HSQY 0.5mm Klia Tin PETG Plastik Shit 7 Sayz fɔ Pik

0.5mm Klia PETG Shit fɔ Blista Pakɛj

HSQY 0.5mm klia PETG shit na transparent glycol-modified copolyester sheet we dɛn mek fɔ blista pak, vaykum fɔm, thermoforming, transparent pak, protɛktiv kɔva ɛn laytwɛt fabricated plastic kɔmpɔnɛnt dɛn.

pan nominal tik we na 0.5mm, כ 500 maykron, PETG de gi yusful bεlε fכ transparency, taf, fεksibiliti εn fכm pεrformεns. I patikyula fayn fɔ thermoformed blister pak ɛn laytwɛt fɔm pat usay prodak visibiliti ɛn dimɛnshɔnal kɔnsistɛns impɔtant.

HSQY de saplae PETG insay shit ɛn rol fɔmat. Di prɔdak infɔmeshɔn we de naw de list di rol wit frɔm lɛk 110mm to 1280mm, standad shit dɛn we inklud 915 × 1220mm ɛn 1000 × 2000mm, ɛn kɔstɔmayz dimɛnshɔn fɔ industrial kɔnvɔtin prɔjek dɛn.

כda PETG tiknes frכm aprכksimatli 0.15mm to 7mm dεn rεfrεns insay di prכdak infכmeshכn we de naw. Avaylabl fɔ kɔnfɔm akɔdin to tik, rol ɔ shit fɔmat, fɔm rikwaymɛnt ɛn ɔda kwantiti.

PETG Teknik Data Shit

Daunlod di PETG teknikol data sheet we de fɔ rɛfrɛns. Di wan dɛn we de bay fɔ kɔnfɔm se di dɔkyumɛnt de aplay to di ɛksaktɔl PETG rɛsin gred, tiknɛs, sɔfa ɛn spɛsifikɛshɔn we dɛn de kot.

Wetin Na Klia PETG Shit?

PETG na glycol-modified kכpoliεsta we riliyt to PET . di glycol modifyushכn de chenj kristalizεshכn bihayv εn i de εp PETG mεnten yusful transparency εn tכfnεs di tεm we plεnti tεmכfכm εn fכbrikεshכn prכsεs dεm de.

Klia PETG na tin we dɛn kin pik usay transparent tɛmplastik nid fɔ fɔm wit vaykum, fɔm prɛshɔn, kɔt, day kɔt, panch, drɔl, rout, print, bɛn ɔ bon.

We yu kɔmpia am wit kɔvɛnshɔnal akrilik, PETG jɔs de gi big rɛsistɛns to chip ɛn krak we dɛn de du bɔku fabrikeshɔn ɔpreshɔn. We yu kɔmpia am wit standad APET , PETG na patikyula yusful usay izi fɔm ɛn ridyus kristalizashɔn di tɛm we dɛn de prosɛs impɔtant.

0.5mm Klia PETG Shit Spɛsifikeshɔn dɛn

Di wɛbsayt naw gɛt difrɛn tik rɛnj dɛn na difrɛn say dɛn na dis prɔdak pej. Bifo dɛn pablish am, HSQY fɔ kɔnfɔm di ɛksaktɔ tiknɛs rɛnj we de ɛn mek di prɔdak atribyut dɛn, diskripshɔn ɛn Prodakt Skima kɔnsistɛns.

Wetin Mek Yu Pik 0.5mm PETG Shit?

Balans fɔ Fleksibiliti ɛn Rigiditi

pan 0.5mm tik, PETG de stil rili fleksibul we i de gi mכr bכdi εn dimεnshכnal stεbiliti pas vεri tin pak film dεm. dis de mek i yusful fכ laytwεt fכm pak, transparent kכva εn blista kכmכpכnt dεm.

Ay Prodakt Visibiliti

Klia PETG de gi ay transparency fɔ rital pakej ɛn fɔm kɔmpɔnɛnt usay di prɔdak nid fɔ kɔntinyu fɔ si tru di plastic.

Tɛmofɔmin Pɔfɔmɛnshɔn

PETG na tin we dɛn kin yuz bɔku bɔku wan fɔ thermoforming bikɔs di rayt gred dɛn kin riprodyuz ditayla mold jɔyometri we dɛn de kip yusful klia ɛn taf.

