PET Tɛmofɔmin

Wetin Na PET Tɛmofɔmin Shit?

PET thermoforming sheet matirial s na rigid plastic sheet matirial s ɔ rol dɛn we dɛn mek fɔ ɔt, fɔm oba mold ɛn kol insay finish pakej ɔ industrial kɔmpɔnɛnt dɛn. di kכmכn mεtכd dεm fכ fכm inklud vεkyum fכm, prεshכn fכm, pכlכg-εsist fכm εn mach-mכld fכm.

HSQY de saplae PET sheet matirial matirial fɔ thermoforming kɔmni dɛm, fud pak manifakta dɛm, blista pak kɔnvɔta dɛm, printin kɔmni dɛm, industrial kɔmpɔnɛnt prodyusɔ dɛm ɛn ɔlsay distribyushɔn dɛm.

Di matirial opshɔn dɛn we de inklud APET , RPET , PETG , GAG ɛn PET/PE laminated sheet matirial . Ɛni matirial gɛt difrɛn fɔm, klia, ɔt rɛsistɛns, silin, risaykul-kɔntinɛnt ɛn kɔst kwaliti dɛn.

Dis kategori de fos mɔ pan PET sheet matirial ɛn rol matirial dɛn we dɛn de gi as raw matirial fɔ dawɔnstrim tɛmfɔmin. Dɛn kin tɔk bɔt it we dɔn dɔn trey dɛn , klamshɛl ɛn kɔntena dɛn sɛpret wan akɔdin to di prɔjek.

PET Tɛrmofɔmin Shit Spɛsifikeshɔn dɛn

Di tebul we de kam biɛn ya de sɔmariz kɔmɔn PET tɛmɔfɔmin sheet matirial opshɔn dɛn. Eksakt spesifikeshɔn dɛn dipen pan di matirial we dɛn dɔn pik, fɔm dip, finish prodak ɛn ɔda kwantiti.

PET Matirial dɛn we de fɔ Tɛmofɔm

PET na matirial famili pas wan singl sheet matirial gred. Fɔ pik di kɔrɛkt PET strɔkchɔ impɔtant fɔ stebul fɔm, finish-pat pefɔmɛns ɛn kɔst kɔntrol.

Di wan dɛn we de bay kin rivyu HSQY dɛn    APET sheet matirial na di s,    RPET sheet matirial na di s,    PETG sheet matirial na di s,    GAG sheet matirial na di s,    PET/PE laminat sheet matirial s ɛn    CPET sheet matirial na di s.

Ki Bɛnifit dɛn fɔ PET Tɛmofɔmin Shit dɛn

• Ay prodak visibiliti: Klia APET , RPET , PETG ɛn GAG sheet matirial s sɔpɔt transparent rital ɛn it pak.

• Yuzful rigiditi: PET sheet matirial s kin gi strɔkchɔral sɔpɔt wit rili lɔw matirial wet.

• Gud impak pefɔmɛns: Gred dɛn we dɛn pik fayn fayn wan nɔ kin krak we dɛn de fɔm, handel ɛn transpɔt.

• Tεmכfכm vεsatiliti: PET sheet matirial s kin fכm insay shalo trey dɛn , dip kכva, blista, klamshεl, lid εn insεt.

• Surface customization: Anti-fog, anti-statik, mat, silikon, anti-blɔk ɛn print-trit gred dɛn de.

• Di tin dɛn we yu kin pik fɔ pak it: Dɛn kin gi gred fɔ kɔntakt it fɔ di aplikeshɔn dɛn we fit fɔ yuz we dɛn dɔn tɔk bɔt am bifo dɛn mek am.

• Risaykul-kɔntinɛnt opshɔn dɛn: RPET strɔkchɔ dɛn kin sɔpɔt prɔjek dɛn we nid post-kɔnsuma ɔ risaykul PET kɔntinyu.

• Rol ɛn sheet matirial saplae: Dɛn kin kɔnfigyut matirial fɔ kɔntinyu ɔtomɛtik fɔm layn ɔ kɔt- sheet matirial ikwipmɛnt.

• Kastom dimɛnshɔn: Tik, waid, rol dayamita, sheet matirial lɔng ɛn pak kin ajɔst fɔ prodakshɔn rikwaymɛnt.

