PET/PE Laminated Tɛrmofɔming Film Vidio
Wach di vidio dɔŋ ya fɔ lan mɔ bɔt HSQY PET/PE laminated thermoforming film, rol spɛsifikɛshɔn, matirial strɔkchɔ ɛn fud-pak aplikeshɔn.
Wetin Na PET/PE Laminated Tɛmofɔmin Film?
PET/PE laminated film na wan multilayer rigid packaging matirial we de kɔba wan amorphous polyethylene terephthalate sabstret wit wan polyethylene siling layt. Dɛn kin diskrayb am bak as APET/PE film, PET laminated PE sheet, PET/PE bɔt wɛb ɔ PET/PE thermoforming rollstock.
Di APET layt de gi transparency, stiffness, impak resistans ɛn thermoforming pefɔmɛns. Di PE layt de mek wan sɔfa we dɛn kin sidɔm wit ɔt ɛn i de mek i nɔ ebul fɔ bia wit mɔstɔ, likwid ɛn di pak we de lik.
HSQY de saplae klia PET/PE laminated film wit wan standad totכl tiknes rεnj we de arawnd 0.23 mm to 0.58 mm. di standad strכkchכ de yuz wan APET sabstεrayt we dεn lamin wit wan aprכksimatli 50 μm LDPE siling layεr.
Di matirial de saplae insay rol wit kɔstɔmayz wit, rol dayamita ɛn winding spesifikeshɔn. Standart pepa-kɔr opshɔn dɛn inklud 3-inch ɛn 6-inch kɔr fɔ kɔmpitibliti wit tɛmfɔmin ɛn fɔm-fil-sil pak ikwipmɛnt.
PET/PE thermoforming film na tin we dɛn kin yuz fɔ chill ɛn frɔzɛn mit, fish, sifud, chiz, dairy prodak, fresh pasta, pripia it ɛn ɔda prɔdak dɛm we nid transparent rigid trey wit rili ɔt-silin sɔfays.
Weld-sial ɛn peelable strɔkchɔ dɛn kin divɛlɔp akɔdin to di lidding film, tre-siling ikwipmɛnt, stɔrɔj kɔndishɔn ɛn rikwayd opin fɔs.
Standard PET/PE film nɔ fɔ ɔtomɛtik diskrayb as ay-ɔksijɛn-baria matirial. Aplikeshɔn dɛn we nid fɔ gɛt ɛkstend shelf layf ɔ rili lɔw ɔksijɛn transmishɔn kin nid PET/EVOH/PE ɔ ɔda ay-baria strɔkchɔ we dɛn dɔn tɛst.
Rikwest PET/PE Film Prayz Rikwest Matirial Samples
PET/PE Laminated Film Imej dɛn
![Klia PET PE laminated thermoforming film rol fɔ pak it]( "PET PE Laminated Thermoforming Film Roll")
Klia PET/PE Tɛmofɔmin Film Rol
![APET PE laminated rigid film fɔ mit fish ɛn chiz pak]( "APET PE Laminated Film for Food Packaging")
APET/PE Laminated Fɔd Pakɛj Film
PET/PE Laminated Film Teknik Data Shit
Daunlod di data sheet we de fɔ di fɔs ɛvalueshɔn. Di wan dɛn we de bay fɔ kɔnfɔm se di dɔkyumɛnt de aplay to di ɛksaktɔl tik, PE-layer spɛsifikɛshɔn, siling gred ɛn prodakshɔn batch we dɛn de ɔda.
Daunlod PET/PE Laminated Film Data Shit
PET/PE Laminated Film Spɛsifikeshɔn dɛn
| Prɔpati |
we De Spɛsifikeshɔn |
| Di Nem fɔ Prodak |
PET/PE Laminated Film fɔ Tɛmofɔmin ɛn Fɔd Pakɛj |
| Ɔda Nem dɛn |
APET/PE film, PET laminated PE sheet, PET/PE bottom wɛb ɛn PET/PE tɛmɔfɔmin rolstɔk |
| Standart Struktrɔ |
APET sabstrat wit LDPE silin layt |
| Standart PE Layer |
Na lɛk 50 μm LDPE |
| Kastom PE Layer we yu kin yuz |
Sɔbjɛkt to sil trɛnk, peel pefɔmɛns, film kɔmpatibiliti ɛn minim-ɔda rikwaymɛnt |
| Tɔtɔl Tiknɛs |
Na lɛk 0.23-0.58 mm |
| Ɛgzampul Strukchɔ dɛn |
180/50 μm, 200/50 μm, 250/50 μm, 300/50 μm, 400/50 μm ɛn kɔstɔmayz kɔmbaynshɔn dɛn |
| PET Matirial Opshɔn dɛn |
Virgin APET ɔ RPET-kɔntinɛnt strɔkchɔ we de ɔnda klia, kɔmplians ɛn risaykul-kɔntinɛnt rikwaymɛnt |
| Aw a luk |
Klia, transparent, tint ɔ kɔstɔmayt kɔlɔ |
| Sho |
Glos, mat, silikon-koted, anti-blɔk ɔ kɔstɔmayz tritmɛnt |
