High-kwaliti PET PE Laminated fɔ Tɛmofɔmin Ɛn Fɔd Pakɛj

PET/PE Laminated Thermoforming Film fɔ Fɔd Pakɛj

HSQY de mek klia PET/PE laminated thermoforming film fɔ it trey, fɔm-fil-sil pak, fresh mit, fish, sifud, chiz, delicatessen prodak ɛn ɔda chilled-fud aplikeshɔn dɛn.

Di film de kam togɛda wan rigid PET-based fɔm layt wit wan polyethylene siling layt. Di PET layt de gi transparency, stiffness, impak resistans ɛn thermoforming pefɔmɛns, we di PE layt de gi ɔt-siling kapabiliti, fleksibiliti ɛn mɔstɔ resistans.

Di fichu PET/PE laminated film de insay wan totɛl tiknɛs rɛnj we na lɛk 0.23mm to 0.28mm. I de saplae insay klia rol fɔm wit kɔstɔmayz wit, rol dayamita, rol wet ɛn ɛni wan pan 3-inch ɔ 6-inch kɔr.

Standard PET/PE na di fɔs wan we dɛn pik fɔ rili thermoforming ɛn PE-kɔmpatibl ɔt silin. Prodakt we nid difayn ay ɔksijɛn barɛri, modifyed-atmosfɛs shelf layf ɔ aroma protɛkshɔn kin nid PET/EVOH/PE ɔ ɔda ay-baria strɔkchɔ we dɛn dɔn tɛst.

HSQY kin kɔstɔmayz di PET tiknes, PE silin layt, film wit, sɔfa tritmɛnt, anti-blɔk lɛvɛl, anti-fɔg pefɔmɛns, kɔlɔ, weld-sil pefɔmɛns ɛn izi-pil bihayvya akɔdin to di kɔstɔma in pak ikwipmɛnt ɛn prodak rikwaymɛnt.

Rikwest PET/PE Film Prayz    Rikwest Tɛmofɔmin Sampul dɛn

PET/PE Tɛmofɔmin Film Vidio

Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY PET/PE laminated films, rol prodakshɔn, thermoforming pefɔmɛns ɛn fud-pak aplikeshɔn.

Wetin Na PET/PE Laminated Tɛmofɔmin Film?

PET/PE laminated thermoforming film na wan multilayer rigid ɔ semi-rigid pakej matirial we dɛn mek wit wan PET-based strɔkchɔral layt ɛn wan polyethylene heat-sealing layt.

di PET layt de fכm di bכdi fכ wan trey כ bכtכm wεb. I de gi klia, dimɛnshɔnal sɔpɔt ɛn sufayf rigiditi fɔ ay-spid tɛmfɔmin ɛn fɔm-fil-sil prodakshɔn.

di PE layεr nכmal fכ posishכn na di fכd-kכntakt εn sial sayd. I de alaw di pakej we dɛn dɔn fɔm fɔ sial wit wan kɔmpitabl PE-sialant lidding film.

PET/PE laminated film na in dɛn kin yuz as di bɔt wɛb insay ɔrizɔntal fɔm-fil-sil sistɛm dɛn. di wεb de hεt, fכm insay kכva, fulכp wit di prכdak εn sial wit wan tכp film durin wan kכntinyu fכ pak.

PET/PE nɔ fɔ kɔnfyus wit fleksibul PET/PE paus fim ɔ wan tin PET/PE lid fim. Dis prodakt na disayn fɔs as rigid ɔ sɛmi-rigid fɔm wɛb.

PET/PE Laminated Film Imej dɛn

PET/PE Laminated Film Spɛsifikeshɔn dɛn

Faynal strɔkchɔ, tɔtal tiknes, individyual-layer tiknes, wit tolɛreshɔn, rol dayamita, wayndin dairekshɔn, siling sayd ɛn it-kɔntakt rikwaymɛnt dɛn fɔ kɔnfɔm insay wan aprɔv spɛsifikɛshɔn bifo prodakshɔn.

Aw di PET ɛn PE Lay dɛn de Wok

PET Fɔm Layer

Di PET-based layt de gi transparency, rigidity, tensile strength, impact resistance ɛn di strɔkchɔral bɔdi we nid fɔ mek wan it trey ɔ bottom wɛb.

PE Siling Layer we de mek yu fil

Di polyethylene layt de gi wan ɔt-sial sɔfays ɛn kɔntribyut fleksibiliti, mɔstɔ rɛsistɛns, ɔt tak ɛn kɔntaminɛshɔn tolɛreshɔn.

Tay ɔ Lamineshɔn Layer

wan tay rεsin כ adhesive kin yuz fכ mek rilibul intalayεr adheshon bitwin PET εn PE. di bond strכng fכ de stebul afta i fכm, sial, kol εn stכr.

