HSQY 0.5mm klia PETG plastik sheet matirial

0.5mm Klia PETG shit fɔ Tɛmofɔmin & Fabrikeshɔn

HSQY 0.5mm klia PETG sheet matirial na transparent glycol-modified copolyester sheet matirial we dɛn mek fɔ thermoforming, vaykum fɔm, printin, displei, protɛktiv kɔva, pak ɛn fabricated plastic kɔmpɔnɛnt dɛn.

Na wan nominal tiknes we na 0.5mm, ɔ 500 maykron , PETG de gi yusful balans bitwin fleksibiliti, transparency ɛn dimɛnshɔnal stebiliti. I patikyula fayn fɔ laytwɛt tɛmɔfɔm pat dɛn, pak protɔtayp dɛn, transparent kɔva dɛn, print displei kɔmpɔnɛnt dɛn ɛn ɔda aplikeshɔn dɛn usay rili tik rigid sheet matirial nɔ nid.

HSQY de saplae PETG insay ɔl tu di rol ɛn sheet matirial fɔmat dɛn. Di prodak rɛnj we de naw inklud rol wit frɔm lɛk 110mm to 1280mm , standad sheet matirial s inklud 915×1220mm ɛn 1000×2000mm , ɛn kɔstɔmayz dimɛnshɔn fɔ industrial kɔnvɔshɔn.

Dis pej de fos speshali pan 0.5mm klia PETG sheet matirial . כda PETG tiknes frכm aprכksimatli 0.15mm to 7mm kin tכk bכt sεparat wan akɔdin to fכm dip, rigiditi, rol כ sheet matirial fכmat εn εnd-yuz rikwaymεnt.

       Rikwest 0.5mm PETG shit Kot    

Wetin Na Klia PETG shit ?

PETG na glycol-modified kכpoliεsta we riliyt to PET . Glycol modifyushכn de ridyus di tεndens fכ di mεtirial fכ kristכlayz di tεm we nכmal sheet matirial prכsεsin de εp PETG mεnten transparency we i de gi yusful tεmכfכm εn fכbrikeshכn pεrformεns.

PETG na valyu fɔ in kɔmbaynshɔn fɔ optik klia, tafnɛs ɛn rili fɔgiv fabrikeshɔn kwaliti dɛn. Dipen pan gred ɛn tik, i kin fɔm vaykum, fɔm prɛshɔn, kɔt, day-kɔt, panch, drɔl, rout, bɛn, print ɛn bon.

We yu kɔmpia am wit standad klia akrilik, PETG jɔs de mɔ rɛsistɛns to chip ɛn krak we dɛn de mek am. We yu kɔmpia am wit polycarbonate, PETG kin gi izi fɔm ɛn fabrication fɔ bɔku indo displei, pak ɛn fabricated-plastic aplikeshɔn.

PETG Teknik Data Shit

Di PETG data sheet matirial we de kam biɛn ya, dɛn kip am frɔm di ɔrijinal HSQY prodak pej. Di wan dɛn we de bay fɔ kɔnfɔm se di dɔkyumɛnt de aplay to di ɛksaktɔl PETG gred, tik ɛn spɛsifikɛshɔn we dɛn de kot.

           PETG Film Teknik Data Shit PDF    

0.5mm Klia PETG shit Spɛsifikeshɔn dɛn

Di prodak we dɛn sho na dis pej na nominally 0.5mm tik. Di brayt HSQY PETG rɛnj de kɔba ɔda gej dɛn, bɔt di wan dɛn we de bay fɔ spɛsifa di ɛksaktɔ tik, tolɛreshɔn, dimɛnshɔn, optik rikwaymɛnt ɛn prɔsesin we dɛn de aks fɔ kot.

Wetin Mek Yu Pik 0.5mm PETG shit ?

Yuzful Balans fɔ Fleksibiliti ɛn Rigiditi

na 0.5mm, PETG na sכbstanshכl tin εn mכr fleksibul pas mכlti-milimita rigid panεl dεm we i stil de gi mכr bכdi pas vεri tin pak film. Dis de mek di gej fayn fɔ laytwɛt fɔm kɔmpɔnɛnt dɛn, kɔva, ɔvlay, pak ɛn pat dɛn we dɛn mek.