| Fɔm fɔ di Sapɔt |
Tɛmofɔmin rol, slit rol ɔ kɔstɔm-kɔt sheet |
| Rol Width we yu de yuz |
Customized akɔdin to thermoforming-mashin ɛn trim-tul rikwaymɛnt dɛn |
| Kor Dayamita |
3-inch ɔ 6-inch kɔr |
| Rol Dayamita we dɛn kɔl |
Customized akɔdin to mashin kapasiti, rol wet, kɔr ɛn transpɔt rikwaymɛnt |
| Rol Weyt we yu kin yuz |
Na lɛk 50 kg ɔ we dɛn kɔstɔmayz fɔ ɔtomɛtik prodakshɔn layn dɛn |
| Gret fɔ Sial |
Weld-sil, lɔk-sil ɔ peelable gred we de ɔnda lidding-film kɔmpitibliti |
| Di we aw dɛn de du di wok |
Tεmכfכm, vεkyum fכm, prεshכn fכm εn fכm-fil-sil prכsεsin |
| Standart Aplikeshɔn dɛn |
Mit, fish, sifud, chiz, dairy prodakt, fresh pasta, it we dɛn dɔn pripia ɛn tin dɛn we dɛn dɔn kol ɔ we dɛn dɔn frɔz |
| Opshɔn we gɛt ay-baria |
PET/EVOH/PE ɔ ɔda tɛst multilayer strɔkchɔ fɔ aplikeshɔn dɛn we nid fɔ gɛt lɔwa ɔksijɛn transmishɔn |
| Fɔd-Kɔntakt Opshɔn |
Available yuz aplikeshɔn-spɛsifi k it-kɔntakt raw matirial ɛn dɔkyumentri |
| Yuz fɔ Mɛdikal ɔ Famasiutik |
I nid fɔ gɛt sɛpret matirial, klin, sial ɛn rigyuletɔri ɛvalueshɔn |
| Minimum Ɔda Kwantiti |
Na lɛk 1,000 kg fɔ standad spɛsifikɛshɔn dɛn; kɔstɔm strɔkchɔ dɛn kin nid difrɛn MOQ |
| Ɛgzampul |
A4 sheet ɔ limited rol sɛmpul dɛn kin de; kɔriɔ freyt na nɔmal wan dɛn kin gɛda am |
| Di Tɛm dɛn fɔ Pe |
T/T, L/C ɛn ɔda tɛm dɛn we gɛt fɔ du wit kɔmɛshɔnal kɔnfɔmeshɔn |
| Tɛm dɛn fɔ Tred |
EXW, FOB, CNF, CIF ɛn ɔda intanashɔnal tred tɛm dɛn we dɛn gri |
| Tipik Prodakshɔn Taym |
Aprɔksimatli 10-14 dez afta spɛsifikɛshɔn, pe ɛn pak kɔnfɔmeshɔn |
| Di we aw dɛn de pak di tin dɛn |
Protektiv rol rap ɛn plai wud palet ɔ kɔstɔmayz ɛkspɔt pak |
Faynal tiknes tolɛreshɔn, rol wit, wayndin dairekshɔn, rol dayamita, kɔr, PE-layer spɛsifikɛshɔn, sil trɛnk ɛn fud-kɔntakt rikwaymɛnt dɛn fɔ kɔnfɔm tru wan aprɔv sampul ɛn rayt prodak spɛsifikɛshɔn.
PET/PE Laminated Film Layer Struktur
| Layer |
Praymari Fɔnkshɔn |
Ki Kɔntrol Point dɛn |
| APET Strɔkchɔral Layer |
Gi klia, stiffness, impak resistans ɛn thermoforming sɔpɔt |
PET gred, intrinsik viskositi, risaykul kɔntinyu, klia ɛn tiknɛs distribyushɔn |
| Lamination ɔ Tay Intafɛs |
Mentεn adheshon bitwin di PET εn PE layεr dεm we dεn de fכm, sial εn stכrej |
Bond trɛnk, delamination resistance, fud-kɔntakt stetɔs ɛn risaykul impak |
| PE Siling Layer we de mek yu fil |
I de gi ɔt silin, likwid rɛsistɛns, mɔstɔ rɛsistɛns ɛn kɔmpitibliti wit sɔm liding film dɛn we dɛn dɔn pik |
PE kemistri, kot tiknes, sil-initiashɔn tɛmpracha, peel trɛnk ɛn kɔntaminɛshɔn rɛsistɛns |
| Opshɔnal Surface Tritmɛnt we yu kin yuz |
Sɔpɔt denɛst, anti-blɔk, anti-fɔg, printin ɔ kɔntrol kɔfishin fɔ frikshɔn |
Tritmεnt sayd, maykrεshכn, fכd-kכntakt kכmplians εn tεmכfכm durabiliti |
Wetin mek yu fɔ Kɔmbayn APET wit wan PE Silin Lay?
PET De Gi Rigiditi ɛn Prodak Visibiliti
APET de gi di strɔkchɔral stiffness we nid fɔ fɔm trey ɛn kɔntena dɛn we i de mentɛn klia prodak visibiliti. I de sɔpɔt bak klin trim ɛn dimɛnshɔnal stebiliti insay chill-fud pak.
PE Krio wan Hɛt-Sial Sɔfays
Standart APET nɔ de gi di sem dairekt ɔt-silin bihayvya lɛk wan pɔpɔshɔn-disayn PE silin layt. Di PE sayd kin mach wit kɔmpatibl tɔp film fɔ mek wan sikrit weld ɔ kɔntrol peel.