Opshɔnal EVOH Barɛri Layer

EVOH kin ad we di paket nid lכw כksijεn transmishכn, impruv aroma rεtεnshכn כ mכr stebul modifyed-atmosfεr kכndishכn.

EVOH pefomans de difrεn akɔdin to in gred, tik, humiditi, tεmprachכ εn protεkshכn frכm adjasent layεr dεm.

PET/PE vs. PET/EVOH/PE Tɛrmofɔmin Film

Ki Ficha dɛn fɔ PET/PE Tɛmofɔmin Film

Ay Transparency we pɔsin kin gɛt

Klia PET de mek pɔsin si di prɔdak ɛn i de alaw di wan dɛn we de bay fɔ inspɛkt di we aw di it we dɛn pak de luk, di kɔlɔ ɛn di kwaliti.

Tɛmofɔmin we pɔsin kin abop pan

Di rigid PET layt de gi wan stebul fɔm bɔdi fɔ shalo trey ɛn pak kaviti dɛn we di itin profayl ɛn mold dizayn kɔrɛkt wan mach.

PE-Kɔmpatibl Silin

Di PE surface kin mek wan strɔng weld sil ɔ kɔntrol izi-pil sil wit wan kɔmpitabl PE-sial lidding film.

Mɔstɔ Resistɛns

di PE layt de kכntribyut rεsistεns to mכsichכ-vapour transmishכn εn i de εp fכ protεkt di sil εria insay chill-fud aplikεshכn.

Impekt ɛn Handling Pɔfɔmɛnshɔn

PET de gi yusful impak trɛnk ɛn dimɛnshɔnal stebiliti we dɛn de fɔm, fil, sial, transpɔt ɛn rital hanlin.

Kastom Fɔnkshɔn Opshɔn dɛn

Anti-fog, anti-blɔk, izi-pil, weld-sil, kɔstɔmayz kɔlɔ ɛn ay ɔksijɛn-baria opshɔn dɛn kin evalyu fɔ difrɛn pak sistɛm dɛn.

Tɛmofɔmin ɛn Fɔm-Fil-Sil Prɔsesin

Film Hɛtin

Di PET/PE wɛb de ɔt te i rich di fɔm winda we di PET gred we dɛn dɔn pik ɛn di tɔtal tiknɛs nid.

Wan yunivasal fɔm tɛmpracha nɔ fɔ aplay to ɛvri strɔkchɔ. Di hita zon, di tɛm we dɛn de de, di wɛb spid ɛn di kɔndishɔn we di ples de kin afɛkt di kɔrɛkt sɛtin.

Fɔmeshɔn fɔ di Kaviti

Vaykum, kɔmprɛsd ɛya ɔ plɔg ɛp de drɔ di fim we dɔn ɔt insay di mold fɔ mek di trey ɔ paket kaviti we dɛn nid.

Fɔ Filin Prodak

di kaviti dεm we fכm dεn kin fulכp wit mit, fish, chiz כ כda prכduk bifo dεn sial dεm.

Vaykum ɔ Gas Flushing

Dipen pan di we aw dɛn mek di paket, dɛn kin pul di briz ɔ chenj am wit wan kɔntrol modifyed-atmosphere gas miksɔp bifo dɛn sial di lid.

Hɛt Silin

Wan kɔmpitabl tɔp film de sial to di PE sɔfays yuz kɔntrol tɛmpracha, prɛshɔn ɛn dwɛl tɛm.

Fɔ Kɔt ɛn Separet

Dɛn kin kɔt di pak dɛn we dɛn sial ɛn separet dɛn to di rital ɔ distribyushɔn fɔmat we dɛn nid.

Fɔm Dip ɛn Tiknɛs Sɛlɛkshɔn

Di fichu 0.23-0.28mm film na jɛnɛral posishun fɔ rili tin thermoforming aplikeshɔn dɛn. Dip trey, shap kɔna ɔ ebi prɔdak kin nid difrɛn tɔtal tik ɔ layt strɔkchɔ.

Weld-Seal ɛn Izi-Pil Opshɔn dɛn

Di we aw di sil de biev dipen pan di bɔt wɛb, di tap fim, di silin tɛmpracha, prɛshɔn, di tɛm we i de de, di flɛnch klin ɛn di kɔntaminɛshɔn we di prɔdak gɛt.

