de sho se i gɛt trɛnk. Dɛn fɔ tink bak bɔt di bɔd dɛnsiti, di span we nɔ sɔpɔt, di edj dizayn, di we aw dɛn de fast am, di tɛmpracha ɛn di lod we dɛn de op fɔ.

Ki Benefits fɔ Rigid PVC Fom Sheet

Laytwɛt wit Yuzful Rigiditi

di εkspεnd sεlyul kכr de ridyus di bod wet we yu kכmpεr wit wan ikwal sכlid PVC shit, we de εp fכ ridyus di hεndlin εn transpכtεshכn rikwaymεnt.

Low Wata Absɔpshɔn

PVC fom bod gɛt smɔl wata absɔpshɔn ɛn i nɔ de swel ɔ rɔtin di sem we lɛk bɔku panɛl dɛn we dɛn mek wit wud we dɛn nɔ trit.

Smooth Printable Surface we yu kin print

Wait mat, satin ɛn smol sɔfays kin sɔpɔt flatbed UV printin, skrin printin, vaynil grafik, peint ɛn lamination afta kɔmpatibiliti tɛst.

Izi CNC ɛn Mɛkanikal Fabrikeshɔn

Di bod kin saw, drɔ, rout, engrav, mil, day kɔt ɛn mɛkanikal fastɛn yuz fayn tul ɛn prɔsesin paramita.

Mɔstɔ ɛn Kɔrɛshɔn Resistɛns

PVC fom sheet fayn fɔ bɔku humid indo ɛnvayrɔmɛnt ɛn aplikeshɔn dɛn we dɛn de ɛkspos to kɔmɔn klin ɛjɛn ɔ kɔrosiv kɔndishɔn.

Kastom Densiti ɛn Kɔlɔ

Di wan dɛn we de bay kin spɛsifa di density, tiknes, sheet saiz, kɔlɔ, surface finish, protɛktiv film, pak ɛn lɛbl akɔdin to prodakshɔn fisibiliti.

Fizik Prɔpati dɛn fɔ Rigid PVC Fom Bɔd

Dis na rɛfrɛns valyu dɛn frɔm di prɔdak infɔmeshɔn we de naw. Aktual rizulyt kin difrɛn wit di density, tiknes, fɔmyulashɔn, tɛst tɛmpracha, sampul dairekshɔn ɛn tɛst we.

Vicat softening temperechur na labכtכri mεtirial indikεtכr εn dεn nכ fכ intaprit am as di rεkomεnd kכntinyu savis tεmprachכ fכ wan fabricated kכmכpכnt.

PVC Foam Bod fɔ Print ɛn Sayn

Wait rigid PVC fom bod de yuz bɔku bɔku wan as sabstret fɔ sayn, pɔynt-ɔf-pɔch displei, mɛnyu bod, ɛgzibishin grafik ɛn print dɛkɔretiv panɛl.

Print-grɛd bɔd fɔ gi kɔntrol wayt pɔynt, kɔnsistɛns tik, stebul flatnɛs ɛn wan sɔfays we fit fɔ di ink sistɛm we yu dɔn pik.

PVC Foam Bod fɔ Kabinɛt ɛn Fɛnichɔ

Yu kin yuz midul ɛn ay-densiti PVC fom bod fɔ kichin kabinɛt, batrum vaniti, wodrɔb, shelf, domɔt, drɔwa kɔmpɔnɛnt ɛn dɛkɔretiv fɔnicha panɛl.

We yu kɔmpia am wit MDF ɔ patikyulabɔd we dɛn nɔ trit, PVC fom bɔd nɔ de absɔb mɔstɔ ɛn swel di sem we. So dɛn kin pik am bɔku tɛm fɔ ples dɛn we gɛt humid insay os.

Fɔnicha aplikeshɔn fɔ evalyu skru pul-ɔut trɛnk, hinj ritɛnshɔn, bɛnd, krip, sɔfays hadnɛs ɛn lɔng tɛm lod.

Di ay-densiti PVC fom bod nɔ fɔ ɔtomɛtik trit am lɛk dairekt strɔkchɔral riplesmɛnt fɔ plai wud. Panel span, sɔpɔtin freym, fastɛns ɛn ɛkspɛkt lod fɔ validet.