PE De Impruv Moisture ɛn Liquid Resistance
di PE layt de mek yu ebul fכ rεsist wata vapour, mit jus, brin, כyl εn כda likwid dεm we dεn kin fכnshכn insay kol-fud pak.
Di Kɔmbayn Strukchɔ De Sɔpɔt Ɔtomatik Pakɛj
PET/PE rolstɔk kin fɔm, ful-ɔp ɛn sial pan kɔmpatibl ɔtomatik layn dɛn, we de ridyus separet trey handlin ɛn sɔpɔt kɔntinyu fɔ pak it-pak prodakshɔn.
PET/PE vs. APET ɛn PET/EVOH/PE
| Kכmpεreshכn |
Mono APET |
PET/PE |
PET/EVOH/PE |
| Fɔ du tin klia wan |
Ay |
High, dipen pan laminate kwaliti |
Ay to mɔdaret, i dipen pan di tɔtal strɔkchɔ |
| Rigiditi we pɔsin kin gɛt |
Ay |
Ay |
Ay |
| Dairekt Hɛt-Silin Surface |
Limitɛd we nɔ gɛt kɔmpitabl kɔtin ɔ sil layt |
PE siling layt fɔ sial |
PE siling layt fɔ sial |
| Mɔstɔ Resistɛns |
Gud |
Improved bay di PE layt |
Improved bay di PE layt |
| Ɔksijɛn Barɛri |
Modaret ɛn gred dipɛndent |
Nɔmal wan dɛn nɔ kin tek am se na dediket ay-ɔksijɛn-baria strɔkchɔ |
Disain fɔ substantially low ɔksijɛn transmishɔn we dɛn spɛsifa kɔrɛkt wan |
| Tipik Aplikeshɔn dɛn |
Klamshɛl, lid, tre ɛn kol-fud pak |
Mit, fish, chiz, dairy ɛn FFS pak we dɛn dɔn sidɔm wit ɔt |
MAP, mit, chiz ɛn ɔksijɛn-sɛnsitiv prɔdak dɛm we gɛt ɛkstend-shɛlf-layf |
| Di Tin we Yu Fɔ Selɛk |
Selekt di strɔkchɔ akɔdin to di prodak shelf layf, OTR, WVTR, sil pefɔmɛns, fɔm dip, stɔrɔj tɛmpracha ɛn risaykul rikwaymɛnt |
Ki Ficha dɛn fɔ PET/PE Laminated Film
Ay Transparency ɛn Gloss
Di APET layt de gi klia prodak visibiliti ɛn wan glos rital apinans fɔ mit, sifud, chiz, pripia it ɛn ɔda chill prodak.
Rilibul Tɛmofɔmin Pɔfɔmɛnshɔn
PET/PE film we dɛn spɛsifa fayn fayn wan kin fɔm wit vaykum ɔ prɛshɔn fɔm insay trey wit difayn kɔna, flɛnch ɛn kaviti dip.
PE Surface we yu kin sial wit ɔt
Di LDPE layt kin bi disayn fɔ strɔng weld sil ɔ kɔntrol peelable sil wit kɔmpitabl lidding film.
Mɔstɔ ɛn Liquid Resistans
Di PE siling layt de ɛp fɔ protɛkt di paket frɔm mɔstɔ, prɔdak jus, brin ɛn lik we dɛn de kip am kol ɔ frɔzɛn.
Impekt ɛn Pɔnkshɔn Pɔfɔmɛnshɔn
APET de gi prɛktikal tafnɛs fɔ fɔm trey, transpɔt ɛn rital hanlin. Shap bon dɛm, frɔzɛn ed dɛm ɛn dip-drɔ kɔna dɛm fɔ evaluate yuz di aktual prodak.
Weld-Seal ɛn Peelable Opshɔn dɛn
Difrɛn PE fɔmyulashɔn dɛn kin pik fɔ pɔrmanent lɔk sil ɔ kɔshɔma-frenli pil opin.
FFS Layn Kɔmpatibiliti
Customized rol widths, kor, winding dairekshɔn ɛn rol dayamita kin sɔpɔt thermoform-fil-seal pak layn dɛn.
Kastom Fɔnshɔnal Tritmɛnt dɛn
Anti-blɔk, silikon, anti-fɔg, antistatik, tint ɛn ɔda aplikeshɔn-spɛsifi k opshɔn dɛn kin tɔk bɔt akɔdin to di prɔsesin ɛn pak we dɛn nid.
Tɛmofɔmin ɛn FFS Prɔsesin Gaydlain
Konfam di PE Sayd Bifo yu Lod di Rol
Di PE siling surface must face di korekt dairekshon in di fom pakej. Rol winding ɛn trit-sayd aydentifikeshɔn fɔ kɔnfɔm bifo dɛn prodyuz.
Kɔntrol di Hɛt Profayl
Hɛt fɔ sof di PET inof fɔ mek i nɔ ɔva ɔt, kristaliz ɔ damej di PE siling layt.
Evaluate Dip-Draw Wall Distribushɔn
dip kכva dεm, shap kכna dεm εn big dro rεshכn kin tכn di strכkchכ. Di trey we dɛn dɔn fɔm fɔ chɛk fɔ di minim wɔl tik, pinhol ɛn sil-flɛnj stebiliti.