Oksijɛn ɛn Mɔstɔ Barɛri Pɔfɔmɛnshɔn

Ɔksijɛn Transmishɔn Rɛt

כksijεn transmishכn rεt de mכsu di כksijεn we de pas tru wan film כnda spεsifi k tεmprachכ εn humiditi kכndishכn dεm.

di OTR valyu dεm we lכw de sho se i gεt bכku rεsistεns to כksijεn transmishכn. Di rizɔlt fɔ ripɔt wit di tɛst we, di film tik, tɛmpracha ɛn rilitiv humiditi.

Wata-Vapor Transmishɔn Rɛt

Wata-vapo transmishɔn rit de mɛzhɔ di amɔnt ɔf mɔstɔ vapour we de pas tru di film ɔnda difayn tɛst kɔndishɔn.

Di PE siling layt de kɔntribyut yusful mɔstɔ rɛsistɛns, bɔt di fayn WVTR dipen pan di ɔl strɔkchɔ ɛn di tɔtal tiknɛs.

Pakɛj-Lɛvɛl Barɛri

Shelf layf dipen pan mɔ pas di bottom film. Di lidding film, di sil integriti, pakej jɔyometri, gas miksɔp, prodak respirashɔn ɛn stɔrɔj ​​tɛmpracha ɔl de afɛkt fayn pefɔmɛns.

Aplikeshɔn fɔ PET/PE Fɔd Pakɛj Film

Fresh Mit we dɛn kin pak

PET/PE film kin thermoformed insay klia bottom pak fɔ bif, bɔd, bɔd, sosish ɛn prɔses mit.

di barεri strכkchכ fכ pik akɔdin to di mit kכla, di shelf layf we i nid, di gas miksכp, drip lεvεl εn stכrej kכndishכn.

Fish ɛn Sifud Pakɛj

Di aplikeshɔn dɛn na fish filɛt, smok fish, shɔɛl fish ɛn sifud we dɛn dɔn pripia. Dɛn fɔ ebul fɔ evaluate di pankchɔ rɛsistɛns, likwid kɔntɛnshɔn, ɔda barɛri ɛn lɔw-tɛmpracha pefɔmɛns.

Chiz we dɛn de pak

PET/PE bottom webs kin yuz fɔ chiz blɔk, slais ɛn pat. di barεri εn di pil pεrformεns fכ mach wit di chiz tכp εn di εkspεkt rεspireshכn.

Delicatessen Prodakt dɛn we dɛn mek

Dɛn kin yuz klia thermoformed pak fɔ slais mit, antipasti, salad we dɛn dɔn pripia ɛn ɔda chilled convenience product.

Fresh Prodakt we dɛn mek

Fresh prodɔkt pak nid fɔ tink bɔt aw fɔ blo, kɔndɛns, ventileshɔn ɛn anti-fɔg pefɔmɛns. Maksimal barɛri nɔto ɔltɛm na di kɔrɛkt sɔlvishɔn.

Di it dɛn we dɛn dɔn rɛdi

Standard PET/PE nɔ fɔ ɔtomɛtik diskrayb se i fayn fɔ maykrowev rihit, ɔt filin, pasteurization, retort prɔsesin ɔ kɔvɛnshɔnal ɔvin.

Dɛn aplikeshɔn ya nid fɔ gɛt wan sɛpret tɛst we dɛn dɔn tɛst ɔt-rɛsistant strɔkchɔ ɛn validet kɔmplit pakej.

PET/PE Tɛmofɔmin Aplikeshɔn Imej dɛn

Modified-Atmosphere ɛn Vaykum Pakɛj

Modified-Atmosphere Packaging we dɛn kin yuz fɔ mek tin dɛn

Modified-atmosphere packaging de riples di air in di package wit wan miksɔp we dɛn dɔn pik fɔ ɔksijɛn, kabon dayɔgzayd, naytrɔjen ɔ ɔda gas dɛn we dɛn alaw.

Di barɛri we dɛn nid de dipen pan di prɔdak, gas miksɔp, target shelf layf ɛn stɔrɔj ​​tɛmpracha. כksijεn-sεnsitiv MAP aplikεshכn dεm kכmכn nid wan EVOH-kכntεn strכkchכ.

Vaykum we dɛn kin pak

Vaykum pak de pul di briz bifo dɛn sial am. Di film fɔ gi rili sil trɛnk, pankchɔ rɛsistɛns ɛn inof fɔm pefɔmɛns.

di prodakt dεm we nכ rεgεl, shap כ bon-in kin nid fכ fכm fכm fכ mכr fleksibul PA-bεys pas wan tin rigid PET/PE wεb.

Vakum-Skin Pak we dɛn kin yuz fɔ mek tin dɛn

Vaykum-skin pak nid fɔ gɛt fayn rigid bɔt wɛb ɛn wan dediket fleksibul skin fim. Di skin film, bottom-web siling layer ɛn di hitin sistem fɔ validet as wan paket.