Aplikeshɔn fɔ PVC Fom Bɔd ɛn PVC Shit

• Advatayzmɛnt ɛn sayn dɛn: Sayn dɛn we dɛn print, bilbɔd dɛn, mɛnyu bɔd dɛn, rital displei dɛn, ɛgzibit grafik dɛn ɛn panɛl dɛn we dɛn kin yuz fɔ bay tin dɛn.

• Fɛnichɔ ɛn kabinɛt: Kichin kabinɛt, batrum vaniti, wodrɔb, shelf ɛn fɔnicha kɔmpɔnɛnt dɛn.

• Intɛriɔ dɛkɔreshɔn: Wall panɛl, siling ɛlimɛnt, patishɔn, dɛkɔretiv panɛl ɛn ɛgzibishin strɔkchɔ.

• CNC fabrication: Routed lɛta, tɛmplat, mɔdel, protɔtayp, mashin pat ɛn displei kɔmpɔnɛnt dɛn.

• Print ɛn mawnt: UV-print sabstret, foto mawnt, vaynil grafik ɛn laminated displei.

• Indastrial yus: Protɛktiv panɛl, kɔrɛshɔn-rɛsistant kɔmpɔnɛnt, tɛmplat ɛn nɔ-lod-bearing fabricated pat.

Cutting, CNC Routing ɛn Fabrikɛshɔn

Rigid PVC fom bod kin prosɛs yuz bɔku wud wok ɛn plastic-fabrikeshɔn tul dɛn.

Saw we dɛn de kɔt

Yu kin yuz sɛkɔral saw, panɛl saw ɛn jigsaw wit fayn fayn tut bled dɛn. Di sheet fɔ ful-ɔp fɔ sɔpɔt am fɔ ridyus di vaybreshɔn ɛn di ed damej.

CNC Routing ɛn Engraving

Rota spid, fid ret, kata jɔyometri ɛn dip fɔ ɛni pas fɔ ajɔst to di bod density ɛn tiknes fɔ prodyuz klin edj ɛn ridyus ɔt bildup.

Drilin ɛn Mɛkanikal Fastenin

Yu kin drɔ di bod ɛn tay am wit skru, rivet ɔ bolt. Paylɔt-ol saiz, edj distans, was saiz ɛn lod we dɛn de ɛkspɛkt fɔ validet.

Adhesive Bonding we gɛt fɔ du wit am

Yu kin pik kɔmpitabl PVC sɔlvɛnt siment, kɔntakt adeziv ɔ strɔkchɔral adeziv akɔdin to di jɔyn dizayn ɛn di tin dɛn we dɛn dɔn bon.

Laser Kɔt we dɛn de kɔt

Kɔnvɛnshɔnal lɛsa kɔt PVC jɔs nɔ kin fayn bikɔs fɔ ɔt PVC kin rilis kɔrosiv klorin-kɔntinɛnt fyum we kin ambɔg pɔsin ɛn ikwipmɛnt.

Nɔmal fɔ yuz mɛkanikal kɔt, routin ɔ day kɔt pas spɛshal PVC-prɔsesin ikwipmɛnt ɛn di rayt ɛkstrakshɔn sistem dɛn de.

Wata Resistans ɛn Humid Envayrɔmɛnt

PVC fom bod gɛt smɔl wata absɔpshɔn ɛn dɛn kin yuz am na batrum, kichin, was rum, bɛsin ɛn ɔda humid intɛriɔ ɛnvayrɔmɛnt dɛn.

Di bod insɛf nɔ de rɔtin ɔ swel lɛk panɛl dɛn we dɛn mek wit wud we dɛn nɔ trit, bɔt di instɔleshɔn we dɛn dɔn dɔn nɔ kin mek wata pas fɔ insɛf.

Jɔyn, skru ol, sɔpɔtin freym, adeziv ɛn wɔl intafɛs fɔ disayn fɔ di mɔstɔ we dɛn de ɛkspɛkt.

Yuz na do ɛn UV Resistance

Standart wayt PVC fom bod na in dɛn kin rɛkɔmɛnd mɔ fɔ indo sayn, printin, fɔnicha ɛn intɛriɔ aplikeshɔn pas dɛn spɛshal wan kɔnfyus wan ɔda gred.