High Visual Clarity we pɔsin kin si

Klia PETG fayn fɔ aplikeshɔn usay prodak visibiliti, print grafik ɔ transparent protɛktiv kɔvarej impɔtant. Baya dɛn wit optik rikwaymɛnt fɔ spɛsifa layt transmishɔn, haz, sɔfayz kwaliti ɛn akseptabl difrɛns.

Gud Tɛmofɔm Kapabiliti

PETG na wan we dɛn kin pik bɔku bɔku wan fɔ vaykum ɛn prɛshɔn fɔm bikɔs fayn gred dɛn kin riprodyuz ditayla mold jɔyometri we dɛn de mentɛn yusful klia ɛn tafnɛs.

Resistans to Chip ɛn Krak

PETG jεnarali de gi strכng rεsistεns to chip εn krak pas kכvεshכnal akrilik di tεm we dεn de du plεnti fכbrikshכn כpεreshכn, we de mek i atraktiv fכ dril, panch, fכm εn fכbrik transparent kכmכpכnεnt dεm.

Izi Mekanikal Fabrikeshɔn

Dipen pan tik ɛn gred, dɛn kin kɔt PETG bay mashin, day-kɔt, panch, drɔl, rout, skor ɛn bɛn yuz fayn tul ɛn prɔsesin kɔndishɔn.

Tεrmoforming 0,5mm PETG shit

0.5mm PETG na patikyula tin we rili impɔtant to laytwɛt tɛmɔfɔm prodakt bikɔs dɛn kin ɔt di matirial ɛn drɔ oba ɔ insay mold we nɔ nid di matirial tik we gɛt fɔ du wit strɔkchɔral plastic panɛl dɛn.

di pכtεnshal prכsεs dεm inklud vεkyum fכm, prεshכn fכm εn כda tεmכfכm mεtכd dεm we fit di PETG gred we dεn sεlekt.

Fɔm pefɔmɛns dipen pan mɔ pas nominal sheet matirial tik. Mold dip, drɔ ratio, draft angle, kɔna rayus, itin sistɛm, mold tɛmpracha, plɔg ɛp ɛn saykl tɛm ɔl de inflɔws fayn wɔl-tiknɛs distribyushɔn ɛn klia.

Bɔku PETG tɛmɔfɔmin gred dɛn kin prosɛs witout wan sɛpret prɛdray stɛp we dɛn kip ɛn handel kɔrɛkt wan, bɔt dis nɔ fɔ trit am lɛk yunivasal lɔ. Fɔ fala di tɛknikal data sheet matirial fɔ di ɛksaktɔl rɛsin gred ɛn chɛk di matirial kɔndishɔn bifo dɛn prodyuz.

Wetin Dɛn kin Tɛmofɔm frɔm 0.5mm PETG ?

PETG shit Fabrikeshɔn Mɛtɔd dɛn

Kɔt ɛn Day Kɔt

Tin 0.5mm PETG kin kɔt yuz fayn naif, gilɔtin, day ɔ prodakshɔn kɔt ikwipmɛnt. Tul shapnɛs ɛn kɔt kliarens fɔ optimiz fɔ avɔyd bɔku bɔku bur ɔ edj difɔmeshɔn.

Panch ɛn Dril

PETG in tafnɛs de mek i fayn fɔ bɔku panch ɛn drɔl kɔmpɔnɛnt dɛn we dɛn yuz di rayt tul, fid spid ɛn edj distans.

Bɛnd ɛn Kol Fɔm

Sεlekt PETG kכmכpכnt dεm kin bεn כ kol fכm. Minimum radius ɛn fɔm mɛtɔd fɔ establish tru trayal fɔ avɔyd strɛs mak ɔ dimɛnshɔnal distɔrshɔn.

Bonding we gɛt fɔ du wit dɛnsɛf

PETG kin bond yuz fayn adhesive ɔ wɛldin sistem. Dɛn fɔ tɛst di adhesive compatibility bikɔs sɔm kemikal dɛn kin afɛkt di we aw pɔsin de luk ɔ mek i strɛs krak.

Print ɛn Dɛkɔret

PETG kin print, peint, dɛkɔret ɔ hot stamp we di ink, prɛtritmɛnt ɛn kɔring sistɛm kɔmpitabl wit di sɔfays we yu dɔn pik.