Anti-Fɔg, Anti-Blɔk ɛn Surface Opshɔn dɛn

Anti-Fɔg Tritmɛnt

Anti-fog tritmɛnt de ɛp fɔ ridyus di fɔmɛshɔn fɔ smɔl smɔl wata drɔp dɛn we de ambɔg di we aw pɔsin kin si it we dɛn dɔn kol.

Pɔfɔmɛnshɔn dipen pan di prɔdak mɔstɔ, di tɛmpracha na di paket, di humiditi we dɛn de kip ɛn di tritmɛnt we dɛn dɔn pik.

Anti-Blɔk Tritmɛnt

Anti-blכk aditiv dεm de impruv di rol unwinding εn ridyus di tεndens fכ adjasent film layεr dεm fכ stik tכgeda.

Di anti-blɔk lɛvɛl fɔ balans agens transparency, gloss, sial integriti ɛn surface appearance.

Surface we dɛn kɔt wit silikon

Silikɔn tritmɛnt kin mek di mold rilis, trey denest ɛn sɔfa handling. Kɔmpatibiliti wit printin, lamination ɛn siling fɔ kɔnfɔm.

Fim we gɛt kɔlɔ

Klir na di standad apinans. Wait, blak ɛn kɔstɔmayz kɔlɔ dɛn kin evalyu fɔ branding, layt protɛkshɔn ɔ prodak difrɛns.

Fɔd-Kɔntakt ɛn Rigyuletɔri Rikwaymɛnt dɛn

PET/PE film fɔ jɔs diskrayb as fud-kɔntakt kɔmpliant we di ɛksaktɔ PET layt, PE silan, tay layt, adeziv, pigmɛnt ɛn risaykul-kɔntinɛnt strɔkchɔ gɛt sɔpɔt bay di rayt dɔkyumentri.

Di wan dɛn we de bay fɔ sho di say we dɛn want fɔ go na di makit, di kayn it we dɛn de it, di say we dɛn kin kɔntakt dɛn dairekt wan, di tɛmpracha we dɛn kin kɔntakt, di tɛm we dɛn kin kɔntakt ɛn di we aw dɛn kin fil ɔ stɔrɔj.

Friz, hot filin, maykrowev rihit, pasteurization, retort prɔsesin ɛn sterilayzeshɔn nid sɛpret matirial ɛn pakej validɛshɔn.

ISO 9001 ɛn ISO 14001 na manejmɛnt-sistim standad. Dɛn nɔ de bay dɛnsɛf fɔ mek pipul dɛn fala di lɔ we dɛn de yuz fɔ it ɔ fɔ mek dɛn gɛt mɛrɛsin fɔ wan patikyula fim.

RoHS dɔkyumentri de adrɛs sɔbstans dɛn we dɛn dɔn stɔp fɔ mek ilɛktrik ɛn ilɛktronik prɔdak dɛn we gɛt fɔ du wit am ɛn dɛn nɔ fɔ yuz dɛn wan as pruf fɔ sef we pɔsin kin gɛt wit it.

Famasiutik ɛn Mɛdikal Pakɛj

Standart fud-pak PET/PE film nɔ fɔ yuz ɔtomɛtik fɔ pak fɔ famasi ɔ mɛdikal-divays.

Dɛn aplikeshɔn ya kin nid fɔ gɛt kɔntrol raw matirial, validet klin, traysabiliti, sterilayz kɔmpitibliti, barɛri tɛst ɛn aplikeshɔn-spɛsifi k rigyuletɔri dɔkyumentri.

Di prodak we dɛn pak, sterilayzeshɔn prɔses, shelf layf we dɛn nid ɛn di standad we dɛn fɔ yuz fɔ gi bifo dɛn pik wan fim.

Risaykul ɛn Sastaynabiliti

PET/PE na wan laminat we gɛt bɔku tin dɛn fɔ du. I aktual risaykulbiliti dipen pan di prɔpɔshɔn fɔ ɛni polima, adeziv, tay layers, kɔtin, pigmɛnt, lɛbl ɛn di risaykul infrastukchɔ na di dɛstineshɔn makit.

Di yus fɔ wan wan risaykul PET ɛn PE polima nɔ de mek di finish maltilayer pakej risaykul in prɔsis ɔtomɛtik wan.

Risaykul PET kin inkɔrpɔret insay sɔm strɔkchɔ dɛn we di aplikeshɔn alaw ɛn sɔpɔt bay wan aprɔpriet funkshɔnal-baria dizayn ɛn dɔkyumentri.

Sastaynabiliti impruvmɛnt kin inklud fɔ ridyus di tɔtal film tiknes, inkrisayz aprɔv risaykul kɔntinyu, ridyus pigmɛnt ɛn pik wan PET-dominant ɔ mono-matirial ɔltɛrnativ usay teknik wan prɛktikal.