Aplikeshɔn fɔ PET Tɛmofɔmin Shit dɛn

Fud tre s ɛn Kɔntinɛnt dɛn

Dɛn kin yuz klia PET sheet matirial s bɔku bɔku wan fɔ mek trey dɛn ɛn kɔntena fɔ frut, vɛjitebul, bekeri prodak, salad, deli it, mit, sifud, kɔnfɛkshɔn ɛn kol prodak.

Di kɔrɛkt matirial dipen pan if di paket yuz hinged lid, sɛpret lid, strɛch film, ɔt-siling film ɔ ɔda klos sistɛm.

Klamshɛl we dɛn kin pak

APET ɛn RPET sheet matirial s kin thermoformed insay hinged klamshɛl kɔntena fɔ bɛri, tomato, bekeri prodak, hadwae, ilɛktroniks ɛn kɔshɔma guds.

Di hinj trɛnk, kloz dizayn, stak, ventileshɔn ɛn anti-fɔg pefɔmɛns fɔ tink bɔt we dɛn de pik di matirial.

Blister Packaging we dɛn kin yuz fɔ mek tin dɛn

PET sheet matirial s kin yuz fɔ rital blista, fes-sil blista, blista we trɔp, slayd blista ɛn protɛktiv pak fɔ ilɛktronik, hadwae, kɔsmɛtik, steshɔnari ɛn kɔshɔma prɔdak.

Prodakt dip, ɔndakat, flɛnch wit, kad-siling we ɛn anti-statik rikwaymɛnt dɛn de inflɔws di aprɔpriet sheet matirial gred.

Di tin dɛn we gɛt fɔ du wit dis de tru HSQY’s    PET blista pak sheet matirial    kategori.

Mit ɛn Sifud Pakɛj

PET εn PET/PE sheet matirial s kin tεmכfכm to rigid trey dɛn fכ fresh mit, prכsεs mit, pכltri, fish εn sifud.

Projek we nid fɔ silin wit ɔt fɔ mach di tre sɔfays wit di kɔrɛkt lidding-film sial layt. High-barrier MAP ɔ VSP aplikeshɔn dɛn kin nid fɔ gɛt EVOH-based multilayer strɔkchɔ pas standad mono- PET .

Mɛdikal ɛn Ɛlthkɛr Pakɛj

PETG ɛn sɛlɛkɛt PET sheet matirial s kin yuz fɔ divays trey dɛn , protɛktiv insɛt ɛn mɛdikal pak kɔmpɔnɛnt usay klia, impak rɛsistɛns ɛn dimɛnshɔnal kɔnsistɛns impɔtant.

Medikal projɛkt dɛn nid aplikeshɔn-spɛsifi k validɛshɔn fɔ sterilayzeshɔn, klin, bayɔkɔmpatibiliti ɛn rigyuletɔri kɔndishɔn dɛn.

Ilɛktronik ɛn Indastrial Trey dɛn

Anti-statik ɔ kɔnduktiv PET sheet matirial gred dɛn kin fɔm insay kɔmpɔnɛnt trey dɛn , handel trey dɛn , protɛktiv insɛt ɛn pak fɔ ilɛktronik asɛmbli.

Di sɔfayz rɛsistɛns we dɛn nid, klin, dimɛnshɔnal tolɛreshɔn ɛn ilɛktrɔstatik-dischaj pefɔmɛns fɔ spɛsifa bifo dɛn prodyuz.

Ritayl Displei ɛn Protɛktiv Kɔva dɛn

PETG , GAG ɛn tik APET sheet matirial s kin fɔm insay transparent displei kɔva, pɔynt-ɔf-sɛl kɔmpɔnɛnt, prodak haus, mashin kɔva ɛn industrial ɛnklɔzhɔ.

Aw fɔ Pik di Rayt PET Tɛmofɔmin Shit

Difayn di Prodak we dɔn dɔn

Start bay we yu no if di matirial go fɔm to it tre , lid, klamshɛl, blista, industrial tre , displei kɔva ɔ ɔda prɔdak. Difrɛn aplikeshɔn dɛn nid difrɛn klia, stiffness, impak, surface ɛn siling prɔpati.

Kɔnfɔm di Fɔm Dip

Shalo prodakt kin yuz standad APET ɔ RPET bɔku tɛm. Dip kaviti, smɔl kɔna, at fɔ drɔ rɛshɔn ɔ kɔmpleks shep kin bɛnifit frɔm PETG , GAG , plɔg-ɛsist fɔm ɔ wan modifyed mold dizayn.