Resistans to Chip ɛn Krak

PETG jεnarali de gi yusful taf we dεn de kכt, drכl εn fכm, we de εp fכ ridyus britl chip kכmpεr wit mכr brit transparent plastic dεm insay plεnti fכbrikεshכn aplikεshכn dεm.

Shit ɛn Rol Sapɔt

0.5mm PETG kin rili impɔtant to ɔl tu di sheet-fed ɛn rol-fed kɔnvɛnshɔn dipen pan mashin dizayn, we de alaw bayer dɛn fɔ pik wan sapɔt fɔmat we mach di dawtstrim prɔses.

0.5mm PETG Shit fɔ Blista Pakɛj

Blista pak de yuz wan fכm transparent wεb fכ mek wan kכva rawnd wan prodak. Klia PETG kin evalyu as fכm mεtirial fכ rital blista pak usay transparency, mold difinishכn εn rεsistεns to krak we dεn de fכm implεnt.

na 0.5mm stat tik, PETG na patikyular rilevεnt to laytwεt εn mεdiכm-dip blista kכmכpכnεnt dεm. Faynal suitabiliti dipen pan di kaviti dip, dro rεshכ, kכna rayus, prodakt wet εn rikwayd fayn wכl tik.

Blista paket kin yuz difrɛn we dɛn fɔ lɔk, lɛk fɔ sial kad, fɔ kapchɔ wit mɛkanikal, dizayn dɛn we tan lɛk klamshɛl ɔ ɔda pak sistɛm dɛn. Siling kompitibiliti fɔ evaluate akɔdin to di aktual kɔtin, adeziv, sabstret ɛn ikwipmɛnt pas fɔ asum ɛvri PETG shit sial to ɛvri bak matirial.

PETG Shit fɔ Vaykum Fɔm

Vaykum fɔm de ɔt PETG te i bi fɔm ɛn afta dat i de yuz vaykum fɔ drɔ di shit agens wan mold sɔfays. PETG na tin we dɛn kin pik bikɔs di gred dɛn we fit kin mek ditayla shep dɛn we nɔ gɛt di brit bihayvya we gɛt fɔ du wit sɔm transparent plastic dɛn.

Impɔtant vaykum-fɔm paramita dɛn inklud ɔt yunifɔmiti, shit tɛmpracha, vaykum lɛvɛl, mold dizayn, draft angle, kɔna rayus, fɔm dip ɛn kol kɔndishɔn.

Dip fɔm de strɛch di sheet ɛn ridyus di lokal wɔl tik. 0.5mm statin shit kin bi fכ dat fכ shalo כ mכdarεt fכm bכt i kin tu tin fכ dip kכva we nid sכbstanshכl finish-wכl rigiditi.

Tεrmoforming 0.5mm PETG Shit

PETG kin yuz in vaykum fכm, prεshכn fכm εn כda tεmכfכm prכsεs dεm we di gred we dεn sεlekt, hεt kכndishכn εn mold disayn aprכpriet.

Bɔku tɛmfɔmin PETG gred dɛn we dɛn mek fɔ prosɛs witout wan sɛpret prɛdray stɛp we dɛn kip ɛn handle kɔrɛkt wan, bɔt dis nɔ fɔ trit am lɛk yunivasal lɔ. Fɔ fala di prɔsesin gayd fɔ di ɛksaktɔl rɛsin gred ɛn chɛk di shit kɔndishɔn bifo dɛn prodyuz.

Protektiv masking fɔ nɔmal fɔ rivyu bifo dɛn ɛkspos to fɔm ɔt. Rimov masking frɔm di hot fɔm eria pas di masking spɔlayt kɔnfyus se i kɔmpitabl wit di intended thermoforming prɔses.

Wetin De Ditarmin PETG Fɔm Kwaliti?

0.5mm PETG Shit Prodakt ɛn Aplikeshɔn Imej dɛn

PETG vs APET vs PVC fɔ Blista Pakɛj

Di bɛst matirial dipen pan di finish blista dizayn, fɔm dip, transparency we nid, stiffness, impak pefɔmɛns, printin ɔ siling prɔses, rigyuletɔri rikwaymɛnt ɛn target kɔst.