Kontrol di Flange Surface
Wrinkles, nɔ ivin fɔm, it kɔntaminɛshɔn ɛn prodak likwid na di flɛnch kin ridyus siling rilaybiliti.
Match di Tɔp Fim ɛn di Bɔt Wɛb
Di lidding film sialant fɔ kɔmpitabl wit di PE silin layt. Sil tɛmpracha, prɛshɔn ɛn di tɛm fɔ de fɔ de tru prodakshɔn trayal.
Test di Kɔmplit Pakɛj Prɔses
Faynal aprɔval fɔ inklud fɔ fɔm, ful-ɔp, sial, chil ɔ friz, transpɔt, stɔrɔj, opin ɛn shelf-layf tɛst wit di aktual it prodak.
Weld-Seal vs. PET/PE Film we yu kin pul
| Kɔmpia |
Weld-Sil ɔ Lɔk-Sil |
Pilabl Sil |
| Di We aw Dɛn De Opin |
Strɔng pɔrmanent sil we kin nid fɔ kɔt ɔ film tear |
Film de dizain fɔ peel frɔm di trey flange |
| Sil Strɔng |
Higher bond strength fɔ dimand transpɔt ɛn lik-rɛsistɛns rikwaymɛnt |
Kontrol opin fos fo konsuma konvinyens |
| Di Tipik Yuz |
Indastrial pak, it dɛn we gɛt bɔku lik ɛn paket dɛn we dɛn nɔ mek fɔ izi fɔ opin an |
Ritayl mit, chiz, it dɛn we dɛn dɔn pripia ɛn pak we rɛdi fɔ kɔstɔma dɛn |
| Men Tɛst |
Bɔst, lik, transpɔt ɛn sil-intɛgriti tɛst |
Pil fos, kɔnsistɛns, fayv tear ɛn kol-stɔrɔj pefɔmɛns |
PET/PE Film Siling Paramita dɛn
Sil pefɔmɛns dipen pan di PE fɔmyulashɔn, lidding-film silan, trey-flɛnj kɔndishɔn ɛn pak-mashin sɛtin.
Di tɛmpracha we dɛn kin sial.
Prɛshɔn fɔ sial.
Dwɛl tɛm.
Tul tempɔret yunifɔmiti.
PE-layer tiknes ɛn kemistri.
Lidding-film silant strɔkchɔ.
Prodakt kontamineshɔn na di flɛnch.
Chil ɔ frɔzɛn stɔrɔj kɔndishɔn.
Weld ɔ peel trɛnk we dɛn nid.
Di tɛst dɛn we dɛn kin rɛkɔmɛnd na fɔ mɛzhɔ di sil-strɛng, fɔ tɛst di day-pɛnɛreshɔn, fɔ tɛst di vaykum lik, fɔ tɛst fɔ bɔrst, fɔ du transpɔt simulshɔn ɛn fɔ tray fɔ yuz di prɔdak-spɛsifi k shelf-layf.
Aplikeshɔn dɛn fɔ PET/PE Laminated Film
Fresh Mit we dɛn kin pak
PET/PE film kin fɔm insay transparent trey ɛn bɔt wɛb fɔ bif, bɔd, ship, bɔd ɛn prɔses mit prodak we nid fɔ gɛt ɔt-sial pakej.
Fish ɛn Sifud Pakɛj
Mɔstɔ rɛsistɛns ɛn sil intɛgriti de mek di strɔkchɔ fayn fɔ sɔm sɛlɛkɛt fish we dɛn dɔn kol, sifud ɛn marinated-prɔdakt aplikeshɔn dɛn.
Chiz ɛn Dairy Pakɛj
PET/PE rollstock kin yuz fɔ chiz pat, slais chiz, dairy snek ɛn ɔda frij prodak dɛm we dɛn validet di ɔksijɛn barɛri ɛn sil trɛnk we dɛn nid.
Fresh Pasta we dɛn kin pak
PET/PE pakej dɛn we dɛn dɔn fɔm kin sɔpɔt fresh pasta, dumplings ɛn frij dɔti prodak dɛn we nid klia prɛzɛnteshɔn ɛn sial stɔrɔj.
Fɔd dɛn we dɛn dɔn pripia we dɛn dɔn kol
Dɛn kin yuz di tin fɔ mek salad, kol it, tin dɛn fɔ it ɛn ɔda tin dɛn we dɛn dɔn kol we rɛdi fɔ it we nɔ nid fɔ mek dɛn wok na kɔmɔn ɔvin.
Frɔzɛn Fɔd Pakɛj
Dɛn kin ebul fɔ evalyu di rayt PET/PE gred fɔ frɔzɛn stɔrɔj. Lɔw-tɛmpracha impak, sil intɛgriti ɛn paket britlɛns fɔ tɛst wit di aktual prodak.
Famasiutik ɛn Mɛdikal Pakɛj
Yuz fɔ mɛrɛsin ɔ famasi nid fɔ gɛt sɛpret kwalifay gred, kɔntrol prodakshɔn kɔndishɔn, silin validɛshɔn ɛn aplikeshɔn-spɛsifi k rigyuletɔri dɔkyumentri.