Pik di Kɔrɛkt Tiknɛs

Matirial tiknes fɔ pik akɔdin to di fɔm dip, finish wɔl tik, prodak lod, stak rikwaymɛnt ɛn ɛkspɛkt transpɔt kɔndishɔn.

fכ sεlekt כnli bay di כrijinal sheet matirial tik kin bi mislead biכs di mεtirial de tכn as i de strεch kכros di mכld.

Ditarmin If I Nid fɔ Sial wit Ɔt

Standard PET nɔ de sial ɔtomɛtik wan to ɛvri liding film. Fɔd we dɛn dɔn sidɔm wit ɔt trey dɛn kin nid PET/PE , wan say we dɛn kɔt ɔ wan lid film we dɛn mek spɛshal fɔ PET .

Kɔnfɛm di Tɛmpratura we dɛn nid fɔ du di Savis

Standart transparent APET na jεnarali sεlekt fכ ambiεnt, frij εn kכvεshכnal fכd pak pas fכ ovenable yus.

Aplikeshɔn dɛn we involv ɔt filin, pastɔrayzeshɔn, maykrowev, kɔvɛnshɔnal ɔvin ɔ lɔng tɛm ay-tɛmpracha ɛksplɔshɔn fɔ evalyu yuz CPET , ɔt-rɛsistant PP ɔ ɔda fayn matirial.

Identify di Surface Tritment we dɛn nid

Fɔ pak it we dɛn put na frij kin nid fɔ gɛt tritmɛnt fɔ mek dɛn nɔ gɛt fɔg. Di tin dɛn we dɛn print kin nid fɔ gɛt korona tritmɛnt. Fɔm ɔtomɛtik kin nid silikon ɔ anti-blɔk tritmɛnt. Ilɛktronik pak kin nid fɔ du anti-statik ɔ kɔnduktiv.

Spesify Risaykul Kɔntinɛnt

Baya dɛn we nid RPET fɔ tɔk bɔt di risaykul-kɔntinɛnt pasɛnt, optik ɛkspɛkteshɔn, it-kɔntakt kɔndishɔn, kɔlɔ tolɛreshɔn ɛn dɛstineshɔn-maket rikwaymɛnt.

PET Tɛmofɔmin Prɔses

1. Matirial sɛlɛkshɔn: Dɛn kin pik di PET gred, tiknɛs, wit ɛn sɔfayz tritmɛnt akɔdin to di prodak we dɔn dɔn.

2. Shit lod: Dɛn kin lod wan rol ɔ kɔt sheet matirial insay di tɛmfɔmin mashin.

3. Hεt: di sheet matirial de hεt te i rich wan fayn fכm kכndishכn we nכ de kכl fכ kכlכs pasmak, sagging כ surface damej.

4. Fɔm: Vaykum, prɛshɔn, wan plɔg ɛp ɔ mach mold dɛn de drɔ di tin we dɛn dɔn ɔt insay di shep we dɛn nid.

5. Kul: Dɛn kin kol di pat we dɔn fɔm we dɛn de ol am agens di mold fɔ mek in dimɛnshɔn dɛn stebul.

6. Demolding: Dɛn kin rilis di pat bay we dɛn de yuz mold draft, air ejection ɔ mɛkanikal ɛp.

7. Trim: Dɛn kin kɔt di wɛb we dɛn dɔn fɔm yuz stɛl-rul day, panch tul, mach-mɛtal tul, CNC ikwipmɛnt ɔ ɔda trim sistem.

8. Inspekshɔn: Dɛn kin chɛk di pat dɛn we dɔn dɔn fɔ si if di wɔl tik, if i klia, if dɛn dimɛnshɔn, krak, wɛb, haz ɛn sɔfays dɛfɛkt.

9. Pak: Dɛn kin put di pat dɛn nɛst, kɔnt, bag, bɔks ɛn palet fɔ shipmɛnt.

Impɔtant tin dɛn we yu fɔ tink bɔt fɔ mek di Tɛmofɔmin Prɔses

Di Tɛmpratura fɔ di Shit

Di korekt fom kondishon dipen pan di PET gred, tiknes, hitin sistem, saikl spid en dro rεshכ. If yu ɔt pasmak, i kin mek yu sag, stik, kristaliz, haz ɔ wik eria, we if yu ɔt pasmak, i kin mek di ditel nɔ fayn ɛn krak.