If yu de na do, i kin mek di kɔlɔ chenj, chalk, wɔp ɔ ridyus mɛkanikal pefɔmɛns dipen pan klaymat, shit kɔlɔ, tik, fastɛns ɛn instɔleshɔn ɔriɛnteshɔn.

Lɔng tɛm ɛkstirian projɛkt fɔ spɛsifa wan UV-stabiliz gred, ɛkspɛkt ɛksplɔshɔn tɛm, jiografik ples, sheet tik ɛn fastɛns we.

Dɛn fɔ tink bɔt di tɛmal ɛkspɛnshɔn bay we dɛn gi di rayt instɔleshɔn kliarens ɛn avɔyd fɔ stɔp big panɛl dɛn pasmak.

Faya Pɔfɔmɛnshɔn ɛn Sefty

PVC fom bod nɔ fɔ de diskraib jɔs as fayapruf.

di bihayvya fכ bכn dipכnt pan fכmyuleshכn, dεnsiti, tik, sεmpl כryenteshכn, kכndishכn εn tεst mεtכd.

Klɛm lɛk fɔ kil yusɛf, UL 94, Klas A ɔ ɔda faya klasifikeshɔn fɔ jɔs yuz we valid ripɔt kɔba di ɛksaktɔl prodak gred ɛn tik.

If yu ɔt, bɔn ɔ we yu nɔ kɔntrol am wit ɔt-wok we PVC de wok, i kin mek yu gɛt bad bad ɛn kɔrosiv fum. Di say dɛn we dɛn de mek fabrik fɔ yuz di rayt we fɔ mek di briz kɔmɔt fayn, fɔ pul dɔst ɛn fɔ mek dɛn nɔ gɛt prɔblɛm wit di wok we dɛn de du.

PVC Foam Bord vs. Solid PVC Sheet ɛn MDF

Kwaliti Kontrol fɔ PVC Fom Bɔd

• PVC resin ɛn raw-matirial verifyeshɔn.

• Shit tik ɛn tik tolɛreshɔn.

• Density ɛn density tolɛreshɔn.

• Shit lɔng, waid, dayagɔnal ɛn skwea.

• Surface smoothness, glos ɛn tɛkstɔr.

• Wait pɔynt, kɔlɔ difrɛns ɛn batch kɔnsistɛns.

• Flatness, bowing ɛn warpage.

• di sεl strכkchכ εn di ed we i de sho.

• Blak spat, dɔti, pit ɛn sɔfayz damej.

• Printin, adhesion ɛn lamination pefɔmɛns.

• CNC routing, drilin ɛn kɔt pefɔmɛns.

• Skru ritɛnshɔn ɛn mɛkanikal tɛst usay dɛn nid am.

• Wata absɔpshɔn, Vicat ɛn faya tɛst usay dɛn spɛsifa.

• Protektiv film, lebul, pak ɛn palet inspekshɔn.

Kastom PVC Foam Bod Opshɔn dɛn

• Tiknes frɔm lɛk 1mm to 35mm.

• Densities frכm aprכksimatli 0.35 to 1.0g/cm³.

• 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm ɛn 2050 × 3050mm sheet dɛn.

• Customized sheet ɛn kɔt-pies dimɛnshɔn dɛn.

• Wait, blak, rɛd, yɔlɔ, blu, grɛn ɛn kɔstɔmayt kɔlɔ dɛn.

• Mat, satin, smol ɛn glos sɔfays.

• Printin, sayn, fɔnicha ɛn CNC gred dɛn.

• Fri-fom ɛn aplikeshɔn-spɛsifi k skin opshɔn dɛn.

• UV-stabilized ɔda fɔmyulashɔn dɛn.

• Protektiv film ɛn kɔstɔmayt sheet lɛbl dɛn.

• PE bag, kraft pepa, katon ɛn ɛkspɔt-palet pak.

Pakɛj ɛn Ɛkspɔt Delivri

Sampul pak: Dɛn kin protɛkt smɔl smɔl sampul dɛn wit fim, kraft pepa ɔ katon.