Klia PETG shit Aplikeshɔn dɛn

Vaykum Fɔm ɛn Tɛmofɔmin

PETG na wan we dɛn kin pik bɔku bɔku wan fɔ fɔm transparent kɔmpɔnɛnt dɛn, pak, protɔtayp ɛn kɔva usay klia apinɛns ɛn rili izi fɔm nid fɔ de.

Ritayl Displei ɛn POP Kɔmpɔnɛnt dɛn

Klia PETG fayn fɔ pɔynt-ɔf-pɔch displei, transparent shelf, ɔlda, mɛnyu kɔmpɔnɛnt ɛn mɛkshɛniz fiks usay klia ɛn fabrikeshɔn pefɔmɛns impɔtant.

Sayn dɛn we dɛn kin put

PETG kin yuz fɔ sɔm sayn dɛn we dɛn dɔn pik insay os ɛn grafik dɛn we dɛn print. Lɔng tɛm ɔda sayn fɔ yuz wan spɛshal validet UV-rɛsistant ɔ UV-kɔɛkstrud PETG gred.

Protektiv Kɔva ɛn Baf

PETG kin mek am klia laytwɛt gad, kɔva ɛn baf usay di tik we dɛn pik de gi inof stiffness ɛn impak pefɔmɛns.

Di we aw dɛn de pak di tin dɛn

Dɛn kin yuz di rayt PETG gred fɔ transparent pak, fɔm insɛt, bɔks ɛn ɔda pak kɔmpɔnɛnt dɛn. Fɔd-kɔntakt aplikeshɔn dɛn nid fɔ gɛt rɛsin gred ɛn prodakshɔn spɛsifikɛshɔn we dɛn sɔpɔt bay aplikeshɔn dɔkyumentri.

Kad ɛn Tin dɛn we Dɛn Print

PETG ɛn rilat kɔpɔlyɛst matirial dɛn kin yuz insay sɔm kad ɛn print-laminat strɔkchɔ usay transparency, printabiliti, bonding ɛn fleks pefɔmɛns mit di finish-kad spɛsifikɛshɔn.

PETG Aplikeshɔn Imej dɛn

PETG vs Akrilik vs Polikabɔnɛt

Yu tink se Standard PETG fit fɔ yuz na do?

Standard klia PETG nɔ fɔ ɔtomɛtik makɛt as lɔng tɛm ɔdasay weta-rɛsistant sheet matirial .

εkstend כltra vayolet εkspכzכn kin afekt di apinεns εn prכpati dεm fכ standad PETG . Aplikeshɔn dɛn lɛk sayn dɛn we de na do, gad dɛn we de na do ɔ displei dɛn we de na do fɔ spɛsifa wan UV-stabiliz ɔ UV-protɛkt PETG gred we dɛn dɔn divɛlɔp fɔ di savis ɛnvayrɔmɛnt we dɛn de ɛkspɛkt.

Baya dɛn we nid UV rɛsistɛns fɔ gi di savis tɛm we dɛn de ɛkspɛkt, di say we dɛn de, di tɛmpracha rɛnj ɛn di wɛda standad pas fɔ abop pan wan jenɛrik 'weda rɛsistɛns' klem.

Fɔd-Kɔntakt PETG shit

PETG de insay gred dɛn we dɛn mek fɔ it-kɔntakt aplikeshɔn, bɔt it-kɔntakt kɔmplians na gred-spɛsifi k pas fɔ bi ɔtomatik prɔpati fɔ ɛvri transparent PETG sheet matirial .

Bayer dɛn we nid fɔ pak it fɔ spɛsifa di dɛstineshɔn makit, di kayn it, di tɛm we dɛn kɔntakt, kɔntakt tɛmpracha ɛn di we aw dɛn want fɔ fɔm. HSQY fɔ dɔn gi dɔkyumentri we aplay to di ɛksaktɔ rɛsin ɛn dɔn sheet matirial spɛsifikɛshɔn.

Fɔd-kɔntakt suitability nɔ fɔ infɛr ɔl frɔm wan jenɛral SGS ɔ ISO sɛtifiket.

Kεmikכl Rεsistεns כf PETG

PETG de gi yusful rεsistεns to plεnti kεmikכl dεm we dεn kin kכmכn wit εn klin prodakt dεm, bכt kεmikכl rεsistεns de vεryus bכku wit kεmikכl tכp, kכnsantreshכn, tεmprachכ, εkspכzכn tεm εn strεs we dεn aplay.