![PET PE laminated thermoforming film fɔ fresh mit pak trey dɛn]( "PET PE Film for Meat Packaging")
PET/PE Film fɔ Fresh Fɔd Pakɛj
![APET PE laminated film thermoformed insay sial it pak trey]( "APET PE Thermoformed Food Tray")
APET/PE Tɛrmofɔm Fɔd Fɔd Trey
Baria Pɔfɔmɛnshɔn ɛn Shelf-Layf Kɔnsidɛreshɔn
PET/PE pak nɔ fɔ diskrayb se i gɛt fiks ɔksijɛn, gas ɔ wata-vaypa barɛri we dɛn nɔ mɛzhɔ data fɔ di ɛksaktɔ matirial strɔkchɔ ɛn tik.
Oksijɛn transmishɔn rit ɛn wata-vaypa transmishɔn rit dipen pan di tɔtal tik, PET gred, PE tik, lamineshɔn kwaliti, tɛmpracha, humiditi ɛn tɛst we.
Standard PET/PE na di fɔs wan we dɛn pik fɔ klia thermoforming ɛn ɔt silin. i kin gi di rayt protεkshכn fכ plεnti it dεm we dεn kol, bכt i nכ de sכbstityuyt fכ wan EVOH we dεn vεrifik כ כda strכkchכ we gεt hכy כksijεn-baria.
Shelf layf dipen pan raw-prɔdakt kwaliti, hajɛns, gas miksɔp, sil intɛgriti, stɔrɔj tɛmpracha, edspɛs, lidding film ɛn distribyushɔn kɔndishɔn. Shelf-layf klem nid fɔ tɛst wit di rial it.
Tɛmpratura ɛn Hɛt Limiteshɔn
Standard APET/PE thermoforming film na men wan we dɛn mek fɔ ambient, frij ɛn frɔzɛn it pak. Dɛn nɔ fɔ tɔk bɔt am ɔtomɛtik wan se i sef na maykrowev ɔ i sef na kɔvɛnshɔnal-ɔvin.
Hot-fil suitability dipen pan di spesifik PET gred, PE layt, prodakt temperechur, fil durayshɔn ɛn pakej sɔpɔt. Di maksimal hot-fil kɔndishɔn fɔ kɔnfɔm yuz gred-spɛsifi k tɛknikal data.
Fɔ maykrowev ɔ kɔvɛnshɔnal-ɔvin it pak, tink bɔt wan aplikeshɔn-spɛsifi k PP ɔ CPET strɔkchɔ instead fɔ tek am se standad APET/PE go de dimɛnshɔnal stebul.
Fɔd-Kɔntakt ɛn Rigyuletɔri Rikwaymɛnt dɛn
Fɔd-kɔntakt suitabiliti dipen pan di ɛksaktɔ PET rɛsin, risaykul kɔntinyu, PE silin layt, tay layt, prɔsesin ɛd, sɔfayz tritmɛnt ɛn manufakchurin spɛsifikɛshɔn.
Di wan dɛn we de bay fɔ gi di makɛt usay dɛn de go, di kayn it we dɛn de it, di tɛmpracha we dɛn de kip, di tɛm we dɛn fɔ kɔntakt, di tin dɛn we gɛt fat ɔ asid, di kɔndishɔn fɔ friz ɛn di we aw dɛn want fɔ ful-ɔp.
SGS tɛst ripɔt kin gi yusful prodak-tɛst infɔmeshɔn, bɔt di ripɔt fɔ mach di ɛksaktɔl matirial strɔkchɔ ɛn di aplikeshɔn we dɛn bin want fɔ yuz.
ISO 9001 na kwaliti-mɛnejmɛnt-sistim standad ɛn i nɔ fɔ yuz am fɔ insɛf as pruf fɔ se i de fala di lɔ we pɔsin kin gɛt wit it.
Risaykul ɛn Sastaynabiliti Kɔnsidɛreshɔn
PET/PE na wan strɔkchɔ we gɛt bɔku tin dɛn. I kɔmpitibliti wit PET risaykul dipen pan di PE prɔpɔshɔn, laminat dizayn, adeziv, ink, lɛbl, it kɔntaminɛshɔn ɛn lokal risaykul infrastukchɔ.
Di matirial we dɔn dɔn nɔ fɔ diskrayb as universally ɔ kɔmplit risaykul pas dɛn dɔn evalyu in risaykul pefɔmɛns fɔ di target makit.
Wan RPET-based strɔkchɔral layt kin ridyus vajin-PET kɔnsɔmshɔn, bɔt di risaykul kɔntinyu we dɛn alaw de dipen pan fud-kɔntakt rigyuleshɔn, klia, mɛkanikal pefɔmɛns ɛn di kɔstɔma rikwaymɛnt.
Ridyus totɛl gej, impɔtant fɔm distribyushɔn ɛn ɔptimayz rol ɛn palet lod kin ridyus matirial ɛn transpɔt impak witout mek unsupported risaykulbiliti klem.
Di Tɛst dɛn we dɛn kin du fɔ di tin dɛn we dɛn kin yuz fɔ mek tin ɛn di tin dɛn we dɛn kin pak
Total tiknes ɛn individyual layt tiknɛs.
Rol wit, rol dayamita, kor dayamita ɛn winding dairekshɔn.
Transparency, haze, gloss ɛn impyuriti dɛn we pɔsin kin si.
Laminεshכn bond εn delaminεshכn rεsistεns.
Kofishin fɔ frikshɔn ɛn rol-unwinding pefɔmɛns.
Tεrmoforming tεmprachכ εn fכm winda.