Shit protɛkshɔn: Dɛn kin yuz PE bag, protɛktiv film, kraft pepa ɛn kɔna protɛkshɔn akɔdin to di sɔfa ɛn transpɔt rikwaymɛnt dɛn.

Palet pak: Dɛn kin stak sheet dɛn pan plai wud ɔ ɛkspɔt palet wit strap ɛn panɛl dɛn we de protɛkt.

Prayvet lɛbl: Dɛn kin gi yu kɔstɔmayt sheet lɛbl, palet lɛbl, katon mak ɛn pak list.

Kontena lod: Lod kwantiti dipen pan tik, dens, shit dimɛnshɔn, palet dizayn ɛn ligal wet ristrikshɔn.

Lid tɛm: Standart prodakshɔn nɔmal fɔ tek lɛk 15-20 dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, kwantiti, pak ɛn dipɔsit.

PVC fom bod SGS Dokument

Daunlod di SGS dɔkyumɛnt we de fɔ rɛfrɛns. Kɔnfɛm se di ripɔt kɔba di ɛksaktɔl dɛnsiti, tik, kɔlɔ, fɔmyulashɔn ɛn aplikeshɔn we de insay di ɔda.

   Daunlod PVC Foam Bod SGS Dokumɛnt

Infɔmeshɔn we yu nid fɔ mek yu gɛt PVC Fom Bɔd Kɔt

• Faynal aplikeshɔn: sayn, printin, kabinɛt, fɔnicha, patishɔn, wɔl panɛl ɔ CNC pat.

• Rikwayd tik ɛn tik tolɛreshɔn.

• Rikwayd density ɛn density tolɛreshɔn.

• Shit lɔng, wit ɛn kɔt tolɛreshɔn.

• Wait, blak ɔ kɔstɔmayt kɔlɔ.

• Mat, satin, smol ɔ glos finish.

• Fri-fom, skin ɔ ɔda strɔkchɔ we dɛn nid.

• Printin, laminating, CNC routin ɔ fastɛns prɔses.

• Instɔlɛshɔn insay os ɔ na do.

• UV, faya, kemikal ɔ mɛkanikal tɛst we dɛn nid.

• Protektiv film ɛn labeling rikwaymɛnt dɛn.

• Ɔda kwantiti ɛn ɛstimat ɛni ia volyum.

• Pak we ɛn di pɔt usay dɛn de go.

• Di de we dɛn nid fɔ sɛn di tin ɛn di tɛm dɛn we dɛn fɔ du fɔ di tred.

Send Yu PVC Foam Bod Rikwaymɛnt dɛn

Wetin Mek Yu Pik HSQY as Yu PVC Fom Bɔd Splaya?

• Rigid PVC fom sheet frɔm lɛk 1mm to 35mm.

• Density opshכn dεm frכm aprכksimatli 0.35 to 1.0g/cm³.

• Standart ɛn big-fɔmat shit dimɛnshɔn dɛn.

• Printin, sayn, fɔnicha ɛn CNC gred dɛn.

• Wait ɛn kɔstɔmayt kɔlɔ prodakshɔn.

• Customized surface finish ɛn protɛktiv film.

• Sampul fɔ print, kɔt, routin ɛn fasten tɛst.

• Kwaliti inspekshɔn agens di spɛsifikɛshɔn dɛn we dɛn dɔn gri fɔ.

• Ekspɔt pak, lɛbl ɛn intanashɔnal-delivri sɔpɔt.

Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ evaluate wan sampul yuz di kɔstɔma in aktual printa, CNC router, adeziv, fastener, kabinɛt hadwae ɔ instɔleshɔn sistem.

Kontakt HSQY fɔ Sampul ɛn Prayz

HSQY Sɛtifiket ɛn Globɛl Ɛgzibishin dɛn

Dɛn fɔ chɛk di sɛtifiket ɛn tɛst ripɔt dɛn we de agens di rayt PVC fom bod gred, tik, density, kɔlɔ ɛn di makit we dɛn want fɔ mek.

Kwɛstyɔn dɛn we dɛn kin aks bɔku tɛm bɔt Rigid PVC Foam Board

Wetin na ay-density rigid PVC fom bod?