Matirial Mɔstɔ

PET matirial dεm kin abzכp mכsichכ we dεn de stכr. If dɛn nid fɔ drɛy bifo tɛm, i dipen pan di PET gred, sheet matirial istri, di kɔndishɔn fɔ stɔrɔj ​​ɛn di tɛmfɔmin prɔses.

If bɔbul, mak dɛn we de ɔp ɔ we nɔ klia, di wan dɛn we de bay fɔ rivyu di matirial stɔrɔj, mɔstɔ ɛksplɔshɔn ɛn di drying rɛkɛmɔndeshɔn fɔ di patikyula gred.

Dizayn fɔ Mold

Mold dip, kɔna rayus, draft angle, vent-hol saiz, sɔfayz finish, kol ɛn kaviti spays ɔl de inflɔws matirial distribyushɔn ɛn finish-pat kwaliti.

Plɔg-Asist Dizayn

Plɔg ɛp kin mek di wɔl-tiknɛs distribyushɔn bɛtɛ na dip kaviti dɛn. Plɔg matirial, tɛmpracha, spid, shep ɛn kliarens fɔ mach to di mold ɛn PET gred.

Taym fɔ Kɔl

If yu nɔ kol fayn, i kin mek yu nɔ chenj, i kin shrink ɛn i nɔ kin stebul. If yu kol pasmak, i de mek di saykl tɛm ɛn di kɔst fɔ prodakshɔn go ɔp.

We yu de handle di Wɛbsayt

Rol flatnɛs, wayndin tɛnsiɔn, kɔr alaynɛshɔn, sheet matirial kɔl ɛn statik kin afɛkt ɔtomɛtik fidin ɛn indeks akkuracy.

Kɔmɔn PET Tɛmofɔmin Prɔblɛm dɛn

PET Tɛrmofɔmin Rol dɛn vs. Kɔt Shit dɛn

Bayers we nid rol matirial kin rivyu HSQY’s    PET shit rol.

Fɔnishɔnal PET plastic sheet we dɛn mek Opshɔn dɛn

Anti-Fɔg PET plastic sheet we dɛn mek

Anti-fog tritmɛnt de ɛp fɔ ridyus smɔl smɔl wata drɔp dɛn we kin mek di prɔdak nɔ si di tin dɛn we dɛn dɔn pak na frij.

Anti-fog durability fɔ bi evaluate akɔdin to stɔrɔj ​​tɛmpracha, it mɔstɔ, kɔtin sayd ɛn pak durayshɔn.

Si HSQY in dɛn    anti-fɔg PET sheet matirial s.

Anti-statik PET plastic sheet we dɛn mek

Anti-statik tritmɛnt dɛn de ɛp fɔ ridyus di dɔst atrakshɔn ɛn statik akyumyuleshɔn we dɛn de kɔnvɔyt, stɔrɔj ​​ɛn handel kɔmpɔnɛnt.

Silikɔn-Kɔt ɛn Anti-Blɔk PET

silikon εn anti-blכk tritmεnt kin impruv sheet matirial separeshכn, rol unwinding, denest εn כtomatik fכd.

Di tritmɛnt lɛvɛl fɔ balans wit di tin dɛn we dɛn nid fɔ print, kɔt ɛn sial.

Korona we dɛn dɔn trit PET plastic sheet we dɛn mek

Korona tritmɛnt de mek di sɔfayz ɛnaji bɔku ɛn i kin mek di ink, kɔtin ɛn adhesive wet fayn. Di wan dɛn we de bay fɔ spɛsifa di sayd we dɛn trit ɛn di sɔfa-tɛnshɔn lɛvɛl we dɛn nid.

Mat ɛn Tekstɔr PET plastic sheet we dɛn mek

Mat ɛn tɛkstɔr sɔfays kin ridyus glare, impɔtant apinans ɔ gi spɛshal taktil ifɛkt fɔ rital ɛn industrial prodak.

Food-Contact PET Tɛmofɔmin Shit dɛn

Fɔd-kɔntakt PET gred dɛn kin saplae fɔ it trey dɛn , klamshɛl, lid, bekɛri kɔntena, prodɔkt pak ɛn ɔda aplikeshɔn dɛn.