Fɔ industrial gad, laboratori kɔmpɔnɛnt, rital klin ɛnvayrɔmɛnt ɔ kemikal-kɔntakt aplikeshɔn, tɛst di ɛksaktɔ PETG gred wit di tin we dɛn want bifo yu yuz am fɔ kɔmɛshɔn.

Protektiv Masking ɛn Surface Kwaliti

Klia PETG aplikeshɔn dɛn kin sɛnsitiv to skrat, dɔst ɛn sɔfays dɛfɛkt. Protektiv masking kin bi so wan impɔtant bay bay paramita fɔ displei, printin ɛn fabricated transparent prodak.

Di wan dɛn we de bay fɔ sho if dɛn nid fɔ gɛt wan sayd ɔ tu sayd protɛktiv fim, di masking adheshon lɛvɛl, if masking fɔ kɔntinyu fɔ atak we dɛn de kɔt, ɛn if dɛn fɔ pul am bifo dɛn thermoforming.

Optik-grɛd projɛkt dɛn fɔ difayn bak akseptabl skrat, blak spat, bɔbul, jel, dɔst ɛn sɔfays kɔntaminɛshɔn insay di spɛsifikɛshɔn fɔ bay.

Impɔtant Tɛknikal Paramita fɔ PETG Baya dɛn

Aw fɔ Pik wan 0.5mm PETG shit

1. Konfam 0.5mm Na di Kɔrɛkt Gej

Konsidera fainal rigiditi, fom dip, finish wol tiknes en prodak lod. wan dip tεmכfכm prodakt kin nid fכ tik stat sheet matirial .

2. Spɛsifik Rol ɔ Shit Fɔmat

Kɔntinyu thermoforming layn dɛn kin lɛk rol stok, we printin, fabrikeshɔn, protɔtayp ɛn manual fɔm aplikeshɔn dɛn kin yuz flat kɔt sheet matirial s.

3. Difayn Optik Rikwaymɛnt dɛn

Spɛsifik if standad kɔmɛshɔnal klia na infεkt ɔ if di aplikeshɔn nid kɔntrol layt transmishɔn, haz, tint ɛn sɔfayz-difɛkt limit.

4. Gi Infɔmeshɔn bɔt Tɛmofɔmin

Provayd di fɔm-mashin tayp, mold dimɛnshɔn, drɔ dip, saykl target ɛn finish-prɔdakt drɔ we thermoforming pefɔmɛns impɔtant.

5. Spɛsifik Printin ɔ Bonding

Tɛl HSQY if di PETG go bi skrin print, dijital print, lamin, kɔt, glu ɔ sɔlvɛnt bon so dat dɛn go ebul fɔ evaluate sɔfays kɔmpatibiliti.

6. Difayn Yuz insay os ɔ na do

Standard PETG na jεnarali mכr aprכpriet fכ indo aplikεshכn. Spɛsifik wan gred we gɛt UV-protɛkt usay dɛn nid fɔ de na do fɔ lɔng tɛm.

7. Kɔnfɔm di Rigyuletɔri Rikwaymɛnt dɛn

Fɔd kɔntakt, mɛdikal, flame-retardant, antistatik, UV-rɛsistant ɔ ɔda spɛshal aplikeshɔn dɛn nid di kɔrɛkt prodak gred ɛn sɔpɔtin dɔkyumentri.

Infɔmeshɔn Nid fɔ wan PETG shit Kɔt

Fɔ gɛt kɔrɛkt PETG rɛkɛmɔndeshɔn ɛn kot, duya gi:

• Featured 0.5mm tiknes ɔ ɔda gej we dɛn nid

• Tiknɛs tolɛreshɔn

• Rol wit ɔ sheet matirial dimɛnshɔn dɛn

• Klia, tint, frɔst, mat ɔ kɔstɔm kɔlɔ

• Rol ɔ sheet matirial saplae fɔmat

• Tɛmofɔmin, printin, fabrikeshɔn ɔ pak aplikeshɔn

• Mold dip ɛn thermoforming prɔses usay i apɔynt

• Rikwayd optik klia ɔ haz

• Protektiv masking rikwaymɛnt

• Print ɔ surface-treatment we dɛn nid

• Aplikeshɔn insay os ɔ na do

• UV-rɛsistɛns rikwaymɛnt if i apɔynt

• Fɔd-kɔntakt ɔ ɔda dɔkyumɛnt fɔ fala di lɔ

• Ɔda kwantiti ɛn ɛni ia dimand

• Di kɔntri we dɛn de go ɛn di pɔt

       Get PETG shit Prays & Sampul    

Pak ɛn Deliv

Klia PETG nid fɔ tek tɛm handel bikɔs skrach ɛn sɔfa kɔntaminɛshɔn kin stil de na di transparent prodak we dɔn dɔn.