Na wan ɛkspanda rigid PVC sheet wit wan sɛlular kɔr. Di gred dɛn we gɛt ay density de gi inkris rigiditi, sɔfays hadnɛs ɛn mashin stebiliti fɔ fɔnicha, kabinɛt, CNC pat, sayn ɛn intɛriɔ panɛl dɛn.

Us density dɛn kin tek as ay-density PVC fom bod?

No wan yunivasal threshold nɔ de. insay di HSQY rεnj, gred dεm nia di כp pat pan di 0.35-1.0g/cm³ rεnj de gi big dεnsiti, bכt di εksakεt dεnsiti mכs rayt insay di כda spεsifikεshכn.

Wetin na di difrɛns bitwin PVC fom bod ɛn sɔlid PVC sheet?

PVC fom bod gɛt sɛlular strɔkchɔ ɛn i layt. Sɔlid rigid PVC shit nɔ gɛt fom, i dense ɛn nɔmal wan dɛn kin pik am we dɛn nid fɔ gɛt ay kemikal rɛsistɛns ɔ sɔlid strɔkchɔ.

Wetin na di difrɛns bitwin fri-fom ɛn Celuka PVC bod?

Fri-fom bod jɔs gɛt mɔ yunifom sɛlular strɔkchɔ ɛn dɛn kin yuz am bɔku bɔku wan fɔ print ɛn sayn. Celuka bod gɛt wan densa ɔda skin ɛn dɛn kin pik am fɔ kabinɛt, fɔnicha ɛn aplikeshɔn dɛn we nid fɔ gɛt mɔ sɔfays hadnɛs.

Wetin na kɔ-ɛkstrud PVC fom bod?

Ko-ekstrud bod gɛt fom kɔr bitwin had PVC sɔfays layers, we de gi wan smol sɔfa ɛn inkris rɛsistɛns to skrat ɛn mɛkanikal damej.

Us tik tik dɛn de?

HSQY de saplae rigid PVC fom bod frɔm lɛk 1mm to 35mm. Faynal avaylabl dipen pan density, sheet saiz, kala ɛn prodakshɔn we.

Us sheet saiz dɛn de?

Standart saiz dɛn inklud 915 × 1830mm, 1220 × 2440mm, 1560 × 3050mm ɛn 2050 × 3050mm. Dɛn kin ebul fɔ evalyu di dimɛnshɔn dɛn we dɛn mek fɔ kɔt bak.

18mm PVC fom bod fit fo kabinet?

Yu kin yuz wan aprɔpriet 18mm midul- ɔ ay-dɛnsity gred fɔ kabinɛt kɔmpɔnɛnt dɛn. Skru ritɛnshɔn, hinj, span, lod ɛn sɔpɔt strɔkchɔ fɔ tɛst.

PVC fom bod nɔ de mek wata pas?

Di bod gɛt smɔl wata absɔpshɔn ɛn i nɔ de swel lɛk MDF we dɛn nɔ trit. Di kabinɛt, wɔl ɔ panɛl instɔleshɔn we dɛn dɔn dɔn, na wata nɔmɔ we dɛn mek di jɔyn, fastɛns ɛn intafɛs kɔrɛkt wan.

Yu tink se yu kin yuz PVC fom bod na do?

Yu kin yuz gred dɛn we dɛn dɔn pik we dɛn kɔl UV-stabilized na do. Standart indo bod nɔ fɔ ɔtomɛtik diskrayb se i fayn fɔ lɔng tɛm ɛkstirian ɛksplɔshɔn.

Yu tink se dɛn kin print PVC fom bod dairekt wan?

Yɛs. Gret dɛn we fit kin sɔpɔt flatbed UV ɛn skrin printin. di ink adheshon, curing, kala riprodakshכn εn surface kompitibiliti fכ tεst fכs.

Yu tink se PVC fom bod kin bi CNC routed?

Yɛs. I kin bi CNC routed, engraved ɛn mil. Kata jɔyometri, spindl spid, fid rit ɛn dip fɔ ɛni pas fɔ mach to di bod density ɛn tiknes.

Yu tink se dɛn kin drɔ ɛn skru PVC fom bod?