Wall-thickness distribushɔn afta dɛn dɔn fɔm.
Flɛnch flatnɛs ɛn silin-sɔfa kɔnsistɛns.
Sil initiashɔn, sil trɛnk ɛn peel pefɔmɛns.
Lik, burst ɛn transpɔt rɛsistɛns.
Lɔw-tɛmpracha impak ɛn frɔzɛn-stɔrɔj pefɔmɛns.
OTR ɛn WVTR usay shelf layf dipen pan barɛri pefɔmɛns.
Fɔd-kɔntakt maykreshɔn ɔ kɔmplians tɛst fɔ di ɛksaktɔl strɔkchɔ.
Shelf-layf tɛst yuz di aktual it ɛn lidding film.
Kastom PET / PE Laminated Film Opshɔn dɛn
Tכtal tik frכm lεk 0.23 mm to 0.58 mm.
Standart 50 μm PE silin layt.
Customized PE tiknes ɛn silin fɔmyulashɔn.
Virgin APET ɔ RPET-kɔntinɛnt sabstret.
Klia, tint ɛn kɔstɔmayt kɔlɔ dɛn.
Weld-sil, lɔk-sil ɔ gred we yu kin pul.
Anti-blɔk, silikon-kɔt ɛn anti-fɔg opshɔn dɛn.
Kastom rol wit ɛn slit wit.
3-inch ɔ 6-inch pepa kɔr dɛn.
Customized rol dayamita ɛn rol wet.
PET/EVOH/PE ay-baria strɔkchɔ dɛn.
Kastom lɛbl, katon ɛn palet pak.
Infɔmeshɔn we dɛn nid fɔ mek pɔsin gɛt PET/PE Film Quotation
Total tik we di matirial tik.
PET ɛn PE layt tiknɛs dɛn we dɛn nid.
Virgin APET ɔ RPET-kɔntinɛnt rikwaymɛnt.
Rol wit, rol dayamita ɛn kɔr dayamita.
Winding dairekshɔn ɛn PE silin sayd.
Thermoforming-mashin model ɛn fɔm dip.
Fɔd prodak, filin tɛmpracha ɛn stɔrɔj kɔndishɔn.
Weld-sial ɔ peelable opin rikwaymɛnt.
Lidding-film strɔkchɔ ɛn silin-mashin paramita dɛn.
OTR, WVTR ɔ MAP barɛri rikwaymɛnt dɛn.
Anti-fog, anti-blɔk, silikon ɔ ɔda sɔfa tritmɛnt.
Fɔd-kɔntakt ɛn ples-maket rikwaymɛnt dɛn.
Trayal kwantiti, bulk ɔda ɛn ɛni ia dimand.
Paket, palet, lɛbl, ples fɔ go pɔt ɛn di de we dɛn de sɛn am.
Send Yu PET/PE Film Rikwaymɛnt dɛn
Di Opshɔn dɛn fɔ Pak ɛn Deliv
Sampul pak: A4 sheet ɔ limited rol sɛmpul kin pak insay protɛktiv bag ɛn katon.
Rol pak: Standart rol dɛn kin gɛt lɛk 50 kg ɔ dɛn kin kɔstɔmayt dɛn akɔdin to wetin di pɔsin we bay di mashin nid fɔ lod.
Rol protɛkshɔn: Dɛn kin rap rol wit PE film, mɔstɔ-rɛsistɛns matirial, protɛktiv ɛnd kap ɛn ɔda pak.
Palet pak: Dɛn kin lod lɛk 500-2000 kg pan plai wud palet dipen pan di rol wit, dayamita ɛn di we aw dɛn nid fɔ handle westɛm.
Kɔntena lod: Tipik lod na lɛk 20 tan, we de ɔnda di rol dimɛnshɔn, palet kɔnfigyushɔn ɛn kɔntena-weyt ristrikshɔn.
Dilivri tɛm: EXW, FOB, CNF, CIF ɛn ɔda tred tɛm dɛn we dɛn gri pan.
Tipik prodakshɔn tɛm: Aprɔksimatli 10-14 dez afta dipɔsit ɛn fayn spɛsifikɛshɔn kɔnfɔmeshɔn.
![PET PE laminated thermoforming film rol dɛn we dɛn pak pan ɛkspɔt palet dɛn]( "PET PE Laminated Film Packing")
Sɛtifiket ɛn Kwaliti Dokumɛnt
Di dɔkyumɛnt dɛn we de kin gɛt SGS prodak tɛst ripɔt ɛn ISO manejmɛnt-sistim sɛtifiket dɛn. Dɛn fɔ chɛk di dɔkyumɛnt dɛn we dɛn nid agens di rayt PET/PE strɔkchɔ, raw matirial, tik ɛn di we aw dɛn want fɔ yuz am.
ISO kwaliti-mɛnejmɛnt sɛtifiket nɔ de kɔnfyus insɛf se wan fim de fala di tin dɛn we dɛn nid fɔ kɔntakt wit it, famasitik, mɛdikal, maykrowev ɔ risaykul.
![HSQY kwaliti ɛn kɔmplians dɔkyumɛnt fɔ PET PE laminated pakej film]( "HSQY PET PE Film Certifications")
Wetin Mek Yu Pik HSQY as Yu PET/PE Film Supplier?