Klɛm dɛn lɛk risaykul, eko-friɛndli ɔ sataynabul fɔ sɔpɔt bay di ɛksaktɔl fim strɔkchɔ, pak fɔmat, dɛstineshɔn makɛt ɛn aplikebul asɛsmɛnt we.

Kwaliti-Kɔntrol Tɛst dɛn we Dɛn Rikɔmɛnd

• Total tiknes ɛn individyual-layer tiknes.

• Rol wit, dayamita, wet, kɔr ɛn wayndin dairekshɔn.

• Transparency, haze, gloss ɛn kɔlɔ kɔnsistɛns.

• Skrat na di surface, jel, blak spat ɛn dɔti we pɔsin kin si.

• Rol flatnɛs, ed alaynɛshɔn ɛn unwinding pefɔmɛns.

• Intalayεr adheshon εn rεsistεns to delaminεshכn.

• Tεrmoforming tεmprachכ winda εn kaviti difinishכn.

• Wall-tiknes distribushɔn ɛn minim kɔna tik.

• Flange flatness, shrinkage ɛn dimɛnshɔnal stebiliti.

• Sil-initiashɔn tɛmpracha ɛn hot-tak pefɔmɛns.

• Weld ɔ izi-pil sil trɛnk.

• Lik, bɔrst, vaykum-dɛkay ɔ day-pɛnɛreshɔn tɛst.

• OTR ɛn WVTR ɔnda spɛsifikɛd tɛst kɔndishɔn dɛn.

• Impekt, pankchɔ ɛn lɔw-tɛmpracha pefɔmɛns.

• Anti-fog, anti-blɔk ɛn mashin-rɔn pefɔmɛns.

• Prodakt shelf-layf ɛn distribyushɔn trayal dɛn.

Kastom PET/PE Film Opshɔn dɛn

• Standart PET / PE termoforming film.

• PET/EVOH/PE ay ɔksijɛn-barɛri film.

• Customized total tiknes ɛn layt rεshɔn.

• Tכtal tiknes fכ aprכksimatli 0.23-0.28mm fכ di fכm gred.

• Customized rol wit, dayamita ɛn rol wet.

• 3-inch ɔ 6-inch pepa kɔr.

• Weld-sial ɛn izi-pil silin sɔfays.

• Klia, wayt, blak ɔ kɔstɔmayt kɔlɔ dɛn.

• Anti-fog, anti-blɔk ɛn silikon-kɔt sɔfays.

• Virgin PET ɔ sɔm risaykul-PET strɔkchɔ dɛn we dɛn dɔn pik.

• Fɔd-kɔntakt opshɔn dɛn we de ɔnda di target-maket rikwaymɛnt dɛn.

• A4 sheet ɔ limited rol sɛmpul fɔ mashin tɛst.

Infɔmeshɔn we Yu nid fɔ gɛt Kot

• Prodakt we dɛn pak ɛn di shelf layf we dɛn nid.

• PET/PE, PET/EVOH/PE ɔ kɔrɛnt matirial strɔkchɔ.

• Rikwayd totɛl tiknɛs ɛn layt kɔmpɔzishɔn.

• Rol wit, dayamita, wet ɛn kɔr saiz.

• Thermoforming-mashin brand ɛn mɔdel.

• Kaviti lɔng, wit, dip ɛn kɔna rayus.

• Minimum tik we di wɔl ɛn kɔna nid.

• Weld-sial, izi-pil ɔ risial rikwaymɛnt.

• Top-film strɔkchɔ ɛn silin-layer matirial.

• Sial tɛmpracha, prɛshɔn ɛn tɛm fɔ de.

• Rikwayd OTR ɛn WVTR wit tɛst kɔndishɔn.

• Vaykum, MAP ɔ nɔmal-atmosfɛs pak.

• Anti-fog, anti-blɔk ɔ kɔlɔ we dɛn nid.

• Destination market ɛn fud-kɔntakt dɔkyumɛnt dɛn.

• Trayal kwantiti, fɔs ɔda ɛn ɛni ia volyum.

• Destination port ɛn di de we dɛn aks fɔ fɔ sɛn am.

Send Yu PET/PE Film Rikwaymɛnt dɛn

Pakɛj ɛn Delivri

Sampul pak: Dɛn kin sial A4-sayz film sɛmpul dɛn insay PP bag ɛn pak dɛn insay katon we de protɛkt dɛn.

Rol pak: Dɛn kin rap rol wit protɛktiv film, kraft pepa ɔ pak we nɔ de mek wata ɛn dɛn kin sikyuɔr am pan ɛkspɔt palet.