Yɛs. Grɛd dɛn we gɛt ay density jɔs de gi impɔtant skru ritɛnshɔn. Dɛn fɔ tɛst di payɔt ol dɛn, di edj distans, di was mashin dɛn ɛn di lod dɛn we dɛn de op fɔ.

Us adeziv dɛn kin yuz fɔ PVC fom bod?

Yu kin yuz kɔmpatibl PVC siment, kɔntakt adeziv ɔ strɔkchɔral adeziv dipen pan di jɔyn ɛn di tin we dɛn dɔn bon. Adheshon fɔ tɛst pan wan prodakshɔn sampul.

Yu tink se dɛn kin kɔt PVC fom bod wit laser?

Kɔnvɛnshɔnal lɛsa kɔt jɔs nɔ kin fayn bikɔs PVC we dɛn ɔt kin rilis kɔrosiv klorin-kɔntinɛnt fyum. Mɛkanikal kɔt ɔ CNC routin na in dɛn kin lɛk fɔ yuz.

PVC fom bod nɔ de faya?

Nɔ jenɛral PVC fom bɔd nɔ fɔ diskrayb as fayapruf. Faya pefɔmɛns fɔ gɛt sɔpɔt bay wan tɛst ripɔt we de kɔba di ɛksaktɔl gred, density ɛn tiknes.

Yu tink se PVC fom bod gɛt fɔmaldehayd?

PVC fom bod nɔ de mek wit fɔmaldehayd-bɔnd wud fayv. Eni spεsifi k restricted-substance klem fכ stil kכnfכm yuz dכkumentεshכn fכ di εksakεt fכmyuleshכn.

Yu tink se PVC fom bod kin risaykul?

PVC fom bod kin teknik wan risaykul, bɔt di aktual risaykul dipen pan lokal kɔlɛkshɔn, sɔt, fɔmyulashɔn, sɔfayz film, printin, adeziv ɛn kɔntaminɛshɔn.

Yu tink se dɛn kin yuz PVC we dɛn dɔn risaykul na fom bod?

Di bɔd strɔkchɔ dɛn we dɛn dɔn pik kin gɛt tin dɛn we dɛn dɔn risaykul. Risaykul kɔntinyu kin afɛkt kɔlɔ, density, surface kwaliti, mɛkanikal kɔnsistɛns ɛn rigyuleted aplikeshɔn dɛn.

Wetin na di minimum ɔda kwantiti?

Di standad MOQ fɔ dis prodak na lɛk 3 mɛtrik tan. Kɔlɔ, dens, big saiz ɔ miks spɛsifikɛshɔn dɛn we dɛn kɔstɔmayt kin nid difrɛn kwantiti.

Yu tink se fri sampul dɛn de?

Fri stok sɛmpul dɛn kin de fɔ chɛk tik, dɛnsiti, sɔfays, printin ɛn mashin. Na di pɔsin we bay di tin kin pe fɔ di freyt we dɛn kin yuz fɔ kɛr pipul dɛn go.

Wetin na di prodakshɔn lida tɛm?

Stɛndad prodakshɔn nɔmal fɔ tek lɛk 15-20 dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, kwantiti, pak ɛn dipɔsit.

Us infɔmeshɔn dɛn nid fɔ gɛt fɔ kot?

Gi di aplikeshɔn, tiknes, density, sheet saiz, kɔlɔ, finish, printin ɔ mashin we, kwantiti, pak, dɛstineshɔn pɔt ɛn tɛst standad dɛn we dɛn nid.

Get wan Kastom PVC Foam Bod Kot

Bɔt HSQY Plastik Grup

Changzhou Huisu Qinye Plastic Group Co., Ltd. de saplae rigid PVC fom bod ɛn ɔda plastic sheet fɔ sayn, printin, kabinɛt, fɔnicha, intɛriɔ dɛkɔreshɔn ɛn industrial fabrikeshɔn.

HSQY de sɔpɔt distribyushɔn, sayn mek, fɔnicha manifakta, kɔnstrɔkshɔn-matirial saplay ɛn plastic fabricatɔ wit sampul ɛvalueshɔn, kɔstɔmayz prodakshɔn, inspekshɔn ɛn ɛkspɔt pak.

Rikwest fɔ Kot ɛn Sampul