HSQY kin arenj fɔ ɛkspɔt pak akɔdin to sheet matirial saiz, rol fɔmat, protɛktiv-film rikwaymɛnt, palet kɔnfigyushɔn ɛn shiping we. Di wan dɛn we de bay fɔ sho if dɛn nid fɔ mask fɔ protɛkt dɛnsɛf pan wan ɔ ɔl tu di say dɛn.

HSQY Globɛl Ɛgzibishin

HSQY de tek pat pan intanashɔnal industri ɛgzibishin fɔ mit plastic distribyushɔn, thermoforming kɔmni, pak manifakta ɛn industrial matirial bayer.

Kwaliti ɛn Sɛtifiket Dokumɛnt

Di prɔdak pej we de naw gɛt di kɔmni ɛn di prɔdak-rilayt sɛtifiket imej dɛn. Di wan dɛn we de bay fɔ kɔnfɔm us sɛtifiket ɔ tɛst ripɔt we de aplay spɛshal to di PETG gred, tik, kɔlɔ ɛn aplikeshɔn we dɛn de ɔda.

Fɔd-kɔntakt, UV-resistant, flame-retardant, antistatic, mɛdikal ɔ ɔda spɛshal klem dɛn fɔ gɛt sɔpɔt wit dɔkyumɛnt dɛn we de aplay to di aktual gred we dɛn gi.

FAQ Bɔt 0.5mm Klia PETG shit

Wetin na 0.5mm PETG sheet matirial ?

na glycol-modified copolyester sheet matirial wit nominal tiknes we na 0.5mm, we ikwal to 500 maykron. I de yuz fɔ thermoforming, pak, print, displei, kɔva ɛn fabricated transparent kɔmpɔnɛnt dɛn.

Yu tink se 0.5mm PETG sheet matirial kin bi vaykum fɔm?

Yɛs. 0.5mm PETG kin fayn fɔ laytwɛt vaykum-fɔm pat dɛn, pak, kɔva ɛn protɔtayp. Faynal suitabiliti dipen pan draw dip, mold jɔyometri ɛn rikwayd finish-wɔl tik.

PETG nid predrying bifo thermoforming?

bכku PETG tεmכfכm gred dεm kin prכsεs witout prεdray we dεn stכr dεm fayn, bכt dis na gred- εn kכndishכn-dipεndεnt. Fɔ fala di prɔsesin rɛkɛmɔndeshɔn fɔ di ɛksaktɔ rɛsin ɛn sheet matirial .

PETG klia pas PET ?

Dɛn tu matirial ya kin gi ay transparency. PETG in glycol modifyushכn na patikyula yusful fכ mεnten klia di tεm we plεnti fכm εn fכmכshכn כpεreshכn dεm de usay kristalizεshכn כ strεs waytin kin כda we bi prכsεsin kכnsεn.

Wetin na di difrɛns bitwin PET ɛn PETG ?

PETG na glycol-modified kכpoliεsta we riliyt to PET . Di modifyeshɔn chenj kristalizashɔn ɛn prɔsesin bihayvya, we de mek fayn PETG gred dɛn spɛshal yusful fɔ tɛmfɔmin, fabrikeshɔn ɛn bɔndin aplikeshɔn dɛn.

PETG bεtε pas akrilik fכ tεmכfכm?

Bɔku tɛm dɛn kin pik PETG we izi fɔ fɔm ɛn big rɛsistɛns fɔ chip ɔ krak na prɔyoritɛt. Akrilik kin bi fɔ ɔda tin dɛn we dɛn nid lɛk spɛshal optik ɔ ɔda-weda pefɔmɛns. Di kɔrɛkt matirial dipen pan di aplikeshɔn.

PETG strɔng pas akrilik?

PETG jεnarali de gi big impak tafnεs εn rεsistεns to krak pas standad akrilik, pan כl we εksakεt mεkanikal pεrformεns dipεnd pan di kכmpεr gred dεm, tiknes εn tεst mεtכd.

yu kin kot 0.5mm PETG wit naif?