Kor protɛkshɔn: Dɛn kin protɛkt di rɔl ɛnd ɛn pepa kɔr fɔ ridyus di damej we dɛn de handle ɛn transpɔt.

Shit pak: Usay dɛn de gi kɔt sheet, wan rɛfrɛns paket wet na lɛk 30kg ɔ dɛn kin kɔstɔmayz am.

Palet pak: Na lɛk 500-2,000kg kin pak pan plai wud palet akɔdin to di rol ɔ shit dimɛnshɔn.

Kɔntena lod: Rifrɛns lod na lɛk 20 tan, we de ɔnda di palet kɔnfigyushɔn ɛn di ligal wet limit.

Dilivri tɛm dɛn: EXW, FOB, CNF, CIF, DDU ɛn ɔda tɛm dɛn we dɛn gri pan de.

Lid tɛm: Standart prodakshɔn nɔmal fɔ tek lɛk 10-14 wok dez afta spɛsifikɛshɔn, kwantiti, pak ɛn pemɛnt kɔnfɔmeshɔn.

PET/PE Laminated Film Teknik Data

Daunlod di tɛknikal data sheet we de fɔ rifer to. Kɔnfɛm se di dɔkyumɛnt de aplay to di ɛksaktɔl strɔkchɔ, totɛl tiknɛs, PET gred, PE silan ɛn prodakshɔn batch we dɛn de ɔda.

   Daunlod PET/PE Laminated Film Data Shit

Sɛtifiket ɛn Kwaliti Dokumɛnt dɛn

HSQY kin gi prɔdak tɛst ripɔt dɛn we de, ristrikt-sɔbstans dɔkyumɛnt ɛn manejmɛnt-sistim sɛtifiket fɔ rivyu.

Di wan dɛn we de bay fɔ kɔnfɔm se ɛni dɔkyumɛnt kɔrɛkt to di ɛksaktɔ PET layt, PE silan, adeziv, kɔlɔ, tɔtal tik ɛn di aplikeshɔn we dɛn want fɔ yuz.

Dɛn nɔ fɔ trit jenɛral sɛtifiket as pruf fɔ se ɛvri PET/PE fim mit ɔl di tin dɛn we dɛn nid fɔ gɛt fɔ kɔntakt it, famasitik, mɛdikal, friza, maykrowev ɔ ay tɛmpracha.

Wetin Mek Yu Pik HSQY as Yu PET/PE Film Supplier?

HSQY Plastik Grup de saplae PET/PE laminated film, PET/EVOH/PE baria film, thermoforming sheet, lidding film ɛn fud-pak trey to fud manifakta, pak kɔnvɔta ɛn distribyushɔn.

• PET/PE ɛn PET/EVOH/PE strɔkchɔ divɛlɔpmɛnt.

• Fit 0.23-0.28mm thermoforming film we dɛn mek.

• Customized PET ɛn PE layt tiknɛs dɛn.

• Kastom rol wit, dayamita, wet ɛn kɔr.

• Weld-sial ɛn izi-pil opshɔn dɛn.

• Anti-fog ɛn anti-blɔk sɔfays dɛn.

• Sampul fɔ fɔm ɛn sial trayal dɛn.

• Fɔd-kɔntakt dɔkyumentri we de ɔnda di spɛsifikɛshɔn.

• Ekspɔt pak ɛn intanashɔnal-delivri sɔpɔt.

Bifo bulk prodakshɔn, HSQY rikɔmɛnd fɔ validet di film yuz di kɔstɔma in aktual prodak, thermoforming mashin, mold, lidding film, gas miksɔp ɛn siling paramita.

Ɛksplɔrɔ mɔ PET/PE lamination film prodakt ɔ rivyu di PET thermoforming film rεnj.

Kontakt HSQY fɔ Sampul ɛn Prayz

HSQY Globɛl Ɛgzibishin dɛn

HSQY de prezant PET/PE thermoforming films, baria laminates, lidding films ɛn fud-pak prodakt na intanashɔnal plastic ɛn pak ɛgzibishin.

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET/PE Thermoforming Film

Wetin na PET/PE laminated thermoforming film?

Na wan multilayer film we de kam togɛda wan rigid PET-based fɔm layt wit wan PE ɔt-silin layt fɔ fud trey ɛn fɔm-fil-sial pak.

Wetin na di tik we dis PET/PE film tik?

Di fichu film gɛt wan totɛl tik we na lɛk 0.23-0.28mm. Ɔda strɔkchɔ dɛn kin nid fɔ gɛt difrɛn tik.

Wetin di PET layt de du?

PET de gi transparency, rigidity, impak resistans ɛn di strɔkchɔral bɔdi we dɛn nid fɔ thermoforming.