Kɔt, Day Kɔt ɛn Fabrikeshɔn

Fɔ kɔt

Tin PETG shit kin kɔt yuz fayn gilɔtin, shap naif, shia ɔ industrial kɔt ikwipmɛnt dipen pan volyum ɛn dimɛnshɔnal rikwaymɛnt.

Day Kɔt ɛn Panch

0.5mm PETG kin evalyu fɔ day kɔt ɛn panch fɔ pak, insɛt, kɔva ɛn print kɔmpɔnɛnt dɛn. Di tul jɔyometri ɛn kliarens fɔ mach wit di tik we di shit tik.

Drilin ɛn Routing

PETG kin drɔ ɛn rout yuz di rayt tul. Sɔpɔt di shit kɔrɛkt wan ɛn kɔntrol di ɔt jenɛreshɔn fɔ ridyus di mɛlt, rɔf ed ɔ distɔshɔn.

Bonding we gɛt fɔ du wit dɛnsɛf

PETG kin bond yuz kompitibul adhesive o solvent-based sistem, bכt kεmikכl kompitibiliti, apinεns εn jכyn trεnk fכ tεst pan di εksakεt PETG gred bifo prodyushכn.

Print ɛn Dɛkɔreshɔn fɔ PETG Shit

Klia PETG kin yuz fɔ print pak, rital displei, grafik kɔmpɔnɛnt ɛn dɛkɔret transparent pat. Skrin printin, UV dijital printin ɛn ɔda we dɛn kin pɔsibul dipen pan di sheet surface ɛn ink sistem we yu dɔn pik.

Bifo bulk prodakshɔn, tɛst ink adheshon, curing temperechur, skrach, bɛnd ɛn thermoforming if printin apin bifo fɔm. Ink sistem we de du fayn pan flat sheet kin biev difrɛn afta dɛn dɔn strɛch di PETG we dɛn print oba mold.

Optik Kwaliti Rikwaymɛnt dɛn

'Klia PETG ' nɔmɔ nɔ de difayn ɔl di optik rikwaymɛnt dɛn. Fɔ pak ɔ displei aplikeshɔn usay vijual kwaliti impɔtant, di wan dɛn we de bay fɔ spɛsifa akseptabl layt transmishɔn, haz, glos, tint ɛn sɔfa-difɛkt limit.

Protective masking kin ɛp fɔ mek yu nɔ skrach we yu de handle ɛn fabrication. If yu nid fɔ mask, sho wan sayd ɔ tu sayd protɛkshɔn ɛn if leta dɛn go print di sheet, fɔm ɔ lamin.

PETG I fayn fɔ yuz na do?

Standard klia PETG nɔ fɔ ɔtomɛtik diskrayb as lɔng tɛm ɔdasay ɔ UV-rɛsistant shit. If yu de na di san ɛn di wɛda fɔ lɔng tɛm, i kin afɛkt di we aw yu luk ɛn di mɛkanikal prɔpati dɛn dipen pan di PETG gred.

If dɛn go yuz di prɔdak we dɔn dɔn na do, sho di savis layf we dɛn de op fɔ, di say we dɛn de, di say we dɛn de yuz di UV ɛn di tin dɛn we de apin na di envayrɔmɛnt. Dɛn fɔ pik wan gred we UV-stabilized ɔ UV-protected we nid de ɛn sɔpɔt am wit aplikebul tɛknikal dɔkyumentri.

PETG I Fayn fɔ Fɔd Kɔntakt?

Sɔm PETG rɛsin gred dɛn de prodyuz fɔ it-kɔntakt aplikeshɔn, bɔt it-kɔntakt suitabiliti nɔ fɔ asum fɔ ɛvri PETG fɔmyulashɔn, kɔlɔ ɔ aditiv pakej.

Fɔ pak it, gi di dɛstineshɔn makit, di kayn it, kɔntakt tɛmpracha ɛn di tɛm we i fɔ tek. HSQY fɔ kɔnfɔm di aplikebul dɔkyumentri fɔ di ɛksaktɔl rɛsin ɛn shit spɛsifikɛshɔn we dɛn de saplae.

Aplikeshɔn dɛn fɔ 0.5mm Klia PETG Shit

Ritayl Blista Pakɛj

Transparent PETG blista komponent kin gi ay prodak visibiliti fɔ hadwae, ilɛktronik aksesɔri, kɔsmɛtik, steshɔnari, tɔys ɛn ɔda rital prodak.