Di wan dɛn we de bay fɔ tɔk klia wan se:

• Di kayn it we dɛn kin it

• Dairekt ɔ indayrɛkt it kɔntakt

• Kontakt tɛm

• Stɔrej ɛn yuz tɛmpracha

• Frij, frɔzɛn, ɔt-fil ɔ rihit kɔndishɔn

• Fɔd we gɛt fat, asid, wata ɔ dray it

• Target kɔntri ɔ rijyɔn

• Diklareshɔn ɔ maykreshɔn tɛst we dɛn nid

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt dɛn

Kɔmplians fɔ kɔnfyus fɔ di ɛksaktɔ rɛsin fɔmyulashɔn, risaykul-kɔntinɛnt strɔkchɔ, kɔtin, adhesive ɛn finish pakej pas fɔ asum fɔ ɛvri PET sheet matirial .

PET Tɛrmofɔmin Shit Kwaliti Kɔntrol

Stebul sheet matirial kwaliti de ɛp thermoforming kɔmni dɛn fɔ mek dɛn kɔntinyu fɔ gɛt kɔnsistɛns ɔt, indeks, fɔm, trim ɛn finish-pat pefɔmɛns.

Di tin dɛn we gɛt fɔ du wit kwaliti-kɔntrol kin inklud:

• Matirial idɛntifikeshɔn ɛn fɔmyulashɔn

• Tik ɛn tik tolɛreshɔn

• Rol ɔ sheet matirial wit tolɛreshɔn

• Sheet flatness ɛn rol winding

• Transparency, haze ɛn glos

• Di kɔnsistɛns we di kɔlɔ dɛn gɛt

• Blak spat, jel, kristal poɛnt ɛn kɔntaminɛshɔn

• Surface skrat ɛn rol impreshɔn

• Korona ɔ kɔtin pefɔmɛns

• Anti-fog ɔ anti-statik pefɔmɛns we nid de

• Fɔm bihayvya ɛn di wɔl-tiknɛs distribyushɔn

• Packaging ɛn palet kɔndishɔn

PET plastic sheet we dɛn mek Sastaynabiliti ɛn Risaykul Kɔnsidɛreshɔn

PET dɛn kin gɛda ɛn risaykul am na bɔku makit dɛn, ɛn RPET sheet matirial kin inkɔrpɔret risaykul PET insay nyu pak ɛn thermoformed prodak.

Bɔt di risaykulbiliti fɔ wan finish thermoformed prodakt dipen pan mɔ pas di bays rɛsin.

Impɔtant tin dɛn na:

• Lokal kɔlɛkshɔn ɛn sɔt infrastukchɔ

• Matirial we klia ɔ we gɛt kɔlɔ

• Virgin ɔ risaykul kɔntinyu

• PETG ɔ ɔda kɔpɔliɛsta kɔntinyu

• PE silin layers

• Barɛri layers, kɔtin ɛn adeziv

• Lebul, ink ɛn fim dɛn we dɛn ataya

• Fɔd kɔntaminɛshɔn

• Minimum dimɛnshɔn dɛn we dɛn aksept bay we dɛn de sɔt fasiliti dɛn

Envayrɔmɛnt klem fɔ bi bay di kɔmplit pak strɔkchɔ ɛn di risaykul gayd fɔ di dɛstineshɔn makit.

Kastom PET Tɛmofɔmin Shit Opshɔn dɛn

HSQY de sɔpɔt kɔstɔmayz PET sheet matirial ɛn rol prɔjek fɔ thermoforming manifakta, fud pak kɔmni, distribyushɔn ɛn industrial kɔnvɔta.