Wetin di PE layt de du?

PE de gi ɔt-silin kapabiliti, fleksibiliti, mɔstɔ rɛsistɛns ɛn di weld ɔ pil bihayvya we dɛn nid.

Yu tink se standad PET/PE film na ay ɔksijɛn-baria matirial?

Standart PET/PE nɔ fɔ ɔtomɛtik klas as ɔlta-hay ɔksijɛn-baria film. Di OTR we dɛn mɛzhɔ fɔ kɔmpia wit di shelf-layf spɛsifikɛshɔn we dɛn nid.

Wetin na di difrɛns bitwin PET/PE ɛn PET/EVOH/PE?

PET/EVOH/PE inklud wan EVOH layt we de gi big rεsistεns to כksijεn, aromas εn gas pas wan standad PET/PE strכkchכ.

PET/PE fit fɔ thermoforming?

Yɛs. Suitabl PET/PE gred dɛn kin thermoformed insay trey ɛn bottom wɛb yuz validated itin profayl ɛn mold dizayn.

PET/PE film kin rɔn pan fɔm-fil-sil ikwipmɛnt?

Yɛs. Di rol wit, kɔr, dayamita, fɔm tɛmpracha, indeks ɛn silin kɔndishɔn fɔ mach wit di FFS mashin.

Yu kin yuz PET/PE film fɔ pak fresh mit?

Yɛs. Yu kin yuz am fɔ fresh ɛn prɔses mit we di barɛri lɛvɛl, sil sistɛm, gas miksɔp ɛn stɔrɔj ​​kɔndishɔn mit di paket rikwaymɛnt dɛn.

Yu tink se dɛn kin yuz PET/PE fim fɔ fish ɛn sifud?

Yɛs. Pankchɔ rɛsistɛns, likwid kɔntɛnshɔn, ɔda barɛri ɛn lɔw-tɛmpracha impak pefɔmɛns fɔ tɛst fɔ di spɛshal sifud prodak.

Yu tink se dɛn kin yuz PET/PE fim fɔ pak chiz?

Yɛs. Yu kin yuz am fɔ slais, blɔk ɛn pat pan chiz we di barɛri ɛn di pil prɔpati dɛn mach wit di chiz tayp.

Yu tink se dɛn kin yuz PET/PE fim fɔ pak tin dɛn we dɛn dɔn chenj di atmosfɛs?

I kin yuz we in mɛzhɔd barɛri pefɔmɛns mit di MAP spɛsifikɛshɔn. כksijεn-sεnsitiv aplikεshכn dεm kin nid PET/EVOH/PE.

Wetin na OTR?

OTR na ɔksijɛn transmishɔn rit. I de mɛzhɔ ɔmɔs ɔksijɛn de pas tru wan fim ɔnda spɛshal tɛmpracha ɛn humiditi kɔndishɔn.

Wetin na WVTR?

WVTR na wata-vapour transmishɔn rit. I de mɛzhɔ mɔstɔ-vaypa transmishɔn ɔnda difayn tɛst kɔndishɔn dɛn.

Wetin na di difrɛns bitwin weld sil ɛn izi peel?

Weld sil de gi wan strɔng pɔrmanent bond. Izi peel opin pan wan kɔntrol fɔs fɔ impɔtant kɔshɔma kɔvinant.

Yu tink se dɛn kin ad anti-fɔg tritmɛnt?

Yɛs. Dɛn kin ad anti-fɔg tritmɛnt fɔ kol ɛn mɔstɔ-jɛnɛreshɔn prɔdak dɛm usay kɔndɛnseshɔn de ridyus di visibiliti.

PET/PE film fayn fɔ friz?

Friza suitabiliti dipen pan di PET fɔmyulashɔn, impak pefɔmɛns, PE layt, sil trɛnk ɛn stɔrɔj ​​tɛmpracha. Dɛn nid fɔ tɛst di tɛmpracha we nɔ gɛt bɛtɛ tɛmpracha.

PET/PE film maykrowev ɔ ɔvin sef?

Standart PET/PE nɔ fɔ yuz ɔtomɛtik wan na maykrowev, kɔvɛnshɔnal ɔvin, ritɔt prɔses ɔ ay-tɛmpracha filin aplikeshɔn. Wan validet ɔt-rɛsistant strɔkchɔ nid fɔ de.

Yu tink se PET/PE laminated film kin risaykul?

PET/PE na wan laminat we gɛt bɔku tin dɛn. Aktual risaykulbiliti dipen pan di layt rεshכ, adeziv, aditiv εn lokal risaykul infrastukchɔ.

Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul?