Pakɛj we dɛn mek wit vaykum

PETG kin yuz fɔ laytwɛt transparent fɔm trey, insɛt, kɔva ɛn prodak-holdin kɔmpɔnɛnt dɛn we dɛn de fɔm dip ɛn fayn wɔl tiknɛs fit fɔ 0.5mm stat stok.

Prototayp we dɛn de pak

Kɔt PETG shit dɛn yusful fɔ pak trayal, mold tɛst ɛn protɔtayp thermoforming bifo prodakshɔn tul ɛn fayn sheet spɛsifikɛshɔn dɛn apruv.

Transparent Kɔva ɛn Gad dɛn

Tin PETG kin tink bɔt fɔ laytwɛt transparent kɔva, gad, ɔvlay ɛn protɛktiv kɔmpɔnɛnt usay 0.5mm tiknɛs de gi inof rigiditi.

Di Kɔmpɔnɛnt dɛn fɔ Print ɛn Displei

Klia PETG kin evalyu bak fɔ indo displei kɔmpɔnɛnt dɛn, print ɔvlay, sayn ɛlimɛnt dɛn ɛn transparent grafik panɛl dɛn.

Aw fɔ Pik di Kɔrɛkt PETG Shit

1. Kɔnfɔm di Starting Tiknɛs

kכnfכm if 0.5mm de gi inof finish-wכl tik afta i fכm. Dip kaviti dεm jεnarali nid mכr statin mεtirial.

2. Spɛsifik Sheet ɔ Rol

Kɔntinyu thermoforming layn dɛn kin yuz rol stok, we protɔtayp wok, manual fɔm ɛn shit-fed sistem kin nid flat kɔt sheet.

3. Difayn di Optik Rikwaymɛnt

Spɛsifik klia, haz, glos, tint ɛn alawable sɔfays dɛfɛkt if di apinɛns impɔtant.

4. Gi di Blister ɔ Mold Drawing

di dimεnshכn dεm na di mold, di dip we di kaviti, di kכna rayus εn di draft angul dεm de εp fכ no if 0.5mm PETG fayn.

5. Kɔnfɔm Dɔwnstrim Prɔsesin

Tɛl HSQY if di matirial go print, kɔt, lamin, glu, day kɔt ɔ sial to ɔda sabstret.

6. Kɔnfɔm di Rigyuletɔri Rikwaymɛnt dɛn

Fɔd-kɔntakt, mɛdikal, flame-retardant, antistatik ɛn ɔda rigyulayt ɔ funkshɔn rikwaymɛnt dɛn nid spɛshal kwalifay gred ɛn rilevɛns dɔkyumentri.

Kastom PETG Shit ɛn Rol Opshɔn dɛn

• 0.5mm / 500μm ficha tiknes.

• Ɔda PETG tiknɛs dɛn we de ɔnda prodakshɔn kɔnfɔmeshɔn.

• Kastom slit rol wit dɛn.

• Kastom sheet lɔng ɛn wit.

• Kɔt-to-sayz PETG sheet dɛn.

• Kla ɛn kɔstɔmayt kɔlɔ dɛn.

• Wan-sayd ɔ tu-sayd protɛktiv masking.

• Optik rikwaymɛnt dɛn inklud haz ɛn transmishɔn target dɛn.

• Printin-grɛd spesifikeshɔn dɛn.

• Food-contact PETG gred wit aplikebul dokumɛnt usay i de.

• Speshal UV, antistatic ɔ ɔda funkshɔnal gred dɛn we de ɔnda kwalifayeshɔn.

• Kastom ɛkspɔt pak ɛn palet mak.

Infɔmeshɔn we dɛn nid fɔ wan PETG Shit Kɔt

• Tik we dɛn nid.

• Shit dimɛnshɔn ɔ rol wit.

• Rikwayd dimɛnshɔnal tolɛreshɔn.

• Rol kor saiz ɛn maksimal rol dayamita if rol stok nid fɔ de.

• Klia ɔ kɔstɔmayt kɔlɔ.

• Rikwayd optik klia, haz ɔ glos.

• Wan-sayd ɔ tu-sayd protɛktiv masking rikwaymɛnt.