• Kastom PET matirial tayp

• Kastɔm ​​vajin ɛn risaykul-kɔntinɛnt rɛsɛshɔn

• Kastom tik ɛn tolɛreshɔn

• Kastom rol wit ɛn wet

• Kastom sheet matirial lɔng ɛn wit

• Kla, tint ɔ opaque kɔlɔ dɛn

• Glossy, mat ɔ tɛkstɔr finish

• Anti-fɔg tritmɛnt

• Anti-statik ɔ kɔnduktiv tritmɛnt

• Silikɔn ɔ anti-blɔk tritmɛnt

• Korona tritmɛnt fɔ print

• Fim we de protɛkt pɔsin na wan ɔ ɔl tu di say dɛn

• PET/PE lamineshɔn ɔ silin layt

• Kastom kor ɛn rol dayamita

• Kastom katon ɛn palet pak

Pakɛj ɛn Intanɛshɔnal Shipin

PET plastic sheet we dɛn mek Rol Pakɛj

PET rol dɛn kin protɛkt wit rap film, kraft pepa, edj protɛkshɔn ɛn ɛkspɔt palet. Dɛn fɔ pik di rol ɔriɛnteshɔn ɛn di palet strɔkchɔ akɔdin to di rol wet ɛn di ikwipmɛnt fɔ ɔndo.

Pakɛj we dɛn kin kɔt-Shit

Kɔt sheet matirial s kin stak, rap, protɛkt wit kɔna bod ɛn pak pan ɛkspɔt palet. Protektiv film ɔ intaliv pepa kin tɔk bɔt fɔ sɛnsitiv sɔfays.

Di kwantiti fɔ lod di kɔntena dipen pan di matirial dɛnsiti, tiknɛs, di rol wit, di rol dayamita, sheet matirial dimɛnshɔn, di ayt fɔ palet ɛn di tin dɛn we dɛn nid fɔ go.

Wetin Mek Yu Pik HSQY as Yu PET Tɛmofɔmin Shit Spɔla?

• Bɔku PET matirial dɛn: APET , RPET , PETG , GAG , PET/PE ɛn CPET opshɔn dɛn de.

• Kastɔm ​​ɛkstrushɔn: Tik, wit, kɔlɔ, sɔfa ɛn rol kɔnfigyushɔn kin ajɔst.

• Fɔd pak ɛkspiriɛns: Matirial dɛn de fɔ trey dɛn , klamshɛl, lid, blista ɛn ɔda tin dɛn we dɛn kin pak.

• Fɔnshɔnal tritmɛnt dɛm: Dɛn kin tɔk bɔt anti-fɔg, anti-statik, silikon, anti-blɔk ɛn printin tritmɛnt dɛm.

• Virgin ɛn RPET saplae: Dɛn kin ebul fɔ evaluate difrɛn risaykul-kɔntinɛnt strɔkchɔ dɛn akɔdin to di prɔjek.

• Rol ɛn sheet matirial fɔmat: Matirial kin sɔpɔt ɔtomɛtik rol-fed layn ɛn kɔt- sheet matirial tɛmɔfɔm ikwipmɛnt.

• Sampul evalueshɔn: Dɛn kin arenj sampul fɔ fɔm, print, sial ɛn vijual-kwaliti tɛst.

• Ɛkspɔt sɔpɔt: Kastɔm ​​pak, paletayz ɛn intanashɔnal shiping opshɔn dɛn de.

• B2B kot sɔpɔt: Dɛn kin rivyu di spɛsifikɛshɔn dɛn akɔdin to di ikwipmɛnt, aplikeshɔn, target kɔst ɛn ɛni ia dimand.

Infɔmeshɔn we dɛn nid fɔ wan PET Tɛmofɔmin Shit Kɔt

Fɔ gɛt di kɔrɛkt kot fɔ di faktri, duya gi bɔku pan dɛn tin ya as yu ebul:

• Rikwayd PET tayp: APET , RPET , PETG , GAG , PET/PE ɔ ɔda strɔkchɔ

• Finished prodak ɛn aplikeshɔn

• Rikwayd sheet matirial tik ɛn tolɛreshɔn

• Rol wit ɔ kɔt- sheet matirial dimɛnshɔn

• Rol kor dayamita, maksimal dayamita ɛn maksimal wet

• Klia, tint ɔ opaque kɔlɔ

• Glos, mat ɔ tɛkstɔr sɔfays

• Anti-fɔg, anti-statik, silikon, anti-blɔk ɔ korona tritmɛnt

• Virgin ɔ risaykul-kɔntinɛnt rikwaymɛnt

• Tayp mashin we de mek thermoforming

• Fɔm dip ɛn prodak drɔin

• Vaykum, prɛshɔn ɔ plɔg-ɛsist fɔm we

• Print, kɔt, fold ɔ day-kɔt rikwaymɛnt

• Hɛt-siling ɛn lidding-film rikwaymɛnt dɛn

• Fɔd-kɔntakt ɔ rigyuletɔri rikwaymɛnt dɛn

• Estimated oda kwantiti ɛn ɛni ia yus

• Di we aw dɛn nid fɔ pak di tin dɛn

• Destination port ɔ di adrɛs fɔ di delivri

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET Tɛmofɔmin Shit dɛn

Wetin na di difrɛns bitwin PET sheet matirial ɛn PET tɛmɔfɔmin sheet matirial ?