Di strɔkchɔ dɛn we dɛn dɔn pik kin inklud risaykul PET we di fud-kɔntakt aplikeshɔn alaw am, funkshɔnal-baria dizayn ɛn di tin dɛn we dɛn nid fɔ du na di target-maket.

Yu tink se di fim sef fɔ pak it?

Fɔd-kɔntakt suitabiliti fɔ kɔnfyus fɔ di ɛksaktɔ PET, PE, adeziv ɛn aditiv strɔkchɔ ɔnda di it tayp, tɛmpracha ɛn dɛstineshɔn-maket rigyuleshɔn dɛn we dɛn want.

PET/PE film fayn fɔ pak fɔ mɛrɛsin?

Famasitik pak nid fɔ gɛt sɛpret kwalifay gred wit di rayt prodakshɔn kɔntrol, tɛst ɛn rigyuletɔri dɔkyumentri.

Us kɔr saiz dɛn de?

Dɛn kin gi di fim pan 3 inch ɔ 6 inch pepa kɔr. Di kɔr saiz fɔ mach to di kɔstɔma in mashin ɛn di rol wet.

Yu tink se dɛn kin mek di rol in wit ɛn dayamita kɔstɔmayt?

Yɛs. Rol wit, dayamita, wet, kor ɛn wayndin dairekshɔn kin kɔstɔmayz akɔdin to di pak layn.

Wetin na di minimum ɔda kwantiti?

Di standad MOQ na aprɔksimatli 1,000kg. Spɛshal strɔkchɔ, kɔlɔ ɛn kɔtin kin nid difrɛn minim kwantiti.

Yu tink se sampul dɛn de?

A4 sheet ɔ limited rol sɛmpul dɛn kin de fɔ chɛk klia, thermoforming, siling ɛn mashin kɔmpatibiliti. Nɔmal wan na di pɔsin we bay di tin kin pe fɔ di freyt we dɛn kin kɛr go.

Wetin na di prodakshɔn lida tɛm?

Standart prodakshɔn nɔmal fɔ tek lɛk 10-14 wok dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, kwantiti, pak ɛn pe.

Us infɔmeshɔn dɛn nid fɔ kot?

Gi di prodak we dɛn pak, shelf layf, film strɔkchɔ, tik, rol wit, fɔm dip, barɛri rikwaymɛnt, sil tayp, lidding film, kwantiti ɛn ples fɔ go.

Get wan Kastom PET/PE Film Kot

Bɔt HSQY Plastik Grup

Changzhou Huisu Qinye Plastic Group Co., Ltd. de saplae PET/PE laminated films, high-barrier thermoforming films, PET sheets, lidding films en fud-pakej trey to intanashɔnal B2B kɔstɔma dɛn.

HSQY de sɔpɔt fud manifakta dɛn, thermoforming kɔmni dɛn, pak kɔnvɔta dɛn, impɔta ɛn distribyushɔn wit matirial sɛlɛkshɔn, sampul tɛst, kɔstɔmayz prodakshɔn, tɛknikal dɔkyumentri ɛn ɛkspɔt delivri.

Rikwest fɔ Kot ɛn Sampul

ChangZhou HuiSu QinYe Plastik Grup bin establish pas 16 ia, wit 8 plant fɔ gi ɔl kayn Plastik prodak, inklud PVC RIGID KLIR SHEET,PVC FLEXIBLE FILM, PVC GRAY BƆD, PVC FƆM BƆD, PET SHEET, AKRILIK SHEET. Widely yuz fɔ Package, Sayn,D ecoration ɛn ɔda eria dɛn. 

 

Wi kɔnsɛpt fɔ tink bɔt ɔl tu kwaliti ɛn savis ikwal impɔtant ɛn pefɔmɛns de gɛt trɔst frɔm kɔstɔma dɛn, na dat mek wi dɔn establish gud kɔpɔreshɔn wit wi klaynt dɛn frɔm Spen, Itali, Ɔstria, Pɔtyuga, Jamani, Gris, Polan, Ingland, Amɛrika, Sawt Amɛrika, India, Tayland, Malezya ɛn so ɔda wan dɛn.

 

We yu pik HSQY, yu go gɛt di trɛnk ɛn stebiliti. Wi de mek di industri in bɔku bɔku prɔdak dɛn ɛn kɔntinyu fɔ divɛlɔp nyu teknɔlɔji dɛn, fɔmyulashɔn ɛn sɔlvishɔn dɛn. Wi reputeshɔn fɔ kwaliti, kastoma savis ɛn tɛknikal sɔpɔt nɔ pas ɛni ɔda tin na di industri. Wi de kɔntinyu fɔ tray fɔ advays sastaynabiliti prɔsis na di makit dɛn we wi de sav.