Tin PETG kin skor, kɔt ɔ day-kɔt yuz fayn shap tul. Di bɛst we fɔ du tin dipen pan prodakshɔn kwantiti, ed-kwaliti rikwaymɛnt ɛn sheet matirial dimɛnshɔn.

Yu tink se PETG sheet matirial kin print?

Yɛs. PETG kin print ɛn dɛkɔret yuz kɔmpitabl ink ɛn tritmɛnt sistɛm. Ɔltɛm tɛst ink adheshon ɛn curing kɔndishɔn bifo bulk prodakshɔn.

Yu tink se PETG sheet matirial kin bond?

Yɛs. Suitabl PETG gred kin bi adhesive bonded ɔ weld yuz aprɔpriet sistem. Dɛn fɔ tɛst di adhesive kɔmpatibiliti ɛn di we aw i dɔn dɔn bifo dɛn mek am.

Na standad PETG sheet matirial UV resistant?

Standard PETG nɔ fɔ ɔtomɛtik trit am lɛk lɔng tɛm ɔdasay UV-rɛsistɛns matirial. Yuz gred we gɛt UV-stabilized ɔ UV-protected usay dɛn nid fɔ du savis na do.

Yu kin yuz PETG fɔ pak it?

Fɔd-kɔntakt PETG gred dɛn de, bɔt dɛn fɔ kɔnfyus di rigyuletɔri suitabiliti fɔ di ɛksaktɔ rɛsin, sheet matirial spɛsifikɛshɔn ɛn di dɛstineshɔn makɛt.

Wetin PETG tiknes HSQY de saplae?

Dis prodakt pej de fos pan 0.5mm. Di HSQY sɔs we de naw de list bak di kɔstɔmayz PETG tiknes frɔm lɛk 0.15mm to 7mm, we de ɔnda di prodak fɔmat ɛn aplikeshɔn.

Us PETG sheet matirial saiz dɛn de?

Di standad fɔmat dɛn we de naw inklud rol wit frɔm lɛk 110mm to 1280mm ɛn sheet matirial saiz dɛn lɛk 915×1220mm ɛn 1000×2000mm. Wi kin tɔk bak bɔt di saiz dɛn we dɛn mek fɔ yusɛf.

Wetin na di MOQ fɔ PETG sheet matirial ?

Di HSQY prodakt listin we de naw de se wan MOQ we na lɛk 1,000kg. Di kɔlɔ dɛn we dɛn kɔstɔmayt, spɛshal gred ɔ prɔdak dɛn we dɛn kɔt to saiz kin gɛt difrɛn tin dɛn we dɛn nid fɔ mek.

A kin aks fɔ PETG sampul bifo a ɔda bɔku bɔku wan?

Sampul tɛst na rikɔmɛnd fɔ thermoforming, printin, kɔt, bonding, optik-kwaliti ɛn pak trayal bifo yu bay bɔku bɔku wan.

Us infɔmeshɔn a fɔ gi fɔ PETG kot?

Gi tik, tolɛreshɔn, rol wit ɔ sheet matirial saiz, kwantiti, aplikeshɔn, tɛmɔfɔmin ɔ fabrikeshɔn prɔses, optik rikwaymɛnt, protɛktiv maskin, kɔmplians dɔkyumɛnt ɛn dɛstineshɔn pɔt.

Bɔt HSQY Plastik Grup

HSQY de saplae PETG , APET , GAG , RPET , PVC , PP ɛn ɔda plastic sheet matirial matirial fɔ thermoforming kɔmni dɛn, pak manifakta dɛn, printa dɛn, plastic fabricator dɛn ɛn intanashɔnal distribyushɔn dɛn.

PETG projɛkt dɛn kin evalyu akɔdin to tik, sheet matirial ɔ rol dimɛnshɔn, transparency, surface kwaliti, protɛktiv masking, thermoforming pefɔmɛns, printin rikwaymɛnt ɛn aplikebul rigyuletɔri dɔkyumentri.

If yu de riples wan PETG spɔlayt we dɔn de, sɛn di matirial sampul we de naw, tɛknikal data sheet matirial ɔ finish-prɔdak drɔin so dat HSQY go kɔmpia tik, optik apinans, rigiditi ɛn prɔsesin pefɔmɛns.

       Kontakt HSQY fɔ 0.5mm PETG shit