PET thermoforming sheet matirial na in dɛn mek ɛn kɔntrol fɔ ɔt ɛn fɔm insay tri-dimɛnshɔnal prodak. Jɛnɛral PET sheet matirial kin bi fɔ print, fold, fɔ mek ɔ ɔda tin dɛn ɛn i nɔ kin gi di sem fɔm pefɔmɛns.

Wetin na di bɛst PET matirial fɔ standad it trey dɛn ?

Klia APET na tin we dɛn kin pik fɔ kɔvɛnshɔnal it trey dɛn bikɔs i de gi klia, rigiditi ɛn ikɔnomik tɛmfɔmin pefɔmɛns. RPET kin tink bɔt we dɛn nid fɔ risaykul kɔntinyu.

Us PET sheet matirial bεst fכ dip tεmכfכm?

PETG εn GAG dεn kin evaluate fכ dip כ mכr komplεks shep dεm. Di fainal selekshɔn dipen pan draw ratio, mold jɔyometri, tiknes, mashin tayp ɛn finish-prɔdakt rikwaymɛnt.

Yu kin yuz APET sheet matirial na ɔvin?

Standard transparent APET nɔ mek am fɔ kɔvɛnshɔnal ɔvin yus. Ovenable food trey dɛn nכmal wan nid CPET כ כda mεtirial we spεshal validet fכ di tεmprachכ we dεn nid.

Yu tink se PET thermoforming sheet matirial s kin bi maykrowev?

A PET sheet matirial nɔ fɔ diskrayb as maykrowev-sef pas dɛn dɔn tɛst ɛn apruv di ɛksaktɔl matirial strɔkchɔ, fɔm prodak, it lod, tɛmpracha ɛn ɔt tɛm.

PET sheet matirial nid fɔ drɛy bifo dɛn mek am fɔm?

Di tin dɛn we dɛn nid fɔ drɛy kin difrɛn bay PET tayp, sheet matirial prodakshɔn we, stɔrɔj ​​istri ɛn fɔm prɔses. Fɔ fala di tɛknikal rɛkɛmɔndeshɔn fɔ di gred we yu dɔn pik ɛn invɛstigat di mɔstɔ if bɔbul, haz ɔ sɔfayz mak dɛn apia.

Yu tink se PET sheet matirial kin saplae insay rol?

Yɛs. PET thermoforming sheet matirial kin saplae insay rol fɔ ɔtomatik fɔm layn dɛn. Di wan dɛn we de bay fɔ gi di wit, tik, di kɔr dayamita, di rol dayamita, di wet we di rol gɛt ɛn di tin dɛn we dɛn nid fɔ waynd.

Yu tink se PET sheet matirial kin saplae as kot sheet matirial s?

Yɛs. Cut sheet matirial s kin saplae fɔ tik-gej fɔm, protɔtayp, print, manual fɔm mashin ɛn aplikeshɔn dɛn we nid fiks sheet matirial dimɛnshɔn.

Yu tink se PET thermoforming sheet matirial kin bi ɔt sial?

di hεt siling dipכnt pan di PET surface εn lidding-film sialant layεr. PET/PE laminated sheet matirial s ɔ spɛshal kɔt PET strɔkchɔ dɛn kin nid fɔ rili tre siling.

Wetin na di difrɛns bitwin APET ɛn RPET ?

APET de diskraib amorphous PET sheet matirial , we RPET de aydentify PET sheet matirial we gɛt risaykul PET . Wan RPET sheet matirial kin stil gɛt amorphous strɔkchɔ bɔt i inklud wan spɛsifikɛd lɛvɛl fɔ risaykul kɔntinyu.

Wetin na di difrɛns bitwin APET ɛn PETG ?

APET na jεnarali sεlekt fכ kכst-εfεktiv klia pak εn kכvεshכnal fכm. PETG nכmal fכ gi izi fכm εn bεtε pεrformεns fכ dip כ mכr kכmpleks shep dεm bכt i kin gεt hכy mεtirial kכst.