• Blister ɔ thermoformed-pat drɔin.

• Cavity dip ɛn drɔ ratio if dɛn no.

• Vaykum-fɔmin ɔ thermoforming mashin mɔdel.

• Print, kɔt, bond ɔ sial rikwaymɛnt.

• Fɔd-kɔntakt ɔ ɔda tin dɛn we di lɔ se fɔ du.

• Ɔda kwantiti ɛn ɛni ia kɔnsɔmshɔn.

• Di tin dɛn we dɛn nid fɔ pak ɛn palet.

• Di kɔntri we dɛn de go ɛn di pɔt.

Sɛtifiket ɛn Tɛknikal Dokumɛnt dɛn

Di sɛtifiket pikchɔ we de dɔŋ ya, dɛn kin kip am frɔm di ɔrijinal prɔdak pej. Di wan dɛn we de bay fɔ kɔnfɔm di kɔrɛnt sɛtifiket vɛshɔn, di ɔganayzeshɔn we de gi, di validiti ɛn di skɔp bifo dɛn abop pan am fɔ wan patikyula ɔda.

Wan jenɛral kwaliti-mɛnejmɛnt sɛtifiket nɔ de sho ɔtomɛtik wan fɔ mek yu kɔntakt it, mɛdikal, UV, we nɔ de mek faya ɔ ɔda aplikeshɔn-spɛsifi k kɔmplians. Rikwest dɔkyumentri fɔ di ɛksaktɔl PETG gred usay dɛn rikwaymɛnt ya de aplay.

HSQY Plastik Grup Ɛgzibishin

Di ɔrijinal ɛgzibishin imej de dɔŋ ya. HSQY de tek pat pan industri ɛgzibishin fɔ tɔk bɔt PETG , PET , PVC ɛn ɔda plastic sheet ɛn pak projɛkt dɛn wit intanashɔnal bayer dɛn.

PETG Shit Pak ɛn Delivri

Kwɛshɔn dɛn we dɛn kin aks bɔku tɛm bɔt 0.5mm PETG Sheet

Wetin na 0.5mm PETG sheet?

na klia glycol-modified copolyester sheet wit nominal tiknes we na 0.5mm, we ikwal to 500 maykron. Dɛn kin yuz am fɔ pak blista, fɔm vaykum, fɔ mek tɛmmofɔm ɛn fɔ mek layt we transparent kɔmpɔnɛnt dɛn.

0.5mm PETG fit fכ blista pak?

Yes, dεn kin evaluate 0.5mm PETG fכ transparent blista pak. Suitabiliti dipen pan di kaviti dip, prodak wet, mold jɔyometri ɛn rikwayd finish-wɔl tik.

Yu tink se 0.5mm PETG kin bi vaykum fɔm?

Yɛs. di rayt PETG gred dεm kin fכm vεkyum insay blista pak, transparent kכva, pak insεt εn כda laytwεt fכm kכmכpכnεnt dεm.

Aw tik na 0.5mm insay maykron?

0.5mm ikwal to 500 maykron.

Us sheet saiz dɛn de?

Di infɔmeshɔn bɔt di prɔdak naw de sho standad shit dɛn we inklud 915 × 1220mm ɛn 1000 × 2000mm. Wi kin tɔk bak bɔt di saiz dɛn we dɛn kɔt di kɔstɔm.

Yu tink se PETG kin saplae insay rol?

Yɛs. Di HSQY prodak infɔmeshɔn we de naw de list di rol wit frɔm lɛk 110mm to 1280mm. Faynal avaylabl dipen pan tik, rol OD, kor saiz ɛn prodakshɔn rikwaymɛnt.

PETG nid predrying bifo thermoforming?

Bɔku PETG tɛmfɔmin gred dɛn kin prosɛs witout sɛpret prɛdray we dɛn kip dɛn kɔrɛkt wan, bɔt dis kin dipen pan gred ɛn kɔndishɔn. Fɔ fala di tɛknikal gayd fɔ di ɛksaktɔ PETG rɛsin we dɛn de gi.

Us tɛmpracha a fɔ yuz fɔ thermoform PETG ?

di korekt fכm tεmprachכ dipכnt pan di PETG gred, shit tik, hεt sistεm, mold, dro dip εn saykl tεm. Yuz di gred-spɛsifi k prɔsesin gayd ɛn prodakshɔn trayal pas fɔ aplay wan yunivasal tɛmpracha.