HSQY Plastic Group de saplae PET, PET/PE, PET/EVOH/PE, PP, CPET ɛn ɔda thermoforming ɛn fud-pak matirial to pak kɔnvɔta, fud manifakta, distribyushɔn ɛn intanashɔnal bayer.
PET/PE laminated film frɔm lɛk 0.23 mm to 0.58 mm.
Standart aprɔksimatli 50 μm LDPE silin layt.
Weld-sial ɛn peelable matirial opshɔn dɛn.
Customized widths, rol dayamita ɛn winding dairekshɔn.
3-inch ɛn 6-inch kɔr opshɔn dɛn.
Virgin APET ɛn RPET-kɔntinɛnt strɔkchɔ dɛn.
PET/EVOH/PE ay-baria ɔltɛrnativ dɛn.
Anti-blɔk, silikon ɛn anti-fɔg opshɔn dɛn.
Sampul fɔ fɔm, sial ɛn shelf-layf ɛvalueshɔn.
Kastamayz ɛkspɔt pak ɛn bɔlk-prɔdakshɔn sɔpɔt.
HSQY se yu fɔ tɛst di fim we yu dɔn pik pan di pɔsin we bay in aktual fɔm, fil ɛn sial ikwipmɛnt bifo yu gri fɔ mek dɛn prodyuz bɔku bɔku wan.
Kontakt HSQY fɔ Sampul ɛn Prayz
HSQY Globɛl Ɛgzibishin
HSQY Plastic Group de prezant thermoforming sheet, laminated pakej film, fud trey ɛn siling sɔlvishɔn na intanashɔnal plastic ɛn pak ɛgzibishin.
![HSQY Plastik Grup ɛgzibishin fɔ PET PE laminated film ɛn it pak prodak]( "HSQY Plastic Group Exhibition")
Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt PET/PE Laminated Film
Wetin na PET/PE laminated film?
PET/PE laminated film de kam togɛda wan rigid APET strɔkchɔral layt wit wan polyethylene ɔt-silin layt fɔ thermoformed ɛn fɔm-fil-sil pak.
Wetin APET/PE min?
APET min amorphous polyethylene terephthalate, we PE min polyethylene. APET de gi stiffness ɛn klia, ɛn PE de gi wan ɔt-sial sɔfays.
PET/PE film na di sem wit fleksibul laminate?
Dis prodak na rigid ɔ sɛmi-rigid thermoforming bɔt wɛb pas wan tin fleksibul pauch film. Dɛn mek am fɔ mek tre, kaviti ɛn rigid pak bays.
Wetin na di standad matirial strɔkchɔ?
di standad strכkchכ de yuz wan APET sabstεrayt wit wan aprכksimatli 50 μm LDPE siling layεr. Dɛn kin tɔk bɔt di strɔkchɔ dɛn we dɛn mek fɔ yusɛf.
Us totɛl tiknɛs dɛn de?
HSQY in standad rεnj fכ dis prodak na aprכksimatli 0.23 mm to 0.58 mm. Ɔda strɔkchɔ dɛn de ɔnda prodakshɔn kɔnfɔmeshɔn.
Wetin mek di PE layt kin de arawnd 50 μm?
wan 50 μm PE layεr de gi prεktikal bεlεns fכ hεt-silin pεrformεns, mכsichכ rεsistεns εn fכm bihayv fכ plεnti it-pakεj aplikεshכn dεm.
Yu tink se yu kin kɔstɔmayz di PE tik?
Yɛs. PE tiknes ɛn fɔmyulashɔn kin rivyu akɔdin to sil trɛnk, peel pefɔmɛns, lidding-film kɔmpatibiliti ɛn ɔda kwantiti.
Us sayd na di PE siling sayd?
Di PE sayd na di surface we dɛn mek fɔ kɔntakt di kɔmpatib lidding-film sialant. Di rol fɔ gɛt lɛbl fɔ no di PE sayd ɛn di winding dairekshɔn.
Yu tink se PET/PE film kin thermoformed?
Yɛs. PET/PE film na fɔ vaykum fɔm, prɛshɔn fɔm ɛn thermoform-fil-sil pak we di strɔkchɔ ɛn ɔt prɔses kɔrɛkt wan mach.
Wetin na fɔm-fil-sil pak?
Fכm-fil-sil na כtomatik prכsεs we di bכtכm wεb de fכm insay kכva, fulכp wit prodak εn sial wit tכp film pan di sem prodakshכn layn.
Us it dɛn dɛn kin pak insay PET/PE fim?
Di tipik aplikeshɔn dɛn na mit, bɔd, fish, sifud, chiz, dairy prodakt, fresh pasta, pripia it ɛn kol ɔ frɔzɛn prodak.
PET/PE fayn fɔ it dɛn we gɛt fat ɛn asid?
Dɛn kin yuz wan fayn it-kɔntakt gred fɔ it dɛn we gɛt fat ɔ asid we dɛn sɔpɔt am bay di kɔrɛkt maykreshɔn ɛn kɔmplians tɛst fɔ di dɛstineshɔn makit.
Yu kin yuz PET/PE film fɔ frɔzɛn it?
Dɛn kin yuz gred dɛn we dɛn dɔn pik fɔ frɔzɛn stɔrɔj afta dɛn dɔn tɛst di lɔw-tɛmpracha impak, di sil trɛnk ɛn di paket intɛgriti wit di aktual prɔdak.