Wetin na GAG sheet matirial ?

GAG na kɔmɔn wan PETG /A PET/PE TG kɔɛkstrud sheet matirial . di PETG כta layεr dεm de impruv fכm εn sכfayz bihayv, we di APET kכr de εp fכ kכntrכl mεtirial kכst.

Anti-fɔg PET sheet matirial fɔ ɔltɛm?

Anti-fog pefɔmans dipen pan di kayn tritmɛnt, di sayd we dɛn de kɔt, di humidity, tɛmpracha ɛn di tɛm we dɛn de kip am. Di wan dɛn we de bay fɔ tɛst di sheet matirial wit di aktual it ɛn pak kɔndishɔn.

Yu tink se dɛn kin print PET sheet matirial s bifo dɛn mek dɛn tɛmɔfɔm?

Yɛs. Dɛn kin print PET sheet matirial s dɛn we dɛn dɔn pik bifo dɛn fɔm, bɔt dɛn fɔ tink bɔt aw fɔ distɔrj di artwok, ink fleksibiliti, sɔfa tritmɛnt, fɔm dip ɛn rɛjista. Dɛn kin rikɔmɛnd fɔ mek dɛn tray fɔ mek prodakshɔn.

Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul fɔ pak it?

Dɛn kin yuz RPET strɔkchɔ dɛn we fit fɔ pak it we di matirial, risaykul-kɔntinɛnt sɔs ɛn kɔnstrɔkshɔn de fala di aplikebul dɛstineshɔn-maket rikwaymɛnt dɛn. Dɛn fɔ kɔnfyus di dɔkyumɛnt fɔ di rayt prɔdak.

PET thermoformed prodakt dem kin risaykul?

PET prodakt kin bi risaykul usay fayn kɔlɛkshɔn ɛn risaykul infrastukchɔ de. Aktual akseptans dipen pan kɔlɔ, lɛbl, kɔtin, PETG kɔntinyu, PE layers, kɔntaminɛshɔn ɛn lokal risaykul lɔ dɛn.

Wetin kin mek wayt mak afta PET tεmכfכm?

Wait mak kin kכmכt frכm strεs, strεch pasmak, lכw fכm tεmprachכ, shap mold kכna, kristalizεshכn כ mεtirial damej. Dɛn fɔ rivyu di hita sɛtin, di rayus, fɔm spid ɛn di matirial gred.

Wetin na di MOQ fɔ PET tɛmɔfɔmin sheet matirial s?

MOQ dipen pan di PET tayp, tik, wit, kɔlɔ, risaykul-kɔntinɛnt rεshɔn ɛn fכnshכnal tritmεnt. Standard klia spesifikeshɔn dɛn nɔmal fɔ gɛt mɔ fleksibul rikwaymɛnt pas kɔstɔm kɔlɔ ɔ kɔtin.

A kin aks fɔ PET sheet matirial sampul bifo a ɔda?

Yɛs. Dɛn kin tɔk bɔt sampul dɛn fɔ thermoforming, printin, ɔt siling, anti-fɔg, anti-statik ɛn vijual-kwaliti ɛvalueshɔn. Gi di tik, matirial ɛn aplikeshɔn we yu nid we yu de aks fɔ sɛmpul.

Us infɔmeshɔn dɛn nid fɔ rɛkɔmɛnd wan PET sheet matirial ?

Gi di prodak we dɔn, sheet matirial tiknes, rol ɔ sheet matirial saiz, fɔm dip, mashin tayp, savis tɛmpracha, siling rikwaymɛnt, sɔfayz tritmɛnt, ɛni ia dimand ɛn dɛstineshɔn makɛt.

Rikwest wan PET Tɛmofɔmin Shit Kɔt

Yu de luk fɔ PET thermoforming sheet matirial manifakta, APET rol saplay, RPET sheet matirial ɔlsay ɔ kɔstɔm PET/PE matirial fɔ pak it?

Kɔntakt HSQY fɔ aks fɔ matirial rɛkɛmɔndeshɔn, tɛnki spɛsifikɛshɔn, sampul, kɔstɔm dimɛnshɔn, faktri prayz ɛn intanashɔnal shiping infɔmeshɔn.

       Rikwest fɔ kot di prayz