Yu tink se PETG kin day kɔt?

Yɛs. Tin PETG kin day kɔt ɛn panch wit di rayt tul. Tul kliarens ɛn day jɔyometri fɔ mach to di tik we di shit tik ɛn di pat dizayn.

Yu tink se PETG kin print?

Yu kin print PETG sheet dɛn we yu dɔn pik na skrin, print dijital ɔ dɛkɔret bay we yu yuz ink ɛn prɔses we kɔmpitabl. Print adheshon ɛn fɔm pefɔmɛns fɔ tɛst bifo dɛn prodyuz.

PETG fayn fɔ sayn dɛn we de na do?

Standard PETG nɔ fɔ ɔtomɛtik trit am lɛk lɔng tɛm ɔdasay sheet. Di projɛkt dɛn we de na do fɔ yuz gred we UV-stabilized ɔ UV-protected we fit fɔ di klaymat ɛn savis layf we dɛn nid.

PETG fayn fɔ pak it-kɔntakt?

Sɔm PETG gred dɛn kin fayn fɔ yuz fɔ it-kɔntakt. HSQY fɔ kɔnfɔm di ɛksaktɔl rɛsin gred ɛn aplikebul dɔkyumentri fɔ di dɛstineshɔn makit ɛn di kɔntakt kɔndishɔn dɛn we dɛn bin want.

Wetin na di difrɛns bitwin PETG ɛn APET ?

Dɛn tu kin gi ay transparency. PETG in glycol modifyeshכn na patikyula yusful usay izi tεmכfכm, tכf εn rεsistεns to strεs waytin כ krak we dεn de fכm na prayorities, we APET dεn de yuz am bכku bכku wan insay rigid tεmכfכm pak usay stiffnεs εn kכst imכtant.

Yu tink se dɛn kin mek kɔstɔm PETG saiz dɛn?

Yɛs. Dɛn kin tɔk bɔt di kɔstɔm kɔt shit ɛn slit rol wit akɔdin to di tik, dimɛnshɔn, tolɛreshɔn ɛn ɔda kwantiti.

Wetin na di MOQ?

Di kɔrɛnt wɛbsayt spɛsifikɛshɔn de list wan MOQ we na 1000kg. Speshal kala, funkshɔnal gred ɔ kɔstɔm kɔnvɛnshɔn kin gɛt difrɛn minim kwantiti.

PETG sampul dɛn de?

Sampul avaylabl kin bi diskos fɔ PETG spɛsifikɛshɔn dɛn we dɔn de. Fɔ blista pak ɛn thermoforming projɛkt, dɛn fɔ tɛst sɛmpul dɛn wit di aktual fɔm mashin ɛn mold bifo bulk aprɔval.

Us infɔmeshɔn dɛn nid fɔ kot?

Duya gi tik, shit ɔ rol dimɛnshɔn, optik rikwaymɛnt, fɔm dip, blista drɔ, pak-mashin infɔmeshɔn, protɛktiv mask, fɛnshɔnal rikwaymɛnt, ɔda kwantiti ɛn di kɔntri we yu de go.

Wetin Mek Yu Pik HSQY 0.5mm PETG Shit?

HSQY de saplae klia PETG shit ɛn film fɔ blista pak, vaykum fɔm, tɛmfɔmin, printin, displei ɛn ɔda industrial kɔnvɔshɔn aplikeshɔn dɛn.

Di kɔrɛnt prodak sɔs de rɛfrɛns fayv prodakshɔn layn ɛn lɛk 50 tan ɛvride kapasiti. Prodakshɔn scheduling fɔ wan patikyula PETG tik, wit, kɔlɔ ɔ gred fɔ kɔnfɔm we dɛn kot.

Fɔ blista pak projɛkt, sɛn HSQY yu finish blista drɔin, fɔm dip, kɔrɛnt matirial spɛsifikɛshɔn ɛn mashin infɔmeshɔn. Dis de alaw fɔ ebul fɔ evaluate di statin PETG tiknes, shit ɔ rol dimɛnshɔn ɛn matirial gred agens di finish pakej rikwaymɛnt.