Yu tink se dɛn kin yuz PET/PE fim na maykrowev?
Standard APET/PE film nɔ fɔ ɔtomɛtik wan we dɛn tek am se i sef na maykrowev. Dɛn fɔ pik wan sɛpret validet maykrowevable strɔkchɔ usay dɛn nid am.
Yu tink se dɛn kin yuz PET/PE fim na kɔmɔn ɔvin?
Standard APET/PE film nɔ kin pik fɔ kɔvɛnshɔnal-ɔvin pak. CPET na mɔ fit fɔ validet ovenable it trey.
PET/PE film na tin we gɛt ay ɔksijɛn-baria?
Standart PET/PE nכ nכmal fכ klas as dεdiket hεy-כksijεn-bεria strכkchכ. PET/EVOH/PE fɔ evaluate we dɛn nid fɔ transmit ɔksijɛn we rili smɔl.
Wetin na di difrɛns bitwin PET/PE ɛn PET/EVOH/PE?
PET/PE de gi stiffness, transparency ɛn ɔt silin. PET/EVOH/PE ad wan dediket EVOH ɔksijɛn-baria layt fɔ ɔksijɛn-sɛnsitiv ɛn ɛkstend-shɛlf-layf prodak dɛm.
Yu tink se dɛn kin yuz PET/PE fɔ pak MAP?
Dɛn kin yuz am fɔ sɔm MAP aplikeshɔn dɛn, bɔt dɛn fɔ tɛst di OTR we dɛn nid, di gas ritɛnshɔn, lidding film ɛn di prodak shelf layf. Bɔku tɛm, MAP we gɛt ay barɛri kin nid fɔ gɛt EVOH strɔkchɔ.
Wetin na weld-sil PET/PE film?
Weld-sil matirial na fɔ mek wan strɔng, rili pɔrmanent bon wit wan kɔmpatib tɔp film.
Wetin na PET/PE fim we dɛn kin pul?
Dɛn mek matirial we dɛn kin pul fɔ mek di paket intɛgriti we i de alaw di wan dɛn we de bay fɔ pul di fim we de ɔp wit wan fɔs we dɛn kin kɔntrol fɔ opin.
Us liding film dɛn kin yuz?
Di lid film fɔ gɛt sial we kɔmpitabl wit di PET/PE bɔt wɛb. Dɛn kin ebul fɔ evaluate izi-pil, anti-fɔg, ay-baria ɛn MAP tɔp fim dɛn.
Yu tink se anti-fog PET/PE fim de?
Wi kin tɔk bɔt anti-fɔg kɔtin ɔ aditiv fɔ pak we dɛn dɔn kol. di pefomans dipכnt pan tεmprachכ, humidity, fכd mכsishכn εn di tεm we dεn de stכr am.
Yu tink se anti-blɔk ɛn silikon tritmɛnt dɛn de?
Yɛs. Anti-blɔk mastabatch ɔ silikon tritmɛnt kin yuz fɔ impɔtant rol hanlin, denest ɛn thermoforming-layn pefɔmɛns.
Yu tink se dɛn kin yuz PET we dɛn dɔn risaykul?
Strukchɔ dɛn we gɛt RPET kin de. Di risaykul-kɔntinɛnt lɛvɛl dipen pan fud-kɔntakt rigyuleshɔn, klia, mɛkanikal pefɔmɛns ɛn di kɔstɔma rikwaymɛnt.
Yu tink se PET/PE laminated film kin risaykul?
PET/PE na wan strɔkchɔ we gɛt bɔku tin dɛn. Risaykul akseptɛns dipen pan in dizayn, PE prɔpɔshɔn, lamineshɔn sistɛm ɛn lokal PET-risaykul infrastukchɔ.
Us kɔr saiz dɛn de?
Standart opshɔn dɛn inklud 3-inch ɛn 6-inch kɔr. Di kɔr matirial, di tik we di wɔl tik ɛn di waid fɔ mach wit di wet ɛn di mashin we di rol gɛt.
Yu tink se dɛn kin kɔstɔmayt di rol wit ɛn dayamita?
Yɛs. Rol width, dayamita, wet ɛn winding dairekshɔn kin kɔstɔmayz akɔdin to di thermoforming ɔ FFS mashin.
Wetin na di MOQ?
Di standad MOQ insay di ditayl spɛsifikɛshɔn na lɛk 1,000 kg. Struktrɔ, kɔlɔ ɛn kɔtin dɛn we dɛn kɔstɔmayt kin nid difrɛn kwantiti.
Yu tink se sampul dɛn de?
A4 shit ɔ limited rol sɛmpul kin de fɔ fɔm, sial, klia ɛn barɛri ɛvalueshɔn. Nɔmal wan na di pɔsin we bay di tin kin pe fɔ di freyt we dɛn kin kɛr go.
Wetin na di prodakshɔn lida tɛm?
Tipik prodakshɔn kin tek lɛk 10-14 dez afta dɛn dɔn kɔnfyus di spɛsifikɛshɔn, kwantiti, pak ɛn pe.
Us infɔmeshɔn dɛn nid fɔ kot?
Gi di totɛl tiknes, PET ɛn PE layers, rol wit, kɔr, dayamita, prodak tayp, siling we, lidding film, barɛri rikwaymɛnt, kwantiti ɛn dɛstineshɔn.
Get wan Kastom PET/PE Film Kot
